Quick Setup Guide
Congratulations on the purchase of your new Samsung TV. Read this setup guide to get your TV up and running quickly. 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112 Samsung Electronics Canada Inc. 55 Standish Court Mississauga, Ontario L5R 4B2 Call Center hours of operation: Mon-Sun, 9:00 AM -12 AM EST. To register this product, visit: www.samsung.com/register.
Step 4 : Connect External Devices
Connecting an AV device (Blu-ray player, cable/satellite box, etc.)
LN32C530 / LN37C530 / LN40C530 / LN46C530 / LN52C530

HDMI IN 4

For the very best picture quality, select HD signal sources and use HDMI cables and connections. Note that many digital cable programs are not in HD. Check with your video provider to ensure your are receiving HD signals.

AV IN 2 (HDD) USB1

Connecting an audio device
Connect your TV to your Home Theater or other audio device to enjoy enhanced sound quality.

AV IN 2

(HDD) USB1 USB1
Please do not return this unit. If you have problems operating your TV, call: 1-800-SAMSUNG (1-800-726-7864) For web support please visit: www.samsung.com/support
Analog Audio connection HD connection (up to 1080p)

Using an HDMI Cable

Using an Audio Cable

AUDIO IN

Device

HDMI OUT

Amplifier / DVD Home Theater

Getting Started

Step 1 : Install the Stand
Follow the steps below to connect the TV to the stand.
The HDMI connection carries digital video and audio.
DVD / Blu-Ray player / HD Cable Box / HD Satellite receiver (STB)

Digital Audio connection

Using an Optical Cable

Digital Audio System

OPTICAL

Best Connection

(HDD) USB1
HD connection (up to 1080p)
Using an DVI to HDMI Cable

(HDD) USB1 HDMI IN 4

USB2 USB2
Make sure to distinguish between the front and back of the Stand and Guide
Stand when assembling them. Make sure that at least two people lift and move the LCD TV. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side.

1 Guide Stand

(32 inch model only)

DVI OUT

AUDIO OUT
DVD / Blu-Ray player / Cable Box / Satellite receiver (STB)

Connecting a PC

Connect your TV to a PC to use it as a Monitor.
HDMI IN 4 (HDD) USB1 USB1

Very Good Connection

Component connection (up to 1080p)

Using a Component Cable

s s s s

COMPONENT OUT

HD connection

2 Stand

Top View

Bottom View

Audio/Video connection (480i only)
Using an Audio/Video Cable

VIDEO OUT AUDIO OUT

VCR / DVD / Blu-ray player / Cable Box / Satellite receiver
When connecting to AV 1 on the back of your TV,

Good Connection

attach the video cable (yellow) to the green jack next to the AV In 1 label. The jack will not match the color of the video cable (yellow).

HDMI IN 4 (HDD) USB1

Lowest Quality Connection

Using an D-Sub Cable

PC OUT AUDIO OUT

LN40C540 / LN46C540

Step 2 : Install the Batteries into the Remote
To install batteries into your remote control, follow these steps: 1. Lift the cover on the back of the remote upward as shown in the figure to the right. 2. Install two AAA batteries. Make sure to match the + and - ends of the batteries to the diagram in the battery compartment. 3. Replace the cover.

DVD / Blu-Ray player / HD Cable Box / HD Satellite receiver (STB) AV IN 2
USB2 USB2 HDMI IN 4 (HDD) USB1

USB2 AV IN 2

Step 3 : Connect Power and Antenna or Cable

Connect Ant In to:

or Power Input Use a 75 ohm (round) cable.
Wall cable jack or VHF/UHF Antenna or Cable or Satellite box Ant or Cable Out

AUDIO OUT COMPONENT OUT

Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When connecting to AV1 on the back of your TV, attach the video cable (yellow) to the green jack next to the AV In 1 label. The jack will not match the color of the video cable (yellow).

