Some commercial discs and DVD discs purchased
outside your region may not be playable with this product. When these discs are played, either Cannot read this disc. Please check the regional code of the disc. will be displayed. If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.

2010-02-18 9:22:20

HT-C5500_ELS_ENG_0217.indd 8

Region code

Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.
Disc Type Region Code Area North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. India, China, Russia, Central and South Asia. The U.S., U.S. territories and Canada Europe, Japan, the Middle East, Egypt, South Africa, Greenland Taiwan, Korea, the Philippines, Indonesia, Hong Kong Mexico, South America, Central America, Australia, New Zealand, Pacic Islands, Caribbean Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia China

Disc Types

BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Denition format, for playback on the product. This product can play back pre-recorded commercial BD-ROM discs.

BD-RE/BD-R

Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video.

Blu-ray

DVD-VIDEO
A digital versatile disc (DVD) can contain up to 135minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to enjoy vivid and clear quality images. When switching from the rst layer to the second layer of a dual-layered DVD Video disc, there may be momentary distortion in the image and sound. This is not a malfunction of the product. Once a DVD-RW/-R recorded in Video Mode is nalised, it becomes DVD-Video. Pre-recorded (pre-stamped) commercial DVDs with movies are also referred to as DVD-Videos. This product can play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.

DVD-R/-RW

Once a DVD-R/-RW recorded in Video Mode is nalised, it becomes DVD-Video. Ability to play back may depend on recording conditions. This product can play back DVD-R disc recorded and nalised with a Samsung DVD video recorder. Playback can be perfomed with DVD-RW discs in the Video Mode and nalised only.

Place these speakers in front of your listening position, facing inwards (about 45) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speakers. It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV. Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 60 to 90cm above your ear, facing slightly downward. and surround speakers are * Unlike the frontsoundcentre speakers, thewill not come from them used totime. handle mainly effects and sound all the

Centre Speaker f

Surround Speakershj

Subwoofer g

The position of the subwoofer is not so critical. Place it anywhere you like.
Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/) is correct. Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances
into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic eld generated by the
speaker. If this occurs, place the speaker away from your TV set.
HT-C5500_ELS_ENG_0217.indd 17

9:22:27

Speaker Components

HT-C5500

(L) (R) (L) (R)

SURROUND

CENTRE

SUBWOOFER

SPEAKER CABLE

HT-C5530 (L) (R)

SCREW (Large): 2EA SCREW (Small): 8EA

Assembled Speakers

HT-C5530
CENTRE SPEAKER CENTRE STAND

STAND BASE SUBWOOFER

FRONT SPEAKER

SURROUND SPEAKER

HT-C5550 (L) (R)

SCREW (Large): 4EA

HT-C5550
SCREW (Small): 16EA FRONT STAND CENTRE

CENTRE SPEAKER

(L) (R)
FRONT/SURROUND SPEAKER SUBWOOFER

STAND BASE

SUBWOOFER SPEAKER CABLE
Refer to page 19 to install the Speakers on the Tallboy Stand.

2010-02-18 9:22:27

HT-C5500_ELS_ENG_0217.indd 18

02 Connections

Installing the Speakers on the Tallboy Stand
* HT-C5530 only - Front Speakers * HT-C5550 only - Front/Surround speakers 1. Turn the Stand Base upside-down and connect it to the Stand. 2. Insert four small screws clockwise into the four holes marked using a screwdriver as shown in the illustration. 3. Connect the upper Speaker to the assembled Stand.

Stand Base Stand

Speaker
4. Insert another large screw clockwise into the hole on the rear of the speaker using a screwdriver.

close to the product, some sound interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other
device that uses the same frequency (2.4/5.8GHz) near the product, some sound interruption may be heard due to interference. The transmission distance from the product to the wireless receiver module is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. If the product doesn't make wireless connection, the product needs ID Setting between the product and wireless receiver module. With the product turned off, press remote control's number buttons "0""1""3""5" and turn on the product. With the wireless receiver module turned on, press "ID SET" button on the back of the wireless receiver module for 5 seconds.
Do not insert any other card except the provided TX card.
If a different TX card is used, the product may be damaged or the card may not be removed easily.
Do not insert the TX card upside down or in the reverse direction. Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a

problem.

If the TX Card is inserted and wireless receiver module setting is complete, sound is not output from the
surround speaker connectors on the product.
The wireless receiver antenna is built into the wireless receiver module. Keep it away from water and

moisture.

