Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.
Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding.

Dolby Pro Logic llz

Dolby Pro Logic IIz adds front height channels to surround sound, creating a 7.1 playback system for video games, home music, and movies; bringing enhanced spatial effects and enveloping sound.
DTS-ES (Extended Surround)
The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc. Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360degree surround effect. DTS-ES adds an additional rear center surround channel for 6.1 channel sound.

Dolby Digtal EX

Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.

Dolby Digital Plus

Dolby Digital Plus is the next-generation audio technology for all high-denition programming and media.
You can enjoy music les by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock.

Dolby True-HD

Dolby True-HD is Dolbys next-generation lossless technology developed for high-denition disc-based media.
SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing
Provides more realistic surround sound with normal stereo audio sources.

DTS 96/24

DTS 96/24 encodes standard 16 bit/44.1 kHz sound to 24 bit/96kHz and applies it to a 5.1 CH sound track.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
DTS (Digital Theater Systems)
DTS provides a discrete 5.1 CH digital audio signal for both music and movie contents and uses less compression than Dolby Digital for richer sound.

ACCESSORIES

MAIN/ ZONE2

INPUT SELECT TV SOURCE

AMP/TV

BD/DVD

DIMMER

PROLOGIC AUDIO ASSIGN

TUNING / CH

TUNER MEMORY SUB WOOFER

SETUP/MENU

RETURN

BD/DVD SAT TV/AUX1

CD iPod

MULTI CH VCR/AUX2
Remote Control (AH59-02297A)/ Batteries (AAA size) (4301-000116)

FM antenna (AH42-00017A)

If external amplier does not provide the volume control function like Power Amplier, set ZONE2 to "VOL 21
- HW-C900-XAA_0831.indd 21
CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI
HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI(High-Denition Multimedia Interface) interface, you can play back digital video and audio.

DVD or Blu-ray Player

(Cable/Satellite/Set-top box)
Game console or HDTV Tuner
(HDTV Terrestrial Receiver)

Camcorder

Connect it if you want to use Anynet+.

OPTICAL OUT

High-bandwidth Digital Content Protection System (HDCP) support To play digital contents through the HDMI connection, both the connected external device and TV must support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP. Compatibility with a TV Supporting HDMI A TV with an HDMI jack. A TV with a DVI-D jack (TV supporting HDCP) A TV with a DVI-D jack (TV not supporting HDCP) Video/Audio Video -
Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is protected by CPPM, use a player supporting CPPM. The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the performance of the connected device. Since HDMI connection supports both video and audio, you dont have to connect an additional audio cable.
- HW-C900-XAA_0831.indd 22

6:21:54

HDMI FUNCTION

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+. 1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 22) 2. Set the Anynet+ function on your TV. (See the TV instructions manual for more information.) You can operate the volume on the AV receiver by using Volume buttons on the TV remote control. CONNECTIONS

To turn on Anynet+

1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select HDMI SETUP, and then press the ENTER or button. 4. Press the buttons to select HDMI ANYNET+, and then press the ENTER or button. 5. Press the buttons to set ANYNET+ to ON. - To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited.

If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using the TVs remote control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC). function.
Please check your TV for the n logo. If your TV has an n logo, then it supports the Anynet+ When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed).
Otherwise, it can cause a malfunction.
- HW-C900-XAA_0831.indd 23

6:21:57

CONNECTING TO YOUR TV
OPTICAL OUT AUDIO OUT COMPONENT IN VIDEO IN

Video Connection

If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV. OR Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the Video Input jack on your TV.

Audio Connection

Connect the Digital Input (OPTICAL 3) on your AV Receiver to the Digital Output of the TV. OR Connect AUDIO IN (TV) on your AV Receiver to the Audio Out of the TV.
- HW-C900-XAA_0831.indd 24
CONNECTING A DVD OR BD(Blu-ray) PLAYER

COMPONENT IN VIDEO IN

CONNECTIONS

COMPONENT OUT

AUDIO OUT

VIDEO OUT

or Video Connection

DVD or BD Player

Connect a Component video cable(not supplied) from the COMPONENT IN (BD/DVD) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. OR Connect a Video cable from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player.
Connect the Digital Input (OPTICAL 1) on your AV Receiver to the Digital Output of the DVD/BD player. OR Connect AUDIO IN (BD/DVD) on your AV Receiver to the Audio Out of the DVD/BD player.
- HW-C900-XAA_0831.indd 25

6:22:00

CONNECTING A CABLE, SATELLITE OR SET-TOP BOX
SAT(Cable/Satellite/Set-top box)
Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. OR Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video Output jack on your SAT.

Connect the Digital Input (OPTICAL 2) on your AV Receiver to the Digital Output of the SAT. OR Connect AUDIO IN (SAT) on your AV Receiver to the Audio Out of the SAT.
Disconnect the power plug from the outlet if you will not use this unit for a long period of time. the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
If the cable/set-top box has only one audio output jack, connect it to either the right or left audio input jack of
- HW-C900-XAA_0831.indd 26

6:22:02

CONNECTING A VCR

VIDEO IN

AUDIO IN

(For playback)

(For recording)
For playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. For recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VCR.
For playback Connect AUDIO IN (VCR) on your AV Receiver to the Audio Out of the VCR. For recording Connect AUDIO OUT (VCR) on your AV Receiver to the Audio In of the VCR.
Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
- HW-C900-XAA_0831.indd 27

6:22:05

CONNECTING A CD PLAYER

COAXIAL OUT

CD player Audio Connection
Connect the Digital Input (COAXIAL, OPTICAL1~3) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player.
If the CD player has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack. Please see "AUDIO SETUP" at Page.35.
If the CD player has only OPTICAL digital output jack, connect it to OPTICAL 1~3 JACK of the main unit.
- HW-C900-XAA_0831.indd 28

6:22:08

CONNECTING 7.1 CHANNEL DEVICES
You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output.

SURROUND 5.1 CH 7.1 CH

iPod 1st+2nd generation 5GB 10GB 20GB
iPod 3rd generation 10GB 15GB 20GB 30GB 40GB
iPod 4th generation 20GB 40GB
iPod 5th generation(video) 30GB 60GB 80GB
iPod 4th generation (color display) 20GB 30GB 40GB 60GB

iPod mini 4GB 6GB

iPod classic 80GB 120GB 160GB
iPod touch 1st generation 4GB 16GB 32GB
iPod touch 2nd generation 8GB 16GB 32GB
iPhone iPhone 3G iPhone 3GS
"Made for iPod" means that the dock has been designed to connect specically for the iPod and has been certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.
- HW-C900-XAA_0831.indd 31

6:22:18

CONNECTING THE FM ANTENNA
1. Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. 2. Slowly move the antenna wire around until you nd a location where reception is good, then fasten it to a wall or other rigid surface.

