HARDNESS MENU ON PAGE 21.

SETTING THE LANGUAGE

When the machine is switched-on for the rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used. This is why some languages are differentiated also by country.

english language

water filter inserted yes
Select the language by navigating the click wheel with your nger.
When the desired language is displayed, press. The machine now displays the messages in the selected language.
The machine displays the following menu. Wait before making the selection.
In this phase you must decide whether to install the water lter. Its use is recommended by Saeco. The water lter puries water and allows you to taste the full aroma of coffee. If you want to install the water lter, go to page 7.

water filter inserted no

press ok boiler filling
1. 2. Otherwise, select and press. Press to prime the circuit; wait until the machine stops.

warming up please wait

rinsing please wait
strong aroma espresso coffee 08:33
When the priming is completed, wait until the machine has nished the heating phase.
Once the heating phase is completed, a small quantity of water is dispensed. Wait for this cycle to be completed automatically. Refer to page 21 to enable/disable the function.
The screen for product dispensing appears on the display.

INTENZA WATER FILTER

To improve the quality of the water you use, and extend the life of your machine at the same time, it is recommended that you install the water lter. After installation, go to the water lter initialization program (see programming). In this way, the machine informs the user when the water lter must be replaced. Remove the water lter from its packaging, immerse it vertically (with the opening facing upwards) in cold water and gently press its sides so as to let the air bubbles out.
Remove the small white lter from the tank and store it in a dry place sheltered from dust.
Set the Intenza Aroma System: A = Light water B = Medium water (standard) C = Hard water For further details see page 21
Insert the lter in its place within the empty tank (see gure); Press down until it clicks into place.
Fill the tank with fresh drinking water and reinsert it into the machine.
Place a container under the spout.

push ok initialisation

in progress initialisation

done initialisation

again.
The machine initialises the lter.
Then, press repeatedly. When the exit message is displayed, press. In this way, the machine ends the start-up phase. Wait until at the end of the procedure, the display shows what is shown on page 8. NOTE: if the Intenza water lter is not available, insert the small white lter previously removed (see point 1) into the tank.

DISPLAY

Enter the programming menu
Select dispensing of beverages with milk

Click wheel

Conrmation key
Select the coffee bean dose or the quantity of preground coffee
Hot water brewing selection key

Press the complete.

key twice to make 2 cups. This operation can be performed until the grinding is Press twice
strong aroma double espresso 08:33
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage has been chosen, the machine automatically manages milk dispensing.

COFFEE AROMA

By pressing the key, there are three possible selections (strong, medium, mild) that indicate the aroma (coffee quantity to be ground by the machine) for the beverage selected. This key enables you to select also the ground coffee function.
strong aroma espresso coffee 08:33 medium aroma espresso coffee 08:33 mild aroma espresso coffee pre-ground espresso coffee 08:33 08:33
SELECT THE DESIRED AROMA BEFORE DISPENSING THE BEVERAGE.

ADJUSTMENTS

COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.

SBS SAECO BREWING SYSTEM

SBS adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee.

MEDIUM COFFEE

MILD COFFEE

STRONG S COFFEE C

ADJUSTING THE HEIGHT OF THE DRIP TRAY
Adjust the drip tray before dispensing any beverages. Height-adjustable drip tray. To raise the drip tray, press lightly on the lower part of the button. To lower the tray, press lightly on the upper part of the button; when the desired height is reached, release the button. Note: there is a red oater in the drip tray. When it rises, the tray must be emptied and washed.
FILLING THE MILK CONTAINER
The container with the cappuccinatore must be lled before preparing any milk beverage. Do not use milk after the best-before date. (Important! Refer to the instructions for maintenance and cleaning of the cappuccinatore on page 38).
Open the milk compartment by pressing the button and remove the milk container.
Remove the cover and pour in the milk. DO NOT EXCEED THE MAXIMUM LEVEL shown in the gure.
Replace the lid on the container and place it back in the milk compartment. Make sure to carefully close the compartment.

BEVERAGE DISPENSING

THE DISPENSING OF COFFEE, HOT WATER AND MILK MAY BE STOPPED AT ANY TIME BY PRESSING THE KEY AGAIN. THE DISPENSED MILK MAY BE VERY HOT: DANGER OF SCALDING. AVOID TOUCHING IT DIRECTLY WITH YOUR HANDS. THE USED MILK HAS TO BE PROPERLY PRESERVED. DO NOT USE IT AFTER THE BEST-BEFORE DATE SHOWN ON THE PACK AGE.