For optimal listening performance, make sure that the area around the wireless receiver module location is
clear of any obstructions.
If no sound is heard from the wireless receiver module, switch the mode to DVD 5.1 channel or

Dolby ProLogic II.

In 2-CH mode, no sound will be heard from the wireless receiver module.
HT-C5500_ELS_ENG_0217.indd 21

9:22:53

Connecting External Devices/your TV via HDMI
HDMI is a standard digital interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set top box and more. HDMI removes any loss of signal from analogue conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. DVD or Blu-ray Player SAT(Satellite/Set top box)

1. Press the POWER button. The Home Menu will appear.
a Change Device d View Devices
Selects the Internet@TV. Selects the Videos. Selects the Music. Selects the Photos. Selects the Settings. Displays buttons available.

Setting the Menu

DISC MENU MENU TITLE MENU POPUP

RETURN TUNER EXIT

2. Press the buttons to select Settings, then press the ENTER button. 3. Press the buttons to select the desired submenu, then press the ENTER button. 4. Press the buttons to select the desired item, then press the ENTER button. 5. Press the EXIT button to exit the menu.
MENU Button : Press this to move to the home menu. RETURN Button : Return to the previous menu. ENTER / DIRECTION Button: Press the arrow buttons to move the cursor and select an item. Press the ENTER button to launch the selected item or conrm the setting. EXIT Button : Press this to exit the menu.
When the product is connected to the network,
select Internet@TV from the home menu. Download desired content from Samsung AppS. The access step may differ depending on the selected menu. The OSD (On Screen Display) may change in this product after upgrading the software version.
HT-C5500_ELS_ENG_0217.indd 29

9:23:07

Display
You can congure various display options such as the TV Aspect, Resolution, etc.
BD Wise (Samsung Products only)
BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically. Off : The output resolution will be xed according to the Resolution previously set, regardless of the resolution of the disc. On : The original resolution of the BD/DVD disc will be output to the TV.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting.

16:9 Normal

Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected.
If you want to change the resolution in BD
Wise, you must set BD Wise to Off in advance.

16:9 Wide

You can view the full 16:9 picture on your widescreen TV.
If you set off the BD Wise, the resolution of the
connected TV will be adjusted to its maximum resolution automatically. If the product is connected to a device that does not support BD Wise, you can not use BD Wise function. For a proper operation of BD Wise, set each BD Wise menu of the product and the TV to On respectively.

4:3 Letter Box

Select when you want to see the total 16:9 ratio screen Blu-ray Disc/DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

Resolution

Sets the output resolution of the Component and HDMI video signal. The number in 1080p, 1080i, 720p, 576p(480p), 576i(480i) indicates the number of lines of video. The i and p indicate interlace and progressive scan, respectively. Auto : It automatically checks and sets the optimal resolution. (HDMI only) BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On.) (HDMI only) 1080p : Outputs 1080 lines of progressive video. (HDMI only) 1080i : Outputs 1080 lines of interlaced video. 720p : Outputs 720 lines of progressive video. 576p/480p : Outputs 576(480) lines of progressive video. 576i/480i : Outputs 576(480) lines of interlaced video. (Component & VIDEO only)

Display Audio System Network Language Security General Support On-Screen Menu BD Data Management : Disc Current Device Menu External Flash: Memory :
Total Size Audio Delete BD Data Change Device : 955MB

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size. Size 1 : Display smaller application icons, you may see some black on sides of screen. Size 2 : Display normal application icons, image may be too large for your TV screen. Size 3 : Display larger application icons, image may be too large for your TV screen.
Subtitle : 949MB Available Size
| : External Flash Memory s Select r Return

2010-02-18 9:23:21

HT-C5500_ELS_ENG_0217.indd 36
Description of Device(Storage) Information on the Product Total Size : Total size of the Device (Storage). Available Size : Available size of the Device (Storage).

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content.
Display Audio System Network Language Security General Support Initial Setting Disc Menu : DivX(R) Video On Demand: Audio Your registration code is : XXXXXXXXXX Subtitle :
To learn more visit www.divx.com/vod OK
In the external memory mode, disc playback
will be stopped if you disconnect the USB device in the middle of the playback. Only those USB devices formatted in FAT le system (DOS 8.3 volume label) are supported, and it is recommended to use USB devices that support USB 2.0 protocol, 4 MB/sec or faster read/write speed. A USB HDD device cannot be used for BD Data storage (BD-LIVE). The Resume Play function may not work after formatting the storage device. The total size of BD Data Management may differ, depending on the software version.
This option is not activated if you select OK.
To activate this option, please activate the DivX(R) Deactivation.
Set time-related functions.

