CPF-IX001
Sony Wireless PC Audio System
PRELIM NEW Key Features Stream and control music directly from your PC Simple to set up ? load the supplied software, plug in the unit, and it does the rest Wide compatibility; the unit works directly with Connect, i.Tunes, Windows Media Use multiple, independent units throughout your home Compact size delivers maximum performance Subwoofer and digital amplifiers offer room-filling sound Music Surfin ? search through your stored music by artist, disc or genre Playlists ? comes with four user playlists that you can easily access via remote control Line Input allows you to use additional portable audio devices. Supplied Accessories ? includes M-Crew software and a remote control Key Technologies Stream and Control Music from Your PC Sony Wireless PC Audio System allows you to access and play back
music stored on your networked PC from any room of your home.
Multi-Location Use Because each Sony CPF-IX001 Wireless PC Audio System has its own identity on your PCs
network, you can use multiple units throughout your home that can each access and play different music.
Compact Size Unique subwoofer and digital amplifier technology allows a surprisingly small unit to fill your
room with high-quality, high-performance sound.
Simple Setup Load the supplied software, plug in the unit, and it does the rest. Wide Compatibility Sony CPF-IX001 Wireless PC Audio System is seamlessly compatible with virtually any
software you use to store your music, whether its Connect, iTunes or Windows Media. It automatically searches out all music files.

Specifications

Dimensions
Weight: TBD Measurements: TBD UPC Code: 027242689015
2006 Sony Electronics Inc. Sony and like no other are trademarks of Sony. All other trademarks are property of their respective owners. Features and specifications are subject to change without notice. Nonmetric weights and measures are approximate.
Please visit the Dealer Network for current information at www.sony.com/dn
Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 800.222.7669 www.sony.com

Last Updated: 07/14/2006

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC RECOMMEND The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Notice for the customers in Canada
This device complies with RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This equipment complies with IC radiation exposure limits set forth for uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated with at least 20cm and more between the radiator and persons body (excluding extremities: hands, wrists, feet and legs). This class B digital apparatus complies with Canadian ICES-003.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/ The Number below is for the FCC related matters only. Regulatory Information
Declaration of Conformity
Trade Name: Model No.: Responsible Party: Address:
SONY CPF-IX001 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This manual explains the operations of the CPFIX001 itself. This manual mainly explains operations using the remote.
M-crew Server Ver. 2.0 Install manual
This install manual is included on the supplied CD-ROM. It explains how to install the supplied M-crew Server Ver. 2.0 software on your computer.
M-crew Server Ver. 2.0 Help
This help manual can be used only after the Mcrew Server Ver. 2.0 software is installed. It explains the operations of the M-crew Server Ver. 2.0 software which is included on the same CD-ROM.

Overview

Enjoying music stored on your computer
You can listen to music stored on your computer by operating the CPF-IX001. You can use MUSIC SURFIN to easily enjoy tracks registered to M-crew Server (page 15). You can register the current track to your favorite playlist and play tracks using quick and easy remote commander operations. For the computers with internet connections, you can also enjoy listening to web radio.

Internet

If you perform an operation (recording, file importing, using other applications, etc.) that places a load on the server PC while playing back a track registered to the server PC, the sound may skip. In addition, the sound may also skip depending on the network status.
Remote commander with battery
1: Checking supplied items

Main unit

M-crew Server Ver. 2.0 software CD-ROM

Network unit

Subwoofer
* The shape of the plug differs depending on the area.
Network cable for CPF-IX001

LINE IN cable

2: Installing the supplied M-crew Server Ver. 2.0 software
To enjoy listening to the music stored on your computer or listening to the web radio, you must first install the supplied M-crew Server Ver. 2.0 software. The installation screen starts up automatically when you insert the supplied CD-ROM into the computer, so follow the instructions on the screen and install the software.

3: Preparing the remote

Pull out the insulating sheet to allow power to flow from the battery.
The remote already contains a battery.
Replacing the battery in the remote
Slide out and remove the battery case.
For details on the installation, refer to the M-crew Server Ver. 2.0 Install manual contained on the supplied CD-ROM.

Note for NAS-CZ1 users

Insert a new lithium battery CR2025 with the + side facing up.

A lithium battery CR2025

Install M-crew Server Ver. 2.0 without uninstalling M-crew Server Ver. 1.0. The contents information can be used even after installing M-crew Server Ver. 2.0.
Slide the battery case back in.
If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage and corrosion.