English - 1

[LC530540-QSG]BN68-02610C-01Eng_0831.indd 1 2010-09-01 9:48:20
Step 5 : Run Plug & Play

Changing the Screen Size

After you have selected the cable system type, select Start, and then press the EnterE button on your remote.
Changing Channels and Adjusting the Volume

PRE-CH PRE-CH

When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TVs channel memorizing process. It also displays connection instructions similar to those in this guide. To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the EnterE button. To skip a screen, press the Menu button. To turn on your TV, press the Power button on the remote or press the Power button on the TV. To run Plug & Play, follow these steps:
Most cable systems are Standard (STD) systems. If you are not sure
about what kind of cable system you have, contact your cable company.
Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. To change the screen size, press the P.Size button on your remote. The first time you press it, your TV displays the current setting. There after, each time you press the P.Size button, you change the size of the picture on the screen. The following sizes are available:

Volume

Channel
CHLIST MENU CHLIST MENU FAV.CH MEDIA.P Change the channels by pressing the z button on the remote. TOOLS
The TV memorizes the available channels. This process can take up to 45 minutes. After the TV has memorized the channels, the Clock Mode screen appears. Choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you dont, or if you have a cable or satellite box. When done, press EnterE button. The Daylight Savings screen appears.

FAV.CH MEDIA.P Adjust the volume by pressing the y button on the remote. TOOLS INFO
If your TV is attached to a cable

RETURN

Plug & Play
Select Language of the OSD. Language

English Espaol Franais

U Move E Enter
or satellite box, you change the channel using the boxs remote. EXIT
If you select Manual, the clock setting screen appears.
7. 8. Select the daylight saving time setting: Off, On, or Auto, and then press EnterE button. After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section. The Enjoy your TV screen appears. and then press EnterE button.
Wide Fit 4:3 Standard screen Screen Fit 16:9 Wide screen Zoom 1 Zoom 2
S.MODE You can also change theSLEEP channels by pressing the P.MODE P.SIZE z buttons on the front panel of your TV and adjust the volume by pressing the y buttons. MTS CC S.MODE P.MODE SLEEP P.SIZE MTS CC

: English

Remote control sensor

Power Indicator

On the Language screen, select the language for the On Screen Display (OSD) using your remote control, and then press EnterE button. The Home Use screen appears. Select Home Use, and then press EnterE button. If you select Store Demo, the TV will reset your picture and audio settings every 30 minutes. After you press EnterE button, the Antenna Source screen appears. If your TV is only attached to an antenna, select Air. If your TV is only attached to cable and you have no cable box, select Cable. If your TV is attached to an antenna and cable with no box, select Auto. When done, press EnterE button on your remote. The Select Cable System screen appears. IMPORTANT: If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.

Basic Functions

Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the Source button on your remote. Each time you press the Source button, you change to a different source.

PRE-CH

Screen Fit displays a full HD picture covering the entire screen with no cutoff
on any side. It is only available when your TV inputs an HDMI (720p, 1080i, 1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.

Setting the Clock

Before you can use your TVs On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. 2. Turn on your TV. Using your remote, press the Menu button on your remote. Then, select Setup Time. Select Clock Mode, and then press the EnterE button. Set Clock Mode to Auto or Manual.

Month -Hour -L Move

Changing the Picture Mode
Your TV has four preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions. The Picture Modes are listed and described in the table below: Mode Dynamic Standard Natural Movie

CHLIST MENU

Clock Set

Day -Minute -U Adjust

Year ---am/pm -E Enter R Return
If your TV is attached to a cable system and you have no cable box, you must select your cable system type. If you have Digital cable, you must select the cable system type for both Analog and Digital.
Description Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room. For a bright, detailed picture in a normally lit room. For a comfortable, easy-on-the-eyes picture in a normally lit room. For a studio quality cinema picture in a dimly lit or dark room. 4. 5. 6.
Select Auto if you have a digital
When you set Clock Mode to Manual
Remote Control Buttons and Functions:
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.
Turns the TV on and off. Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV.

MEDIA.P

channel in your area and are not using a cable/sat box.
Select Clock Set, and then press the EnterE button. The Clock Set screen appears. Using the number buttons on your remote, enter the month, day, year, hour, and minute. Use the or button to move between entry fields. Press the Return button on your remote when done.

To change the Picture Mode, follow these steps: 1.

