Quick Setup Guide

EZ Record Getting Connected DTV Functions Basic Operation
HDD & DVD RECORDER DVD-893M/895M/897M

1 EZ Record

This function allows you Initialise and Finalise a disc automatically. (Refer to page 48 of the Instruction Manual for more information.)
1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the OK or button. 3. Press the buttons to select Recording, then press the OK or button. 4. Press the buttons to select EZ Record, then press the OK or button. 5. Press the buttons to select On, then press the OK or button. Press the EXIT button to exit the menu. 6. Insert a disc. If the disc is new, it is initialised to V mode automatically. (DVD-RW only) 7. Press the REC button. Recordable Discs DVD-RAM/RW/R

2 Getting Connected

Select one of the following three types of connections : The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals. You must use one of the following connections on this unit.
Antenna + HDD & DVD Recorder + TV
You can connect your HDD & DVD Recorder to the television using the SCART cable if the appropriate input is available on the television. You thus: Obtain better quality sound and pictures Simplify the setting up procedure of your HDD & DVD Recorder Connect the RF cable as shown. Connect one end of the SCART cable to the AV1 jack on the rear of the HDD & DVD Recorder. Also use the Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD & DVD Recorder to the Audio & Video jacks on the TV. For the best picture quality, if your TV has Component video jacks, you can use component cables instead of the yellow video connector on the Video/Audio cable. If your TV has a HDMI or DVI jack, you can use the HDMI or HDMI-DVI cable instead of the yellow video connector on the Video/Audio cable. If you have an AV amplier Connect either audio cables from the AUDIO OUT(R/L) jacks on the HDD & DVD Recorder to the AUDIO IN jacks on your AV amplier, or a digital cable from the DIGITAL AUDIO OUT (OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL AUDIO IN jack on your AV amplier. English-1

AV amplifier (receiver)

To RF IN

To RF OUT RF Cable

OR OR OR

HDD & DVD Recorder

To ANT INPUT TV

C Samsung Electronics

Antenna + VCR/Satellite receiver + HDD & DVD Recorder + TV
Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet. Connect the cable from the antenna/cable TV outlet to HDD & DVD Recorder. Connect the AV1 connector on HDD & DVD Recorder to the SCART AV connector on TV using a SCART cable. Also use the Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD & DVD Recorder to the Audio & Video jacks on the TV. For the best picture quality, if your TV has Component video jacks, you can use component cables instead of the yellow video connector on the Video/Audio cable. If your TV has a HDMI or DVI jack, you can use the HDMI or HDMI-DVI cable instead of the yellow video connector on the Video/Audio cable. Connect the AV2 connector to a SCART AV connector on VCR/Satellite receiver. If you have an AV amplier Connect either audio cables from the AUDIO OUT(R/L) jacks on the HDD & DVD Recorder to the AUDIO IN jacks on your AV amplier, or a digital cable from the DIGITAL AUDIO OUT (OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL AUDIO IN jack on your AV amplier. Setup Video Output using on-screen menu. Refer to pages 44~45 of the Instruction Manual for more information. The Antenna connection does not pass audio/video signals. To watch a DVD on your TV, you must connect audio/video or Scart cables.

TV Wall AV amplifier (receiver)
external device (VCR/Satellite receiver)
Connecting HDMI/DVI to a TV
Connecting to a TV with HDMI Jack Using the HDMI cable connect the HDMI OUT terminal on the rear of the HDD & DVD Recorder to the HDMI IN terminal of your TV. Press the input selector on your TV remote control until the HDMI signal from the HDD & DVD Recorder appears on your TV screen. If you use an HDMI cable to connect a Samsung TV to the HDD HDD & DVD Recorder HDMI Cable (Not Included) & DVD RECORDER, you can operate the recorder using the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+. DVI AdapterCable Please check the n logo (If your TV has an n logo, then it (Not Included) supports Anynet+ function.) Refer to pages 39~40 of the Instruction Manual for more information. Connecting to a TV with DVI Jack TV Using the DVI Adapter Cable, connect the HDMI OUT terminal on the rear of the HDD & DVD Recorder to the DVI IN terminal of your TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the HDD & DVD Recorder to the AUDIO (red and white) IN terminals of your TV. Turn on the HDD & DVD Recorder and TV. Press the input selector on your TV remote control until the DVI signal from the HDD & DVD Recorder appears on your TV screen.
If the HDD & DVD Recorder is connected to your TV in HDMI 1080p output mode, you must use High speed(category2) HDMI cable.
Connecting a USB memory, MP3 player, Digital Camera to the USB HOST.
You can transfer JPEG, MP3 and DivX le of the MP3 player, USB memory or digital camera to a HDD & DVD RECORDER using the USB interface. You can also copy JPEG, MP3 and DivX le of the HDD & DVD RECORDER to MP3 player, USB memory or digital camera using the USB interface. (Refer to page 32 of the instruction Manual for more information) 1. Connecting a USB memory or other USB device to USB HOST of the HDD & DVD RECORDER. Disconnecting the USB cable during the data transfer will stop the communication and may damage data stored in the memory. English-2

MP3 Player

Digital Camera

3 DTV Functions

Display Screen
After the television channels have been stored, you will see the following picture(banner) each time you switch channels.