Check that all the containers are clean. To do this operation, follow the instructions in the Cleaning and Maintenance chapter (see page 37)
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED BY CLEANING THE CONTAINER AND THE MACHINES CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage has been chosen, the machine automatically manages milk dispensing.
ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, select it by sliding the click wheel with a nger. Use appropriate espresso or coffee cups so that the coffee will not overow.
brewing in progress espresso coffee
Select the desired beverage by navigating the click wheel with your nger.
Select the coffee aroma by pressing the key one or more times.
Press the key once for 1 cup and twice for 2 cups. The selected beverage will be brewed.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is possible to customize this quantity. See page 16.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the Beverage programming chapter on page 16). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. In the example given below, we chose to dispense an espresso using pre-ground coffee. The customized choice of using pre-ground coffee is shown on the display.
pre-ground espresso coffee 08:33
add pre-ground coffee espresso coffee
2. 1. Select the desired beverage by navigating the click wheel with your nger. Select the function by pressing the key one or more times. Press the key. A message appears, reminding the user to pour ground coffee in the appropriate compartment.
Pour ground coffee in the appropriate compartment using the measuring scoop provided in the accessories.

Press the brewing.

key to start
Note: After 1 minute from when the message appears (2), if brewing has not started the machine will return to the main menu and dump any inserted coffee into the coffee grounds drawer If no pre-ground coffee is poured into the compartment, only water will be dispensed If 2 or more scoops of coffee are added, the machine will not dispense the beverage and the coffee in the compartment will be dumped into the coffee grounds drawer.

LATTE MACCHIATO

SEE INSTRUCTIONS ON PAGE 38 FOR OPTIMAL MILK DISPENSING Fill the milk container
strong aroma latte macchiato 08:33

Press the

Select latte macchiato by navigating the click wheel with your nger.
Select the aroma by pressing the key one or more times.
brewing in progress latte macchiato
add milk? latte macchiato
rinsing milk circuit latte macchiato 08:33
Press the key once for 1 cup and twice for 2 cups. The latte macchiato will be brewed.
After this, the machine allows you to dispense more milk if you wish. This option remains active for approx. 3 seconds. To activate it, press the button. Once the desired quantity has been reached, press the button again to stop dispensing.
The machine will propose cleaning the milk circuits. Press the key to clean the internal circuits.
If the user wishes to continue preparing other drinks the machine will keep the rinsing milk circuit signal active. After 20 minutes of inactivity, the machine requires the user to perform a rinsing cycle as described in Step 7. If the machine is turned off immediately after dispensing a milk beverage, the next time the machine is turned on it will require the user to perform a rinsing cycle. Note: Before performing the milk rinsing circuit function make sure that: 1. a large enough container is positioned under the dispensing spout; 2. the water tank contains a sufcient quantity of water.
milk circuit washing espresso coffee 08:33
After 14 days from the rst dispensing of a milk-based beverage, the message milk circuit washing is displayed; it is advisable to clean the milk circuits as shown on page 25. After another 7 days the machine stops dispensing milk-based beverage only and the milk circuits must be washed; during this phase, coffee and hot water may be dispensed.

rinsing milk circuit

in progress milk circ. rinse cycle

Press cycle.

to perform the rinse
In this phase the user cannot intervene and must wait until the cycle nishes. After this, the machine returns to the main menu.
Remove the container, rinse and dry.
THIS PROCEDURE MUST BE PERFORMED FOR ALL MILK BEVERAGES! AFTER USE, ALWAYS REMOVE THE MILK CONTAINER AND PUT IT IN THE REFRIGERATOR IF IT CONTAINS REMAINING MILK.
remove milk espresso coffee 08:33
After performing the rinse cycle, the machine reminds the user to remove the container with the remaining milk through the message remove milk.
REMOVE THE MILK CONTAINER ONLY WHEN THE MACHINE IS ON.
THE CONTAINER MAY BE LEFT IN THE MACHINE ONLY IF IT HAS BEEN WASHED WITH DRINKING WATER AND IT DOES NOT CONTAIN MILK (SEE PAGE 38).

ESPRESSO MACCHIATO

Fill the milk container
strong aroma espresso macchiato 08:33
Select espresso macchiato by navigating the click wheel with your nger.
add milk? espresso macchiato
When the milk circuit rinsing symbol ashes, rinse the milk circuits as described for the latte macchiato (see page 12, step 6).
key once or twice Press the to start brewing.
If you wish, press the button. Once the desired milk quantity has been reached, press the button again.

CAPPUCCINO

strong aroma cappuccino 08:33
Select cappuccino by navigating the click wheel with your nger.
brewing in progress cappuccino

add milk? cappuccino

If you wish, press the button. Once the desired milk quantity has been reached, press the button again. Fill the milk container

DISPENSING HOT MILK

hot milk 08:33

add milk? hot milk

1. 2. Press the key. Select the hot milk and press the key. If you wish, press the button. Once the desired milk quantity has been reached, press the button again.
Repeat the operation to brew another cup of milk. When the rinsing milk circuit symbol ashes, rinse the milk circuits as described for the latte macchiato (see page 12, step 6).