FM antenna (supplied)

Do not place the antenna cable close to the power cord. Keep it as far away as possible. If you experience poor FM reception, use an external antenna.
CONNECTING AUX COMPONENTS
You can connect external devices you use for a short time (camcorder, game console, mobile equipment,etc.) to the front of this unit for convenience.
- HW-C900-XAA_0831.indd 32
Basic functions of your AV Receiver
BEFORE USING THE AV RECEIVER

Turning On/Off

Connect the power plug to the outlet. This unit will set to Standby mode. Press the POWER button on the main unit for 2 seconds. This unit will be turned on. You can also turn the unit on/off by pressing the POWER button on the remote control.
BASIC FUNCTIONS OF YOUR AV RECEIVER

Remote control functions

You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control. See pages 62 ~ 64 for more details.

To select a function

Method 1 Press the INPUT SELECT button. Each time you press this button, FM BD/DVD SAT TV VCR CD AUX1 AUX2 7.1 MULTI CH IPOD AUDIO IPOD VIDEO will be selected in turn. Method 2 Press the TUNING/CH, BD/DVD, SAT, TV/AUX1, CD, MULTI CH, VCR/AUX2 or iPod button. You can directly select the desired function.

BASICS OF ZONE2

1. When the ZONE2 speaker is connected properly, turn on the main unit and use MULTI ZONE2 in the front panel or MAIN/ZONE button on the remote control to select ZONE2. 2. Press POWER to turn on the ZONE2 feature, and use INPUT SELECT CONTROL to select a source that you want to output to ZONE2. You can also use the INPUT SELECT on the main unit. The mode function as follows : FM BD/DVD SAT TV VCR CD AUX 1

However, you cannot listen to one FM program in the main zone and a different program in the sub zone. The SETUP menu will be disabled in ZONE2 mode.
- HW-C900-XAA_0831.indd 33

6:22:21

BASICS OF ZONE2 (Continued)
Using the ZONE 2 controls Operation Main On POWER POWER

This Unit

Remote Control Unit

Display & Indicator

Zone 2 Mode MULTI ZONE MAIN/ZONE2

Zone 2 Power On

Function (Turn on ZONE2 to display Z next to the display of the input source.) INPUT SELECT INPUT SELECT
BD/DVD SAT TV/AUX1 CD VCR/AUX2
, , , , DIRECT FUNCTION KEY
Volume (Variable Mode) (Fixed Mode) MASTER VOLUME VOL
Zone 2 Control Off (Zone 2 Mode Main Zone Mode)

MULTI ZONE

MAIN/ZONE2

Zone 2 Power Off

- HW-C900-XAA_0831.indd 34
MULTI ZONE Indicator Function
Tuner Preset Mode Volume Control Tuner Preset Frequency

MO/ST CD iPod

TV/AUX1
In ZONE2 FM mode, you can switch only between the preset channels that you have specied in the main zone. ZONE2 is enabled only for an analog input source; the digital source is not applicable. If you still encounter a failure after
following all these instructions, check if the input source is of the analog type. You cannot listen to one FM program in the main zone and a different program in the sub zone. You can use MUTE on the remote control to mute the output sound of ZONE2. Main Zone : Off, Zone 2 : On It is possible to change into the state of "Main Zone : On, Zone 2 : On" from the state of "Main Zone : Off, Zone 2 : On".

AUDIO SETUP

Selecting a source device and connection jack (Digital Audio In)
Select the external devices you have connected to the receiver. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select AUDIO SETUP, and then press the ENTER or button. 4. Press the buttons to select a desired jack. Devices switch as follows; BD/DVD, SAT, TV, CD - To exit setup mode Press the SETUP/MENU button on the remote control. SETUP OFF appears on the display and Setup Mode is exited.
You can also use the SETUP, ,,.,<, >, ENTER buttons on the front of your AV Receiver.
- HW-C900-XAA_0831.indd 35

6:22:22

SELECTING DIGITAL/(HDMI)/ANALOG
You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit. 1. Press the INPUT SELECT button to select a desired function (BD/DVD, SAT,TV, CD, AUX). See page 33. 2. Press the AUDIO ASSIGN button on the remote control to select the audio input source of the external device you have connected. Each time you press this button, the input mode changes as follows:

VARIABLE SET

VIDEO CONV.

BYPASS

ZONE 2 SETUP

VARIABLE

12-V TRIGGER
T1 OFF T2 OFF BD/DVD SAT BD/DVD SAT
- HW-C900-XAA_0831.indd 40

6:22:26

SETTING THE SPEAKER SIZE
Signal outputs and frequency response from the speaker will be adjusted according to your speaker conguration and whether certain speakers are used or not. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SPK SIZE, and then press the ENTER or button. 4. Press the buttons to select the speaker you want, and then press the ENTER or button. Each time you press the buttons, FRONT CENTER SURR SBACK(DPLllX) FRONTH(DPLllZ) SUBW CROVR will be selected in turn. 5. Press the buttons to set the mode (LARGE, SMALL etc.) for the selected speaker. 6. Repeat steps 3-5 to set the mode for each speaker. - To exit setup mode Press the SETUP/MENU button on the remote control. SETUP OFF appears on the display and Setup Mode is exited. Setting the Speaker SPEAKER FRONT (Front) CENTER (Center) SURR (Surround) SBACK (Surround Back) FRONTH (Front Height) SUBW (Subwoofer) CROVR (Crossover Frequency) Possible Settings LARGE, SMALL LARGE, SMALL, NONE LARGE, SMALL, NONE LARGE, SMALL, NONE LARGE, SMALL YES, NO SMALL SMALL SMALL SMALL SMALL YES Default Setting
60, 80, 100,120, 150, 180, 200(Hz) 100Hz
LARGE : Select when using large speakers. You can listen to full range sound. SMALL : Select this when using small speakers. NONE : Select when no speaker is used. YES (subwoofer) : Select when using the subwoofer speaker. NO (subwoofer) : Select when not using the subwoofer speaker. CROVR : Select the crossover frequency for the best bass response in your speakers.
You can also use the SETUP, ,,., <, >, ENTER buttons on the front of your AV Receiver. When the Front speaker is only set to LARGE, you can select LARGE of other speakers. When the Surround speaker is only set to LARGE, you can select LARGE of SBACK (Surround Back)

speaker.

- HW-C900-XAA_0831.indd 41
CONNECTION SETTING FOR SURROUND BACK
Settings for the surround back speaker differ depending on the connection method and installation site of the speaker to be connected. You must congure the SB SETUP settings according to the connected speaker before you listen to music properly. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SB SETUP, and then press the ENTER or button. 4. Press the to select a proper setting for the surround back speaker. SURR-BACK : Select this if you want to install the surround back speaker in the default settings. With this setting, you can enable the Dolby Pro Logic IIx mode. PLIIz : Select this if you want to install the surround back speaker in the top front corner. With this setting, you can enable the Dolby Pro Logic IIz mode. ZONE2 : Select this if you want to connect the ZONE2-specic speakers (left/right) to the surround back port. With this setting, you can enable the Powered ZONE2 feature. Bi-AMP : Select this if you want to connect the Bi-Amp compliant speaker to the surround back port. With this setting, you can enable the Bi-Amp feature.