Banner Elements 1. Displays the favorite channel. 2. Displays the teletext. 3. Displays the subtitle. 4. Displays the multi audio.

DTV TF1 001

1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Disc Manager, then press the OK or button. 3. Press the buttons to select Format, then press the OK button. HDD/DVD-RAM/DVD+RW You will be prompted with the conrmation message Current media : *** Do you want to format?. Press the buttons to select Yes, then press the OK button. DVD-RW You will be prompted with the conrmation message Choose the recording format for DVD-RW. Press the buttons to select the desired format type, then press OK button. All data will be deleted. Do you want to continue? is displayed. 4. Press the buttons to select Yes, then press the OK button. The disc is formatted.
The icon is displayed according to the service information of signal. The icon is displayed only with more than one audio type and language. By pressing the button, you can see the detailed information.
Recording the current TV programme you are watching
1. Press the HDD or DVD button. If you select DVD, Press the OPEN/CLOSE button and place a recordable disc on the disc tray. 2. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. ) or Number buttons to select 3. Press the PROG ( the current programme you want to record. 4. Press the REC MODE button repeatedly, (or press the REC MODE button and then press the buttons) to select the recording speed (quality). SPLPEPXP

Record Mode SP (02:12)

The electronic programme guide gives you a channel list for the channels. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Guide, then press the OK or button. Press the GUIDE button while you are viewing a programme. (DTV) RED(A) button (Timer Record) : Setting the Timer Record. ($) button : Go to next day (#) button : Go to previous day It displays programme from now to 7 days after. button : select the programme and station. INFO button (Information) : View the detail information
DVD-SH893M HDD(160GB) XP(High,approx. 33 hours) SP(Standard,approx. 67 hours) LP(Low,approx. 133 hours) EP(Extended,approx. 199 hours/264 hours) FR(Flexible,approx. 33~264 hours) DVD-SH895M HDD(250GB) XP(High,approx. 53 hours) SP(Standard,approx. 106 hours) LP(Low,approx. 211 hours) EP(Extended,approx. 316 hours/421 hours) FR(Flexible,approx. 53~421 hours) DVD-SH897M HDD(320GB) XP(High,approx. 68 hours) SP(Standard,approx. 135 hours) LP(Low,approx. 270 hours) EP(Extended,approx. 405 hours/534 hours) FR(Flexible,approx. 68~534 hours) DVD XP(High,approx. 1 hour) SP(Standard,approx. 2 hours) LP(Low,approx. 4 hours) EP(Extended,approx. 6 hours/8 hours) FR(Flexible,approx. 1~8 hours)

4 Basic Operation

Formatting a Disc
When you insert an unused disc, the following message appears. Since available functions differ depending on the disc type, select a disc that best ts your preferences. DVD-RAM/DVD+R : Formatting will be started automatically. DVD+RW : Use after formatting the disc. DVD-RW : Use after initializing the disc. If you want to change the V or VR mode, refer to "Formatting a Disc" on the Instruction Manual. DVD-R : Formatting disc is unnecessary and only Video Mode Recording is supported. English-3
5. Press the REC button. Information concerning the channel being recorded is displayed on the screen and then recording begins. Icon ( REC) is displayed on the front panel. To stop recording Press the STOP ( ) button to stop or nish a recording in progress.

Finalising a Disc

After you record titles onto a DVD-RW/R disc with your HDD & DVD Recorder, it needs to be nalised before it can be played back on external devices. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Disc Manager, then press the OK or button.

Making a Timer Recording

1. Press the OPEN/CLOSE button, place a recordable disc on the disc tray. 2. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. 3. With the unit in Stop mode, press the TIMER button. 4. Press the button to select the Scheduled List, then press the OK or button. 5. Press the OK button to select Add a list. The Timer Record Input items (Date/ Time etc.) are displayed. Fill in the items using the and number buttons. 6. After selecting the set up value for each mode, press the OK button to select Save.
HDD Scheduled List Current Time 10:54 No. To Source Date Start End Mode PDC Add a list
Recordable Time HDD 69:30 SP Recorded List

< MOVE

sSELECT

rRETURN

Scheduled List Current Time 10:54
3. Press the button to select Finalise, then press the OK button. You will be prompted with the message Do you want to nalise disc?. If you select "Yes", you will be prompted again with the message Disc will be nalised. Do you want to continue?.

