e pr s

c of e rvice sy sot& Se les te s
Operation and maintenance manual
Before using the machine, please read the attached operating instructions. Carefully read the safety rules
Veuillez lire attentivement le mode d'emploi (notamment les consignes de scurit) avant d'utiliser l'appareil.

Mode d'emploi

FOR HOUSEHOLD USE ONLY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 2 Do not touch hot surfaces. Use handles or knobs. 3 To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children. 5 Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any way. Return appliance to the nearest authorized service centre for examination, repair or adjustment. 7 The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or personal injury. 8 Do not use outdoors. 9 Do not let cord hang over edge of table or counter, or touch hot surfaces. 10 Do not place on or near a hot gas or electric burner, or in a heated oven. 11 Always turn appliance OFF, then plug cord into the wall outlet. To disconnect, turn switch to OFF, then remove plug from wall outlet. 12 Do not use appliance for other than intended household use. 13 Use extreme caution when using hot steam.

SAVE THESE INSTRUCTIONS

CAUTION
This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only. 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage. 2 Never use warm or hot water to fill the water tank. Use cold water only. 3 Keep your hands and the cord away from hot parts of the appliance during operation. 4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft cloth dampened with water. 5 For optimal taste of your coffee, use purified or bottled water. Periodic descaling is still recommended every 2-3 months.
INSTRUCTIONS FOR THE POWER SUPPLY CORD
A A short power-supply cord is provided to reduce risks of tangling or tripping over a longer cord. B Longer extension cords are available and may be used if care is exercised in their use. C If a long extension cord is used:
1 the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. 2 if the appliance is of the grounded type, the extension cord should be a grounding type 3 the cord should not hang from the table to avoid the risk of tangling or tripping.

CONTENTS

GENERAL INFORMATION...5 APPLIANCE....6

ACCESSORIES.....6

INSTALLATION....7
STARTING THE MACHINE.....7 AQUA PRIMA FILTER.....8
CONTROL PANEL....9 ADJUSTMENTS....10
COFFEE VOLUME ADJUSTMENT PER CUP....10 "AROMA" (OPTI-DOSE) INDICATES THE COFFEE DOSE PER CUP...10 DRIP TRAY HEIGHT ADJUSTMENT...10 COFFEE GRINDER ADJUSTMENT....11
COFFEE BREWING....12 HOT WATER DISPENSING...13 CAPPUCCINO.....14 DESCALING....15 CLEANING AND MAINTENANCE...17
HOW TO CLEAN THE MACHINE.....17 CLEANING THE BREW GROUP....18
TROUBLESHOOTING....19 SAFETY RULES....20 TECHNICAL DATA....22

5 GENERAL INFORMATION

This coffee machine is suitable for preparing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caused by: incorrect use not in accordance with the intended uses; repairs not carried out by authorized customer service centres; tampering with the power cable; tampering with any part of the machine; the use of non-original spare parts and accessories; failure to descale the machine or use at temperatures below 0C (32F).

IN THESE CASES, THE WARRANTY IS NOT VALID. THE WARNING TRIANGLE INDICATES ALL IMPORTANT INSTRUCTIONS FOR THE USERS SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO PREVENT SERIOUS INJURIES!
HOW TO USE THESE OPERATING INSTRUCTIONS.
Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or in case of problems, please refer to any authorized service centre.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

APPLIANCE

Coffee bean hopper Cup stacking surface Coffee bean hopper cover Power button Service door Dispensing head Coffee grounds drawer

Control panel

Drip tray + grill and oat

Hot water / steam knob

Hot water / steam spout Water tank Brew Group Drip tray

Socket for power cable

ACCESSORIES

Grinder adjustment key

Aqua Prima water lter (optional)

Power cable

Cleaning brush

INSTALLATION

STARTING THE MACHINE
Make sure the power button is not pressed and the machine is turned off. Check the machine features on the label on the bottom of the appliance. 2
Lift the cover of the coffee bean hopper.
Fill the container with coffee beans. Close the cover placing it correctly on the hopper.
Remove the water tank. We recommend installing the Aqua Prima water lter (see page 8).
Fill the tank with fresh drinking water up to the MAX level. Reinsert the tank.
Insert the plug into the socket located in the rear panel of the machine and insert the other end into a socket with suitable current.
Firmly push down the power button to turn on the machine. The machine performs a selftest.
The machine automatically primes the circuit. If this operation is not completed, proceed manually as described from step 7 to 12.
Place a container beneath the steam spout.
Press the water button. The indicator light turns on.
Turn the knob until the position is reached.

