Warning

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subjects eyes may cause eyesight damage. For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.: - Swallowing battery or small camera accessories. If an accident should occur, please consult a doctor immediately. - There is the possibility of injury from the cameras moving parts. Battery and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool. Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places of extremes in temperature. Exposure to extreme temperatures may adversely affect the cameras internal components and could cause a fire. When in use, do not cover the camera or charger. This may cause heat to build up and distort the camera body or cause a fire. Always use the camera and its accessories in a well ventilated area.

Caution

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the cameras components. Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns. Do not move the camera while it is switched on if you are using the AC adapter. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock. Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction. Avoid obstructing the lens or the flash when you capture an image. When using this camera in low temperatures, you may experience the following. These are not camera malfunctions and usually recover at normal temperature. - t takes longer to turn on the LCD monitor and the color may differ I from the subject. - hen changing the composition, there may be an after image on W the LCD monitor. Credit cards may be demagnetized if left near the case. Avoid leaving magnetic strip cards near the case. ever connect the 20 pin connector to the USB port of a PC. This N carries a high risk of computer malfunction.

Camera Status Lamp

Status Power on After taking a picture Description The lamp turns on and off when the camera is ready to take a picture The lamp blinks while saving the image data and turns off when the camera is ready to take a picture The lamp lights up (LCD monitor turns off after initializing the device)
MODE ICON MODE ICON MODE ICON MODE ICON

Children

Landscape

Close up

When flash battery is charging The lamp blinks When the USB cable is inserted to a PC When the USB cable is inserted into a printer

Sunset

Backlight

Fireworks

Transmitting Data with a PC The lamp blinks (LCD monitor turns off) The lamp is off
When the printer is printing The lamp blinks When the AF activates The lamp turns on (The camera focus on the subject) The lamp blinks (The camera doesnt focus on the subject)

Beach&Snow

Connecting to a Power Source
You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera. BP70A rechargeable battery Specification
Model Type Capacity Voltage Charging time BP70A Lithium lon 740mAh 3.7V Approximately 150 Minutes
Important information about battery usage. hen camera is not in use, turn off the power. W Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures. During extended use of the camera, the camera body may become warm. This is perfectly normal. onnecting the AC adapter with the USB cable can be used as an C AC cable, and you can charge the rechargeable battery with the AC cable. - sing an AC cable U : onnect the AC adapter to the USB C cable. It can be used as a power cable.
Number of images and battery life: Using the BP70A
Battery life / Number of images Conditions
Using the fully charged battery, Default settings, Program mode, Shot to shot interval: 30Sec. Approx. 105 MIN / Changing the zoom position between Still image Approx. 210 shots the Wide and the Tele after every shot. Using the flash on every second shot. Using the camera for 5 minutes and then powering it off for 1 minute. Movie Using the fully charged battery Approx. 105 MIN 640x480 image size 30fps frame rate
hese figures are measured under Samsungs standard conditions T and shooting conditions and may vary depending on the users methods. 012

