LCD MONITOR

quick start guide

2333HD

Introduction

Package Contents

Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.

Unpacking

Without stand With stand

Monitor Manuals

Monitor

Quick Setup Guide

Warranty Card (Not available in all locations)

User's Guide

Cables

D-Sub Cable

Power Cord

Others

Remote Control BN59-00678A
Batteries (AAA X 2) (Not available in all locations)

Cleaning Cloth

Cable holding ring

Stereo Cable

Note Cleaning Cloth is only provided for highly polished black products as a product feature.

Sold separately

DVI Cable

HDMI Cable

Headphones

USB Cable

TV Antenna Cable (Coaxial Cable)
Component(PR, PB, Y) Cable

Audio cable

Digital audio optic output cable

Your Monitor Front

Activates a highlighted menu item. Push the ' ', button to change the input signal source.
Changing the source is only allowed for external devices connected to the product at the time. To switch Screen modes: [PC] [DVI] [TV] [Component] [HDMI1] [HDMI2] >> Click here to see an animation clip
Use this button to open the on-screen menu and to exit from the on-screen menu or to close the screen adjustment menu. +/Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.
Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels. Power button [ ]
Use this button for turning the product on and off. Remote Control Sensor Aim the remote control towards this spot on the Monitor.
Power indicator This light is lit when operating normally, and blinks once when your adjustments are saved. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods. Speaker You can hear sound by connecting the soundcard of your PC to the monitor.
Note The configuration at the back of the product may vary from product to product.
POWER Connect the power cord for your monitor to the POWER port on the back of the product.
Connect the PC terminal at the back of your monitor to your computer.
HDMI/PC/DVI-D AUDIO IN , DIGITAL AUDIO OUT (OPTICAL) , EX-LINK HDMI/PC/DVI-D AUDIO IN Connect the [ HDMI/PC/DVI-D AUDIO IN ] terminal at the back of your product to your computers sound card. DIGITAL AUDIO OUT(OPTICAL) Connect the [DIGITAL AUDIO OUT(OPTICAL)] terminal of your product to the digital sound output or standard sound output terminal of the DVD home theater (or amplifier) using a digital audio optical output cable. EX-LINK This is a reserved terminal used for servicing.
SERVICE This is a reserved terminal used for servicing.

DVI-D IN / HDMI IN 1

DVI-D IN Connect the DVI cable to the DVI-D IN port on the back of your product. HDMI IN 1 Connect the [HDMI IN 1] terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable. COMPONENT IN
R - AUDIO - L Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ R - AUDIO - L] port of the product. PR, PB,Y Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [ PR, PB,Y ] input ports using a component video cable ( PR, PB,Y ). ANT IN Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the product. Make sure to use a TV antenna cable (sold separately) as the antenna cable.

Kensington Lock

The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. Note The location of the Kensington Lock may be different depending on its model.
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Kensington slot on the Monitor ( locking direction ( 2. 3. ). ) and turn it in the
Connect the Kensington Lock cable. Fix the Kensington Lock to a desk or a heavy stationary object.
HDMI IN 2 / HDMI IN 2 Connect the [HDMI IN 2] terminal at the back of your product to the HDMI terminal of your digital output device using a HDMI cable.
Connect your headphones to the Headphone connection terminal. Cable holding ring Fix the cables using the holding ring, as shown in the figure.

Note See Connecting Cables for further information regarding cable connections.

Remote Control

POWER TV Number Buttons - button + VOL TOOLS Down-Up Left-Right buttons INFO COLOR BUTTONS CC MTS MENU SOURCE PRE-CH CH MUTE RETURN ENTER EXIT SRS FAV.CH P.SIZE 1. 2. POWER TV Turns the product On/Off. Selects the TV mode directly. Press to change the channel. The "-" button operates only for TV. It is used to select MMS (multi-channel) for a TV. Adjusts the audio volume. Use to quickly select frequently used functions. Moves from one menu item to another horizontally, vertically or adjusts selected menu values. Current picture information is displayed on the upper left corner of the screen. Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu. Controls the caption decoder.
3. Number Buttons 4. - button
5. + VOL 6. TOOLS Down-Up Left7. Right buttons 8. INFO

9. COLOR BUTTONS

10. CC

11. MTS

You can select the MTS (Multichannel Television Stereo) mode. Mono, Stereo, SAP (Separate Audio Program) Set 'MTS' to ON to choose Mono, Stereo or SAP.