DVD-RW(VR)

Disc Manager
Disc Name Used Space Available Space Disc Protection Info Current Rec. Mode 00:17 ( 0.52 GB) 01:54 SP ( 3.85 GB) Not Protected VR-Mode
Rename Protection Delete All Finalise Format
Disc Name Used Space Available Space Disc Protection Info Current Rec. Mode 00:17 ( 0.52 GB) 01:54 SP ( 3.85 GB)
Do you want to finalise disc?

Not Protected

Delete All

VR-Mode

Format
Rename Protection Finalise

Source Date

No.01 No Title To

Source

JAN 01
4. Press the buttons to select Yes, then press the OK button. The disc is nalised. Once a disc is nalised, you cannot delete entries from the record list. After being nalised, the DVDR/DVD-RW(V-mode) operates in the same manner as a DVD-Video. Depending on the disc type, the displayed screen may be different. Finalising time may be different depending on the amount of data recorded on the disc. Data on the disc will be damaged if the recorder is powered off during nalisation process. You can nalise the disc automatically using EZ Record. Refer to page 48 of the Instruction Manual for more information
Recordable Time HDD 69:30 SP

Title sSave

Recorded List
7. Turn the power off to nish the Timer Recording setting. Timer Recording will not work when the power is on.

Anynet+(HDMI CEC)

Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD RECORDER to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.) 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the OK or button. 3. Press the buttons to select System, then press the OK or button.

HDD & DVD RECORDER

HDD Library Guide Channel Timer Record Disc Manager Setup Auto Power Off Power Save : Off : Off

Disc compatibility

Not all brands of discs will be compatible with this unit.

System

Anynet+ (HDMI CEC) Off : On DVB-T Auto Subtitle On : On Touch Key Sound DivX(R) Registration : Off
4. Press the m MOVE sSELECT rRETURN eEXIT buttons to select Anynet+ (HDMI CEC), then press the OK or button. Anynet+ (HDMI CEC) items will be displayed. 5. Press the buttons to select On, then press the OK or button. English-4

AK68-01594B

English _3

Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet. Do not use benzene, thinner, or other solvents for cleaning. Wipe the cabinet with a soft cloth.

HDD (Hard Disk Drive)

The hard disk has a high storage density, which enables long recording durations and quick access to written data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets. To avoid losing important data, observe the following precautions. Do not use the HDD & DVD Recorder in a place subject to extreme changes in temperature. Do not apply a strong shock to the HDD & DVD Recorder. Do not place the HDD & DVD Recorder in a location subject to mechanical vibrations or in an unstable location. Do not place the HDD & DVD Recorder on top of a heat source. Do not disconnect the AC power cord while the power is on. Do not attempt to change the hard disk. This may result in a malfunction. Should the hard disk be damaged, you cannot recover lost data. The hard disk is only a temporary storage space.

Disc Handling

Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this HDD & DVD Recorder may be damaged.

Holding discs

Avoid touching the surface of a disc where recording is performed.

DVD-RAM, DVDRW and DVDR

Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1 where available). Do not use cleaners or cloths for CDs to clean DVD-RAM/RW/R discs.

DVD-Video, Audio-CD

Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
Do not write on the printed side with a ball-point pen or pencil. Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or thinner. Do not apply labels or stickers to discs. (Do not use discs xed with exposed tape adhesive or leftover peeled-off stickers.) Do not use scratch-proof protectors or covers. Do not use discs printed with label printers available on the market. Do not load warped or cracked discs.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment. Do not keep under direct sunlight. Keep in a cool ventilated area. Store vertically.

4_ Line through writing

Keep in a clean protection jacket. If you move your HDD & DVD Recorder suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again.

Among MP3 players in the list above, those that do not use Mass Storage Class are not supported.

English _9

LINE THROUGH WRITING
CONNECTING & SETTING UP
Warning Precaution General Features Before reading the users manual How to use the HDD & DVD Recorder Unpacking Description Tour of the Remote Control Connecting the HDD & DVD Recorder Additional connections Other TYPES of connections with the Video Output Cable Other TYPES of connections with the Audio Output Cable Connecting HDMI/DVI to a TV Connecting to AV IN 3, DV input jack Connecting to USB Devices

SYSTEM SETUP

On-Screen Menu Navigation Plug & PLAY Setup Clock Set Channel Set Setting up the System Options Setting up the Language Options Setting up the Audio Options Setting up the Video Options component output (progressive scan) HDMI Resolution Setting up the Parental Lock Setting up the Recording Options

