Informatie over afvalverwerking van batterijen Voor EU: De doorgestreepte vuilnisbak op wieltjes duidt aan dat de gebruikte batterijen niet mogen terechtkomen in het gewone huishoudelijke afval. Er bestaat een gescheiden ophaalsysteem voor deze gebruikte batterijen om eigen behandeling en recyclage volgens de wetgeving toe te laten. Gelieve de locale autoriteiten te contacteren voor de details van ophaling en recyclage. Voor Zwitserland: De gebruikte batterij moet bij het verkooppunt teruggebracht worden. Voor andere niet EU landen: Gelieve contact op te nemen met uw locale autoriteiten voor de correcte methode van verwerking van de gebruikte batterijen.
Information on Battery Disposal For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the selling point. For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery.

ENGLISH

Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.

Features

SRS WOW improves the dynamic audio performance of compressed and uncompressed audio by expanding the size of the audio image and creating a deep, rich bass response.

Accessories

Please confirm that only the following accessories are included.

Contents

General Information
Remote control x 1 RCA cable (2 pins - 2 pins) x 1
Precautions. 2 Controls and indicators. 3 - 5

Preparation for Use

Spike x 4 (length: 25 mm) Foot cushion x 4

AC power lead x 1

AC power lead x 1 (for Taiwan only)
Speaker preparation. 6 - 8 Placing the speaker. 9 Falling prevention. 10 Speaker connections to TVs. 10 - 12 AC power connection. 13 Remote control. 14 Basic Operation General control. 15 - 17
AC/DC adaptor x 1 (RADPAA061AWZZ) Nut

Wall mount angle x 2

(Spike + Nut) x 4 (length: 30 mm) Pattern paper x 1 Note: The AC/DC adaptor may be different from the one in the drawing.
References Troubleshooting chart. 18 Maintenance. 19 Error indicators and warnings. 19 Specifications. 20

HT-SB300_A6_EN_UK.fm

2009 February 10

Precautions

Please ensure that the equipment is positioned in a wellventilated area and ensure that there is at least 10 cm (4") of free space along the sides and top of the equipment. 10 cm (4") 10 cm (4") 10 cm (4")

General

Use the speaker on a firm, level surface free from vibration. Keep the speaker away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. Do not place anything on top of the speaker. Do not expose the speaker to moisture, to temperatures higher than 60C (140F) or to extremely low temperatures. If your system does not work properly, disconnect the AC power lead from the Wall socket. Plug the AC power lead back in, and then turn on your system. In case of an electrical storm, unplug the speaker for safety. Hold the AC power plug by the head when removing it from the Wall socket, as pulling the lead can damage internal wires. The AC power plug is used as a disconnect device and shall always remain readily operable. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. This speaker should only be used within the range of 5C - 35C (41F - 95F).
Warning: The voltage used must be the same as that specified on this speaker. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this speaker with a voltage other than that which is specified. The supplied AC/DC adaptor contains no user serviceable parts. Never remove covers unless qualified to do so. It contains dangerous voltages, always remove mains plug from the main outlet socket before any service operation or when not in use for a long period. The AC/DC adaptor supplied with the HT-SB300 must not be used with other equipment. Never use an AC/DC adaptor other than the one specified. Otherwise, problem or serious hazards may be created.

DE (1)

FR (2)

ES (3)

SV (4)

Volume control

The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels, which occurs whilst turning the speaker on with the volume control setting up high, or whilst continually listening at high volumes.

IT (5)

NL (6)

PT (7)

ZH (8)

EN (9)

AR (10)
2009 February 10 HT-SB300_A6_EN_UK.fm

Controls and indicators

Reference page 1. Sport Indicator. 15 2. Standard Indicator. 15 3. Information Display. 15 4. Cinema/Game Indicator. 15 5. News Indicator. 15 6. DTS Indicator. 16 7. Dolby Indicator. 16 8. On/Stand-by Button. 15 9. Volume Down Button. 15 10. Volume Up Button. 15 HT-SB300_A6_EN_UK.fm 2009 February 10

Front Panel

11. 12. 13. 14. 15. 16. 17. 18. 19.
Reference page Surround Button.15 Function Button.17 Remote Sensor.14 Dolby Virtual Speaker Indicator.16 Dolby Prologic II Indicator.16 Left Front Speaker Bass Reflex Duct Subwoofers Right Front Speaker

LINE IN 2

RIGHT LEFT LINE IN 1

1. 2. 3. 4. 5. 6.