12. 13.

MENU SOURCE
Opens the on-screen menu and exits from the menu or closes the adjustment menu. Press the button to change the input signal SOURCE. Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time.
14. PRE-CH 15. 16. CH MUTE
This button is used to return to the immediately previous channel. In TV mode, selects TV channels. Pauses (mutes) the audio output temporarily.This is displayed on the lower left corner of the screen.The audio resumes if MUTE or - VOL + is pressed in the Mute mode. Returns to the previous menu. Activates a highlighted menu item. Exits from the menu screen. Not Available. Press to switch to your favorite channels. Press to change the screen size.

17. 18. 19. 20.

RETURN ENTER EXIT SRS

21. FAV.CH 22. P.SIZE

Connections
Connecting Cables Connecting to a Computer
Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the [PC IN] port on the back of your monitor.
[PC IN] Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the [DVI-D IN] Port on the back of your Monitor.

[DVI-D IN] Connect the [HDMI / PC / DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC. Note You may enjoy clear and quality sound from the computer sound card using the monitor speakers. (You don't need to install any separate speakers for your computer.) You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-sub and DVI cables to one computer. If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press 'SOURCE [ ]' button to have the monitor double-check the input signal source.
Connecting to a Macintosh
Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the D-SUB port on the back of your monitor.
[PC IN] Note Turn on the monitor and Macintosh.
Connecting to Other devices
Note This monitor allows the user to connect it to such input devices as a DVD player, a VCR or camcorder, or a DTV or TV without disconnecting the PC. The configuration at the back of the monitor may vary from product to product. The DVI to HDMI cable, digital audio optic output cable, and RCA to stereo (for PC) cable are all sold separately. Contact a Service Center to purchase any products sold separately.

Connecting TV

Note You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer.
Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable. When using an interior antenna terminal: Check the antenna terminal on the wall first and connect the antenna cable. When using an outdoor antenna: If you are using an outdoor antenna, use a professional for installation if possible. To connect the RF cable to the antenna input terminal: Keep the copper wire portion of the RF cable straight.

2. 3. 4.

Turn on the monitor. Select TV using the TV button on the remote control. Select a desired TV channel. Note
Is weak signal causing poor reception? Purchase and install a signal amplifier for better reception.
Connecting DVD / Set Top Box
Note Connect to the DVD / Set Top Box input if the device has a [COMPONENT IN] connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is on.
Connect the port of the DVD, VCR (DVD / Set-Top Box) to the [R-AUDIO-L] port of the monitor. Connect the VIDEO OUT port of the DVD / Set-Top Box to the [PR, PB,Y] input ports using a component video cable (PR, PB,Y). Note Select "Component" using the 'SOURCE [ ]'
If you connect the PR, PB, and Y component cables to the incorrect terminals, the screen will be displayed in red or blue.
For single-family houses, install an UHF antenna to receive digital broadcasting.

Connecting HDMI

Note You can connect digital output devices to your monitor. You can enjoy better screen and sound quality. 1. Connecting Using a HDMI Cable
Input devices such as digital DVD are connected to the [HDMI IN1] or [HDMI IN2] terminal of the monitor using the HDMI cable. When all the connections are completed, connect the power cords for the monitor and DVD(or the device connected to the digital output terminal). Select HDMI using the SOURCE [ 2. ] button.
Connecting Using a DVI to HDMI Cable
Connect the DVI output terminal of a digital output device to the [HDMI IN1] or [HDMI IN2]terminal of the monitor using a DVI to HDMI cable. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [HDMI/PC/ DVI-D AUDIO IN]terminal of the monitor. (3) When all the connections are completed, connect the power cords for the monitor and DVD (or the device connected to the digital output terminal).
(4) Select "HDMI" using the 'SOURCE [ Note

]' button.

If you just connect using the DVI to HDMI cable without connecting to the sound source, you cannot hear sound. Connecting the audio output terminal of a digital device to the [R-AUDIO-L] of [COMPONENT IN] of the monitor using an audio cable will not give you sound. Make sure to connect to the [HDMI / PC/DVI-D AUDIO IN] terminal of the monitor.
Connecting and Using an Amplifier
Note You can connect the digital sound input (optical) or standard sound input terminal of your amplifier to your monitor using the correct cable.

1. 2. 3. 4.

Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the digital sound input terminal of your digital amplifier using an optical cable. Set the Internal Mute On in the Sound menu using the MENU button. Adjust the sound volume using the Volume button of your amplifier If the connections are set up, power up your monitor and amplifier. Note
Because no sound is emitted from the monitor, you need to use an amplifier. For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their manufacturers.

Connecting Headphone

Note You may connect your headphones to the monitor.
Connect your headphones to the Headphone connection terminal.
Using the Stand Tilt angle
You can adjust the tilt angle within a range of 0 forward to 20 backward for the most comfortable viewing angle.

Attaching a Base

This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
Monitor Mounting interface pad (Sold separately)
Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Remove four screws and then remove the stand from the LCD monitor. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor. For wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface. Contact the nearest Samsung Service Center for more information. Samsung Electronics will not be responsible for damages caused by using a base other than those specified. Please use Wall Mount according to the International standards.

Troubleshooting

Self-Test Feature Check
Note Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.
1. 2. 3. Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. Turn on the monitor. The figure shown below ("Check Signal Cable") appears on a black background when the monitor is in its normal working condition though it does not sense any video signal: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen.
Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.

Not Optimum Mode

If the vertical resolution is not optimum mode, you can still see the display but the warning message below appears and disappears after one minute. The user must adjust the frequency within that one minute.
Note Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are supported by the monitor.

Maintenance and Cleaning

1. Maintaining the Monitor Case.
Clean with a soft cloth after disconnecting the power cord. Do not use benzene, thinner or other flammable substances, or a wet cloth. We recommend a Samsung cleansing agent is used to prevent damage to the screen.
2. Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) The user will be required to pay costs and related expenses for repair of damages caused by him/her.
Symptoms and Recommended Actions
Note A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the SOURCE of the problem, and then contact a service center or your dealer. 1. Check if the power cord and the video cables are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, check if you installed the adapter (video) driver and the monitor driver. 4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

Check List

Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.
1. Problems related to Installation
Note Problems related to the monitor installation and their solutions are listed.

PC Mode

Q: A: It appears the PC does not function normally. Check if the Display Adapter Driver (VGA Driver) is properly installed. (Refer to Installing Driver) The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tightened.(Refer to Connecting the monitor)

TV Mode

Q: A: TV screen is blurred or shows noise signals. Check if the TV antenna connector is securely connected to the external antenna.(Refer to Connecting TV)
2. Problems related to Screen
Note Problems related to the monitor screen and their solutions are listed. Q: A: Screen is blank and power indicator is off Ensure that the power cord is firmly connected and the LCD monitor is on.(Refer to the Connecting the monitor) "Check Signal Cable" message Ensure that the signal cable is firmly connected to the PC or video SOURCEs.(Refer to the Connecting the monitor) Ensure that the PC or video SOURCEs are turned on. "Not Optimum Mode" message Check the maximum resolution and the frequency of the video adapter. Compare these values with the data in the Preset Timing Modes Chart. Picture rolls vertically. Check if the signal cable is securely connected.Connect it again securely. (Refer to Connecting the monitor) Image is not clear. Picture is blurred. Run Frequency Coarse and Fine tuning. Turn on again after removing all accessories(video extension cable, etc.) Set resolution and frequency to the recommended ranges. Picture image is unstable and vibrates. Ghost images are shown in the picture.

A: Q: A: A: Q: A:

Q: A: A: A: Q:
Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. The image is too light or too dark Adjust the Brightness and Contrast.(Refer to the Brightness, Contrast) Power Indicator blinks green. The monitor is currently saving the changes made in settings to the OSD memory. Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds The monitor is using its power management system press a key on the keyboard The screen is blank and is blinking. If you see the "TEST GOOD" message on the screen when you press the MENU button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected.

Q: A: Q: A: Q: A: A: Q: A:
3. Problems related to Audio
Note Problems related to audio signals and their solutions are listed below. Q: A: No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.(Refer to the Connecting the monitor) Check the volume level.(Refer to the Volume) The sound level is too low. Check the volume level.(Refer to the Volume) If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.

A: Q: A: A:

4. Problems related to Remote Control
Note Problems related to the remote control and their solutions are listed. Q: A: A: A: A: A: The remote control buttons do not respond. Check the battery polarities (+/-). Check if the batteries have been exhausted. Check if the power is on. Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity
5. You may see small particles if you look closely at the edge of the bezel surrounding the screen.
This is part of the products design and is not a defect.