HOT WATER DISPENSING

AT THE START, SHORT SPURTS OF HOT WATER MAY BE DISPENSED WHICH POSE A RISK OF SCALDING. THE HOT WATER SPOUT CAN REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS.

hot water 08:33

brewing in progress hot water
The machine brews the preset water quantity. Press the key after brewing, to exit the Hot water function.

Press the key brewing.

to start

BEVERAGE PROGRAMMING

Every beverage can be programmed according to your own tastes.
1. PROGRAMMING FOR SELF-INSTRUCTING
For all beverages you can quickly program the quantity of coffee and/or milk dispensed in the cups whenever the key is pressed. Select the type of beverage you want to program, then press and hold the key until the display shows (for example): self-instruction active

espresso coffee

The machine dispenses coffee or milk. When the desired amount is reached, press the The display will show: new quantity saved

key again.

(Only beverages with coffee and milk): for beverages with coffee and milk, you need to save the desired quantity of both milk and coffee by pressing the button. This adjustment must be performed during the relevant dispensing phase in the normal beverage dispensing process. The dispensed quantity of coffee and/or milk remains stored and replaces any previous settings.

MACHINE SETTINGS

To set the general machine operating parameters, press the settings. Turn the click wheel with a nger to:
machine settings language

key and select machine

machine settings acoustic alerts
set the language of the menus.
machine settings water filter
set/activate the acoustic alarms.
machine settings maintenance
set the machine operation through the water lter
machine settings water hardness
clean the machine internal circuits.
machine settings clock settings

set the water hardness.

machine settings rinse cycle

set the clock.

machine settings stand-by setting
set the circuit rinse cycle.
machine settings cup warming plate
set the standby and the timers.
set the operation of the cup warming plate. To exit any level of machine settings without saving the changes made, press the key. For example:

LANGUAGE MENU

> machine settings > language. To change the language of the display.

deutsch sprache

1. 2. Select the desired language. After this, the machine displays all the messages in the language selected.
> machine settings > cup warming plate. To turn on/off the operation of the cup warming surface located on the top of the machine. A warm cup allows you to fully savour the coffee and taste its full aroma.

CUP WARMER MENU

3 Select by navigating the click wheel with your nger. It is possible to set: - always on - always off - off in stand-by
Press the button to save.

WATER FILTER MENU

> machine settings > water filter. This function provides better management of the lter notifying the user when the lter is to be replaced. This function must: activated when you wish to use the water lter; deactivated when you do not wish to use the water lter.
water filter water filter activation
1. 2. The lter control can be activated or deactivated from this menu.

4 Select by navigating the click wheel with your nger. It is possible to set: - on
- off Press the button to save.
water filter initialization
Refer to the lter initialisation procedure described on page 7. 2.
A newly installed lter can be initialised from this menu.

RINSE MENU

> machine settings > rinse cycle. To clean the internal tubes in order to guarantee that the beverages are dispensed only with fresh water. This function has been enabled by the manufacturer on all new appliances.
3 Select by navigating the click wheel with your nger. It is possible to set: - yes
- no Press the button to save.
Note: This rinse cycle is performed every time the machine is turned on after the warming phase.
WATER HARDNESS MENU - INTENZA AROMA SYSTEM
> machine settings > water hardness. With the Water hardness function you can adjust your machine and the Intenza water lter to the level of hardness of the water you use, so that the machine will request descaling at the right moment. The water hardness in the Intenza water lter is expressed on a scale from A to C. The water hardness in the machine is expressed on a scale from 1 to 4.

Intenza Aroma System B A

1 Immerse the water hardness tester (included in the accessories) for one second in water. The test can be used only for one measurement.
4 Machine water hardness setting
Check the water hardness level obtained from the test. The measurement can be used to set the Intenza Aroma System correctly (see page 7). Matching parameters are described on the upper part.

3 + water hardness

1. 2. Set and store the water hardness according to the value on the tester.
> machine settings > acoustic alerts To enable/disable the acoustic alarms of the machine.

ACOUSTIC ALARM MENU

acoustic alerts key tone
Select by navigating the click wheel with your nger. You may set: - key tone: to activate/deactivate a tone each time a key is pressed. - milk quality warning: to activate/deactivate a tone when the milk container has been in the machine for too long. - confirmation tone: to activate/deactivate a tone to conrm that a command (beverage saved, etc.) has been performed. - milk circ. rinsing tone: to activate/deactivate a tone when the machine requires milk circuit cleaning. - milk circ. rinse warning: to activate/deactivate a tone when the milk circuits have to be rinsed.

button to save.

MAINTENANCE MENU
> machine settings > maintenance. To clean all the machines internal circuits used for making coffee and milk. Turn the click wheel with your nger to:
maintenance milk circ. rinse cycle maintenance coffee cleaning cycle
rinse the milk circuits after making the beverages.
maintenance milk cleaning cycle

clean the brew group.

maintenance descaling cycle
thoroughly clean the milk circuits. This must be performed after a xed time has elapsed from the rst dispensing.
Perform the descaling cycle.

