SyncMaster 713BM/913TM has an amazing color calibration system and give you perfect performance everytime. With multimedia speaker, the powerful performance is given, whether its for game, surfing the internet, your professional working environment.

SyncMaster 713BM/913TM

Samsung LCD Monitor

Features

Innovative Design

- 713BM(913TM)

Specifications Class
Panel Viewable Area Pixel Pitch Brightness Contrast Ratio Viewing Angle (H/V)* Response Time * Frequency Horizontal Frequency Vertical Frequency

SyncMaster 713BM

17" 0.264 mm 300 cd/m2 600:1 160o / 160o (CR>5) 8 ms 30~81 kHz 56~75 Hz 1280x1024 16.2 Mil. Separate H/V, Composite, SOG 15pin D-sub, DVI-D DDC 2B 38 Watts (Max.) <1 Watt Built-in 1Wx2Ch VESA 100mm TCO'99 Sliver

SyncMaster 913TM

19" 0.294 mm 250 cd/m2 1000:1 170o / 170o 8 ms

(G to G)

Ultra Narrow & Slim Design Clean & Simple Front View Lightest Weight 5.8kg (7.2kg)
High Performance - 713BM(913TM)
Dual Interface Superior Image Quality - Contrast 600:1 (1,000:1) - Brightness 300cd/m2 (250cd/m2)
Wide Viewing Angle 160 /160 (170 /170 )
Maximum Resolution Color Supported Signal Input Input Video Signal Sync. Type Input Connectors Plug & Play Power On Mode DPMS Mode Type Multimedia Speakers Wall-Mount TCO Cabinet Color Dimension Set (WxHxD) (with stand) Set (WxHxD) (without stand) Packing (WxHxD) Weight Set (kg) Packing (kg) Special Features Stand Type Function

16.7 Mil.

MagicTune
Mouse-operated OSD control software Color calibration for accurate color images Asset Management
Analog RGB, DVI Digital Link : TMDS

42 Watts (Max.)

MagicBright
Provides 4 Modes for Optimum Display -Text, Internet, Entertain and User Adjustment Mode

MagicSpeed

Fast Response Time of 8 ms

TCO'03

Ergonomics & Easy Operation

TCO03 Certified

HAS : 370x404x200 (mm) Simple : 370x386.7x195.3 (mm) 370x342.3x64.1 (mm) HAS : 508x431x235 (mm) Simple : 451x440x140 (mm) 5.8 kg 8 kg MagicBright, Mechanical Switch HAS / Simple
416.6x420.6x200 (mm) 416.6x377.5x64.2 (mm) 526x469x235 (mm) 7.2 kg 9 kg
Tilt -3 ~ 22 & Height Adjustable Clean Cable Arrangement Down Scaling up to UXGA (1600x1200) Economical Energy Saving - Display Power Management Signaling (DPMS) - Uses less than 1W in Stand-by Mode Wall and Arm Mountable (VESA 100mm)
MagicTune, Safe Mode (Down Scaling in UXGA) HAS
HAS : Height Adjustable(80mm), Swivel, Pivot

Dimensions

370/416.6
713BM(HAS)/913TM - unit : mm 64.1/64.2

404/420.6 200/200

SyncMaster T200HD/T220HD

LCD Monitor

User Manual

Safety Instructions

Notational
Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.

Notational Conventions

Prohibited
Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock

Do not disassemble

Do not touch
When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. Otherwise, this may result in electric shock or fire.
Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. Otherwise, it may result in electric shock or personal injury.
Ensure that the power plug is plugged into the power outlet firmly and correctly. Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place any heavy material on it. Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. Otherwise, this may cause fire due to overheating.
Do not disconnect the power cord while using the product. Otherwise, this may result in damage to the product due to electric shock.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. This may cause electric shock or fire.
Use only the power cord provided by our company. Do not use the provided power cord of another product. Otherwise, this may result in fire or electric shock.

Installation

Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Do not drop the monitor when moving it. This may cause damage to the product or the person carrying it.
Ensure that at least two persons lift and move the product. Otherwise, it may be dropped and cause personal injury, and/or damage the product.
When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out. Otherwise, it may fall or cause personal injury. Use a cabinet or rack of a size appropriate to the product.
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT. Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the product as possible. Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase or closet. Otherwise, this may result in fire due to an increase in the internal temperature. Put down the monitor carefully. Failing to do so may damage the monitor.
Do not place the front of the product on the floor. Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall mount. Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall. Otherwise, it may result in fire due to an increase in the internal temperature.
Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in. If rainwater enters the product, it may result in electric shock or fire. Install the antenna far away from any high voltage cables. If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire. Ensure that the packaging vinyl is kept away from children. Otherwise, it may result in serious harm (suffocation) if children play with it.

Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
Click "Have Disk. and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK".
Select the model that matches your monitor from the list of monitor models on the screen, and click "Next".
10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence.
Microsoft Windows XP Operating System
Using the Software 1. 2. Insert CD into the CD-ROM drive. Click "Start" "Control Panel" then click the "Appearance and Themes" icon.
Click "Display" icon and choose the "Settings" tab then click "Advanced.".
Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
Click "Update Driver." and select "Install from a list or." then click "Next" button.
Select "Don't search, I will." then click "Next" and then click "Have disk".
Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button.
If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually.
10. Monitor driver installation is completed. Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. 2. 3. Choose "OK" button on the "Insert disk" window. Click the "Browse" button on the "File Needed" window. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install 1. 2. 3. 4. Click "Start", "Setting", "Control Panel". Double click the "Display" icon. Select the "Settings" tab and click "Advanced Properties" button. Choose "Monitor". Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps continually. 5. 6. 7. 8. 9. Click "Driver" and then click on "Update Driver." then click on the "Next" button. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk". Click the "Browse" button then choose A:(D:\Driver). Click the "Open" button, then click "OK" button. Choose your monitor model and click the "Next" button then click "Next" button.

10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware.
Natural Color Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images. For more information, refer to Help (F1) in the software program.
How to install the Natural Color software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the [Start] button of Windows and then select [Run.]. Enter D:\color\NCProSetup.exe and then press the [Enter] key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.)
How to delete the Natural Color software program
Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select Natural Color from the list and then click the "Add/Delete" button.

Adjusting the Monitor

Picture Available Modes
PC / DVI TV Component HDMI Note The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.
Picture : PC / DVI MagicBright
MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: Entertain, Internet, Text, Dynamic Contrast and Custom. Each mode has its own pre-configured brightness value. Entertain High Brightness For watching motion pictures such as a DVD or VCD Internet For working with a mixture of images such as texts and graphics. Text For documents or works involving heavy text. Dynamic Contrast

Adjusting the Monitor Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the Brightness and Contrast by using the OSD menu. MENU , MENU,EXIT
Contrast / Brightness / Sharpness
(Not available in MagicBright mode of Dynamic Contrast.)
You can use the on-screen menus to change the contrast and brightness according to personal preference. Contrast : Adjust the Contrast. Brightness : Adjust the Brightness. Sharpness : Adjust the Sharpness. , , , , MENU,EXIT

Auto Adjustment

The values of Fine, Coarse and Position are adjusted automatically.
Adjusting the Monitor By changing the resolution in the control panel, auto function is performed. (Available in PC Mode Only) MENU , MENU,EXIT
Screen : (Available in PC mode only) - Coarse / Fine
Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.
Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

MENU,EXIT

- Position
Adjusts the screen location horizontally and vertically. MENU , , , , , MENU,EXIT

- Image Reset

Image parameters are replaced with the factory default values. MENU , , MENU,EXIT

- Resolution

Displays the resolution set on the PC.
Picture Options - Color Tone
Adjusting the Monitor The tone of the color can be changed. (Available in PC / DVI mode only) Cool / Normal / Warm / Custom MENU , , MENU,EXIT
- R-Gain / G-Gain / B-Gain
Adjusts the individual R, G, B color controls. MENU , , , , , MENU,EXIT

- Size

You can switch the Size. Wide / 4:3 MENU , , , MENU,EXIT
Picture parameters are replaced with the factory default values. OK Cancel , , MENU,EXIT
Picture : TV / Component / HDMI Mode
The Monitor has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset at the factory. You can activate either Dynamic, Standard, or Movie. Dynamic Selects the picture for high-definition in a bright room. Standard Selects the picture for optimum display in a normal environment. Movie Selects the picture for viewing movies in a dark room.

Channel List

You can manage the channels.