Depending on the SB SETUP settings, the surround back speaker or front height speaker menus may not
be activated or may differ in the speaker menu: SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE.
Depending on your setting, you may not use different features simultaneously. If you set SURR-BACK, for
instance, you cannot use the following features: PLIIz, ZONE2 and Bi-AMP.
- HW-C900-XAA_0831.indd 42
SETTING THE SPEAKER LISTENING DISTANCE
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SPK DISTANCE, and then press the ENTER or button. 4. Press the buttons to select the speaker you want, and then press the ENTER or button. Each time you press the buttons, F.L F.R CEN S.L S.R SBL SBR S.W will be selected in turn. 5. Press the buttons to set the Speaker Distance. For the FRONT LEFT, FRONT RIGHT, CENTER, SURR. LEFT, SURR. RIGHT, SURRBACK.LEFT, SURRBACK.RIGHT and SUBWOOFER Speakers, you can set the distance from the speaker to listening position between 1ft ~ 30ft (0.3~9.0m) in intervals of 1ft (0.3m).
- To exit setup mode Press the SETUP/MENU button on the remote control. SETUP OFF appears on the display and Setup Mode is exited. - Setting Speaker Distance Set the distance from the speaker to listening position in intervals of 1ft(0.3m). F.L (front left) : 1ft ~ 30ft F.R (front right) : 1ft ~ 30ft S.L (surround left) : 1ft ~ 30ft S.R (surround right) : 1ft ~ 30ft CEN (center) : 1ft ~ 30ft SW (subwoofer) : 1ft ~ 30ft SBL (surround back left) : 1ft ~ 30ft SBR (surround back right) : 1ft ~ 30ft FHL (front height left) : 1ft ~ 30ft FHR (front height right) : 1ft ~ 30ft
If the listening position is beyond the range of the speaker distance setup, set the speaker distance to the

maximum.

If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height

Speaker (FHL/FHR).

- HW-C900-XAA_0831.indd 43
SETTING THE SPEAKER LEVEL
You can set the balance and level of speakers. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SPK LEVEL, and then press the ENTER or button. 4. Press the buttons to select the speaker you want, and then press the ENTER or button. Each time you press this button, F.L F.R CEN S.L S.R SBL SBR S.W will be selected in turn. 5. Press the buttons to set the Speaker Level mode. You can adjust it from -10 to +10dB in 1 step increments. The sound gets quieter at -10dB and louder at +10dB.

- HW-C900-XAA_0831.indd 50

DRC SETUP

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select DRC SETUP, and then press the ENTER or button. 4. Press the buttons to set the DRC Setup mode you want. AUTO : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack. MAX : Sets DRC effect to maximum. STD : Sets DRC effect to standard. MIN : Sets DRC effect to minimum. SETUP

DUAL MONO SETUP

Dual mono programs have two independent mono channels. You can use this function when dual mono programs are played. When you use this function, select audio channels CH1, CH2 or both Channel. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select DUAL MONO, and then press the ENTER or button. 4. Press the buttons to select the DUAL MONO option you want. CH1 : Channel 1 is heard only. CH2 : Channel 2 is heard only. CH1CH2 : Both channels are heard from front speakers.
- HW-C900-XAA_0831.indd 51

6:22:28

Use this if you want to receive audio from HDMI connected external devices. 1. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select HDMI SETUP, and then press the ENTER or button. 4. Press the buttons to select the option you want, and then press the ENTER or button. 5. Press the buttons to set the HDMI Setup mode you want. HDMI SYNC : ON, OFF The AV receiver can be set to automatically correct any delay between the video and the audio, based on the data from the connected TV. - ON : HDMI Sync is enabled. - OFF : HDMI Sync is disabled. HDMI AUDIO : AVR(Audio Video Receiver), TV This preference determines whether audio received at the HDMI IN is output by the HDMI OUT. If you want to listen to audio from an HDMI connected external device through your HDMI connected TV's speakers, set it to TV. Otherwise, leave it on AVR to listen to audio from the A/V receiver. - AVR : HDMI audio is not output - TV : HDMI audio is output HDMI ANYNET+ : ON, OFF Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. - ON : Anynet+ is enabled. - OFF : Anynet+ is disabled. TV ARC : AUTO , OFF If you use the HDMI cable to connect between HDMI IN of an Audio Return Channel-compliant TV and HDMI OUT (ARC) of the main unit, you can listen to the TV sound through the main unit connected speaker without the further connection. - AUTO : The audio signal from the TV can be sent to the HDMI OUT of the main unit. - OFF : Turn TV ARC funtion off.

Selecting the SFE mode

1. Press the AUDIO EFFECT button to select SFE. Each time you press this button, DPLIIX NEO:6 SFE will be selected in turn.
2. Press the UP/DOWN ( ,,. ) button. Each time you press the UP/DOWN ( ,,. ) button, STEREO HALL 1 HALL 2 J.CLUB CHURCH ROCK CLASSIC LIVE GAME MOVIE CONCERT STADIUM will be selected in turn. You can also select the SFE mode by pressing the DSP button on the remote control.
You cannot use Dolby Pro Logic llx mode for Analog multi channel signals, LPCM multi channel signals from HDMI, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio.
Pro Logic works with the audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
Using the S.DIRECT button on the front of the main unit
Output the original signal as it is without applying the sound eld effect or any other sound effect.
Press the S.DIRECT button.
The screen will display DIRECT instead of S.DIRECT.
- HW-C900-XAA_0831.indd 55
USING THE SURROUND MODES (Continued)
Input Signal and Surround Chart o = active, = inactive
Input Signal Dolby Digital Surround Mode L/R O O O O O O O O O O O O O O O O O O O O O O O O O O O C Output Channel Display Information SL SBL SUBW Signal Format Channel Status SR SBR Digital + Dolby Digital L, C, R, SL, SR ,SBL, SW O O O Digital +Dolby Digital EX L, C, R, SL, SR ,SBL, SBR, SW O O O O Digital + Dolby Digital + ProLogic IIx L, C, R, SL, SR ,SBL, SBR, SW O O O O Digital + Dolby Digital + ProLogic Iiz L, C, R, SL, SR, H, SW O O O (Height) O Digital + Dolby Digital Plus L, C, R, SL, SR ,SBL, SBR, SW O O O O Dolby TrueHD L, C, R, SL, SR ,SBL, SBR, SW O O O O DTS L, C, R, SL, SR ,SBL, SW O O O DTS + ProLogic IIx L, C, R, SL, SR ,SBL, SBR, SW O O O O DTS + ProLogic Iiz L, C, R, SL, SR ,SBL, SBR, SW O O O (Height) O DTS ES L, C, R, SL, SR ,SBL, SBR, SW O O O O DTS 96/24 L, C, R, SL, SR ,SBL, SW O O O DTS-HD MSTR L, C, R, SL, SR ,SBL, SBR, SW O O O O DTS-HD L, C, R, SL, SR, SBL, SBR, SW O O O O Digtal + LPCM L, C, R, SL, SR, SBL, SBR, SW O O O O Digtal + LPCM L, C, R, SL, SR, H, SW O O O (Height) O Digtal + LPCM L, R, SW O Digtal + LPCM + Dolby Digital + L, C, R, SL, SR ,SBL, SBR, SW O O O O ProLogic IIx Digtal + LPCM + Dolby Digital + L, C, R, SL, SR, H, SW O O O (Height) O ProLogic Iiz Digtal + LPCM + DTS + NEO:6 L, C, R, SL, SR ,SBL, SBR, SW O O O O Digital + LPCM + LIVE SURR L, C, R, SL, SR ,SBL, SBR, SW O O O O Analog L, C, R, SL, SR ,SBL, SBR, SW O O O O Analog L, C, R, SL, SR, H, SW O O O (Height) O Analog L, R, SW O Analog + Dolby Digital + ProLogic IIx L, C, R, SL, SR ,SBL, SBR, SW O O O O Analog + Dolby Digital + ProLogic Iiz L, C, R, SL, SR, H, SW O O O (Height) O Analog + DTS NEO:6 L, C, R, SL, SR ,SBL, SBR, SW O O O O Analog + LIVE SURR L, C, R, SL, SR ,SBL, SBR, SW O O O O

