2. Gigaset.net assistant: After you have completed the VoIP configuration, i.e. after entering your user data or the auto-configuration code for your VoIP account, the Gigaset.net assistant is no longer started (the step "Entering your name in the Gigaset.net directory" in the telephone user guide can be skipped). After you have entered your user data or the auto-configuration code, the handset reverts to idle status. The Gigaset.net assistant is started when you open the Gigaset.net directory for the first time ( Page 7). You can then enter your name in the Gigaset.net directory. 3. If a firmware update for your telephone is available in the Internet: In this case, the message New firmware available is displayed if you press the flashing message key after starting your handset and connecting the base. Perform the firmware update (press the right display key Yes). Once the update has been completed (after approx. 3 minutes) the handset's idle display appears again and the message key f flashes. If you press f, the following is displayed: Start wizard for entry of VoIP connection data?. You can then start the connection assistant as described in the user guide.
Description of new and updated functions Starting the Gigaset.net assistant when first opening the Gigaset.net-directory
Starting the Gigaset.net assistant when first opening the Gigaset.netdirectory
After setup, you can use the Gigaset.net assistant to enter your name in the Gigaset.net directory, i.e. create a Gigaset.net directory entry for your telephone. To do so, open the Gigaset.net directory. Precondition: Your handset is in idle status. s Press and hold. q If necessary, select Gigaset.net from the list of available online directories and press OK. The following appears in the handset's display:
Gigaset.net Start assistant for Gigaset.net?
Press the display key Yes to start the assistant.
Please note The Gigaset.net assistant is only opened the first time you open the Gigaset.net directory. If you press No, the assistant will be cancelled and not restarted. You can then enter your name using the Gigaset.net directory menu (Options Own details).

Messages when loading requested information
The information is loaded from the Internet. Wait a few seconds until the information is displayed. The display shows Please wait. If the information for an info service cannot be displayed, one of the following messages appears: Requested page cant be reached. Possible causes of this are: u Time limit exceeded (timeout) when loading the information, or u the Internet server for the info service cannot be accessed.
Coding error on requested page The content of the requested info service is coded in a format which the handset cannot display. Cant display requested page General error when loading the info service. Login failed. Registration has failed. Possible causes of this are: u You have not entered your registration data correctly. Reselect the info service and repeat the registration process. Please remember that data is case sensitive. u You are not entitled to access this info service.
Check your Internet connection and repeat the request at a later time.
Registration for personalised info services
If a special registration with user name and password is required to access an info service, the following is displayed after the service has been called up (example):
Login Username: Password:

Username Password

Enter the user name that you have agreed with the info service provider. Enter the password associated with this user name. Press the display key to send the registration data.
If registration was successful, the requested info service is displayed.
If registration failed, a message to this effect appears on the display loading requested information, Page 9. Please note Please remember that registration data is case sensitive.

Messages when

Operating the Info Center
Depending on the type of info service requested, you can carry out the following actions:
Scrolling within an info service
You can use s to scroll downwards within an info service, and t to scroll up (back).
Skipping back to the previous page
Press the left display key.
Skipping back to the Info Center menu
You want to go offline: Press and hold the end call key a, the handset returns to idle status.
Briefly press the end call key a.

