Sony HDR-XR350e Digital Camcorder & Video Recorder, size: 2.6 MB
Sony HDR-XR350e Annexe 2
Sony HDR-XR350e Annexe 1
Sony HDR-XR350e Annexe 3
Sony - HD 1080i - MPEG-2 - Memory Stick - Hard Drive - Standard SD - SDHC - 12 x optical zoom - 13.8 ounce
Equipped with an "Exmor R" CMOS sensor for superior low-light performance, this handy camera also has optical SteadyShot image stabilization with active mode and 3-way shake canceling, which enables you to capture remarkably smooth video.
[ Report abuse or wrong photo | Share your Sony HDR-XR350E photo ]
Sony HDR XR 350 e
User reviews and opinions
|crofty.boy||4:28pm on Tuesday, May 18th, 2010|
|is very easy to use, and is great use it. Easy to Use","Good Image Stabilization","Good in Low Light","Great Picture Quality","Great Zoom".|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Declaration of Conformity Trade Name: SONY Model No.: HDR-CX300E Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity Trade Name: SONY Model No.: HDR-XR350E Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For customers in the U.S.A.
If you have any questions about this product, you may call: Sony Customer Information Center 1-800222-SONY (7669). The number below is for the FCC related matters only.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
The numbers in ( ) are the supplied quantity. AC Adaptor (1) Power cord (Mains lead) (1) Component A/V cable (1) A/V connecting cable (1) USB cable (1) Wireless Remote Commander (1)
A button-type lithium battery is already installed. Remove the insulation sheet before using the Wireless Remote Commander.
Rechargeable battery pack NP-FV50 (1) CD-ROM Handycam Application Software (1) (p.34)
(software, including PMB Help) Handbook (PDF)
Operating Guide (This manual) (1)
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
See page 18 for the memory card you can use with this camcorder.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Using the camcorder
Do not hold the camcorder by the following parts, and also do not hold the camcorder by the jack covers.
Exposing the LCD screen or the lens to direct sunlight for long periods of time may cause malfunctions. Do not aim at the sun. Doing so might cause your camcorder to malfunction. Take images of the sun only in low light conditions, such as at dusk.
About language setting
The on-screen displays in each local language are used for illustrating the operating procedures. Change the screen language before using the camcorder if necessary (p.16).
When the temperature of the camcorder or battery pack becomes extremely high or extremely low, you may not be able to record or play back on the camcorder, due to the protection features of the camcorder being activated in such situations. In this case, an indicator appears on the LCD screen.
Discs recorded with HD image quality (high definition)
This camcorder captures high definition footage in the AVCHD format. DVD media containing AVCHD footage should not be used with DVD based players or recorders, as the DVD player/ recorder may fail to eject the media and may erase its contents without warning. DVD media containing AVCHD footage may be played on a compatible Blu-ray Disc player/recorder or other compatible device.
When the camcoder is connected to a computer or accessories
Do not try to format the recording media of the camcorder using a computer. If you do so, your camcorder may not operate correctly. When connecting the camcorder to another device with communication cables, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of the camcorder.
Save all your recorded image data
To prevent your image data from being lost, save all your recorded images on external media periodically. It is recommended that you save the image data on a disc such as DVD-R, etc. using your computer. Also, you can save your image data using a VCR, or a DVD/HDD recorder (p.46). You cannot make a AVCHD disc from the image data recorded with
If you cannot record/play back images, perform [MEDIA FORMAT]
If you repeat recording/deleting images for a long time, fragmentation of data occurs on the recording media. Images cannot be saved or recorded. In such a case, save your images on some type of external media first, and then perform [MEDIA FORMAT] by touching (MENU) [Show others] [MEDIA FORMAT] (under [MANAGE [YES] [YES] .
