Note to CATV system installer:
This reminder is provided to call CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

For customers in Europe

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for the customer in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

About This Manual

The instructions in this manual are for model HT-SF2300 and HT-SS2300. In this manual, models of area code CEL is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, Models of area code CEL only.
The HT-SF2300 consists of:
Receiver Speaker systema) Front speaker Center speaker Surround speaker Subwoofer STR-KS2300 SS-MSP23F SS-CNP23 SS-SRP23F SS-WP23 STR-KS2300 SS-MSP23S SS-CNP23 SS-SRP23S SS-WP23
This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. ** Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. 1996-2007 DTS, Inc. All Rights Reserved. This receiver incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. x.v.Colour and x.v.Colour logo are trademarks of Sony Corporation. BRAVIA and Sony Corporation. are trademarks of

The HT-SS2300 consists of:
Receiver Speaker systema) Front speaker Center speaker Surround speaker Subwoofer
Be sure to use only the supplied speakers.
The instructions in this manual describe the controls on the supplied remote. You can also use the controls on the receiver if they have the same or similar names as those on the remote.

About area codes

The area code of the receiver you purchased is shown on the lower portion of the rear panel (see the illustration below).

SPEAKERS

FRONT R

FRONT L

CENTER SUBWOOFER

Area code

Any differences in operation, according to the area code, are clearly indicated in the text, for example, Models of area code AA only.
Note for the supplied remote
RM-AAU022 (Models of area code U, UC, CA only) RM-AAU023 (Models of area code CEL, CEK, AU, TW, TH only)

Table of Contents

Getting Started
Description and location of parts.7 1: Installing the speakers..14 2: Connecting the speakers.17 3: Connecting the audio/video components..19 4: Connecting the antennas.24 5: Preparing the receiver and the remote..24 6: Calibrating the appropriate settings automatically (AUTO CALIBRATION)..26 7: Adjusting the speaker levels and balance (TEST TONE)..30

Tuner Operations

Listening to FM/AM radio. 49 Presetting radio stations.. 50 Using the Radio Data System (RDS).. 52 (Models of area code CEL, CEK only)

Control for HDMI

Using the Control for HDMI function for BRAVIA Sync. 54 Preparing Control for HDMI function. 56 Watching a DVD (One-Touch Play). 57 Enjoying the TV sound from the speakers connected to the receiver (System Audio Control).. 58 Turning off the receiver with the TV (System Power Off). 59

Playback

Selecting a component..32 Listening/Watching a component.33
Other Operations Amplifier Operations
Navigating through menus..35 Adjusting the level (LEVEL menu).39 Adjusting the tone (TONE menu)..40 Settings for the surround sound (SUR menu)..40 Settings for the tuner (TUNER menu).41 Settings for the audio (AUDIO menu).41 Settings for the video (VIDEO menu).42 Settings for the system (SYSTEM menu).43 Switching between digital and analog audio (IN MODE).. 60 Enjoying the DIGITAL MEDIA PORT (DMPORT).. 60 Using the Sleep Timer.. 62

Using the Remote

Changing button assignments. 63
Additional Information Enjoying Surround Sound
Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT).45 Selecting a pre-programmed sound field..46 Using only the front speakers and subwoofer (2CH STEREO)..48 Resetting sound fields to the initial settings..48 6GB Glossary.. 64 Precautions.. 65 Troubleshooting.. 67 Specifications... 71 Index... 75

AUTO CAL G D.TUNING D.SKIP H ENTER

B ?/1 (on/standby)

MEMORY I AMP MENU
C Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components. You can change the button assignments following the steps in Changing button assignments on page 63. D 2CH A.F.D. MOVIE MUSIC E THEATER (RM-AAU022 only) THEATRE (RM-AAU023 only) Press to enjoy optimal image suited for movies and to output the sound from the speakers connected to this receiver automatically. Note This button will only function if your TV is compatible with Theater Mode. Refer to the operating instructions supplied with the TV for details. Press to select a sound field.