DTV FUNCTIONS

Basic Functions Guide

10_ Line through writing

PLAYBACK
Region code (DVD-Video only) Logos of Discs that can be played Disc types that can be played Playing a Disc Using the Disc Menu & Title Menu Using the playback related buttons Using the INFO button Selecting the Subtitle Language Selecting the Soundtracks & Audio Channels Changing the Camera Angle Repeat Play Zooming-In Using Markers Using the Bookmarks Playing an Audio CD/MP3 Music/Photo Simultaneous Playback Viewing a Picture Playing a DivX Recordable Discs Recording Formats Recording Mode Unrecordable pictures Recording immediately Copying from a Camcorder Making a One Touch Recording (OTR) Simultaneous Recording and Playback Time Shift function as a live signal Making a Timer Recording Go To Recorded List Basic Editing (Title List) Using the Sort function (Title List) Navigation Menu Select Contents Advanced Editing (Playlist) COPYING FROM HDD TO DVD OR VICEVERSA Copying MP3, JPEG or DivX Changing the name of Music/Photo/DivX le Disc Manager

RECORDING

EDITING

REFERENCE

104 Troubleshooting

APPENDIX

106 Specications 107 Warranty

English _11

GENERAL FEATURES
This unit allows you to record and playback high quality digital video on DVD-RAM/RW/R discs or on the HDD. You can also edit digital images on DVD-RAM/RW discs or HDD. HDD Recording DVD-SH893M You can record up to Approx. 264 hours of video (in EP 8 Hr mode) on the internal 160 GB (gigabyte) hard disk (HDD). DVD-SH895M You can record up to Approx. 421 hours of video (in EP 8 Hr mode) on the internal 250 GB (gigabyte) hard disk (HDD). DVD-SH897M You can record up to Approx. 534 hours of video (in EP 8Hr mode) on the internal 320 GB (gigabyte) hard disk (HDD). With both recordable DVD and a high-capacity HDD in the same recorder, you have the exibility to keep recordings on the HDD for quick access anytime, or record to DVD for archiving or playing on other DVD players. (See pages 69~72) Copy between HDD and DVD You can copy recordings from the HDD to recordable DVD, or from recordable DVD to the HDD. You can only copy in the same record mode as source title. (See page 95) Simultaneous Recording and Playback Playback and recording for both the DVD and the built-in hard disk drive (HDD) are completely independent. For instance, While Recording to the HDD, play another title on the HDD or play a previously recorded programme on DVD. While Recording to a DVD, play a previously recorded programme on HDD. (See pages 76~77) Automated Quality Adjustment for Timer Recording If FR mode is selected, the video quality is adjusted automatically so that all video for the scheduled time can be recorded onto the free disc space. (See pages 79~81) Copying data from a digital camcorder using a DV input jack Record DV Device video onto HDD and DVD-RAM/RW/R discs using the DV input jack (IEEE 1394-4pin/4pin). (See page 75) High quality progressive scan Progressive scanning provides high resolution and icker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality. (See page 44) DivX Certication DivX is a digital video format created by DivX, Inc. This is an ofcial DivX Certied or DivX Ultra Certied device that plays DivX video. HDMI (High Denition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the HDD & DVD Recorder to your TV. This HDD & DVD Recorder supports 576p, 720p and 1080i, 1080p. Anynet+(HDMI CEC) Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD Recorder to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.) (See Page 38) EZ Record Mode This function enables you to initialise and Finalise a disc automatically. (See page 48)

Formatting unnecessary.

Using a DVD-RAM

This type of disc can be formatted in DVD-Video Recording format (VR mode). You can edit recorded images and create a playlist in a specic sequence according to your requirements.

Using a DVD-RW

This type of disc can be formatted in either DVD-Video format (V mode) or DVD-Video Recording format (VR mode). For an unused disc, a message that asks whether to initialise a disc or not. If you select DVD-VR or DVD-V, initialising will be started. You can play a Video mode disc on various DVD components. A VR mode disc allows more varied editing.

Using a DVD-R

Formatting disc is unnecessary and only V Mode Recording is supported. You can play these types of discs on various DVD components only when they have been nalised.

Using a DVD+RW

For an unused DVD+RW disc, a message that asks whether to format a disc or not. If you select DVD+RW, formatting will be started.

Using a DVD+R

This type of disc will be formatted automatically.

Step 3 : Recording

There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classied as follows: Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc.

