Here you can find all about Samsung PS50B450 like review and other informations. For example: manual, plasma tv, price, plasma tv price.
Samsung PS50B450 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Samsung PS50B450 please write about it to help other people. [ Report abuse or wrong photo | Share your Samsung PS50B450 photo ]
Samsung PS50B450 TV, size: 5.5 MB
Samsung PS50B450 B1w Quick Guide (ver.1.0)
Samsung PS50B450b1w Open Source Guide (ver.1.1)
Samsung PS50B450b1w Quick Guide (ver.1.0)
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country EIRE U.K SAMSUNG(7267864) Customer Care Centre Web Site www.samsung.com/ie www.samsung.com/uk
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
Model Serial No.
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. The product is making a cracking noise. A cracking noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. Cell Defects The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. Avoid operating the TV at temperatures below 5C(41F) A still image displayed too long may cause permanent damage to the PDP Panel. Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Afterimage on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the brightness and contrast when displaying still images. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. Installation Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Digital TV Notice
Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital
terrestrial signals are broadcasted or where you have access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Program Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be supported at this moment. Although this TV set meets the latest DVB-T and DVB-C standards[August,2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with all providers. For more information, please contact your local Samsung customer care centre.
If you want to reset this feature.
Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTERE button. Press the ENTERE button again to select Plug & Play. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. If you want to change PIN number, refer to page 31.
Menu Language Time Broadcast Security General : English
The Plug & Play feature is only available in the TV mode.
Viewing the Menus
With the power on, press the MENU button. The main menu appears on the screen. The menus left side has icons: Picture, Sound, Channel, Setup, Input, Application, Support. Press the or button to select one of the icons. Then press the ENTERE button to access the icons sub-menu. Press the EXIT button to exit. The on-screen menus disappear from the screen after about one minute.
Cell Light Contrast Brightness Sharpness Colour Tint (G/R)
:4 : 95 : 45 : 50 : 50 : G50/R50
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing.
Press the TOOLS button. The Tools menu will appear. Press the or button to select a menu, then press the ENTERE button. Press the / / / / ENTERE buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page.
Picture Mode Sound Mode Sleep Timer Energy Saving Add to Favourite
Anynet+ (HDMI-CEC) : : : : Standard Custom Off Off
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings. Press the INFO button to viewing the information.
Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. , : You can view other channels information. If you want to move to the currently selected channel, press ENTERE button. , : You can view the desired programs information at the current channel. Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically.
18:11 Thu 6 Jan
Unclassified No Detaild Information
Life On Venus Avenue
E Watch ' Information
Channel Option Country Description
Digital Channel You can change the country for digital channels. Analogue Channel You can change the country for analogue channels. The PIN number input screen appears. Enter your 4 digit PIN number. Scans for all channels with active broadcast stations (and availability depends on your country) and stores them in the TV's memory. You can memorize the channels of the selected connection. Air / Cable Antenna source to memorize
Channel Option Channel List Description
Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts. All Channels Shows all currently available channels. Added Channels Shows all added channels. Favourites Shows all favourite channels. Programmed Shows all current reserved programmes. Select a channel in the All Channels, Added Channels, Favourites, or Programmed screen by pressing the / buttons, and pressing the ENTERE button.Then you can watch the selected channel.
A A A A A A A A
UKTV Gold UKTV style C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C - Zoom Select Tools
Using the Colour buttons with the Channel List Red (Channel Type): Toggle between your TV, Radio, Data/Other and All. Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. Channel Status Display Icons A
TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Lock (or Unlock), Select All (or Deselect All), or Auto Store menu. (The Options menus may differ depending on the situation.)
\ c ( )
An Analogue channel. A channel set as a Favourite. A locked channel. A channel selected by pressing the A programme currently being broadcast. A reserved programme
Press the CH LIST button on the remote control to bring up the channel lists.
Channel List Tools Menu (in All Channels / Added Channels / Favourites) Press the TOOLS button to use the Tools menu. Tools menu items may differ depending on the channel status. Add / Delete You can delete or add a channel to display the channels you want. All deleted channels will be shown on All Channels menu. You can also delete a channel to the Added Channels or Favourites menu in the same manner.
A gray-coloured channel indicates the channel has been deleted. The Add menu only appears for deleted channels.