Selecting a hyperlink

Viewing e-mail sender's address
Precondition: You have opened the e-mail message to read ( Page 14). Options Press the display key. From Select and press OK. The sender's e-mail address is displayed in full (if necessary over several lines). Press the display key to return to the inbox. Example:
From firstname.surname@ mailprov.com
Deleting the e-mail message
You have opened the inbox: q Select e-mail entry. Delete Press the display key. Or: You have opened the e-mail message to read ( Page 14) or request the e-mail sender's address to be displayed ( Page 15): Options Press the display key. Delete E-mail Select and press OK. The e-mail is deleted from the incoming e-mail server.
Description of new and updated functions Deactivating your handset's microphone
Deactivating your handset's microphone
As well as muting the handset as described in the user guide (press left on the u control key, the other party hears hold music), you can deactivate your handset's microphone during an external call. The other party cannot hear you, but you can still hear them. You can also deactivate the microphone during a conference call or when call swapping.
Turning off the microphone
Press the display key to deactivate the handset. Your handset's microphone is deactivated. The display shows Microphone is off. Press the display key to switch the microphone back on. The other party can hear you again.
Switching the microphone back on
Please note The microphone is automatically switched on again in the following scenarios: u If, during an external call (you have switched the microphone off), you establish a second connection, either by accepting a waiting call or by successfully connecting to an external/internal consultation call, the microphone is turned on. If you go back to the first party, the microphone remains switched on. (If you reject a waiting call or are unable to connect to a consultation call, the microphone remains switched off.) u If you deactivated the microphone while call swapping, it is reactivated for both connections, as soon as they are connected to the other caller. u If you have deactivated the microphone during a conference call, the microphone is reactivated when you terminate the conference call by selecting Options End Conference (call swapping).
Description of new and updated functions Network services during an external call
Network services during an external call
This section amends the sections "Network services Further network services in the fixed line network" and "Network services Further network services for VoIP" in the user guide for your Gigaset VoIP telephone.
Some network services that were previously accessed via display keys are now provided via the context menu. To open the pop-up menu you must press the display key Options.
u Fixed line network: You have requested the following network services from your fixed

line network provider.

u VoIP: Your phone permits two parallel VoIP connections.
( user guide for your phone, Web configurator Settings Telephony Audio). The following functions are affected u Consultation call During an external call via VoIP or the fixed line network: Press the display key Options. Select External Call and press OK. Enter a number or copy it from the directory and press OK. The first party is placed on hold and hears hold music. u Accepting a waiting call Precondition: Call waiting is activated ( user guide for your phone). You are conducting an external call via VoIP or the fixed line network. A second caller (waiting call) is signalled: Press the display key Options. Select Accept waiting call and press OK. The first party is placed on hold and hears hold music. u Initiating a conference call You are call swapping and want to talk to both parties simultaneously: Press the display key Options. Select Conference and press OK. u Ending a conference call (call swapping) Press the display key Options. Select End Conference and press OK.
Rejecting a waiting call during a VoIP call
You can now reject a waiting call while conducting a conversation via VoIP. You are conducting an external call via a VoIP connection. A second caller (waiting call) is signalled: Options Reject waiting call Select the above and press OK to reject the waiting call.
Description of new and updated functions Operating the base on on the PABX Setting access codes (external line prefixes)
Operating the base on on the PABX Setting access codes (external line prefixes)
This section amends the chapter "Operating the base on the PABX" in the user guide for your Gigaset VoIP phone.
Depending on your PABX, you must dial an access code before making external calls in order to obtain an external line. You can store this access code in your phone. For example, the access code is then automatically placed before the numbers selected from the calls list. v Settings Base Add. Features Access Code Select and press OK. ~ Enter or edit the access code (maximum three digits) and press OK. a Press and hold (idle status). If an access code is set, the following applies: u The access code is added automatically when dialling from the calls list/answering machine list and when dialling emergency numbers and SMS centre numbers. u When dialling numbers manually and dialling numbers from the directory you must add the access code yourself.

Open the following Web page: Settings Telephony Connections. Select Edit in the Gigaset.net area. Select Set to save the changes.
STUN enabled Select No to deactivate STUN. Select Yes if you want your phone to use STUN.
Activating the fixed line network connection as an alternative connection
You can activate the fixed line network connection on your phone as an alternative connection. If an attempt to establish a connection via VoIP then fails, an attempt is made automatically to establish the connection via the fixed line network. An alternative connection would be used in the following cases: u your VoIP connections are busy u the SIP server for the VoIP connection cannot be accessed u the dialled VoIP connection has not yet been configured or has not been configured correctly (e.g. incorrect password) u the base does not have a connection to the Internet, e.g. because your router is deactivated or not connected to the Internet.
u SMS messages that are to be sent via a VoIP connection are not sent via the fixed line

Exceptions

network connection as an alternative. The SMS message is stored in the incoming message list with an error status. Your handset's message key will flash. u If you enter a VoIP line suffix (#1 to #6) or press the IP display key before dialling, the connection is not established over the fixed line network as an alternative. u If you dial a URI or IP address instead of a phone number, the connection cannot be established via the fixed line network. Version 4, 29.10.2007
Open the following Web page: Settings Telephony Number Assignment.
Description of new and updated functions R key function for VoIP Hook flash/call diversion

Area Default Connection

If you want to activate the fixed line network connection as an alternative connection,
click the Yes option next to Automatic Fallback to Fixed Line. Select No to deactivate the function. Now select Set to activate your settings.
R key function for VoIP Hook flash/call diversion
This section replaces/amends the sections "Web configurator R key function for VoIP (Hook flash)" in the user guide for your Gigaset VoIP phone.
Using your phone's Web configurator, you can assign a special feature of your VoIP provider to the S key. Alternatively, you can use the S key for call diversion (call transfer).