FAV.CH INFO

Turn on your TV. Using your remote, press the Menu button on your remote. Then, select Picture Mode. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want. Press the Exit button to exit the menu.

2. 3. 4.

Press number buttons for direct access to channels.
Connecting a USB Device for Media Play
You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps: 1. 2. Turn on your TV. Connect a USB device containing photo, music and/ or movie files to the USB (HDD) jack on the side of the TV. When the Application selection screen appears, press the EnterE button on your remote to select Media Play (USB).

MediaPlay

Videos
Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3, press 54, press -, and then press 3. Adjusts the volume.

CHLIST

Return to the previous channel. Cut off the sound temporarily. Change channels. Displays the main on-screen menu.

TV Side Panel

Viewing the On Screen Menus
S.MODE P.MODE SLEEP P.SIZE MTS CC
To view the On Screen Menus, follow these steps: 1. With the power on, press the Menu button on your remote. The main menu appears. The menus left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application, and Support. Press the or button on your remote to select a menu option, and then press the EnterE button.
CHLIST MEDIA.P TOOLS MENU

USB Drive

Displays the channel list on the screen. View the Media Play. Quickly selects frequently used functions. Selects the on-screen menu items and changes the values seen on the menu. Return to the previous menu. Colored buttons for use in the Channel List, Media Play menu, etc.
RETURN MEDIA.P TOOLS MENU FAV.CH INFO
Displays Favorite Channel Lists on the screen. Press to display information on the TV screen. 2.

Exit the menu.

When done using the menu, press the Exit button on your remote to exit.

SUM A Change Device

D View Devices E Enter R Return

S.MODE P.MODE

SLEEP P.SIZE

MTS CC

S.MODE: Selects the sound mode. SLEEP: Setting the Sleep Timer. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). P.MODE: Selects picture mode. P.SIZE: Choose the picture size. CC: Controls the caption decoder.
Use these buttons in the Media Play and Anynet+ modes. ( : controls recording on Samsung recorders with the Anynet+ feature)

BN68-02610C-01

English - 2
[LC530540-QSG]BN68-02610C-01Eng_0831.indd 2 2010-09-01 9:48:24

Belecting an antenna

Press the A or button, then press the ENTERI_
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the A, T, _ or I_ button, then press the ENTERI_ button. Selecting a channel The channel search will start automatically. For more information, refer to Channel -_ Auto Program. (R13) Press the ENTERI_ Setting the Clock Mode button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually. <_ If you select the Auto, set the daylight saving time. Select the time zone where you live.
vtewtng the HD Connection Guide. Enjoy your TV.
The connection method for the best HD screen quality is displayed. Press the ENTERI_ button.
if You Want to Reset This Feature. (_ MENUiTrl --_ Setup _ Plug & Play _ ENTER_

Connections

Using an HDMi / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB). LN320530 / LN370530 / LN400530 / LN460530 ::

LN400540 / LN460540

HDM_ _N I(DVl), 2, 3, 4 / PC/DV_ AUDIO B,_ When using an HDMI/DVl cable connection, you must use the HDMI B,_ (DW} jack for video. A DVD, Blu-ray 1 player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVl to HDMI) cable or DVI-HDMI (DVl to HDMI) adapter. The PC/DW AUDIO B,_ jack is required for audio If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker abnormal Color). If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade. It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur.

............ i

Using a Component Cable: (up to 1080p), Using an Audio/Video

Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
When connecting to AV IN 1, the _OMPONFNT _N 1_ 2 / AV _N 1,2_ color of the AV IN 1 [Y/VIDEOI jack (Green does not match the color of 1:he vlaeo cable (Yellow). For better picture quality, the Component connection is recommended over the A/V connection.

Blue Green

Using an Optical (Digital) or Audio (Analog) Cable Connection Available devices: Digital Audio System, Amplifier, Home Theater

Connector for service only.
Input Cables (Sold Separately)

Edit Name

(_ MENU rlTI --_ Input--_ Edit Name _ ENTERE__ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVl Devices / TV / IPrv / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the NDM_ _N I(DW) port, you should set to DVI PC mode under Edit Name. When connecting an HDMI/DVI cable to the HDMI _N I(DV_} port, you should set to DVI PC or DVl Devices mode under Edit Name.