MENU , MENU,EXIT

Note All selected channels will be shown on Added menu. , , , ,

MENU , MENU,EXIT

Favorite
Note Only memorized channels can be set as favorite channels. All favorite channels will be shown in the Favorite menu. , , , ,
If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required. (Available in Analog TV Mode Only) MENU , , , , , , , MENU,EXIT

Fine Tune

Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly. (Available in Analog TV Mode Only) MENU , , , , MENU,EXIT

Signal Strength

Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. (Available in Digital Cable TV Mode Only) MENU , , MENU,EXIT

Setup Available Modes

Plug & Play
You can manage the entire configuration. MENU , , , , , MENU,EXIT , , , , ,

Language

You can choose one of 3 languages.
The language chosen affects only the language of the OSD. MENU , , MENU,EXIT

Time Clock

You can set the current time.

- Clock Mode

Auto / Manual MENU , , , MENU,EXIT

- Clock Set

Note Clock Set are available only when Clock Mode set to Manual. MENU , , , , , , MENU,EXIT

CC2 : The Special Non-Synchronous Use Captions. This channel carries data that is intended to augment information carried in the program.
CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions.
CC4 : Special Non-Synchronous Use Captions. Similar to CC2. Text1 : First Text Service. This may be various non-program related data. Text2 : Second Text Service. Additional data, usually not program related. Text3 / Text4 : Third and Fourth Text Services. These data channels should be used only if Text1 and Text2 are not sufficient.

Digital Caption Options

Size Default, Smart, Standard, Large
Font Style Default, Style0, Style1, Style2, Style3, Style4, Style5, Style6, Style7
Foreground Color Default, White, Black, Red, Green, Blue, Yellow, Magenta, Cyan
Background Color Default, White, Black, Red, Green, Blue, Yellow, Magenta, Cyan
Foreground Opacity Default, Transparent, Translucent, Solid, Flashing
Background Opacity Default, Transparent, Translucent, Solid, Flashing
Return to Default , , , , MENU,EXIT

MENU Note

Digital Caption Options are available only when Service1~Service6 can be selected in Caption Mode. Service1~Service6 in digital caption mode may not be available depending on the broadcast.

Melody

A melody sound can be set to come on when the monitor is powered On or Off. Off : Turns off the melody function. Low : Sets the melody volume to low. Medium : Sets the melody volume to medium. High : Sets the melody volume to high. , , , MENU,EXIT

Light Effect

You can turn on/off the LED on the front of monitor according to the situation. Use it for saving power or when the LED dazzles your eyes. Off : LED will not come on. In Standby : Turns the LED on in standby mode. In Watching TV : Turns the LED on while watching TV. Always : LED is always on. , , , MENU,EXIT

Light Level

Use to adjust the light level i.e., the brightness of the light. MENU , , , MENU,EXIT

Energy Saving

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption. Off : Turns off the energy saving function. Low : Sets the TV to low energy saving mode. Medium : Sets the TV to medium energy saving mode. High : Sets the TV to high energy saving mode. , , , MENU,EXIT

Troubleshooting Q: Picture image is unstable and vibrates. Ghost images are shown in the picture. A: Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor.If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. The image is too light or too dark Adjust the Brightness and Contrast.(Refer to the Brightness, Contrast) The Power Indicator blinks. The monitor is currently saving the changes made in settings to the OSD memory. The screen is blank and the power indicator light blinks every 0.5 or 1 seconds. The monitor is using its power management system. press a key on the keyboard. The screen is blank and is blinking. If you see the "TEST GOOD" message on the screen when you press the MENU button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected.
Q: A: Q: A: Q: A: A: Q: A:
3. Problems related to Audio
Note Problems related to audio signals and their solutions are listed below. Q: A: A: Q: A: A: No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.(Refer to the Connecting the monitor) Check the volume level.(Refer to the Volume) The sound level is too low. Check the volume level.(Refer to the Volume) If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
4. Problems related to Remote Control
Note Problems related to the remote control and their solutions are listed. Q: A: A: A: The remote control buttons do not respond. Check the battery polarities (+/-). Check if the batteries have been exhausted. Check if the power is on.
Troubleshooting A: A: Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity
5. You may see small particles if you look closely at the edge of the bezel surrounding the screen.
This is part of the products design and is not a defect.

Q&A

Q: A: A: Q: A: How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjusts the resolution? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Settings. A: Windows ME/2000: Set the resolution in the Control Panel Display Settings. * Contact the video card manufacturer for details. Q: A: How can I set the Power Saving function? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: A: How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the monitor. Q: A: What are the benefits of digital broadcasting? Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog TV broadcasting does. As services develop, you can also enjoy various information services because various kinds of data besides video and audio can be sent. For example, while watching a sports game, you can view various data on your favorite player or you can view all or selected screens which have been captured from different angles for a

Troubleshooting A: If a cable broadcasting company is sharing a common broadcasting facility for your apartment or tenement house, it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility.

