E:\_NOUHIN_Nagashima\-ALAYA\D710_GB\4259440121DPFD710_GB\010COV.fm Master: Right 010COV.book Page 1 Monday, August 2, 2010 3:01 PM

4-259-440-12 (1)

For your safety

Digital Photo Frame

DPF-D1020/D1010 DPF-D820/D810 DPF-D720/D710/D700
Lets get the photo frame ready

Lets view an image

Try using various functions

Troubleshooting

Additional information

Operating Instructions

Before operating this unit, please read this manual thoroughly and retain it for future reference.

Owners Record

The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DPF-D1020/D1010/D820/D810/D720/D710/D700 Serial No. ________________________

2010 Sony Corporation

DPF-D1020/D1010/D820/D810/D720/D710/D700 4-259-440-12 (1)
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\020REG.fm Master: Left 010COV.book Page 2 Friday, July 23, 2010 4:10 PM

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only.
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.
Do not expose the batteries to excessive heat such as sunshine, fire or the like.
Regulatory Information Declaration of Conformity
Trade Name: Model No.: Responsible Party: Address: SONY DPF-D700 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: Model No.: Responsible Party: Address: SONY DPF-D1020 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\020REG.fm Master: Left 010COV.book Page 4 Friday, July 23, 2010 4:10 PM
For the State of California, USA only
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

For the Customer in Europe
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies may influence the picture of this digital photo frame.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc) again.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\020REG.fm Master: Right 010COV.book Page 5 Friday, July 23, 2010 4:10 PM

Notice for users

Program 2010 Sony Corporation Documentation 2010 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement. Any design data such as sample pictures provided in this software cannot be modified or duplicated except for the purpose of personal use. Any unauthorized duplication of this software is prohibited under copyright law. Please note that unauthorized duplication or modification of portraits or copyrighted work could infringe the rights reserved by rights holders.

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\030C01.fm Master: Right 010COV.book Page 9 Friday, July 23, 2010 4:10 PM

Identifying the parts

x Digital photo frame
LCD screen Remote sensor (except for DPF-D700) Sony logo
BACK button ENTER button Direction (v/V) buttons Direction (B/b) buttons MENU button VIEW MODE button (page 16) 1 (on/standby) button Standby Indicator EXT INTERFACE (USB A) connector USB mini B connector (page 28) Memory card slot (page 15) Access lamp
Holes for hanging unit on the wall
DC IN 12 V jack (DPF-D1020/D1010) / DC IN 5 V jack (DPF-D820/D810/D720/D710/D700) Speaker (DPF-D1020/D820/D720 only) Stand

Continued

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\030C01.fm Master: Left 010COV.book Page 10 Friday, July 23, 2010 4:10 PM
x Remote control (except for DPF-D700)
VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( CLOCK ( ) button SINGLE button ) button INDEX ( ) button

MENU button

Zoom in ( ) button Direction (B/b/v/V) buttons BACK button MARKING ( ) button IMPORT ( SORT button SELECT DEVICE button DELETE ( ROTATE ( ) button ) button ) button ENTER ( ) button

Zoom out ( ) button

About descriptions in this manual The operations described in this manual are based on those with the buttons on the photo frame. When an operation is performed differently, for example, with the remote control and the buttons on the photo frame, it will be explained in a tip.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\040C02.fm Master: Right.L0 010COV.book Page 11 Friday, July 23, 2010 4:10 PM
Remote control (except for DPFD700)
Pull out the protective sheet before use as shown in the figure.

P Notes

If the remote control stops working: Replace the battery (CR2025 lithium battery) with a new one. When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

Protective sheet

Replacing procedures:
CD-ROM (Handbook) page 10

P WARNING

Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame.
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel.
x When the photo frame is placed in the portrait orientation
The display is automatically rotated on the portrait orientation. A video file is not rotated automatically even if you change the orientation of the photo frame (DPF-D1020/D820/D720 only).

x Sony logo

When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up.
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\040C02.fm Master: Left 010COV.book Page 12 Friday, July 23, 2010 4:10 PM

PNotes

Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall. When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface. Remove the stand when you hang the photo frame on the wall. Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then connect the AC adaptor to the wall outlet. We take no responsibility for any accidents or damage caused by defects of attachment, misuse, or natural disasters, etc. Tighten the screws firmly to avoid the photo frame from falling.
To display the photo frame on the wall
Prepare screws (not supplied) suitable for the screw holes on the rear panel.
4 mm (3/16 inch) More than 25 mm (1 inch) 5 mm (7/32 inch) 10 mm (13/32 inch) Holes for hanging the unit on the wall

You cannot play the following type of video file: Video files processed with other video codec than Motion JPEG Video files that exceed maximum number of pixels either in width or height (We cannot guarantee operation with video files not mentioned above.) Fast forward/backward playback and playback pause are not available during Slideshow display.
Playing a video file (DPF-D1020/ D820/D720 only)
The operations described in this section are based on those with the buttons on the supplied remote control.

Select a video file.

1 Press SINGLE. 2 Press B/b to select the desired style and press ENTER. 3 Press B/b to advance/reverse the files to select a video file
you want to play. Using the Index display 1 Press (INDEX). 2 Press B/b/v/V to select a video file you want to play.

Press ENTER.

The selected video file starts playback.

To adjust the volume

Press v/V during playback or playback pause of the video file.

