If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function. Do not place heavy or unstable objects on the player. Do not place any objects other than discs on the disc tray. Doing so may cause damage to the player or the object. Take out any discs when you move the player. If you dont, the disc may be damaged. Disconnect the AC power cord and all other cables from the player when you move the player.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, your ears and the speakers may be damaged when a peak level section is played.
On connecting to the HDMI OUT jack
Observe the following as improper handling may damage the HDMI OUT jack and the connector. Carefully align the HDMI OUT jack on the rear of the player and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
On cleaning discs, disc/ lens cleaners
Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.

On power sources

The player is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the player itself has been turned off. Disconnect the player from the wall outlet if you are not going to use the player for a long time. To disconnect the AC power cord, grasp the plug itself; never pull the cord. Observe following points to prevent the AC power cord being damaged. Do not use the AC power cord if it is damaged, as doing so may result in an electric shock or fire. Do not pinch the AC power cord between the player and wall, shelf, etc. Do not put anything heavy on the AC power cord or pull on the AC power cord itself.

On replacement of parts

In the events that this player is repaired, repaired parts may be collected for reuse or recycling purposes.
Be sure to disconnect the HDMI cable when moving the player.
Hold the HDMI connector straight when connecting or disconnecting the HDMI cable. Do not twist or force the HDMI connector into the HDMI OUT jack.

IMPORTANT NOTICE

Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or onscreen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.
If you have any questions or problems concerning your player, please consult your nearest Sony dealer.
Important Safety Instructions
1) 2) 3) 4) 5) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11)Only use attachments/ accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Step 1: Preparing the Player
Checking the supplied accessories
Check that you have the following items: Audio/video cable (phono plug 3) (1) HDMI cable (1) (BDP-BX57 only) Remote commander (remote) (1) Size AA (R6) batteries (2)

Preparing the remote

Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment.
Step 2: Connecting the Player
Do not connect the AC power cord until you have made all the connections.

Connecting to your TV

Select one of the following connection methods according to the input jacks on your TV. Match the color of the plug to that of the jack when connecting.

High quality

HDMI cable*
Audio/video cable (supplied)
Component video cable (not supplied)

Standard quality

* See Checking the supplied accessories (page 11).
Do not connect the player through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.
Connecting to your AV amplifier (receiver)
Select one of the following connection methods according to the input jacks on your AV amplifier (receiver). When you select A or B, make the appropriate settings in the Audio Settings setup (page 23).

HDMI cable*1

HDMI cable (not supplied)
t Set BD Audio MIX Setting (page 23). Coaxial digital cable (not supplied)
Optical digital cable (not supplied) t Set Dolby Digital (Coaxial / Optical)*2 (page 23) and DTS (Coaxial / Optical)*3 (page 23).
See Checking the supplied accessories (page 11).

Step 3: Easy Setup

When turned on for the first time
Wait for a short while before the player turns on and starts Easy Setup.
Plug the player into the AC outlet.

to AC outlet

Press [/1 to turn on the player.
Turn on the TV, then switch the input selector on your TV so that the signal from the player appears on your TV screen.

Perform Easy Setup.

Follow the on-screen instructions to make the basic settings using </M/m/ , and ENTER on the remote.

</M/m/, ENTER

Items Top Menu Menu/Popup Menu Title Search
Details Displays the BDs or DVDs Top Menu. Displays the BD-ROMs Pop-up Menu or DVDs menu. Searches for a title on BDROMs/DVD VIDEOs and starts playback from the beginning. Searches for a chapter and starts playback from the beginning. Switches to other viewing angles when multi-angles are recorded on BD-ROMs/ DVD VIDEOs. Adjusts the picture quality of Internet content.

Chapter Search Angle

IP Content Noise Reduction

(Photo) only

Items Slideshow Speed Slideshow Rotate Left Details Changes the slideshow speed. Plays a slideshow. Rotates the photo counterclockwise by 90 degrees. Rotates the photo clockwise by 90 degrees.