Notes on lithium battery

Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.
When the remote can no longer operate the CPFIX001, replace the battery with a new one.
Battery may explode if you mistreated. Do not recharge, disassemble or dispose of in fire.
4: Installing the CPF-IX001
The illustration below is an example of how to position the CPF-IX001. You can place the subwoofer anywhere on the floor.
Do not use the subwoofer for any other device. Do not connect any other AC adaptor to the main unit. The CPF-IX001 is not designed to be used as a portable device. The main unit and the network unit each have a remote sensor. Point the remote at the remote sensor of the main unit or the network unit depending on the operation. Remove the obstacle between the CPF-IX001 and the remote.

To DC IN jack

To the wall outlet
To connect/disconnect the network unit

Connecting

5: Connecting the CPFIX001 to the network
For the network connections and settings, refer to the Quick Setup Guide supplied with the CPF-IX001.
Turn off the power switch ?/a on the subwoofer. Connect the network unit as shown below.

Disconnecting

Press SUSPEND to set the network unit to the suspended mode. Turn off the power switch ?/a on the subwoofer. Disconnect the network unit as shown below.

If the network unit is disconnected without first setting it to the suspended mode, the settings may not be saved.
6: Turning on/off the CPFIX001

Power switch ?/a

7: Connecting a server
You can listen to music stored on the connected media server with the CPF-IX001. You can select your desired media server to be your default server. Doing so prevents you from having to make the selection each time you use network function.
You can also listen to music stored on DLNAcompliant servers other than M-crew Server Ver. 2.0.

To turn on the CPF-IX001

Connect the power cord to a wall outlet. Turn on the power switch ?/a on the subwoofer. The ON indicator on the main unit lights up green. The power is also supplied to the main unit and the network unit. The demonstration appears in the display. When you press SUSPEND, the network unit starts up and the demonstration automatically ends. You can also turn off the demonstration by setting it beforehand.
Start up your desired media server on your computer. Press SUSPEND to start up the network unit.
When there is only one server, this completes the operation. When there are multiple servers, SERVER? appears, then press ENTER.
Press. or > repeatedly to select the desired media server, then press ENTER.
The selected server is set to the default server.
To turn off the CPF-IX001
Press SUSPEND to set the network unit to the suspended mode, and then turn off the power switch ?/a on the subwoofer.
When the power switch ?/a is turned off, the AC power shuts down. Install the CPF-IX001 so that the power switch ?/a can be turned off immediately in the event of trouble. The network unit is not turned off as long as the power switch ?/a on the subwoofer is on.
You can use the following functions only when using the M-crew Server Ver. 2.0 as a media server. MUSIC SURFIN PLAYLIST FAVORITE PLAYLIST WEB RADIO
To turn the demonstration mode on and off
Press DISPLAY while the network unit is set to the suspended mode.
Checking the network status Getting Started

Network illumination

System status
Flashes slowly Lights up Flashes quickly
The CPF-IX001 is communicating with the server. The network function is being used. An error has occurred.
You can check the wireless strength on the display. When the signal is weak or out of range, move the CPF-IX001 and the wireless LAN router closer together, or remove any obstacles between them.
Display Communication status
Flashes: Lights steadily:
Out of range Weak Medium Excellent
You are now finished setting up your CPF-IX001. For further information, see the M-crew Server Ver. 2.0 Help.
Press FUNCTION repeatedly to switch the function to the network function.
The LINE indicator on the main unit turns off.
Registering tracks to the M-crew Server Ver. 2.0
You can register and store audio data from an audio CD or audio data from the hard disk drive of your computer to the M-crew Server Ver. 2.0. You can then listen to the music registered to the M-crew Server Ver. 2.0 through the CPFIX001s speaker. For details on registering audio data, refer to the M-crew Server Ver. 2.0 Help contained on the supplied CD-ROM.
Select the searching criteria using GENRE, ARTIST or ALBUM.
Playback starts when you press the button.

Item name

Listening to music stored on your computer
You can listen to music stored on your computer through the CPF-IX001s speaker. You can easily search for the desired track by using GENRE, ARTIST or ALBUM (MUSIC SURFIN). Make sure you have registered audio data to the media server.

Track name

Elapsed playing time* (Genre mode) (Artist mode) (Album mode)
Lights up when connected with M-crew Server Ver. 2.0. Lights up when playing a copyright protected track.
* Displays the total time when stopped.

