Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/) is correct. Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances
into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic eld generated by the
speaker. If this occurs, place the speaker away from your TV set.
HT-C5500_ELS_ENG_0217.indd 17

9:22:27

Speaker Components

HT-C5500

(L) (R) (L) (R)

SURROUND

CENTRE

SUBWOOFER

SPEAKER CABLE

HT-C5530 (L) (R)

SCREW (Large): 2EA SCREW (Small): 8EA

Assembled Speakers

HT-C5530
CENTRE SPEAKER CENTRE STAND

STAND BASE SUBWOOFER

FRONT SPEAKER

SURROUND SPEAKER

HT-C5550 (L) (R)

SCREW (Large): 4EA

HT-C5550
SCREW (Small): 16EA FRONT STAND CENTRE

CENTRE SPEAKER

(L) (R)
FRONT/SURROUND SPEAKER SUBWOOFER

STAND BASE

SUBWOOFER SPEAKER CABLE
Refer to page 19 to install the Speakers on the Tallboy Stand.

2010-02-18 9:22:27

HT-C5500_ELS_ENG_0217.indd 18

02 Connections

Installing the Speakers on the Tallboy Stand
* HT-C5530 only - Front Speakers * HT-C5550 only - Front/Surround speakers 1. Turn the Stand Base upside-down and connect it to the Stand. 2. Insert four small screws clockwise into the four holes marked using a screwdriver as shown in the illustration. 3. Connect the upper Speaker to the assembled Stand.

Stand Base Stand

Speaker
4. Insert another large screw clockwise into the hole on the rear of the speaker using a screwdriver.

Connecting The Speakers

1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal () and the red wire into the red terminal (+), and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.

Black Red

In case of HT-C5500
Centre Speaker Front Speaker (R) Front Speaker (L)

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.

2010-02-18 9:22:54

HT-C5500_ELS_ENG_0217.indd 24
Connecting Audio from External Components
WIRELESS LAN AUX VIDEO OUT
Red Optical Cable (not supplied)
White Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right.

Set-Top Box OPTICAL

VCR AUX
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. 2. Press the FUNCTION button to select D.IN input. The mode switches as follows : BD/DVD D. IN AUX HDMI 1 HDMI 2 FM
To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV. This system supports Digital sampling frequencies of 32 kHz of higher from external digital components. This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR. 1. Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component. Be sure to match connector colours. 2. Press the FUNCTION button to select AUX input. The mode switches as follows : BD/DVD D. IN AUX HDMI 1 HDMI 2 FM
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of

the VCR to this product.

HT-C5500_ELS_ENG_0217.indd 25

9:22:55

Connecting to the Network
This product enables you to view network based services (See pages 57~62) such as Internet@TV and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN terminal of your modem. 2. Set the network options. (See page 38)

may not be available. different than the aspect ratio of your TV screen, then the picture might appear to be distorted. If you select the 4:3 Pan-Scan or 4:3 Letter Box, you can't see full screen by pressing the FULL SCREEN button on the remote control.

2010-02-18 9:23:09

HT-C5500_ELS_ENG_0217.indd 30
Resolution according to the output mode

Blu-ray Disc playback

Output HDMI Mode Auto 1080p, Movie Frame(24Fs) off 1080p/1080i, Movie Frame(24Fs) on 1080i, Movie Frame(24Fs) off 720p 576p(480p) 576i(480i) Optimal Resolution 1080p@60F 1080p@24F 1080i 720p 576p(480p) HDMI / connected Component/VIDEO Mode 576i(480i) 576i(480i) 576i(480i) 576i(480i) 576i(480i) 576i(480i) HDMI / not connected Component Mode 1080i 720p 576p(480p) 576i(480i) VIDEO Mode 576i(480i) 576i(480i) 576i(480i) 576i(480i)

DVD playback

Setup Auto 1080p 1080i 720p 576p(480p) 576i(480i) Output HDMI Mode Optimal Resolution 1080p@60F 1080i 720p 576p(480p) HDMI / connected Component/VIDEO Mode 576i(480i) 576i(480i) 576i(480i) 576i(480i) 576i(480i) HDMI / not connected Component Mode 576p(480p) 576p(480p) 576p(480p) 576i(480i) VIDEO Mode 576i(480i) 576i(480i) 576i(480i) 576i(480i)
If the connected TV does not support Movie
Frame or the selected resolution, the message If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection? will be displayed. If you select Yes and the resolution is not supported, the TV's screen will be blank. Please wait for 15 seconds and the resolution will be reverted to the previous value automatically. If the screen is blank, press and hold the STOP () button on the front of the product for more than 5 seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.
When the factory default settings are restored,
all the user data stored in the BD data will be deleted. The Blu-ray Disc must have the 24 frame feature in order to use the Movie Frame (24Fs) mode. If both HDMI and Component jacks are connected and you are currently viewing component output, there is a difference between resolution table and actual resolution depending on your TV. If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or Movie Frame (24Fs).