Specifications

General
General Model Name LCD Panel Size Display area Pixel Pitch Synchronization Horizontal Vertical Display Color 16.2M Resolution Optimum resolution Maximum resolution 1680 x 1050 @ 60 Hz 1680 x 1050 @ 60 Hz 30 ~ 81 kHz 56 ~ 75 Hz 20 inch (51 cm) 433.44 mm (H) x 270.9 mm (V) 0.258 mm (H) x 0.258 mm (V) SyncMaster T200HD
Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) 0.7 Vp-p 5 % separate H/V sync, Composite TTL level (V high 2.0 V, V low 0.8 V) Maximum Pixel Clock 146.250 MHz (Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz 3 Hz Signal Cable 15pin - to - 15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight 486 x 350 x 86 mm / 19.1 X 13.8 X 3.4 inch (Without Stand) 520 x 441.5 x 215 mm / 20.5 X 17.4 X 8.5 inch (With Stand) / 6.0 kg / 13.2 Ibs Environmental considerations Operating Temperature : 50 F ~ 104 F (10 C ~ 40 C)
Environmental considerations Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4 F ~ 113 F (-20 C ~ 45 C) Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 5,292,000.

General Model Name LCD Panel Size 22 inch (55 cm) SyncMaster T220HD
LCD Panel Display area Pixel Pitch Synchronization Horizontal Vertical Display Color 16.2M Resolution Optimum resolution Maximum resolution 1680 x 1050 @ 60 Hz 1680 x 1050 @ 60 Hz 30 ~ 81 kHz 56 ~ 75 Hz 473.76 mm (H) x 296.1 mm (V) 0.282 mm (H) x 0.282 mm (V)
Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) 0.7 Vp-p 5 % separate H/V sync, Composite TTL level (V high 2.0 V, V low 0.8 V) Maximum Pixel Clock 146.250 MHz (Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz 3 Hz Signal Cable 15pin - to - 15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight 520 x 373.5 x 86.5 mm / 20.5 X 14.7 X 3.4 inch (Without Stand) 520 x 441.5 x 215 mm / 20.5 X 17.4 X 8.5 inch (With Stand) / 6.2 kg / 13.7 Ibs Environmental considerations Operating Temperature : 50 F ~ 104 F (10 C ~ 40 C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4 F ~ 113 F (-20 C ~ 45 C) Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor
Plug and Play Capability settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 5,292,000. Note Design and specifications are subject to change without prior notice. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

Information

For Better Display
Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-LCD. Resolution: 1680 x 1050 Vertical frequency (refresh rate): 60 Hz
TFT-LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one millionth) and above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 5,292,000.
When cleaning the monitor and the panel outside, please apply the recommended small amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly. If excessive force is applied, you may stain it. If you are not satisfied with the picture quality, you can get better quality of picture by performing the "Auto Adjustment function" in display screen that is appeared as window termination button is pressed. If there's still noise after the automatic adjustment, use the Fine/Coarse adjustment function. When viewing a fixed screen for an extended period of time, a residual image or blurriness may appear. Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time. Do not display a still image( such as on a video game or when hooking up a DVD to this LCD_TV ) on the Color TFT-LCD ( Thin Film Transister Liquid Crystal Display) panel for a long time as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of this screen when displaying a still image. Watching Digital Broadcasting Correctly Digital 16:9 HD Broadcasting Screen Digital SD Broadcasting Screen Digital 4:3 Broadcasting Screen
This screen is shown when This screen is shown when This screen is shown when scenes are captured using dig- scenes are converted to ana- scenes created via analog sigital broadcasting equipment log broadcasting signals benals are displayed while fore being sent. Humans and
Information and they are sent in HDTV objects appear heavier than in watching HDTV broadcast(16:9) mode. reality. ing. Note If temporary stops, mosaic screens, or jagged screens occur, this is not a TV problem. Contact your cable broadcasting company for a check-up. For information on how to connect and use your video, DVD, DVD combo, home theater, PC, etc., refer to their respective user manuals.