Select To

X/x N REPEAT./> PLAY MODE m/M ALL
(Genre mode) listen to items sorted according to the genre information of the tracks. (Artist mode) listen to items sorted according to the artist information of the tracks. (Album mode) listen to items sorted according to the album information of the tracks.

VOL +/

You can also search for tracks using a combination of the Genre, Artist and Album modes.

To listen to all tracks

Press ALL.

To enjoy music using MUSIC SURFIN
You can easily search for the tracks you want to listen by using various searching criteria at the same time to narrow the search. Example 1: To search for a track on an album by your favorite artist on the server

Do this

Play repeatedly (Repeat Play)
Press ARTIST repeatedly until the name of your favorite artist appears. Press ALBUM repeatedly until the album title that contains the track you are searching for appears. Press. or > repeatedly to select the desired track.
Press REPEAT repeatedly during playback until REP or REP1 appears. REP: For all tracks. REP1: For a single track only. To cancel Repeat Play, press REPEAT repeatedly until both REP and REP1 disappear.
Play all tracks in Press PLAY MODE repeatedly all items until CONT appears. Play all tracks only in the selected item in random order Play all tracks only in the selected item Adjust the volume
Press PLAY MODE repeatedly until SHUF appears.
Example 2: To listen to tracks related to the current track
Press PLAY MODE repeatedly until both CONT and SHUF disappear. Press VOL +/ (or VOLUME +/ on the main unit).
Press ARTIST to listen to tracks by the same artist. Only tracks by the artist of the current track are played. Press GENRE or ALBUM. You can also narrow the search by genre and album during playback in the same manner.
The X and m/M buttons may not work for some tracks when using a server other than M-crew Server Ver. 2.0.
Some time may be required before playback starts depending on the number of tracks registered to the server.

To Do this

Play Stop play Pause Select an item
Press N. Press x. Press X. Press again to resume play. Hold down or press + or repeatedly. You can select icon items that have a border. Item refers to the genre in Genre mode, the artist in Artist mode, or the album in Album mode. Press. or > repeatedly.

Select a track

Find a point in a Keep pressing m or M during track playback and release it at the desired point. You can also move forward and backward in a track while playback is paused.
Listening to music in a playlist

PLAYLIST

You can listen to tracks registered to the M-crew Server Ver. 2.0 playlist.
B Listening to music in a playlist you have created3)
You can create your own playlist on M-crew Server Ver. 2.0 and register your favorite tracks. For details, see Creating a New Playlist in the M-crew Server Ver. 2.0 Help.

Listening to web radio using M-crew Server Ver. 2.0
You can listen to web radio programs using M-crew Server Ver. 2.0 and internet access. Preset web radio stations on your computer first.
You cannot use the web radio function with a media server other than the supplied M-crew Server Ver. 2.0. If the web radio sound cannot be heard from the CPFIX001s speaker, check whether the sound can be heard using M-crew Server Ver. 2.0 on the computer. The X, m and M buttons are not available for this function. For details on internet access and settings, refer to the operation manual supplied with your computer or contact your internet provider.

Press WEB RADIO.

appears.
Press + or repeatedly until the desired station appears. Press. or > repeatedly until the desired program appears.

Station name

Program

Elapsed playing time

To stop web radio program

Press x.

To edit web radio stations
You can edit web radio stations only on the M-crew Server Ver. 2.0. For details, refer to Editing Preset Radio Stations of the M-crew Server Ver. 2.0 Help contained on the supplied CD-ROM.
To turn off the network menu
Press MENU repeatedly until you exit the network menu.

Using the network menu

By using the network menu, you can make various settings on network.
Selecting another server 1
Listening to web radio WEB RADIO/Advanced network settings
Select SERVER? in the network menu (page 19), then press ENTER. Press. or > repeatedly to select the desired media server, then press ENTER.
You can select the server from up to 10 servers.
Press MENU. Press. or > repeatedly to select the item that you want to set.

Item See

SERVER? NET SETUP? RESTART? WLAN SETUP?
Selecting another server (page 19). Making network settings manually (page 20). Restarting the network unit (page 20). Refer to the Quick Setup Guide supplied with the CPF-IX001. Registering the CPFIX001 on your computer manually (page 21). Checking network settings (page 21). (Confirm the CPF-IX001 firmware version)

REGISTER?