D o not use the product for long time on the carpet, comforter or D o not leave the product turned on where the air cannot be B e careful about the battery slot not to be connected with U se only authentic, manufacturer-recommended, Lithium-ion D o not try to disassemble or perforate the product by using a replacement batteries. sharp pin. accessories like necklace, coin, key, watch and so on. circulated. electronic mattress. high humidity range. service center. It may present physical dangers.
Guidelines of disposal Do not throw away the over used battery. Destruction by fire is not allowed for disposal of battery. The disposal instruction may differ depending on the nation or
the specific region. Please follow the given method of disposal.
Guideline of recharging the battery D o not recharge the battery by using the different method other
than the user manual indicates. Failure to follow the correct procedure may result in fire or explosion.
Do not apply pressure to the product. D o not let the product fall down from the height, or do not give a
D o not exposure the product to the high temperature over 60 shock to the product. (140) degree. fire or the like.
Do not exposure the product to the water or humidity. B attery shall not be exposed to excessive heat such as sunshine,
Connecting to a power source
Insert the battery as shown - f the camera does not turn on I after you have inserted battery, please check whether the battery (+ / -) direction is right. - hen the battery chamber W cover is open do not force the battery chamber cover, this may damage it.
Inserting the memory card
Insert the memory card as shown.
- urn off the cameras power T before inserting the memory card. - ave the front label of the H memory card facing toward the front of the camera (Lens) and the card pins toward the back of the camera (LCD monitor). - o not insert the memory card D the wrong way around. Doing so may damage the memory card slot.
There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator Battery status
The battery is fully charged Low battery Low battery Battery empty capacity capacity (Recharge (Prepare to (Prepare to or use spare recharge or use recharge or use battery) spare battery) spare battery)
W hen using the camera and the battery in a place that is excessively cold or hot, the battery status on the LCD may be different from the actual battery status.
Instructions on how to use the memory card
e sure to format the memory card (see p.53) if you are using a B newly purchased memory card for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. urn off the camera power whenever the memory card is being T inserted or removed. epeated use of the memory card will eventually reduce the R memory cards performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. he memory card is an electronic precision device. T Do not bend, drop or subject the memory card to any heavy impact. o not store the memory card in an environment with strong D electronic or magnetic fields, e.g. near loud speakers or TV receivers. lease do not use or store in an environment where there are P extremes in temperature. o not allow the memory card to become dirty or to come into D contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. uring and after periods of extended use, you may notice that the D memory card is warm. This is perfectly normal. o not use a memory card that is used in another digital camera. D To use the memory card in this camera, format the memory card before using this camera. o not use a memory card formatted by another digital camera or D memory card reader. f the memory card is subjected to any of the following, the I recorded data may become corrupted : - hen the memory card is used incorrectly. W - f the power is switched off or the memory card is removed while I recording, deleting (formatting) or reading. amsung cannot be held responsible for lost data. S t is advisable to copy important data onto other media as backup e.g. I hard disks, CD etc. f there is insufficient memory available : I A [Memory Full] message will appear and the camera will not operate. To optimize the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.

Right/OK button

3. Select a desired menu by pressing the Up / Down button and then press the OK button.
Photo Size Quality EV ISO White Balance Face Detection Focus Area Exit Back Exit Photo Size Quality EV
3648X 3648X 3584X 3072X 2560X 2048X 1024X 768

Up / Down button

ISO White Balance Face Detection Focus Area Back Photo Size Set the photo size. Movie Size Set the video size.
4. Select a desired menu by pressing the Left / Right button and then press the OK button.

[ Still image mode ]

[ Movie mode ]
Adjust the white balance according to the light source. White Balance

Left / Right button

Appropriate for outdoor photography on a clear day. Daylight
T he higher the resolution, the lower the number of shots
available because high resolution images require more memory.

Quality / Frame rate

Exposure compensation
This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the [EV] menu. Compensating Exposure 1. Click the Up/Down button from the Shooting menu to select [EV] ( ). 2. Use the Left and Right buttons to EV Set exposure value to adjust brightness. set the desired exposure compensation factor. 3. Press the OK button. The value you Back Move set will be saved and the Exposure Compensation setup mode will be closed. If you change the exposure value, the exposure indicator ( ) will be displayed on the left of the LCD monitor. A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Mode Icon Sub menu Super Fine File Format jpeg Fine jpeg Normal jpeg 30 FPS avi 15 FPS avi STILL IMAGE mode MOVIE mode
Quality Adjust the image quality.
Frame Rate Set the number of frames per second for movies.
This file format complies with the DCF (Design rule for Camera JPEG (Joint Photographic Experts Group) :

File system).

JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the files efficiently.

White balance

The white balance control allows you to adjust the colors to appear more natural.
You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers. [Auto] : he camera's sensitivity is T automatically changed by variables such as lighting value or subject brightness.