To play the next le, select a le to play in the list screen of the iPod player.
No other screen than the playback one will appear on the TV screen. Check other screens on

the iPod player.

- HW-C900-XAA_0831.indd 59

CONVENIENT FUNCTIONS

Sleep timer function
You can set the time that this unit will shut itself off. Press the SLEEP button. SLEEP : OFF selected in turn.

120 MIN will be

To check sleep timer Press the SLEEP button. The remaining time before this unit will shut itself off is shown on the display. Pressing the button again changes the sleep time from what you set previously. To cancel sleep timer Press the SLEEP button until SLEEP OFF appears on the display.

Mute function

This function is useful when answering a doorbell or telephone call. Press the MUTE button. MUTE appears on the display.
To output sound again Press the MUTE button again or press the Volume button. MUTE will disappear and sound will output.

Adjust the display

You can adjust the brightness of the display. Press the DIMMER button. Each time you press this button, the brightness changes as follows : Dark Bright.
SLEEP, Mute and the Adjust Display functions can only be operated with the remote control.
- HW-C900-XAA_0831.indd 60

6:22:31

Reset function
When the Power is on, 1. Press the MUTE button. MUTE appears on the display. 2. Press the 2 button ve times and then press the ENTER button. INITIAL : NO appears on the display. 3. Press the buttons to select YES. The unit will turn off after 5 seconds. When the Power is Off, 1. Press and hold the MEMORY button on the front of your AV Receiver for longer than 5 seconds. POWER LED will blink one time.

RETURN EXIT

NEO:6 SLEEP DIMMER
Using the RESET function will erase all stored settings.
Do not use this unless necessary.

Using headphones

Use headphones (not supplied) for private listening pleasure. Connect the headphones to the headphone (PHONES) jack and listen to music.
Do not turn the volume up too high when you use headphones as it may damage your hearing.

There is no sound from surround back speakers
Are the surround back speakers connected properly? Is SBACK (Surround Back) set to NONE in the Speaker Size? Is Surround Mode set to EX/ES?

Can't select EX/ES mode.

Is SBACK (Surround Back) set to NONE in the Speaker Size? Is the input signal selected properly?
- HW-C900-XAA_0831.indd 65
Symptom Can't select Dolby Pro Logic llx mode. Check Is the input signal selected properly? Remedy Only 2 channel signal can select Dolby Pro Logic IIx mode. (ex:Dolby Digital, PCM, 2 channel analog input signal.) Use PCM and Analog input signal. Check whether the DVD player is properly connected and refer to page 36 to select the digital input.
Can't select NEO:6 mode. There is no sound when playing a DTS encoded DVD.
Is the input signal selected properly? Is Digital input selected?
Product protection function

Heat protection

The protection function will come on if the main unit or power transformer overheats.

"

" will appear in the display.
This function will come on : - If speaker terminal is shorted - If speaker cable is shorted If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the display and the unit will work properly.
If PROTECTION appears on the display, check whether the speaker terminal is shorted and then turn on the unit again.

ASC Error List

Error No. E01 E02 E03 E04 E05 E07 E08 E13 E14 VFD Message HP CONCT NO MIC NOISY MIC LEVL NO FRONT LEVL OVR DIST OVR TIME OVR CODE ERR Disconnect the headphones. Connect the microphone. Take an appropriate action to reduce the surrounding noise. The speaker is too close to the microphone. Check the distance between speaker and microphone. Check if the front speaker is connected properly. Check the position of each of speaker and microphone. The distance between speaker and microphone exceeds the acceptable value. Check the location of microphone and each speaker. Unplug the power cable and plug it back. Then, perform ASC again. Unplug the power cable and plug it back. Then, perform ASC again. Action
- HW-C900-XAA_0831.indd 66

Appendix

SPECIFICATIONS
Power supply Standby power consumption Power consumption GENERAL Weight Dimensions (W x H x D) Operating temperature range Operating humidity range Frequency response Usable sensitivity FM TUNER S/N ratio Distortion Stereo separation Rated output Front speaker (left+right) Center speaker AMPLIFIER Surround speaker (left+right) Surround back speaker (left+right) Input sensitivity/impedance S/N ratio (analog input) Separation (1kHz) FREQUENCY RESPONSE HDMI Analog input Digital input/96kHz PCM Input Output TV format Input level/impedance VIDEO OUTPUT Output level/impedance Video frequency response S/N Ratio 120V, 60 Hz 0.9W 75W 12.3 Ibs 17 x 6.5 x 14.2 inches 41F~+95F 10%~75% 87.5~108.0MHz 12dBf MONO/STEREO 55/55dB MONO/STEREO 0.3/0.8% 30dB 20Hz~20kHz/THD = 0.9% 6 120W/CH 6 120W/CH 6 120W/CH 6 120W/CH 450mV/47k 80dB 60dB 20Hz~20kHz(3dB) 20Hz ~44kHz(3dB) Compatible 1080p Compatible 1080p NTSC/PAL 1Vp-p/75 1Vp-p/75 5Hz to 10kHz(-3dB) 60dB