Source List

m (_ MENUITTI _ Input _ Source List _ ENTERI_ SOURCE
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver. Ill
TV / AVl / AV2 / Component1 / Component2 / PC / HDMml/DVm/ HDMm2/ HDMm3/ USB (LN32C530 / LN37C530 / LN40C530 / LN46C530) IV / AVl / AV2 / Component1 / Component2 / PC / HDMml/DVi / HDMm2/ HDMm3/ HDMm4/ USB (LN40C540 / LN46C540) You can only choose external devices that are connected to the TM In the Source List, connected inputs will be highlighted. PC always stay activated.

Basic Features

How to Operate the OSD (On Screen Display) Before using the T_, follow the ste )s below to learn how to navk ate the menu and select and adjust different functions. The access step may differ depending on the selected menu.
MENU The menu appear ma,o opt,ons on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support. At tP".. Select an icon with the A or T button.
8 ENTER _ Press ENTERI_ access the.. submenu,
A i, Select the desired submenu with.. the A or button. 4/ O MENU button: Displays the main on-screen menu. ENTERE_ / Direction button: Move the cursor and select an item. Confirm the setting. RETURN button: Returns to the previous menu. O EXIT button: Exits the on-screen menu. :_. ENTERIZ_ EX,T-4j PressENTERL%_toconfirmthe selection. Press EX,T. the OSD maymenu. depending on the selected differ Ad ust the value of an item with the 4 or I_ button. The ad ustment in

Select your preferred picture type by pressing the RMODE button. [] [] Dynamic: Suitable for a bright room. Standard: Suitable for a normal environment. Natural: Suitable for an eye comfortable display. Natural is not available in PC mode. [] Movie: Suitable for watching movies in a dark room.
Setting up the TV with your PC
Set the input source to PC.

Auto Adjustment

(_ MENU iTrl _Picture ENTER E_ _ Auto Adjustment --_
Adjusting picture settings
(_ MENUiTrl --_ Picture _ Backlight -_ ENTERE__} _
Adjust frequency values/positions and fine tune the settings automatically. Not available when connecting through HDMI/DVI cable.

Backlight Sharpness

/ Contrast / Brightness / Color / Tint (G/R)

Screen

[] Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen. Position: Adjust the PC's screen positioning if it does not fit the TV screen. Press the A or T button to adjust the Vertical-Position. Press the _ or !_ button to adjust the Horizontal-Position. Image Reset: Resets the image to default settings. (PC) Display
Your television has several setting options for picture quality control. NOTE * When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly. * In PC mode, you can only make changes to Backlight, Contrast and Brightness. * Settings can be adjusted and stored for each external device connected to the TV. * Lowering picture brightness reduces power consumption. [] []
Using Your TV as a Computer
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on "Control Panel" on the Windows start menu. 2. 3. 4. Click on "Appearance and Themes" in the "Control Panel" window and a display dialog-box will appear. Click on "Display" and a display dialog box will appear. Navigate to the "Settings" tab on the display dialog-box. The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] If a vertical-frequency option exists on your display settings dialog box, the correct value is '60' or '60 Hz'. Otherwise, just click 'OK' and exit the dialog box.