Adjust face detection settings. Face Detection
2. Press the shutter button halfway. The focus frame turns to green when the focus is activated. 3. Press the shutter button fully to take a picture. 041
elf Portrait S W hen taking pictures of yourself, the area of your face is automatically detected so that you can take self pictures more easily and quickly. Selectable modes: rogram, DIS, Photo Help Guide, P Beauty Shot, Portrait, Beach & Snow 1. or self-filming, set the camera lens F towards the face of the object. It automatically detects the face of the object, and emits a guiding sound. 2. tart filming by pressing the shutter S button.
This function can detect up to 10 persons. hen the camera recognizes many people at the same time, W it will focus on the nearest person. The Digital zoom is not activated in this mode. hen the camera detects a target face, the white color focus W frame will be displayed over the target face and the grey color focus frame appears over the remaining faces. Press the shutter button halfway down to focus on the face and the white focus frame turns green. Return to previous AF mode if face detection was failure. In some conditions this function cannot work properly. - When a person wears dark glasses or some part of the face is hidden. - When the person being taken does not look at the camera. - Camera doesn't detect a face as the brightness is too dark or too bright. - The distance between the camera and object is far. The maximum available Face Detection range is 2.5m (Wide). he nearer the subject, the faster the camera can recognize T the subject. n [Beauty Shot], [Portrait], and [Children] mode, the I [Face Detection] function setting is set to its default value.
hen locating the face in the center of the screen, it W repeatedly emits a faster sound unlike the sounds that are emitted when the face is not in the center.

mile Shot S

Face Tone
This menu allows you to control the skin tone in images in beauty shot mode. The higher the level you select, the brighter the skin tone. 1. elect [Face Tone] by pressing the S Up/Down button. 2. Select a desired face tone by pressing the Left / Right button and then press the OK button. 3. ress the Shutter button to take an P image.

Back Back Set

AF sound
If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status. - [AF sound] sub menus : [Off], [On]*
Volume Start Sound Shutter Sound Beep Sound AF Sound :Medium :Off :1 :1 Off :On On Back Set

Display (

Language
There is a choice of language that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved.
Language Function Description Start Image Display Brightness Quick View Power Save Back :English English :On :Off Franais Deutsch :Auto Espaol :0.5sec Italiano :Off Set

Function Description

You can select whether the function description can be displayed on the window in recording mode. - unction Description sub menus F [Off] : he function description T function cant be activated. [On]*: he name and description of the T option is displayed.

:English

Start Image Display Brightness Quick View Power Save

Off On

:Off :Auto :0.5sec :Off

Start up image

Quick View
I f you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. - ub menus S [Off] : he quick view function cant T be activated. [0.5 sec]*,[1 sec], [3 sec] : he captured image is briefly T displayed during the selected time.
You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. - Sub menus : [Off]*, [Logo], [User Image] - se a saved image for the start-up image U with the [Start Image] in the [Resize] menu in the play mode. - he start-up image will not be deleted by T [Delete] or [Format] menu. - he user images will be deleted by [Reset] T menu.
Language Function Description Start Image Display Brightness Quick View Power Save Back Set :English :On :Off

OFF :Auto

:0.5sec :Off
Language Function Description Start Image Display Brightness Quick View Power Save Back
:English :On :Off Off :Auto 0.5sec :0.5sec 1sec:Off 3sec Set

Display Brightness

You can adjust the LCD brightness. - Sub menus : [Auto]*, [Dark], [Normal], [Bright]
Language Function Description Start Image Display Brightness Quick View Power Save Back :English :On :Off Auto:Auto Dark:0.5sec Normal :Off Bright Set

Display Save

I f you set the [Power Save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. - Sub menus [Off]*: he LCD monitor will not be turned T off. [On] : If the camera isn't operated during the specified time (about 30 SEC.), the camera power will be idle (Camera status lamp:Blinking) automatically.

1. Select the recorded movie clip that you want to play back by using the Left / Right button. 2. ress the OK button to play back a movie P clip file. - o pause a movie clip file while playing T it back, press the OK button again. - ressing the OK button again will cause the movie clip file to P restart. - o rewind the movie clip while it is playing, press the Left button. T To fast forward the movie clip, press the Right button. - o stop playback of the movie clip, press the OK button, and T then press the Left or Right button.