Q&A

Q: A: A: How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjusts the resolution? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Settings. A: Windows ME/2000: Set the resolution in the Control Panel Display Settings. * Contact the video card manufacturer for details. Q: A: How can I set the Power Saving function? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: A: How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the monitor. Q: A: What are the benefits of digital broadcasting? Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog TV broadcasting does. As services develop, you can also enjoy various information services because various kinds of data besides video and audio can be sent. For example, while watching a sports game, you can view various data on your favorite player or you can view all or selected screens which have been captured from different angles for a specific scene. In addition, you can receive information on a previous story or drama or you can buy home shopping products such as an accessory currently on TV.

Digital TV broadcasting allows you to easily access various information services in your home creating a more information-oriented home. Q: A: A: What is the difference between HDTV and SDTV? There are various types of digital TVs. The most widely known types of digital TV are HDTV and SDTV. They are classified according to the screen quality and the video specifications. A: HDTV (High Definition TV): High screen quality, very clear TV. SDTV (Standard Definition TV): Common standard digital TV.
An SDTV has an aspect ratio of 4:3 which is the same as that of an analog TV. SDTV has an aspect ratio of 16:9 which is similar to a cinema screen. This provides a much better screen quality than SDTV. It's like having a theater in your home. Digital TV broadcasting in our country is ultimately orientated towards HDTV. Can I watch HD broadcasting with all digital TVs? You can receive all digital broadcasts, whether they are SD or HD, using any digital TV. However, you cannot enjoy HD programs, which are the highest quality digital TV programs, using an SD digital TV. Especially, as SD broadcasting has an aspect ratio of 4:3, HD broadcasting has an aspect ratio of 16:9, similar to a cinema screen. Therefore, to enjoy the full benefits of digital TV, it is better to purchase an HD digital TV. (At present, all digital TVs from Samsung Electronics have the 16:9 wide aspect ratio.)

A: Q: A:

Q: A: A:
Can I watch digital TV broadcasting with an analog TV? No. The analog TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital TV broadcasting. Can I use my present antenna to receive digital broadcasting? As for existing analog TV, digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas. If signal reception is very good in your environment, you can watch digital broadcasts with your existing indoor antenna. If not, it is better to install an outdoor UHF antenna. How do I connect an antenna for an apartment or tenement house? Consult the superintendent's office or broadcasting facility administrator for your apartment or tenement house to check whether UHF reception is available. Even if digital TV broadcasting is available in your area, if you cannot watch it because the superintendent's office or common broadcasting facility does not rebroadcast the signal, you have to install an indoor or outdoor antenna. Alternatively, your local cable broadcasting company provides a digital TV service, and you can subscribe to it. If a cable broadcasting company is sharing a common broadcasting facility for your apartment or tenement house, it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility.

LCDMO0807CA01HQ-WW

imagine
imagine a monitor made for entertainment
With their champagne bubble back pattern, soft moonlight glow, and sensuous curvature the Samsung 933HD / 2333HD wide screen monitors sparkle in any scenario. Their pure black or pristine white form, built-in DTV Tuner and invisible speakers invite you to enter a world where entertainment comes alive. To learn more, please visit www.samsung.com
SyncMaster 933HD / 2333HD
Samsung Electronics Co., LTD
Head Office (Suwon Korea) 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyunggi-Do, Korea 443-742 www.samsung.com

Enter a world of wonder

The Samsung 933HD/2333HD wide screen monitors offer unlimited entertainment. Evocative, emotional images are expressed by the dramatic 10.000:1 Dynamic Contrast ratio, allowing you to enjoy a deeper, more personal viewing experience. Their enchanting elegance of form, built-in DTV Tuner and speakers, and enhanced HD connections introduce you to a world of pure sensory pleasure.
* The blue light appears when the product is turned on.

LCD monitor features

933HD / 2333HD

Digital TV on the PC

The Samsung 933HD/2333HD monitors enable you to enjoy a wider world of entertainment. With their built-in digital TV tuner and 16:9 wide screen format they are capable of displaying immaculate HDTV images. So, whether you are using them as a monitor or as a stand alone TV, you can appreciate the versatility of PC or PC free HDTV.