AQUA PRIMA WATER FILTER

Wait until a steady ow of water comes out of the spout.
Turn the knob until it is in the rest position ( ).

Press the water button again. The indicator light turns off. Remove the container. The machine is ready for use.
When the correct temperature is reached, the machine performs a rinse cycle of the internal circuits. A small amount of water is dispensed; during this phase, the lights ash counterclockwise. Wait for this cycle to be completed.
AQUA PRIMA WATER FILTER (OPTIONAL)
To improve the quality of the water you use, it is recommended to install the Aqua Prima lter. Before using it, leave the lter immersed in the tank for 30 minutes. 2 3
Remove the Aqua Prima lter from its packaging. Enter the date of the current month.
Insert the lter in the empty tank. The reference mark and the groove must match. Push rmly until it is completely inserted. 5
Fill the tank with fresh water. Let the lter soak for 30 minutes. After 30 minutes discard the water in the tank and rell with fresh water.
Place a container beneath the steam spout. Dispense the water in the tank using the hot water function (see page 13).
Fill the tank again with fresh drinking water. The machine is ready for use.

CONTROL PANEL

Alarm light to empty the coffee grounds drawer: permanently on: signals the need to empty the grounds drawer; this operation must be performed with the machine turned on (steps 4 and 5, page 17). Coffee dose adjusting knob (see page 10). Coffee button: slow ash:1 coffee has been selected (the button has been pushed once). quick ash: 2 coffees have been selected (the button has been pushed twice).
Hot water button: off: steam function is selected on: hot water function is selected
Ground coffee quantity button (Opti-dose) (see page 10). Alarm light: permanently on (one or more events): signals the machine is out of coffee, that the water tank is empty, or the drip tray is full. on and slowly ashing (one or more events): signals that the Brew Group is not inserted, the grounds drawer is not inserted, the cover of the coffee hopper is not closed, the service door is open. on and quickly ashing: signals the need to prime the water circuit. Descaling light: on and ashing: signals the need to perform a descaling cycle (see page 15).
Machine ready light: permanently on: signals that the machine is ready for use. on and ashing: signals that the machine is warming up. If the and lights ash alternately, switch off the machine and turn it on again after 30 seconds. If this signal appears again, contact the customer service centre.

ADJUSTMENTS

COFFEE VOLUME ADJUSTMENT PER CUP
The coffee volume knob adjusts the amount of coffee brewed per cup. This adjustment has an immediate effect on the selected type of brewing.

Medium coffee

Espresso coffee

Long coffee

"AROMA" (OPTI-DOSE) INDICATES THE COFFEE DOSE PER CUP
By pressing the key, it is possible to choose either a mild, a medium or a strong coffee. The coffee intensity is adjusted by setting the coffee quantity to be ground. Mild aroma

Medium aroma

Strong aroma
DRIP TRAY HEIGHT ADJUSTMENT
The drip tray is height-adjustable to t different sized cups. To adjust the drip tray, lift it or lower it manually until it reaches the desired height. Note: a red oat is visible in the tray; when it lifts, the tray must be drained.
11 COFFEE GRINDER ADJUSTMENT
The machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed turning the pin located inside the coffee container by means of the supplied key only. Turn the pin one setting at a time and brew 2-3 cups of coffee; the change in the grind will be noticeable after a couple of cycles. The references located inside the container indicate the grind setting.

FINE GRIND

MEDIUM GRIND

COARSE GRIND

COFFEE BREWING
The coffee brewing cycle can be interrupted at any moment by pushing the button. To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed.
Adjust the drip tray according to the height of the cup(s).
Place one cup if you want one coffee only.
Place two cups if you want two coffees.
Adjust the quantity of coffee by turning the knob. Select the aroma by pushing the button one or more times (see page 10).
Press the central button: once for 1 coffee twice for 2 coffees
The machine automatically starts brewing coffee. When the machine has nished brewing, remove the cup(s).

HOT WATER DISPENSING

Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam spout may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. 3
Adjust the height of the drip tray.
Press the button to select the hot water function. The hot water light will turn on.
Wait for the container to be lled with the desired quantity of water.
Press the hot water button.

Remove the container.