Play Capture

Playing back a still image
1. elect the Play mode by pressing S the play mode button ( g ).
2. he last image stored on the T memory is displayed on the LCD monitor. 3. elect an image that you want to S view by pressing the Left / Right button. ress and hold the Left or Right P button to play back the images quickly. 058
Movie clip capture function
You can capture still images from the movie clip. How to capture the movie clip 1. ress the OK button while playing the P movie clip. Then press the Down button. 2. he paused movie clip is saved as a T new file name. he captured movie clip file is the T same size as the original movie clip (640x480, 320x240). hen you press the down button at W the beginning of the movie clip, the first frame of the movie clip will be saved as a still image.
Playing back a recorded voice
1. elect the recorded voice that you want S to play back by using the Left / Right button. 2. ress the OK button to play back a P recorded voice file. Play - o pause a recorded voice file, while T playing it back, press the OK button again. - o resume playback of the voice file, press the OK button. T - o rewind the voice file while it is playing, press the Left button. T To fast forward the voice file, press the Right button. - o stop playback of the voice memo, press the Down button. T

[Paused]

Playing back a voice memo
1. elect a still image that has the voice S memo. 2. ress the OK button to play back the P voice memo. - o pause the voice memo, while T playing it back, press the OK button again. - resume playback of the voice memo, To press the OK button.

LCD monitor Indicator

The LCD monitor displays shooting information about the displayed image.
No. 13 Description Playback mode Voice Memo DPOF Protect Folder name & File name Memory indicator Battery ISO Aperture value Shutter speed Flash Photo Size / Movie Size Recording date 80~1600 F3.5 ~ F~ 1/2,000 On/Off 3648x2736 ~ 320x240 2010/01/01 100-0010 Icon Page p.58 p.74 p.75 p.73 p.54 p.15 p.40 p.33 p.38 p.54

It is possible to add various effects to your images by using this function. 1. Press the play mode button and press the MENU button. 2. Click the Up / Down button from the Edit menu to select [Photo Style Selector] ( ) menu tab and press the OK button. 3. Select a desired sub menu by pressing the Left / Right button and press the OK button.

Style mode Normal

After using [Edit] feature, the edited image will be saved as a smaller size than the original image. (Only with image size from 7M)

Rotating an image

You can rotate the stored images by various degrees. 1. ress the play mode button and press P the MENU button. 2. lick the Up / Down button from the C Edit menu to select [Rotate] ( ) menu tab and press the OK button. 3. elect a desired sub menu by pressing S the Left / Right button and press the OK button.

Right 90 Left 90

Rotate
Description No style effect is applied. Soft style is applied. Vivid style is applied. Forest style is applied. Sepia style is applied. Cool style is applied. Calm style is applied. Black & white effect is applied. Negative effect is applied. Define an RGB tone to create your own photo style.

Soft Vivid

[ : Right 90] : Rotate picture in a clock-wise direction

Horizontal

[ : Left 90] [ : 180] : Rotate picture in a : otate picture 180 R counter-clock-wise direction degrees

Vertical

Forest Retro Cool Calm Classic

Negative Custom RGB

f you display the rotated image on the LCD monitor, empty I spaces may appear to the left and right of the image. 068
[ : Horizontal] : Rotate picture horizontally
[ : Vertical] : Rotate picture vertically
4. The changed image is saved as a new file name.
ed eye Removal R Red eye effect can be removed from the captured image. 1. Select ( < ) by pressing the Left / Right button and press the OK button. 2. The [Making New Image] message is displayed and the image is saved as a new file name.
ustom RGB C You can change the R (Red), G (Green) and B (Blue) values of the image. - OK button : Select / setup the Custom Color - Up / Down button : Selects R, G, B - Left / Right button : Change the values

Red-eye Fix

1. Press the play back button and press the MENU button. 2. lick the Up / Down button from the Edit menu to select C [Image Adjust] ( ) menu tab and press the OK button. CB A You can automatically adjust the brightness of the dark area, caused by under exposure to the light source. 1. Select ( ) by pressing the Left / Right button and press the OK button. 2. The [Making New Image] message is displayed and the image is saved as a new file name.