Czech Denmark Finland France Germany Hungary Italia Luxemburg Netherlands Norway Poland Portugal Slovakia Spain Sweden U.K Eire
603 www.samsung.com 0800 SAMSUNG (786) www.samsung.com 400-810-5858 China www.samsung.com 010-www.samsung.com/ hk Hong Kong (852) 3698-4698 www.samsung.com/ hk_en/ India www.samsung.com 0800-112-8888 Indonesia www.samsung.com 021-5699-7777 Japan 0120-327-527 www.samsung.com Malaysia 1800-88-9999 www.samsung.com 1-800-10-SAMSUNG (726-7864) 1-800-3-SAMSUNG Philippines (726-7864) www.samsung.com 1-800-8-SAMSUNG (726-7864) 02-5805777 Singapore 1800-SAMSUNG (726-7864) www.samsung.com 1800-29-3232 www.samsung.com Thailand 02-689-3232 Taiwan 0800-329-999 www.samsung.com Vietnam www.samsung.com ` Middle East & Africa Turkey 11 www.samsung.com South Africa 0860-SAMSUNG (726-7864) www.samsung.com U.A.E 800-SAMSUNG (726-7864) www.samsung.com Bahrain 8000-4726 Jordan 800-22273
- HW-C900-XAA_0831.indd 69

QUESTIONS OR COMMENTS?

COUNTRY IN THE US CALL 1-800-SAMSUNG (7267864) OR VISIT US ONLINE AT www.samsung.com/us WRITE Samsung Electronics America, Inc. 105 Challenger Road Ridgeeld Park, NJ 07660-0511

Code No. AH68-02312R

- HW-C900-XAA_0831.indd 70

HW-C700 HW-C700B HW-C770S HW-C770BS

AV Receiver System

user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at

www.samsung.com/register

HW-C700-C770S-C770BS-XAA_0305.in1 1

2010-03-17

1:30:12

Safety information

SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
WARNING To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture. To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with the installation instructions. CAUTION Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus. The Mains plug is used as a disconnect device and shall stay readily operable at any time. This product satises FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution : FCC regulations state that any unauthorized changes or modications to this equipment may void the user's authority to operate it.
HW-C700-C770S-C770BS-XAA_0305.in2 2

1:30:18

IMPORTANT SAFETY INSTRUCTIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment. This equipment should be installed and operated with minimum distance 7.9 inches between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian Department of Communications Radio Interference Regulations This digital apparatus (Wireless Internet Radio) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) 2) 3) 4) 5) 6) 7) 8) 9) Read these instructions. Keep these Instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachment/accessories specied by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

10) 11) 12)

13) 14)
HW-C700-C770S-C770BS-XAA_0305.in3 3

PRECAUTIONS

2.7 inches

3.9 inches

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely from the power supply, remove the AC plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.

Phones

Protect the player from moisture(i.e. vases), and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers.). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc have been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.
HW-C700-C770S-C770BS-XAA_0305.in4 4

Features

Digital AV Receiver
This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss.
DTS-HD (Master Audio, High Resolution) (Digital Theater Systems - High Denition)
DTS-HD Audio provides the highest quality multi-channel sound possible. It delivers sound quality that matches the clear and vivid images of high-denition video.

Dolby Pro Logic llx

Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.

ACCESSORIES

INPUT SELECT TV SOURCE AMP/TV DIMMER BD/DVD

NEO : 6

PROLOGIC

AUDIO ASSIGN

TUNING /CH

TUNER MEMORY

SUBWOOFER

SETUP/MENU

RETURN

BD/DVD

MULTI CH

VCR / AUX

Remote Control (AH59-02307A)/ Batteries (AAA size) (4301-000116)

FM antenna (AH42-00017A)

Users manual (AH68-02260R)

iPod Dock (AH96-00051A)

ASC microphone ( AH30-00099A )
HW-C700-C770S-C770BS-XAA_0305.in5 5

1:30:22

Contents

SAFETY INFORMATION

FEATURES
Safety Warnings Important Safety Instructions Precautions

Accessories

DESCRIPTION

CONNECTIONS

Front Panel Rear Panel Display Insert Remote Control Batteries Operation Range of the Remote Control Tour of the Remote Control
Speaker Positioning Connecting the Speakers Connecting External Devices/Your TV via HDMI HDMI Function Connecting to your TV Connecting a DVD or BD(Blu-ray) Player Connecting a Cable, Satellite or Set-top Box Connecting a VCR Connecting a CD Player Connecting 7.1 Channel Devices Connecting an iPod Connecting the FM Antenna Connecting Aux Components
BASIC FUNCTIONS OF YOUR AV RECEIVER
Before Using the AV Receiver Audio Setup Selecting Digital/Analog Input
HW-C700-C770S-C770BS-XAA_0305.in6 6
Setup Menu Tree Setting the Speaker Size Setting the Speaker Listening Distance Setting the Speaker Level Setting the Test Tone Setting Dolby Pro Logic Mode Setting Dolby Pro Logic IIx Setting Dolby Pro Logic IIz Setting Tone Control Setting NEO:6 Mode Setting EX/ES Mode AV SYNC MP3 Enhancer Smart Volume ASC (Auto Sound Calibration) Setup DRC Setup HDMI Setup Variable Set Using the Surround Modes Using the Subwoofer Selection Button Listening to the Radio Using an iPod Convenient Functions Software Upgrade Operating Your TV With the Remote Control Operating your DVD or BD player with the remote control

CONTENTS

OPERATION

MISCELLANEOUS

TROUBLESHOOTING

Troubleshooting

APPENDIX

Turns the receiver on/off. Used to select the AMP/TV mode. - If you select the AMP mode, the button will ash orange. - If you select the TV mode, the button will ash green. Used to select a TV channel. Select the desired NEO:6 mode. Select the desired Dolby Pro Logic audio mode. Press to skip backwards or forwards on a connected DVD/BD player or iPod. Press to stop/start playback on a connected DVD/BD player or iPod. Mutes the sound of a connected device. Adjusts the volume of the selected device. Used to select the Subwoofer. Used to set a preset radio frequency. Displays the SETUP menu. Used to navigate the menus. Used to return to the previous menu from the SETUP menu. Used to select an input source. Toggles to nd and select an input source. Press to select a connected TV's video source. Adjusts the brightness of the display. Used to select the BD/DVD mode. - If you select the BD mode, the button will ash orange. - If you select the DVD mode, the button will ash green. Used to set the Sleep Timer. Toggles to select an input mode for the selected source. Used to select the SFE mode. Press to search backwards or forwards. Pauses playback on a connected device. Used to change the radio broadcasting frequency or TV channel. Used to set the Auto Sound Calibration function. Select MONO or STEREO for radio broadcasts. Display information on the connected device currently being used. Used to select an item in the SETUP menu. Exits the SETUP menu.
HW-C700-C770S-C770BS-XAA_0305.in15 15

Connections

This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

SPEAKER POSITIONING

There are two methods for positioning the speakers. When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT Jack. * Speakers are provided with model HW-C770S/HW-C770BS only. Model HW-C700/C700B does not come with speakers.

