To remove, press the locking button 8, push the battery cover forwards slightly, and then lift it up and out 9.
Display when charging is in progress.

Charging time

An empty battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 C to +45 C. If the temperature rises/falls 5 C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded.
Additional information Please switch off your phone before removing the battery! 1.8 and 3 volt SIM cards are supported. Please contact your service provider if you have a different card.
left page (12) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Only use the plug-in power supply unit included in delivery!

Entering PIN

The SIM card can be protected with a 4 to 8-digit PIN. Open Slider. Enter the PIN using the number keys. The characters **** appear in the display to ensure nobody can read your PIN. Correct with ]. Press the left soft key to confirm. Logging on to the network will take a few seconds.

Display during operation

Charge level display during operation (emptyfull):
A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly after an uninterrupted charging/discharging cycle. You should therefore not remove the battery unnecessarily and where possible not terminate the charging process before completion. OK
Additional information Changing the PIN..page 17 Clearing SIM card barring.page 18
Switching on/off, PIN entry Additional information The power supply unit heats up when used for long periods. This is normal and not dangerous. If the battery is removed for longer than 30 seconds, the clock must be reset.

Operating time

The operating time depends upon the respective conditions of use. Extreme temperatures considerably reduce the phones standby time. You should therefore avoid leaving the phone in the sun or on a radiator. Talktime: up to 300 minutes Stand-by time: up to 300 hours

Charge icon not visible

If the battery has been discharged fully, the charge icon is not immediately visible when the power supply is plugged in. It will appear after up to two hours. In this case the battery is fully charged after 3 to 4 hours.
Switching on/off, PIN entry

Switching on/off

Press and hold the On/ Off/End key.
right page (13) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)

General instructions

Emergency number (SOS)
Only to be used in real emergencies! By pressing the left soft key SOS you can make an emergency call on any network without a SIM card and without entering a PIN (not available in all countries).

User guide

The following symbols are used to explain operation: Enter numbers, letters. On/Off/End key Call key

Create message Create a message for a selected contact (SMS, MMS, e-mail, Instant Message). Search IM ID Search for assigned Instant Message ID.
right page (33) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Contacts As business crd Define a selected contact as a business card. Business card Establish a contact as your own business card to send to a different GSM-phone. Import Set up readiness to receive via Bluetooth. Add more fields Move SIM card entry to the phone memory. Now all tabs are offered for further entries.
Start a conference with up to five particpants highlighted in advance. The contacts are dialled one after another.
left page (34) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Calls dialled Access to the last numbers you have dialled.
Dial phone number. Display information on the phone number.
Fast access in standby mode.
Delete records The records are deleted.

Call records

A caller's phone number is displayed if the caller has switched off the Hide ID function and the network supports the "Caller Identity" function. Alternatively, a callers name is displayed if it is stored in Contacts. Your phone stores the phone numbers of calls for convenient redialling. Up to 500 entries are stored in the records: Calls missed b The phone numbers of calls that you have received but not answered are stored for call back purposes.
Symbol for missed call (in standby mode). Press the soft key beneath the symbol to bring up the inbox.
C P Select record. I Open record. C Select phone number. I
Calls received Accepted calls are listed.
right page (35) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)

Durat/charges

You can display the charges and duration during a call. You can set a unit limit for outgoing calls.

Charge settings

Currency
(PIN2 prompt) Enter desired currency.

C PDurat/charges

Last call All outg. calls All incom.calls Remaining units (Only shown if supported by your service provider) Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SL75_Hydra_1\out-

Personal rate

(PIN2 prompt) Enter the currency used as well as the charge per unit or time.
Reset Reset all Charge settings

You can use your phone to transmit and receive very long messages (up to 760 characters). They are automatically composed of several "normal" SMS messages (note higher charges). Additionally, you can insert pictures and sounds in an SMS. Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SL75_Hydra_1\out-
CMCreate newSMS Enter text. J You will find information
Options Open menu, then select Add recipient. Enter phone number and save Select recipient from Contacts. Start sending process.
on writing texts with and without T9 in the chapter "Text input", (page 19).

Information about MMS

The Multimedia Messaging Service enables you to send texts, pictures/videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show". Depending on your phone's settings, you will receive either the complete message automatically or notification that an MMS has been saved in the network, giving sender and size details. You may then download it to your phone to read it. Ask your service provider whether this service is available. You may have to register for this separately.
Additional information The following is displayed in the uppermost line: text input status, number of SMS messages required, number of characters still available for the current SMS. If the length of the text exceeds 760 characters, the message is converted into an MMS.
left page (40) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Play back animations and melodies with the media player. When melodies, pictures, videos or animations are added the SMS is converted into an MMS (page 40). Remember that these may be protected (DRM, page 14). Take a picture/ Record video Start camera (page 36). Record sound Start sound recorder (page 98).