14_ Line through writing

Step 4 : Playing
You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections, called titles, and sub- sections, called chapters.
Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes. The HDD & DVD Recorder supports many different edit functions, possible only with DVDs and HDD. With a simple and easy edit menu, you can operate various edit functions, such as delete, copy, rename, lock, etc., on a recorded title. Creating a playlist (DVD-RAM/-RW in VR mode, HDD) With this HDD & DVD Recorder, you can create a new playlist on a disc and edit it without the original, preexisting recording. LINE THROUGH WRITING
Step 6 : Finalising & Playing on other DVD components

In Disc Indicator DVD VIEW Indicator HDD VIEW Indicator USB VIEW Indicator TIMER Indicator HDMI Indicator REC Indicator STATUS Indicator
Lights status icon. Lights when DVD mode is selected. Lights when HDD mode is selected. Lights when USB mode is selected. Lights to indicate the timer record mode. Lights to indicate when HDMI is connected and HDMI resolution status. Lights in the record mode. Playing time/clock/current status indicator.

20_ Line through writing

TOUR OF THE REMOTE CONTROL
Your HDD & DVD Recorder remote control will work with Samsung televisions and compatible brands.
Installing batteries in the Remote Control
Lift the cover at the back of the remote control upward as shown.
Install two AAA size batteries. Make sure to match the + and ends of the batteries with the diagram inside the compartment.
Replace the cover. Assuming typical TV usage, the batteries last for about one year.
STANDBY/ON button SOURCE button
Select input signal in external input mode (PROG, AV1, AV2, AV3 or DV input).

OPEN/CLOSE button

To open and close the disc tray.
TV STANDBY/ON button SELECT

(TV, USB, DVD, HDD)

DTV/ANALOGUE button
Select Digital/Analogue broadcasting.

NUMBER buttons

TV/DVD button COPY button REPEAT button
Allows you to repeat a title, chapter, track or disc.

Playback-related Buttons

Forward/Rewind, Search, Skip, Stop, Play/Still.

TV MUTE button

In TV mode, this operates as sound mute.

TV VOL button

TV volume adjustment.

PROG button

Use this to select a TV programme.

MENU button

Brings up the HDD & DVD Recorders setup menu.

AUDIO button

Press this to switch DVD's audio language. When you use DTV, press this button to select the audio.

INFO button

Press to display the programme information box in the screen when you use DTV. Allows access to common functions of the HDD & DVD Recorder. (See pages 58~60.)
RETURN button OK/DIRECTION buttons ( buttons) EXIT button MARKER button
Use this to bookmark a position while playing a disc.

If the HDD & DVD Recorder is connected to your TV in HDMI 1080p output mode, you must use High
speed(category2) HDMI cable.

English _29

Case 2 : Connecting to a TV with DVI Jack
Using a DVI Adapter cable (not supplied), connect the HDMI OUT jack on the rear of the HDD & DVD Recorder to the DVI IN jack of your TV. Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the HDD & DVD Recorder to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD Recorder and TV. Press the input selector on your TV remote control until the DVI signal from the HDD & DVD Recorder appears on your TV screen.
HDMI-DVI cable (not included)
To use an HDMI cable (not supplied), make the Audio/Video connection before plugging in the power cord or after
nishing the Plug & Play Setup. Do not connect the HDMI cable while the Plug & Play Setup is progressing.
Progressive scan automatically activates when HDMI is connected. If TV/HDMI Receiver does not support DTS, Audio output is not available when you play a disc in DTS format. You can switch from the HDMI output to other output only in stop mode. If you use an HDMI cable to connect a Samsung TV to the HDD & DVD Recorder, you can operate the recorder using
the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI CEC).) (See pages 39~40)
Please check the n logo (If your TV has an n logo, then it supports Anynet+ function.)
HDMI (High Denition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Since HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that HDMI supports multi-channel audio. Using HDMI, the HDD & DVD Recorder transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
30_ Connecting & Setting up
HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data). - Though the HDD & DVD Recorder uses a HDMI cable (not supplied), the HDD & DVD Recorder outputs only a pure digital signal to the TV. - If TV does not support HDCP (High -bandwidth Digital Content Protection), snow noise appears on the screen.
Why does Samsung use HDMI?
Analogue TVs require an analogue video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analogue converter (in the HDD & DVD Recorder) or an analogue-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the HDD & DVD Recorder to your TV.

(Channel Type : Analogue)
United Kingdom All All CH 21/474000kHz CH 69/858000kHz
You can select RADIO mode by pressing the TV/RADIO button on the remote control.
This button is used to toggle between the TV and RADIO modes.

