Mobile PATA

Spinpoint M5P

Capacity Model 8 MB

HM061GC

HM080GC

HM121HC

HM160HC

FEATURES

Max. 160GB formatted capacity per disk Ultra DMA Mode 5(UDMA100) Compatible TuMR/PMR head with FOD technology Support Automatic Acoustic Management(AAM) Load/Unload Head Technology DRIVE CONFIGURATION 60GB/80GB/120GB/160GB Capacity UDMA 100 Interface 8 MB Buffer DRAM SizeByte per Sector 5,400 RPM Rotational Speed PERFORMANCE SPECIFICATIONS Average Seek time (typical) Average Latency Media Transfer Rate (Max.) Interface Transfer Rate (Max.) Drive Ready Time (typical)3 ATA Security Mode Feature Set ATA S.M.A.R.T. Feature Set SilentSeek NoiseGuard
12 ms 5.6 ms 826Mbits/s 100MB/s 4 sec
RELIABILITY SPECIFICATIONS Non-recoverable Read Error 1 sector in 1014 bits 600,000 Controlled Ramp Load/Unload ACOUSTICS Idle (typical) Performance Seek (typical) POWER REQUIREMENTS Voltage Spin-up Current (Max.) Seek (typical)4 Read/Write (typical) Low Power Idle (typical) Standby (typical) Sleep (typical)
ENVIRONMENTAL SPECIFICATIONS Temperature Operating 5 ~ 55 Non-operating -40 ~ 70 Humidity (non-condensing) Operating 5 ~ 90 % Non-operating 5 ~ 95 % Linear Shock (1/2 sine pulse) Operating(2ms) 325 G Non-operating(1ms) 1000 G Vibration Operating(10~500Hz) 0.7Grms Altitude (relative to sea level) Operating -300 to 3000 m Non-operating -400 to 15000 m PHYSICAL DIMENSION Height (Max.) Width Length Weight (avg.)

2.2 Bel 2.4 Bel

9.5 mm 69.85 mm 100 mm 96 g
* Note : Design and specifications are subject to change without prior notice.
+5V5% 900 mA 2.1 W 2.0 W 0.6 W 0.25 W 0.1 W
1.1MB = 1,000,000 Bytes, 1GB = 1 Performance Seek 2.1 Bel Accessible capacity may vary as some OS uses binary numbering system for reported capacity 2 Upper 128 KB is used for firmware 3 Power-On to Drive Ready 4 30% duty cycle, random seek 5 Power requirements based on enabled DIPM & 1.5Gbps speed
2.5" HDD product specification Rev 1.0 Match with product manual Rev 00

Siewert & Kau Computertechnik GmbH Walter-Gropius-Str. 12a DE 50126 Bergheim Telephone: 02271 - Fax: 02271 - E-Mail: office@siewert-kau.com Internet: http://www.siewert-kau.com
Samsung Spinpoint M5 HM160HC
Hard drive, 160 GB, internal, 2.5", ATA-100, 5400 rpm, buffer: 8 MB
The SpinPoint M5 series utilizes perpendicular magnetic recording (PMR) technology, and the disk drive design has been optimized to allow ultra-precision adjustment of the head parking ramp position for high-density recording.The M5 Series has been developed specifically for portable consumer electronics, where the key to success lies in controlling noise, vibration and power consumption. Samsung's SpinPoint M5 hard drives are fifteen-percent quieter and use five-percent less energy than other models with the same storage capacity. The low-noise, low-power features are attractive to notebook PC or tablet PCs users. General information
Samsung Category Article number Hard Drives 101853 HM160HC

Technical specifications

Product Description Samsung Spinpoint M5 HM160HC - hard drive - 160 GB - ATA-100
Type Form Factor Dimensions (WxDxH) Weight Capacity Interface Type Data Transfer Rate Average Seek Time Spindle Speed Buffer Size Microsoft Certification
Hard drive - internal 2.5" x 1/8H 7 cm x 10 cm x 9.4 mm 96 g 160 GB ATA-MBps 12 ms 5400 rpm 8 MB Compatible with Windows 7
More detailed technical specifications
General Device Type Width Depth Height Weight Hard Drive Form Factor Capacity Interface Type Buffer Size Features Compliant Standards Performance Drive Transfer Rate Internal Data Rate Seek Time Average Latency Spindle Speed Reliability MTBF Non-Recoverable Errors Start / Stop Cycles Expansion / Connectivity Interfaces Compatible Bays 1 x ATA-100 - 44 PIN IDC 1 x internal - 2.5" x 1/8H 330,000 hour(s) 1 per 10^14 600,MBps (external) 103 MBps 12 ms (average) 5.6 ms 5400 rpm 2.5" x 1/8H 160 GB ATA-MB Load/unload technology, NoiseGuard, SilentSeek technology, Perpendicular Recording S.M.A.R.T. Hard drive - internal 7 cm 10 cm 9.4 mm 96 g
Miscellaneous Compatible with Windows 7 "Compatible with Windows 7" software and devices carry Microsofts assurance that these products have passed tests for compatibility and reliability with 32-bit and 64-bit Windows 7.
Environmental Parameters Min Operating Temperature Max Operating Temperature Humidity Range Operating Shock Tolerance 5 C 55 C 5 - 90% 325 g @ 2ms half-sine pulse (operating) / 1000 g @ 1ms half-sine pulse (non-operating)
Siewert & Kau take no accountability nor guarantee that all information contained on these pages is current and complete.