To pause playback

Press ENTER during playback of the video file. To resume playback, press ENTER again.
Fast forward/backward playback
Press B/b during playback of the video file. The file is played forward or backward at high speed while you hold down the b or B button. When you release the button, normal playback starts from that point. Depending on the video file, fast forward/backward playback may not be available with the photo frame.

To stop playback

Press BACK while the video file is being played.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\050C03.fm Master: Right 010COV.book Page 19 Friday, July 23, 2010 4:10 PM
Playing a slideshow with background music (DPF-D1020/ D820/D720 only)

Importing a music file

z Tips
To clear the selection, select the file to be cleared then press ENTER. The check mark () next to the selected file disappears. To delete a music file imported to internal memory, select [Delete BGM] on the [Slideshow Settings] screen in step 2 then press ENTER. Press v/V to select the music file you want to delete from the music file list and press ENTER. A check mark will be displayed next to the selected file. Press MENU then press ENTER when the confirmation screen appears. The file will be deleted from the music file list.
Insert a memory card that contains a music file into the photo frame. Press MENU, select the (Settings) tab with B/b, then press v/V to select [Slideshow BGM Settings]. Press v/V to select [Import BGM] and press ENTER.
Press v/V to select the memory card inserted in step 1. Select a music file you want to import from the music file list with v/V and press ENTER.

A check mark () is displayed next to the selected file.
Playback of the imported music file is enabled only as BGM on a slideshow. Only music files imported to internal memory can be played as BGM. Up to 40 music files can be imported to internal memory of the photo frame. Up to 200 music files in the inserted memory card can be displayed. A music file shows only the file name. A music title and artists name cannot be shown.
Repeat step 5 when you want to select two or more files. Press MENU after you finish selecting the music file(s). Press ENTER when the confirmation screen is displayed.
The selected music file is imported to internal memory of the photo frame.
Selecting a music file to play
Press MENU, select the (Settings) tab with B/b, then press v/V to select [Slideshow BGM Settings]. Press v/V to select [Select BGM] and press ENTER. Select a music file you want to play from the imported music file list with v/V and press ENTER.
Repeat step 3 if you want to select two or more music files.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\050C03.fm Master: Left 010COV.book Page 20 Friday, July 23, 2010 4:10 PM
When you select (Slideshow) on the view mode screen, the music file with a check mark () is played.
Fast forward/backward playback of background music is not available. Also, you cannot change the playback order of background music files. Background music cannot be played during playback of the video. The sound of the video file is played with the video. The background music for the photo displayed after playback of the video will start playback from the beginning of the next music file. If a music file to play is not selected from the imported music file list even if [BGM ON/OFF] is set to [ON], background music will not be played.
Playing background music with a slideshow
Press MENU, select the (Settings) tab with B/b, then press v/V to select [Slideshow BGM Settings]. Press v/V to select [BGM ON/OFF] and press ENTER.
[ON]: Background music is played while a slideshow is run. [OFF]: Background music is not played while a slideshow is run.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\060C04.fm Master: Right.L0 010COV.book Page 21 Friday, July 23, 2010 4:10 PM

Various functions

Importing an image (a memory card b internal memory) Exporting an image (internal memory b a memory card) Deleting an image Marking an image

z Tips x Importing

The number of images to be saved in the internal memory: Resize: approx. 4,000 images (DPF-D1020/D820/D720), approx. 200 images (DPF-D1010/ D710/D700) appox. 150 images (DPF-D810) Original: the number of images may vary, depending on the original image file size.

When a desired image is displayed, press MENU then B/b to select the (Editing) tab. Press v/V to select the desired menu item (Import/ Export/Delete/Marking), and press ENTER. Press v/V to select [. this image], [. multiple images] or [. all images], and press ENTER.
( stands for each command: Import, Export, Delete, or Mark.) [. this image]: Press v/V to select the destination, and press ENTER. [. multiple images]: Press B/b/v/V to select a desired image in the image list, and press ENTER to add. Repeat this operation to select multiple images.

PNotes x Exporting

Any memory card that is not recognized by this photo frame is shown in gray and you cannot select it.
x Importing (DPF-D1020/ D820/D720 only)
Importing video files to internal memory using the buttons on the photo frame is not available. To import a video file, connect a computer to the photo frame and copy a video file on the computer to internal memory on the photo frame. For details, see Connecting to a computer (page 28).
x During exporting/deleting
Avoid doing the following. Doing so may damage this photo frame, memory card, or the data: Turning off the power Removing a memory card Inserting another card

x When deleting

To clear the selection: Select the image and press ENTER. disappears from the image. After you finish selecting the images, press MENU and select the destination. [. all images]: All the images are displayed with. Press MENU and select the destination.
If deletion has started, the deleted image cannot be recovered even if you stop deletion.
Press ENTER when the confirmation screen is displayed.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\060C04.fm Master: Left 010COV.book Page 22 Friday, July 23, 2010 4:10 PM
zTip x Using the remote control
Press SORT when an image is displayed on the screen (except for DPF-D700).
Sorting images (Filtering)
When a desired image is displayed, press MENU then B/b to select the (Editing) tab. Press v/V to select [Sort] and press ENTER. Select a sort style using v/V and press ENTER.

P Note

During Clock and Calendar display, you cannot select the (Editing) tab.