Milk circuit rinse cycle

> machine settings > maintenance > milk circ. rinse cycle To rinse the machines internal circuits used for preparing milk. This short cycle must be necessarily performed after 20 minutes from the last dispensing of a beverage with milk. If it is not performed, the machine comes to a halt and does not allow the dispensing of milk beverages. Note: before performing this function make sure that: 1. a large enough container is positioned under the spout; 2. the milk container has been correctly inserted in the machine; 3. the water tank contains a sufcient quantity of water.
maintenance milk circ. rinse cycle
yes milk circ. rinse cycle
AFTER USE, ALWAYS REMOVE THE MILK CONTAINER AND PUT IT IN THE REFRIGERATOR.
The container may be left in the machine only if it has been washed with drinking water and it does not contain milk; see page 38.
Wait for the cycle to complete.
> machine settings > maintenance > coffee cleaning cycle

Coffee wash cycle

To clean the machines internal circuit used for brewing coffee. To wash the Brew Group, simply clean with water as shown on page 40. This wash completes maintenance of the Brew Group. Packages of Saeco detergent tablets may be purchased at your local dealer or by Authorized Service Centres. It is advisable to perform this wash cycle after 500 coffee brewing cycles, or monthly. Note: before performing this function make sure that: 1. a large enough container is positioned under the spout; 2. the appropriate tablet for cleaning the brew group has been inserted into the compartment for pre-ground coffee; 3. the water tank contains a sufcient quantity of water THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION.
maintenance coffee cleaning cycle
yes coffee cleaning cycle
insert cleaning tablet coffee cleaning cycle

Remove the milk container.
fill with water milk cleaning cycle
push ok milk cleaning cycle
rinsing milk cleaning cycle
Rinse the container and ll it with fresh water.
Insert the container and press.
When the rinse cycle is nished the following appears
Perform another rinse cycle as shown previously. At the end, press the key.
> machine settings > maintenance > descaling cycle

Descaling cycle

To perform the automatic descaling cycle. Descaling is necessary every 2-3 months, depending on the volume of use and hardness of the local water supply.The machine must be turned on and will automatically manage the distribution of the descaling agent. A PERSON MUST BE PRESENT DURING THE OPERATION. WARNING! NEVER USE VINEGAR AS A DESCALER. Saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturers instructions and/or according to regulations in force in the country of use. Note: Before beginning the descaling cycle make sure that: 1. a container of adequate dimensions is positioned under the water spout and dispensing head; 2. THE WATER FILTER HAS BEEN REMOVED. 3. The water tank has been lled with the descaling solution up to the level indicated with. Pause descaling. The descaling and/or rinsing can be paused and then restarted. When descaling is interrupted the machine will warn the user that it must be turned off. WARNING! DESCALING MUST BE COMPLETED WITHIN 24 HOURS FROM ITS INTERRUPTION. The next time the machine is turned on, the machine will warn the user that the descaling and/or rinse process must be completed.
descale espresso coffee 200 08:33

descale

The machine will indicate the need to perform a descaling cycle through a ashing message. This message is displayed 200 beverages before descaling must be performed. Each time a beverage is dispensed, the machine will count down the number of remaining beverages, which will be displayed on the right. When 30 beverages remain, the display will begin to ash.

1. 2. Set by navigating the click wheel with your nger. Save using the button.

Time format

> machine settings > clock settings > time format To set the time view mode. The modication of this setting adjusts all the parameters that require viewing/ setting the time.
clock settings time format

am/pm time format

The machine also allows displaying the time in the international format (24h). 2.
> machine settings > stand-by setting

STANDBY SETTING

In this menu you can:
stand-by setting energy saving stand-by setting timer setting
set the energy saving mode (time that must elapse from the last beverage made before the machine switches to energy saving mode).
set the timers (activation of on/off times setting one on/off time a day)

Energy saving

> machine settings > stand-by setting > energy saving By default, the off delay is set to 3 hours.
stand-by setting energy saving
after 3 hours energy saving
3 Select by navigating the click wheel with your nger. It is possible to set: - after 15 minuters - after 30 minuters - after 1 hour - after 3 hours Press the button to save.

Timer setting

> machine settings > stand-by setting > timer setting The timers can operate only if activated by the timer activation function. If this is not the case, the timers will have no effect on the machine.

1. Activating the timers

timer setting timer activation

no timer activation

You can set: - yes (the machine turns on and off at the times set) - no (the machine ignores the times set) Press the button to save.
2. Setting an interval for turning on the machine
You can set an on/off time for each day of the week (in this case, the procedure for setting an interval for Monday is displayed).
stand-by setting timer setting

timer setting monday

monday switch on
08h (am) + switch on monday
00 min + switch on monday
1. 2. Set the turn on time by navigating the click wheel with your nger.
1. 2. Set the turn on minute by navigating the click wheel with your nger.

monday switch off

09h (am) + switch off monday
00 min + switch off monday
1. 2. Set the turn off time by navigating the click wheel with your nger.
1. 2. Set the turn off minute by navigating the click wheel with your nger.
You can set the on/off times for all the days of the week.
Press to exit the programming of the selected day.
Navigate the click wheel with your nger to select the other days you want to program.