CAPPUCCINO
Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam spout may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only.
Fill 1/3 of the cup with cold milk.
Immerse the steam spout in the milk.
Froth the milk by gently rotating the container.
7 After frothing the milk, brew coffee into the cup for a creamy cappuccino. When the spout has cooled down, disassemble it and wash it carefully.

DESCALING

When performing a descaling cycle, it is necessary to be present during the entire process (about 40 minutes). Caution! Do not use vinegar as a descaler. The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling solution. Saeco descaling solution is recommended. The used solution should be disposed according to the manufacturer instructions and/or regulations in the country of use. Note: before starting a descaling cycle make sure that: 1 a container of adequate size is available; 2 if the Aqua Prima lter is used, make sure that it has been removed.
When the descaling light is ashing, a descaling cycle must be performed.
Empty the tank and rell it, dissolving the descaling solution in a full tank of water.
Place a large container beneath the steam spout.
Turn the knob until the position is reached. Dispense the descaling solution into the container for 15 seconds.
Empty the container with the used descaling solution.
Press the button to turn off the machine. After 10 minutes, turn on the machine again.
Repeat steps 3 - 8 until all the descaling solution in the tank has been dispensed.
Rinse and ll the tank with fresh drinking water.
Turn the knob until the position is reached to empty the water tank. When this operation is completed, turn the knob until it is in the rest position ( ).
Press the hot water button for 6 seconds to disable the descaling alarm.
Fill the tank again with fresh drinking water.
Once descaling has been performed: 1. Install the Aqua Prima lter, if available; 2. Prime the circuit as described on page 7, from step 7.

CLEANING AND MAINTENANCE

HOW TO CLEAN THE MACHINE
The machine must be cleaned at least once a week. Do not immerse the machine in water or place any of its parts in a dishwasher. Do not use alcohol, solvents, benzene and/or abrasive objects to clean the machine. The water left in the tank for several days must be disposed of. Do not dry the machine and/or its components using a microwave and/or conventional oven.

Turn off the machine and unplug it.
Remove the lter, if tted, and wash the water tank.
Remove the drip tray and wash it under running water.
Remove the coffee grounds drawer.
Empty the coffee grounds and the residual liquids separately. Wash all containers.
Remove and wash the steam spout. Wash all external components.
8 If the grounds drawer is emptied with the machine turned off, or when the alarm light to empty the drawer is not on (see page 9), the count of the coffee portions contained in the grounds drawer is not restarted. For this reason, the alarm light to empty drawer may illuminate even when it is not full.
Remove and wash the handgrip.
Before lling the coffee bean hopper, clean it using a soft wet cloth.

CLEANING THE BREW GROUP

The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the coffee grounds drawer as shown in g. 4 on page 17. Once you have washed and inserted the Brew Group, insert the grounds drawer and close the service door. 2 3
Press the PUSH button to remove the Brew Group.
Wash the Brew Group with running water. Wash lters carefully.
Make sure the Brew Group is in rest position; the two references must match.
Make sure the components are in the correct position. The hook shown must be in the correct position; to check its position, rmly press the PUSH button. 7
The lever on the rear part of the group must be in contact with the brew group base.
Insert the washed and dried Brew Group. DO NOT PRESS THE PUSH BUTTON.
Insert the grounds drawer and close the service door.

TROUBLESHOOTING

PROBLEMS
The machine does not turn on.

CAUSES

The plug has not been plugged into the back of the machine.

SOLUTIONS

Insert the plug into the machines power socket. Warm the cups with hot water. Clean the hole of the steam spout using a pin. Change coffee blend.
The machine is not connected to the Connect the machine to the power power source. source.
Coffee is not hot enough. Hot water or steam is not dispensed. Coffee has little crema. The machine takes a long time to warm up or the amount of water dispensed from the spout is too little. The Brew Group does not come out.

The cups are cold. The hole of the steam spout is clogged. The coffee blend is unsuitable or coffee is not freshly roasted.
The machine circuit is obstructed by Descale the machine. limescale build-up.
The Brew Group is out of place.
Turn the machine on. Close the service door. The Brew Group is automatically placed in the correct position. Remove the grounds drawer rst, then the brew group. Fill the water tank and prime the circuit again. Clean the Brew Group. Prime the circuit again by dispensing water from the steam spout.
Coffee grounds drawer is inserted. Coffee is not brewed. Water tank is empty.