Add item

Text You will find information on writing texts with and without T9 in the chapter "Text input", (page 19). Pictures/Videos Add pictures and videos from My stuff or take new ones with the camera. Sound Add melodies from My stuff or record new ones with the sound recorder. Contacts Add address data from Contacts. Attachment Add any files from My stuff.

E-mail address: Your e-mail address, e.g.: name@domain.abc Reply address: Additional e-mail address for replies.
right page (51) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)

WAP push

WAP push messages are transmitted from special service centres. If, for example, you have requested configuration data from your service provider this will be transmitted via WAP push.

Message setup

Message setup CMpush WAP
Options Allow push Open menu, then select Settings. Settings to receive WAP push messages: Allow specific, Allow none, Allow all If Allow specific has been set, the following lists may be edited. All messages whose senders are included in this list are accepted (max. 20 entries possible). All messages whose sender is included in this list are automatically deleted (max. 20 entries possible). Handling of messages whose senders are neither in the white nor the reject list: Reject, Delete
CMWAP push Select the required I message. Read the message or information about the

Inbox options

Different functions are offered depending on the situation. Options Execute Install Accept/ Reject Settings Open menu. Execute program. Start installation. Accept/reject message. Call up settings.

Accept list

transmitted data/programs and, if applicable, trigger a download.

Reject list

Unknown addr.
left page (52) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)

CMInst. message

Login Account Start to make a connection. The access settings are normally preconfigured. If necessary, enter User ID: and Password: to activate access. Please contact your service provider if you do not have access data. Online status Call up the Online status to set your personal attributes (page 97). Saved convers. Access to permanently saved dialogues.
Pop-up info: Activate/deactivate popups for new messages or change the online status, for Inst. message only, if the application is visible.

Inst. message

You can chat with dialogue partners who are also registered for this service on your phone or PC. Your partners are entered in contact lists for this and selected from them for a private or group dialogue. Similarly, you can be invited to a dialogue by other subscribers. GPRS must be switched on.
Conver. history Read all dialogues from the last session offline (deleted next time you log in). Settings Settings for applications and servers. Automatic login: Select your preferred login procedure: e.g. manual or when the phone is switched on. Timeout: Set the timeout in minutes after which Inst. message is put in the background if no action is taken. The session continues and can be called up again via the menu.

History Disconnect File

Setup Exit browser
Calling the function opens the browser with the preset option.

End connection

Browser menu
Options Homepage Open menu. Call up the pre-set homepage of the current profile. List bookmarks Display list of bookmarks stored in the phone. Bookmark site The current page is saved as a bookmark.
Press to clear down the connection and close the browser.
Navigation in the browser
Select a link. Settings, status on/off. Press briefly: go back a level. One input field/link forward/back. Scroll one line.
Display symbols in the browser (selection)
right page (61) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)

Browser settings

History
Display most recently visited Internet sites.
Options Setup Browser Open menu. Select. Set start option as well as handling of pictures and sounds plus send options.

Saved websites

Display list of pages stored in the phone.
Protocol Set protocol parameters, parameters push messages and abort time as well as handling of cookies. Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SL75_Hydra_1\outSecurity Context Set encryption. Reset session; delete cache, history and cookies.

Profiles

Processing depends on the service provider (see page 72).
left page (62) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Meeting Outdoor Car Kit Headset You can name two personal profiles (<Name>).
Additional information To call up the list in standby mode: G profile list is displayed. The active profile is identified with.
Select default profile or personal profile. Activate the profile.
Changing profile settings
Edit a default profile or create a new personal profile:

C TProfiles

Several settings can be stored in a phone profile in order, for example, to adapt the phone to the surrounding level of noise. Six profiles are provided with default settings. They can be changed however: General Vibration
Select profile. Open menu.
Change sett. Select. The list of available functions is displayed. When you have finished setting a function, you return to the profile menu where you can change a further setting.
right page (63) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)

Profile options

Options Activate Change sett. Copy from Rename Open menu. Activate selected profile. Change profile settings. Copy settings from another profile. Change personal profile (except default profiles).