PNotes x During sorting

Avoid doing the following. Doing so may damage this unit, memory card, or the data: Turning off the power Removing an memory card Inserting another card
x Sort is automatically cancelled
When the playback device is changed. When images on a memory card are sorted and the memory card is removed.

[Sort by date]: Filters by the shooting date. [Sort by folder]: Filters by the folder. [Sort by vertical/horizontal]: Filters by the image orientation. [Sort by mark]: Filters by the mark. [Sort by videos/photos] (DPF-D1020/D820/D720 only): Filters according to files that contain videos or photos.
Press B/b/v/V to select the item you want, then press ENTER.

To cancel the sort

Press MENU while the sorted images are displayed, select [Exit sort (show all photos)] and press ENTER.

To change the sort style

Press BACK while the sorted images are displayed then select another sort style.
E:\_NOUHIN_Nagashima\-ALAYA\D710_GB\4259440121DPFD710_GB\060C04.fm Master: Right 010COV.book Page 23 Monday, August 2, 2010 3:01 PM
Specifying the playback device
Press MENU then select the with B/b. (Select device) tab
zTips x What is playback device?
A memory card or the internal memory.
Press v/V to select the device you want to display and press ENTER.
xUsing the remote control (except for DPF-D700)

Press SELECT DEVICE.

During Clock and Calendar display, you cannot select the (Select device) tab.
Adjusting image size and orientation (Zoom in/Zoom out/Rotate)

Enlarging/Reducing

Press MENU in Single view mode, B/b to select the (Editing) tab, v/V to select [Zoom], and press ENTER. Press v/V to select the enlargement factor and press ENTER.
You can enlarge an image from 1.5 times to 5 times (maximum) the original scale. You can move an enlarged image up, down, left and right.
Enlarging an image may reduce the quality depending on the image size. A video file cannot be enlarged or reduced.
Using the remote control (except for DPF-D700) To enlarge an image, press (zoom in) on the remote control in Single view mode. To reduce an enlarged image, press (zoom out). Saving an enlarged or a reduced image (Crop and save) When you move the enlarged image with B/b/v/V and press MENU, the image is saved in the trimmed size. You can select the saving method by pressing v/V. Saving methods: [Save as new image], [Overwrite]* * JPEG file (extension:.jpg) only
E:\_NOUHIN_Nagashima\-ALAYA\D710_GB\4259440121DPFD710_GB\060C04.fm Master: Left 010COV.book Page 24 Monday, August 2, 2010 3:01 PM

Rotating

When displaying the images in the internal memory, the information used to rotate the image is retained even after the power is turned off.

Press MENU in Single view mode, B/b to select the (Editing) tab, v/V to select [Rotate], and press ENTER.
An enlarged image cannot be rotated. You cannot rotate a video file.
Press v/V to select the angle of rotation and press ENTER.
You can select an angle of rotation from among 90 degrees, 180 degrees and 270 degrees clockwise. Using the remote control (except for DPF-D700) You can also rotate an image with (ROTATE) on the remote control. The image rotates 90 degrees counterclockwise every time you press the button.
Changing the settings of the auto power on/off function
z Tips x During operation
The power is turned off automatically at the time you set for [Power-OFF timer].
You can use the timer function to turn the photo frame on or off automatically when the photo frame is turned on.
x During the standby mode
The power is turned on automatically at the time you set for [Power-ON timer].
Press MENU, B/b to select the
Press v/V to select [Auto Power ON/OFF] and press ENTER.
E:\_NOUHIN_Nagashima\-ALAYA\D710_GB\4259440121DPFD710_GB\060C04.fm Master: Right 010COV.book Page 25 Monday, August 2, 2010 3:01 PM
Press v/V to select [Setup method], and press ENTER. Then, press v/V to select [Simple], [Advanced] or [Auto off] and press ENTER.

[Simple]

1 Press v/V to select [Time Setting] , ENTER. 2 Press v/V to select [Power-ON timer] or [Power-OFF timer]

, ENTER.

3 Press v/V to select [Enable] , ENTER. 4 [Auto ON time]/ [Auto OFF time] setting

v/V: Set the time.

AM or PM is displayed when you select [12 hours] on the time display setting. 5 [Auto ON day] / [Auto OFF day] setting v/V: Add a check mark to select the day on which you want to activate the timer. Move the cursor to [OK], and press ENTER. [Advanced]
1 Press v/V to select [Time Setting] , ENTER. 2 Press B/b/v/V to select the day of the week or a time zone*
for which you want to set or cancel the auto power on/off setting, then press ENTER to change the color of the time zone. * You can set a time zone by one hour units. Blue time zone: Power ON status Gray time zone: Power OFF status 3 Press B/b/v/V to select [OK].
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\060C04.fm Master: Left 010COV.book Page 26 Friday, July 23, 2010 4:10 PM

