NOTICE OF FUNCTION CHANGE DP1 firmware version 2.00

ADDITIONAL FUNCTION.3

Customizing the Digital Zoom Button function
It is possible to allocate different functions such as [ISO Setting] from [ buttons (the Digital Zoom Button). Shooting Menu ] to the
The following new functions were added to the DP1 camera with the new Firmware update (Firmware version 2.00).
CHANGE THE COLOR LCD MONITOR INDICATION.
1. If [Auto] is selected from [ISO Setting], ISO AUTO will

be displayed.

2. If [Auto] is selected from [White Balance], AWB will be
Shooting Menu] There are 15 available functions with the exception of [Color space] in the [ (P.28-29 of the instruction manual) menu and OFF which are unavailable. Shooting If firmware Ver.1.04 or above is installed, [ Digital Zoom ] will not be displayed in [ Menu ]. If you wish to use the digital zoom, please select [Digital Zoom] from the [ Zoom Button Settings ] menu.
displayed. 3. The location of the Auto Bracket icon has been changed to the upper left of the monitor. 4. The ft (feet) indicator has been added to the scale bar in MF mode.

How to set:

Press the

button. button. button.

To open the [ Set Up] menu, press the

Use the

buttons to select the [ Zoom Button Settings ] menu and press the buttons to select the desired setting and press the button.
CHANGE THE REVIEW DISPLAY INDICATION
When the image is magnified in the review display, the magnification ratio will appear.
In the case of 2.5 times magnification, monitor. X2.5 will be displayed in the upper left corner of the
Set Both Buttons Wide Button Setting
It is possible to allocate the same function to both buttons. The setting will change by pressing

buttons. button.

ADDITIONAL FUNCTION.1
The Grid Display mode for still picture taking is added to the LCD monitor.
(If firmware Ver. 2.00 is updated from Ver.1.01 or Ver.1.02, the Grid Display will show Display Icons. It will not be possible to hide the icons when the camera is in the Grid Display after upgrading to Ver. 2.00.) Please refer to page 32 of the instruction manual. By pressing the button, it is possible to display the grid. During picture shooting mode, each time the button is pressed, the color LCD monitor display will change as follows. Display Icons Grid Display Hide Icons LCD Monitor OFF

Tele Button Setting

It is possible to allocate different functions to the button and The setting will change by pressing the allocated button.
Use the buttons to select the desired icon and then press the button to apply the setting. The available settings are limited depending on the selected shooting mode. (Unavailable icons will be turned grey.) According to the selected function, the setting will be changed as buttons. follows by pressing the Set Both Buttons ISO Setting, Image Size, Image Quality, White Balance*, Color Settings, Drive Mode Metering Mode Auto Bracket, Contrast, Sharpness, Saturation Image With Sound Digital Zoom Wide Button Setting Tele Button Setting

The selected icon can be changed. (Example)Image Quality

Notice

The grid display cannot be used in MF mode and movie mode.

FINE NORM BASIC RAW

ADDITIONAL FUNCTION.2
Addition of ISO 50 sensitivity
ISO 50 can provide exceptional results with the fine detail and lower noise. Please see DP1 USERS MANUAL P.53 for information regarding SETTING THE SENSITIVITY. Notice ISO 50 has a narrow dynamic range and therefore may blow out highlight detail such as brightness or high saturation areas. Please ensure pictures are taken with the correct exposure setting. If it will not be possible to capture sufficient results, please adjust the EV setting to the minus side for a little more protection of the highlights. If [Auto] is selected, it will not change to ISO 50 automatically. Regardless the firmware version, ISO value is change to ISO 100 or 200 in normal shooting, or to ISO 100, 200 or 400 automatically when using the flash.
The value will be displayed next to the selected icon, and can be changed. The value will disappear 2 seconds after being set. Only the icon will be displayed. (If the setting values is 0, the icon will be hide as well) OFF (Hide icon) ON ( )
Press the button to increase magnification. Press to increase magnification When the button is pressed passed the maximum ratio, the magnification will to decrease magnification. or return to the original ratio. AF area will change as follows.