[Show others] [
REC MODE] (under
Internal memory + memory card
Input/ output Output only
Note on using the camcorder at high altitudes (HDR-XR350E/XR350VE)
Do not turn on the camcorder in a low-pressure area, where the altitude is more than 5,000 meters (16,000 feet). Doing so may damage the internal hard disk drive of your camcorder.
64 GB Internal hard disk + memory card 160 GB
The model with * is equipped with GPS.
Getting started (p.12)
Prepare the power source and memory card.
Recording movies and photos (p.20)
Recording movies p.21 Shooting photos p.23
Changing the recording mode Expected recording time(MEDIA INFO)
Playing movies and photos
Playback on the camcorder p.25 Playing images on a TV p.28
Saving movies and photos with a computer p.33 Saving movies and photos in external media p.44 Saving images with a DVD writer/recorder p.46
Deleting movies and photos (p.31)
If you delete the image data that has been saved on your computer or a disc, you can record new images on the free media space again.
Read this first. 2. Operation flow.. 9
Step 1: Charging the battery pack. Charging the battery pack abroad. Step 2: Turning the power on, and setting the date and time. Changing the language setting. Step 3: Preparing the recording media. To check the recording media settings. Dubbing or copying movies and photos from the internal recording media to memory card. 28
Recording. Acquiring location information using the GPS (HDR-CX350VE/XR350VE). Playback on the camcorder. Playing images on a TV.
Deleting movies and photos. 31
Saving movies and photos with a computer
Preparing a computer (Windows). When using a Macintosh. Starting PMB (Picture Motion Browser). Selecting the method for creating a disc (computer). Creating a disc with one touch (One Touch Disc Burn). Importing movies and photos to a computer. Creating an AVCHD disc. Playing an AVCHD disc on a computer. Creating a Blu-ray disc. Creating a standard definition image quality (STD) disc that can be played on ordinary DVD players.. Copying a disc.. Editing movies. Capturing photos from a movie. 43
Saving images with an external device
Saving images in external media (DIRECT COPY). 44. Creating a disc with a DVD writer, recorder. 46
Customizing your camcorder
Using menus.. 53 Getting detailed information from the Handycam Handbook. 60
Troubleshooting. 61 Precautions.. 63 Specifications. 65
Screen indicators.. 70 Parts and controls. 71 Index.. 74
Step 1: Charging the battery pack
DC IN jack Battery pack DC plug
AC Adaptor /CHG (flash/charge) lamp
Power cord (Mains lead)
To the wall outlet (wall socket)
You can charge the InfoLITHIUM battery pack (V series) after attaching it to your camcorder.
Notes You cannot attach any InfoLITHIUM battery pack other than the V series to your camcorder.
Turn off your camcorder by closing the LCD screen. Attach the battery pack by aligning the battery terminals () and pushing the battery pack in the direction of the arrow () until it clicks. Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge) lamp turns off when the battery pack is fully charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder.
Tips See page 67 on recording and playing time. When your camcorder is on, you can check the approximate amount of remaining battery power with the remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Close the LCD screen. Pushing the PUSH (battery release) button (), remove the battery pack in the direction of the arrow ().
PUSH (battery release) button
To use a wall outlet (wall socket) as a power source
Make the same connections as Step 1: Charging the battery pack. Even if the battery pack is attached, the battery pack is not discharged.
Notes on the battery pack
When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure (Movie)/ (Photo) lamps (p.20), the access lamp (p.19) are turned off. that the The /CHG (flash/charge) lamp flashes during charging under the following conditions: The battery pack is not attached correctly. The battery pack is damaged. The temperature of the battery pack is low. Remove the battery pack from your camcorder and put it in a warm place. The temperature of the battery pack is high. Remove the battery pack from your camcorder and put it in a cool place. When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100 battery pack. We do not recommend using an NP-FV30, which only allows short recording and playback times, with your camcorder. In the default setting, the power turns off automatically if you leave your camcorder without any operation for about 5 minutes, to save battery power ([A.SHUT OFF]).