Are there more than 4,999 images in the internal memory or in the memory card?
Did you rename the file with c If you named or renamed the file on your a computer or other device? computer and the file name includes characters other than alphanumeric characters, the image may not be able to be displayed on the photo frame. Is there a folder with more than 8 levels in its hierarchy on the memory card? A video file is not played. c The photo frame cannot display images saved in a folder that is more than 8 levels deep.
Does the mark displayed c If the mark shown on the left is displayed, below appear in the index or the video file may not supported by the single view display? photo frame. For video files that cannot be played, see Playing a video file (DPFD1020/D820/D720 only) (page 18). c Fast forward/backward playback of some video files may not be available with the photo frame. c If you do not make a folder, you can only save up to 512 images. In addition, the number of images may be reduced depending on the file name length or character type. When you save images in the internal memory from a computer, be sure to make a folder in the internal memory and save the images in this folder.
Fast forward/ backward playback is not available. Cannot save an image.
Did you save images from a computer to the internal memory without making a folder in the internal memory?
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\070C05.fm Master: Right 010COV.book Page 31 Friday, July 23, 2010 4:10 PM
Symptom Cannot delete an image.
Check item Is the memory card writeprotected? Or is the writeprotect switch locked? Is this image protected?
Cause/Solutions c Use the device you are using to cancel write-protection and try deleting again. c Slide the write-protect switch to the enable position. c Check the image information from the single view mode. (page 17) c An image with a mark is set to Read Only. You cannot delete it on the photo frame. c Turn off the power then turn it on. (page 13) c Replace the battery. (Digital Photo Frame Handbook, page 9) c Insert a battery in the proper orientation. (Digital Photo Frame Handbook, page 9) c Point the top end of the remote control towards the remote sensor on the photo frame. c Remove any obstruction between the remote control and the remote sensor.
Nothing happens even if you operate the photo frame.
Nothing happens Is the battery inserted in the even if you operate remote control properly? the remote control.
Is there a protective sheet inserted?
c Remove the protective sheet. (page 11)

* The definition of the normal mode is a status which allows the performance of a slideshow using images stored in the internal memory with the default settings without inserting a memory card or connecting an external device.
Operating temperature 5 C to 35 C (41 F to 95 F) Dimensions (width/height/depth) DPF-D1020 [With the stand spread out] Approx. 293 mm 195 mm 118.8 mm (11 1/5/5/8) inches [When the photo frame is hanging on the wall] Approx. 293 mm 195 mm 28.8 mm (11 1/5/1/8) inches
DPF-D1010 [With the stand spread out] Approx. 293 mm 195 mm 116.9 mm (11 1/5/5/8) inches [When the photo frame is hanging on the wall] Approx. 293 mm 195mm 26.9 mm (11 1/5/1/8) inches DPF-D820 [With the stand spread out] Approx. 233 mm 176 mm 111.6 mm (9 1/7/3/8) inches [When the photo frame is hanging on the wall] Approx. 233 mm 176 mm 28.8 mm (9 1/7/1/8) inches DPF-D810 [With the stand spread out] Approx. 233 mm 176 mm 109.9 mm (9 1/7/3/8) inches [When the photo frame is hanging on the wall] Approx. 233 mm 176 mm 27.1 mm (9 1/7/1/8) inches DPF-D720 [With the stand spread out] Approx. 202 mm 141 mm 107.8 mm (1/1/4) inches [When the photo frame is hanging on the wall] Approx. 202 mm 141 mm 28.2 mm (1/1/8) inches DPF-D710 [With the stand spread out] Approx. 202 mm 141 mm 106 mm (1/1/8) inches [When the photo frame is hanging on the wall] Approx. 202 mm 141 mm 26.5 mm (1/2 1) inches DPF-D700 [With the stand spread out] Approx. 202 mm 141 mm 106 mm (1/1/8) inches
E:\_NOUHIN_Nagashima\-ALAYA\D710_GB\4259440121DPFD710_GB\080ADD.fm Master: Right 010COV.book Page 35 Monday, August 2, 2010 3:01 PM
[When the photo frame is hanging on the wall] Approx. 202 mm 141 mm 26.5 mm (1/2 1) inches Mass DPF-D1020: approx. 743 g (1 lb 10 1/4 oz) DPF-D1010: approx. 630 g (1 lb 6 1/8 oz) DPF-D820: approx. 599 g (1 lb 5 1/8 oz) DPF-D810: approx. 525 g (1 lb 2 1/2 oz) DPF-D720: approx. 405 g (14 1/4 oz) DPF-D710: approx. 346 g (12 1/4 oz) DPF-D700: approx. 346 g (12 1/4 oz) (Excluding the AC adaptor) Included accessories See Checking included items on page 8.

and/or application files. The capacity that a user can use is approximately 1.9 GB (DPF-D1020/D820/ D720) / 80 MB (DPF-D1010/D710/D700) / 60 MB (DPF-D810). *5 : Approximate number is shown when the images taken by 2,000,000 pixels equivalent camera are saved. The value may vary depending on the shooting condition. *6 : Some files that satisfy the requirements mentioned may not be played properly depending on the performance or status of a memory card you are using.
Customer support home page
The latest support information is available at the following home page address: http://www.sony.net/