Rotate Right

Using the Settings Displays
Select (Setup) on the home menu when you need to change the settings of the player. The default settings are underlined.
Select (Setup) on the home menu using </,. Select the setup category icon using M/m, and press ENTER.
Icon Explanation Network Update (page 21) Updates the software of the player. Screen Settings (page 21) Makes the video settings according to the type of connecting jacks. Audio Settings (page 23) Makes the audio settings according to the type of connecting jacks. BD/DVD Viewing Settings (page 24) Makes detailed settings for BD/ DVD playback. Parental Control Settings (page 24) Makes detailed settings for the Parental Control function. Music Settings (page 25) Makes detailed settings for Super Audio CD playback. System Settings (page 25) Makes the player-related settings. Network Settings (page 26) Makes detailed settings for the Internet and network. Easy Setup (page 27) Re-runs the Easy Setup to make the basic settings. Resetting (page 27) Resets the player to the factory settings.

Network Update

Select OK to update the players software via the network.
z We recommend the network update every 2 months or so. For information about update functions, visit the following website: http://www.sony.com/bluraysupport/

Screen Settings

BD Parental Control Subtitle
Selects the default subtitle language for BDROMs or DVD VIDEOs. When you select Select Language Code, the display for entering the language code appears. Enter the code for your language by referring to Language code list (page 37). Playback of some BD-ROMs can be limited according to the age of the users. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.

DVD Parental Control

Playback of some DVD VIDEOs can be limited according to the age of the users. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.
BD Hybrid Disc Playback Layer
BD DVD/CD Plays BD layer. Plays DVD or CD layer.

BD Internet Connection

Allow Do not allow Normally select this. Prohibits Internet connection.
Internet Video Parental Control
Playback of some Internet videos can be limited according to the age of the users. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.

BD Data Jack Selection

Internal memory USB device (rear) Stores the BD data in the internal memory. Stores the BD data in the USB memory connected to the USB jack (rear).

Internet Video Unrated

Allow Block Allows the playback of unrated Internet videos. Blocks the playback of unrated Internet videos.

Music Settings

Super Audio CD Playback Layer
Super Audio CD CD Plays the Super Audio CD layer. Plays the CD layer.

System Settings

Selects your language for the player onscreen displays.

Dimmer

Bright Dark Off Bright lighting. Low lighting. Turns off the lighting during playback. Low lighting other than during playback. Settings and Adjustments
Super Audio CD Playback Channel
DSD 2ch DSD Multi Plays the 2ch area. Plays the multi-channel area.

Control for HDMI

On Allows you to use the Control for HDMI function (page 34). Turns off the function.

Quick Start Mode

On Off Shortens the startup time when turning on the player. Reduces standby power consumption.

Auto Display

On Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc. Displays information only when you press DISPLAY.

Screen Saver

On Turns on the screen saver function. The screen saver image appears when you do not use the player for more than 10 minutes while an onscreen display is displayed. Turns off the function.
Software Update Notification
On Sets the player to inform you of newer software version information (page 21). Turns off the function.

Network Settings

Internet Settings
Connect the player to the network beforehand. For details, see Connecting to the Network (page 15).
View Network Status Wired Setup

Gracenote Settings

Auto Automatically downloads disc information when disc playback stops. Connect to the network for downloading. Downloads the disc information when Playback History List or Information Display is selected in the options menu.
Displays the current network status. Select this when you connect to a broadband router directly.
Select this when you use a wireless LAN router. For further details, visit the following website and check the FAQ contents: http://www.sony.com/ bluraysupport/

Manual

DivX(R) VOD (Canada models only)
For details, visit the following website: vod.divx.com
Network Connection Diagnostics
You can run the network diagnostic to check if the network connection has been made properly.

System Information

Displays the players software version information and the MAC address.
BD Remote Device Registration
Registers your BD Remote device.
Registered BD Remote Devices
Displays a list of the registered your BD Remote devices.

Easy Setup

Re-runs the Easy Setup to make the basic settings. Follow the on-screen instructions.

Resetting

Reset to Factory Default Settings
You can reset the player settings to the factory default by selecting the group of settings. All the settings within the group will be reset.
Initialize Personal Information
You can erase your personal information stored in the player.