FHL FHR

6.6~9.8 feet (2~3m)

AV RECEIVER AV RECEIVER

L, R, C, SW, SL, SR, SBL, SBR ( Dolby Pro Logic IIx )
L, R, C, SW, SL, SR, FHL, FHR( Dolby Pro Logic IIz)

Position of AV Receiver

Place the AV Receiver on a dedicated stand or rack.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.
Subwoofer function (HW-C770S/C770BS only)
Active subwoofer with integrated 150W amplier provides rich bass sound. Connect the SW OUT terminal of the amplier to the INPUT terminal of the subwoofer speaker. Press the POWER button on the rear side of the subwoofer to turn the power on. Using the subwoofers VOLUME control, you can set the desired bass level (See page 38 "Setting the speaker level" to set the subwoofer level in the menu).

SYNC ON AUDIO AVR ANYNET+ ON OFF TV OFF

VARIABLE SET

HW-C700-C770S-C770BS-XAA_0305.in35 35

SETTING THE SPEAKER SIZE

Signal outputs and frequency response from the speaker will be adjusted according to your speaker conguration and whether certain speakers are used or not. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SPK SIZE, and then press the ENTER or button. 4. Press the buttons to select the speaker you want, and then press the ENTER or button. Each time you press the buttons, FRONT CENTER SURR SBACK FRONTH SUBW CROVR will be selected in turn. 5. Press the buttons to set the mode (LARGE, SMALL etc.) for the selected speaker. 6. Repeat steps 3-5 to set the mode for each speaker. - To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited. Setting the Speaker SPEAKER FRONT (Front) CENTER (Center) SURR (Surround) SBACK (Surround Back) FRONTH (Front Height) SUBW (Subwoofer) CROVR (Crossover Frequency) Possible Settings LARGE, SMALL LARGE, SMALL, NONE LARGE, SMALL, NONE LARGE, SMALL, NONE LARGE, SMALL, NONE YES, NO SMALL SMALL SMALL SMALL NONE YES Default Setting
60, 80, 100,120, 150, 180, 200(Hz) 100Hz
LARGE : Select when using large speakers. You can listen to full range sound. SMALL : Select this when using small speakers. NONE : Select when no speaker is used. YES (subwoofer) : Select when using the subwoofer speaker. NO (subwoofer) : Select when not using the subwoofer speaker. CROVR : Select the crossover frequency for the best bass response in your room.
You can also use the SETUP, ,,., <, >, ENTER buttons on the front of your AV Receiver. When the Front speaker is only set to LARGE, you can select LARGE of other speakers. When the Surround speaker is only set to LARGE, you can select LARGE of SBACK (Surround Back)

speaker.

HW-C700-C770S-C770BS-XAA_0305.in36 36
SETTING THE SPEAKER LISTENING DISTANCE
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SPK DISTANCE, and then press the ENTER or button. 4. Press the buttons to select the speaker you want, and then press the ENTER or button. Each time you press the buttons, F.L F.R CEN S.L S.R SBL SBR S.W will be selected in turn. 5. Press the buttons to set the Speaker Distance. For the FRONT LEFT, FRONT RIGHT, CENTER, SURR. LEFT, SURR. RIGHT, SURRBACK.LEFT, SURRBACK.RIGHT and SUBWOOFER Speakers, you can set the distance from the speaker to listening position between 1ft ~ 30ft (0.3~9.0m) in intervals of 1ft (0.3m). SETUP

- To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited. - Setting Speaker Distance Set the distance from the speaker to listening position in intervals of 1ft(0.3m). F.L (front left) : 1ft ~ 30ft F.R (front right) : 1ft ~ 30ft S.L (surround left) : 1ft ~ 30ft S.R (surround right) : 1ft ~ 30ft CEN (center) : 1ft ~ 30ft SW (subwoofer) : 1ft ~ 30ft SBL (surround back left) : 1ft ~ 30ft SBR (surround back right) : 1ft ~ 30ft FHL (front height left) : 1ft ~ 30ft FHR (front height right) : 1ft ~ 30ft
If the listening position is beyond the range of the speaker distance setup, set the speaker distance to the

maximum.

The distance range of the overall speaker system is determined based on the F.L (front left) speaker
distance from the listening position.
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height

Speaker (FHL/FHR).

HW-C700-C770S-C770BS-XAA_0305.in37 37
SETTING THE SPEAKER LEVEL
You can set the balance and level of speakers. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select SPK LEVEL, and then press the ENTER or button. 4. Press the buttons to select the speaker you want, and then press the ENTER or button. Each time you press this button, F.L F.R CEN S.L S.R SBL SBR S.W will be selected in turn. 5. Press the buttons to set the Speaker Level mode. You can adjust it from -10 to +10dB in 1 step increments. The sound gets quieter at -10dB and louder at +10dB.
- To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited. - Setting Speaker Level F.L (front left) : -10 ~ +10dB F.R (front right) : -10 ~ +10dB S.L (surround left) : -10 ~ +10dB S.R (surround right) : -10 ~ +10dB CEN (center) : -10 ~ +10dB SW (subwoofer) : -10 ~ +10dB SBL (surround back left) : -10 ~ +10dB SBR (surround back right) : -10 ~ +10dB FHL (front height left) : -10 ~ +10dB FHR (front height right) : -10 ~ +10dB

HW-C700-C770S-C770BS-XAA_0305.in38 38

1:31:19

SETTING THE TEST TONE
Use the test tone to check the speaker connection status or level. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select TEST TONE, and then press the ENTER or button. 4. Press the buttons to select the option you want, and then press the ENTER or button. AUTO : Test signal will be automatically output as follows; F.L CEN S.W F.R S.R SBR SBL S.L. - During test tone output, press the buttons to adjust the speaker output level from -10 to +10 dB by 1 step. MANUAL : Enables you to adjust the output level of the speaker manually. 1) Press the ENTER button to select the speaker you want. Each time you press the ENTER button, F.L CEN S.W S.R SBR SBL S.L will be selected in turn. F.R
2) Press the buttons to set the Test Tone mode you want. You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. - Test Tone Output F.L (front left) : -10 ~ +10dB F.R (front right) : -10 ~ +10dB S L (surround left) : -10 ~ +10dB S.R (surround right) : -10 ~ +10dB - To stop test tone Press the SETUP/MENU button once. SETUP OFF appears on the display and test tone stops. CEN (center) : -10 ~ +10dB S.W (subwoofer) : -10 ~ +10dB SBL (surround back left) : -10 ~ +10dB SBR (surround back right) : -10 ~ +10dB
In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L

S.W FHR F.R S.R.

