HW-C700 HW-C700B HW-C770S HW-C770BS

AV Receiver System

user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at

www.samsung.com/register

HW-C700-C770S-C770BS-XAA_0305.in1 1

2010-03-17

1:30:12

Safety information

SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
WARNING To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture. To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with the installation instructions. CAUTION Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus. The Mains plug is used as a disconnect device and shall stay readily operable at any time. This product satises FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution : FCC regulations state that any unauthorized changes or modications to this equipment may void the user's authority to operate it.
HW-C700-C770S-C770BS-XAA_0305.in2 2

1:30:18

IMPORTANT SAFETY INSTRUCTIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment. This equipment should be installed and operated with minimum distance 7.9 inches between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian Department of Communications Radio Interference Regulations This digital apparatus (Wireless Internet Radio) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) 2) 3) 4) 5) 6) 7) 8) 9) Read these instructions. Keep these Instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachment/accessories specied by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.
Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding.

Dolby Pro Logic llz

Dolby Pro Logic IIz adds front height channels to surround sound, creating a 7.1 playback system for video games, home music, and movies; bringing enhanced spatial effects and enveloping sound.
You can enjoy music les by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock.

DTS 96/24

DTS 96/24 encodes standard 16 bit/44.1 kHz sound to 24 bit/96kHz and applies it to a 5.1 CH sound track.
SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing
Provides more realistic surround sound with normal stereo audio sources.

DOLBY DIGITAL EX

Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
DTS (Digital Theater Systems)
DTS provides a discrete 5.1 CH digital audio signal for both music and movie contents and uses less compression than Dolby Digital for richer sound.
DTS-ES (Extended Surround)
The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc. Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360degree surround effect. DTS-ES adds an additional rear center surround channel for 6.1 channel sound.

Dolby Digital Plus

Dolby Digital Plus is the next-generation audio technology for all high-denition programming and media.

Dolby True-HD

Dolby True-HD is Dolbys next-generation lossless technology developed for high-denition disc-based media.

ACCESSORIES

INPUT SELECT TV SOURCE AMP/TV DIMMER BD/DVD

NEO : 6

PROLOGIC

AUDIO ASSIGN

TUNING /CH

TUNER MEMORY

SUBWOOFER

SETUP/MENU

RETURN

BD/DVD

MULTI CH

VCR / AUX

Remote Control (AH59-02307A)/ Batteries (AAA size) (4301-000116)

FM antenna (AH42-00017A)

Users manual (AH68-02260R)

iPod Dock (AH96-00051A)

ASC microphone ( AH30-00099A )
HW-C700-C770S-C770BS-XAA_0305.in5 5

1:30:22

Contents

SAFETY INFORMATION

FEATURES
Safety Warnings Important Safety Instructions Precautions

Accessories

DESCRIPTION

CONNECTIONS

Front Panel Rear Panel Display Insert Remote Control Batteries Operation Range of the Remote Control Tour of the Remote Control
Speaker Positioning Connecting the Speakers Connecting External Devices/Your TV via HDMI HDMI Function Connecting to your TV Connecting a DVD or BD(Blu-ray) Player Connecting a Cable, Satellite or Set-top Box Connecting a VCR Connecting a CD Player Connecting 7.1 Channel Devices Connecting an iPod Connecting the FM Antenna Connecting Aux Components
BASIC FUNCTIONS OF YOUR AV RECEIVER
Before Using the AV Receiver Audio Setup Selecting Digital/Analog Input
HW-C700-C770S-C770BS-XAA_0305.in6 6
Setup Menu Tree Setting the Speaker Size Setting the Speaker Listening Distance Setting the Speaker Level Setting the Test Tone Setting Dolby Pro Logic Mode Setting Dolby Pro Logic IIx Setting Dolby Pro Logic IIz Setting Tone Control Setting NEO:6 Mode Setting EX/ES Mode AV SYNC MP3 Enhancer Smart Volume ASC (Auto Sound Calibration) Setup DRC Setup HDMI Setup Variable Set Using the Surround Modes Using the Subwoofer Selection Button Listening to the Radio Using an iPod Convenient Functions Software Upgrade Operating Your TV With the Remote Control Operating your DVD or BD player with the remote control