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

Picture

There is no picture or the picture is not output correctly.
, Check that all the connecting cables are securely connected (page 12). , Switch the input selector on your TV to display the signal from the player. , Reset the video output resolution to the lowest resolution by pressing x on the player for more than 10 seconds. , For HDMI connections, try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then reconnect the HDMI cable. , The HDMI OUT jack is connected to a DVI device that does not support copyright protection technology. , For HDMI connections, check the Output Video Format settings in the Screen Settings setup (page 22). , When the analog signals are also output, set BD/DVD-ROM 1080/24p Output to Off in the Screen Settings setup (page 22). , For BD-ROMs, check the BD/DVD-ROM 1080/24p Output setting in the Screen Settings setup (page 22).
The display language on the screen switches automatically when connected to the HDMI OUT jack.
, When Control for HDMI is set to On (page 25), the display language on the screen automatically switches according to the language setting of the connected TV (if you change the setting on your TV, etc.).
There is no sound or the sound is not output correctly.
, Check that all the connecting cables are securely connected (page 12). , Switch the input selector on your AV amplifier (receiver) so that the audio signals of the player are output from your AV amplifier (receiver). , If the audio signal does not come through the DIGITAL OUT (OPTICAL/ COAXIAL)/HDMI OUT jack, check the audio settings (page 23). , For HDMI connections, try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then reconnect the HDMI cable. , For HDMI connections, if the player is connected to a TV through an AV amplifier (receiver), try connecting the HDMI cable directly to the TV. Refer also to the instruction manual supplied with the AV amplifier (receiver). , The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals). , The device connected to the HDMI OUT jack does not support the audio format of the player. Check the audio settings (page 23).

You cannot connect your PC to the Internet after Wi-Fi Protected Setup (WPS) is performed.
, The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly.
You cannot connect the player to the wireless LAN router.
, Check if the wireless LAN router is on. , Depending on the surrounding environment, such as the wall material, radio wave receiving condition, or obstacles between the player and the wireless LAN router, the communication distance may be shortened. Move the player and the wireless LAN router closer to each other. , Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt the communication. Move the player away from such devices, or turn off such devices.
The desired wireless router is not detected even if Scan is performed.
, Press RETURN to return to the previous screen, and try Scan again. If the desired wireless router is still not detected, press RETURN to select Manual registration.
The message A new software version has been found on the network. Perform update under "Network Update." appears on the screen when turning the player on.
, See Network Update (page 21) to update the player to a newer software version.

Others

Playback does not start from the beginning of content.
, Press OPTIONS, and select Play from beginning.
Exxxxx or FAN ERR appears on the front panel display.
, When Exxxxx appears, contact your nearest Sony dealer or local authorized Sony service facility and give the error code. , When FAN ERR appears, try the following: 1Check that the ventilation holes on the rear of the player are not blocked. 2Place the player in a location with adequate ventilation to prevent heat build-up in the player.
Playback does not start from the resume point where you last stopped playing.
, The resume point may be cleared from memory depending on the disc when you open the disc tray. you disconnect the USB device. you play other content. you turn off the player.
The player does not respond to any button.

, Moisture has condensed inside the player (page 4). , Hold down [/1 on the player for more than 10 seconds until the indicators on the front panel display turn off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. Additional Information
The disc tray does not open and LOCKED or TLK ON appears on the front panel display.
, When LOCKED appears, the player is locked. To cancel the Child Lock, hold down N on the player until UNLOCK appears on the front panel display (page 8). , When TLK ON appears, contact your Sony dealer or local authorized Sony service facility.
The disc tray does not open and you cannot remove the disc even after you press Z.
, Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5When WAIT appears on the front panel display, hold down [/1 on the player for more than 10 seconds until the player turns on again.

General

Specifications

System

Laser: Semiconductor laser

Inputs and outputs

(Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/18 dBm (wave length 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/ PB, PR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal USB: USB jack Type A (For connecting a USB memory, memory card reader, digital still camera, and digital video camera)
Power requirements: 120 V AC, 60 Hz Power consumption: 24 W Dimensions (approx.): 430 mm 219 mm 46 mm (17 in. 8 5/8 in. 1 13/16 in.) (width/depth/height) incl. projecting parts Mass (approx.): 2.3 kg (5 lb 1 1/8 oz) Operating temperature: 5 C to 35 C (41 F to 95 F) Operating humidity: 25 % to 80 %

Supplied accessories

See page 11.
Specifications and design are subject to change without notice.

