FU-W28E

*Plasmacluster is a trademark of Sharp Corporation.

FU-W28E.eng.indd 1

08.11.13 3:45:50 PM

Free standing type

NEDERLANDS
LUCHTREINIGER GEBRUIKSAANWIJZING

FRANAIS

PURIFICATEUR D'AIR MANUEL D'UTILISATION

DEUTSCH

LUFTREINIGER BEDIENUNGSANLEITUNG

ENGLISH

AIR PURIFIER OPERATION MANUAL
Please read before operating your new Air Purifier
The air purifier draws in room air from its air intake, lets the air pass through an Active Carbon Filter (deodorization filter) and a HEPA Filter (dust collection filter) inside of the unit, then discharges the air from its air outlet. The air purifier unit repeats this process by moving its internal fan. As air passes through the HEPA filter if removes 99.97% of dust particles (as small as 0.3 microns.).The Active Carbon Filter gradually absorbs odour elements as they repeatedly pass through the filter. Some odour ingredients absorbed by the filters may become separated and may be discharged through the air outlet and result in additional odour. Depending on the usage environment, especially when the product is used in a condition significantly more severe than household use, this odour may become strong in a shorter period than expected. If the odour persist the filters should be replaced. Please purchase the optional replacement filter.
The air purifier is designed to remove air-suspended dust and odour, but not harmful gases (for example, carbon monoxide contained in cigarette smoke.) If the odour sources still exist, it cannot completely remove the odour. (for example, odours from construction materials and pet odours.) It is suggested to open the window a bit when you are smoking in order to facilitate ventilation.

Removable by filters

pollen, mite allergen, viruses, molds, dust, particles of cigarette smoke, pet dander
cigarette smoke odour, household odour (toilet / raw garbage / pet, etc.)

FU-W28E.eng.indd 2

"Plasmacluster" technology Plasmacluster technology uses plasma discharge to produce and release the same positive and negative ions as those found in nature ("Plasmacluster ions"). This is a unique air cleaning technology of the SHARP CORPORATION for breaking down and eliminating such potential allergens as the fecal matter or corpses of aerial mites*1, viruses *2 and mold and bacteria *3 suspended in the air, and has been substantiated by third-party organizations both in Japan and overseas. When there is a high density of Plasmacluster ions in the air, the smell of cigarette smoke trapped in curtains or sofas is eliminated in about 80 minutes, and when clothing is hung in a place exposed to the direct air expelled from the unit generating Plasmacluster ions, the smell of sweat is reduced to a virtually imperceptible level in one night (about 6 hours).
*1 Graduate School of Advanced Sciences of Matter, Hiroshima University, Japan Measurement of action on the potential allergens of aerial mites in (13m) *2 Retroscreen Virology, Ltd., London, UK Measurement of ratio of viruses eliminated from the air in a 1m box *3 Ishikawa Health Service Association, Japan Measurement of aerial mold and bacteria with an air sampler (13m) *4 Japan Spinners Inspecting Foundation, Japan Evaluation of deodorizing effect on odor-imbued fragments of cloth

FEATURES

CONTENTS
IMPORTANT SAFETY INSTRUCTIONS. E-2 WARNING... E-2 CAUTIONS CONCERNING OPERATION. E-3 INSTALLATION GUIDELINES.. E-3. FILTER GUIDELINES.. E-3 PART NAMES.. E-4 MAIN UNIT DISPLAY. E-4 ILLUSTRATIVE DIAGRAM.. E-4. BACK... E-5. INCLUDED.. E-5 PREPARATION.. E-6 FILTER INSTALLATION.. E-6 OPERATION.. E-8 MAIN UNIT OPERATION.. E-8 CARE AND MAINTENANCE.. E-10 MAIN UNIT.. E-10 ODOUR SENSOR.. E-10 WASHABLE ACTIVE CARBON FILTER CARE. E-11
FILTER REPLACEMENT GUIDELINES.. E-12.
TROUBLE SHOOTING.. E-13 SPECIFICATIONS.. E-14 INFORMATION ON PROPER DISPOSAL.. E-15
Thank you for purchasing the SHARP Air Purifier. Please read this manual carefully for the correct usage information. Before using this product, be sure to read the section: Important Safety Instructions. After reading this manual, retain it in a convenient location for future reference.