Reference page Audio Line In 2 Socket. 11 Line In 1 Sockets. 11 DC IN Socket. 13 Coaxial Digital Audio Input Socket. 12 Optical Digital Audio Input Socket. 12 Subwoofer Pre Output Socket. 9

Rear Panel

Controls and indicators (continued)

Remote Control

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
Reference page Remote Control Transmitter. 14 Dolby Virtual Speaker Button. 16 Cinema/Game Button. 15 Standard Button. 15 Volume Up Button. 15 Subwoofer Level Down Button. 17 Volume Down Button. 15 Bass/Treble Button. 17 TV Operation Buttons. 5 On/Stand-by Button. 15 Sport Button. 15 News Button. 15 Subwoofer Level Up Button. 17 Dimmer Button. 15 Mute Button. 15 Line Button. 17 Digital 1 Button. 17 Digital 2 Button. 17
TV Operation Buttons (Only SHARP TV):
On/Stand-by Button Remote control Plastic shield Volume Up and Down Buttons Battery holder Note: Before using remote control, please remove plastic shield at battery holder. Sets the TV Input Select power to ON Button (TV) or STANDBY. Turn up/down Channel Up the TV and Down volume. Buttons Press the button to switch the input source. Switch up/ down the TV channels.
HT-SB300_A6_EN_UK.fm 2009 February 10
Notes: Some models of SHARP TV may not be operable. SHARP TV remote control will not work with HT-SB300 system.

Speaker preparation

Make sure to unplug the AC power lead before installing the speaker or changing the position. Select from three installation methods acleading to the preferred position. Using spikes You may choose from the two different spike lengths provided: 25 mm and 30 mm. Nuts (secured on 30 mm spikes) must be used when installing either the 25 mm or 30 mm spikes. The speaker can be levelled by adjusting the spikes and nuts. Option 2 Option 1 Caution: When using these spikes on glossy or slippery table such as on glass top, stick foot cushions at the bottom of the spikes to avoid slippage. Using foot cushions

Option 2

Option 1 Attach foot cushions as shown Note: Option 1 or option 2 foot cushion positions based on LCD TV stand.
Tighten all spikes as shown Notes: Option 1 or option 2 indicates spike positions based on LCD TV stand. When attaching the spikes, place the speaker on a cushion or soft cloth to avoid damage.
Speaker preparation (continued)
To mount the speaker on the wall Caution: Be very careful to prevent the speaker [1.75 kg (3.86 lbs.)] from falling when mounting on the wall. Before mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The speaker may fall.) If unsure, consult a qualified service technician. Mounting screws are not supplied. Use appropriate ones. Check all wall mount angle screws for looseness. Select a good location. If not, accidents may occur or the speaker may get damaged. SHARP is not responsible for accidents resulting from improper installation.
Wall mount angle fixed to the wall (Horizontal position)
Fix the pattern paper to the wall in horizontal position as below. 44 mm 509 mm 29 mm Wall surface 44 mm

Pattern paper

Driving screws
SHARP designed the speakers so you may hang them on the wall. Use proper screws (not supplied). See below for size and type. 3.2 mm (1/8") 5 mm (3/16") Min. 22 mm (7/8")
Make a hole on the wall following the screw point marks on the pattern paper by using a drill. 32 mm (1-1/4") 8-9 mm (3/8") Wall surface

9 mm (3/8")

Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface. 32 mm (1-1/4") 8-9 mm (3/8") Wall surface (Continued to the next page)

Installing the speaker

Screw the wall mount angle to the wall as shown in the illustration. (Total screw is 8 pieces) Wall mount angle Wall surface Wall mount angle (screws x 4) Wall surface
Align the wall mount slot at the speaker to the wall mount angle. Slot the speaker into the wall mount angle. Fix them securely.