Playable discs

Blu-ray Disc*1 DVD*3 BD-ROM BD-R*2/BD-RE*2 DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD

Wireless

Wireless LAN standard: IEEE802.11a/b/g/n Frequency range: U.S. models: 2.4 GHz band: Channels 1-GHz band: Channels 36-64, 100-140, 149-165 Canada models: 2.4 GHz band: Channels 1-GHz band: Channels 36-64, 100-116, 132-140, 149-165 Modulation: DS-SS Modem and OFDM Modem
Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. The audio output differs depending on the source, connected output jack, and selected audio settings. *2 BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type) The BD-Rs recorded on a PC cannot be played if postscripts are recordable. *3 A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the instruction manual supplied with the recording device.

Discs that cannot be played
BDs with cartridge DVD-RAMs HD DVDs DVD Audio discs PHOTO CDs Data part of CD-Extras VCDs/Super VCDs Audio material side on DualDiscs A disc recorded in a color system other than NTSC, such as PAL (this player conforms to the NTSC color system).

Playable types of files

File format MPEG-1 Video/PS MPEG-2 Video/PS, TS*1 DivX*2 MPEG-4 AVC*1
Extensions.mpg,.mpeg,.m2ts,.mts.avi,.divx.mkv,.mp4,.m4v,.m2ts,.mts.wmv,.asf

Note on Discs

This product is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this product.

WMV9*1 AVCHD

File format Extensions
MP3 (MPEG-1 Audio.mp3 Layer III) AAC*1*4 WMA9 Standard*1*4 LPCM.m4a.wma.wav
Note on playback operations of BDs/DVDs
Some playback operations of BDs/DVDs may be intentionally set by software producers. Since this player plays BDs/ DVDs according to the disc contents the software producers designed, some playback features may not be available.

File format JPEG

Extensions.jpg,.jpeg
Note about double-layer BDs/DVDs
The playback pictures and sound may be momentarily interrupted when the layers switch.
Region code (BD-ROM/DVD VIDEO only)
Your player has a region code printed on the rear of the unit and will only play BD-ROMs/ DVD-ROMs labeled with identical region codes or ALL.

Region code

The player does not play coded files such as DRM. Canada models only ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. *3 The player plays AVCHD format files that are recorded on a digital video camera, etc. The AVCHD format disc will not play if it has not been correctly finalized. *4 The player does not play coded files such as Lossless.
Some files may not play depending on the format, the encoding, or recording condition. Some files edited on a PC may not play. The player can recognize the following files or folders in BDs, DVDs, CDs and USB devices: up to folders in the 5th tree up to 500 files in a single tree Some USB devices may not work with this player. The player can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD) that are FAT-compatible and nonpartitioned, Still Image Capture Device (SICD) class devices and 101 keyboard (front USB jack only). To avoid data corruption or damage to the USB memory or devices, turn the player off when connecting or removing the USB memory or devices. The player may not play high bit rate video files on DATA CDs smoothly. You are recommended to play such files using DATA DVDs.

Theater When you press THEATER, the player automatically switches to the optimum video mode for watching movies. When connected with a Sony AV amplifier (receiver) using the HDMI cable, the speaker output also switches automatically. When connected with a Theater Modecompatible TV using the HDMI cable, the TVs video mode switches to Theater Mode. Press the button again to return to the original setting. Language Follow When you change the language for the onscreen display on your TV, the players language for the on-screen display is also changed after turning the player off and on.
To prepare for the BRAVIA Sync features
Set Control for HDMI to On in the System Settings setup (page 25). For details on settings of your TV or other connected components, refer to the instruction manual supplied with the TV or components.
z When connecting the Sony TV that is compatible with the Control for HDMI Easy Setting function using the HDMI cable, the Control for HDMI setting of the player automatically switches to On if the Control for HDMI setting on the connected TV is set to On. Refer to the instruction manual supplied with the TV. When connecting the Sony TV that is compatible with the BRAVIA Sync features using the HDMI cable, you can control the basic functions of the player with the TVs remote if the Control for HDMI setting on the connected TV is set to On. Refer to the instruction manual supplied with the TV.
About the BRAVIA Sync features (for HDMI connections only)
By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable (supplied with BDP-BX57 only), operation is simplified as below: One-Touch Play With one touch of the following buttons, the connected TV turns on and the input selector on the TV is switched to the player automatically. [/1 HOME: The home menu appears automatically (page 10, 16, 20). N PLAY: Playback starts automatically. System Power-Off When you turn off the TV using -TV- [/1 or the power button on the TVs remote, the player and HDMI-compatible components turn off automatically.
Depending on the connected component, the Control for HDMI function may not work. Refer to the instruction manual supplied with the component.

Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer Sony Hitachi LG/Goldstar Mitsubishi/MGA NEC Panasonic Philips Pioneer Code number 01 (default) 07
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. Wi-Fi CERTIFIED and Wi-Fi Protected Setup are trademarks of the Wi-Fi Alliance. Other system and product names are generally trademarks or registered trademarks of the manufacturers. and marks are not indicated in this document.
RCA Samsung Sharp Toshiba

Language code list

For details, see BD/DVD Viewing Settings (page 24). The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language

not specified
Parental control/area code
For details, see Parental Control Area Code (page 24).
Number, Area (Code) 2044, Argentina (ar) 2047, Australia (au) 2046, Austria (at) 2057, Belgium (be) 2070, Brazil (br) 2090, Chile (cl) 2092, China (cn) 2093, Colombia (co) 2115, Denmark (dk) 2165, Finland (fi) 2174, France (fr) 2109, Germany (de) 2200, Greece (gr) 2219, Hong Kong (hk) 2248, India (in) 2238, Indonesia (id) 2239, Ireland (ie) 2254, Italy (it) 2276, Japan (jp) 2304, Korea (kr) 2333, Luxembourg (lu) 2363, Malaysia (my) 2362, Mexico (mx) 2376, Netherlands (nl) 2390, New Zealand (nz) 2379, Norway (no) 2427, Pakistan (pk) 2424, Philippines (ph) 2428, Poland (pl) 2436, Portugal (pt) 2489, Russia (ru) 2501, Singapore (sg) 2149, Spain (es) 2499, Sweden (se) 2086, Switzerland (ch) 2543, Taiwan (tw) 2528, Thailand (th) 2184, United Kingdom (gb)
Words in quotations appear in the on-screen displays.

Easy Setup 14, 27

Quick Start Mode 25

FAVORITES 9

Region code 33 Remote 9, 11 Resetting 27 Resetting the player 27 Resume 10, 31
AUDIO 9 Audio Settings 23

Gracenote Settings 26

Batteries 11 BD/DVD Viewing Settings 24 BD-LIVE 16 BD-R 32 BD-RE 32 Bitstream 29 Blu-ray Disc 32 BONUSVIEW 16 BRAVIA Internet Video 18 BRAVIA Sync 30, 34
HDMI 22, 23 HOME 10, 20 Home menu 20
Screen Settings 21 Setup 20 Software update 21, 26 SUBTITLE 9 System Power-Off 34 System Settings 25

Internet content 9, 18

Language Follow 34

THEATER 9, 34 TOP MENU 9 Troubleshooting 28 TV Type 21
MAC address 26 Music Settings 25
CD 32 Child Lock 8, 31 Color buttons 9 Connecting AV amplifier (Receiver) 13 Network 15 TV 12 Control for HDMI 25, 30, 34
Network Settings 26 Network Update 21

Update 21 USB 17

One-Touch Play 34 OPTIONS 9 OSD 25
WEP 35 WPA2-PSK (AES) 35 WPA2-PSK (TKIP) 35 WPA-PSK (AES) 35 WPA-PSK (TKIP) 35
Parental Control 24 Parental Control Settings 24 Play information 17 Playable discs 32 POP UP/MENU 9
Deep Color 22 Dimmer 25 DISPLAY 10 Dolby Digital 23 DSD Output Mode 23 DTS 23 DVD 32