Ill Ill

Flesh Tone: Emphasize pink "flesh tone". Edge Enhancement (Off / On): Emphasize object boundaries.
After selecting FitinHDMI Screen (1080i/1080p)m Auto Protection Time (2 hours / 4 hours / 8 hours or Component (1080i/1080p) mayeed mode, you n to / 10 hours / Off): If the screen remains idle with a still center picture: the image for a certain period of time defined by the user, 1. Press _ or_ button the toselect Position. the screen saver is activated to prevent the formation of ghost images on the screen, 2. Press ENTERI_ the button. 3. Press A,_',_ or!_button the the tomove picture. Picture Reset (OK / Cancel) 4. Press ENTERC_ the button. Resets your current picture mode to it's default settings. 5. Press _ or_ button the toselect Reset, 6. Press ENTERI_ the button. * HD Definition): 1080i/1080p (High 16:9 (1920x1080), 720p (1280x720) Changing the Preset Sound Mode * Settings be can adjusted stored each and for external you connected device have toaninput on (_ MENUiTrl _ Sound _ Mode _ ENTERC_ the TV. ATe, AV, 16:9, Zoom1, Component480p) Zoom2, (480i, 4:3 DTV(1080i), 16:9, Wide it, 4:3, F Component 1080p), (1080i, Screen Fit HDMI 1080i, (720p, 1080p) PC 16:9, 4:3 Digital Filter / Low / Medium / High / Auto Noise (Off
/ Auto Visualization ): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. When the signal is weak, try other options until the best picture is displayed. Auto Visualization : When changing analog channels, displays signal strength. Only available for analog channels. When bar is green, you are receivin the best possible signal. MPEG Noise Filter (Off/Low / Medium / High / Auto): Reduces MPEG noise to provide an improved picture quality. Disabled under PC mode. HDMI Black Level (Normal / Low): Selects the black level on the screen to adjusts the screen depth. Available only in HDMI mode (RGB signals). Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality. Available in TV, AV, COMPONENT (480i/1080i) and HDMI (480i/1080i), (_

Setting the Time

MENurm -_Setup-_Time-_ ENTERE_
The current time will appear every time you press the _NFO button. Clock: Setting the clock is for using various timer features of the TV. If you disconnect the power cord, you have to set the clock again. Clock Mode: Set up the current time manually or automatically, - Auto: Set the current time automatically using the time from the digital channel, The antenna must be connected in order to set the time automatically, - Manual: Set the current time manually, Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually, Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm, Available only when Clock Mode is set to Manual. You can set the Month, Day, Year, Hour and Minute directly by pressing the number buttons on the remote control.
Auto Volume (Off/Normal/Night)
To equalize the volume level on each channel, set to Normal. Ill Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise, it is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. When Speaker Select is set to External Speaker, you should use these settings. * TV Speaker: Off, External Speaker: On When Speaker Select is set to TV Speaker, you should use these settings. * TV Speaker: On, External Speaker: On If there is no video signal, both speakers will be mute.
DST (Daylight Time) / On): Switches the Saving (Off
Daylight Saving Time function on or off, This function is only available when the Clock Mode is set to Auto. Time Zone: Select your time zone. This function is only available when the Clock Mode is set to Auto.
Channel (when the Source is set to iV): Select the desired channel. Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. When there is only one photo file in the USB, the Slide Show will not play. If a folder name is too long, the folder cannot be selected. Each USB you use is assigned its own folder.

Using the Sleep Timer

(_ MENU iTfl _ Setup _ Time _ Sleep Timer ENTER E_ Sleep Timer _ : Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). To cancel the Sleep Timer, select Off.
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. The _/ mark indicates the day is selected. Auto Power Off (available only when the TV is turned on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

Setting the On/Off Timer

@ MENU iTFI--_ Setup _ Time --_Timer 1 ENTER Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

Locking Programs

MENU ITTI_ Setup --_ Security --_ ENTERI_

Security

The PIN input screen appears, Enter your 4 digit PIN number. V-Chip: The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identification number) before any of the V-Chip restrictions are set up or changed. NOTE On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you've chosen, set to Activate.) Volume: Set the desired volume level. Source: Select -IV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select Air or Cable. * V-Chip is not available in HDMI, Component or PC mode. * The default PIN number of a new TV set is "0-0-0-0". * Allow all: Press to unlock all TV ratings. * Block all: Press to lock all TV ratings. V-Chip Lock (Off/On): Programs. You can block rated TV

English 19

iV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching. - TV-Y: Young children / TV-Y7: Children 7 and over / rV-G: General audience / rV-PG: Parental guidance / TV-14: Viewers 14 and over/TV-MA: Mature audience - ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog The V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block the TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked. MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children. - G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NO-17: No children under age 17. / X: Adults only. / NR: Not rated. The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG-13 category, then R, N0-17 and X will automatically be blocked. Canadian English: You can block TV programs depending on their Anglophone Canadian ratings. - C: Programming intended for children under age 8. / 08+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G: General programming, suitable for all audiences. / PG: Parental Guidance./14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming. The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then PG, 14+ and 18+ will automatically be blocked. Canadian French: You can block TV programs depending on their French Canadian rating. - G: General/8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / 13 arts+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults. The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 arts+, 16 ans+ and 18 arts+ will automatically be blocked also. Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels. NOTE * If information is not downloaded from the broadcasting station, the Downloadable rating menu is deactivated. U.S.