Assigning the signal for a provider feature to the S key
To be able to use a special feature of your VoIP provider, your phone must send a specific signal (data packet) to the SIP server. You can assign this "signal" to your phone's R key. If you press the R key during a VoIP call the signal will be sent to the server.

Precondition:

u DTMF reminders via SIP info messages is activated, i.e. the SIP Info option on this web u The S key is not used for call transfer, i.e. Use the R key to initiate call transfer with the SIP

page is activated.

Open the following Web page: Settings Telephony Advanced Settings.

Area Hook Flash (R-key)

Refer method. = No is set for call transfer ( Page 22). If one of these preconditions is not fulfilled, the field in the Hook Flash (R-key) area is hidden.
In the Application Type (maximum 31 characters) and Application Signal fields (maximum Now select Set to save your settings.
15 characters), enter the data that you have received from your VoIP provider. The setting for the S key applies to all registered handsets.
Configuring the S key for call diversion (call transfer)
If you are transferring calls via VoIP connections, you can connect the two external callers (provider-dependent). You can configure settings for this type of call transfer.

Area Call Transfer

Use the R key to initiate call transfer with the SIP Refer method. If you select Yes, the external parties you are toggling between will be connected when you press the R key S. Your connections with the parties will be terminated.
u You can also activate the Transfer Call by On-Hook option. In this case, the two external
parties are connected with one another when you press the end call key a. To do so, you must use the Web configurator to define the preferred protocol to be used for call diversion ( user guide for your phone). u If you have deactivated both options, i.e. both Use the R key to initiate call transfer with the SIP Refer method. and Transfer Call by On-Hook, you can also divert a VoIP call using Options Call Transfer.
Description of new and updated functions Defining local communication ports for VoIP

Use random ports = Yes

SIP port Enter the port number range from which the SIP port is to be dialled. Enter the lowest port number in the port number range in the left-hand field and the highest number in the right-hand field (numbers between 1024 and 49152). This port number range must not overlap the range specified for RTP port. The default range is 5060 to 5076. RTP port Specify a range of port numbers from which the RTP ports are to be dialled. Enter the lowest port number in the port number range in the left-hand field and the highest number in the right-hand field. The default range is 5004 to 5020.
Description of new and updated functions Amendment to "Call signalling and number assignment"
Amendment to "Call signalling and number assignment"
The section amends the sections "Accepting calls", "Web configurator Assigning send and receive numbers to handsets" and "Web configurator Assigning receive numbers to the answering machine" in the user guide for your Gigaset VoIP phone.
Signalling incoming calls
If you have not assigned any receive numbers, either to the answering machine or the registered handsets, calls to all connections will be signalled on all handsets. If you have assigned receive numbers, your handset will only indicate calls to receiving numbers assigned to this handset. Please note the following cases: u If the phone number is not assigned to a handset or an answering machine as a receive number, all calls to this number are signalled on all handsets. u If the phone number is not assigned to a handset, but is assigned to the answering machine, the call is not signalled on any handset and is accepted by the answering machine. u Calls to your phone's IP address are signalled on all handsets.
Amendment to "Searching in the online directory"
This section amends the section "Using the directory and lists Using online directories" in the user guide for your Gigaset VoIP phone.
Entering the town/city name when searching for an entry
To avoid repeated entries, the names of the last five towns/cities entered are displayed in the City field. You can select the displayed name of the town/city with s and confirm with OK or You can enter a new name.
Description of new and updated functions Amendment to "Changing the display language"
Amendment to "Changing the display language"

The section amends the section "Handset settings Changing the display language" in the user guide for your Gigaset VoIP phone.
Parts of the menu are not displayed in the language selected.
.and three or more handsets are registered on your base. The language set on at least three handsets is not a standard language of the base. The standard base languages are: English, French, German, Italian, Spanish, Portuguese and Dutch. On your base, display texts are only stored for the standard languages. In addition, these display texts can be stored in the base in two other languages or in another language for two different types of Gigaset handsets. When selecting the language on the handset, these texts are downloaded to the base from the Internet. If another non-standard language is set on a third handset, some display texts appear in one of the standard languages on this handset. Both of the non-standard languages are saved on the base, which are set with the lower number of internal numbers. If there is no further handset registered on the base whose type and language setting correspond to an additionally loaded language, then the memory is freed up. If necessary, the language set for another registered handset is loaded onto the base.