Start the Multi Slide Show
The Multi Slide Show can start only in the [Start] menu. 1. se the Up / Down button to select the [Start] menu and press U the Right button. 2. elect a desired sub menu by pressing S the Up / Down button. [Play] : he Multi Slide Show is T closed after one cycle. [Repeat]: he Slide show is repeated T until cancelled.
Start Images Effect Interval Music Play :All Repeat :Off :1 sec :Off
3. ress the OK button and the slide show will be started. P - o pause the slide show while playing it back, press the OK T button again. - ressing the OK button again will cause the Multi Slide Show P restart. - o stop playback of the Multi Slide Show, press the OK button, T and then press the Left or Right button.
Music :Off 2. Select a desired sub menu by pressing the Up / Down button. Back Set [All] : images saved on the All memory are played back. Press the OK button and the settings are saved. [Date] : mages taken in a specified date are played back. I Press the OK button and the settings are saved. [Select] : lay only the selected images. If you press the Up / P Down button, you can select the desired images to play back. The selected image can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically. You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button and the settings are saved.
3. elect [Play] or [Repeat] in the [Start] menu to start the multi slide S show.
Configure Multi Slide show effects

Setting play interval

Set the Multi Slide Show play interval.
Off :All Calm :Off Sweet :1 Rural sec Vivid :Off Lively
Unique screen effects can be used for the Multi Slide Show. 1. Select the [Effect] sub menu by pressing the Up / Down button and press the Right button. 2. Use the Up / Down button to select the type of effect. 3. Press the OK button to confirm the setting.
Start Images Effect Interval Music
1. Select the [Interval] sub menu by pressing the Up / Down button and press the Right button. 2. Use the Up / Down button to select the desired interval. 3. Press the OK button to save the configuration.
Start Images Effect Interval Music :All :Off 1 sec sec :sec :Off 5 sec 10 sec Back Set
The loading time depends on the image size and quality. While the Multi Slide Show is playing, the Movie clips and voice
T he interval menu functions only when the Effect is set to [Off].
recording files will not display.

Setting Background Music

Set the Multi Slide Show music. 1. Select the [Music] sub menu by pressing the Up / Down button and press the Right button. 2. Use the Up / Down button to select the desired Music. 3. Press the OK button to save the configuration.

This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy to Card] menu tab by pressing the Up / Down button. And then press the Right button.
Delete Protect Voice memo DPOF :Off
Copy to Card 2. Select a desired sub menu by pressing Yes No the Up / Down button and press the OK Back Set button. - [Yes]: ll images, movie clips and voice recording files saved A in the internal memory are copied to the memory card after the [Copying] message is displayed. After copying has been completed, the screen will return to play mode. - [No] : Cancels "Copy to Card".

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. etting up the camera for connection to the printer S 1. onnect the camera and printer with USB cable. C 2. nce the camera is turned on, the camera automatically recognizes O the printer and is connected to it. f automatic connection fails, set the [USB] menu to [Printer]. (p.57) I or a printer that can enable removable disk, set the [USB] menu to F [Printer]. Easy printing hen you connect the camera to printer W in the Play back mode, you can print a picture easily. - Pressing the Left / Right button : Selects a previous / next image. - Pressing the OK button : Currently displayed image will be printed with the printers default settings.
Connecting the Camera to a Printer
PictBridge : Picture Selection
You can select images you want to print. Setting the Number of Copies to Print 1. Press the MENU button and the Images :One Photo One Photo PictBridge menu will display. Size All:Auto Photos 2. Use the Up / Down button to select the Layout :Auto [Images] menu and press the Right Type :Auto button. Quality :Auto 3. Use the Up / Down button to select a Back Set desired sub menu and press the OK button. - Select [One Photo] or [All Photos]. A screen where you can set the number of copies to print will appear as shown below.
PictBridge : Print Setting
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print and File Name Print menus for printed pictures. 1. ress the MENU button and the P PictBridge menu will display. 2. se the Up / Down button to select U the desired menu, and then press the Right button. 3. se the Up / Down button to select U the desired sub menu value, and then press the OK button.