Notes on the AC Adaptor
Size of memory card you can use with your camcorder
Memory Stick PRO Duo media, half the size of Memory Stick, or standard size SD cards can be used for this camcorder. Do not attach a label or the like on memory card or memory card adaptor. Doing so may cause a malfunction.
Open the cover, and insert the memory card with the notched edge in the direction as illustrated until it clicks.
Close the cover after inserting the memory card.
Note direction of notched corner. Access lamp
The [Create a new Image Database File.] screen may appear if you insert a new memory card. In that case, touch [YES]. If you record only photos on the memory card, touch [NO].
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong direction, the memory card, memory card slot, or image data may be damaged.
Notes If [Failed to create a new Image Database File. It may be possible that there is not enough free space.] is displayed, format the memory card by touching FORMAT] (under.
[MANAGE MEDIA] category) [MEMORY CARD] [YES] [YES]
(MENU) [Show others] [MEDIA
To eject the memory card
Open the cover and lightly push the memory card in once.
Do not open the cover during recording. When inserting or ejecting the memory card, be careful so that the memory card does not pop out and drop.
Dubbing or copying movies and photos from the internal recording media to memory card
Touch (MENU) [Show others] [MOVIE DUB]/[PHOTO COPY] (under category), then follow the displays on the screen.
In the default setting, movies are recorded with high definition image quality (HD) on the following media. HDR-CX300E/CX305E/CX350E/CX350VE/CX370E: Internal memory HDR-XR350E/XR350VE: Internal hard disk
Tips To change the recording media, see page 17.
Fasten the grip belt.
To turn on your camcorder when the LCD screen is already open, press POWER (p.15). You can switch recording modes by pressing MODE. Press MODE to light up the desired recording mode lamp.
(Movie): When recording a movie (Photo): When recording a photo
Press START/STOP to start recording.
You can start recording also by touching in the bottom left of LCD screen.
Playback on the camcorder
In the default setting, movies and photos that are recorded on the following recording media are played. HDR-CX300E/CX305E/CX350E/CX350VE/CX370E: Internal memory HDR-XR350E/XR350VE: Internal hard disk
To turn on your camcorder when the LCD screen is already open, press POWER (p.15).
(VIEW IMAGES). Press
The VISUAL INDEX screen appears after some seconds.
You can display the VISUAL INDEX screen also by touching screen.
(VIEW IMAGES) on the LCD
or () a desired movie () to playback a movie. Touch Touch the (Photo) () a desired photo () to view a photo.
Movies are displayed and sorted by recording date.
Switches operating button display. To MENU screen Displays the screen to select the index type ([DATE INDEX]/[ MAP] (HDRCX350VE/XR350VE)/[ FILM ROLL]/[ FACE]). / : Displays movies recorded on the previous/next date.*
/ : Displays the previous/next movie. Returns to the recording screen.
* is displayed when is touched.
appears when the standard definition image quality (STD) movie is selected with [ / SET]. You can scroll the display by touching and dragging or. appears with the movie or photo that was most recently played or recorded. If you touch the movie or photo with , you can continue playback from the previous time. ( appears on the photo recorded on the memory card.)
Your camcorder starts playing the selected movie.
Volume adjustment Previous To stop To fast-reverse
Notes You may not be able to play back the images with other devices than camcorder.
Next OPTION To fast-forward To pause/play
Tips When playback from the selected movie reaches the last movie, the screen returns to the INDEX screen. / during pause to play back movies slowly. Touch / during playback, movies are played as fast as about 5 times As you repeat touching about 10 times about 30 times about 60 times. (MENU) [Show others] [VISUAL You can also display the VISUAL INDEX by touching [PLAYBACK] category). INDEX] (under The recording date, time, and shooting conditions , and coordinates (HDR-CX350VE/XR350VE) are recorded automatically during recording. This information is not displayed during recording, but you can (MENU) [Show others] [PLAYBACK SET] (under display it during playback by touching [PLAYBACK] category) [DATA CODE] a desired setting . In the default setting, a protected demonstration movie is pre-recorded (HDR-CX350E/CX350VE/CX370E/XR350E/XR350VE).