FU-W28E.eng.indd 3

IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should be followed, including the following:
WARNING - To reduce the risk of electrical shock, fire or injury to persons:
Read all instructions before using the unit. Use only a 220-240 volt outlet. Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loosened. Periodically remove dust from the power plug. Do not insert fingers or foreign objects into the intake or air outlet. When removing the power plug, always hold the plug and never pull the cord. Electrical shock and/or fire from short circuit may occur as a result. Do not remove the plug when your hands are wet. Do not use this unit near gas appliances or fireplaces. Remove the power plug from the wall outlet before cleaning the unit and when not using the unit. Electrical shock from bad insulation and/or fire from short circuit may occur as a result. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, Sharp authorized Service Centre or similarly qualified person in order to avoid a hazard. Do not operate when using aerosol insecticides or in rooms where there is oily residue, incense, sparks from lit cigarettes, chemical fumes in the air or in very high humidity condition, such as a bathroom. Be cautions when cleaning the unit. Strong corrosive cleansers may damage the exterior. Only Sharp Authorized Service Centre should service this air purifier. Contact the nearest Service Centre for any problems, adjustments, or repairs.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
NOTE - Radio or TV Interference
If this air purifier should cause interference to radio or television reception, try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the unit and radio/TV receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FU-W28E.eng.indd 4

CAUTIONS CONCERNING OPERATION
Do not block the intake and/or air outlet. Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into contact with steam. Do not lay the unit down when using. Always hold the handle on the back of the unit when moving it. Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury. Do not operate the unit without the filter. Do not wash and reuse HEPA filter. It not only does not improve filter performance, it may cause electric shock or malfunction. Clean the exterior with a soft cloth only. The unit surface may be damaged or cracked. In addition, the sensors may malfunction as a result.
During the operation of the product, please place the unit at least 2 m away from equipment which are subject to electrical waves such as televisions, radios or wave clocks. Avoid a location where the sensor is exposed to direct wind. The unit may not operate properly. Avoid locations where curtains, etc., come into contact with the intake or air outlet. Curtains, etc., may become dirty or a malfunction may occur. Avoid locations where the unit is exposed to condensation, due to drastic temperature changes. (Use under appropriate conditions between 0 and 35C in the room.) Place on a stable surface with sufficient air circulation. When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly. Do not install when there is generation of lampblack, such as in a kitchen, etc. The unit surface may crack or the sensor may malfunction as a result. Leave about 60cm of space from the wall. The wall behind the air outlet may become dirty as time passes. When using the unit for extended period of time in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In addition, periodically clean the wall.

INSTALLATION GUIDELINES

FILTER GUIDELINES
Follow the instructions in this manual for correct care and maintenance of the filters.

FU-W28E.eng.indd 5

08.11.13 3:45:51 PM

PART NAMES

MAIN UNIT DISPLAY
POWER ON/OFF Button Plasmacluster ON/OFF Button Fan Speed Button
C Fan Speed Indicator Lights Odour Senser Plasmacluster Ion ON/OFF Indicator Light

ILLUSTRATIVE DIAGRAM

Odour Sensor Main Unit

HEPA Filter

(blue/white)

(black)

Washable Active Carbon Filter
Filter Support Front Panel

FU-W28E.eng.indd 6

Blue : Plasmacluster ON Light off : Plasmacluster OFF
Plasmacluster Indicator Light(blue)

CLEAN - SIGN Light

The colour changes according to the air condition.