Brew Group is dirty.

Circuit is not primed.
Knob to adjust the quantity of coffee Turn the knob clockwise. per cup is in wrong position. Coffee is brewed slowly. Coffee is too ne. Circuit is not primed. Change coffee blend. Decrease the dose. Prime the circuit again by dispensing water from the steam spout. Clean the Brew Group. Clean the dispensing holes with a soft cloth. Correctly place the cover on the coffee bean hopper and press it rmly.

Brew Group dirty.

Coffee leaks out of the dispensing head. Brewing does not start. Dispensing head is clogged. Coffee bean hopper cover is in wrong position.
Please contact the service centre for any problems not covered in the above table or when the suggested solutions do not solve the problem.

SAFETY RULES

IN CASE OF EMERGENCY
Immediately unplug the cable from the outlet.

USE THE APPLIANCE ONLY

Indoors. To prepare coffee, dispense hot water, froth milk or heat beverages using steam. For domestic use only. By adults in non altered psycho-physical conditions.

NEVER USE THE APPLIANCE

For purposes other than those indicated above, in order to avoid danger. Do not introduce any substances other than those indicated in the instruction manual. During the normal lling of any reservoirs, all nearby reservoirs must be closed. Fill the water tank only with fresh drinking water: Hot water and/or any other liquid may damage the machine. Do not use carbonated water. Do not put ngers or any material other than coffee beans in the coffee grinder. Before manipulating the coffee grinder, turn off the machines main switch and unplug the cable.

POWER CONNECTION

Only connect the coffee machine to a suitable power socket. The voltage must correspond to the indication on the machines label.
Choose a level surface. Do not place on heated surfaces! Allow a distance of 10 cm / 4" between walls and cooking hotplates. Do not keep the machine at temperatures below 0C / 32F danger of freezing damage. There must be easy access to the socket at all times. The power cable must not be damaged, tied up with clamps, placed on very hot surfaces, etc. The power cable must not hang. (Danger of tripping or dropping the appliance). Do not use the power cable to carry or pull the coffee machine.

DANGER

The appliance must not be used by children and persons who have not been informed on its operation. The appliance is dangerous to children. If left unattended, please disable it. Do not leave the coffee machine packaging within the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. Do not insert objects through the appliances openings (Danger! Electrical current!). Do not touch the plug with wet hands and feet. Do not remove the plug by pulling the cable. Warning, danger of burns caused by hot water, steam and hot water/steam spout.

FAILURES

- Do not use the appliance in case of sure or suspected faults such as after falls. - Any repairs must be performed by an authorized customer service centre. - Do not use the appliance with a defective power cable. If damaged, the power cable must be replaced by the manufacturer or authorized service centre. (Caution! Electrical current). - Turn off the appliance before opening the service door.

CLEANING / DESCALING

- Before cleaning, unplug the machine and let the appliance cool. - Keep the appliance from coming into contact with splashes of water or immersing in water. - Do not dry the machines parts in conventional or microwave ovens.

SPARE PARTS DISPOSAL

For safety reasons, use only original spare parts and original accessories.
- The packing materials can be recycled. - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility. This product complies with EU Directive 2002/96/EC.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofce, your household waste disposal service or the retailer where you purchased the product.

Saeco International Group Via Torretta, Gaggio Montano Bologna - Italy Tel.:+11 Fax: +info@saeco.com www.saeco.com
No responsibility is taken for the correctness of this information.
Super classy. Super automatic. The Saeco Odea Line.
The Saeco Freshness Promise
We have placed a renewed focus on the fundamental elements of excellent coffee creating ideas that will elevate your enjoyment to a new dimension. The first dimension: fresh beans for every cup. For each cup whole coffee beans are freshly ground to achieve a truly authentic coffee taste. The second dimension: crystal clear water for the brewing process. Only in perfectly pure water the beans aroma can fully unfold thats why every Saeco is equipped with a water filter by world market leader Brita. The third dimension: special treatment for our milk. With the Milk Island, Touch2Cappuccino and Pannarello milk froth dreams come true. To us it is the Saeco Freshness Promise. To you it is a new dimension of enjoyment.