Your HD multimedia hub

HDMI (High Definition Multimedia Interface) connections are the fastest, most intelligent way of connecting HD digital peripherals with your monitor. Single cable transmission of pure, uncompressed digital data enables the highest definition images to be brought to life on-screen. With 2 HDMI inputs, the Samsung 933HD/2333HD monitors are your all access pass to unlimited HD entertainment.
Rich in detail Designed to delight your senses
The sleek, chic contours of the Samsung 933HD/2333HD monitors create a sense of comfort and relaxation that removes all your tension. With their pristine white or pure black bodies and wide screens, they offer an expansive environment in which inspiration and creativity can grow. The crystal bar curves gently, creating balance and inspiration. Its clean, clear quality is accentuated by the soft glow of the moonlight power indicator which soothes and smoothes your senses. In a flat black world, the Samsung 933HD/2333HD monitors are a refreshing break from convention. Their patterned back design expresses an individuality that allows you to express your own.

Slack Black, Pure White

Images are born with rich, natural intensity due to the Samsung 933HD/2333HDs ultra-high 10,000:1 Dynamic Contrast ratio. Automatic backlight adjustment creates deeper, more dramatic dark tones and brighter, more striking light tones, presenting images with vibrant, vivid colors that match those of reality itself.

Conventional Samsung

Transparent decoration bar

Ball Hinge

High-impact sound
Premium sound is delivered by the powerful built-in speakers. Invisible to the eye, yet clear on the ears, the 2 channel 3W hidden speaker system makes your work and living space a cleaner, neater place. TV, DVDs, games, and music are enhanced by the superior sonic presence of the speakers, immersing you in an environment that sounds as good as it looks.

Sparkling Pattern (Back)

Made to measure entertainment
The 16:9 wide screen format provides the ultimate environment for viewing TV, movies, and games. By matching the original entertainment source format, images presented in 16:9 fit the screen exquisitely, creating a more expansive image that draws you into the picture and immerses you in the experience.

16:9 format movie on 16:9 display 16:9 format movie on 16:10 display (with scaling up) 16:9 format movie on 16:10 display

Reliable for life

The eco-friendly off timer is an energy saving function that allows the monitor to be turned off automatically at any specified time. By using this feature, you can ensure that the monitor maintains its optimum performance level for an extended period of time, remaining reliable and dependable for the duration of its life.
Display Screen size Brightness (Typical) Contrast Ratio (Typical) Resolution Response Time (Typical) Viewing Angle(H/V) Color Supported Signal Input Video Signal
18.5"W 300 cd/m2 DC 10,000:1(1000:1)(Typ.) 1366 x 768 5ms 170/160 16.7 M Analog RGB, DVI, HDMI, Component, TV(Digital TV/Analog TV) Sync. Signal Connector Separate H/V, Composite 15pin D-SUB, 2HDMI, Component, DTV Tuner, Optical Out, Scart, Cl Slot

2333HD

23"W 300 cd/m2 DC 10,000:1(1000:1)(Typ.) 1920 x 1080 5ms 160/160 (CR/10) 16.7 M Analog RGB, DVI, HDMI, Component, TV(Digital TV/Analog TV) Separate H/V, Composite 15pin D-SUB, 2HDMI, Component, DTV Tuner, Optical Out, Scart, Cl Slot 48 Watts <2 Watt Built-in DDC 2B No Yes 3W x 2Ch VESA 100mm High Glossy Black Remote Controller, D-Sub Cable, DVI-D Cable Built-in DTV(DVB) Tuner, Component, 2HDMI, CI Slot 557.8 x 415.3 x 218.8 557.8 x 363.3 x x 434 x 141
Power Consumption (typ.) Stand by Power(DPMS) Type
48 Watts <2 Watt Built-in DDC 2B No Yes 3W x 2Ch VESA 75mm High Glossy Black Remote Controller, D-Sub Cable, DVI-D Cable Built-in DTV(DVB) Tuner, Component, 2HDMI, CI Slot

Features

Plug & Play USB powered hub option Mac Compatibility Multimedia Speakers Wall-Mount Cabinet Color Optional Accessories Special Features

Dimension

Set(WxHxD)(mm) (with Stand) Set(WxHxD)(mm) (w/o Stand) Shipment(WxHxD)(mm)
454 x 353.5 x x 307 x 67.x 487 x 135 4.1 5.3 Simple (Ball Hinge) Tilt

Weight

Product Weight(kg) Shipment Weight(kg)

Type Function

Simple (Ball Hinge) Tilt

Dimensions / unit: mm

Design and specifications are subject to change without notice.