(screws x 4)

Wall surface Wall mount angle
Wall surface Note: Make sure all screws are fully tighten. (screws are not supplied) ZH (8)

Placing the speaker

Installation image: TV You can connect a subwoofer with an amplifier to the SUBWOOFER PRE OUT socket. Commercially available subwoofer (amplifier built in)

Using other subwoofer

Audio cable (commercially Audio signal available) VCR Place the speaker as shown. Notes: As the sound from the speaker is omni-directional, you can place the speaker anywhere you like. However, it is recommended to place it as close to the TV as possible. The front panel of the speaker is not removable. Caution: Do not change the installation direction when the speaker is turned on. Do not stand or sit on the speaker as you may be injured. DVD player Speaker To audio input socket
To SUBWOOFER PRE OUT socket
Note: No sound is heard from the subwoofer without a built-in amplifier.

Falling prevention

Safety wires (not supplied) are useful to prevent the speaker from falling off the table.
Speaker connections to TVs
Caution: Turn off all other equipment before making any connections. Tuner receiving for other audio system Placing the aerial near the speaker AC power lead may cause noise pick up. Place the aerial away from the speaker for better reception. Notes: To connect to TV, use either LINE IN 1 sockets or AUDIO LINE IN 2 socket only. Refer the operation manual of the equipment to be connected. Fully insert the plugs to avoid fuzzy pictures or noises.
EN (9) Loop the safety wires (not supplied) into each hole as shown and tie the safety wires to the LCD TV stand.
Speaker connections to TVs (continued)
If the TV/monitor has an audio output, connect it to the LINE IN 1 sockets on the rear of the speaker. To select LINE IN 1 function: On speaker: Press FUNCTION button repeatedly until L1 is displayed. On remote control: Press LINE button repeatedly until L1 is displayed. TV

Connecting to a TV

If the TV/monitor has headphone socket, connect it to the LINE IN 2 socket on the rear of the speaker. To select LINE IN 2 function: On speaker: Press FUNCTION button repeatedly until L2 is displayed. On remote control: Press LINE button repeatedly until L2 is displayed.

Connecting to a TV (with Headphone socket)

HEADPHONE

To audio output sockets RCA cable (supplied) To LINE IN 1 sockets
To HEADPHONE socket Audio cable (not supplied) To AUDIO LINE IN 2 socket

Speaker

LINE IN 2 RIGHT LEFT LINE IN 1
Notes: If the TV volume is continuously in low level, the speaker will automatically power off. Increase the TV output volume to enjoy the sound from the speaker. If the speaker volume is continuously in very high level, the speaker will mute and recover after 3 seconds.
Connect to the digital tuner, etc. using an optical digital audio cable or a coaxial digital audio cable. To select DIGITAL 1 (coaxial input) or DIGITAL 2 (optical input) function: On speaker: Press FUNCTION button repeatedly until d1 or d2 is displayed. On remote control: Press DIGITAL 1 or DIGITAL 2 button and d1 or d2 is displayed.
Connecting a digital tuner, etc.
To coaxial digital audio output socket
To optical digital audio output socket
To the TV (video) Coaxial digital audio cable (commercially available) Audio signal Audio signal
FR (2) Optical digital audio cable (commercially available)
To COAXIAL Speaker input socket

To OPTICAL input socket

Note: When connecting with an optical digital cable, set the digital output of the digital tuner to PCM. Refer to the operation manual of the digital tuner.

AC power connection

After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then to the Wall socket. AC/DC Adaptor Cable DC IN socket (DC 12 V)
Using with the AC/DC adaptor
Plug the AC power lead into the AC/DC adaptor. Plug the AC/DC adaptor cable into the DC IN socket on the speaker. Plug the AC power lead into an Wall socket. The STAND-BY indicator will turn RED when AC power is applied. The power indicator will turn GREEN when the system in ON.
AC power lead Wall socket 1 (AC 100 - 240 V ~ 50/60 Hz)

AC/DC Adaptor

Notes: Unplug the AC/DC adaptor from the Wall socket if the speaker will not be used for a long period of time. Use only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an electric shock or fire.