x AC adaptor

Power requirements - 100 V to 240 V, 50 Hz/60 Hz, 0.4 A Rated output voltage DPF-D1020/D1010: 12 V, 1.5 A DPF-D820/D810/D720/D710/D700: 5 V, 2 A Dimensions (depth/width/height) Approx. 64 mm 50 mm 30 mm (2 5/1 3/16) inches (excluding the protruding parts) Mass Approx. 110 g (3 7/8 oz) See the label of AC adaptor for more details. Design and specifications are subject to change without notice.
On trademarks and copyrights
, Cyber-shot, , Memory , Memory Stick Duo, , MagicGate Memory Stick, Memory Stick PRO, , Memory Stick PRO Duo, , Memory Stick PRO-HG Duo, , Memory Stick Micro, , , Memory Stick-ROM, , MagicGate, and are trademarks or registered trademarks of Sony Corporation. Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the United States and/or other countries. The SD logo is a trademark. Stick, The SDHC logo is a trademark. Contains iTypeTM and fonts from Monotype Imaging Inc. iTypeTM is a trademark of Monotype Imaging Inc. This software is based in part on the work of the Independent JPEG Group.
: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format : RAW files of a Sony series digital single-lens reflex camera are displayed as thumbnail preview. *3: 17 bits or more are required both vertically and horizontally. An image with an aspect ratio of 20:1 or more may not be displayed properly. Even if the aspect ratio is less than 20:1, display problem may occur in thumbnails, slideshow or other occasions. *4 : When measuring media capacity, 1 MB equals 1,000,000 bytes and 1 GB equals 1,000,000,000 bytes, a portion of which is used for data management

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\010COV.fm Master: Right 010COV.book Page 1 Wednesday, August 25, 2010 12:06 PM

4-259-434-11 (1)

For your safety

Digital Photo Frame

DPF-XR100/VR100
Lets get the photo frame ready

Lets view an image

Try using various functions

Troubleshooting

Additional information

Operating Instructions

Before operating this unit, please read this manual thoroughly and retain it for future reference.

Owners Record

The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DPF-XR100/VR100 Serial No. ________________________

2010 Sony Corporation

DPF-XR100/VR100 4-259-434-11 (1)
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\020REG.fm Master: Left 010COV.book Page 2 Wednesday, August 25, 2010 12:06 PM

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.
Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only.
Regulatory Information Declaration of Conformity
Trade Name: Model No.: Responsible Party: Address: SONY DPF-XR100 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
Trade Name: Model No.: Responsible Party: Address: SONY DPF-VR100 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.
Do not expose the batteries to excessive heat such as sunshine, fire or the like.

CAUTION

Replace the battery with the specified type only. Otherwise, fire or injury may result. Dispose of used batteries according to the instructions.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

For the State of California, USA only
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate.
For the Customer in Europe
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies may influence the picture of this digital photo frame.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc) again.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\020REG.fm Master: Left 010COV.book Page 4 Wednesday, August 25, 2010 12:06 PM

Notice for users

Program 2010 Sony Corporation Documentation 2010 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement. Any design data such as sample pictures provided in this software cannot be modified or duplicated except for the purpose of personal use. Any unauthorized duplication of this software is prohibited under copyright law. Please note that unauthorized duplication or modification of portraits or copyrighted work could infringe the rights reserved by rights holders.

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Left.L0 010COV.book Page 14 Wednesday, August 25, 2010 12:06 PM
When using a memory card of the following types, make sure to insert it in an appropriate adaptor. If you insert it without an adaptor, you may be unable to remove it. As shown in the right-most illustration below, make sure to insert the following types of memory cards with inserted in the appropriate adaptor.

Inserting a memory card

Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame).
CompactFlash card* (Slot A)
xD-Picture Card (Slot B) SD memory card (Slot B) Memory Stick (Slot B) Access lamp

1miniSD/miniSDHC

miniSD/ miniSDHC adaptor

2microSD/microSDHC

microSD/ microSDHC adaptor

3Memory Stick Micro

M2 adaptor (standard size)
Memory Stick Duo (Slot C)

3 M2 adaptor (Duo size)

When you insert a memory card
The images on the memory card are automatically displayed.
* A CompactFlash card can be used with the DPF-XR100 only.
If you switch off the power while they are being displayed
If you switch the power back on, the same images continue to be displayed.
S-Frame fails to auto rotate if: An image file has been shot with a DSC which doesnt support Exif rotate tag recording. An image file is retouched and saved with retouching software which breaks the Exif rotate tag.
If the access lamp does not flash
Reinsert the memory card after checking the label side of the memory card.

About the B and C slots

If you insert memory cards both into the B and C slots simultaneously, the photo frame will not work properly.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Right 010COV.book Page 15 Wednesday, August 25, 2010 12:06 PM

Changing the display

Press the button corresponding to view mode you want to select.

VIEW MODE buttons

The display changes to the selected view mode.
Press B/b to select a desired style, and press
The view mode screen is displayed. Displays Styles
If you do not operate the photo frame for a certain period of time, the style indicated by the cursor is automatically selected.

Slideshow

Single view, Multi image view, Clock view/ World Clock, Calendar view, Time Machine, Scrap-book/Creative, Random view Clock1 to Clock9 Calendar1 to Calendar2 World Clock1 to World Clock3 Lunar Calendar, Arabic Calendar, Farsi Calendar Entire image, Fit to screen, Entire image (with Exif), Fit to screen (with Exif)
z Tips x Style descriptions:
CD-ROM (Handbook) Changing the display

Clock and calendar

x About the calendars:
Lunar Calendar, Arabic Calendar, and Farsi Calendar are displayed only when the relevant language is selected with the Language Setting.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Left.2col 010COV.book Page 16 Wednesday, August 25, 2010 12:06 PM
About the information displayed on the screen

4 Image details

The following information is displayed.