Clean Green

Slightly Impure Orange

Very Impure Red

INCLUDED

Operation manual

Handle Air Outlet

Date Label

Power Cord
(Shape of plug depends on country.)

FU-W28E.eng.indd 7

PREPARATION
Be sure to remove the power plug from the wall outlet.

FILTER INSTALLATION

To maintain the quality of the filters, they are installed in the main unit and packed in plastic bags. Be sure to remove the filters from the plastic bags before using the unit.

Remove the filters

Front Panel
Front Panel. 1 Remove the of the Front Panel. Pull the bottom
Remove the Filter Support.
Pinch the two tabs and lift to remove.

Up side Tabs

Remove the Active Carbon
Active Carbon Filter HEPA Filter Main Unit
3 Filter and HEPA Filter.
4 Remove the Active Carbon Filter and HEPA Filter from

the plastic bags.

Active Carbon Filter

FU-W28E.eng.indd 8

08.11.13 3:45:52 PM

Install the filters

Place the HEPA Filter

the tabs facing up.

1 within the main unit with
Do not install the filter backwards or the unit will not operate properly.
Filter the Active Carbon 2 Place on top of the HEPA

Filter.

Make sure that the tab of the HEPA Filter remains visible.
Tabs Tabs ENGLISH Up side Tabs Bottom side tabs Date Label
the tabs into the associated holes the main unit. 3 Insertpushbottom sidetabsofof the Filter Support Next the upside into the main unit.
4 Fix the Front Panel to the main unit.

usage start 5 Fill in the Date Label. date on the
Use the date as a guide for the Filter Replacement schedule.

Filter Support

FU-W28E.eng.indd 9

OPERATION

MAIN UNIT OPERATION
Fan Speed Indicator Lights Plasmacluster Indicator Light Plasmacluster ON/OFF Indicator Light

Power ON/OFF Button

Press to start operation (short beep) and stop operation (long beep) Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off. Unless the power cord has been unplugged, the operations starts in the previous mode it was operated in.

Fan Speed Button

The operation mode can be switched as below.

AUTO operation

The fan speed is automatically switched (MEDIUM, LOW) depending on the amount of impurities in the air. The sensors detect the impurities for efficient air purification.

MAX operation

The unit will operate at a fan speed of MAX.

ION SHOWER operation

By continuously discharging strong airflow for 15 minutes the unit effectively removes airborne dust, pollen, mold and allergens from the air as they are drawn through the filter system. When the operation finished, the unit will return to the AUTO operation.

MEDIUM operation

The unit will operate at a fan speed of MEDIUM.

SILENT operation

The unit will operate quietly using minimal air intake. *HIGH fan speed is an intermediate speed between MEDIUM and MAX. *LOW fan speed is an intermediate speed between SILENT and MEDIUM.

POLLEN mode operation

The unit will operate at HIGH* fan speed for 10 minu t e s , t h e n w i l l a l t e r n a t e b e t w e e n MEDIUM and HIGH* for 20 minutes.
10 minutes: HIGH fan speed 20 minutes: MEDIUM fan speed 20 minutes: HIGH fan speed

FU-W28E.eng.indd 10

08.11.13 3:45:53 PM
Fan Speed Button Plasmacluster ON/OFF Button POWER ON/OFF Button
ABOUT THE CLEAN-SIGN he condition of the CLEAN-SIGN depends on the room air condition detected by the Odour Sensor T when the plug is inserted into the wall outlet. t is possible to have a green CLEAN SIGN if there are impurities in the are when the product is first turned on. I After a while, however, the base impurit rate will be adjusted to detect room air condition correctly.
Plasmacluster ON/OFF Button
Press the Plasmacluster ON/OFF Button to turn Plasmacluster Ion Mode ON and OFF. When Plasmacluster is ON, both the Indicator Light and Plasmacluster Indicator Light will turn on.(blue)

LIGHTS ON/OFF Button

(Please press the Plasmacluster ON/OFF Button for 3 seconds.)
Switches the Plasmacluster Indicator Light and CLEAN-SIGN Light either ON or OFF.
ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
Set to low if CLEAN-SIGN Light constantly red to reduce sensitivity, and set to high if CLEAN-SIGN Light is constantly green to increase sensitivity.