J TOOLS/ OPTIONS

K MUTING
L TV VOL +a)/ MASTER VOL +a)/
Press TV and the button with orange printing at the same time to enable TV operation. Press to return to the previous menu. exit the menu while the menu or on-screen guide of the VCR, DVD player, satellite tuner or Blu-ray disc player is displayed on the TV screen. Press RETURN/EXIT O and TV (O) at the same time to return to the previous menu or exit the TVs menu while the menu is displayed on the TV screen. After pressing DVD/BD MENU (F), AMP MENU (I), or MENU/HOME (M), press V, v, B or b to select the settings. Then, press to enter the selection if you have pressed DVD/BD MENU or MENU/HOME previously. Press also to enter the selection of the receiver, VCR, satellite tuner, CD player, DVD player or Blu-ray disc player. Press to select information displayed on the TV screen of the VCR, satellite tuner, CD player, DVD player or Bluray disc player. Press DISPLAY and TV (O) at the same time to display TVs information on the TV screen.
M MENU/HOME Press to display the menu of the VCR, DVD player, satellite tuner or Blu-ray disc player on the TV screen. Press MENU/HOME and TV (O) at the same time to display the TVs menu. Then, use V, v, B, b and (Q) to perform menu operations. N./>b) Press to skip a track of the CD player, DVD player or Blu-ray disc player.

P RETURN/ EXIT O

REPLAY < / Press to replay the previous ADVANCE < scene or fast forward the current scene of the VCR, DVD player or Blu-ray disc player. m/Mb) Press to search tracks in the forward/ reverse direction of the DVD player. start fast forward/rewind of the VCR, CD player or Bluray disc player. Press to start playback of the VCR, CD player, DVD player, or Blu-ray disc player. Press to pause playback or recording of the VCR, CD player, DVD player or Blu-ray disc player. (Also starts recording with components in recording standby.) Press to stop playback of the VCR, CD player, DVD player or Blu-ray disc player. Press TV CH +/ and TV (O) at the same time to select preset TV channels. Press to select preset stations. preset channels of the VCR or satellite tuner. Press to scan a station. Press to select the FM monaural or stereo reception.

* The measurement result is not utilized for signals with a sampling frequency of more than 96 kHz.
Before you perform Auto Calibration
Before you perform the Auto Calibration, set up and connect the speakers (page 14, 17). The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones to this jack. Doing so may damage the receiver and the microphone. During the calibration, the sound that comes out of the speakers is very loud. The volume of the sound cannot be adjusted. Pay attention to the presence of children or to the effect on your neighborhood. Perform the Auto Calibration in a quiet environment to avoid the effect of noise and to get a more accurate measurement. If there are any obstacles in the path between the optimizer microphone and the speakers, the calibration cannot be performed correctly. Remove any obstacles from the measurement area to avoid measurement error. Note
If the muting function has been activated before you perform Auto Calibration, the muting function will be set to off automatically.
The DCAC is designed to obtain proper sound balance in your room. However, you can adjust the speaker levels and balance manually according to your preference. For details, see 7: Adjusting the speaker levels and balance (TEST TONE) (page 30).

Example: HT-SS2300

Optimizer microphone
Performing Auto Calibration
TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1

?/1 switch Input buttons

VIDEO1

VIDEO2

AUTO CAL

AMP MENU MUTING

O RETURN/EXIT MENU/HOME

MASTER VOL +/

Connect the supplied optimizer microphone to the AUTO CAL MIC jack on the front panel. Set up the optimizer microphone.
Place the optimizer microphone at your listening position.You can also use a stool or tripod so that the optimizer microphone remains at the same height as your ears.
Press AMP MENU, then press AUTO CAL.
You can also select A.CAL YES in the A. CAL menu. The following appears on the display. A.CAL [5] t A.CAL [4] t A.CAL [3] t A.CAL [2] t A.CAL [1] The measurement process will take approximately 30 seconds to complete. The table below shows the display when measurement starts.
Measurement for Speaker existance Speaker gain, distance, frequency response Subwoofer gain and distance Display TONE T.S.P. WOOFER
When you face the speaker towards the optimizer microphone, you will get a more accurate measurement.
You cannot measure the speaker height of the surround speakers. Set this value using SUR POS. parameters in the SYSTEM menu (page 37).