1 Setting information

Meaning Protect indication Associated file indication (Displayed when there is an associated file such as a video file or a miniature e-mail image file.) Displays when you have registered a mark. Video icon Audio memo icon Panoramic image icon
x When the photo is displayed File format (JPEG(4:4:4), JPEG(4:2:2), JPEG(4:2:0), BMP, TIFF, RAW) Number of pixels (width height) Manufacturer name of image input device Model name of image input device Shutter speed (e.g.: 1/8) Aperture value (e.g.: F2.8) Exposure value (e.g.: +0.0EV) Rotation information x When the video file is played File format (AVI, MOV, MP4, MPEG-2 PS, MPEG-2 TS) Video file size Playback duration Number of pixels (width height) Vedeo codec/bit rate Audio codec/bit rate

2 Shooting date/time

This is not displayed for video files. 3Image number (folder-file number)
This is displayed if the image is DCF compliant. If the image does not comply with DCF, 10 characters from the beginning of the file are displayed.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Right 010COV.book Page 17 Wednesday, August 25, 2010 12:06 PM

Playing a video file

Select a video file.
1 Press SINGLE. 2 Press B/b to select the desired style and press. 3 Press B/b to advance/reverse the files to select a video file
You cannot play the following type of video file: Video files that exceed maximum number of pixels either in width or height (We cannot guarantee operation with video files not mentioned above.) Fast forward/backward playback and playback pause are not available during slideshow display. Video images divided into different files upon shooting cannot be played continuously one after another.
you want to play. Using the Index display 1 Press (INDEX). 2 Press B/b/v/V to select a video file you want to play.

The selected video file starts playback.

To adjust the volume

The volume adjustment screen appears on the right of the screen if you press v/V. To increase the volume, press V. To decrease the volume, press v.
You can adjust the volume on the initial display or single image display.

To pause playback

Press during playback of the video file. To resume playback, press again.
Fast forward/backward playback
Press B/b during playback of the video file. When you press during fast forward/backward playback, normal playback resumes at that point. Depending on the video file, fast forward/backward playback may not be available with the photo frame.

To stop playback

Press BACK while the video file is being played.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Left 010COV.book Page 18 Wednesday, August 25, 2010 12:06 PM

z Tips

To clear the selection, select the file to be cleared then press. The check mark () next to the selected file disappears. To delete a music file imported to internal memory, select [Delete BGM] on the [Slideshow Settings] screen in step 2 then press. Press v/V to select the music file you want to delete from the music file list and press. A check mark will be displayed next to the selected file. Press MENU then press when the confirmation screen appears. The file will be deleted from the music file list.
Playing a slideshow with background music

Importing a music file

Insert a memory card that contains a music file into the photo frame. Press MENU, then select the [Slideshow Settings] tab with B/b. Press v/V to select [Import BGM] and press.
Playback of the imported music file is enabled only as BGM on a slideshow. Only music files imported to internal memory can be played as BGM. Up to 40 music files can be imported to internal memory of the photo frame.
Press v/V to select the memory card inserted in step 1. Select a music file you want to import from the music file list with v/V and press.
A check mark () is displayed next to the selected file.
Repeat step 5 when you want to select two or more files. Press MENU after you finish selecting the music file(s). Press when the confirmation screen is displayed.
The selected music file is imported to internal memory of the photo frame.

The power is turned off automatically at the time you set for [Power-OFF timer].
Press MENU, B/b to select the
x During the standby mode
The power is turned on automatically at the time you set for [Power-ON timer].
Press v/V to select [Auto Power ON/OFF] and press. Press v/V to select [Setup method], and press. Then, press v/V to select [Simple], [Advanced] or [Auto off] and press.

[Simple]

1 Press v to select [Time Setting] ,. 2 Press v/V to select [Power-ON timer] or [Power-OFF timer]
3 Press v/V to select [Enable] ,. 4 [Auto ON time]/ [Auto OFF time] setting

v/V: Set the time.

AM or PM is displayed when you select [12 hours] on the time display setting. 5 [Auto ON day] / [Auto OFF day] setting v/V: Add a check mark to select the day on which you want to activate the timer. Move the cursor to [OK], and press.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left 010COV.book Page 24 Wednesday, August 25, 2010 12:06 PM

[Advanced]

1 Press v to select [Time Setting] ,. 2 Press B/b/v/V to select the day of the week or a time zone*
for which you want to set or cancel the auto power on/off setting, then press to change the color of the time zone. * You can set a time zone by one hour units. Blue time zone: Power ON status Gray time zone: Power OFF status 3 Press B/b/v/V to select [OK]. [Auto off]
1Press v to select [Time Setting] ,
2Press v/V to select [2 hours] or [4 hours] ,

Using the alarm function

You can use the photo frame as an alarm clock. An alarm will sound and an alarm screen will be displayed to notify you when the specified alarm time on the specified day of the week arrives.

Set the alarm timer.

1 Press v/V to select [ON/OFF] , 2 Press v/V to select [ON] ,.

Set the alarm time.