The Fan Speed Indicator Lights will display the currently set sensor sensitivity level. The factory setting is Standard, indicated by the MED light.
With the unit OFF, press the Fan Speed Button for 3 seconds.
Press the Fan Speed Button to set the desired sensor sensitivity.
Refer to the diagram on the right to select the desired sensor sensitivity level.
Fan Speed Indicator Light
Sensor Detection sensitivity

High Standard Low

Press the Power ON/OFF Button.
Note that if the Power ON/OFF Button is not pushed within 8 seconds of adjusting sensor sensitivity, the setting will be saved automatically. The sensor sensitivity setting will be saved even if the unit is unplugged.

FU-W28E.eng.indd 11

08.11.13 3:45:54 PM

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically. When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

MAIN UNIT

Care Cycle

1 month

To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean.
Wipe with a dry, soft cloth Do not use volatile fluids Do not use detergents
For stubborn stains or dirt, use a soft cloth dampened with warm water. Benzene, paint thinner, polishing powder, etc., may damage the surface. Detergent ingredients may damage the unit.
Keep the unit away from water

ODOUR SENSOR

Care Cycle 2 months
The sensitivity of the sensor will become unstable if the odour sensor is dirty or blocked. Remove dust from the surface of the sensor opening using a vacuum cleaner.

Hole of sensor

FU-W28E.eng.indd 12
WASHABLE ACTIVE CARBON FILTER CARE WASHABLE ACTIVE CARBON FILTER CARE
HAND WASH ONLY! DO NOT TUMBLE DRY!
We recommend replacing the active carbon filter every six months. Clean the filter as offen as necessary when odour persists.
area. If possible, dry outdoors. 1 Fill a large containera with 5 Dry filter completely in a well ventilated lukewarm water, add mild kitchen detergent and stir.
Dilute as indicated on the detergent container.

CAUTION

to soak 2 Allow the filterminutes. approximately 10
Avoid drying filter outdoors during inclement weather (e.g. rain or cold temperatures). Do not allow filter to freeze. If filter is dried indoors, take precautions, such as placing towels, etc under the filter to prevent water damage to the floor.

6 Reinstall the Filters.

Reinstall the filters as shown on Page E-6,7. Dry filter completely before replacing to prevent odours. Do not operate unit without all filters properly installed.

Rins tho 3 clean ewater.r o u g h l y w i t h
If rinsing in a c o n t a i n e r, b e sure to rinse 3 to 4 times so that the odour is rinsed thoroughly from the filter.
Filter Support Active Carbon Filter HEPA Filter Main Unit

Remove excess water.

The filter will be saturated with water after rinsing. To decrease drying time, wrap the filter in an old thick towel so that excess water can be removed.
Some carbon may adhere to the towel, if you towel -dry the filter, but it is harmless.

FU-W28E.eng.indd 13

FILTER REPLACEMENT GUIDELINES
Depending on the usage environment, air outlet odour may become strong after several months. If dust or odour cannot be removed easily, replace the filters.
(Refer to Please read before operating your new Air Purifier)
The following filter life and replacement period is based on the condition of smoking 10 cigarettes per day and the dust collection/deodorization power is reduced by half compared with that of new filters. We recommend to replace the filters more frequently if the product is used in a condition significantly severer than normal household use. HEPA Filter Active Carbon Filter About 2 years after opening About 2 years after opening
Guide for filter replacement timing
See for 1 howpage E-6,7 the directions on to install filters when replacing. Fill in the usage start date 2 the filters on the Date Label. of

REPLACING THE FILTERS

Model: FZ-425SEF HEPA Filter : 1 unit Active Carbon Filter: 1 unit Please consult your dealer for purchase of replacement filters.