CONTENTS

OPERATION

MISCELLANEOUS

TROUBLESHOOTING

Troubleshooting

APPENDIX

59 Specications

HW-C700-C770S-C770BS-XAA_0305.in7 7

Description

FRONT PANEL
HEADPHONE JACK AUX IN JACKS ASC MIC JACK DISPLAY S.DIRECT/STEREO BUTTON MULTI CH BUTTON AV SYNC BUTTON VOLUME CONTROL POWER
Used to connect a set of headphones. Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device. Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration). Displays the speaker/audio input status, listening mode, etc. Used to select the S.DIRECT or STEREO mode. Used to select a connected 7.1 multi channel player. Used to select the Audio Delay Mode. Adjusts the volume level. Turns the receiver on/off.
HW-C700-C770S-C770BS-XAA_0305.in8 8

1:30:23

INPUT SELECT BUTTON
Used to select a source. (FM BD/DVD SAT TV VIDEO).

VCR CD

7.1 MULTI CH

IPOD AUDIO

AUDIO ASSIGN BUTTON SOUND EFFECT BUTTON SETUP BUTTON UP(,), DOWN(.), LEFT(<), RIGHT(>) BUTTONS ENTER BUTTON TONE CONTROL BUTTON ASC BUTTON TUNING MODE BUTTON SELECT BUTTON MEMORY BUTTON
Toggles to select an input mode for the selected source. DESCRIPTION Toggles to select a surround sound mode. Displays the SETUP menu. Used to move the cursor up, down, left or right. Also used to select detailed options in the SOUND EFFECT mode and to change the tone level. Used to select an item in the SETUP menu. Used to set the bass, treble level and tone to on/off. Used to select the ASC (Auto Sound Calibration) mode. Used to select the Manual or Preset mode for FM radio. Used to change the radio frequency. Used to set a preset radio frequency.
HW-C700-C770S-C770BS-XAA_0305.in9 9

REAR PANEL

HW-C700-C770S-C770BS-XAA_0305.in10 10
FM ANTENNA JACK MULTI CH IN JACKS HDMI IN JACKS HDMI OUT JACK USB PORT COMPONENT VIDEO IN JACKS COMPONENT VIDEO OUT JACKS iPod JACK OPTICAL IN JACKS (DIGITAL AUDIO IN) COAXIAL IN JACK (DIGITAL AUDIO IN) VCR VIDEO IN JACK VCR VIDEO OUT JACK VIDEO IN JACKS VIDEO OUT JACK VCR AUDIO IN JACKS VCR AUDIO OUT JACKS AUDIO IN JACKS SUBWOOFER AUDIO OUT JACKS SPEAKER OUT TERMINALS
Connect the FM Antenna here. Receives the analog audio signal from an external player with a multi-channel port. Receives digital video and audio signals simultaneously using an HDMI cable. DESCRIPTION Outputs digital video and audio signals simultaneously using an HDMI cable. Can be only used for rmware upgrades. Receives the component video signal. Outputs the component video signal. Receives the audio/video signal from an iPod. Receives the digital optical audio signal. Receives the digital coaxial audio signal. Receives the video signal from a VCR. Outputs the video signal to a VCR. Receives the video signal from a video player (BD/DVD, SAT,TV). Outputs the video signal to video devices (TV, Projector etc). Receives the audio signal from a VCR. Outputs the audio signal to a VCR. Receives the audio signal from a video player (BD/DVD, SAT,TV, CD). Connect the subwoofers. Speaker connection terminals.

HW-C700-C770S-C770BS-XAA_0305.in11 11

1:30:24

DISPLAY
SPEAKER INDICATORS LISTENING MODE INDICATORS TUNING INDICATORS AUDIO INPUT INDICATORS SPEAKER LEVEL INDICATOR RADIO FREQUENCY INDICATORS MESSAGE DISPLAY Displays the connected speakers. Displays the current listening mode. Displays the status of the current radio broadcast. Displays the audio input signal type of the currently connected external audio source. Displays the speaker level. Displays the current radio frequency range. Informs you of the status of the receiver.
HW-C700-C770S-C770BS-XAA_0305.in12 12
INSERT REMOTE CONTROL BATTERIES

* Batteries (AAA size)

DESCRIPTION
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and () to (). Assuming typical TV usage, the batteries last for about one year. Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose the batteries to heat or a ame.
OPERATION RANGE OF THE REMOTE CONTROL
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30 from the remote control sensor.