SPECIAL FUNCTIONS

This menu allows you to access special functions present on the machine. To access, press the key and select special functions. Turn the click wheel with a nger to:

DANGERS

Children should be supervised to ensure that they do not play with the appliance. The appliance is dangerous to children. When left unattended, unplug from the electrical outlet. Keep the coffee machine packaging out of the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. Do not insert objects through the appliances openings. (Danger! Electrical Current!). Do not pull out the plug by yanking on the power cord or touching it with wet hands. Warning. Danger of burning when in contact with hot water, steam and the hot water spout.

FAILURES

Do not use the appliance if a failure has been veried or suspected, for example after being dropped. Any repairs must be performed by an authorized customer service center. Do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. (Caution! Electrical Current!) Turn off the appliance before opening the service door. Danger of burns!

CLEANING / DESCALING

Clean the milk circuit only with the recommended detergent powder supplied with the machine. Carefully follow the safety instructions given on the packaging. Clean the coffee circuit only with the recommended detergent tablets supplied with the machine. Carefully follow the safety instructions given on the packaging. Before cleaning the machine, the main switch must be turned to OFF (0), unplugged from the socket and cooled down. Keep the appliance from coming into contact with splashes of water or immersing in water. Do not dry the machines parts in conventional or microwave ovens. The machine and its components must be cleaned and washed after the machine has not been used for a certain period.

REPLACEMENT PARTS

For safety reasons, use only original replacement parts and original accessories.

WASTE DISPOSAL

- The packing materials can be recycled. - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility
This product complies with EU Directive 2002/96/EC. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofce, your household waste disposal service or the shop where you purchased the product.

FIRE SAFETY

In case of re, use Carbon Dioxide extinguishers (CO 2). Do not use water or dry-powder extinguishers.

TECHNICAL DATA

ADDITIONAL INFORMATION FOR THE CORRECT USE OF THE INTENZA WATER FILTER
To correctly use the Intenza water lter, please consider the following instructions: 1. Store the water lter in a cool area in which the room temperature is between +1C - +50C (34F to 122F). Do not store it in direct sunlight. 2. Carefully read the operating instructions and the safety warnings provided with each lter. 3. Keep the lter instructions together with the manual. 4. These instructions integrate those contained in the manual, as they focus on the specic application of the lter in the machine.
Nominal voltage Power rating Power supply Shell material Size (w x h x d) Weight Cord length Control panel Water tank Milk Tank Coffee Bean Hopper Capacity Pump pressure Boiler Coffee grinder Pressure safety device Temperature safety device See label on the appliance See label on the appliance See label on the appliance Plastic 355 x 380 x 460 mm - 13.8 x 15.4 x 16.Kg - 30.9 lbs 1200 mm - 42.2 Front (display 2x24) 2 liters - 68 oz. / Removeable ca. 0.400 liters - 12.5 oz. / Removeable 350 grams - 8.9 oz. / of coffee beans 15 bar Stainless steel Ceramic Boiler pressure safety valve Boiler thermostats and thermal fuses
Subject to engineering and manufacturing changes due to technological developments. The machine conforms to European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.
EC DECLARATION OF CONFORMITY EC 2006/95, EC 2004/118, EC 1992/31, EC 1993/68
SAECO INTERNATIONAL GROUP S.P.A
- Via Torretta, 240 - 40041 Gaggio Montano (Bo) - Italy declare under our responsability that the product: AUTOMATIC COFFEE MAKER

SUP 030 ND

to which this declaration relates is in conformity with the following standards or other normative documents :
Safety of household and electrical appliances - General requirements EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006) Safety of household and electrical appliances - Part 2-15 Particular requirements for appliances for heating liquids EN 60335-2-15(2002) + A1(2005) Household and similar electrical appliances - Electromagnetic elds - methods for evaluation and measurement EN 50366 (2003) + A1 (2006). Household and similar electrical appliances - safety - Part 2-14 Particular requirements for kitchen machines EN 60335-2-14 (2006). Electromagnetic compatibility (EMC) - Requirements for household appliances , electric tools and similar apparatus - Part 1 Emission EN 55014-1 (2000) + A1 (2001) + A2 (2002). Electromagnetic compatibility (EMC) Part. 3^ Limits - Section 2 : Limits for harmonic current emissions (equipment input current 16A for phase) - EN 61000-3-2 (2000) Electromagnetic compatibility (EMC) Part 3^ : Limits - Section 3 : Limitation of voltage changes , voltage uctuations and icker in public low - voltage supply systems , for equipment with rated current 16 A for phase and not subject to conditional connection EN 61000-3-3 (1995) + A1 (2001) Electromagnetic compatibility - Requirements for household appliances , electric tools and similar apparatus - Part 2. Immunity - Product family standard EN 55014-2 (1997) + A1 (2001)

Following the provision of the directives: EC 73/23, EC 89/336, EC 92/31, EC 93/68

R & D Manager

Gaggio Montano - li, 27/06/2007 Mr. Andrea Castellani
Saeco International Group S.p.A. Via Torretta, 240 I-40041 Gaggio Montano, Bologna Tel: + 771111 Fax: + 31025 www.saeco.com
The manufacturer reserves the right to change the features of the product without prior notice.
Saeco International Group S.p.A.