This function is not available if the HDMI cable

does not support CEC.

If your Samsung TV has an n logo, then
it supports the Anynet+ function.
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user manual of your TV.

System

By using the Initial Settings, you can set language, TV aspect, Musical Auto Calibration and Network setting, etc. For more information on the settings, refer to the corresponding section in this user manual.

BD Data Management

Enables you to manage the downloaded contents from the Blu-ray disc that supports the BD-LIVE service. You can check the device information including the storage size, and delete the BD data or change the device. * You must have a minimum 1GB USB Memory device inserted in one of the USB slots (The Wireless LAN Jack also functions as a USB slot.) in order to download content from BD-LIVE.
Display Audio System Network Language Security General Support On-Screen Menu BD Data Management : Disc Current Device Menu External Flash: Memory :
Total Size Audio Delete BD Data Change Device : 955MB

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size. Size 1 : Display smaller application icons, you may see some black on sides of screen. Size 2 : Display normal application icons, image may be too large for your TV screen. Size 3 : Display larger application icons, image may be too large for your TV screen.
Subtitle : 949MB Available Size
| : External Flash Memory s Select r Return

2010-02-18 9:23:21

HT-C5500_ELS_ENG_0217.indd 36
Description of Device(Storage) Information on the Product Total Size : Total size of the Device (Storage). Available Size : Available size of the Device (Storage).

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content.
Display Audio System Network Language Security General Support Initial Setting Disc Menu : DivX(R) Video On Demand: Audio Your registration code is : XXXXXXXXXX Subtitle :

a PBC (WPS) > Move \

" Select ' Return

2010-02-18 9:23:26

HT-C5500_ELS_ENG_0217.indd 40
When done with each eld, use the button to move successively to the next eld. You can also use the other arrow buttons to move up, down, and back. Enter the IP Address, Subnet Mask, and Gateway values. Press the to go to DNS. Press the button to go to the rst DNS entry eld. Enter the numbers as above. When done, press the button to return to Access Point Selection. Select the network, and then press the ENTER button.
BD-LIVE Internet Connection
Set whether to allow internet connection when BD-LIVE service is used. Allow (All) : The Internet connection will be allowed for all BD-LIVE contents. Allow (Valid Only) : The Internet connection will be allowed only for BD-LIVE contents containing a valid certicate. Prohibit : No Internet connection will be allowed for any BD-LIVE content.
10. Go to Step 6 in the Automatic Wireless procedure above, and follow the directions from that point on.
What is a valid certicate?
When the product uses BD-LIVE to send the disc data and request to the server to certify the disc, the server uses the transferred data to check if the disc is valid and sends the certicate back to the product.

Network Test

Use this menu to connect the wired network or check whether your network connection is working or not.
Display On-Screen Menu : Network Test Disc Menu : Audio Address (00:00:00:00:00:00) MAC Audio : System Address,Subnet Mask,Gateway,DNS Server IP Network Subtitle : Gateway Ping Language Internet Service Test Security Network testing. General Support
The Internet connection may be restricted
while you are using BD-LIVE contents.

Language

You can select the language you prefer for home menu, disc menu, etc. On-Screen Menu : Select the language for the on-screen displays. Disc Menu : Select the language for the disc menu displays. Audio : Select the language for disc audio. Subtitle : Select the language for disc subtitles.

Network Status

Check whether a connection to the network and the Internet have been established.
The selected language will only appear if it is

supported on the disc.

HT-C5500_ELS_ENG_0217.indd 41

9:23:28

Security
When you operate this menu for the rst time, password setup screen will be displayed. Enter the desired 4-digit password using the number buttons. (Default password is set to 0000.)