INPUT SELECT TV SOURCE

AMP/TV

DIMMER

HW-C700-C770S-C770BS-XAA_0305.in13 13
TOUR OF THE REMOTE CONTROL
RETURN EXIT BD/DVD SAT TV CD MUTE AMP/TV DIMMER BD/DVD
HW-C700-C770S-C770BS-XAA_0305.in14 14

1:30:25

POWER BUTTON AMP/TV BUTTON NUMBER BUTTONS NEO : 6 BUTTON PROLOGIC BUTTON SKIP BUTTONS STOP/PLAY BUTTON MUTE BUTTON VOLUME CONTROL BUTTONS SUBWOOFER BUTTON TUNER MEMORY BUTTON SETUP/MENU BUTTON UP/DOWN/LEFT/RIGHT BUTTONS RETURN BUTTON FUNCTION SELECTOR BUTTONS INPUT SELECT, TV SOURCE BUTTON DIMMER BUTTON BD/DVD BUTTON SLEEP BUTTON AUDIO ASSIGN BUTTON DSP BUTTON SEARCH BUTTON PAUSE BUTTON TUNING/CHANNEL BUTTONS ASC BUTTON MO/ST BUTTON INFO BUTTON ENTER BUTTON EXIT BUTTON
Turns the receiver on/off. Used to select the AMP/TV mode. - If you select the AMP mode, the button will ash orange. - If you select the TV mode, the button will ash green. Used to select a TV channel. Select the desired NEO:6 mode. Select the desired Dolby Pro Logic audio mode. Press to skip backwards or forwards on a connected DVD/BD player or iPod. Press to stop/start playback on a connected DVD/BD player or iPod. Mutes the sound of a connected device. Adjusts the volume of the selected device. Used to select the Subwoofer. Used to set a preset radio frequency. Displays the SETUP menu. Used to navigate the menus. Used to return to the previous menu from the SETUP menu. Used to select an input source. Toggles to nd and select an input source. Press to select a connected TV's video source. Adjusts the brightness of the display. Used to select the BD/DVD mode. - If you select the BD mode, the button will ash orange. - If you select the DVD mode, the button will ash green. Used to set the Sleep Timer. Toggles to select an input mode for the selected source. Used to select the SFE mode. Press to search backwards or forwards. Pauses playback on a connected device. Used to change the radio broadcasting frequency or TV channel. Used to set the Auto Sound Calibration function. Select MONO or STEREO for radio broadcasts. Display information on the connected device currently being used. Used to select an item in the SETUP menu. Exits the SETUP menu.

1. Fasten 2 screws(not supplied) for each speaker on the wall above the front L and R speakers. 2. Install the Surround Back Speakers (L, R) by tting the holes on the back the Surround Back Speakers to the screws on the wall.
When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.

Speaker Conguration

For the best surround-sound experience, you should connect seven speakers and a powered subwoofer. The following table shows which channels you should use based on the number of speakers you have. 2 speakers 3 speakers 4 speakers 5 speakers 6 speakers 7 speakers

(DPL IIx)

7 speakers

(DPL IIz)

SBL SBR
No matter how many speakers you use, a powered subwoofer is recommended for powerful and solid bass. by the speaker. If this occurs, place the speaker away from your TV set.
If you place a speaker near your TV set, screen color may be distorted because of the magnetic eld generated 17
HW-C700-C770S-C770BS-XAA_0305.in17 17

1:30:26

CONNECTING THE SPEAKERS
FRONT (R) SURROUND (R) SURROUND BACK (R) PS-FC770S PS-RC770S PS-BC770S SURROUND BACK (L) SURROUND (L) FRONT (L) PS-BC770S PS-RC770S PS-FC770S
ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER) PS-AW730
Model HW-C700/C700B AV Receiver CENTER PS-CC770S Model HW-C770S/C770BS AV Receiver FRONT SPEAKER CENTER SPEAKER SURROUND SPEAKER SURROUND BACK SPEAKER ACTIVE SUBWOOFER
HW-C700/C700B HW-C770S/C770BS PS-FC770S PS-CC770S PS-RC770S PS-BC770S PS-AW730
Speakers are provided with model HW-C770S/HW-C770BS only. Model HW-C700/C700B does not come with speakers. player and connect it to the other SUBWOOFER OUT Jack.
One Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought the When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT HEIGHT

Connecting Speaker Wire

1. Loosen the knob by turning counterclockwise. 2. Insert the bare part of the wire into the hole in the side of each terminal. 3. Tighten the knob by turning clockwise to secure the wire.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects into the duct (hole). Never touch speaker terminals while the power is on. Doing so could result in electric shock. Make sure the polarities (+ and -) are correct.