Menu Size Function Set the size of the printing paper Set the number of pictures to be printed on a sheet of paper Set the quality of the printing paper Set the quality of the picture to be printed Set whether to print the date Set whether to print the file name
Images Size Layout Type Quality Back :One Photo Auto :Auto Postcard Card :Auto 4x6 L :Auto 2L :Auto Set
Sub menu Auto, PostCard, Card, 4X6, L, 2L, Letter, A4, A3 Auto, Full, 1, 2, 4, 8, 9, 16, Index Auto, Plain, Photo, Fast Photo Auto, Draft, Normal, Fine Auto, Off, On Auto, Off, On

Layout

Quantity Set Quantity Set
[When [One Photo] is selected]
[When [All Photos] is selected]
Type Quality Date File Name
- Press the Up / Down button to select the number of prints. - hen [One Photo] is selected : se the Left / Right button to W U select another picture. After selecting another picture, select the number of prints for another picture. - fter setting the number of prints, press the OK button to save. A - ress the Shutter button to return to the menu without setting P the number of prints. 4. Press the play mode button ( g ) and images will be printed.
S ome menu options are not supported on all printers.
If not supported, the menus are still displayed on the LCD, but are not selectable.

PictBridge : Reset

Initializes user-changed configurations. 1. Use the Up / Down button to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down button to select the desired sub menu and then press the OK button.
Date File Name Reset :Auto :Auto No Yes No

Important notes

Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - reas exposed to severe changes in temperature and humidity. A - Areas exposed to dust and dirt. - reas exposed to direct sunlight or the inside of a vehicle in hot A weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials. Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothballs), high temperature and high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time. Sand can be particularly troublesome to cameras. - o not let sand get inside the camera when using it on beaches, D coastal dunes, or other areas where there is lots of sand. - oing so may result in failure or may permanently render the D camera unusable. Handling the camera - ever drop the camera or subject it to severe shocks or vibrations. N - rotect the large size LCD monitor from an impact. When this P camera is not used, keep it in the camera case. - void obstructing the lens or the flash when you capture an image. A - his camera is not waterproof. T To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - f you use this camera in wet places, such as beach or pool, do I not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.

If [Yes] is selected : ll print and image A settings will be reset. If [No] is selected : ettings will not be reset. S Default print setting varies depending on the printer manufacturer. For your printers default setting, refer to the users guide that came with your printer.
Extremes in temperature may cause problems. - f the camera is transferred from a cold to a warm and humid I environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed. Caution on Using the Lens - f the lens is subjected to direct sunlight, it could result in the I discoloration and deterioration of the image sensor. - ake care not to get fingerprints or foreign substances on the T surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time. If the camera is exposed to electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - se a soft brush (available from photo stores) to gently clean the U lens and LCD assemblies. If this does not work, lens cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use. Do not attempt to disassemble or modify the camera. Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction. When images are uploaded or downloaded, the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again. Before an important event or going on a trip, you should check the camera condition. - ake a picture for testing the camera condition and prepare extra T battery. the digital camera is not used for a long period, the date and If time may adopt the default settings by automatical battery discharged. In this case, reset the date and time correctly before the recording. 081

Warning indicator

There are several warnings that may appear on the LCD display. [Card Error] Memory card error Turn off the camera power and turn it on again Insert the memory card again Insert and format the memory card (p.53) [Card Locked] The memory card is locked SD/SDHC memory card : lide the write protect switch to the S top of the memory card [Memory Full] The memory card or internal memory is full Insert new memory card Delete unnecessary image files [No Image File] There are no images stored on the memory Take images Insert a memory card that is storing some images [File Error] File error Delete the file Memory card error Contact a camera service center [Low Battery] There is low battery capacity Insert fresh battery

Samsung Eco-mark

It is Samsungs own symbol mark is used to effectively communicate Samsungs environmental friendly product activities to the consumers. The mark represents Samsungs continuous effort on development of environmental conscious products.