DivX(R) Deactivation

Select this to get a new registration code.
Display On-Screen Menu : Clock : Audio Clock Mode Disc MenuAuto : | System Clock Set Audio : Network Time Zone Subtitle : GMT + 0:00: Language DST : Off Security General > Move s Select r Return Support
Display Audio System Network Language Security General Support
Initial Setting Disc Menu : Audio : Subtitle : Do you want to deactivate your device?
Clock Mode : You can select Auto or Manual. If you select Manual, the Clock Set menu will be activated while DST will be deactivated. Clock Set : You can specify the current time and date manually. Time Zone : You can specify the time zone that is applicable to your area. DST : You can set DST (Daylight Saving Time) 1 hour, 2 hour and off.
This function can be operated when DivX(R)

Contact Samsung

Provide contact information for assistance with your product.
The Update will be completed when the
product turns off after restarting. Press the POWER button to turn on the updated product for your use. Never turn off or on the product manually during the update process. Samsung Electronics shall take no legal responsibility for product malfunction caused an unstable internet connection or consumer negligence during software upgrade.
HT-C5500_ELS_ENG_0217.indd 43

9:23:32

Basic Functions

Playing a Disc

Disc Structure
The contents of disc are usually divided as below. Blu-ray Disc, DVD-VIDEO
title 1 chapter 1 chapter 2 chapter 1 title 2 chapter 2 chapter 3

Playback

1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the discs label facing up. 3. Press the PLAY () button or OPEN/ CLOSE ( ) button to close the disc tray.

Audio CD (CD-DA)

track 1 track 2 track 3 track 4 track 5

Playback related buttons

PLAY ( )
MP3, WMA, DivX, MKV and MP4
folder (group) 1 le 1 le 2 le 1 folder (group) 2 le 2 le 3
Starts playback. Stops playback. If pressing the button once: The stop position will be memorized. If pressing the button twice: The stop position will be not memorized. (With some Blu-ray discs (BD-J), this function may not work.)
Using the Disc menu / Title menu / Popup menu

Using the Disc Menu

STOP ( )
1. During playback, press the DISC MENU button on the remote control. 2. Press the buttons to make the desired selection, then press the ENTER button.

PAUSE ( )

Pauses playback.
"Not Available" will appear when an invalid

button is pressed.

Depending on the disc, the menu items may
differ and this menu may not be available.

2010-02-18 9:23:33

HT-C5500_ELS_ENG_0217.indd 44

04 Basic Functions

Using the Title Menu
Using the Search and Skip Functions
1. During playback, press the TITLE MENU button on the remote control. 2. Press the buttons to make the desired selection, then press the ENTER button.
During playback, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.
Searching for a Desired Scene
During playback, press the SEARCH () button. Each time you press the SEARCH () button, the playback speed will change as follows.
BD-ROM, BD-RE/-R, DVD-RW/-R, DVD+RW/+R, DVD-VIDEO DivX, MKV, MP4 )1)2)3 ) 4 ) 5 ) 6 ) 7 (1(2(3 ( 4 ( 5 ( 6 ( 7 )1)2)3 (1(2(3
The Title Menu will only be displayed if there
are at least two titles on the disc.

Playing the Title List

1. During playback, press the DISC MENU or TITLE MENU button. 2. Press the buttons to select an entry you want to play from Title List, then press the ENTER button.
To return to normal speed playback, press the PLAY () button.

Using the Popup Menu

No sound is heard during search mode.
1. During playback, press the POPUP button on the remote control. 2. Press the buttons or ENTER button to select the desired menu.

Skipping Chapters

During playback, press the SKIP (#$) button. If you press the SKIP ($) button, it moves to the next chapter. If you press the SKIP (#) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.
HT-C5500_ELS_ENG_0217.indd 45

9:23:33

Slow Motion Play/Step Motion Play

Repeat Off

Slow Motion Play
In pause mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 To return to normal speed playback, press the PLAY ( ) button.
3. To return to normal play, press the REPEAT button again. 4. Press the buttons to select Off, the press the ENTER button.
Depending on the disc, the Repeat function

may not be available.