Replacement Filters

Please dispose of replaced filters according to the local disposal laws and regulations. HEPA Filter materials: Filter: Polypropylene Frame: Polyester Active Carbon Filter Materials: Deodorizer: Activated charcoal Nonwoven fabric : Polyester

Disposal of Filters

FU-W28E.eng.indd 14

08.11.13 3:45:55 PM

TROUBLESHOOTING
Before calling for repair, please review the list below, since the problem may not be a unit malfunction.

SYMPTOM

Odours and smoke are not removed.
The CLEAN-SIGN Light lights green even when the air is impure. The CLEAN-SIGN Light lights orange or red even when the air is clean. A clicking or ticking sound is heard from the unit.
REMEDY (not a malfunction)
Clean or replace the filters if they appear to be heavily soiled. (Refer to E-11,E-12) The air could be impure at the time the unit was plugged in. (Refer to E-5) Pull out the plug from the electrical outlet, and insert the plug one minute later. The sensitivity of the sensor become unstable when the opening of the odour sensor is dirty or is clogged. Clean the dust around the sensor opening using a vacuum cleaner. (Refer to E-10) licking or ticking sounds may be audible when the unit is genC erating ions. Check to see if the filters are heavily soiled. Replace the filters. Plasmacluster Air Purifiers emit small traces of ozone which may produce an odour. These ozone emissions are well below safety levels. Is the unit installed in a location that is difficult for the sensor to detect cigarette smoke? Is the odour sensor opening blocked or clogged? (In this case, clean the opening.) (Refer to E-10) Check to see if the Lights OFF Mode is selected. If so, then press the Plasmacluster ON/OFF Button for 3 seconds to activate the indicator lights. (Refer to E-9)

The discharged air has an aroma or odour.
The unit does not operate when cigarette smoke is in the air.
The Plasmacluster Indicator Light or the CLEAN-SIGN Light will not activate.

ERROR DISPLAY

LAMP INDICATION
The SILENT Fan Speed Indicator Light blinks.

REMEDY

Fan motor is disconnected or abnormal. Operation stops. Pressing the POWER ON/OFF button will reset the error display, but if error occurs again, contact the shop where you purchased the unit.

FU-W28E.eng.indd 15

SPECIFICATIONS
Model Power supply Fan Speed Adjustment Fan Rated Power Speed Operation Fan Speed Recommended Room Size High density Plasmacluster ion applicable floor surface Cord Length Dimensions Weight FU-W28E 220-240V 50/60Hz MAX 33W 168m3/hour MED 12W 90m3/hour SILENT 3.9W(3.5W) *1 30m3/hour
~21m2 *2 ~10m2 *3 2.0m 410mm(W)x158mm(D)x430mm(H) 4.3kg
*1 Numbers in parentheses indicate the power consumption when the Plasmacluster indicator light and the
CLEAN-SIGN light are off.
*2 The applicable floor surface area is appropriate for operating the unit of maximum fan speed. Applicable floor surface area indicates the space where a certain amount of dust particles can be removed in 30 minutes.(JEM1467) *3 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the center of the room (at a height of approximately 1.2 meters from the floor) when the product is placed next to a window and run at the MAX operation position.

Standby Power

In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes about 0.8W of standby power. For energy conservation, unplug the power cord when the unit is not in use.

FU-W28E.eng.indd 16

08.11.13 3:45:56 PM
A. Information on Disposal for Users (private households) 1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one.

*) Please contact your local authority for further details.
Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you dont purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch. B. Information on Disposal for Business Users.

1. In the European Union

If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

FU-W28E.eng.indd 17

08.11.13 3:45:57 PM

FU-W28E.eng.indd 18

08.11.13 3:45:58 PM

FU-W28E.eng.indd 19

SHARP CORPORATION

OSAKA, JAPAN

Printed in China TINS-A302KKRZ

FU-W28E.eng.indd 20