Play back the disc. Adjust to a suitable volume. After you have finished watching the DVD/ Blu-ray disc, eject the disc and turn off the receiver, TV and DVD player/Blu-ray disc player.

Amplifier Operations

To return to the previous display

Press B.

Navigating through menus
By using the amplifier menus, you can make various adjustments to customize the receiver.

To exit the menu

Press AMP MENU. Note
Some parameters and settings may appear dimmed on the display. This means that they are either unavailable or fixed and unchangeable.
Press V/v repeatedly to select the menu you want. Press menu. or b to enter the
Press V/v repeatedly to select the parameter you want to adjust. Press or b to enter the parameter. Press V/v repeatedly to select the setting you want.
The setting is entered automatically.

Overview of the menus

The following options are available in each menu. For details on navigating through menus, see page 35.
Menu [Display] LEVEL [1-LEVEL] (page 39) Parameters [Display] Test tonea) [T. TONE] Front speaker balancea) [FRT BAL] Center speaker level [CNT LVL] Surround left speaker level [SL LVL] Surround right speaker level [SR LVL] Subwoofer level [SW LVL] Dynamic range compressora) [D. RANGE] TONE [2-TONE] (page 40) Front speaker bass level [BASS LVL] Front speaker treble level [TRE LVL] Sound field selectiona) [S.F. SELCT] Effect levela)b) [EFFECT] FM station receiving modea) [FM MODE] Settings T. TONE N, T. TONE Y Initial setting T. TONE N
BAL. L +1 to BAL. L +10, BALANCE BALANCE, BAL. R +1 to BAL. R +10 CNT 10 dB to CNT +10 dB (1 dB step) SUR L 10 dB to SUR L +10 dB (1 dB step) SUR R 10 dB to SUR R +10 dB (1 dB step) SW 10 dB to SW +10 dB (1 dB step) COMP. OFF, COMP. STD, COMP. MAX BASS 10 dB to BASS +10 dB (0.5 dB step) TRE 10 dB to TRE +10 dB (0.5 dB step) For details, see Enjoying Surround Sound (page 45). EFCT. MIN, EFCT. STD, EFCT. MAX FM MONO, FM AUTO CNT 0 dB SUR L 0 dB SUR R 0 dB SW 0 dB COMP. OFF BASS 0 dB TRE 0 dB A.F.D. AUTO EFCT. STD FM AUTO

SUR [3-SUR] (page 40)

TUNER [4-TUNER] (page 41)
Menu [Display] AUDIO [5-AUDIO] (page 41)
Parameters [Display] Digital audio input decoding prioritya) [DEC. PRI.]
Settings DEC. PCM, DEC. AUTO
Initial setting DEC. PCM for: SA-CD/CD; DEC. AUTO for: VIDEO 1, VIDEO 2, BD, SAT, TV, DVD DUAL M
Digital broadcast language selectiona) [DUAL] Synchronizes audio with video outputa) [A.V. SYNC.] Switching the audio input modea) [IN MODE] VIDEO [6-VIDEO] (page 42) Audio for HDMIa)c) [AUDIO FOR HDMI] Control for HDMIa)c) [CONTROL FOR HDMI] Front left speaker distancea)d) [FL DIST.]
DUAL M, DUAL S, DUAL M/S, DUAL M+S A.V.SYNC. 0 to A.V.SYNC. 20