Type SUP030ND

Cod.15001343 Rev.00 del 15-09-07

Primea: A Masterpiece in Design and Innovation
Saeco, the world leader in automatic espresso machines, offers you an ultra automatic machine producing maximum taste with a bold and impressive statement. Thanks to superior innovations in design and technology, the Primea line prepares espresso with perfect crema, aroma and flavor every time. Prepare every type of coffee to appeal to your senses, such as espresso, cappuccino, latte macchiatto and many more. The Primea line combines exclusive technology with top of the line style and sophistication. The Saeco Advantage: Advanced Display Panels: A large color touch screen with sensitive touch technology or a LCD display screen with click-wheel technology both allow you to easily operate and program your machine. Touch2Cappuccino: Prepare two cappuccinos with just one touch with the built-in Cappuccinatore. Saeco Brewing System (SBS): Make an infinite variety of coffees from one machine with just the twist of a dial. Cup Illumination: A soft light will turn off and on with just the touch of a button to spotlight the drink being brewed.
Features Display Programmable Drink Options Temperature Control Cup Warming Surface Removable Brew Group Automatic Decalcifying Cycle Rapid Steam Insta Steam Frothing Device Touch2Cappuccino Cup Illumination Hot Water Dispenser Saeco Brewing System (SBS) Saeco Aroma System Saeco OptiDose Built-In Grinder Adjustable Grinder Pre-Ground Bypass Doser Adjustable Dispensing Head Adjustable Drip Tray Base Removable Water Tank Aqua Prima Water Filter Bean Hopper Capacity Used Grounds Capacity Boiler Material Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP
Primea Touch Plus color touch screen 6 beverages
Primea Ring LCD display 6 beverages

active

Cappuccinatore (built-in)
7 - 10.5 gr. capacity ceramic disc
motorized sliding wheels 62 oz
10 oz 24 pucks stainless steel ABS plastic 14W x 18D x 15H 33 lbs. 7-08461-80000-year
10 oz 24 pucks stainless steel ABS plastic 14W x 18D x 15H 33 lbs. 7-08461-00002-year
For more information, please contact: Saeco USA 7905 Cochran Road, Suite 100, Glenwillow, OH 44139 Tel: (800) 933-7876 Fax: (440) 542-9173 www.saeco-usa.com
Talea: A New Line of Taste.
From any point of view, the Talea line is a delight to your eyes and your tastebuds. Exclusively designed by BMW Designworks USA, the Talea line features the elegant color combination of silver and titanium. All the traditional tastes of Saeco are included in these new machines with an ergonomic shape and advanced technology. The stunning exterior and high-tech interior make all of the Talea models a pleasant delight.
The Saeco Advantage: Milk Island: The Milk Island prepares a creamy froth in just a few seconds with the simple twist of a dial. User Friendly Interface: Brew the perfect espresso easily at the touch of a button. Rapid Steam: Rapid Steam technology reduces normal waiting time between brewing coffee and steam output to just a few seconds. Cup Warming Surface: Keep your cups and espresso at an optimal temperature while enhancing the full flavors and aromas extracted from the coffee beans.
Talea Touch b/w touch screen 3 beverages
Talea Ring Plus LCD display 3 beverages
Talea Giro indicator lights passive
Milk Island & Pannarello -
Milk Island (optional) & Pannarello -
motorized sliding wheels 57 oz
manual sliding wheels 57 oz
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00016-year
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00017-year
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00018-year

Espresso Italiano Line

Bringing the caf into your own home has never been easier than with the Espresso Italiano. Just add whole beans and water, and instantly you will have a perfectly extracted espresso. With state-of-the-art technology, including a tri-colored digital display screen that helps to easily identify the machines functions, you can make all of your favorite espresso-based drinks, including cappuccino, latte and Americano. Every cup of coffee is freshly ground, dosed, tamped, and brewed with consistent high quality in one cycle, all at the push of a button. The Saeco Advantage: OptiDose: Adjustable 6-9 gram doser to regulate the amount of beans to grind per serving. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Rapid Steam: No waiting between frothing milk with the Pannarello attachment and brewing espresso. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Espresso Italiano tri-colored digital display 2 -

Pannarello -

6 - 9 gr. capacity conical burr

swivel base 57 oz optional 8 oz 14 pucks stainless steel ABS plastic 13W x 19D x 14.5H 20 lbs. 7-08461-10004-year

Odea: Meet the Future.