Connecting to a non-high-definition 16:9 (wide) or 4:3 TV
When you connect with component A/V cable
If you connect only component video plugs, audio signals are not output. Connect the white and red plugs to output audio signals.
When you connect with HDMI cable
A/V connecting cable with S VIDEO (sold separately)
Use an HDMI cable with the HDMI logo. Use an HDMI mini connector on one end (for the camcorder), and a plug suitable for connecting your TV on the other end. Copyright-protected images are not output from the HDMI OUT jack of your camcorder. Some TVs may not function correctly (e.g., no sound or image) with this connection. Do not connect the camcorder HDMI OUT jack to an external device HDMI OUT jack, as malfunction may result.
(White) (Red) (Yellow)
When you connect with A/V connecting cable with S VIDEO
On Photo TV HD
This camcorder is compatible with the Photo TV HD standard. Photo TV HD allows for highly-detailed, photo-like depiction of subtle textures and colors. By connecting Sonys Photo TV HDcompatible devices using an HDMI cable* or the component A/V cable**, a whole new world of photos can be enjoyed in breathtaking full HD quality.
* The TV will automatically switch to the ** Setup of the TV will be necessary. Please refer
When the S VIDEO plug (S VIDEO channel) is connected, audio signals are not output. To output audio signals, connect the white and red plugs to the audio input jack of your TV. This connection produces higher resolution images compared with the A/V connecting cable.
Notes When you play back standard definition image quality (STD) movies on a 4:3 TV that is not compatible with the 16:9 signal, record movies (MENU) with 4:3 aspect ratio. Touch [Show others] [OTHER REC SET] [SHOOTING SET] category) (under [ WIDE SELECT] [4:3] (p.56).
appropriate mode when displaying photos.
to the instructions of your Photo TV HDcompatible TV for details.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (sold separately) to view playback pictures.
Tips If you connect your camcorder to the TV using more than one type of cable to output images, the order of priority of the TV input jacks is as follows: HDMI component S VIDEO video HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The HDMI OUT jack outputs high quality images and digital audio.
Deleting movies and photos
You can free media space by deleting movies and photos from recording media.
Notes You cannot restore images once they are deleted. Save important movies and photos in advance. Do not remove the battery pack or the AC Adaptor from your camcorder while deleting the images. It may damage the recording media. Do not eject memory card while deleting images from the memory card. You cannot delete protected movies and photos. Undo the protection of the movies and photos to delete them, before you try to delete them. The demonstration movie on your camcorder is protected (HDR-CX350E/CX350VE/CX370E/ XR350E/XR350VE). If the deleted movie is included in the Playlist, the movie added to the Playlist is deleted also from the Playlist. If the deleted movie is included in the saved Highlight Playback scenario, the movie is also deleted from the scenario.
Step 1 Checking the computer system
OS*1 Microsoft Windows XP SP3*2/Windows Vista SP2*3/Windows 7
*1Standard installation is required. Operation is
not assured if the OS has been upgraded or in a multi-boot environment. *264-bit editions and Starter (Edition) are not supported. Windows Image Mastering API (IMAPI) Ver.2.0 or newer is required to use disc creation function, etc. *3Starter (Edition) is not supported. *4Faster processor is recommended.
Turn on the computer.
Log on as an Administrator for installation. Close all applications running on the computer before installing the software.
Notes Operation with all computer environments is not assured.
Place the supplied CD-ROM in the disc drive of your computer.
The installation screen appears.
When using a Macintosh
The supplied software PMB is not supported by Macintosh computers. To import the movies and photos to the computer, please contact Apple Inc.