A.V.SYNC. 0

For details, see Switching between digital and analog audio (IN MODE) (page 60). AMP, TV+AMP CTRL ON, CTRL OFF DIST. 1.0 m to DIST. 7.0 m (DIST. 3 ft. to DIST. 22 ft.) (0.1 m (1 ft.) step) AMP CTRL OFF DIST. 3.0 m (DIST. 9 ft.) DIST. 3.0 m (DIST. 9 ft.) DIST. 3.0 m (DIST. 9 ft.) DIST. 3.0 m (DIST. 9 ft.) DIST. 3.0 m (DIST. 9 ft.) DIST. 3.0 m (DIST. 9 ft.) SIDE/LO 0% dim

Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. COMP. STD is the standard setting, but it only enacts light compression. Therefore, we recommend using the COMP. MAX setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression.

LEVEL menu parameters

x T. TONE (Test tone)
Lets you adjust the speaker levels and balance while listening to the test tone from your listening position. For details, see 7: Adjusting the speaker levels and balance (TEST TONE) (page 30).
x FRT BAL (Front speaker balance)
Lets you adjust the balance between front left and right speakers.
x CNT LVL (Center speaker level) x SL LVL (Surround left speaker level) x SR LVL (Surround right speaker level) x SW LVL (Subwoofer level)

Adjusting the tone

(TONE menu)
You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. Select 2-TONE in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 35) and Overview of the menus (page 36).
Settings for the surround sound

(SUR menu)

You can use the SUR menu to select the sound field you want for your listening pleasure. Select 3-SUR in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 35) and Overview of the menus (page 36).

TONE menu parameters

x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level)

SUR menu parameters

x S.F. SELCT (Sound field selection)
Lets you select the sound field you want. For details, see Enjoying Surround Sound (page 45). Note
The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). For example, if you select HALL for the SA-CD/CD input, then change to a different input and then return to SA-CD/CD, HALL will automatically be applied again.

x EFFECT (Effect level)

Lets you adjust the presence of the surround effect for sound fields selected with the MOVIE or MUSIC button. EFCT. MIN The surround effect is minimum. EFCT. STD The surround effect is standard. EFCT. MAX The surround effect is maximum.

Settings for the tuner

(TUNER menu)

PRO LOGIC [DOLBY PL]

4 channel
PRO LOGIC II MOVIE 5 channel [PLII MV]
PRO LOGIC II MUSIC [PLII MS] MULTI STEREO [MULTI ST.]

5 channel (Multi Stereo)

Selecting a preprogrammed sound field
You can take advantage of surround sound simply by selecting one of the receivers preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home.

2CH A.F.D.

MUSIC MOVIE
Press MOVIE repeatedly to select a sound field for movies or press MUSIC repeatedly to select a sound field for music.
You can also use SOUND FIELD + or SOUND FIELD on the receiver. For details, see Types of sound field available (page 47).
Types of sound field available
Sound field for Movie Sound field [Display] CINEMA STUDIO EX A DCS [C.ST.EX A] Effect Reproduces the sound characteristics of the Sony Pictures Entertainment Cary Grant Theater cinema production studio. This is a standard mode, great for watching almost any type of movie. Reproduces the sound characteristics of the Sony Pictures Entertainment Kim Novak Theater cinema production studio. This mode is ideal for watching science-fiction or action movies with lots of sound effects. Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or films where orchestra music is featured in the soundtrack. Reproduces the acoustics of a classical concert hall. Reproduces the acoustics of a jazz club. Reproduces the acoustics of a 300-seat live house. Reproduces the feeling of a large open-air stadium. Reproduces the feeling of sports broadcasting.
CINEMA STUDIO EX B DCS [C.ST.EX B]
CINEMA STUDIO EX C DCS [C.ST.EX C]
HALL [HALL] JAZZ CLUB [JAZZ] LIVE CONCERT [CONCERT] STADIUM [STADIUM] SPORTS [SPORTS]
PORTABLE AUDIO Reproduces a clear enhanced sound image from your portable ENHANCER [PORTABLE] audio device. This mode is ideal for MP3 and other compressed music.
The effects provided by the virtual speakers may cause increased noise in the playback signal. When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. This function does not work when: signals with a sampling frequency of more than 48 kHz is input. the multi channel Linear PCM signals are received via an HDMI IN jack.