Connecting the Speakers

1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal () and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the AV Receiver. Make sure the colors of the speaker terminals on the back of the AV receiver match the colors of the connecting plugs.

PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to MUSIC. You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital, Dolly Digital +,
Dolby true HD, DTS, DTS-HD Master Audio.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. When Dolby Pro Logic IIz is set ON, Dolby Pro Logic IIx can not be used.
HW-C700-C770S-C770BS-XAA_0305.in40 40
SETTING DOLBY PRO LOGIC IIz
Dolby Pro Logic IIz adds front height channels to surround sound. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select DPLIIZ SETUP, and then press the ENTER or button. 4. Press the buttons. Each time you press this button, HEIGHT OFF selected in turn. HEIGHT ON will be
If Dolby Pro Logic IIz is set to On, the Surround Back speaker in the speaker size mode is changed to NONE,
the Front Height Speaker will be turned on. If Dolby Pro Logic IIz is set to OFF, the surround back speaker and front height speaker can't be turned to default setting.
If you change Dolby Pro Logic IIz mode to Dolby Pro Logic IIx mode, rst Dolby Pro Logic IIz will be
turned off, second FRONTH in the speaker size mode will be turned off, lastly the Surround Back Speaker will be turned on. If you turn Dolby Pro Logic IIz on, FRONTH in the speaker size mode and the Surround Back Speaker can not be changed to NONE.

SETTING TONE CONTROL

This will enable you to adjust the bass and treble level. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select TONE CONTROL, and then press the ENTER or button. 4. Press the buttons to select the option you want, and then press the ENTER or button. Each time you press this button, TONE BASS TREBLE will be selected in turn. 5. Press the buttons to set the Tone Control mode you want. If it is set to TONE OFF, the Tone Control function will be disabled. You can adjust it from -6 to +6dB by 1 step. The sound gets quieter at -6dB and louder at +6dB. - To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited.

This function is not available after the Tone Control, Speaker Level, SFE mode or ASC is changed from the factory setting.
HW-C700-C770S-C770BS-XAA_0305.in46 46

1:31:23

Operation

USING THE SURROUND MODES

Using the SOUND EFFECT button on the front of the main unit
Selecting the DPLIIx mode
1. Press the SOUND EFFECT button to select DPLIIX. Each time you press this button, DPLIIX NEO:6 SFE will be selected in turn.

OPERATION

2. Press the UP/DOWN ( ,,. ) button. Each time you press the UP/DOWN ( ,,. ) button, MUSIC GAME MATRIX PL MOVIE will be selected in turn. You can also select the DPLIIx mode by pressing the PROLOGIC button on the remote control.

Selecting the NEO:6 mode

1. Press the SOUND EFFECT button briey to select NEO:6. Each time you press this button, DPLIIX NEO:6 SFE will be selected in turn. 2. Press the UP/DOWN ( ,,. ) button. Each time you press the UP/DOWN ( ,,. ) button, MUSIC CINEMA will be selected in turn. You can also select the NEO:6 mode by pressing the NEO : 6 button on the remote control.

Selecting the SFE mode

1. Press the SOUND EFFECT button to select SFE. Each time you press this button, DPLIIX NEO:6 SFE will be selected in turn.
2. Press the UP/DOWN ( ,,. ) button. Each time you press the UP/DOWN ( ,,. ) button, STEREO HALL 1 HALL 2 J.CLUB CHURCH ROCK CLASSIC LIVE GAME MOVIE CONCERT STADIUM will be selected in turn. You can also select the SFE mode by pressing the DSP button on the remote control.
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS. 48KHz.
Pro Logic works only for BITSTREAM audio signals with sampling frequencies of 32KHz, 44KHz or If you turn Dolby Pro Logic IIz on, the Dolby Pro Logic IIx mode is only available MOVIE.
Using the S.DIRECT/STEREO button on the front of the main unit
Press the S.DIRECT/STEREO button.
Each time the button is pressed, the mode switches between the S. DIRECT mode and the STEREO mode. S.DIRECT : Outputs 2 CH PCM audio signal without any signal processing, providing higher audio quality. This is useful for obtaining the best sound from a connected CD player. STEREO : Outputs sound of the selected source in 2 CH stereo.