If the screen does not appear, click [Start] [Computer] (in Windows XP, [My Computer]), then double-click [SONYPMB (E:)] (CD-ROM)*. * Drive names (such as (E:)) may vary depending on the computer.
Step 2 Installing the supplied software PMB
Install PMB before connecting your camcorder to a computer.
Notes If a version of PMB under 5.0.00 has been installed on your computer, you may be unable to use some functions of those PMB when installing the PMB from the supplied CDROM. Also, PMB Launcher is installed from the supplied CD-ROM and you can start PMB or other software by using the PMB Launcher. Double-click the PMB Launcher short-cut icon on the computer screen to start PMB Launcher.
Select the country or region. Select the language for the application to be installed, then proceed to the next screen. Read the terms of the license agreement carefully. If you agree to the terms, change to , and then click [Next] [Install].
Confirm that your camcorder is not connected to the computer.
Turn on your camcorder, then connect the camcorder to the computer using the supplied USB cable.
the installation screen appears, follow the instructions to install the required software. Restart the computer if required to complete the installation.
When the installation is completed, following icons will appear. Remove the CD-ROM from your computer.
Connect your camcorder to the input jacks of the recording device.
Start playback on your camcorder, and record it on the recording device.
OUTPUT] [V-OUT/PANEL] . When the screen size of display devices (TV, (MENU) [Show etc.) is 4:3, touch others] [OUTPUT SETTINGS] (under [GENERAL SET] category) [TV TYPE] . [4:3] When you connect a monaural device, connect the yellow plug of the A/V connecting cable to the video input jack, and the white (left channel) or the red (right channel) plug to the audio input jack on the device.
Refer to the instruction manuals supplied with your recording device for details.
When dubbing is finished, stop the recording device, and then your camcorder.
Notes Since dubbing is performed via analog data transfer, the image quality may deteriorate. You cannot dub images to recorders connected with an HDMI cable. To hide the screen indicators (such as a counter, etc.) on the screen of the monitor device (MENU) [Show connected, touch others] [OUTPUT SETTINGS] (under [GENERAL SET] category) [DISP OUTPUT] [LCD PANEL] (the default . setting) To record the date/time, coordinates (HDRCX350VE/XR350VE), or camera settings data, (MENU) [Show others] touch [PLAYBACK] [PLAYBACK SET] (under category) [DATA CODE] a desired . In setting (MENU) [Show addition, touch others] [OUTPUT SETTINGS] (under [GENERAL SET] category) [DISP
Using the menus, you can perform useful functions and change various settings. If you make good use of menu operations, you can enjoy using your camcorder. The camcorder has various menu items under each of eight menu categories. MANUAL SETTINGS (Items to adjust for scene condition) p.56 SHOOTING SET (Items for customized shooting) p.56 PHOTO SETTINGS (Items for recording photos) p.57 PLAYBACK (Items for playback) p.57 EDIT (Items for editing) p.57 OTHERS (Items for other settings) p.58 MANAGE MEDIA (Items for recording media) p.58 GENERAL SET (Other setup items) p.59
Menu items are described in more details in the Handycam Handbook.
You can touch buttons and drag the screen to scroll the list of the menu. The selected category icon is displayed in orange. , the screen returns to the MY MENU screen. When you touch
: The menu list moves from category to category. : The menu list moves through 4 items at once.
Touch (MENU). Touch [Show others] on the MY MENU screen.
DELETE DELETE.. Deletes movies. DELETE.. Deletes photos. SCENARIO ERASE ERASE.. Erases scenarios saved in Highlight Playback. ERASE ALL.. Erases all scenarios saved in Highlight Playback. PROTECT PROTECT.. Protects movies to avoid deleting. PROTECT.. Protects photos to avoid deleting. DIVIDE. Divides movies. PHOTO CAPTURE. Captures photos from desired scenes of movies. MOVIE DUB DUB by select. Selects movies and dub. DUB by date. Dubs all movies of a specified date. DUB ALL/ DUB ALL. Dubs all saved movies in a playlist.