Remote control

Battery installation 1 Insert pin into the hole as shown and pull to open the
battery holder. Caution: Do not use rechargeable battery (nickel-cadmium battery, etc.). Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Installing the battery incorrectly may cause the speaker to malfunction. Notes concerning use: Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase CR 2025, coin lithium battery. Periodically clean the transmitter on the remote control and the sensor on the speaker with a soft cloth. Exposing the sensor on the speaker to strong light may interfere with operation. Change the lighting or the direction of the speaker if this occurs. Keep the remote control away from moisture, heat, shock, and vibrations. Point the remote control directly at the remote sensor on the speaker. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your system. Remote sensor Precautions for battery use: Remove the battery if the speaker will not be used for a long period of time. This will prevent potential damage due to battery leakage.
Pin Back of remote control
the new battery and then slide the battery holder back into the remote control. Battery holder Battery type Locking tab Polarity (+) symbol
2 Remove the old battery from the battery holder, insert

Positive (+) side up

Test of the remote control

0.2 m - 6 m (8 - 20)

General control
Speaker operation: Press volume up (VOL. +) to increase the volume and press volume down (VOL. ) to decrease the volume.

02.. 59 60

Remote control operation: Press the VOLUME + button to increase the volume and the VOLUME button to decrease the volume.

Muting

Basic Operation
The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume.

To turn the power on

Press the ON/STAND-BY button. The power indicator turns green. If the power does not turn on, check whether the power lead is plugged in properly. To set the speaker to stand-by mode: Press the ON/STAND-BY button again. The STAND-BY indicator turns red.
Display brightness control
Press the DIMMER button to adjust the brightness of the display and sound mode indicator.
Sound mode indicator and display bright Sound mode indicator and display dim Sound mode indicator and display off. Pressing any button will light up the display for 3 seconds only.
Main unit operation: When the SURROUND button is pressed, the current mode setting will light up. To change to a different mode, press the SURROUND button repeatedly until the desired sound mode lights up. Remote control operation: Press a desired sound mode on the remote control.

STANDARD CINEMA/GAME

Preset sound mode
STANDARD CINEMA/GAME SPORT NEWS
WOW HD off WOW HD on for cinema/game sound effect WOW HD on for sport broadcasting WOW HD on for news
If you turn off and on the speaker with the volume set to 40 or higher, the volume starts at 20 and fades in to the last set level.

Volume auto fade-in

The Dolby Virtual Speaker (DVS) creates virtual surrounds comparable to the 5.1ch sound produced by the 2.1ch speaker. When setting DVS to ON for 2 channel stereo signals, Dolby Pro Logic II brings out virtual sound effects through the signals converted into 5.1ch. Press the DVS button. The Dolby Virtual Speaker indicator lights up.
Dolby Virtual Speaker (DVS) sound mode
Notes: Monaural signals do not generate surround effects. DVS sound effect may not be obtained depending on signal types (the Dolby Virtual Speaker indicator blinks). In this case, set the DVS mode to OFF. ON The Dolby Virtual Speaker creates multichannel-like sound effects. Compared with the cinema mode, the bass sound level is slightly reduced. The Dolby Pro Logic II indicator also lights up if 2ch sound signals are detected.

DVS can only be turned on using remote control. If you turn ON DVS, WOW HD will automatically turn OFF. The DVS can be turned OFF by pressing any of the preset sound mode buttons. This product incorporates decoders supporting the Dolby Digital system and DTS system. One of the digital audio systems for theatrical use. As the sound quality is emphasised, you can enjoy the DTS (Digital Theatre realistic sound effect in the home Systems) theatre system. Lights up when detecting DTS signal. One of the digital audio systems for theatrical use. You can also enjoy the stereophonic effect in the home theatre system. Lights up when detecting Dolby Digital signal.

Dolby Digital

General control (continued)
System expanding 2ch stereo sound to more spacious sound. When setting Dolby Virtual speaker to ON, Dolby Pro Logic II is activated to enjoy the stereo sound effect. Lights up when Dolby Pro Logic II is activated. On speaker: When the FUNCTION button is pressed, the input source will change. Press it repeatedly to select desired input source. On remote control: Press the LINE button repeatedly to select L1 (LINE IN 1 input) or L2 (LINE IN 2 input).

Function

LINE IN 1

Dolby Pro Logic II

The speaker level can be adjusted. To increase the level, press the SUBWOOFER LEVEL + button. To decrease the level, press the SUBWOOFER LEVEL button.

Subwoofer level control

DIGITAL 1

DIGITAL 2 -5 -4. 4 5

Note: When sound from the speaker is distorted, decrease the subwoofer level. 1. Press the BASS/TREBLE button to select BASS. 2. Within 5 seconds, press the VOLUME (+ or ) button to adjust the bass. 1. Press the BASS/TREBLE button to select TREBLE. 2. Within 5 seconds, press the VOLUME (+ or ) button to adjust the treble.