True-HD Dolby Digital + DTS-HD
L/R : front speaker (left/right) C : center speaker SL/SR : surround speaker (left/right) SBL/SBR : surround back speaker (left/right) SW : subwoofer
Channel status displays are dependent on the speaker conguration.
SFE mode works with 2-ch signals. If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front Height
Speaker(FHL/FHR), Dolby true HD, Dolby plus, DTS-HD Master Audio ,SFE and NE0:6 will be output 5.1 channel.
USING THE SUBWOOFER SELECTION BUTTON
You can set the subwoofer to on/off. Press the SUBWOOFER button.
HW-C700-C770S-C770BS-XAA_0305.in48 48

1:31:24

LISTENING TO THE RADIO
You can listen to the radio by using either automatic or manual tuning. 1. Press the INPUT SELECT button to select FM. 2. Select a frequency (radio broadcast). Preset tuning : Press the #,$ buttons on the remote control to select the preset frequency. Manual tuning 1 (Automatic tuning): Press and hold the TUNING/CH (.,, ) buttons on the remote control to automatically tune in a frequency. Manual tuning 2 : Press the TUNING/CH (.,, ) buttons on the remote control to increase or decrease the frequency step by step. OPERATION
You can also use the SELECT (.,,) button on the main uint to change the radio frequency.
To Listen in mono/stereo Press the MO/ST button on the remote control. Each time you press this button, STEREO or MONO will be selected in turn. If you select MONO in an area with weak reception, it will help to reduce noise. This function works only with the remote control.
Presetting radio stations
You can preset up to 30 FM stations. E.g.: Setting station FM 89.10 in preset 2. 1. Press the INPUT SELECT button to select FM. 2. Press the TUNING/CH (.,, ) buttons on the remote control to select 89.10. Refer to step 2 above to tune in automatically and manually. 3. Press the MEMORY button on the main unit. You can also use the TUNER MEMORY button on the remote control. Tuner number will blink on the display. 4. Press the TUNING/CH (.,, ) buttons on the remote control to select preset 2. You can select from presets 1 to 30. 5. Press the MEMORY button on the main unit. Tuner number will disappear and station 89.10 will be saved in preset 2. 6. To preset other stations, repeat steps 2 to 5.

To Listen to Preset Station Press the TUNING MODE button to select PRESET and press the SELECT (.,, ) buttons.
HW-C700-C770S-C770BS-XAA_0305.in49 49

USING AN iPod

You can enjoy playback of your iPod using the supplied remote control.
Listening to Music (iPod audio function)
You can play music les stored in the iPod player by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV Receiver. 2. Place the iPod in the dock. Your iPod is automatically turned on. 3. Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode. 4. Press the PLAY button on the remote control to play. The AV receiver starts playing from the rst track of the iPod player. 5. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons.
See page 28 for compatible iPods. Compatibility depends on the software version of your iPod. You can also select iPod by pressing the iPod button on the remote control.
HW-C700-C770S-C770BS-XAA_0305.in50 50
USING AN iPod (Continued)
Watching a Movie (iPod Video function)
You can play video les stored in the iPod player on a TV by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV receiver. 2. In the iPod screen, move to Videos > Settings and set the TV Out option to On. 3. Place the iPod in the dock. 4. Press the INPUT SELECT button on the remote control to select IPOD VIDEO mode. 5. Set the AV IN option of the TV connected to the AV receiver to COMPOSITE. Follow the iPod onscreen guide through the following steps. 6. Press the , buttons on the remote control to select Videos and press the ENTER button. 7. Press the , buttons on the remote control to select Movies and press the ENTER button. 8. Press the , buttons to select the le to play and press the ENTER button. The iPod's video les will be played on the TV screen. 9. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons. If you press the PREV button within 3 seconds after the playback, the player will stop playing and return to the list screen. If you press the PREV button 3 seconds or later after the playback, the player will move to the start screen of the current le. Press the STOP button to stop playing and return to the list screen. Press the RETURN button to return to the previous menu. OPERATION

<iPod Screen>

You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video. Compatibility depends on the software version of your iPod.
See page 28 for compatible iPods. When the current le is played to the end, the next le will not be played automatically.