Car Kit

If an original Siemens car kit is used, the profile is switched on automatically when the phone is inserted into the cradle (also see Accessories, page 121).

Apply Start a stored application (e.g. Internet). In standby mode: Press briefly.
right page (75) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Call settings

All calls All calls are diverted. Symbol in the top line of display in standby mode.

C TCall settings

Select function. Hide ID
When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers).
b Unanswered Includes the conditions Not reachable, No reply, Busy, see below.
Not reachable Divert occurs if phone is switched off or is out of range. No reply A call is only diverted after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5-second intervals. Busy Divert occurs if a call is in progress. If Call waiting is activated, you will hear the call waiting tone during a call. Receiving fax b Fax calls are diverted to a number with a fax connection.
To suppress this display, you can enable the "Hide ID" mode for all subsequent calls or just for the next call. You may need to register separately with your service provider for these functions.

Call waiting

If you are registered for this service, you can check whether it is set and you can activate/deactivate it.
Select the condition under which calls should be diverted to your mailbox or another phone number. To set diversion:
b Receiving data Data calls are diverted to a phone number with a PC connection.
Status check You can check the current divert status for all conditions. After a short pause, the current situation is transmitted by the network and displayed.
left page (76) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Any key answer

Incoming calls can be accepted by pressing any key (except for B ).
Clear all All set diverts are cleared.

Minute beep

During the call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient normally does not hear this beep.
Additional information Note that the divert is stored in the network and not in the phone (e.g. when the SIM card is changed). Reactivating divert The last divert has been stored. Proceed as with "Set divert". The stored phone number is displayed. Confirm number.

Alert calls from

Only calls from phone numbers that are in Contacts or on the SIM card or assigned to a group are signalled audibly. Other calls are only displayed.
right page (77) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Phone setup

C TPhone setup
Select function. Language
Display language Set the language for the display text. When Automatic is set, the language of your service provider is used. If a language that you do not understand happens to be set, the phone can be reset to the language of your home service provider with the following input (in standby mode):

Info tones

Set service and alarm tones: On/off Activate/deactivate tones. Extended If switched on, a wider range of service tones is available, e.g.: end of menu, network connection interrupted.

*#0000# A

Automatic switch off
The phone switches off each day at the set time. Switching on Set Select.
Input language Select the language for text input. Languages supported by T9 are marked with the T9 symbol.

User dictionary

T9 import Load database for T9 support for the current language. T9 export Save database for T9 support for the current language to My stuff.
Enter time (24-hour-clock). Save.
Switching off Switch off Select.

Confirm.

left page (78) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
Identity no. The phone identity number (IMEI) is displayed. This information may be useful for customer service. About phone Product name, production date, software version. CC-Monitor Call center monitor.
After their capacities have been checked, all files and folders are displayed along with their size and may be viewed/opened and, if necessary, deleted.
Settings Device test A self-test as well as individual tests are offered. If you select Self-test, all individual tests are carried out. Software version Display the software version for your phone in standby mode: # # press, then E.

File system

Format (Phone-code protected) The phone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted. Formatting may take longer than 1 minute.

Licence manag.

The licensed data or applications can be displayed and managed (see also DRM, page 14).

Memory assist.

The memory assistant will help you if there is insufficient phone memory. If required it can also be started automatically from applications.

Select Set. Enter time in minutes and seconds after which the keypad lock is to be activated.
(PIN2 or phone-code protected) Dialling options are restricted to SIMprotected phone numbers in the Phonebook. If only area codes are entered, relevant phone numbers can be added to these manually before dialling. If the SIM card does not support PIN2 input, the whole Phonebook can be protected with the phone code.

This SIM only

ProSlide lock
Enable/disable automatic keylock when closing the slider. The keys are always unlocked automatically when opening the slider. Additional information The keypad can also be locked and unlocked directly in standby mode. In each case:
(PIN2 or phone-code protected) The phone can be connected to a SIM card once the phone code is entered. Unless the phone code is known the phone will not operate with a different SIM card. If the phone is to be used with a different SIM card, enter the phone code when requested.