Bass control

Treble control
Note: The backup function will protect the memorised function mode for a few hours should there be a power failure or the AC power lead becomes disconnected. Auto power on function: When you press the LINE / DIGITAL 1 / DIGITAL 2 button on the remote control, the speaker will turn on at the selected function. Auto power off and auto detect signal: If no analogue signal is detected within 1 minute or if d1/ d2 display is blinking for 30 seconds during power on, the speaker will automatically go to stand-by mode. The STANDBY indicator turns orange. The speaker will automatically power ON if it detects audio signal from connected equipment.

Troubleshooting chart

Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. Symptom The speaker cannot be turned on with the remote control. TV cannot be operated with the remote control. Possible cause Is the AC power lead of the speaker plugged in? Is the battery inserted? Depending on the model, some or all functions may not be operable using the remote control of this speaker. In this case, use the remote control supplied with the TV.
Symptom No sound is heard. Possible cause Is the input signal (selection) set properly? Is the volume level set to 0? Is muting activated? Move the speaker away from any computers or mobile phones. Set this speaker to the stand-by mode and then turn it back on. Is the speaker unplugged? (Refer to page 17) The protection circuit may be activated. Unplug and plug in the power lead again after 5 minutes or more. Is the unit set to Dimmer display off mode?
Noise is heard during playback. When a button is pressed, the speaker does not respond. The power is not turned on.

References

Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the speaker to malfunction. If this happens, leave the power on until normal operation is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the speaker. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Set the speaker to the stand-by mode and turn the power on again. 2. If the speaker is not restored in the previous operation, unplug and plug in the speaker, and then turn the power on.

Condensation

If problem occurs
The information is not displayed even if the unit is turned on.
Symptom The remote control does not operate properly. Possible cause Is the battery polarity correct? Is the battery dead? Is the distance or angle incorrect? Are there any obstructions in front of the speaker? Is there a strong light shining on the remote sensor? Is the remote control for another equipment used simultaneously? HT-SB300_A6_EN_UK.fm

Maintenance

Periodically wipe the cabinet with a soft cloth. Caution: Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish. Do not apply oil to the inside of each component. It may cause malfunctions.
Error indicators and warnings
When you fail to perform operations properly, the following messages are displayed on the speaker. Display Meaning Malfunction of the surround circuit. Place the speaker away from noise source and plug the AC power lead into another AC outlet. (*)

Cleaning the cabinet

When there is no input signal. Play back the connected equipment. Nonstandard signal. Cannot be recognized. Signals other than DOLBY DIGITAL, DTS, Linear PCM cannot be recognized. Poor connection of the digital audio input terminal. Turn off the unit and check if the cable is connected properly.
(Display blinks continuously) Power indicator (blinks red) When the protection circuit is activated.
(*): Should the same message appear even if the speaker is unplugged and plugged in or is set to the stand-by mode and on again, contact your local dealer where you purchased the speaker.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker. There may be some deviations from these values in individual speaker. Analogue input (LINE 1): RCA type x 1pair (L/R) 500 mV / 47 kohms Analogue input (LINE 2): Stereo mini socket 3.5 mm 100 mV / 47 kohms Coaxial digital input (DIGITAL 1): RCA type x 1 Optical digital input (DIGITAL 2): Square type x 1 Dimensions Width: 800 mm (31-1/2") Height: 96 mm (3-3/4") Depth: 70 mm (2-3/4") Weight 1.85 kg (4.10 lbs.) (*) This power consumption value is obtained when in the power stand-by mode. Input terminals
Power source Power consumption Output power DC IN 12V 4A: AC/DC adaptor (AC 100 - 240 V ~ 50/60 Hz) Power on: 11 W Power stand-by: 0.6 W (*) Front speaker: RMS: 12 W (6 W + 6 W) (10% T.H.D.) RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.) Subwoofer: RMS: 20 W (10% T.H.D.) RMS: 13 W (0.9% T.H.D.) 2.1-way Speaker System Front speakers: 38 mm (1-1/2") Full Range Impedance: 12 ohms / Channel Subwoofer: 57 mm (2-1/4") Woofer (x4) Impedance: 3 ohms (12 ohms x 4 parallel connections) Subwoofer Pre Out: 10 kohms

Audio output terminals