NET INFO? VERSION?
Making network settings manually
By default the CPF-IX001 acquires an IP address automatically. Use the following procedure to specify an IP address, if necessary. Note that when the CPF-IX001 is used in an environment containing a router with DHCP, you should not need to specify the IP address of the CPF-IX001.

12 Press ENTER. 13 Press SUSPEND to set the network unit

to the suspended mode.

14 Press SUSPEND again to start up the

network unit.

To return to the automatic setting
Select NET SETUP? in the network menu (page 19), then press ENTER. Press. or > repeatedly until NET TYPE? appears, then press ENTER. Press. or > repeatedly until AUTO? appears, then press ENTER. Press SUSPEND to set the network unit to the suspended mode. Press SUSPEND again to start up the network unit.
Select NET SETUP? in the network menu (page 19), then press ENTER. Press. or > repeatedly until NET TYPE? appears, then press ENTER. Press. or > repeatedly until MANUAL? appears, then press ENTER.

IP ADDRESS? appears.

Press ENTER again.
The currently set IP address appears.
Press. or > repeatedly to enter the numeric values of the IP address.
Restarting the network unit
Select RESTART? in the network menu (page 19), then press ENTER.
Press m or M repeatedly to select the digit that you want to set.

SUBNET MASK? appears.

The currently set subnet mask appears.
Press. or > repeatedly to enter the numeric values of the subnet mask.

GATEWAY? appears.

10 Press ENTER again.
The current default gateway appears.
11 Press. or > repeatedly to enter
the numeric values of the default gateway.
Registering the CPF-IX001 on your computer manually
When the CPF-IX001 is connected to your computer after installing the M-crew Server Ver. 2.0 software, the CPF-IX001 is registered automatically on your computer. Register the CPF-IX001 on your computer manually for higher security.
Checking network settings 1 2
Select NET INFO? in the network menu (page 19), then press ENTER. Press. or > repeatedly to select the item that you want to check, then press ENTER.
Select REGISTER? in the network menu (page 19), then press ENTER.
The count down display appears in the display of the CPF-IX001.
Click [Start] [All programs] [M-crew Server] [TOOLS] [EQUIPMENT LIST] in that order to display the screen on the M-crew Server Ver. 2.0.
Each time you press ENTER, the display changes cyclically as follows: NET TYPE? t AUTO* t IP ADDRESS? t IP address* t SUBNET MASK? t Subnet mask* t GATEWAY? t Default Gateway* t MAC ADDRESS? t MAC address t SERVER NAME? t Connected server* t MY NAME? t Name assigned by M-crew Server Ver. 2.0*

Press DISPLAY during playback or while the track is selected in stop mode.
* Connect the end with the ferrite core to the LINE IN jack.
Each time you press the button, the display changes cyclically as follows: Track title t Album information on the track t Artist information on the track t Genre information on the track t Current track number and total number of tracks within the item
Connect an optional portable audio player to the LINE IN jack.
Use the supplied LINE IN cable to connect portable audio players to this jack.
Press FUNCTION repeatedly to switch the function to LINE.
. appears when the total time exceeds 999 minutes 59 seconds. Total number of tracks appears when the track is not selected in stop mode.
The LINE indicator on the main unit turns on. You can then listen to the sound from the portable audio player.

Problems and remedies

Should you encounter a problem with your system, do the following:
The remote does not function. Remove the obstacle. Move the remote closer to the CPF-IX001. Point the remote at the main units sensor or the network units sensor depending on the operation. Replace the CR2025 battery. Locate the CPF-IX001 away from the fluorescent light. The CPF-IX001 can not be turned on even though you have turned on the power. Make sure the power cord is connected to a wall outlet. The sound is distorted. Press VOL (or VOLUME on the main unit) to reduce the volume. Do not connect equipment other than portable audio players.
Make sure the power cord is correctly and firmly connected. Find your problem in the troubleshooting checklist below and take the indicated corrective action.
If the problem persists after doing all of the above, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. When bringing the system in for repairs, be sure to bring in the entire system. This product is a system product, and the entire system is needed to determine the location requiring repair.