Insert a USB drive containing the rmware upgrade into the USB port
on the back of the main unit.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off automatically after completing the rmware upgrade. When software is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
If you failed software upgrade, it is strongly recommended whole USB data
format to FAT16 and retry software upgrade.
The NTFS USB File System can not be supported. Depending on the manufacturer, the USB may not be supported. 53
HW-C700-C770S-C770BS-XAA_0305.in53 53

1:31:26

Miscellaneous
OPERATING YOUR TV WITH THE REMOTE CONTROL
1. Press the POWER button to turn on the TV. 2. Press the AMP/TV button to set the remote to TV mode. 3. Point the remote control toward the TV. 4. While holding down the POWER button, enter the code corresponding to your brand of TV. If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. If the code matches the TV's code, the TV will be turned off. 5. If TV is turned on or off when you press the POWER button of the remote control, the setting is completed. You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9).
The remote control may not work on some brands of TVs. Also, some operations may not be possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
HW-C700-C770S-C770BS-XAA_0305.in54 54

1:31:28

OPERATING YOUR TV WITH THE REMOTE CONTROL (Continued)

TV Brand Code List

Admiral (M.Wards) A Mark Anam

Code Number

056, 057, 058 001, 015 001, 002, 003, 004,005, 006, 007, 008, 009, 010, 011, 012, 013, 014 001, 018, 040, 048 057, 058, 081 059, 003 003, 018, 003, 005, 061, 082, 083, 003 059, 061, 002, 003, 004, 015,016, 017, 018, 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 032, 034, 035, 036, 040, 048, 059, 090, 099, 003 003, 015, 040, 046, 059, 061, 064, 082, 083, 084, 085 019, 065, 003 006, 040, 056, 059, 066, 067, 015, 018, 050, 059, 056, 059, 067, 059, 061, 087, 088 003, 015, 001, 015, 016, 017, 037, 038, 039, 040, 041, 042, 043, 044, 054, 086

Luxman LXI (Sears) Magnavox Marantz Matsui MGA Mitsubishi/MGA MTC NEC Nikei Onking Onwa Panasonic Penney Philco Philips
018 019, 054, 056, 059, 060, 062, 063, 065, 071 015, 017, 018, 048, 054, 059, 060, 062, 072, 089 040, 018, 040 018, 040, 054, 059, 060, 075, 018, 019, 020, 040, 059, 006, 007, 008, 009, 054, 066, 067, 073, 003, 015, 017, 018, 048, 054, 059, 062, 069, 090 015, 017, 018, 040, 048 054, 062, 072, 112, 114, 117, 118 063, 066, 080, 091 015, 018, 006, 066, 067 017, 048, 056, 060, 061, 075 018, 059, 067, 076, 077, 078, 092, 093, 094 003, 000, 015, 016, 017, 040, 043, 046, 047, 048, 049, 054, 059, 060, 098 019, 061, 065, 101, 102, 103, 104 003, 040, 060, 061 015, 018, 019 015, 057, 064, 101, 105, 106, 115 057, 058 050, 051, 052, 053, 055, 101 003, 018
Sylvania Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech Videch Wards Yamaha York Yupiteru Zenith Zonda Dongyang LOWE FINLUX YOKO LOEWE OPTA PHONOLA RADIOLA SCHNEIDER AKAI GRUNDIG BLAUPUNKT SIEMENS CGE IMPERIAL MIVAR SABA BANG&OLUFSEN BRIONVEGA FORMENTI METZ WEGA RADIOMARELLI SINGER SINUDYNE TELEFUNKEN
018, 040, 048, 054, 059, 060, 062 061, 095, 018 003, 015, 018, 025 018, 040 019, 057, 063, 071, 101 107, 109, 110, 111, 059, 060, 069 015, 017, 018, 040, 048, 054, 060, 058, 003, 054, 109, 054, 114 054, 112, 114 054, 103 108, 109, 113, 119, 120, 114 116