Saeco Odea Line

A vision of enjoyment.
Welcome to a delight ahead of its time: The Odea Line is characterised by a new touch of purity. Inviting ergonomics and accentuated colours offer visionary design for the epicure who prefers a sovereign style. Equipped with features of equal brilliance the fully automatic coffee machines in the Odea Line make your vision of pure coffee enjoyment come to life every day.
Always just right the Saeco Adapting System.
With this new feature our machines can automatically adjust to every kind of coffee bean to guarantee the ideal amount of ground coffee is used every time. Because only the exactly right dose allows the coffees aroma to completely unfold. After preparing just a few cups, the Saeco Adapting System has already adjusted to your coffee beans and you enjoy an even more intense coffee experience.

Odea Giro Plus

Odea Giro Grey

Odea Giro Orange

Odea Go
Where functionality meets design.
Odea Giro Plus The lines top model features all the technical highlights of the Odea Giro such as the Giro interface, Rapid Steam, Opti-Dose, adjustable drip tray and the cup surface. Additionally the Odea Giro Plus is equipped with an enhanced pannarello made of stainless steel. This eye-catcher ideally matches the uniquely classy Titanium/Silver housing enhancing the atmosphere in every kitchen. Odea Giro Grey Also operated via the Giro interface and equipped with pannarello the elegant and classy Grey/Silver Odea Giro is another paradigm in usability. Within seconds steam for frothing up your milk is available thanks to Rapid Steam. The cup surface and the height-adjustable drip tray furthermore increase this models convenience. And with Opti-Dose you can individually set the amount of ground coffee you want to use for the brewing process. Odea Giro Orange The Odea Giro Orange features the same highlights as the Odea Giro Grey. The only difference: its futuristic and stylish appearance in Orange/Silver. Odea Go This model is the purist entry level of the Odea line. With the aid of the Giro interface delicious coffee is conveniently prepared and milk froth specialties like latte macchiato are also quickly available thanks to the pannarello. And you can manually adjust the drip trays height to any cup or glass which can be stored comfortably on the cup surface.

User-friendly interface

Cup holding surface

Whole beans

Ergonomic Design

Pannarello

Drip tray
Tomorrows features for your everyday enjoyment.
From pure espresso enjoyment to the delight of milk froth specialties like latte macchiato and cappuccino the machines in the Odea Line bring you fresh enjoyment every day thanks to their complete package of progressive features. User-friendly interface Rotary chrome knob and indicator lamps give the Giro Interface supreme usability with a stylish appearance. With this interface everything works just beautifully. Ergonomic design Accentuated colours and inviting ergonomics offer visionary design that will please all coffee epicures who prefer a sovereign style. Energy Safe Drip tray For your convenience you can change the height of the drip tray. With this functionality you always have the cup right below the coffee outlet. When your Saeco is idle for a while Energy Safe is automatically activated. The machine is set on stand-by to run even more economically. Pannarello If you prefer the manual foaming of your milk the pannarello is the ideal way to make your milk froth dreams come true. Whole beans For each and every cup whole beans are ground. This guarantees you fresh coffee enjoyment with every sip.
Technical data Simultaneous preparation of two cups Giro Interface Adjustable servings Rapid-Steam Hot water/steam nozzle Pannarello material Adjustable drip tray Maximum cup height Saeco Aroma System pre-brewing function Removable brewing unit Rinse and cleaning program Cup holding surface Ceramic grinder Adjustable grinding level (by key) Saeco Adapting System Opti-Dose Energy Safe Water filter Intenza Swivel wheels Bean container capacity Capacity of ground coffee container Removable water tank capacity Housing material Boiler material Pump pressure Power rating Volt/Watt Weight of machine (including packaging) Machine dimensions (WxDxH) Colour Warranty on brewing group Warranty on complete machine

Odea Giro

stainless steel manual 140 mm 5 levels 710.5 g optional 180 g 14 servings 1.5 l ABS Plastic stainless steel 15 bar 230 V/1300 W 10.5 kg 290 x 385 x 370 mm Titanium/Silver 5 years 2 years
plastic manual 140 mm 5 levels 710.5 g optional 180 g 14 servings 1.5 l ABS Plastic stainless steel 15 bar 230 V/1300 W 10 kg 290 x 385 x 370 mm Orange/Silver 5 years 2 years
plastic manual 140 mm 5 levels 8.5 g optional 180 g 14 servings 1.5 l ABS Plastic stainless steel 15 bar 230 V/1300 W 10 kg 290 x 385 x 370 mm Grey/Silver 5 years 2 years