AUTO CAL D.TUNING D.SKIP MEMORY AMP MENU ENTER
Press D.TUNING. Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
O RETURN/EXIT MENU/HOME TV CH TV CH + PRESET REPLAY ADVANCE PRESET + < <. > TUNING m H TUNING + M

Press ENTER.

If you cannot tune in a station
Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.
Tune in the station that you want to preset using automatic tuning (page 49) or direct tuning (page 50).
Switch the FM reception mode, if necessary (page 49).

Press MEMORY.

MEMORY lights up for a few seconds. Perform steps 4 and 5 before MEMORY goes out.
Press the numeric buttons to select a preset number.
You can also press the PRESET + or PRESET to select a preset number. If MEMORY goes out before you select the preset number, start again from step 3.
Tuning to preset stations
The station is stored as the selected preset number. If MEMORY goes out before you press ENTER, start again from step 3.

Numeric buttons

Repeat steps 1 to 5 to preset another station.
RETURN/EXIT MENU/HOME TV CH TV CH + PRESET REPLAY ADVANCE PRESET + < <. > TUNING m H TUNING + M
Press TUNER repeatedly to select the FM or AM band. Press PRESET + or PRESET repeatedly to select the preset station you want.
Each time you press the button, you can select a preset station as follows:

05 28. 27

You can also press the numeric buttons to select the preset station you want. Then, press ENTER to enter the selection.
Using the controls on the receiver
1 Press INPUT SELECTOR + or INPUT
SELECTOR repeatedly to select the FM or AM band. 2 Press PRESET TUNING + or PRESET TUNING repeatedly to select the preset station you want. 51GB

WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN
Stock market reports and trading, etc. Programs for children Programs about people and the things that affect them Programs of religious content Programs where members of the public express their views by phone or in a public forum Programs about travel. Not for announcements that are located by TP/TA. Programs on recreational activities such as gardening, fishing, cooking, etc. Jazz programs Country music programs Programs featuring the popular music of the country or region Programs featuring oldies music Folk music programs Investigative features Any programs not defined above

TRAVEL

LEISURE
JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT NONE
Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component.
Using the Control for HDMI function for BRAVIA Sync
To use BRAVIA Sync, set the Control for HDMI function as explained below. By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable (not supplied), operation is simplified as follows: One-Touch Play: When you play back a component such as a DVD/Blu-ray disc player, the receiver and the TV are turned on automatically and switched to the appropriate HDMI input. System Audio Control: While watching TV, you can select to output the sound from the TV speaker or the speakers connected to the receiver. System Power Off: When you turn off the TV, the receiver and connected components are also turned off simultaneously. Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (HighDefinition Multimedia Interface).
The Control for HDMI function does not work in the following cases:
When you connect the receiver to a component which does not correspond with Sony Control for HDMI function. When you connect the receiver and components using other than HDMI connection. We recommend that you connect the receiver to products featuring BRAVIA Sync.
Connecting a TV and other components
Before connecting the cords, be sure to disconnect the AC power cord.
To enjoy TV multi channel surround sound broadcasting
You can listen to TV multi channel surround sound broadcasting from the speakers connected to the receiver. Connect the OPTICAL output jack of the TV to the TV OPT IN jack of the receiver.
DVD player Audio/video signals Blu-ray disc player Audio/video signals
Satellite tuner/Set-top box Audio/video signals

Audio signals TV, etc.