(_ MENUiTrl --_ Setup -, ENTERE__} _

Menu Language.....

Set the menu language. 1. 2. Select Menu Language and press the ENTERC_ button. Choose desired language and press the ENTERE_ button.

Caption

(On-Screen Text Messages) [] Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. The Caption feature doesn't work in Component, HDMI or PC modes. [] Caption Mode: You can select the desired caption mode. The availability of captions depends on the program being broadcasted. Default / OO1~004 / Text1 ~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the T_. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.) Default / Service1 ~Service6 / OO1~004 / Text1 ~Text4: (digital channels only) The Digital Captions function works with digital channels. Service1~6 may not be available in digital caption mode depending on the broadcast. [] Digital Caption Options: (digital channels only) Size: Options include Default, Small, Standard and Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7. The default is Style 0. Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.

General

[] Game Mode (Off/On): When connecting to a game console such as PlayStation TM or Xbox TM, you can enjoy a more realistic gaming experience by selecting the game menu. NOTE * Precautions and limitations for game mode - To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. - If you display the TV menu in Game Mode, the screen shakes slightly. * Game Models not available when the input source is set to TV or PC. * After connecting the game console, set Game Mode to On to prevent poor picture quality. * If Game Mode is On: Picture mode is set to Standard and Sound mode is set to Movie. * Selecting Reset after adjusting the equalizer returns the equalizer to its default settings.

You call ascertain the selected file name and tile number of files and page. File List Section: You can confirm the files and groups that are sorted by category. Displays the sorting standard. '_ The sorting standard is different depending on the contents.
Operation Buttons Q Red (Ohange Device): Selects a connected device. _i_i!_ Green (Preference): Sets the file preference. (not supported in Basic view) Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol. D Blue (Sorting): Selects the sort list. _] Tools: Displays the option menu. Using the _ or _ button, file list can move to next or previous page.

Videos

Playing Video 1. 2. 3. Press the 41 or _ button to select Videos, then press the ENTERI]_ button in the Media Play menu. Press the 41/_-/A/_' button to select the desired video in the file list.
Press the ENTERI]_ button or FCq(Play) button. The selected file is displayed on the top with its playing time. If video time information is unknown, play time and pregress bar are not displayed. During video playback, you can search using 41 and I_ button. In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
Supported Subtitle Formats
MPEG-4 time-based text SAMI SubRip SubViewer Micro DVD
.ttxt.smi.srt.sub.sub or.txt
XML HTML string-based string-based string-based

Eng,,sh 25

Supported Video Formats
Divx 3.11 / 4.x / 5.1 / 6.0 *.avi *.mkv AVI MKV XvD H.264 BP / MP / HP MPEG4 SP / ASP Divx 3.11 / 4.x / 5.1 / 6.0 *.asf ASF XvD H.264 BP / MP / HP MPEG4 SP / ASP *.wmv ASF Window Media Video v9 H.264 BP / MP / HP *.rap4 MP4 MPEG4 SP / ASP XVID H.264 BP / MP / HP *.3gp 3GPP VRO VOB MPEG4 SP / ASP MPEG1 MPEG2 MPEG1 *.mpg *.mpeg PS MPEG2 H.264 MPEG2 *.ts *.tp *.trp TS H.264 VC1
1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080
6-- - - 30 6-30 6-- - - - - - - - / 25 / / 25 / / 25 / / 25 / - / 25 / - - 30
AC3 / AAC / MP3 / DD+ / HE-AAC AC3 / MPEG / LPCM / AAC ADPCM / AAC / HE-AAC MP3 / ADPCM / AAC WMA MP3/AC3 / LPCM / MP3 / AC3 / LPCM / ADPCM / DTS Core

_/ _/ _/

iiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiii

Settings......