36_ System setup

Manual Scanning (Digital)
To tune-in new channels, the HDD & DVD Recorder has been provided with the option Manual Scan where the channel data can be entered by user. To setup, follow steps 1~2 on page 36. 3. Press the buttons to select Manual Scanning (Digital), then press OK or button. 4. Select the Channel Number which you want to nd using buttons. Select Frequency and input the Frequency of the channel you want to nd by pressing the number button. Select Bandwidth which you want to nd using buttons. When the valid frequency is input, the bandwidth is selected automatically. You can select the value of 6,7 or 8 MHz. After select option. Press OK button to start the scanning process.
HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT Channel List (Digital) Favourite List (Digital) Auto Scanning Manual Scanning (Digital) Manual Setup (Analogue)
Manual Scanning (Digital) Country Channel type Scan Mode Channel Number Frequency Bandwidth Signal status 50%

: : : : : :

United Kingdom Digital All CH 5 177500kHz 8MHz

Cancel

Manual Setup (Analogue)
To setup, follow steps 1~2 on page 36. 3. Press the buttons to select Manual Setup (Analogue), then press OK or button. 4. Press the buttons to select a PR(programme) you wish to edit, delete, or swap, then press the COLOUR button. Select Edit, Delete or Swap. Edit- RED(A) button : You can add or edit programme (PR) information. After you have changed the PR information (CH, Name, MFT), select Save, then press the OK button. - CH : Tune the channel using buttons. - Name : Display station name automatically detected in broadcasting signal. If not detected, you can edit name by using buttons. - MFT (Manual Frequency Tunning) : You can tune the channel frequency manually using buttons. Delete GREEN(B) button : The selected programme will be removed. Swap YELLOW(C) button : You can swap the channel information of two programmes (PR). For example, if you wish to swap PR2 and PR5, select swap at PR2, then press the OK button at PR5.

CH ---------------

Name ---------------------C

Delete

Manual Setup (Analogue) PR CH Name MFT 01

m MOVE sSELECT

English _37

Channel List (Digital)

This function is possible in DVB-T mode only. This function is used to edit the favourite channel list or delete the channel. To setup, follow steps 1~2 on page 36. 3. Press the buttons to select Channel List (Digital), then press OK or button. 4. To delete a channel from the Channel List (Digital), press the RED(A) button. Press the OK button to watch that channel.

If you off and on the HDD & DVD Recorder, the option will be returned to default.

Power Save Setting

On: If it is set to On and you turn off the HDD & DVD recorder, the recorder enters the Power Save and the front panel display goes off. Off : Does not set to Power Save. Normally select OFF mode.
HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT Auto Power Off Power Save DVB-T Auto Subtitle Touch Key Sound DivX(R) Registration : Off : Off Off : On : Off
Anynet+ (HDMI CEC) OnOff :

Anynet+ (HDMI CEC)

Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD Recorder to a SAMSUNG TV using an HDMI Cable. (See pages 31~32) (This is only available with SAMSUNG TVs that support Anynet+.) 1. Press the buttons to select Anynet+ (HDMI CEC), then press the OK or button. Anynet+ (HDMI CEC) items will be displayed. HDD & DVD RECORDER 2. Press the buttons to select On, then press the OK or button.
HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT Auto Power Off Power Save : Off : Off
Anynet+ (HDMI CEC) Off : Off DVB-T Auto Subtitle OnOn : Touch Key Sound DivX(R) Registration : Off

English _39

For using Anynet+ (HDMI CEC)
1. Connect the HDD & DVD Recorder to a Samsung TV with an HDMI cable. (See pages 29~30) 2. Set the Anynet+ (HDMI CEC) to On on your HDD & DVD Recorder. (See page 39) 3. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) You can operate the HDD & DVD Recorder by using TV remote control. (TV buttons that can be used to control the HDD & DVD Recorder : , , ~ , REC and colour buttons.)
When you press Anynet+ button on the TVs remote control, the < TV Menu > OSD to the left will appear. - Select Device : Use this option to select device. DVDR View TV - Record : Use this option to start recording or stop Select Device Record recording. Menu on Device - Menu on Device : Same as MENU ( ) button on the Device Operation Receiver : Off HDD & DVD Recorder remote control. Setup - Device Operation : Same as INFO ( ) button on the HDD & DVD Recorder remote control.

> Move eExit

sEnter
By pressing the Power On button of the recorder while watching TV, the TV screen will change to the play screen. If you power on a HDD & DVD Recorder when the TV power is off, the TV will power On. If you turn the TV off, the HDD & DVD Recorder will power off automatically. (When the HDD & DVD Recorder is
recording, it cant be powered off.)
If you change the HDMI to other sources (Composite, Component, RF. etc) in TV while playing the DVD disc, the
HDD & DVD Recorder will stop playing. But the HDD & DVD Recorder may keep the DVD disc Recording.