Cause:

Amendment to "Automatic firmware update"
This section amends the section "Updating the base firmware Automatic firmware update" in the user guide for your Gigaset VoIP phone. The "Firmware update reminder" described here only applies to devices for which a firmware version more recent than 02.140 was already loaded when the device was bought (manufactured after May 2009).
If you have activated the automatic version check for your phone ( user guide for your phone, Web configurator page Settings Miscellaneous, field Automatic check for software/ profile updates), your phone will check daily whether a newer firmware version is available from the Internet on the Gigaset configuration server. If this is the case, the message New firmware available is displayed when the handset is in idle status and the message key f flashes. If you do not want to perform an update at this time, press the message key f and respond to the prompt Update firmware? with No. The handset switches to idle status. Your phone will then remind you at a later date about the firmware update (New firmware available will be displayed again). Please note If the telephone is not connected to the Internet at the time when the check for new firmware is to be carried out (e.g. because the router is deactivated), the check is carried out as soon as the phone is reconnected to the Internet. Version 4, 29.10.2007

Description of new and updated functions Edited/extended table of VoIP status codes
Edited/extended table of VoIP status codes
This table replaces the table of VoIP status codes provided in the appendix of the user guide for your telephone.
In the following tables you will find the meaning of the most important status codes and messages.
Status Meaning code IP configuration error: IP domain not entered. IP configuration error: SIP user name (Authentication Name) not entered. This is shown, for example, when dialling with a line suffix, if no connection is configured for the suffix on the base. IP configuration error: SIP password (Authentication password) not entered. The called party can be reached under several phone numbers. If the VoIP provider supports this, a list of the phone numbers is transmitted as well as the status code. The caller can select to which number he wants to make the connection. Permanently redirected. The called party can no longer be reached under this number. The new number is transferred to the phone together with the status code, and the phone then no longer accesses the old number but dials the new address immediately. Temporarily redirected. The phone is informed that the called party cannot be reached under the dialled number. The call is redirected for a limited period. The phone is also notified of the length of the redirection. The query is sent to a different "proxy server", e.g. to balance incoming queries. The phone will once again make the same query to another proxy server. This is not a redirection of the address per se. Other service: The query or call could not be transferred. But the phone is notified what other options there are to be able to connect the call. Wrong call Not authorised The requested service is not supported by the VoIP provider. Wrong phone number. No connection on this number. Example: In a local call you have not dialled the area code although your VoIP provider does not support local calls. Method not permitted. Not acceptable. The requested service cannot be provided. Proxy authentication required. The party cannot be reached (e.g. account has been deleted).

34 300

403 404

405 406

407 408
Description of new and updated functions Edited/extended table of VoIP status codes Status Meaning code The requested service is not available from the VoIP provider. Message is too long. URI is too long. Query format is not supported. URI is faulty. Incorrect ending Incorrect ending The requested service is not supported by the VoIP provider. The dialled number is temporarily unavailable. The recipient is not available. Double service query Too many "jumps": The query was rejected because the service server (proxy) has decided that this query has already passed through too many service servers. The maximum number is defined beforehand by the original sender of the query. Wrong number: In most cases this response means that you have simply omitted one or more digits in the phone number. The URI dialled is not unique and cannot be processed by the VoIP provider. The called party is busy. General faults: The call was cancelled before a call was established. The status code confirms receipt of the interruption signal. The server cannot process the query because the data entered in the media description is not compatible. The server notifies that the query will be processed as soon as a previous query has been completed. The server rejects the query because the phone cannot decrypt the message. The sender has used an encryption method that neither the server nor the receiver phone can decrypt. The proxy or the receiving device has discovered a fault while executing the query. It is therefore impossible to execute the query. If this occurs, the caller or the phone displays the fault and repeats the query after a few seconds. The number of seconds after which the query can be repeated may be transmitted to the caller or phone by the receiving device. The query cannot be processed by the recipient because the recipient does not have the functionality that the caller requires. If the recipient understands the query but does not process it because the sender does not have the necessary rights or the query is not permitted in the current context, status code 405 is transmitted instead of 501. In this case, the receiving device that transmits this error code is a proxy or a gateway and has received an invalid response from its gateway via which this query is to be processed.