Display Software Upgrade Software Upgrade : Disc Menu Audio : System Current Version Audio : XXX-XXXXXXXXX Subtitle : Network Internet By | Language Upgrade Notication : On Auto Security General s Select r Return Support
You can update software in any of the two ways as follows: Software update is the same as in the By Internet menu. USB : Visit www.samsung.com/bluraysupport, then download and store the latest software (RUF le) into the USB ash drive. Connect the USB ash drive to the USB port of the product (disc tray must be empty) to update the software, then follow the on-screen instructions. CD : Visit www.samsung.com/bluraysupport, download and write the latest software (RUF le) onto a disc. Insert and play the disc in the product to start the update, then follow the onscreen instructions.
Software upgrades using the USB Host jack
must be performed with no disc inside.
If you want to cancel the upgrade in the
process of downloading the upgrade data, press the ENTER button.
When the system upgrade is done, check the
1. To select By Internet, press the ENTER button. A popup message will appear if an update is available. 2. If you select Yes, the product will turn off automatically before restarting. (Never turn it on manually.) 3. The update progress popup will appear. When the update is completed, the product will turn back off automatically. 4. Press the POWER button to turn on the product. software details in the software Upgrade menu.
Do not turn off the product during the System
Upgrade, as it may cause the product to not work properly.
Do not use USB devices other than USB Flash
Drives to do software upgrades when using the USB Host jack.

Contact Samsung

Provide contact information for assistance with your product.
The Update will be completed when the
product turns off after restarting. Press the POWER button to turn on the updated product for your use. Never turn off or on the product manually during the update process. Samsung Electronics shall take no legal responsibility for product malfunction caused an unstable internet connection or consumer negligence during software upgrade.

1. During playback, press the DISC MENU or TITLE MENU button. 2. Press the buttons to select an entry you want to play from Title List, then press the ENTER button.
To return to normal speed playback, press the PLAY () button.

Using the Popup Menu

No sound is heard during search mode.
1. During playback, press the POPUP button on the remote control. 2. Press the buttons or ENTER button to select the desired menu.

Skipping Chapters

During playback, press the SKIP (#$) button. If you press the SKIP ($) button, it moves to the next chapter. If you press the SKIP (#) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.
HT-C5500_ELS_ENG_0217.indd 45

9:23:33

Slow Motion Play/Step Motion Play

Repeat Off

Slow Motion Play
In pause mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 To return to normal speed playback, press the PLAY ( ) button.
3. To return to normal play, press the REPEAT button again. 4. Press the buttons to select Off, the press the ENTER button.
Depending on the disc, the Repeat function

may not be available.

Repeat the Section
No sound is heard during slow mode. Slow motion operates only in the forward

direction.

1. During playback, press the REPEAT button on the remote control. 2. Press the buttons to select REPEAT A-B.

Repeat REPEAT A-B : Off

Step Motion Play
In pause mode, press the PAUSE ( ) button. Each time the PAUSE ( ) button is pressed, a new frame will be appear. To return to normal speed playback, press the PLAY ( ) button.

s Mark A

No sound is heard during step mode. Step motion operates only in the forward
3. Press the ENTER button at the point where you want repeat play to start (A). 4. Press the ENTER button at the point where you want repeat play to stop (B). 5. To return to normal play, press the REPEAT button again. 6. Press the ENTER button.

Repeat Playback

Repeat the Title or Chapter
Repeat the disc title or chapter.
1. During playback, press the REPEAT button on the remote control. 2. Press the buttons to select Chapter or Title, then press the ENTER button.
If you set point (B) before 5 seconds has
lapsed, the prohibition message will appear.

2010-02-18 9:23:35

HT-C5500_ELS_ENG_0217.indd 46

Using the TOOLS button

During playback, you can operate disc menu by pressing the TOOLS button. TOOLS Menu Screen
Title : 1/1 Chapter 4/21 Playing Time : 00:12:06 Repeat Audio : 1/7 ENG Multi CH Subtitle : 1/6 ENG Angle : 1/1 BONUSVIEW Video : Off BONUSVIEW Audio : 0/1 Off Picture Setting < Change " Select
Information about the primary / secondary
mode will be also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the button to switch between primary and secondary audio modes. This function depends on what audio languages are encoded on the disc and may not be available. A Blu-ray Disc can contain up to 32 audio languages and a DVD up to 8. Some Blu-ray Discs may allow you to select either the multi-channel LPCM or Dolby digital audio soundtrack in English.
Selecting the Subtitle Language
NOTE Depending on the disc, the TOOLS menu

may differ.