DVB-T Auto Subtitle

On : The subtitle is shown automatically when watching the DVB-T. Off : The function is cancelled.
HDD Library Guide Channel Auto Power Off Power Save : Off : Off
Anynet+ (HDMI CEC) : Off DVB-T Auto Subtitle Off : On OnOn Touch Key Sound : DivX(R) Registration
It is available when watching a programme that has subtitles.
Timer Record Disc Manager Setup m MOVE
Setting the Touch Key Sound On / Off
To setup, follow steps 1 through 3 above. 4. Press the buttons to select Touch Key Sound, then press the OK or button. 5. Press the buttons to select On or Off, then press the OK or button. 6. Press the MENU button to exit the setup menu.
HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT Auto Power Off Power Save DVB-T Auto Subtitle Touch Key Sound : Off : Off : On : On Off

DivX(R) Registration On

40_ System setup

DivX(R) Registration

Please use the Registration code to register this HDD & DVD Recorder with the DivX(R) Video On Demand format. For more information, visit www.divx.com/vod
HDD Library Auto Power Off : Off
DivX(R)Power On Demand Video Save : Off Guide Anynet+ (HDMI CEC) : Off Channel Your registration code is XXXXXXXX To DVB-T Auto Subtitle : On learn more visit www.divx.com/vod Timer Record Touch Key Sound : On Disc Manager Setup sSELECT rRETURN eEXIT OK DivX(R) Registration
SETTING UP THE LANGUAGE OPTIONS
If you set the language options, in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the OK or button. 3. Press the buttons to select Language, then press the OK or button. Language setup menu will be displayed.
HDD Library Guide Channel Timer Record Disc Manager Setup DVD Audio DVB-T Audio DVD Subtitle DVB-T Subtitle Disc Menu Menu : Original : Franais : Automatic : Franais : English : English

Language

4. Press the buttons to select the desired language option, m MOVE sSELECT rRETURN press the OK or button. DVD Audio : For the disc audio language. DVB-T Audio : For the current broadcasting Programme provides audio. DVD Subtitle : For the disc subtitles. DVB-T Subtitle : For the current broadcasting Programme provides subtitles. Disc Menu : For the disc menu contained on the disc Menu : For the on-screen menu of your HDD & DVD Recorder. - Automatic : Sets the HDD&DVD recorders menu language to the TV menu language. - How to use Automatic? 1. The TV that you want to connect to should support the Anynet+ feature. 2. Use the HDMI cable to connect the HDD&DVD recorder to the TV. (See pages 31~32)

3. If the Anynet+ feature of the HDD & DVD recorder is set to On (see page 41) and the menu language is set to Automatic, then the menu language will be set to the same as that of the TV. 4. If the TV menu language in Automatic mode is not supported by the recorder, the recorders menu language will be set to the default. 5. Press the buttons to select the desired language, then press the OK or button.
If the selected language is not recorded on the disc, the original pre-recorded language is selected. The selected language will only appear if it is supported on the disc and DVB-T. During the playback, press the SUBTITLE button to select DVD subtitle. Because the default of DVD subtitle is off,
press the button to select the desired subtitle.

English _41

SETTING UP THE AUDIO OPTIONS
You can connect the HDD & DVD Recorder to an external amp or Home theatre. Allows you to setup the Audio device and sound status depending on the audio system in use. You can also set NICAM mode. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the OK or button. 3. Press the buttons to select Audio, then press the OK or button. 4. Press the buttons to select the desired audio option, then press the OK or button. 5. Press the buttons to select the desired item, then press the OK or button.

Digital Output

PCM : Select this when your equipment is not Dolby Digital (or MPEG-2) compatible. Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplier has a Dolby Digital (or MPEG-2) Decoder.
HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT Digital Output DTS DRC NICAM : PCM PCM Bitstream : Off : On : On
Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio. LPCM sound track is always
outputted as PCM. It has no relation with Digital Output setting.
Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
Off : Doesnt output DTS signal. Select this when your AV receiver (or AV amplier) does not have DTS decoder. On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplier) have DTS decoder.

HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT Chapter Creator EP Mode Time EZ Record : On : 6 Hours : Off On
V-Mode Compatibility Off : Off
HDD Library Guide Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN Chapter Creator EP Mode Time EZ Record Audio Selection : On : 6 Hours : Off : Off Dual L Dual R
V-Mode Compatibility : On

48_ System setup

DTV functions

BASIC FUNCTIONS

Display Screen
After the television channels have been stored, you will see the following picture(banner) each time you switch channels. DTV FUNCTIONS

Banner Elements

Displays the favourite channel.

DTV TF1 001

Displays the teletext. Displays the subtitle. Displays the multi audio.
The icon is displayed according to the service information of signal. The icon is displayed only with more than one audio type and language. By pressing the button, you can see the detailed information.

Select Audio Track

1. Press the AUDIO button to see the Audio track list. 2. Press the buttons to select desired Audio track, then press the OK button.

Audio Track ENG MPEG

>Change
Setting the Favourite List(Digital)
You can immediately register the present channel to the Digital Favourite Channel List. 1. Press the FAV LIST button while you are viewing a programme. 2. To add the current channel to the Digital Favourite channels, press the YELLOW(C) button. To delete a favourite channel from the Digital Favourite channel list, press the RED(A) button. To watch the Favourite List(Digital) Press the FAV LIST button and then select the channel. Press the OK button to watch that channel.