Audio/video signals
B Optical digital cord (not supplied)a) C Audio cord (not supplied)a)

Connect at least one of the audio cords (B or C).
5 Set the Control for HDMI function for the
Preparing Control for HDMI function
This receiver supports the Control for HDMIEasy Setting function. This function is only available for certain types of TV. When you perform the Control for HDMI-Easy Setting from the TV, the Control for HDMI setting on this receiver will automatically change accordingly. During Control for HDMI-Easy Setting operation, CONTROL, SCAN FOR and HDMI appear sequentially in the display. This receiver will automatically change the input to HDMI input. When the setting is completed, COMPLETE appears on the display. For details, refer to the operating instructions of the TV. If your TV does not support the Control for HDMI-Easy Setting function, do the following procedures. For details on setting the TV and connected components, refer to the operating instructions of the respective components. 1 Make sure that the receiver is connected to the TV and components (compatible with Control for HDMI function) via HDMI connection. 2 Turn on the receiver, TV and connected components. 3 Set the respective Control for HDMI function for the receiver and TV to on. See To set Control for HDMI (page 57). For details on setting the TV, refer to the operating instructions of the TV. 4 Select the HDMI input of the receiver and TV to match the HDMI input of the connected component, so that the image from the connected component is displayed.
connected component to on. If the Control for HDMI function for the connected component is already set to on, you do not need to change the setting. 6 Repeat step 4 and 5 for other components that you want to use the Control for HDMI function. Notes
If you unplug and reconnect the HDMI cable, be sure to repeat steps 1 to 6 above. You cannot perform One-Touch Play and System Audio Control during Control for HDMI-Easy Setting operation. Before you do the Control for HDMI-Easy Setting from the TV, be sure to turn on the TV, connected components and receiver. If the playback components cannot function after you have made the settings for Control for HDMIEasy Setting, check the Control for HDMI setting on your TV. If the connected components do not support Control for HDMI-Easy Setting, you need to set the Control for HDMI function for the connected components to on before you perform the Control for HDMI-Easy Setting from the TV.

To set Control for HDMI

Watching a DVD

(One-Touch Play)

D.TUNING
D.SKIP MEMORY AMP MENU ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL

To clear all remote button assignments
Press ?/1, DMPORT and MASTER VOL at the same time. The remote is reset to its factory settings. 63GB

x Dolby Digital

Additional Information

Glossary

x Cinema Studio EX
A surround sound mode that can be regarded as the compilation of Digital Cinema Sound technology, delivers the sound of a dubbing theater using three technologies: Virtual Multi Dimensions, Screen Depth Matching, and Cinema Studio Reverberation. Virtual Multi Dimensions, the virtual speaker technology, creates a virtual multisurround environment with actual speakers up to 7.1 channels, and brings the surround sound experience of a theater with the latest facilities into your home. Screen Depth Matching reproduces treble attenuation, fullness, and depth of sound usually created in a theater using sound emission from behind the screen. This is then added to the front and center channels. Cinema Studio Reverberation reproduces the sound characteristics of state-of-the-art dubbing theaters and recording studios, including Sony Pictures Entertainments dubbing studios. There are three modes, A/B/ C, available according to the studio type.
Digital audio encoding/decoding technology developed by Dolby Laboratories, Inc. It consists of front (Left/Right), center, surround (Left/Right) and subwoofer channels. It is a designated audio standard for DVD-video and also known as 5.1 channel surround. Since surround information is recorded and reproduced in stereo, more realistic sound with fuller presence is delivered than with Dolby surround.

x Dolby Pro Logic II

This technology converts 2 channel stereo recorded audio into 5.1 channel for playback. There is a MOVIE mode for movies and MUSIC mode for stereo sources such as music. Old movies encoded in the traditional stereo format can be enhanced with 5.1 channel surround sound.
x Dolby Surround (Dolby Pro Logic)
Audio processing technology developed by Dolby Laboratories, Inc. Center and mono surround information is matrixed into two stereo channels. When reproduced, audio is decoded and output in 4 channel surround sound. This is the most common audio processing method for DVD-video.