1 Press v/V to select [Time] ,
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Right 010COV.book Page 25 Wednesday, August 25, 2010 12:06 PM

Initializing the system

Press B/b to select [Yes] in the System initialization screen and press.
It may take about 1 minute for the system to start for the first time after initialization. When system initialization has been executed, menu settings and mark information will be deleted, although the image and music data stored in internal memory of the photo frame will not be deleted.
When a completion message appears, press 1 (on/ standby) on the photo frame to turn it off.
Press the reset switch on the rear panel of the photo frame using a small, thin object, etc. Press 1 (on/standby) on the photo frame to turn it on.
The system of the photo frame starts.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left 010COV.book Page 28 Wednesday, August 25, 2010 12:06 PM
Connecting to a high-definition TV (DPF-XR100 only)
Depending on the original images, high-definition display may not be possible. Use an HDMI cable that is less than 3 meters long. Use an HDMI cable with the HDMI logo. Connection to a TV input except for an HDMI input using a conversion/adaptor cable or connector is not guaranteed. Operation is not guaranteed with all TVs. If you connect a TV, the LCD screen of the photo frame turns off. If the photo frame is connected to a TV with an HDMI cable, audio, operating sound and alarm will be output from the TV, not from the photo frame. Adjust the volume on the TV. If [Control for HDMI] is set to off in the TV settings, the input is not changed automatically. If you are using a TV that does not support HDMI control or the input is not switched automatically, change the TVs input manually. The method used for changing the input differs depending on the TV. Refer to the operating instructions supplied with the TV.
The photo frame is capable of HDMI output. If you connect the photo frame to a TV with an HDMI input, you can display images in higher definition on the TV.

About PhotoTV HD

The photo frame supports PhotoTV HD. PhotoTV HD is a function for expressing subtle textures and color tones in high definition, giving the appearance of real photos. You can combine Sony devices that support PhotoTV HD together to enjoy photos at beautiful full HD quality.
Connect the AC power adaptor to the photo frame and connect the AC power adaptor to an AC outlet Connect the HDMI OUT connector (A type connector) of the photo frame and the HDMI IN connector of the TV.

Connecting to a computer

Connect the AC adaptor to the photo frame, and to an AC outlet. Connect the computer and photo frame with a commercially available USB cable. Turn the photo frame on. Operate the computer to exchange images with the internal memory of the photo frame.
USB mini B connector Computer

To USB connector

System Requirements x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 / Windows XP SP3 Port: USB port

x Macintosh

Recommended OS: Mac OS X (v10.4 or later) Port: USB port
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\070C05.fm Master: Right 010COV.book Page 31 Wednesday, August 25, 2010 12:06 PM
If an error message appears
Error message Cannot delete a protected file. Meaning/Solutions To delete a protected file, cancel the protection on your digital camera or computer.
Memory card is protected. Remove The memory card is write-protected. Slide the writeprotection then try again. protect switch to the enable position. (Digital Photo Frame Handbook, About memory cards) Error reading the Memory Stick. / An error has occurred. If this error message is displayed Error reading the CompactFlash frequently, check the status of the memory card or external card. / Error reading the SD device with a device other than the photo frame. Memory Card. / Error reading the For an external device: xD-Picture Card. / Error reading The external device may be write-protected. Cancel the the internal memory./ Error reading write-protection setting for the device you are using. The the External Device. internal memory of a digital camera may be writeWrite error on the Memory Stick. / protected. Write error on the CompactFlash For an internal memory: card. / Write error on the SD Initialize the internal memory. Memory Card. / Write error on the PNote xD-Picture Card. / Write error on When you initialize the internal memory, please note that all the the internal memory./ Write error image files imported to the internal memory are deleted. on the External Device. Memory card format not supported. For a memory card, use your digital camera or other device to format the memory card. Use the photo frame to initialize the internal memory.
When you initialize the memory card, all the files on the memory card will be deleted.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\070C05.fm Master: Left 010COV.book Page 32 Wednesday, August 25, 2010 12:06 PM

Check item Is the memory card writeprotected? Or is the writeprotect switch locked? Is this image protected?
Cause/Solutions c Use the device you are using to cancel write-protection and try deleting again. c Slide the write-protect switch to the enable position. c Check the image information from the single view mode (page 16). c An image with a mark is set to Read Only. You cannot delete it on the photo frame. c Turn off the power then turn it on (page 12). c Push the reset switch on the back of the photo frame using a long, thin object such as a pin, etc. (page 9). c Use maintenance mode to initialize the system of the photo frame (page 26). c Replace the battery. (Digital Photo Frame Handbook, Preparing the remote control c Insert a battery in the proper orientation. (Digital Photo Frame Handbook, Preparing the remote control)
Nothing happens even if you operate the photo frame.
The photo frame does not start.
Nothing happens Is the battery inserted in the even if you operate remote control properly? the remote control.
c Point the top end of the remote control towards the remote sensor on the photo frame. c Remove any obstruction between the remote control and the remote sensor. c Remove the protective sheet (page 10).
Is there a protective sheet inserted?
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\080ADD.fm Master: Left.L0 010COV.book Page 34 Wednesday, August 25, 2010 12:06 PM

Precautions

Installation
Avoid placing the photo frame in a location subject to: vibration humidity excessive dust direct sunlight extremely high or low temperatures Do not use electrical equipment near the photo frame. The photo frame will not work properly in electromagnetic fields. Do not place heavy objects on the photo frame.

On transport

When you transport the photo frame, remove the memory card, AC adaptor, and connected cables from the photo frame and put the photo frame and its peripherals in the original box with the protective packaging. If you no longer have the original box and packing parts, use similar packing material so that the photo frame will not be damaged while being transported.