MISCELLANEOUS

AOC Bell & Howell (M.Wards) Brocsonic Candle Cetronic Citizen CINEMA Classic Concerto Contec Coronado Craig Croslex Crown CURTIS MATHES CXC Daewoo
Pioneer Portland Proton QUASAR Radio Shack RCA/Proscan Realistic Sampo Samsung

Daytron Dynasty Emerson

Fisher Funai Futuretech General Electric (GE) Hall Mark Hitachi Inkel JC Penny JVC KTV KEC KMC LG (Goldstar)
Sanyo Scott Sears Sharp Signature 2000 (M.Wards) Sony Soundesign Spectricon SSS
HW-C700-C770S-C770BS-XAA_0305.in55 55
OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL
1. Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works. If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off. 5. If DVD (BD) is turned on or off when you press the POWER button of the remote controller, the setting is completed. You can use DVD (BD) POWER, PLAY, PAUSE, STOP, SKIP, MENU and Numeric buttons (0~9).
The remote control may not work on some brands of DVD. Also, some operations may not be possible depending on your brand of DVD.
The remote control will work with Samsung DVD (BD) by default.

HW-C700-C770S-C770BS-XAA_0305.in61 61

QUESTIONS OR COMMENTS?

COUNTRY IN THE US CALL 1-800-SAMSUNG (7267864) OR VISIT US ONLINE AT www.samsung.com/us WRITE Samsung Electronics America, Inc. 105 Challenger Road Ridgeeld Park, NJ 07660-0511

Code No. AH68-02260R

HW-C700-C770S-C770BS-XAA_0305.in62 62

Home Theater

PRODUCT HIGHLIGHTS
rystal Amplifier Pro C 7.1 channel 3D Surround Sound HDMI 1.4 for 3D dunt vullut la commy nummolu msandre dunt vullut la commy nummolu msandre
Treat your ears to a new dimension in sound, every time you watch your favorite 3D movies and shows. The Samsung HW-C770BS Home Theater System offers unmatched 7.1 channel 3D surround sound, designed to enhance your home 3D experience. The Crystal Amplifier Pro delivers the clearest, truest audio signal. And 4 HDMI inputs make it easy to connect all the components of your home theater system, to enjoy the full power of 3D. i bla commodo luptat wis atet wissi. Uscinis num diam zzrilla con henismodit ea ad dit nonulla faciliquisci et autpat. Ut lumsandreet at. Ut am, quis am, sim do commodignibh ea feumsan henis at lorpercing er sequatisisl elit, velessequisi blandre minci blaor amet wisim incidunt lore con ute conse

HW-C770BS

features
Receiver Home Theater System
7.1 channel 120W x 7ch 20Hz-50kHz Crystal Amp Pro Dolby Pro Logic Dolby Digital Plus/Dolby Digital TrueHD/DTS-HD Compatible with iPod (cradle included) Multi-channel input Multi-room Digital amplifier Variable power
Smart volume Auto Sound Calibration (ASC) 3D Surround true HD audio decoder

Connections

4 HDMI input, 1 output

NET DIMENSIONS (WxHxD)

Dimensions: 16.93" x 6.46" x 14.49" Weight: 13.2 lbs

036725617346

HW-C770BS Receiver Home Theater System

Features

7.1 channel Crystal Amp Pro Dolby Pro Logic Dolby Digital Plus/Dolby Digital TrueHD/DTS-HD Compatible with iPod (cradle included) Multi-channel input Multi-room Digital amplifier Variable power

Specifications

120W x 7ch 20Hz-50kHz
net dimensions & weight (wxhxd)
Dimensions: 16.93" x 6.46" x 14.49" Weight: 13.2 lbs

connectivity

4 HDMI input, 1 output
shipping information (wxhxd)
Dimensions: 38.62" x 18.31" x 15.91" Weight: 51.8 lbs
Smart Volume Auto Sound Calibration 3D Surround true HD audio decoder

order code

HW-C770BS/XAA

036725617346

2010 Samsung Electronics America, Inc. All rights reserved Samsung is a registered trademark of Samsung Electronics Co., Ltd. Design and specifications are subject to change without notice. Non-metric weights and measurements are approximate. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. AllShare is a registered trademark of Samsung Electronics Co., Ltd. All other product and brand names are trademarks or registered trademarks of their respective companies.