Network

The desired server cannot be found. Restart the computer. Check the WIRELESS/WIRED selector on the network unit. Check the network settings on your computer. Start up the server you want to use on your computer. Check the network settings on the CPF-IX001 side. Set the router or hub again correctly. For details, see the instruction manual of the router or hub. When setting a firewall other than that provided with the OS, refer to Troubleshooting in the Mcrew Server Ver. 2.0 Install manual included on the supplied CD-ROM. Reduce the number of servers that can be connected to 10 servers or less (page 19). Follow the procedure below and reconnect to the server. 1. Press MENU. 2. Select SERVER? in the network menu (page 19), then press ENTER. 3. Press./> repeatedly to select the desired media server, then press ENTER. Tracks registered to a server cannot be selected by the CPF-IX001. Track selection, playback and other operations on the CPF-IX001 side may not be possible for servers other than M-crew Server Ver. 2.0.

General

The display of the network unit starts flashing as soon as you turn on the power switch ?/a on the subwoofer even though you have not started up the network unit. Press SUSPEND to start up the network unit. The demonstration disappears. Press DISPLAY. There is no sound. Make sure the subwoofer is on. Check the connections. Press VOL + (VOLUME + on the main unit). If the volume is still low even after the CPF-IX001s volume is turned up to the maximum level, adjust the volume of the connected portable audio player. Make sure the network unit is securely connected. Make sure the network unit is playing music. Check that the function indicator on the main unit is correct. There is severe hum or noise. Move the CPF-IX001 away from the source of noise. Connect the CPF-IX001 to a different wall outlet. Install a noise filter (commercially available) to the power cord.
The sound skips. Sound skipping may occur in the following cases: When music is being recorded onto the server When the computer is running many applications When the network status is crowded When multiple CPF-IX001 systems are performing playback simultaneously When the computer and the wireless LAN router are connected by a wireless connection, change it to a wired connection. When the wireless LAN router and the CPFIX001 are connected by a wireless connection, position the CPF-IX001 as close to the wireless LAN router as possible. Track names are not displayed. Some types of input characters cannot be displayed by the CPF-IX001, even if they can be registered and displayed on the server. Operation commands take time. Depending on the condition of the server, it may take a while until operation proceeds. For example, when there is no response after pressing m/M, keep pressing m/M for a while. Afterwards, operation should begin. Wireless connection does not work well. Check that the wireless settings (SSID, Security mode, Key) match the settings of your wireless LAN router. Check that your wireless LAN router uses the latest firmware version. If it is not the latest version, updating the firmware may improve the communication quality. For details, refer to the operation manual of your wireless LAN router.
The sound is distorted. Set the volume of the connected portable audio player lower.

No Server/No response Restart the computer. Check the WIRELESS/WIRED selector on the network unit. Start up the server. M-crew Server Ver. 2.0 can be started up by the following method: Right-click the M-crew Server task tray icon*, then click Start Music Service in the menu. M-crew Server Ver. 2.0 may not be recognizing the CPF-IX001. Follow the procedure below and check whether M-crew Server Ver. 2.0 is recognizing the CPF-IX001: 1. Click [Start] [All Programs] [M-crew Server] [TOOLS] [EQUIPMENT LIST] in that order. 2. If the CPF-IX001 is not present in the list that appears in step 1, device registration must be performed. For details, see the M-crew Server Ver. 2.0 Help or M-crew Server Ver. 2.0 Install manual within M-crew Server Ver. 2.0. When setting a firewall other than that provided with the OS, refer to Troubleshooting in the Mcrew Server Ver. 2.0 Install manual included on the supplied CD-ROM. Perform the TCP/IP settings and wireless settings correctly for the CPF-IX001 and the computer (page 20). Press MENU Follow the procedure below and reconnect to the server. 1. Press MENU. 2. Select SERVER? in the network menu (page 19), then press ENTER. 3. Press./> repeatedly to select the desired media server, then press ENTER. Server Err Follow the procedure below and reconnect to the server. 1. Press MENU. 2. Select SERVER? in the network menu (page 19), then press ENTER. 3. Press./> repeatedly to select the desired media server, then press ENTER. Server Close Start up the server. M-crew Server Ver. 2.0 can be started up by the following method: Right-click the M-crew Server task tray icon*, then click Start Music Service in the menu. When you want to change the computers network settings, restart the server on your computer. This message disappears after a short time.
WebRadio Err Register a station that can be played back on Mcrew Server Ver. 2.0. Connection may be difficult depending on the internet line status. Wait a bit and then perform the operation again. * M-crew Server task tray icon is.
5Click the button to confirm the set values.
Explanation of wireless setup windows
Configure the CPF-IX001 to communicate on your wireless LAN network. For how to display the wireless setup windows, refer to the Quick Setup Guide supplied with the CPF-IX001.
If any of the set values is incorrect, a dialog box appears. Click [Setup] to show the set values. Correct them if necessary.
Wireless LAN setup window
You can make wireless LAN settings here.