HONG KONG INDIA

3698 - 110011
http://www.samsung.com/hk http://www.samsung.com
INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND
0800-112-8888 0120-327-527 1800-88-SAMSUNG(726-7864) 1800-SAMSUNG(726-7864) 1800-29-3232, 02-689-3232
http://www.samsung.com http://www.samsung.com/jp http://www.samsung.com/my http://www.samsung.com/nz http://www.samsung.com http://www.samsung.com
1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph
Asia Pacific TAIWAN VIETNAM 0800-329-889 Middle East & Africa SOUTH AFRICA TURKEY U.A.E 0860-SAMSUNG(726-7864) 11 800-SAMSUNG(726-7864) 8000-4726 http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com/tw http://www.samsung.com
Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Separate Composite

Types of Sync Signals

This is a scheme of transmitting individual vertical and hori sync signals to the monitor.
This is a scheme of combining vertical and horizontal syn nals into one composite signal and transmitting it to the mo The monitor displays the color signals by separating the co site signal into original color signals.

Dot Pitch

The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.

Vertical Frequency

Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. This number shows the ac-

Interlace Methods

Non-Interlace

Resolution

Appendix curacy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen. Example: If the resolution is 1680(1920) x 1050(1200), this means the screen is composed of 1680(1920) horizontal dots (horizontal resolution) and 1050(1200) vertical lines (vertical resolution). RF Cable Satellite Broadcasting Cable TV A round signal cable generally used for TV antennas. Balances the levels of the sound coming from each speaker in televisions with two speakers. Whereas the terrestrial broadcasting is delivered via frequency signals through the air, cable broadcasting is transmitted via a cable network. In order to view cable TV, one must purchase a cable receiver and hook it up to the cable network. "CATV" refers to the broadcasting service offered at hotels, schools and other buildings through their own broadcasting system, apart from VHF or UHF broadcasting by terrestrial broadcasters. The CATV programs may include movies, entertainment and educational programs. (Different from cable TV.) CATV can be viewed only within the area in which the CATV service is offered. VHF/UHF Channel Fine Tuning VHF indicates TV channels 2 to 13, and UHF indicates channels 14 through 69. This feature allows the viewer to fine-tune the TV channel to obtain the best viewing conditions. The Samsung LCD TV has both automatic and manual channel fine-tuning features to enable the viewer to adjust their desired settings. External device input refers to video input from such external video devices as VCRs, camcorders and DVD players, separate from a TV broadcast. A type of digital disk technology that takes up only the benefits of CD and LD, to implement a high resolution/quality, which enables the user to enjoy clearer images. An enhanced broadcasting technology to process digital video signals using a set-top box, which implements a high resolution and clearer digital images on the screen. This derives from artificial satellite technology that amplifies weak signals even in poor reception areas for sharper images. A connection part that is used to link a Wide antenna cable (feeder cable) to the TV. A kind of language selection feature that provides English subtitles (caption) or character information services from broadcasting services (ex: AFKN) or video tapes (marked CC), and which are especially useful for studying English. This enables the user to enjoy the broadcasting service in both Korean and foreign (original) language as well as in stereo mode.

External Device Input

DTV Broadcasting (Digital TV Broadcasting) LNA (Low Noise Amplifier) Antenna Converter English Caption (= Caption Setting)

Multiplex Broadcasting

Appendix A2 BTSC This system uses two carriers to transmit voice data. Countries such as South Korea and Germany use this system. Broadcast Television System CommitteeThe stereo broadcasting system that is used in most of the countries that have adopted the NTSC system, including the United States, Canada, Chile, Venezuela and Taiwan. It also refers to the organization that has been organized to promote its development and management. Electronic Industries Association of Japan. DVI is the acronym for Digital Video Interface. It is a new type of video interface technology that provides the maximum screen quality for high quality display devices and high-end graphics cards including flat panel LCD monitors. This is an interface that connects both quality video signals and digital audio signals with a cable without any compression. HD (High Definition) In HD, 1080-line, 2x density beaming (1080i) is used. HD provides a five times clearer screen quality than the existing analog method and has a wide 16:9 aspect ratio. SD (Standard Definition) In HD, 480-line, double beaming (480i) is used. SD provides a screen quality somewhere between HD and the existing analog method. It exhibits a two times better screen quality than analog TV.

EIAJ DVI

HDMI(High Definition Multimedia Interface)

Correct Disposal

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Authority

Information in this document is subject to change without notice.
Appendix 2008 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.