AF Area

*When Custom White Balance is selected, the previous stored setting will be used. To capture a new custom white balance, please refer to P.52 for information regarding Setting a Custom White Balance.

NOTICE OF FUNCTION CHANGE DP1 firmware version 1.04

ADDITIONAL FUNCTION.3

Customizing the Digital Zoom Button function
It is possible to allocate different functions such as [ISO Setting] from [ buttons (the Digital Zoom Button). Shooting Menu ] to the
The following new functions were added to the DP1 camera with the new Firmware update (Firmware version 1.04).
CHANGE THE COLOR LCD MONITOR INDICATION.
1. If [Auto] is selected from [ISO Setting], ISO AUTO

will be displayed.

2. If [Auto] is selected from [White Balance], AWB will
There are 15 available functions with the exception of [ Color space ] in the [ Shooting Menu ] (P.28-29 of the instruction manual) menu and OFF which are unavailable. If firmware Ver.1.04 or above is installed, [ Digital Zoom ] will not be displayed in [ Shooting Menu ]. If you wish to use the digital zoom, please select [Digital Zoom] from the [ Zoom Button Settings ] menu. How to set:

be displayed.

3. The location of the Auto Bracket icon has been
changed to the upper left of the monitor. 4. The ft (feet) indicator has been added to the scale bar in MF mode. 4

Press the

button. Set Up] menu, press the button.

To open the [

Use the buttons to select the [ Zoom Button Settings ] menu and press the button.

ADDITIONAL FUNCTION.1

The Grid Display mode for still picture taking is added to the LCD monitor.
(If firmware Ver. 1.04 is updated from Ver.1.01 or Ver.1.02, the Grid Display will show Display Icons. It will not be possible to hide the icons when the camera is in the Grid Display after upgrading to Ver. 1.04.) Please refer to page 32 of the instruction manual. By pressing button, it is possible to display the grid. the During picture shooting mode, each time the button is pressed, the color LCD monitor display will change as follows. Display Icons Grid Display Hide Icons LCD Monitor OFF Notice The grid display cannot be used in MF mode and movie mode.

Use the press the

buttons to select the desired icon and then button to apply the setting.
The available settings are limited depending on the selected shooting mode. (Unavailable icons will be turned grey.) According to the selected function, the setting will be changed as follows by pressing the buttons. ISO Setting, Image Size, Image Quality, White Balance*, Color Settings, Drive Mode, Metering Mode Auto Bracket, Contrast, Sharpness, Saturation Image With Sound Digital Zoom
The selected icon can be changed. (Example)Image Quality FINE NORM BASIC RAW The value will be displayed next to the selected icon, and can be changed. The value will disappear 2 seconds after being set. Only the icon will be displayed. (If the setting values is 0, the icon will be hide as well) OFF (Hide icon) ON ( ) Press to increase magnification or magnification. AF area will change as follows. to decrease

ADDITIONAL FUNCTION.2

Addition of ISO 50 sensitivity
ISO 50 can provide exceptional results with the fine detail and lower noise. Please see DP1 USERS MANUAL P.53 for information regarding SETTING THE SENSITIVITY. Notice ISO 50 has a narrow dynamic range and therefore may blow out highlight detail such as brightness or high saturation areas. Please ensure pictures are taken with the correct exposure setting. If it will not be possible to capture sufficient results, please adjust the EV setting to the minus side for a little more protection of the highlights. If [Auto] is selected, it will not change to ISO 50 automatically. Regardless the firmware version, ISO value is change to ISO 100 or 200 in normal shooting, or to ISO 100, 200 or 400 automatically when using the flash.

AF Area

*When Custom White Balance is selected, the previous stored setting will be used. To capture a new custom white balance, please refer to P.52 for information regarding Setting a Custom White Balance.