1. During playback, press the TOOLS button. 2. Press the buttons to select Subtitle. 3. Press the buttons to select the desired subtitle language.
Moving to a Desired Scene Directly

hzZy NOTE

1. During playback, press the TOOLS button. 2. Press the buttons to select Title, Chapter or Playing Time. 3. Enter the desired Title, Chapter or Playing Time using the number buttons, then press the ENTER button.
Depending on the Blu-ray Disc / DVD, you may
be able to change the desired subtitle in the Disc Menu. Press the DISC MENU button. This function depends on what subtitles are encoded on the disc and may not be available on all Blu-ray Discs/DVDs. A Blu-ray Disc can contain up to 255 subtitle languages and a DVD up to 32. Information about the primary / secondary mode will also be displayed if the Blu-ray Disc has a BONUSVIEW section. This function changes both the primary and secondary subtitles at the same time. The total number of subtitles is the sum of the primary and secondary ones.

Selecting the Audio Language
1. During playback, press the TOOLS button. 2. Press the buttons to select Audio. 3. Press the buttons to select the desired audio language.
The indicator will not be displayed on the
screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings.
HT-C5500_ELS_ENG_0217.indd 47

9:23:39

Caption Function
You must have some experience with video extraction and editing in order to use this feature properly. To use the caption function, save the caption le (*.smi) in the same le name as that of the DivX media f le (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the le name.
User : The user can adjust the sharpness and noise reduction function respectively.

Setting the BONUSVIEW

The BONUSVIEW feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing. This function is only available if the disc has the bonusview feature.
Changing the Camera Angle
When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function. 1. During playback, press the TOOLS button. 2. Press the buttons to select Angle. 3. Press the buttons to select the desired Angle. 1. During playback, press the TOOLS button. 2. Press the buttons to select BONUSVIEW Video or BONUSVIEW Audio. 3. Press the buttons to select the desired bonusview.
Primary a audio/video Secondary a audio/video
Selecting the Picture Setting
This function enables you to adjust video quality when you are connected to a TV via HDMI. 1. During playback, press the TOOLS button. 2. Press the buttons to select Picture Setting, then press the ENTER button. 3. Press the buttons to select the desired Picture Setting, then press the ENTER button. Dynamic : Choose this setting to increase Sharpness. Normal : Choose this setting for most viewing applications. Movie : This is the best setting for watching movies.
If you switch from BONUSVIEW Video,
BONUSVIEW Audio will change automatically in accordance with BONUSVIEW Video.
BONUSVIEW Video BONUSVIEW Audio : Picture Setting < Change " Select Off 0/1 Off

2010-02-18 9:23:43

HT-C5500_ELS_ENG_0217.indd 48

Listening to Music

ENTER button : Plays and pauses the selected track. buttons : Fast Play. (except for Audio CD (CD-DA)) STOP button : Stops a track. SKIP($) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. SKIP (#)button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. If you press this button after three seconds of playback in the Playlist, the current track will be replayed from the beginning. But, if you press this button within three seconds after playback starts in the Playlist, the previous track will be played. NUMBER button : During the Playlist playback, press the desired track number. The selected track will be played.

00:05:57

00:04:07

TRACK 004

00:03:41

00:03:17

00:03:35

TRACK 007

00:03:47

TRACK 008

00:03:49

TRACK 009

00:03:53

TRACK 010

00:03:45

c Select

Jump page

2010-02-18 9:23:45

HT-C5500_ELS_ENG_0217.indd 50
4. If there is an undesired track in the playlist, press the YELLOW(C) button again. The selected track will be deleted. 5. Press the ENTER button to play the selected tracks. The selected track will automatically play.
TRACK 001 TRACK 002 TRACK 003 1/1

05:57 04:27 04:07

Sound Mode
DSP(Digital Signal Processor) Function
This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition.
Press the DSP button. SMART SOUND MP3 ENHANCER POWER BASS DSP MODE OFF SMART SOUND : This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. MP3 ENHANCER : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit). POWER BASS : This function stresses low tones providing thudding sound effects.
6. To go to the Music List, press the STOP () or RETURN button. 7. To go to the Playlist, press the ENTER button.
You can create a playlist with up to 99 tracks

on Audio CD (CD-DA).

SFE(Sound Field Effect) MODE
You can set the SFE mode best suited for the type of music you are listening to. Press the SFE MODE button.
Provides a clear vocal as if listening in a concert hall. Provides also a clear vocal as if listening in a concert hall but, less powerful than HALL1. Recommended setting for Jazz. Gives the feel of being in a grand church. Recommended setting for Rock. Select this for normal listening.