Cleaning

Clean the photo frame with a soft dry cloth. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

On the AC adaptor

The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Be sure to use the AC adaptor supplied with the photo frame. Do not use other AC adaptors, as this may cause a malfunction. Do not use the supplied AC adaptor for other devices. Do not use an electrical transformer (travel converter), as this may cause overheating or a malfunction. In case the cord of the AC adaptor is damaged, do not use it any longer, as this may be dangerous.

Restrictions on duplication
TV programs, films, video tapes, portraits of other people, or other materials may be copyrighted. Unauthorized use of such materials may infringe the provisions of the copyright law.
Disposing of the photo frame
Even if you perform [Format internal memory], the data in the internal memory may not be erased completely. When you dispose of the photo frame, we recommend that you physically destroy the photo frame.

On moisture condensation

If the photo frame is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the photo frame will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC adaptor of the photo frame and do not use the photo frame for at least one hour.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\080ADD.fm Master: Right 010COV.book Page 35 Wednesday, August 25, 2010 12:06 PM

Specifications

x Photo frame
LCD screen LCD panel: 26 cm/10.2 inches, TFT active matrix Total number of dots: 1,843,200 dots (1,(RGB) 600) dots Effective display area Display aspect ratio: 16:10 LCD screen area: 22.4 cm/9.6 inches Total number of dots: 1,692,900 dots ((RGB) 594) dots LCD backlight life 20,000 hours (before brightness of the backlight is reduced to half) Input/Output connectors HDMI OUT connector (DPF-XR100 only) (Type A, 1080i (60 Hz) / 1080i (50 Hz) / 576p (50 Hz) /480p (60 Hz) compatible, BRAVIA Sync compatible) USB connector (Type mini B, Hi-Speed USB) USB connector (Type A, Hi-Speed USB) Memory Stick PRO (Standard/Duo)/SD memory card/MMC/xD-Picture Card slot CompactFlash card slot (DPF-XR100 only) Compatible file formats*1 Photo Format: JPEG: DCF 2.0, Exif 2.3 and MPF baseline compatible, JFIF*2 TIFF: Exif 2.3 compatible BMP: 1, 4, 8, 16, 24, 32 bit Windows format RAW (preview only*3): SRF, SR2, ARW (2.2 or lower version) Maximum picture elements 16,384 16,384 dots Video*4*5 Compression format (video codec):
MPEG-4 AVC/H.264: Extension: mp4, mts Profile: Baseline profile, Main profile, High profile Level: lower than 4 Maximum resolution: Audio format: Dolby Digital, AAC MPEG-4 Visual: Extension: mp4 Profile: Simple Profile, Advanced Simple Profile Level: lower than 6 (Simple Profile), less than 5 (Advanced Simple Profile) Maximum resolution: (Simple Profile), (Advanced Simple Profile) Audio format: AAC-LC MPEG-1 Video: Extension: mpg Maximum resolution: Audio format: MPEG-1 Audio Layer 2 Motion JPEG: Extension: mov, avi Maximum resolution: Audio format: Linear PCM, -Law Maximum bit rate: 24 Mbps Maximum frame rate: 30p/60i Maximum file size: 2 GB Maximum payback time: 2 hours Background music*4 Compression format (audio codec): MP3: Extension: mp3 Bit rate: 32 kbps to 320 kbps, Supports variable bit rate (VBR) Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz AAC: Extension: m4a Bit rate: 32 kbps to 320 kbps, Supports variable bit rate (VBR) Sampling frequency: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz

Customer support home page
The latest support information is available at the following home page address: http://www.sony.net/
All other companies and product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual. Notes on the License
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii)DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
On trademarks and copyrights
, BRAVIA, PhotoTV HD Cyber-shot, , , Memory Stick, , Memory Stick Duo, , MagicGate Memory Stick, Memory Stick PRO, , Memory Stick PRO Duo, , Memory Stick PRO-HG Duo, , Memory Stick Micro, , , Memory Stick-ROM, , MagicGate, and are trademarks or registered trademarks of Sony Corporation. HDMI, HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the United States and/or other countries. CompactFlash is a trademark of SanDisk Corporation in the U.S.A. or xD-Picture CardTM is a trademark of FUJIFILM Corporation. SD Logo, SDHC Logo, SDXC Logo are trademarks of SD-3C, LLC.
Contains iTypeTM and fonts from Monotype Imaging Inc. iTypeTM is a trademark of Monotype Imaging Inc. Dolby is a trademark of Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\080ADD.fm Master: Left 010COV.book Page 38 Wednesday, August 25, 2010 12:06 PM

Notice on license

The photo frame contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. The contents of the license are given on the supplied CD-ROM. Please read NOTICE.html in the License folder on the CD-ROM.
Notice on GNU GPL/LGPL applied software
This product contains software that is subject to the following GNU General Public License (hereinafter referred to as GPL) or GNU Lesser General Public License (hereinafter referred to as LGPL). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or LGPL supplied. The source code for the above-listed software is available on the Web. To download, please access the following URL then select the model name DPFXR100/VR100. URL: http://www.sony.net/Products/Linux/ Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\080ADD.fm Master: Right 010COV.book Page 39 Wednesday, August 25, 2010 12:06 PM
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\090BCO.fm Master: Left 010COV.book Page 40 Wednesday, August 25, 2010 12:06 PM
Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink.

Sony Corporation

Printed in China