493 500

Description of new and updated functions Edited/extended table of VoIP status codes Status Meaning code 503 The query cannot be processed by the receiving device or the proxy at present because the server is either overloaded or is being serviced. If it is possible for the query to be repeated in the foreseeable future, the server informs the caller or the phone of this. Time limit exceeded at the gateway. The server rejects the query because the indicated version number of the SIP protocol does not concur with at least the version that is used by the server or SIP device involved in this query. The server rejects the query because the message exceeds the maximum permitted size. The called party is busy. The called party has rejected the call. The called URI does not exist. The communication settings are not acceptable. The called party has hung up. VoIP socket error Connection cancelled because of timeout. Connection interrupted because of a SIP error. SIP memory error. SIP transaction memory error. Busy tone: No codec match between the calling and called party. General socket layer error. General socket layer error: Wrong socket number General socket layer error: Socket is not connected. General socket layer error: Memory error General socket layer error: Socket not available check IP settings/connection problem/VoIP setting incorrect. General socket layer error: Illegal application on the socket interface. No DNS server known. DNS name resolution failed. Insufficient resources for DNS name resolution. URL error.

504 505

924 925
Description of new and updated functions Deleted function: "Send line selection for outgoing calls with */#"
Deleted function: "Send line selection for outgoing calls with */#"
This section relates to the selection of default or non-default connections by adding # or * to the dialled number.
If your purchased telephone came with firmware version 02.140 or later already installed (Manufactured after May 2009), this function is not available. With these devices, it is no longer possible to select the non-default connection by adding an asterisk (*) to the dialled number or to select the default connection by adding a hash symbol (#). However, you can still use the line suffix to select the send line when dialling. If you add #0 to the number, it is dialled via the fixed line network. If you add #1, #2,., #6, the number is dialled via the corresponding VoIP connection. Further information about this can be found in the operating instructions for your telephone.

Dialling with the quick dial keys
If you have assigned a phone number to a number key on the handset as a quick dial number, it is dialled via the default connection if no line suffix is specified. Exception: A dialling plan has been defined for the number
Gigaset IP Phones / IM-NORD EN / A31008-xxxx-xxxx-x-xxxx / HS_menutrees.fm / 3/20/09
Handset menu overviews Gigaset S67H to Gigaset S675 IP, Gigaset S68H to Gigaset S685 IP

Handset menu overviews

Gigaset S67H to Gigaset S675 IP, Gigaset S68H to Gigaset S685 IP
New and updated menus and submenus are marked in orange. Please note that a few digit combinations (shortcuts) for quick entry to the submenus have also changed. They are also marked in orange. 1 Messaging An SMS mailbox (general or private) activated without a PIN 1-1-1 New SMS 1-1-2 Incoming (0) 1-1-3 Draft (0) An SMS mailbox activated with a PIN or 2-3 mailboxes 1-1-1 Mailbox 1-1-1-1 New SMS 1-1-1-2 Incoming (0) 1-1-1-3 Draft (0) 1-1-2 Mailbox 1 to Mailbox 2 1-1-4 Mailbox 3 1-1-2-1 New SMS to 1-1-4-1 1-1-2-2 Incoming (0) to 1-1-4-2 1-1-2-3 Draft (0) to 1-1-4-3 1-1-5 SMS Service 1-1-6 Settings 1-1-6-1 Service Centres 1-1-6-2 SMS Mailboxes 1-1-6-3 Notify Number 1-1-6-4 Notify Type 1-1-6-5 Status Report Version 4, 29.10.2007 1-2 E-mail 1-1 SMS

1-3 Messenger

1-3-1 Buddies 1-3-2 User Status 1-3-2-1 Change Status 1-3-2-2 Info 1-3-3 Messages

Sel. Services

2-1 Info Center 2-2 VoIP

Page 8

2-2-6 Call Diversion 2-2-7 Call Waiting

2-3 Fixed Line

2-3-6 Call Diversion 2-3-7 Call Waiting
*) Menu item Withhold No. is no longer available. It is replaced by 2-6 Next Call.
2-4 Ringback Off 2-5 Always anon. 2-6 Next Call Calls List Add. Features 4-4-2 Bluetooth 4-4-3 Directory 4-6 Missed Appts. 7 Alarm Clock Calendar Resource Dir.