JAZZ CHURCH ROCK SFE OFF

HT-C5500_ELS_ENG_0217.indd 51

9:23:49

Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode. Press the PL II button. When listening to music, you can experience sound effects as if you are listening to the actual performance. Adds realism to the movie soundtrack. You will experience a realistic multi-channel effect, as if using six speakers, while using just the front left and right speakers. You will hear multi channel surround sound. Select this to listen to sound from the front left and right speakers and the subwoofer only. Stop Slide Show : Select this if you want to stop the slide show. Slide Show Speed : Select this if you want to adjust the Slide Show speed. Background Music : Select this if you want to listen to music while viewing a picture. Zoom : Select this if you want to enlarge the current picture. (Enlarged up to 4 times) Rotate : Select this if you to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Information : Shows the picture information including the name and size, etc.

During the slide show playback, you can use various function by pressing the TOOLS button.
Stop Slide Show Slide Show Speed : Background Music Zoom Rotate Information Normal
MUSIC MOVIE PROLOG MATRIX STEREO

> Move

When selecting Dolby Pro Logic II mode,
connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound. This mode is available only with 2 channel audio.

Playing back a Picture

Playing a JPEG Disc
1. Insert a JPEG disc into the disc tray. 2. Press the buttons to select the Photos, and then press the ENTER button. 3. Press the buttons to select the folder you want to play, and then press the ENTER button. 4. Press the buttons to select the photo you want to play, and then press the ENTER button.
To enable the Background Music function,
both music and MP3 les must be contained in the same folder. However, the sound quality can be affected by the bit rate of the MP3 le, the size of the photo and the encoding method.
You can't enlarge the subtitle and PG graphic

in the full screen mode.

2010-02-18 6:28:22
HT-C5500_ELS_ENG_0217.indd 52
Playing back a USB Storage
You can use the USB connection to play multimedia les (MP3, JPEG, DivX, etc) downloaded from the USB storage device. 1. Move to the home menu. 2. In Stop mode, connect the USB storage device to the USB port on the front panel of the product. The message Do you want to access the device? will be displayed. 3. Press the button to select Yes, then press the ENTER button. 4. Press the RED(A) button.
You must remove the USB storage device
safely (by performing the Safe to Remove Hardware function) in order to prevent a possible damage to the USB memory. Press the MENU button to move to the main screen, and select the YELLOW(C) button and press the ENTER button.
When the Audio-CD (CD-DA), MP3 and JPEG
les are in stop mode, you can't see full screen by pressing the FULL SCREEN button on the remote control.
If you insert the disc when playing USB storage
device, the device mode is changed to DVD or CD automatically.
To listen to your music les with 5.1 channel
sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 52)

Listening to Radio

CD USB
USB a Change Device c Safely Remove USB d View Devices " Enter

be added or deleted.

Samsung AppS
Various applications are available from here, organized into different categories. Some applications have a download fee.
What's New! Video Sports Lifestyle Games Infomation Other
Featured Most downloaded Most recent

YouTube

TV store Test User002

My Applications Help

a Login b Thumbnail View d Sort By
My Application Displays the application list. Help If you questions about Internet@TV, check this section rst. If none of the tips apply, please visit the help website.
HT-C5500_ELS_ENG_0217.indd 60

BD-LIVE

Once the product is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. 1. Check the size of the remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. 2. Insert a Blu-ray disc that supports BD-LIVE. 3. Select an item from various BD-LIVE service contents provided by the disc manufacturer.
Using the AllShare Function
AllShare enables you to play music, video and photo les in your PC using the product. To use AllShare, you must connect the product to your PC via the network (See pages 26~27) and install the SAMSUNG PC Share Manager on the PC. 1. Visit the Samsung website at www.samsung. com. 2. Download the SAMSUNG PC Share Manager and install it on the PC. 3. When the installation is completed, you will see the SAMSUNG PC Share Manager icon on your desktop. Double-click the icon to launch the application. 4. Select a folder to share from the My computer pane, and click the Share Folder Enabled icon ( ). (To remove a shared folder : Select a folder to remove from the shared folders, and click the Share Folder Disabled icon ( ).) 5. To apply the updated sharing state to the server, click the Set Change State icon ( ).
The way you use BD-LIVE and the provided
contents may differ, depending on the disc manufacturer.
Software Upgrade Notication
In network connection, the product will notice you of any new software version with a popup message. 1. Turn on the product. 2. From the Software Upgrade menu, set Auto Upgrade Notication to On. (See page 43) If there is a new software version available, the product will notice you with a popup message. 3. To upgrade the rmware, select Yes. It will turn off automatically before restarting. (Never turn it on manually.) 4. The update progress popup will appear. When the update is completed, it will turn back off automatically. 5. Press the POWER button to turn on the product.
6. To enable the product to locate a PC server, click Share from the menu bar. Click Set Device Policy and click Accept.

LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
Samsung HT-C5530 (HT-C5530)
HT-C5530, 5.1 channel, Blu-ray/DVD/CD Home Theatre, 1000 W, Dolby Digital, Dolby Pro Logic II, Dolby Digital Plus, Dolby True HD, DTS, DTS-HD, Black

Price details:

Price excl. VAT: 461.41 Eco fees: 0.32 VAT 21 %: 96.96
PDF generated on: 9 June, 2011

Product details:

Product code: HT-C5530 EAN: 8808993676477 Manufacturer: Samsung

558.69

* VAT included
Product is discontinued. You can not order it anymore.
The Samsung HT-C5530 5.1 channel, Blu-ray / DVD / CD Home Theatre with 1000 watts power output opens up a new dimensions in surround sound. It features enhanced content sharing and connectivity with BD Live and InternetTV; an easy way to access online content without having to turn on your PC, and DLNA allows you to wirelessly connect with compatible portable devices. The iPod / iPhone docking cradle increases your audio / video playback and connectivity options, and with USB Host Play various multimedia files can be played without the need for a PC. Main specifications:
RMS rated power: Audio channels: Audio formats supported: Audio system: 1000 W 5.1 MP3,WMA,AAC Dolby Digital, Dolby Pro Logic II, Dolby Digital Plus, Dolby True HD, DTS, DTS-HD 170 W 140 - 20000 Hz &#937; 165 W - 20000 Hz 3 &#937; dB 87 dB 40 - 160 Hz 3 &#937; 170 W 88 dB JPG Divx, MP3, WMA, WMV N Y

Loudspeakers

Centre speaker power: Satellite speaker frequency range: Satellite speaker: Satellite speaker impedance: Satellites RMS power: Centre speaker: Centre speaker frequency range: Centre speaker impedance: Speakers: Satellite speaker sensitivity: Centre speaker sensitivity:

Subwoofer

Subwoofer frequency range: Subwoofer impedance: Subwoofer RMS power: Subwoofer sensitivity:
Image formats supported: Video compression formats:
RDS tuner included: FM radio:

Display

Display:
N Blu-Ray Blu-ray Video, DVD/DVDR/DVDRW, CD DA/CD-R/CD-RW 1 pcs 3500 g 430 x 326 x 63 mm 360 x 74.5 x 68.5 mm 550 g 168 x 350 x 295 mm 3780 g 90 x 141.5 x 68.5 mm 570 g 90 x 119 x 1300 mm 3270 g 68.5 mm 74.5 mm 360 mm 326 mm 63 mm 295 mm 350 mm 168 mm 68.5 mm 141.5 mm 90 mm 430 mm 119 mm 1300 mm 90 mm 2 Y Y HDMI-CECiPod Y 906 x 416 x 357 mm 15000 g 416 mm 357 mm 906 mm 1000 W N N Y Black

Optical drive

Optical disc player type: Disk types supported: Number of disks:

Weight & dimensions

Weight: Dimensions W x D x H: Centre speaker dimensions (WxHxD): Centre speaker weight: Subwoofer dimensions (WxHxD): Subwoofer weight: Surround speaker dimensions (WxHxD): Surround speaker weight: Dimensions front speaker (W x D x H): Front speaker weight: Center speaker depth: Center speaker height: Center speaker width: Depth: Height: Subwoofer depth: Subwoofer height: Subwoofer width: Surround speaker depth: Surround speaker height: Surround speaker width: Width: Front speaker depth: Front speaker height: Front speaker width:

Connectivity

HDMI ports quantity: FM antenna: Audio (L,R) in: Component video (YPbPr/YCbCr) out: Composite video out: USB 2.0 ports quantity: Digital audio optical in: I/O ports:

Management features

Handheld remote control:

Packaging data

Package dimensions (W x D x H): Package weight: Packaging depth: Packaging height: Packaging width:

Energy management

Power consumption:

Networking

Wireless LAN (WLAN) connection: Bluetooth:

Technical details

HDMI: Colour of product:
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.