HW-C700-C770S-C770BS-XAA_0305.in39 39
SETTING DOLBY PRO LOGIC MODE
This mode provides 7.1 channel sound from 2 channel sources. Press the PROLOGIC button on the remote control. MOVIE : Adds realism to the movie soundtrack. MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo sources. GAME : Enhances the excitement of the games sound. MATRIX : You will hear 7.1 channel surround sound. PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.
SETTING DOLBY PRO LOGIC IIx
This function works only in Dolby Pro Logic IIx MUSIC mode. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select DPLIIX SETUP, and then press the ENTER or button. 4. Press the buttons to select the option you want, and then press the ENTER or button. PANORAMA : You can set it ON or OFF. (This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.) DIMENSION : You can set from -7 to +7. (Incrementally adjusts the sound eld (DSP)from the front or surround.) C- WIDTH : You can set from 0 to 7. (This sets the width of the center sound image. The higher the setting, the less sound comes from the center speaker.)

HW-C700-C770S-C770BS-XAA_0305.in41 41

1:31:20

SETTING NEO:6 MODE
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select NEO:6 SETUP, and then press the ENTER or button. 4. Press the buttons to set the C-IMAGE mode you want. You can set C-IMAGE from 0 to 5 This parameter adjusts the height of the center image through the front and center speakers. 0 is the lowest while 5 is the highest. - To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited.
NEO:6 mode cannot be used with Dolby Digital, Dolly Digital +, Dolby true HD, DTS, DTS-HD Master Audio. Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
HW-C700-C770S-C770BS-XAA_0305.in42 42

SETTING EX/ES MODE

When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select EX/ES SETUP, and then press the ENTER or button. 4. Press the buttons to set the EX/ES mode you want. AUTO : If the unit receives an audio signal that it can recognize, it will select an optimal decoder for playback in 6.1/7.1 channels. If the amplier does not recognize the audio signal, it will not play in 6.1/7.1 channel automatically. ON : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using Dolby Digital Surround EX / DTS ES decoder. OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback. - To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited. SETUP

HW-C700-C770S-C770BS-XAA_0305.in47 47
USING THE SURROUND MODES (Continued)
Surround Mode and Input Signal Chart o = active, = inactive
Surround Mode Input Signal Dolby D Surr. EX Dolby D (5.1ch) Dolby D Surr.EX Dolby D(5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analog L.PCM (Audio) Analog Dolby D (2ch) Dolby D (2ch Surr) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analog Dolby D Surr. EX Dolby D (5.1ch) DTS-ES DTS (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) L.PCM 96KHz Analog True-HD Dolby Digital + Master Audio High Resolution Decoding Dolby Digital 5.1 Dolby Digital 5.1 Pro Logic IIz Pro Logic IIz Pro Logic IIx(z) Pro Logic IIx(z) Pro Logic IIx(z) Pro Logic IIx(z) Neo:6 Neo:6 Neo:6 Neo:6 DD+SFE DD+SFE SFE SFE Dolby Digital EX Dolby Digital EX DTS-ES DTS-ES Stereo Stereo Stereo Stereo Stereo True-HD Dolby Digital + Master Audio High Resolution L/R O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Output Channel Display Information SL SBL Display Signal Channel Status C SUBW SR SBR Format DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SW O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O L.PCM L, C, R, SL, SR, SBL, SBR, SW O O O O Analog L, C, R, SL, SR, SBL, SBR, SW O O O O L.PCM L, C, R, SL, SR, SBL, SBR, SW O O O O Analog L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O L.PCM L, C, R, SL, SR, SBL, SBR, SW O O O Analog L, C, R, SL, SR, SBL, SBR, SW O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW O O O O dts, ES L, C, R, SL, SR, SBL, SBR, SW O O O O dts L, C, R, SL, SR, SBL, SBR, SW O O O O DIGITAL L, R, SW O DIGITAL L, R, SW O L.PCM L, R, SW O L.PCM L, R, SW O Analog L, R, SW O True-HD L, C, R, SL, SR, SBL, SBR, SW O O O O Dolby L, C, R, SL, SR, SBL, SBR, SW O O O O Digital + DTS-HD L, C, R, SL, SR, SBL, SBR, SW O O O O DTS-HD L, C, R, SL, SR, SBL, SBR, SW O O O O

STEREO

True-HD Dolby Digital + DTS-HD
L/R : front speaker (left/right) C : center speaker SL/SR : surround speaker (left/right) SBL/SBR : surround back speaker (left/right) SW : subwoofer
Channel status displays are dependent on the speaker conguration.
SFE mode works with 2-ch signals. If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front Height

USING AN iPod

You can enjoy playback of your iPod using the supplied remote control.
Listening to Music (iPod audio function)
You can play music les stored in the iPod player by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV Receiver. 2. Place the iPod in the dock. Your iPod is automatically turned on. 3. Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode. 4. Press the PLAY button on the remote control to play. The AV receiver starts playing from the rst track of the iPod player. 5. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons.
See page 28 for compatible iPods. Compatibility depends on the software version of your iPod. You can also select iPod by pressing the iPod button on the remote control.
HW-C700-C770S-C770BS-XAA_0305.in50 50
USING AN iPod (Continued)
Watching a Movie (iPod Video function)
You can play video les stored in the iPod player on a TV by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV receiver. 2. In the iPod screen, move to Videos > Settings and set the TV Out option to On. 3. Place the iPod in the dock. 4. Press the INPUT SELECT button on the remote control to select IPOD VIDEO mode. 5. Set the AV IN option of the TV connected to the AV receiver to COMPOSITE. Follow the iPod onscreen guide through the following steps. 6. Press the , buttons on the remote control to select Videos and press the ENTER button. 7. Press the , buttons on the remote control to select Movies and press the ENTER button. 8. Press the , buttons to select the le to play and press the ENTER button. The iPod's video les will be played on the TV screen. 9. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons. If you press the PREV button within 3 seconds after the playback, the player will stop playing and return to the list screen. If you press the PREV button 3 seconds or later after the playback, the player will move to the start screen of the current le. Press the STOP button to stop playing and return to the list screen. Press the RETURN button to return to the previous menu. OPERATION

<iPod Screen>

You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video. Compatibility depends on the software version of your iPod.
See page 28 for compatible iPods. When the current le is played to the end, the next le will not be played automatically.
To play the next le, select a le to play in the list screen of the iPod player.
No other screen than the playback one will appear on the TV screen. Check other screens on

the iPod player.