Repeat the Section
No sound is heard during slow mode. Slow motion operates only in the forward

direction.

1. During playback, press the REPEAT button on the remote control. 2. Press the buttons to select REPEAT A-B.

Repeat REPEAT A-B : Off

Step Motion Play
In pause mode, press the PAUSE ( ) button. Each time the PAUSE ( ) button is pressed, a new frame will be appear. To return to normal speed playback, press the PLAY ( ) button.

s Mark A

No sound is heard during step mode. Step motion operates only in the forward
3. Press the ENTER button at the point where you want repeat play to start (A). 4. Press the ENTER button at the point where you want repeat play to stop (B). 5. To return to normal play, press the REPEAT button again. 6. Press the ENTER button.

Provides a clear vocal as if listening in a concert hall. Provides also a clear vocal as if listening in a concert hall but, less powerful than HALL1. Recommended setting for Jazz. Gives the feel of being in a grand church. Recommended setting for Rock. Select this for normal listening.

JAZZ CHURCH ROCK SFE OFF

HT-C5500_ELS_ENG_0217.indd 51

9:23:49

Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode. Press the PL II button. When listening to music, you can experience sound effects as if you are listening to the actual performance. Adds realism to the movie soundtrack. You will experience a realistic multi-channel effect, as if using six speakers, while using just the front left and right speakers. You will hear multi channel surround sound. Select this to listen to sound from the front left and right speakers and the subwoofer only. Stop Slide Show : Select this if you want to stop the slide show. Slide Show Speed : Select this if you want to adjust the Slide Show speed. Background Music : Select this if you want to listen to music while viewing a picture. Zoom : Select this if you want to enlarge the current picture. (Enlarged up to 4 times) Rotate : Select this if you to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Information : Shows the picture information including the name and size, etc.
During the slide show playback, you can use various function by pressing the TOOLS button.
Stop Slide Show Slide Show Speed : Background Music Zoom Rotate Information Normal
MUSIC MOVIE PROLOG MATRIX STEREO

> Move

When selecting Dolby Pro Logic II mode,
connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound. This mode is available only with 2 channel audio.

Playing back a Picture

Playing a JPEG Disc
1. Insert a JPEG disc into the disc tray. 2. Press the buttons to select the Photos, and then press the ENTER button. 3. Press the buttons to select the folder you want to play, and then press the ENTER button. 4. Press the buttons to select the photo you want to play, and then press the ENTER button.
To enable the Background Music function,
both music and MP3 les must be contained in the same folder. However, the sound quality can be affected by the bit rate of the MP3 le, the size of the photo and the encoding method.

Description on RDS function
PTY (Program Type) : Displays the type of programme currently being broadcast.

2010-02-18 9:23:58

HT-C5500_ELS_ENG_0217.indd 54
PTY (Program Type) indication and PTY-SEARCH function
One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

Using an iPod

You can enjoy music, video les from an iPod through the product.
FM ANT WIRELESS iPod DIDITAL AUDIO IN

HDMI O HDMI

ANCE : 3
To search for a program using the PTY codes Before you start!
The PTY Search is only applicable to preset stations. To stop searching any time during the process, press PTY SEARCH button while searching. There is a time limit in doing the following steps. If the setting is cancelled before you nish, start from step 1 again. When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.

No disc

You can play music les stored in the iPod player by connecting it to the product.
Please activate Internet@TV serviceTube You Tube You internet radio to enjoy a variety of Internet Services.

iPod iPod No Disc

a Change Device d View Devices s Enter
1. Press the PTY SEARCH button while listening to an FM station. 2. Press the PTY- or PTY+ button until the PTY code you want appears on the display. The display gives you the PTY codes described to the right. 3. Press the PTY SEARCH button again, while the PTY code selected in the previous step is still on the display. The centre unit searches 15 preset FM stations, stops when it nds the one you have selected, and tunes in that station.
1. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. 2. Place the iPod in the supplied iPod Dock. Your iPod is automatically turned on. iPod message appears on the TV screen. 3. Press the RED(A) button. 4. Press the buttons to select iPod, then press the ENTER button. 5. Press the buttons to select Music, then press the ENTER button. 6. Select the music le to play. - You can use the remote control or product to control simple playback functions such as the PLAY, PAUSE, STOP, #/ $, / and REPEAT buttons. See page 15.
HT-C5500_ELS_ENG_0217.indd 55

9:24:00

Adjust the volume to a moderate level before
you connect your iPod and product.