The Odea line is characterized by a new touch of purity. Its design is made to please all coffee lovers, who prefer a beautiful, stream-lined style. The parts of the machine are prominently placed to simplify every choice in the coffee making process. The Odea line is built with Saeco quality, and technical innovations that are truly state of the art. Dressed to impress, these models are just hot.
The Saeco Advantage: Steam/Hot Water Wand: The long Pannarello steam wand can froth milk in almost any sized container, and also dispenses hot water. Giro Interface: It is easy to choose the amount and aroma of coffee to brew with just one turn of the dial. Adjustable Drip Tray: The manual drip tray is easily raised or lowered with just a light push. Ceramic Disc Grinder: Provides an even, consistent grind every time.
Odea Giro (Grey) indicator lights passive
Odea Giro (Orange) indicator lights passive
Odea Go indicator lights passive

ceramic disc

manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00022-year
manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00032-year
-. manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00021-year

The Royal Line

Bring the coffeehouse directly into your business or small office with Saecos super automatic Royal line of espresso machines. With all of the programmable features available, the Royals are some of Saecos most impressive machines. The LCD display and programmable push-button technology make it easy for anyone to become a barista. Whole beans are perfectly ground, tamped, brewed and discarded into a used grounds container. Use the steam wand or the built-in Cappuccinatore to easily froth milk directly into your cup.
The Saeco Advantage: LCD Display: Program up to three drink buttons with the easy-to-read interface. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Cappuccinatore Frothing Attachment: Automatically steam and froth milk directly into your cup. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.

Royal Coffee Bar LCD display 3 beverages
Royal Professional LCD display 3 beverages
Cappuccinatore & Pannarello -
swivel base 82 oz tank or 3/4 plumbed line optional 10 oz 15 pucks stainless steel metal 15.2W x 15.8D x 19.2H 35 lbs. 7-08461-10055-year
swivel base 82 oz tank optional 10 oz 15 pucks stainless steel metal 15.2W x 15.8D x 19.2H 35 lbs. 7-08461-12110-year

Incanto Line

The Incanto line of super automatic espresso machines feature innovative Saeco technologies including three programmable brew settings and ceramic disc grinders. The Saeco Brewing System makes it easier than ever before to customize and brew espresso at home. Thanks to the Rapid Steam technology, you can easily froth milk to quickly turn your espresso into a cappuccino or latte. The elegant finish and compact footprint make the Incanto line a perfect fit for any kitchen.
The Saeco Advantage: Programmable Brew Settings: Program up to three drink buttons with the easy-to-read interface. Ceramic Disc Grinder: With automatic shut-off, the built-in grinder is safe, quiet and long-lasting. Saeco Brewing System: Make an infinite variety of coffees from one machine with just the twist of a dial. Rapid Steam: Rapid Steam technology reduces the normal waiting time between brewing coffee and steam output to just a few seconds.
Incanto Deluxe LCD display 3 beverages
Incanto Classic indicator lights 2 beverages active
6 - 12 gr. capacity ceramic disc

swivel base 68 oz

10 oz 13 pucks stainless steel metal 12W x 15.5D x 15H 26 lbs. 7-08641-30091-year
10 oz 13 pucks stainless steel metal 12W x 15.5D x 15H 26 lbs. 7-08461-30020-year

Spidem Line

Bringing the caf into your own home has never been easier with the Spidem Villa by Saeco. Just add whole beans and water, and instantly you will have a perfectly extracted espresso. With state-of-the-art technology, you can make all of your favorite espresso-based drinks, including cappuccino, latte, and even regular-strength coffee. Every cup of coffee is freshly ground, dosed, tamped, and brewed with consistent high quality in one cycle, all at the push of a button.
The Saeco Advantage: Coffee Dial Control: Dial display easily adjusts the preferred amount of brewed coffee for each cup. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Pannarello Steam Wand: Quickly steam and froth milk for cappuccinos and lattes perfectly. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Spidem Villa (Silver) indicator lights -
Spidem Villa (Black) indicator lights -
swivel base 57 oz optional 12 oz 15 pucks stainless steel ABS plastic 15W x 14D x 15.5H 18 lbs. 7-08461-10003-year

swivel base 57 oz optional 12 oz 15 pucks stainless steel ABS plastic 15W x 14D x 15.5H 18 lbs. 7-08461-10004-year