PHOTO COPY COPY by select. Selects photos and copy. COPY by date. Copies all photos of a specified date. PLAYLIST EDIT ADD/ ADD. Adds movies in a playlist. ADD by date/ ADD by date. Adds movies recorded on a same day at one time in a playlist. ERASE/ ERASE. Erases movies from a playlist. ERASE ALL/ ERASE ALL.. Erases all movies from a playlist. MOVE/ MOVE. Changes the order of movies in a playlist.
YOUR LOCATION*1. Displays the current location on a map. USB CONNECT USB CONNECT*2. Connects the internal memory via USB. USB CONNECT*3. Connects the internal hard disk via USB. USB CONNECT. Connects the memory card via USB. (DISC BURN) DISC BURN. Allows you to save images onto discs by pressing the button (p.39). TV CONNECT Guide. Introduces the connection method depending on the TV type connected (p.28). MUSIC TOOL*4 EMPTY MUSIC. Deletes music files. DOWNLOAD MUSIC. Download music files that can be played with Highlight Playback. BATTERY INFO.. Displays the battery information.
(MANAGE MEDIA) category
MEDIA SETTINGS MOVIE MEDIA SET.. Sets the media for recording movies (p.17). PHOTO MEDIA SET. Sets the media for recording photos (p.17). MEDIA INFO. Displays information on the recording media, such as free space. MEDIA FORMAT INT. MEMORY*2.. Deletes all data on the internal memory. HDD*3.. Deletes all data on the internal hard disk. MEMORY CARD.. Deletes all data on the memory card. REPAIR IMG.DB F. INT. MEMORY*2.. Repairs the image database file on the internal memory (p.63). HDD*3.. Repairs the image database file on the internal hard disk (p.63). MEMORY CARD.. Repairs the image database file on the memory card (p.63).
(GENERAL SET) category
It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. This is not a malfunction. Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. If your camcorder still does not work, press RESET (p.72) using a pointed object. (If you press RESET, all settings, including the clock setting, are reset.) The temperature of your camcorder is extremely high. Turn off the camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Leave the camcorder with the power turned on. If you still cannot operate your camcorder, turn off the camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder.
Your camcorder gets warm.
Your camcorder may become warm during operation. This is not a malfunction.
The power abruptly turns off.
Use the AC Adaptor (p.14). Turn on the power again. Charge the battery pack (p.12).
Pressing START/STOP or PHOTO does not record images.
The power does not turn on.
Attach a charged battery pack to the camcorder (p.12). Connect the plug of the AC Adaptor to the wall outlet (wall socket) (p.14).
Press MODE to turn on the (Movie) or (Photo) lamp. Your camcorder is recording the image you have just shot on the recording media. You cannot make any new recordings during this period. The recording media is full. Delete unnecessary images (p.31). Total number of movie scenes or photos has exceeded the recordable capacity of your camcorder. Delete unnecessary images (p.31).
The recording stops.
The temperature of your camcorder is extremely high/low. Turn off your camcorder and leave it for a while in a cool/warm place.
The battery pack temperature is high. Change the battery pack or place it in a cool place.
PMB cannot be installed.
C:13: / C:32:
Check the computer environment or installation procedure required to install PMB (p.33).
Remove the power source. Reconnect it and operate your camcorder again.
PMB does not work correctly.
Follow the steps from to on page 61.