Only for Gigaset S68H

4-3 Room Monitor 4-4 Data Transfer
7-1 Screensavers 7-2 Caller Pictures 7-3 Sounds 7-4 Capacity Version 4, 29.10.2007

Settings

8-1 Date/Time 8-2 Audio Settings 8-2-1 Handset Volume 8-2-2 Ringer Settings 8-2-2-1 Ext. Calls 8-2-2-2 Internal Calls 8-2-2-3 Appointments 8-2-2-4 All 8-2-3 Advisory Tones 8-3 Display 8-3-1 Screen Saver 8-3-2 Colour Scheme 8-3-3 Contrast 8-3-4 Backlight 8-4 Handset 8-4-1 Language 8-4-2 Auto Answer 8-4-3 Register H/Set 8-4-4 Select Base 8-4-5 Area Codes 8-4-6 Reset Handset 8-5 Base 8-5-1 Calls List Type 8-5-1-1 Missed Calls 8-5-1-2 All Calls 8-5-2 Music on hold 8-5-3 System PIN 8-5-4 Base Reset 8-5-5 Add. Features 8-5-5-1 Repeater Mode 8-5-5-2 Access Code 8-5-5-3 Eco Mode 8-5-6 Local Network 8-5-8 Software Update

Page 18

8-6 Voice Mail

8-6-1 Local AM

8-6-1-1 Ans Machine 8-6-1-2 Call Screening 8-6-1-3 Announcements 8-6-1-4 Message Length 8-6-1-5 Recording Quality 8-6-1-6 Ring Delay

8-6-2 Network AM(s)

8-6-2-1 Net AM Fxd. ln. 8-6-2-2 Net AM IP1 :
(dependent on the number of configured VoIP phone numbers and receive numbers on the handset)
8-6-2-7 Net AM IP6 8-6-3 Set Key 1 Local AM Net AM Fxd. ln. Net AM IP1
Net AM IP6 8-7 Telephony 8-7-1 Default Line 8-7-1-1 VoIP 8-7-1-2 Fixed Line 8-7-2 Connection Assist. 8-7-6 Fixed Line 8-7-7 VoIP 8-7-6-2 Recall

Enter system PIN

Show Stat. on HS Select Provider Provider Registr.
Handset menu overviews Gigaset C47H to Gigaset C470/C475 IP
Gigaset C47H to Gigaset C470/C475 IP
New and updated menus and submenus are marked in orange. Please note that a few digit combinations (shortcuts) for quick entry to the submenus have also changed. They are also marked in orange. 1 Messaging An SMS mailbox (general or private) activated without a PIN 1-1-1 New SMS 1-1-2 Incoming (0) 1-1-3 Draft (0) An SMS mailbox activated with a PIN or 2-3 mailboxes 1-1-1 Mailbox 1-1-1-1 New SMS 1-1-1-2 Incoming (0) 1-1-1-3 Draft (0) 1-1-2 Mailbox 1 to Mailbox 2 1-1-4 Mailbox 3 1-1-2-1 New SMS to 1-1-4-1 1-1-2-2 Incoming (0) to 1-1-4-2 1-1-2-3 Draft (0) to 1-1-4-3 1-1-5 SMS Service 1-1-6 Settings 1-1-6-1 Service Centres 1-1-6-2 SMS Mailboxes 1-1-6-3 Notify Number 1-1-6-4 Notify Type 1-1-6-5 Status Report 1-2 E-mail 1-3 Messenger Version 4, 29.10.2007 1-3-1 Buddies 1-3-2 User Status 1-3-2-1 Change Status 1-3-2-2 Info 1-3-3 Messages 39