HW-C700-C770S-C770BS-XAA_0305.in51 51

CONVENIENT FUNCTIONS

on the back of the main unit.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off automatically after completing the rmware upgrade. When software is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
If you failed software upgrade, it is strongly recommended whole USB data
format to FAT16 and retry software upgrade.
The NTFS USB File System can not be supported. Depending on the manufacturer, the USB may not be supported. 53
HW-C700-C770S-C770BS-XAA_0305.in53 53

1:31:26

Miscellaneous
OPERATING YOUR TV WITH THE REMOTE CONTROL
1. Press the POWER button to turn on the TV. 2. Press the AMP/TV button to set the remote to TV mode. 3. Point the remote control toward the TV. 4. While holding down the POWER button, enter the code corresponding to your brand of TV. If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. If the code matches the TV's code, the TV will be turned off. 5. If TV is turned on or off when you press the POWER button of the remote control, the setting is completed. You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9).
The remote control may not work on some brands of TVs. Also, some operations may not be possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
HW-C700-C770S-C770BS-XAA_0305.in54 54

1:31:28

OPERATING YOUR TV WITH THE REMOTE CONTROL (Continued)

TV Brand Code List

Admiral (M.Wards) A Mark Anam

Code Number

056, 057, 058 001, 015 001, 002, 003, 004,005, 006, 007, 008, 009, 010, 011, 012, 013, 014 001, 018, 040, 048 057, 058, 081 059, 003 003, 018, 003, 005, 061, 082, 083, 003 059, 061, 002, 003, 004, 015,016, 017, 018, 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 032, 034, 035, 036, 040, 048, 059, 090, 099, 003 003, 015, 040, 046, 059, 061, 064, 082, 083, 084, 085 019, 065, 003 006, 040, 056, 059, 066, 067, 015, 018, 050, 059, 056, 059, 067, 059, 061, 087, 088 003, 015, 001, 015, 016, 017, 037, 038, 039, 040, 041, 042, 043, 044, 054, 086
Luxman LXI (Sears) Magnavox Marantz Matsui MGA Mitsubishi/MGA MTC NEC Nikei Onking Onwa Panasonic Penney Philco Philips
018 019, 054, 056, 059, 060, 062, 063, 065, 071 015, 017, 018, 048, 054, 059, 060, 062, 072, 089 040, 018, 040 018, 040, 054, 059, 060, 075, 018, 019, 020, 040, 059, 006, 007, 008, 009, 054, 066, 067, 073, 003, 015, 017, 018, 048, 054, 059, 062, 069, 090 015, 017, 018, 040, 048 054, 062, 072, 112, 114, 117, 118 063, 066, 080, 091 015, 018, 006, 066, 067 017, 048, 056, 060, 061, 075 018, 059, 067, 076, 077, 078, 092, 093, 094 003, 000, 015, 016, 017, 040, 043, 046, 047, 048, 049, 054, 059, 060, 098 019, 061, 065, 101, 102, 103, 104 003, 040, 060, 061 015, 018, 019 015, 057, 064, 101, 105, 106, 115 057, 058 050, 051, 052, 053, 055, 101 003, 018

Sylvania Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech Videch Wards Yamaha York Yupiteru Zenith Zonda Dongyang LOWE FINLUX YOKO LOEWE OPTA PHONOLA RADIOLA SCHNEIDER AKAI GRUNDIG BLAUPUNKT SIEMENS CGE IMPERIAL MIVAR SABA BANG&OLUFSEN BRIONVEGA FORMENTI METZ WEGA RADIOMARELLI SINGER SINUDYNE TELEFUNKEN
018, 040, 048, 054, 059, 060, 062 061, 095, 018 003, 015, 018, 025 018, 040 019, 057, 063, 071, 101 107, 109, 110, 111, 059, 060, 069 015, 017, 018, 040, 048, 054, 060, 058, 003, 054, 109, 054, 114 054, 112, 114 054, 103 108, 109, 113, 119, 120, 114 116

MISCELLANEOUS

AOC Bell & Howell (M.Wards) Brocsonic Candle Cetronic Citizen CINEMA Classic Concerto Contec Coronado Craig Croslex Crown CURTIS MATHES CXC Daewoo
Pioneer Portland Proton QUASAR Radio Shack RCA/Proscan Realistic Sampo Samsung

Daytron Dynasty Emerson

Fisher Funai Futuretech General Electric (GE) Hall Mark Hitachi Inkel JC Penny JVC KTV KEC KMC LG (Goldstar)
Sanyo Scott Sears Sharp Signature 2000 (M.Wards) Sony Soundesign Spectricon SSS
HW-C700-C770S-C770BS-XAA_0305.in55 55
OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL
1. Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works. If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off. 5. If DVD (BD) is turned on or off when you press the POWER button of the remote controller, the setting is completed. You can use DVD (BD) POWER, PLAY, PAUSE, STOP, SKIP, MENU and Numeric buttons (0~9).
The remote control may not work on some brands of DVD. Also, some operations may not be possible depending on your brand of DVD.
The remote control will work with Samsung DVD (BD) by default.

DVD Brand Code List

DENON DOONOON DMTECH FISHER GE HARMAN/KARDON JVC KENWOOD LG MAGNAVOX MITSUBISHI

003, 010, 005, 016

ONKYO OPTIMUS PANASONIC PROSCAN PHILIPS PIONEER RCA SAMSUNG SANYO SONY THETA DIGITAL
004, 004, 023 007, 011, 022, 000, 015, 020 011
TOSHIBA YAMAHA ZENITH TAEGWANG PS2 X-BOX APEX Marantz
004, 018 009, 033 004, 030 031
BD player Brand Code List
SAMSUNG 000, 001, 002, 003, 004
The remote control will control Samsung BD players only.
HW-C700-C770S-C770BS-XAA_0305.in56 56

1:31:29

Before requesting service, please check the following. Symptom The unit will not turn on. Check Is the power cord plugged into the outlet? Is there static electricity in the air? Remedy Connect the power plug to the outlet.

TROUBLESHOOTING

A function does not work when the button is pressed. Sound is not produced.
Disconnect the power plug and connect it again. Connect them correctly. Press the MUTE button to cancel the function. Adjust the volume. Refer to pages 36 to select LARGE, SMALL or YES. Connect it correctly.
Are the speakers and external components connected properly? Is the Mute function on? Is the volume set to minimum? Is the Speaker Size set incorrectly to NONE?
Picture does not appear on a TV when the function is selected. Remote controller does not work.
Is the external component connected properly?
Are the batteries drained? Is the distance between remote control and main unit too great? Are the left/right speaker or left/right input/output cables connected properly? Is FM antenna connected properly?
Replace with new batteries. Operate at close distance.
The sound from the left/right channels is reversed.
Check the left/right channel and connect it/them correctly.
Can't receive radio broadcasts.
Connect the antenna correctly. If the input strength of antenna signal is weak, install the FM antenna in a place with good reception.
There is no sound from surround speakers.
Are the surround speakers connected properly? Is SURR (surround) incorrectly set to NONE in the Speaker Size? Is surround mode set to stereo?