Picture: 6.7 cm (2.7 type, aspect ratio 16:9) Total number of pixels: (960 240)
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V, 50 Hz/60 Hz Current consumption: 0.35 A - 0.18 A Power consumption: 18 W Output voltage: DC 8.4 V* Operating temperature: 0 C to 40 C (32 F to 104 F) Storage temperature: 20 C to +60 C (-4 F to +140 F) Dimensions (approx.): 81 mm (1 15/3/1/4 in.) (w/h/d) excluding the projecting parts Mass (approx.): 170 g (6.0 oz) excluding the power cord (mains lead)
* See the label on the AC Adaptor for other
Power requirements: DC 6.8 V/7.2 V (battery pack) DC 8.4 V (AC Adaptor) Average power consumption: During camera recording, using LCD screen at normal brightness: HDR-CX300E/CX305E/CX350E/CX350VE/ CX370E HD: 3.0 W STD: 2.3 W HDR-XR350E/XR350VE HD: 3.3 W STD: 2.6 W Operating temperature: 0 C to 40 C (32 F to 104 F) Storage temperature: 20 C to +60 C (-4 F to +140 F)
Rechargeable battery pack NP-FV50
Maximum output voltage: DC 8.4V Output voltage: DC 6.8V Maximum charge voltage: DC 8.4V Maximum charge current: 2.1A Capacity Typical: 7.0Wh (1 030mAh) Minimum: 6.6Wh (980mAh) Type: Li-ion Design and specifications of your camcorder and accessories are subject to change without notice. Manufactured under license from Dolby Laboratories.
Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming.
Expected recording time of movies in the internal recording media
Internal memory HDR-CX300E/CX305E
To set the recording mode, touch (MENU) [Show others] [ REC [SHOOTING SET] MODE] (under category). In the default setting, the recording mode is [HD HQ].
Expected charging and running time for the supplied battery pack (in minute)
Charging time (full charge) Continuous recording time Typical recording time Playback time 200
High definition image quality (HD) in h (hour) and m (minute)
[HD FX] [HD FH] [HD HQ]
1 h 25 m 1 h 55 m 3 h 50 m 6 h 35 m
Standard definition image quality (STD) in h (hour) and m (minute)
3 h 55 m
Charging time (full charge) Continuous recording time Typical recording time Playback time
HDR-CX350E/CX350VE High definition image quality (HD) in h (hour) and m (minute)
Recording mode Recording time Additional information HDR-CX350E
3h 3 h 55 m 7 h 50 m 13 h 20 m
2 h 55 m 3 h 45 m 7 h 35 m 13 h
|Product Type||Camcorder - 1080i|
|Camcorder Sensor Resolution||4.2 Mpix|
|Camcorder Effective Video Resolution||2.65 Mpix|
|Camcorder Effective Still Resolution||3.54 Mpix|
|Camcorder Interpolated Still Resolution||7.0 Mpix|
|Widescreen Video Capture||Yes|
|Media Type||Hard disk drive, flash card|
|Optical Sensor Type||Exmor R CMOS|
|Optical Sensor Size||1/4"|
|Min Illumination||3 lux|
|Analog Video Format||PAL|
|Digital Zoom||160 x|
|Recording Speed||SP, LP, FH, HQ, FX|
|Shooting Modes||Digital photo mode|
|Shooting Programs||Spotlight, landscape, portrait mode, twilight portrait, fireworks, twilight mode, sunset, candle, beach, snow, sunrise|
|Digital Scene Transition||White fader, black fader|
|Image Stabilizer||Optical (Steady Shot)|
|Max Shutter Speed||1/1000 sec|
|Min Shutter Speed||1/8 sec|
|Exposure Modes||Program, automatic|
|White Balance||Custom, automatic, presets|
|White Balance Presets||Indoor, outdoor|
|Digital Video Format||MPEG-2, AVCHD|
|Still Image Format||JPEG|
|Remote Control||Remote control - infrared|