1-1 SMS

2-4 Ringback Off 2-5 Always anon. 2-6 Next Call Alarm Clock Add. Features

4-3 Room Monitor

Settings 5-2-1 Handset Volume 5-2-2 Ringer Settings 5-2-2-1 Ext. Calls 5-2-2-2 Internal Calls 5-2-2-3 All 5-2-3 Advisory Tones
5-1 Date/Time 5-2 Audio Settings

5-3 Display

5-3-1 Screen Picture 5-3-2 Colour Scheme 5-3-3 Contrast 5-3-4 Backlight

5-4 Handset

5-4-1 Language 5-4-2 Auto Answer 5-4-3 Register H/Set 5-4-4 Reset Handset

5-5 Base

5-5-1 Calls List Type
5-5-1-1 Missed Calls 5-5-1-2 All Calls
5-5-2 Music on hold 5-5-3 System PIN 5-5-4 Base Reset 5-5-5 Add. Features 5-5-5-1 Repeater Mode 5-5-5-2 Access Code 5-5-5-3 Eco Mode 5-5-6 Local Network 5-5-8 Software Update

5-6 Voice Mail

5-6-1 Local AM

(only on C475 IP base)

5-6-1-1 Ans Machine
5-6-1-2 Call Screening 5-6-1-3 Announcements 5-6-1-4 Message Length 5-6-1-5 Recording Quality 5-6-1-6 Ring Delay 5-6-2 Network AM(s) 5-6-2-1 Net AM Fxd. ln. 5-6-2-2 Net AM IP1
5-6-2-6 Net AM IP6 5-6-3 Set Key 1 Local AM

Press Presse Prensa

Munich, 26 April 2010
Interactive Internet applications on Gigaset IP phones
The latest news, e-mails, weather forecasts and the current status of an eBay auction: These and many other useful services can now be used interactively and free of charge on the Siemens Gigaset C470/475 IP, S675 IP and S685 IP quickly and easily, without having to turn on a PC.
The new services can be seen directly on the phones display and custom-configured on www.gigaset.net, the Web portal of Gigaset Communications. The newly designed offerings now also include a text translator, a unit converter and an online encyclopedia. E-mail messages are displayed with their sender, title and a new feature the full text. These new info services complement the already existing and very successful online directory services (i.e. White & Yellow pages), and users are kept up to date by 50 different predefined news feeds from the worlds of business, entertainment, computers and sports.
All Gigaset IP phones are hybrid devices, i.e. they can be used for calls over a fixed network and via the Internet. As a result, the full convenience of DECT cordless phones including power-saving and low-radiation ECO DECT functions are also available for Internet telephony. The online connection is established quickly and easily by plug and play via a cable to the router or gateway.
Users of Gigaset IP phones like the Gigaset S675 and S685 IP also enjoy brilliant broadband sound quality for Internet calls thanks to HDSP (High Definition Sound Performance). Up to six handsets can be registered on the base stations; two calls can be conducted simultaneously over the Internet (multiline) and another over the fixed network. An automatic software update is provided so that the new interactive services can also be used on existing devices. It is compatible with the Gigaset A580 IP, C470/475 IP, S675 IP and S685 IP.
You can find complete information on Gigaset IP phones at www.gigaset.com/nextg.
1/2 Gigaset Communications GmbH P.O. Box 40 D-81307 Munich Corporate Communications Georg Sahnen Hofmannstrae 61 D-81379 Munich

Gigaset S685 IP

Screenshot www.gigaset.net
Gigaset Communications GmbH is one of the worlds largest manufacturers of cordless phones and the clear market leader in Europe for DECT phones. With its headquarters in Munich, the company develops, manufactures and distributes high-quality products under the brand Siemens Gigaset. Its portfolio includes fixed-network phones and Voice over IP devices. The primary production site is in Bocholt, Germany, where the Gigaset products are manufactured under the most stringent quality and environmental standards. Gigaset Communications is a licensee of the Siemens trademark.
Additional press releases are available for download at http://www.gigaset.com/press You can find out more about Gigaset Communications at http://www.gigaset.com
Press contact: Gigaset Communications GmbH Georg Sahnen Head of Corporate Communications Phone: +49 (0)E-mail: georg.sahnen@gigaset.com
2/2 Gigaset Communications GmbH P.O. Box 40 D-81307 Munich Corporate Communications Georg Sahnen Hofmannstrae 61 D-81379 Munich