Press and hold.

left page (82) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
Outgoing intl. (Outgoing international) Only national calls can be made. Out.int.x.home (International outgoing without home country) International calls are not permitted. However you can make calls to your home country when abroad. All incoming The phone is barred for all incoming calls (forwarding all calls to mailbox provides a similar effect).
Settings When roaming You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls. Status check Status check for network barrings. Clear all All barrings are deleted. A password which the service provider will give you is necessary for this function.
For description, see page 12: PIN control, Change PIN, Change PIN2, Chg. phonecode

Barrings

Barring restricts the use of your SIM card (this is not supported by all service providers). You need a 4-digit network password for network barring which your service provider will give you. You may need to be registered separately for each barring. All outgoing All outgoing calls except emergency numbers are barred.
right page (83) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Network

Network info
The list of GSM networks currently available is displayed. Indicates forbidden service providers (depending on SIM card).

C TNetwork

Select function. b
This function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone. Select line Change the connection. Display the current phone number.

Choose netwrk

Network search takes place again if, for example, you leave your home network or want to register on a different network. The search can take place in Manual (see Network info) or Automatic mode (see also Preferred netw.).
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SL75_Hydra_1\outProtected

(Phone-code protected)

Preferred netw.
Enter your preferred service providers here in order of preference for when you leave your home network (e.g. if there are differences in price). The current service provider is displayed.
You may limit usage to one phone number. Additional information Special settings may be made for each phone number (e.g. ringtones, call diversion etc.). To do this, first switch to the required phone number.

<Empty>

Show list of preferred networks. Select.
left page (84) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Band selection

Let it set automatically or select either GSM 900, GSM 1800, or GSM 1900. Make sure that your service provider also supports the selected band.
All outgoing In addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted. Pref. group If activated, calls may only be made within this standard user group (depending on the network configuration).

Fast search

When this function is active, network reconnection is speeded up (standby time is reduced).
Settings Confirm change, then select a new service provider from the list. Record service provider again (last entry in the list): Furth.network Select, enter the provider data and save it.

User group

Depending on your service provider, you can create groups with this service. These have access, for example, to internal (company) information, or special tariffs apply to them. The details can be clarified with your service provider. Active Activate/deactivate function. "User group" must be deactivated for normal phone use. Select group You can select or add groups other than preferred groups (see below). Code numbers for the groups are obtained from your service provider.

Standby time is too Frequent use of organiser and short. games. Fast search activated. Display illumination switched on. Unintentional keystrokes (illumination!).
Restrict use if applicable. Deactivate speed search (page 84). Switch off display illumination (page 66). Switch on Auto key lock (page 81).

Questions & Answers

If you have any questions about using your phone, visit us anytime at www.siemens.com/mobilephonescustomercare.For additional help, we have listed below some frequently asked questions and answers. Configuration service To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet, you can use a configuration service. This service is used to have the necessary settings for your mobile phone sent to you by SMS. We recommend that you contact your network provider who will send you the configuration messages. As an alternative you can also use the "Setting Configurator" at www.siemens.com/mobilephonescustomercare. Siemens will then send you the configuration messages. Please follow the instructions contained in those messages. Problem Poss. causes Possible solution
right page (113) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
Questions & Answers Problem
Charging error (charge icon not displayed).

Poss. causes

Battery totally discharged.

Possible solution

1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours. 3) Charge battery. Make sure the ambient temperature is right, wait for a while, then recharge. Check power supply and connection to the phone. Check battery contacts and telephone connection socket, clean them if necessary, then insert battery again. Use different mains power socket, check mains voltage. Only use original Siemens accessories. Replace battery. Check that the SIM card is inserted correctly (page 10). Clean SIM card with a dry cloth. Use 3V SIM cards only. Carry out a visual check. Have service provider change the SIM card. Move higher, to a window or an open space. Check service providers coverage area. Complain to the service provider. Try manual selection or select a different network (page 83). Check network barrings (page 82). Try again later. Reconnection to another service provider is automatic (page 83). Switching phone off and on again can speed this up. Set line 1 (page 84). Check for new barrings. Reset limit with PIN2 (page 35). Load credit. Barrings can be set by service provider. Check barrings (page 82).

left page (124) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
Guarantee certificate (IRL)
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturers Guarantee under the conditions set out below: In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casings, small parts on casings, protective coverings where included in the scope of delivery), this warranty shall be valid for six months from the date of purchase. This Guarantee shall be invalid if the device defect is attributable to improper care or use and/or failure to comply with information contained in the user manuals. In particular claims under the Guarantee cannot be made if: The device is opened (this is classed as third party intervention) Repairs or other work done by persons not authorised by Siemens. Components on the printed circuit board are manipulated The software is manipulated Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.) Devices fitted with accessories not authorised by Siemens This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the Republic of Ireland the Guarantee is issued by Siemens Ireland Limited, Ballymoss Road, Sandyford Industrial Estate, Dublin 18 - The Republic of Ireland. Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturers liability for death or personal injury resulting from its negligence. The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. The above provisions does not imply a change in the burden of proof to the detriment of the customer.