Using the Setup Menu II II Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie playback, Get DivX VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration is completed. For more information on DivX VOD, visit "www.DivX,com." II II Get DivX VOD deactivation code: When DivX VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX VOD is registered, the current DivX VOD registration is deactivated. Information: Select to view information about the connected device.

English 29

What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a Samsung Home Theater LN320530 / LN370530 / LN400530 / LN460530 w
Home Theater Anynet + Device 1 Anynet + Device 2, 3

HDMICable

HDMI Cable

LN40C540/LN46C540

HomeTheater

Anynet Device1

Anynet + Device2, 3, 4

OlGFA. AI Ol0 IN

HDMIOUT

_4OMI IN

)ptical MICab
Connect the HDM_ _N (1(DV_),2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. NOTE Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL} jack on your TV and the Digital Audio Input on the Home Theater. When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the D_G_TALAUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV. Only one Home Theater can be connected. You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
View IV Device List (devicename) MENU
Changes Anynet+ mode to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) Stops recording. Sound is played through the receiver.
(devicename) INFO Recording: (*recorder) Stop Recording: (*recorder) Receiver
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*devicename).

Setting Up Anynet+

(_ MENU iTrl --_ Application Setup Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off. The active source on the TV must be set to TV to use the Anynet+ function. Even if an external device is still recording, it may turn off. _ Anynet + (HDMI-CEC) -_ ENTERI_
Switching between Anynet+ Devices
Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to refresh the list. Select a device and press the ENTERIZ_ button. You can switch to the selected device. Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
* Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. * If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

Recording

You can make a recording of a TV Program using a Samsung recorder. 1. Select Recording, When there are more than two recording devices * When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List. When the recording device is not displayed, select Device List and press the Red button to search devices. 2. Press the EXIT button to exit. You can record the source streams by selecting Recording: (device_name).
Pressing the [_q (REC)button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device's users manual.

English 31

Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL} jack of the TV. When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver, When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. NOTE " You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. " The TV remote control may not work under certain conditions, If this occurs, reselect the Anynet + device. " The Anynet + functions do not operate with other manufacturers' products.
Troubleshooting for Anynet+
iiiiii_!_! _ili i_ii_ii_iiii i!i!i!i_i!i_i!_iii_iii_i i!!i!iiiii!!i!_{_ii_i!_ii_ii_ii_iii!iii @!i_i_i@i__ii_ii_ii_ii_ii !!!!!!!!!! ii_ili_!!!!_!!_!_ii!iiiiiii!i !!i{_i!_ii_ii_!!i!_ii}ii_ili}_ !ili!!_i!i_i! ii!i_!_!ili!ii!i_i_,i_ii!iii!!iii!ii!iil iiiiiiiiii iiiili!ii_! i_ii_il _i_i_i_i_i_i_i_i i!_iliiii_ii_i!!! iii!i _!_i!!!_!_! ilili_ii_ii ilililiii_!!i_i_i_i_i!ii!!iii!ii_i!_ii_i!_!_il iiiii _!_!_!!_i_!_,_i_i_!_i_il ii!iiiilil !i_i!ii!i!!i ii_iii_iii_iii_i!iii! i!iiii ilili_ilili_ili_!!!!!!!_!!_!!_ i!_i!_iiii!iiiiill i!iiii i!i_i!!_iliiii_ii iiiill _i_i_i_i_i_ili!_}iii_iiiiii!_ii_ii!i!!i!!i!!i!!i!!i!! _ii_ililJi _i!!!_!!!!! !ii!!i i!iiiiiii_!i!_iii !_ii_iiiiii!iii!ii!!iii iii!iii!iil iii!i iiii!i ii_ii i_iii_i!i_i!_i!_i!_ _ii_iiiii_ii!iiiii_!iiiiiiiii_iiiii_!i_ii iiii!ii_iii! i ililiiiii_!!_i ii_iii iiiiii!!} !i_i!i _i!i_iii_i

There is poor color or brightness.