Traditional Line

The traditional line of espresso machines is perfect for those who love the nitty gritty ritual of making an espresso. Each machine is equipped with a pressurized portafilter and an optional pod adapter for the choice of using ground coffee or pre-packed ESE pods for brewing. The Pannarello steam wand froths milk consistently for the perfect cappuccino or latte every time.
The Saeco Advantage: P ressurized Portafilter: The patented filter holder pressurizes the brewing chamber, ensuring a great extraction of espresso. Pannarello Steam Wand: Used to manually froth milk for cappuccinos and lattes. Also produces hot water for tea. ESE Pod Adapter Capability: A pod adapter and special filter basket enable the portafilter to handle single serve prepackaged shots (pods). Cup Warming Surface: Comfortably holds espresso cups and is heated by the residual heat of the boiler.
Features Pressurized Portafilter Pannarello Steam Wand Plug-In Cappuccinatore Pod Adaptable Filter Holder Cup Warming Surface Hot Water Dispenser Dual Spout Dispensing Head Removable Water Tank Water Tank Capacity Boiler Pump Pressure Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP

Magic Cappuccino Plus

included

optional

passive
68 oz stainless steel 15 bar ABS plastic 9.5W x 11D x 14H 13.5 lbs. 7-08461-00033-year
85 oz stainless steel 15 bar metal 8W x 10D x 11.75H 14 lbs. 7-08461-00035-4 (SS) 7-08461-00034-7 (Blk) 1 year

450-$400

Nina Line
The new Nina series of espresso machines completes the BMW-designed Saeco line with sleek lines, compact construction and a modern color palette. These traditional machines are equipped with a stainless steel boiler, a pressurized portafilter, and an optional pod adapter to choose between ground coffee or pre-packed ESE coffee pods. The Pannarello steam wand or Cappuccinatore froths milk consistently for the perfect cappuccino or latte every time. The Saeco Advantage: P ressurized Portafilter: The patented filter holder pressurizes the brewing chamber, ensuring a great extraction of espresso. Pannarello Steam Wand: Used to manually froth milk for cappuccinos and lattes. Also produces hot water for tea. ESE Pod Adapter Capability: A pod adapter and special filter basket enable the portafilter to handle single serve prepackaged shots (pods). Cup Warming Surface: Comfortably holds espresso cups and is heated by the residual heat of the boiler.

Features Display Pressurized Portafilter Pannarello Steam Wand Plug-In Cappuccinatore Pod Adaptable Filter Holder Cup Warming Surface Hot Water Dispenser Dual Spout Dispensing Head Removable Water Tank Water Tank Capacity Boiler Pump Pressure Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP

Nina Bar touch interface

Nina Cappuccino coffee dial

Nina coffee dial

50 oz stainless steel 15 bar metal 11W x 12D x 14H 9 lbs. 7-08461-00038-year
50 oz stainless steel 15 bar ABS plastic 11W x 12D x 14H 9 lbs. 7-08461-00040-year
50 oz stainless steel 15 bar metal 11W x 12D x 14H 9 lbs. 7-08461-00041-year

Drip Coffeemakers

Saeco, the leading manufacturer of espresso machines, is taking its passion for coffee in new directions. These urns and drip coffee products join the industry leaders highly successful product lines that include automatic and traditional home espresso machines, professional and foodservice equipment, vending machines and coffee accessories. Renaissance Coffee Urn: While bringing the knowledge of proper brewing techniques to larger volume customers and events, the Renaissance Coffee Urn delivers the freshest cups of coffee to home entertaining, catering and restaurant service. Renaissance Portable Coffee Urn: Freshly brewed coffee is made even more accessible with the Renaissance Portable Coffee Urn. Holding 25 cups of coffee, this urn is perfect for family gatherings, parties or meetings. The large, heat resistant handle makes it easy to transport. Renaissance Glass: The Renaissance Glass sets out to change the way coffee lovers think of the drip coffeemaker. Combining European styling with the latest innovations, this machine makes brewing a carafe of hot, flavorful coffee easier than ever.
Renaissance Urn Large 60 Cup Capacity Heat Resistant Handle Built-In Cord Storage Stainless Steel Housing Water Indicator Tube Digital Display Control Panel Detachable Power Cord Two Way Dripless Spout Unit Size: 12.5W x 11D x 20H Unit Weight: 9.5 lbs. UPC Code: 7-08461-00098-9 Warranty: 1 year MSRP Price: $179

Renaissance Portable Urn 25 Cup Capacity Large Heat Resistant Handle Stainless Steel Housing Water Indicator Tube Digital Display Control Panel Detachable Power Cord Newly Designed Dripless Spout Unit Size: 8.75W x 11.5D x 13.5H Warranty: 1 year Unit Weight: 9.5 lbs. MSRP Price: $149 UPC Code: 7-08461-11008-4
Renaissance Glass Top Loading Filter Basket 55 oz. Top Filling Water Tank Pause n Serve Glass Carafe and Hot Plate with Keep Warm Function Built-In Cord Storage Programmable LED Control Panel Automatic Shut-Off Unit Size: 8.25W x 12.25D x 14.5H Warranty: 1 year Unit Weight: 6 lbs. MSRP Price: $149 UPC Code: 7-08461-10011-5