The FM reception is poor. Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. If you connect the receiver to an outdoor antenna, ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe.

Outdoor FM antenna

Ground wire (not supplied)

To ground

Radio stations cannot be tuned in. Check that the antennas are connected securely. Adjust the antennas and connect an external antenna, if necessary. The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning (page 50). Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning). No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 50). RDS does not work.a) Make sure that you are tuned to an FM RDS station. Select a stronger FM station.
The RDS information that you want does not appear.a) Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order.

a) Models

If you are unable to remedy the problem using the troubleshooting guide
Clearing the receivers memory may remedy the problem (page 25). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.
of area code CEL, CEK only.
If the problem persist Remote control
The remote does not function. For receiver operation, you can only use the DISPLAY button when the TUNER input is selected. Point the remote at the remote sensor on the receiver. Remove any obstacles in the path between the remote and the receiver. Replace all the batteries in the remote with new ones, if they are weak. Make sure you select the correct input on the remote. Consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained.
Reference sections for clearing the receivers memory

Sony Full HD Blu-ray Matching 5.1-channel Audio Systems HT-SF2300, HT-SS2300 and HT-IS100

HT-SF2300

Hong Kong, July 11, 2008 - Sony takes high definition home entertainment to a new level with the launch of the Full HD Blu-ray matching 5.1-channel audio system series, including the HTSF2300, HT-SS2300 and HT-IS100. Combining the latest technologies with stylish designs, these three new models are specially created to match Blu-ray Disc players, PLAYSTATION3 and other high-definition sources for a true Full HD experience. The HT-SF2300 and HT-SS2300 are 5.1-channel home theatre systems that deliver a powerful audio output of 1000W from five stylishly designed speakers and a subwoofer. In addition to multi-channel linear PCM, both models integrate Dolby Digital, Dolby ProLogicII and DTS Decoding to bring stunning sound effects for a superb home theatre experience. The breathtaking sound effects are complemented by amazing picture quality. Both models reproduce life-like images in vivid colours and the most natural tones thanks to x.v.Colour, which enables realisation of a wider range of colours at approximately twice that of conventional standards (sRGB). Using three HDMI inputs with repeater functionality to connect to a BRAVIA LCD TV and Blu-ray disc player, the systems can upscale standard DVDs to 1080p resolution and give them superb colour, sharpness and visual impact on the screen of any sizes.
Home theatre enthusiasts will appreciate the world standard 24fps output created by the 24p True Cinema mode, which brings the movie-like picture quality to home when the system is connected to a movie source such as the Blu-ray disc player. Sonys Digital Cinema Auto Calibration (DCAC) simplifies surround sound setup with an included microphone to automatically adjust speaker frequency, distance and level. The systems can play back music stored on portable audio devices when using the Digital Media Port with various optional accessories, including the optional cradle for iPod players (TDM-iP10), Network Walkman player audio cradle and Bluetooth adapter. The Portable Audio Enhancer (plus) improves the clarity and depth of digital audio devices connected to the systems by adding information to the audio signal that had been removed during compression. HT-IS100 Sony understands that space is often at a premium in modern homes. Designed with five incredibly small speakers roughly the size of a golf ball, the new 5.1 channel system HT-IS100 delivers a rich surround sound experience that can be easily integrated into a home theater. With 450 watts (RMS) of power, the system includes a subwoofer with integrated 32-bit S-Master digital amplifier for superb audio performance. The HT-IS100 includes three 1080p HDMI inputs with repeater functionality and support for eight channels of uncompressed audio. It is an ideal complement for Sony Blu-ray disc players and PLAYSTATION3. Sony Full HD Blu-ray matching 5.1-channel audio systems HT-SF2300, HT-SS2300 and HTIS100 are now available at HK$3,980, HK$3,080 and $4,880 respectively. The 5.1ch theatre stand system RHT-G900 is also a member of the Blu-ray matching audio system line-up. Currently available at HK$6,980, the RHT-G900 is designed to match the 46-inch and 42-inch LCD TV for the ultimate Full HD home theatre entertainment. For customer enquiries, please contact Sony 24-hour customer service hotline at (852) 2345-2966.
- Walkman is a registered trademark of Sony Corporation. - iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Other trademarks or registered trademarks belong to their respective owners.