,, ,,

There is a dotted line on the edge of the screen. The picture is black and white.

,, ,, ,,

When changing channels, the picture freezes or is distorted or delayed.
There is no sound or the sound is too los! at maximum volume. The picture is good but there is no sound.
Please check the volume of the device (CabldSat Box, DVD, Blu-ray etc) connected to your TV.

,, ,, ,, ,,

Set the Speaker Select option to rv speaker in the sound menu. (R 18) If you are using an external device, check the device's audio output option (ex. you may need to change your cable box's audio option to HDMI when you have a HDMI connected to your TV). If you are using a DVI to HDMI cable, a separate audio cable is required. Reboot the connected device by reconnecting the device's power cable. Check cable connections. Make sure a video cable is not connected to an audio input. For Antenna or Cable connections, check the signal information. Los! signal level may cause sound distortion. Perform the Sound Test as explained above.
The speakers are making an inappropriate noise.

The TV won't turn on.

Make sure the AC power cord is securely plugged in to the wall outlet and the TV. Make sure the wall outlet is working. Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to 'Remote control does not work' below. Ensure the Sleep Timer is set to Off in the Setup menu. (R 19) If your PC is connected to the TV, check your PC power settings. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal. Check cable connections. (remove and reconnect all cables connected to the TV and external devices). Set your external devbe's (Cabb/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external devbe's output is HDMI, it should be connected to an HDMI input on the TV. Make sure your connected devbes are powered on. Be sure to select the TV's correct source by pressing the SOURCE button on the remote control. Reboot the connected device by reconnecting the device's power cable.
The TV turns off automatbally.
There is no pbture/video.
The TV is not receiving all channels.
Make sure the coaxial cable is connected securely. Please try Auto Program to add available channels to the channel list. go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC) (R 13) Verify the Antenna is positioned correctly. Check Caption Setup menu. Try changing Caption Mode Service 1 to OO1. (R 21) Some channels may not have caption data. Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies. A low signal can cause picture distortion. This is not a TV problem.

__ 2.0+l}igitalOut

Open source license notice In the case of using open source software, Open Source Licenses are available on the product menu. English 39
II Front view / side view

I--o-I

(Unit: inches)
i /llili !i!!!i illiii !lilliltiliiiilii / ii iiiiil iiii ll:I I
LN320530 LN370530 LN400530 LN400540 LN460530 LN460540 30.8 35.5 38.2 38.2 43.4 43.4 27.6 32.4 35.0 35.0 40.2 40.2 15.5 18.3 19.7 19.7 22.6 22.6 17.7 22.8 22.8 22.8 24.4 24.4 19.6 22.1 23.6 23.3 26.6 26.3 21.5 24.2 25.7 25.7 28.9 28.9

ii!i i!i ll iiii

3.0 3.0 3.1 3.1 3.1 3.1 8.7 9.5 9.5 9.5 10.2 10.2

detail

/ rear view

. o_ @ _

.. _ _
LN32C530 LN37C530 LN40C530 13.2 LN40C540 LN46C530 LN460540 16.1 3.7 4.0 31.8 15.7 2.7 4.0 27.6 7.9 9.8 12.4 2.0 3.2 3.8 3.3 20.9 24.6 7.9 7.9

i_il; 7.9

7.9 7.9
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 2010 Samsung Electronics America, Inc
Anynet+ AUDIO OUT Auto Adjustment 15
HDMI Home theater L 8, 30 9, 30
Sleep Timer Slide Show Software Upgrade Source List 39 Speaker Select Standby mode 18 5
a Blanking Bracket Balance

M.... T

Media Play Melody Timer 19

Component 9

Menu Language MP3 Play
Video play Volume 25 5, 6, 19
D_G_TALAUDIO OUT D-sub DVD home theater 9, 9

Optimal resolution 11

Wall Mount P E...... Photo view 27 Editing channels Energy Saving Equalizer 17 PIN number PIP Power Indicator 5
FAV,CH button Favorite Channel 6, 13 13

Remote Control RGB 6 16

English 4