Watching a Movie

You can play video les stored in the iPod player by connecting it to the product. 1. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. 2. In the iPod screen, move to Settings > Videos, then set the TV Out option and the TV signal. 3. Place the iPod in the supplied iPod Dock. iPod message appears on the TV screen. 4. Press the RED(A) button. 5. Press the buttons to select iPod, then press the ENTER button. 6. Press the buttons to select Videos, then press the ENTER button. 7. Select the video le to play. - You can use the remote control or the product to control simple playback functions such as the PLAY, PAUSE, STOP, # /$ and /buttons. (See page 15.)

The application service may be provided in
English only and the contents available may vary, depending on the area.
For more information about the Internet@TV
service, visit the web site of the applicable service provider.
The services provided are subject to change,
depending on the Internet@TV service provider.
The Internet@TV service contents may differ
according to the rmware version.
For-a-fee DivX contents with copy protection
can only be played using HDMI cable. If you have connected your player to your TV using Component or video cables, the DivX video signal can not output or the popup message Connect with a HDMI cable to play this le.or Cannot play current le will be displayed.

7. 8. 9.

10. Press 2 button on the remote 3 times to input C. 11. Press the FULL SCREEN button on the remote 3 times to change the input mode from upper case to lower case. 12. Press buttons on the remote to input the rest of Challenger Rd., Ridgeeld Park NJ.

2010-02-18 9:24:08

HT-C5500_ELS_ENG_0217.indd 58

Account Login

For a more enjoyable application experience, register and log in to your account. To do this, you must create an account rst. (For instructions on creating an account, refer to Internet@TV ID on this page) 1. Press the buttons to select the desired application and press the RED(A) button.

System Setup

Reset Resets Internet@TV settings to factory default settings.
If you forgot your password, press the STOP
() button on the front panel of the product for more than 5 seconds with no disc inserted.

Internet@TV ID

User Account : Password : adgim
Use this menu to create or delete an account and enter or delete account information. You can control your account including contents sites account information. This account is only for Internet@TV. Create Create an account and link it with desired service applications.

a Create

[0~9] Enter PIN ' Cancel
Enter the user account and password.
Create IDs and congure Internet@TV settings from this screen.
System setup Internet@TV ID Service Manager Properties Change the Service Lock password Reset
The account name must be at least 1
character in length but no more than 8.
You can register up to 10 User Account
Names. Manager Service Site : Register login information for service sites. Change Password : Change account password. Delete : Delete the account.

' Cancel

HT-C5500_ELS_ENG_0217.indd 59

9:24:08

Service Manager
Delete and lock applications installed to Internet@ TV. Lock Lock the application. Accessing a locked application requires the password. Delete Delete the application. Using the colour buttons with the Samsung Apps RED(A) (Login) : To log in to the internet service. GREEN(B) (Thumbnail View) : To change the view mode. BLUE(D) (Sort By) : To sort the applications by Featured, Most Downloaded, Most Recent or Name.

the sever function.

The search and skip operation may differ
depending on the sever function.
During video playback, play time will not

display.

To use AllShare function, please locate both
this product and PC in same subnet.

2010-02-18 9:24:11

HT-C5500_ELS_ENG_0217.indd 62

Other information

Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Centre.

06 Other information

Symptom
I cannot eject the disc. The iPod fails to connect. Playback does not start.

Check/Remedy

Is the power cord plugged securely into the outlet? Turn off the power and then turn it back on. Check the condition of the iPod connector and Dock. Keep the iPod S/W version up to date. Check the region number of the BD/DVD. BD/DVD discs purchased from abroad may not be playable. CD-ROMs and DVD-ROMs cannot be played on this Product. Make sure that the rating level is correct. Are you using a deformed disc or a disc with scratches on the surface? Wipe the disc clean. No sound is heard during fast playback, slow playback, and step motion playback. Are the speakers connected properly? Is the speaker setup correctly customized? Is the disc severely damaged? On certain BD/DVD discs, sound is output from the front speakers only. Check if the speakers are connected properly. Adjust the volume. When listening to a CD, radio or TV, sound is output to the front speakers only. PL II (Dolby Pro Logic II) on the remote Select "PRO LOGIC II" by pressing control to use all six speakers. Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound. Is the audio language correctly set to Dolby Digital 5.1-CH in the information display? Is the remote control being operated within its operation range of angle and distance? Are the batteries drained? Have you selected the mode(TV/BD) functions of the remote control (TV or BD) correctly? Is the TV power on? Are the video cables connected properly? Is the disc dirty or damaged? A poorly manufactured disc may not be playable. Audio language and subtitles will not work if the disc does not contain them. Are you using a disc that does not contain menus?