|Supported Resolution||1080i, 1080p|
|Memory / Storage|
|Supported Flash Memory||Memory Stick Duo, SD Memory Card, Memory Stick PRO Duo, SDHC Memory Card, Memory Stick PRO-HG Duo|
|Hard Drive||Hard disk drive - built-in - 160 GB|
|Image Storage||JPEG 3072 x 2304 JPEG 3072 x 1728 JPEG 640 x 480|
|Camera Flash||Built-in flash|
|Flash Modes||Auto mode|
|Effective Flash Range||1 ft - 5 ft|
|Type||Zoom lens - 2.9 mm - 34.8 mm - f/1.8-3.4|
|Focal Length||2.9 mm - 34.8 mm|
|Focus Adjustment||Automatic, manual|
|Auto Focus||TTL contrast detection|
|Optical Zoom||12 x|
|Zoom Adjustment||Motorized drive|
|Filter Size||30 mm|
|Features||Built-in lens shield|
|Low Lux / Night Mode||Yes|
|Digital Still Camera Function||Yes|
|Search Modes||Index search, face index search|
|Additional Features||Direct print, USB 2.0 compatibility, touch-screen control, built-in speaker, backlight compensation, digital noise reduction, PictBridge support, accessories hot shoe, Scene Detection Technology, Dolby Digital AC-3 (2 channel) recording, face-priority AF function, takes photos while movie recording, Golf Shot function, Dynamic Range Optimizer, face detection, Smile Detection technology|
|Type||LCD display - TFT active matrix - 2.7" - color|
|Display Form Factor||Rotating|
|Display Format||230,400 pixels|
|Type||Microphone - built-in|
|Microphone Technology||Electret condenser|
|Microphone Operation Mode||Stereo|
|Connector Type||1 x composite video/audio output 1 x USB 1 x component video output 1 x HDMI output 1 x S-Video output 1 x remote control|
|Expansion Slot(s)||1 x Memory Stick PRO Duo 1 x SD Memory Card|
|Software||Drivers & Utilities, Sony Picture Motion Browser|
|System Requirements for PC Connection|
|Operating System Support||MS Windows 7, MS Windows XP SP3, MS Windows Vista|
|Peripheral Devices||USB port, CD-ROM drive|
|Cables Included||A/V cable USB cable Component video / audio cable|
|Power Device||Power adapter - external|
|Supported Battery||Sony NP-FV50|
|Supported Battery Details||1 x Li-ion rechargeable battery ( included )|
|Service & Support||1 year warranty|
|Service & Support Details||Limited warranty - 1 year|
|Min Operating Temperature||32 °F|
|Max Operating Temperature||104 °F|
|Universal Product Identifiers|
R16 Sync Startac 130 Siemens CF61 Documentation KH 2000 Star450-315 ZF411C Stand SS-400B GR-M492YLY AKG C419 HQ6920 RL44qtus CS-ME7dkeg Excursion-2002 HD3U-120 Manager YP-S2ZB JBL L150 TXP42S20ES PRO 7400 DCR-DVD410E Eagle 35 MXB-4175 SE 100 Lexington C32 MS-2645DPA BAA938HG-E DVP-NS50p-B - 2003 WD-80480F Clock FW-C700 34 HK6300 Advantage85 S450 SIM Sorrow VPL-EX70 Suite XL Continental Pentax Z-1 96350 LP-7100 Alcatel-lucent 4019 Psr-630 SCX-4520 Intellivision II Stylus P50 MP390 DZ-BD10H AL2416W YST-SW120 MDS-JB930 SC-PT165 AIR Z Novation XIO MZ-42PZ44 Of Doom Navigator 2002 2530I NW-S705F Syncmaster 793V Micra Triton 200 Lifestyle V20 TX1500B XL700-2000 Cappucino Ring Price Cuue12JKE Generation Rally 50 Quattro Plus Revenge Aopen AK73 GT-9700F Bizhub 250 Conference Unit ALL-IN-ONE SV-640F Kaleo Martin M1 Ccradio KX-TC1520B M4212C-BAP LAV88830-W 81302 BD-C7500 DP-01FX BBA 2866 ESD 9270 1730 V PS50A456 CS3 PRO AM 12 C9 25-S XL30U CD 2703 Lustre 2011 EM-30 RC-50
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101