English _49

Changing the Subtitle Language
When the current broadcasting programme provides subtitle, press the SUBTITLE button. If Subtitle is available on current programme, menu bar is displayed on the upper side. 1. Press the SUBTITLE button. 2. Press the buttons to select a desired subtitle, then press the OK button.

Subtitle OFF

Using the digital text service
When the current broadcasting programme provides teletext, press the TEXT button to see the teletext. 1. Press the TEXT button, the main menu of digital text will be displayed. 2. Press the or number button to select desired digital text, then press the OK button.

Saturday 4 May

Press SELECT for Live Snooker Castaway News Multiscreen Sport Weather BBCi INDEX Election 2007:Get the latest results on page 700

400 199

Press the EXIT button to exit the main menu of digital text.

To exit, press TEXT

The electronic programme guide gives you a channel list for the channels. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Guide, then press the OK or button. Press the GUIDE button while you are viewing a programme. (DTV) RED(A) button (Timer Record) : Setting the Timer Record. ($)button : Go to next day (#)button : Go to previous day It displays programme from now to 7 days after. button : select the programme and station. INFO button (Information) : View the detail information
12:00 TUE 1 JAN 2009 12:00 - 12:25 Blue Peter

TUE 1 JAN

001 BBC ONE 002 BBC TWO 007 BBC THREE 030 CBBC Channel 040 BBC NEWS BBCi A

DTV Guide

Blue Peter ---
--Neighbours The Weakest Link
BBC News Beg. Borrow or Steal

Look North

Strictly Come Dancing: It T
Basli Brush BBC News BBCi

Tracy Beake

Blue Peter BBC News BBCi

Out There ---

Timer Rec

#/$ PREVIOUS/NEXT DAY

INFORMATION
The contents of cell could be displayed slowly according to the broadcasting. If 'Daylight Saving Time' and 'GMT Time' settings are wrong, EPG Time will be incorrect.

50_ DTV functions

Guide Timer Recording
Make sure that clock must be set before operating this function. (see pages 35~36) 1. Press the buttons to select desired programme, then press RED(A) button. 2. Set timer recording option. Target Media: Select the media to record HDD or DVD. Series Recording: With the series recording function, you can easily and automatically record every episode of a series. Select 'On' if you want to use series recording function. The Series Recording option will be dimmed if the selected programme is not one of a series.

DTV FUNCTIONS

12:00 TUE 1 JAN 2009 12:00 - 12:25 Blue Peter Timer TUE 1 JAN Rec

--The Weakest Link

BBC News
You can check the setting in the scheduled List. (see pages 78~79) The title information is displayed in the Title List as for Guide REC. If Timer Rec is set, the icon is displayed in the set programme. Up to 12 recordings are possible including guide recording and

The subtitle display may be different depending on the disc type. Some discs will only allow you to select the language for the disc menu.

56_ Playback

SELECTING THE SOUNDTRACKS & AUDIO CHANNELS

SZXCKLD

Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the AUDIO button on the remote control. 1. Press the INFO button during playback. 2. Press the buttons to select Audio. 3. Press the buttons to select the desired sound tracks or audio channel. PLAYBACK
Soundtracks or Audio channel may be different because they are disc-specic. Some discs allow you to select the audio language for the disc menu only.
CHANGING THE CAMERA ANGLE
When a DVD VIDEO contains multiple angles of a particular scene, you can select the Angle function. 1. Press the INFO button during playback. 2. Press the buttons to select Angle. 3. Press the buttons to select the desired angle.
This function is disc-dependent, and may not work on all DVDs. This function does not work when a DVD has not been recorded with a multi-camera angle system. Displays the current angle, total angle number.

REPEAT PLAY

Playing Repeatedly (Repeat Playback)
You can also operate this function by pressing the REPEAT button on the remote control. 1. Press the INFO button during playback. 2. Press the buttons to select the Repeat. 3. Press the buttons to select Off, A-B or Title or Chapter you want to play repeatedly, then press the OK button.
HDD/DVD-RAM/-RW(VR mode), unnalised DVDR and unnalised DVD-RW (V mode) discs will do not repeat a

chapter.

You can also activate Normal Playback by pressing the EXIT(

English _57

Repeat A-B

SZXCVKL

1. Press the INFO button during playback. 2. Press the buttons to select Repeat. 3. Press the buttons to select Repeat A-B, then press the OK button. 4. Press the OK button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.

Repeat A-B >

>CHANGE
If you set point (B) before ve seconds of playback has lapsed, the prohibition mark ( ) will appear. You can also activate Normal Playback by pressing the EXIT(