Playback does not start immediately when the Play/Pause button is pressed. Sound is not produced.
Sound can be heard only from a few speakers and not all 6.
Dolby Digital 5.1 CH Surround Sound is not produced.
The remote control does not work.
Disc is rotating but no picture is produced. Picture quality is poor and picture is shaking. Audio language and subtitles do not work. Menu screen does not appear even when the menu function is selected.
HT-C5500_ELS_ENG_0217.indd 63

9:24:12

Aspect ratio cannot be changed.
You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. Turn off the power, and press and hold the STOP ( I ) button on the product for longer than 5 seconds with no disc inserted. - Using the RESET function will erase all stored settings. Do not use this unless necessary. With no disc in the product, press and hold the product's STOP ( I ) button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. And then press the POWER button. - Using the RESET function will erase all stored settings. Do not use this unless necessary.
The product is not working. (Example: The power goes out or a strange noise is heard.) The Product is not working normally. The rating level password has been forgotten.
Can't receive radio broadcasts.
Is the antenna connected properly? If the antenna's input signal is weak, install an external FM antenna in an area with good reception. If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the D.IN or AUX functions, the BD/DVD functions are turned on and the TV audio is muted. The features or action cannot be completed at this time because: 1. The BD/DVDs software restricts it. 2. The BD/DVDs software doesnt support the feature (e.g., angles) 3. The feature is not available at the moment. 4. Youve requested a title or chapter number or search time that is out of range. Press and hold the STOP ( I ) button on front panel for more than 5 seconds with no disc inserted. All settings will revert to the factory settings. When the factory default settings are restored, all the user data stored in the BD data will be deleted. Check the connection between the TV and the HDMI jack of the Product. Check if your TV supports 576p(480p)/720p/1080i/1080p HDMI input resolution. If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection).
While listening to TV audio through the Product, no sound is heard. "Not Available" appears on screen.

If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. No HDMI output.
Abnormal HDMI output screen.

2010-02-19 4:27:29

HT-C5500_ELS_ENG_0217.indd 64
Symptom PC Share Manager function
I can see folders shared through the PC Share Manager, but I cannot see the les.
Since it shows only les corresponding to the Image, Music, and Movie categories, les that do not correspond to these categories may not be displayed.

AllShare function

Video is played intermittently. Check if the network is stable. Check if the network cable is properly connected and if the network is not overloaded. Wireless connection between the server and the product is unstable. Check the connection. IP address under the same subnetwork should be unique, otherwise IP collision can results in such a phenomenon. Check if you have a rewall enabled. If so, disable the rewall function.
AllShare connection between TV and PC is unstable.
I cannot connect to the BD-LIVE server. Check whether the network connection is successful or not by using Network Test menu. (See page 41) Check whether the USB memory device is connected with product or not. The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 36) Please check whether the BD-LIVE Internet Connection menu is set to Allow(All). If all above fails, contact the contents provider or update the latest rmware. The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 36)
When using the BD-LIVE service, an error occurs.
When the factory default settings are restored, all the user data stored in the BD data will be deleted.
HT-C5500_ELS_ENG_0217.indd 65

9:24:13

Specications
Weight 3.5 kg 430 (W) x 63 (H) x 325 (D) mm +5C to +35C 10 % to 75 % 70 dB 10 dB 0.5 % Reading Speed : 4.917m/sec Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min. 1 channel : 1.0 Vp-p (75 load) Blu-ray Disc : 576i(480i) Y : 1.0 Vp-p (75 load) Pr : 0.70 Vp-p (75 load) Component Video Pb : 0.70 Vp-p (75 load) Blu-ray Disc : 1080i, 720p, 576p(480p), 576i(480i) DVD : 576p(480p), 576i(480i) DVD : 576i(480i) Dimensions Operating Temperature Range Operating Humidity Range Signal/noise ratio