right page (129) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Menu tree

Contacts > All contacts Groups Online status SIM Filter Call records > Calls missed Calls received Calls dialled Delete records Time/charge > Last call All incom.calls All outg. calls Remaining units Charge settings Internet > URL/service provider Downl. assist. Enter URL Bookmarks Internet History Saved websites Camera > Take a picture Record video Messages > Create new > SMS text MMS E-mail
left page (130) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
Read new CB Topic list Auto display Use topic index CB languages Msg. archive > SMS,MMS E-mail Templates > Text modules MMS templates Message setup > Text zoom Emoticons Save after send General sett. SMS setup MMS setup E-mail setup WAP push set.
> Inbox > SMS, MMS E-mail Draft > SMS,MMS E-mail Sent > SMS,MMS E-mail Outbox Inst. message Voice mailbox WAP push CB services > Receive CB > SMS,MMS E-mail

Messages

right page (131) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
Organiser > Calendar Appointments Tasks Notes Games Media player Alarm clock Extras Dictat.machine Time zones Remote sync. > SIM services My applications Calc. Unit converter Online status
Sound recorder Stopwatch Countdown Date calculator My stuff Setup My menu > Profiles Ringtones
> Volume Calls Messages Organiser Alarm clock Inst. message Games Startup melody Shutdown mel. Pro Slide open ProSlide close Sound recorder
left page (132) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
EGPRS EGPRS info Bluetooth setup Online settings Fax/data Shortcuts > Shortc.Softkeys Navigation keys Number keys Key tones Call setup > Hide ID Call waiting Divert Call screening Any key answer Minute beep
> Themes Display setup
> Wallpaper Logo Screensaver Start up anim. Shutdown anim. Own greeting Big letters Illumination Contrast
Vibration Phone Pilot Connectivity > Bluetooth
right page (133) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)

Setup > Phone setup > Language User dictionary Key tones Info tones Auto off Memory assist. File system Licence manag. Phone identity Device manag. Master reset Clock > Time/date Time zones Time format Date format Begin of week Buddhist year Show clock Auto time Security > Auto key lock ProSlide lock Direct call Only PIN codes This SIM only Barrings
left page (134) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:48)
> Network > Line Network info Choose netwrk Auto network Preferred netw. Band selection Fast search User group Accessories > Car Kit Headset USB charging
right page (135) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Accept list.. 51 Accessories.. 121 Addressbook New entry.. 29 Alarm.. 89 Alarm clock.. 102 Alert calls from.. 76 All calls (diversion).. 75 All incoming (network barrings).. 82 Any key to answer.. 76 Appointments.. 88 Auto display Clock... 80 Time/charges.. 35 Auto key lock.. 81 Auto last number redial.. 24 Call back.. 24 Call divert.. 75 Call settings.. 75 Call transfer.. 27 Call waiting.. 25, 75 Calling.. 23 Calls received (call record). 34 Camera... 36 Car kit Setting.. 85 Care of phone.. 118 CB services... 58 Certificates... 82 Charges... 35 Charges/units.. 35 Charging the battery. 11 Charging via USB.. 86 Clock.. 80 Codes.. 17 Conference.. 26 Connection profiles.. 72 Connectivity.. 69 Contrast.. 66 Converter.. 96 Countdown.. 100 Credit limit... 35 Currency converter.. 97
Band selection. 84 Battery Charging.. 11 Inserting... 10 Operating times.. 12, 119 quality declaration. 118 Big letters.. 66 Bluetooth.. 69 Bookmarks (WAP).. 59, 60 Browser... 60 Buddhist year.. 80
Date format.. 80 Device manager.. 79 Dialling code.. 23 Dialling with number keys. 23 Dictating machine.. 91 Digital Rights Management.. 14 Direct reply (SMS). 44 Display Illumination.. 66 Language.. 77 Symbols.. 8 Wallpaper.. 66 Divert.. 75 DTMF tones (tone sequences). 28 Duration/charges.. 35
Calculator.. 95 Calendar.. 87 Call Accepting/ending.. 24 Blocked.. 82 Charges.. 35 Conference.. 26 Diverting.. 75 Ending.. 23 Menu.. 27 Putting on hold. 25 Rejecting.. 25 Toggling (swapping).. 25