Add to Favourite / Delete from Favourite You can set channels you watch frequently as favourites. The symbol will be displayed and the channel will be set as a favourite. All favourite channels will be shown on Favourite menu. Timer Viewing If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme set the current time first. Only memorized channels can be reserved. You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control. Reserving a programme will be shown on Programmed menu. Digital Programme Guide and Viewing Reservation When a digital channel is selected, and you press the button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above. Edit Channel Name (only analogue channel) Channels can labeled so that their call letters appear whenever the channel is selected. The names of digital broadcasting channels are automatically assigned and cannot be labeled. Edit Channel Number (only digital channel) You can also edit the channel number by pressing the number buttons on the remote control. Sort (only analogue channel) This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Lock / Unlock You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to On. The PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu. The \ symbol will be displayed and the channel will be locked. Press the TOOLS button to display Tools menu. You can also add the favourite channel by selecting Tools Add to Favourite (or Delete from Favourite).
Picture (In the 3D mode) Option 3D Effect Description
Changing the Mode Provides the function to turn on the 3D Effect. You can choose between Mode1 and Mode2. To achieve the 3D effect, the 3D glasses shutter back and forth from the left to right and vice versa (left/right sync). Off : Turns the 3D Effect function off. Mode1 : Mode 1 operates with right sync first. Mode2 : Mode 2 operates with left sync first. 2D : Provides picture converted 3D to 2D. You can choose this to watch 2D picture temporally when you feel dizzy, but you should choose Off to end 3D Effect completely. If the 3D effect is not working properly, it means the Mode and 3D glasses may not be syncing properly. To put them in sync, switch to the other mode. Changing the Format Select the optimal input format to match your graphic cards or 3D Software. Checker Board : If the output format of your graphic card or 3D software is Checkerboard, select this input format. Horizontal : If the output format of your graphic card or 3D software is Horizontal interleaved, select this input format. Vertical : If the output format of your graphic card or 3D software is Vertical interleaved, select this input format.
Size Screen Mode Digital NR
Picture Options : 16:9
: 16:9 : Auto : Normal : Off
HDMI Black Level Film Mode Screen Burn Protection 3D Effect
3D Effect Mode Format
: Off : Checker Board
Picture (In the PC mode) Option Auto Adjustment Screen Description
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. Coarse Adjusts the frequency when vertical noise appears on the screen. Fine Adjusts the screen to be clearer. PC Position Adjust the PCs screen positioning if it does not fit the TV screen. Press the or Press the button to adjusting the Vertical-Position. Press the or button to adjust the Horizontal-Position. Image Reset You can replace all image settings with the factory default values. Press the TOOLS button to display Tools menu. You can also set the adjustment by selecting Tools Auto Adjustment.
Preset: Press the SOURCE button to select PC mode. This function does not work in DVI-HDMI mode.
Screen Coarse Fine PC Position Image Reset
Move Enter Return
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
SRS TruSurround HD : Off Audio Language Audio Format Audio Description Auto Volume : Off : ---: ----
SRS TruSurround HD
You can select these options simply by pressing the SRS button on the remote control.
Audio Language, Audio Format , and Audio Description is only available in DTV mode.
You can select these options simply by pressing the AD button on the remote control.
Sound Option Speaker Select Description
External Speaker / TV Speaker If you want to hear the sound through separate speakers, cancel the internal amplifier. The =+, MMUTE buttons do not operate when the Speaker Select is set to External Speaker. If you select External Speaker in the Speaker Select menu, the sound settings will be limited. TV's Internal Speakers TV / Ext. / AV / Component / PC / HDMI Speaker Output Mute Mute Audio Out (Optical, L / R Out) to Sound System TV / Ext. / AV / Component / PC / HDMI Sound Output Sound Output Mute
Auto Volume Speaker Select Sound : Off : TV Speaker
TV Speaker External Speaker Video No Signal
Reset All / Reset Sound Mode / Cancel You can restore the Sound settings to the factory defaults.
Selecting the Sound Mode
When you set to Dual l ll, the current sound mode is displayed on the screen. Type of broadcast Regular broadcast (Standard audio) NICAM Stereo Regular + NICAM Mono NICAM-Stereo NICAM Dual-I/II Regular broadcast (Standard audio) Bilingual or DUAL-I/II Stereo NICAM NICAM Stereo NICAM Dual-1 NICAM Dual-2 Mono (Normal use) Dual I Stereo Dual II Mono (Forced mono) On-screen indication Mono (Normal use) Mono (Normal) zMono (Normal) Mono (Normal)
If the stereo signal is weak and an automatic switching occurs, then switch to the mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode.
You can select these options simply by pressing the DUAL button on the remote control.