About Hong Kong Marketing Company Hong Kong Marketing Company (HKMC), a division of Sony Corporation of Hong Kong Limited, provides sales, marketing and after sales services for Sonys consumer electronics products as well as broadcast and professional products in Hong Kong and Macau. For more information on Sonys products and services, please visit its web site on www.sony.com.hk.
Specifications of Full HD Blu-ray Matching 5.1ch Audio Systems HT-SF2300 & HT-SS2300:
Model Main Features S-Master Full Digital Amplifier Digital Cinema Auto Calibration (DCAC) Power Output x.v.Colour 24p True Cinema Digital Cinema Sound (DCS) Digital Media Port (DM Port) BRAVIA Sync* A/V Sync Function Radio Preset Decoding Formats Terminals Input

32-bit Silver Grade

HT-SS2300
143W x5 + 285W x1; Total: 1000W (RMS 10% THD) Yes Yes Cinema Studio EX A/B/C Yes Yes Yes 60 Radio Stations (FM30/AM30) LPCM (2 Ch./5.1 Ch.), Dolby Digital, Dolby PROLOGIC II, DTS, Dolby Dual Mono Audio (Line In + Auto Audio (Line In + Auto Calibration Microphone x1) x3, Calibration Microphone x1) x3, Optical x2, Coaxial x1, HDMI Optical x2, Coaxial x1, HDMI x3, x3, Audio x3, DM Port x1 DM Port x1 HDMI x1
Output Speakers Front Speaker Centre Speaker Surround Speaker Subwoofer Speaker
Bass Reflex Speaker System; Built-in 6.5cm Speaker Unit; Speaker Cable Length: 4.5m x2 Bass Reflex Speaker System; Built-in 3x6 cm Speaker Unit; Speaker Cable Length: 3m x1 Bass Reflex Speaker System; Built-in 6.5cm Speaker Unit; Speaker Cable Length: 12m x2 Bass Reflex Speaker System; Built-in 16cm Speaker Unit; Speaker Cable Length: 3.5m x1
426 x 66.7 x 333 mm 3.7 kg 102 x 163 x 77 mm 0.55 kg 380 x 50 x 64 mm 0.38 kg 220 x 395 x 325 mm 5.9 kg
Dimensions (W x H x D) & Weight (with stand) Dimensions Main Body Weight Front Speaker Centre Speaker Subwoofer Dimensions Weight Dimensions Weight Dimensions Weight
315 x 1015-1345 x 315 mm 3.5 kg
*for selected BRAVIA LCD TV series of 2008 only
Specifications of Full HD Blu-ray Matching 5.1ch Audio System HT-IS100:
Model Main Features Digital Wireless Transmission Technology S-Master Full Digital Amplifier Digital Cinema Auto Calibration (DCAC) Power Output x.v.Colour 24p True Cinema Digital Media Port (DM Port) BRAVIA Sync* Omni-Directional Sound Mode Radio Preset Decoding Formats Terminals Input Output Speakers Front/Centre/Surround Speaker Subwoofer Speaker Dimensions (W x H x D) & Weight Front/Centre/Surround Speaker Subwoofer Speaker Remote Commander Receiver Dimensions Weight Dimensions Weight Dimensions Weight 45 x 55 x 40 mm 0.07 kg 238 x 441 x 434 mm 14.5 kg 46 x 19 x 45 mm 0.15 kg