Basic setup window

You can make the basic network settings here.
1Enter the network name (SSID) of the wireless LAN router.

Be sure to enter the one used for your wireless LAN router. SSID is an ID used to identify a wireless network.
1Select an IP address acquisition method from the pull-down menu.
To acquire it from the DHCP server automatically, select [Auto (DHCP)]. To enter it manually, select [Manual (Static IP)].
2From the pull-down menu, select the security mode for your wireless LAN router.
Select one of the following; No security WEP 64bits WEP 128bits WPA (TKIP) WPA (AES) WPA2 (TKIP) WPA2 (AES)
If your wireless LAN router supports DHCP, select [Auto (DHCP)].
2When you select [Auto (DHCP)] in 1, setup is automatically completed.
When you select [Manual (Static IP)], you need to enter appropriate values by yourself.
3Enter a security key when you select [WEP 64bits] or [WEP 128bits] in 2.
Select the security key number and enter the security key for your wireless LAN router. Enter either characters or hexadecimal numbers for the security key. The security keys should be arbitrary characters and numbers. The length of the security keys differs depending on the security mode you select. See the table below.
When you select [Auto (DHCP)], you cannot change the assigned values. When you select [Manual (Static IP)], see the operating instructions for the values to be entered. Enter decimal numbers from 0 to 255 for an IP address.
3The MAC address of your CPF-IX001 is displayed. 4Cancel the settings.
Input method/Number of the characters for security key

Firmware update window

Update the firmware for the CPF-IX001.

WEP 64bits Characters

WEP 128bits
5 (one-byte 13 (one-byte alphanumerics alphanumerics and/or symbols) and/or symbols) 26 (0 to 9, A to F, a to f)
Hexadecimal 10 (0 to 9, A to numbers F, a to f)
4Enter a pre-shared key when you select [WPA(TKIP)], [WPA(AES)], [WPA2(TKIP)], or [WPA2(AES)] in 2.
Enter the pre-shared key for your wireless LAN router. The length of the key should be 8 to 64 characters. If you input 64 characters, enter hexadecimal numbers (0 to 9, A to F, a to f).
Input method/Number of the characters for pre-shared key
1The version of the current firmware is displayed. 2Select the firmware file you want to update.
Click [Browse] to show the dialog for selecting the firmware.

Characters

8 to 63 (one-byte alphanumerics and symbols)
3Click the button to update.
When you click the button, the firmware confirmation window appears. If you select the right firmware, updating starts. The CPF-IX001 restarts automatically when the update is completed. If you select an incorrect firmware, click [Retry] and select the correct one.
Hexadecimal 64 (0 to 9, A to F, a to f) numbers

IP address

WPA2 (Wi-Fi Protected Access 2)
IP addresses usually comprise four groups of up to three digits each, separated by a period (such as 192.168.239.1). All devices on a network must have an IP address.
MAC address (Media Access Control Address)
The new wireless LAN encryption standard advocated by the wireless LAN industry group Wi-Fi Alliance. The WPA2 standard features even stronger security than WPA.
A unique number set to identify a network interface on a network. A unique address is assigned to each interface connected to a network.
SSID (Service Set Identifier)
The name used by a wireless LAN to identify a specific network. The same SSID is set for both the wireless LAN router and the device with wireless LAN functions, and wireless communication is possible between devices with matching SSID.

Subnet mask

Part of an IP address that identifies the subnet, a smaller group on the network.

Cleaning the cabinet

Precautions

On safety

The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the power cord (mains lead), pull it out by the plug. Never pull the cord itself. Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. AC power cord (mains lead) must be changed only at the qualified service shop. Use only the supplied subwoofer (AC power adaptor). Do not use any other AC power adaptor.
Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzine or alcohol.

Polarity of the plug

On placement
Do not place the system in an inclined position. Do not place the system in locations where it is; Extremely hot or cold Dusty or dirty Very humid Subject to vibrations Subject to direct sunlight. Use caution when placing the unit on surfaces that have been specially treated (with wax, oil, polish, etc.) as staining or discoloration of the surface may result.