Setup Option Menu Language Time Description
You can set the menu language. Clock Setting the clock is necessary in order to use the various timer features of the TV. Clock Mode You can set up the current time manually or automatically. Auto: Set the current time automatically using the time from the digital broadcast. Manual: Set the current time to a manually specified time. Clock Set You can set the current time manually. Set up this item when you have set Clock Mode to Manual. You can set the Day, Month, Year, Hour, Minute directly by pressing the number buttons on the remote control. Sleep Timer The sleep timer automatically shuts off the TV after a preset time. (30, 60, 90, 120, 150 and 180 minutes) The TV automatically switches to standby mode when the timer reaches 0. To cancel the Sleep Timer function, select Off. Timer 1 / Timer 2 / Timer 3 Three different on / off timer settings can be made. On Time: Set the hour, minute, am/pm, and Activate/ Inactivate. (To activate timer with the setting youve chosen, set to Activate.) Off Time: Set the hour, minute, am/pm, and Activate/ Inactivate. (To activate timer with the setting youve chosen, set to Activate.) Volume: Set the required volume level. Antenna: You can select either DTV or ATV when the TV turns on automatically. Channel: Select the desired channel. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual. When Manual is selected, press the button to select the desired day of the week. Press the ENTERE button over the desired day and the mark will appear. You must set the clock first. You can set the hour, minute and programme by pressing the number buttons on the remote control.
Setup Option General Description
Game Mode When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting the game menu. When the Game Mode is On Picture Mode is automatically changed to Standard and users cannot change the mode. Sound Mode is automatically changed to Custom and users cannot change the mode. Adjust the sound using the equalizer. The Reset in the Sound menu is activated. Reset function initializes the Equalizer settings to the factory default setting. Game Mode is not available in regular TV mode or Game Mode set to Off. If the picture is poor when external device is connected to TV, check if Game Mode is On. If you display the TV menu in Game mode, the screen shakes slightly. The mark ( ) appears on the screen which means that Game Mode is on with the selected source. This function supports only game function. Energy Saving Off / Low / Medium / High / Picture Off This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off. In the Tools menu, Picture Off function is not supported. Melody Off / Low/ Medium / High The TV power on / off melody sound can be adjusted. The Melody does not play When no sound is output from the TV because the M MUTE button has been pressed. When no sound is output from the TV because the = (Volume) button has been pressed. When the TV is turned off by Sleep Timer function. Press the TOOLS button to display Tools menu. You can also set the Energy Saving option by selecting Tools Energy Saving.
Input Option Source List Description
Use to select TV or other external input sources such as DVD players or Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. TV, Ext., AV, PC, Component, HDMI1, HDMI2/DVI, HDMI3. You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom. Using the Colour buttons on the remote with the Source list Red (Refresh): Refreshes the connecting external devices. TTOOLS (Tools): Displays the Edit Name and Information menus. You can name the device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA When a PC with a resolution of PS42B450/ PS42B451: 640x480@60Hz, PS50B450/PS50B451: 640x480@60Hz, 1280x720@60Hz is connected to the HDMI IN 2 (DVI) port, you should set the HDMI2 / DVI mode to PC in the Edit Name of the Input mode.
Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button, number buttons (0~9), and the P < / > button on the remote control.
Support Option Self Diagnosis Description
Picture Test, Sound Test, Signal Information If you think you have the Picture, Sound, Signal problem, perform the test. You can check the problem state. If you hear no sound from the TVs speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu. The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MMUTE button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.Continue to adjust the antenna until you find the best position with the strongest signal. To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. By USB Insert a USB drive containing the firmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. By Channel Upgrades the software using the broadcasting signal. Standby Mode Upgrade To continue software upgrade with master power on, Select On by pressing the or button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. Alternative Software Replace the current software with the alternative. The brief instruction on How to get the best performance from your new HDTV is displayed. We offer the connection method for HD devices. You can know the Samsung Call center, website and information for product. You can move the previous or next page by pressing the or button.
HD Connection Guide Contact Samsung
Connecting Anynet+ Devices
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TVs remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Setup Anynet+ (HDMI-CEC) Auto Turn Off : ON Off : Yes On
Scanning and Switching between Anynet+ Devices
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Press the or button to select Device List, then press the ENTERE button. Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices. Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu appears. Press the or button to select to a particular device and press the ENTERE button. It is switched to the selected device. Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. The time required to scan for devices is determined by the number of connected devices. When the device scan is complete, the number of devices found are not displayed. Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the connected device. If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
View TV Device List Record DVDR MENU DVDR INFO Receiver Setup U Move L Adjust R Return On : DVDR
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Option View TV Device List (device_name) MENU
Anynet+ mode changes to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) Enables reserving a recording for the recorder. (This is only available for devices that support the recording reservation function.) Stops recording. Sound is played through the receiver. If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_ name).
Listening through a Receiver (Home Theatre)
You can listen to sound through a receiver instead of the TV speaker.
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Press the or button to select Receiver. Press the or button to select On or Off. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV. When the receiver (home theater) is set to On, you can hear sound output from the TVs Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
Troubleshooting for Anynet+
Anynet+ does not work.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ devices Video/Audio/HDMI 1.3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesnt work in certain situations. (Searching channels, Operating Plug & Play, etc.) When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
Check if the Anynet+ device is properly connected to the TV and check if the Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to
You can change teletext pages by pressing the numeric buttons on the remote control.
The Teletext pages are organized according to six categories:
Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information. Teletext information is often divided between several pages displayed in sequence, which can be accessed by: Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system) Part A B C D E F
Press the TV button to exit from the teletext display.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inch 19" ~22" 23"~29" LCD-TV 30"~40" 46"~55" 57"~70" 80" ~ 42"~ 50" PDP-TV 58"~ 63" 70" ~ 80" ~ VESA Spec. (A * B) 100 * * * * * * * * * * 800 MM8 Standard Screw M4 M6 Quantity
We provided the standard dimensions for wall mount kits as shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Our 57 and 63 models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model. Do not exceed 15 degrees tilt when mounting this TV. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Preparing before installing Wall- Mount on the wall
Case A. Installing SAMSUNG Wall-Mount Case B. Installing other companys Wall-Mount
Install Wall Mount with the torque range of 15kgfcm or less. Make sure that parts can be damaged if the torque is out of the specified range. Accessory Kit contains HolderRing  for installing other companys Wall-Mount on Samsung TV. (Case B) screw down the hole  when installing wall-mount on the wall.
Securing the TV to the Wall
Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. You may need additional material such as an anchor depending on the type of wall. Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. Screws may not be supplied with the product. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly. Install the TV near to the wall so that it does not fall backwards. It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. Untie the string before moving the TV. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections,contact a professional installer.
Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture
Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Check if Speaker Select is set to External Speaker.
Normal picture but no sound No picture or black and white picture Sound and picture interference
WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitabl y approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows : The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd. Customer Care Centre PO Box 17243 Edinburgh, EH11 4YB United Kingdom Tel: 0870 SAMSUNG (7267864)(UK & Northern Ireland) Tel: 100 (EIRE Only) Fax: +Web : www.samsung.com
WARRANTY CONDITIONS 1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced. 2. Samsungs obligations are limited to the repair or, at its discretion, replacement of the product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty. 4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
RM826 CSS-HD2 Piano AU-717 1909W ZKT621LX DVF-8945N Logicom L575 PRO L300 NEC LT30 HS-54W Gigaset S670 Curve 8520 GR-DVX8 BJC-85 HBH-PV703 RT2390 E1280 5720Z F2-1002 LAC4810R Plasma Tv Vino-2003 LE32C350d1W UE-26C4000 YP-U3ZB EFW 6225 Model 70 EWR121W Coolpix 5900 706-AVR AD-1500 F14931FD Turbo RHT-G900 CDM-7871R UR19A C515BEE KX-TCD965 Samsung ST70 C TOP BT1100-2004 Coffee 42PX5R-ZB P4B533-VM TE 610E 80403 WF-T507 LS 2001 42PFL5522D 05 MS-2344B HT-X250T LPF 6200 WGE111 PV-GS9 TE100-S50G CE1050-S ZOB341X TC-14S1R VRX 2000 KD-32DX40U G13SR3 2043NW Carnival Concept Protocol MP 6000 MP 7500 MZ-R500PC KMD-860R PB-G03 Plasma Tv Price Manual EL-6890S P7120D SPD-S F Classic 220 ML-1615 890 PRO 2006 HHR Price CVC4087X PSR-B20 DWA-510 SH-W162C Sound DUB100 TX-32LX80P YP-K5JAB E-200-F 42PFL9603D 10 2 1 ZFC22 9K Chronographs Watch E86 UF-490 Interface Bizhub C31P EMP-1710 Quest-1997 AX4B533N CX4080 EU7503C Transformers
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101