100BCO.fm Page 1 Thursday, March 18, 2010 1:28 PM
010COV.fm Page 1 Thursday, March 18, 2010 1:27 PM

4-168-148-E5(1)

Award to goods or services which meet the environmental requirements of the EU ecolabelling scheme

LCD Digital Colour TV

Operating Instructions
Start-up Guide i-MANUAL Additional Information

ES-CAT/022/002

At Sony we are constantly rethinking and redesigning in order to create innovative digital entertainment products. And we are also constantly rethinking and re-evaluating our products, processes and our potential impact on the planet. Thanks to our results in that direction, this product achieved the European Eco label award issued by the European Comission. You can get more information in following link: http://ec.europa.eu/environment/ecolabel/
Sony gives a minimum of 2 years guarantee for this LCD TV and 7 years availability for replacement of electronic parts.
For useful information about Sony products
KDL-46EX4xx / KDL-40BX4xx / KDL-40EX4xx / KDL-40EX6XX / KDL-40NX5xx / KDL-37EX4xx / KDL-32BX3xx / KDL-32BX4xx / KDL-32EX3xx / KDL-32EX4xx / KDL-32EX6xx / KDL-32NX5xx / KDL-26EX3xx / KDL-22EX3xx
2010 Sony Corporation 4-168-148-E5(1)

xxxxx/xxxxx

020REG.fm Page 2 Thursday, March 18, 2010 1:29 PM

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

Trademark information

is a registered trademark of the DVB Project HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. BRAVIA and are trademarks of Sony Corporation. XMB and XrossMediaBar are trademarks of Sony Corporation and Sony Computer Entertainment Inc.
Notice for Digital TV function
Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG-2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business. This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed. Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers. For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/DVBC/ The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
About the model name in this manual
The xx that appears on the model name, corresponds to two numeric digits related to design or colour variation.

The illustrations used in this manual are of the KDL32EX402 unless otherwise stated.
Location of the identification label
Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV.
010COVTOC.fm Page 3 Tuesday, January 12, 2010 6:58 PM

Table of Contents

Start-up Guide 4
Safety information....9 Precautions.....10 i-MANUAL....11 Overview of the remote...12 Overview of the TV buttons and indicators...14

Watching TV

Watching TV....15 Using the Digital Electronic Programme Guide (EPG)..17 Using the Digital Favourite list....18

Using Optional Equipment

Connecting optional equipment...19 Viewing pictures from connected equipment..20 Playing Back Photo/Music/Video via USB...21 Using BRAVIA Sync with Control for HDMI...22

Using MENU Functions

Navigating through TV Home Menu on XMB..23 Settings....24

Additional Information

Installing the Accessories (Wall-Mount Bracket)..33 Specifications....36 Troubleshooting....39
: for digital channels only
Before operating the TV, please read Safety Information 9. Retain this manual for future reference. Full operating instructions can be found on the screen. Instructions about Installing Wall Mount Bracket are included within this TVs instructions manual.
030STU.fm Page 4 Tuesday, January 12, 2010 10:16 AM
Start-up Guide 1: Checking the accessories
Mains lead (1) (only for KDL-46EX4xx) Cable holder (1) (only for KDL-40/32NX5xx) Stand (1)* Screws for stand (4) (only for KDL-46EX4xx) Screws for stand (4 + 3) (only for KDL-40BX4/EX4xx, KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4xx, KDL26EX3xx, KDL-22EX3xx) Screws for stand (4 + 4) (only for KDL-40/32EX6xx, KDL-40/32NX5xx) Remote RM-ED022 (1) Remote RM-ED036 (1) (only for KDL-40/32EX6xx) Size AAA batteries (2)
* Disassembled except for KDL-46EX4xx.

2: Attaching the stand

Follow the assembling steps required to place on a TV stand.
Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. Place the TV set on the stand. Take care not to interfere with cables.
To insert batteries into the remote
(only for KDL-40/32EX6xx)
Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws.
Observe the correct polarity when inserting batteries. Do not use different types of batteries together or mix old and new batteries. Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

Programme Sorting (Only in analogue mode): Changes the order in which the analogue channels are stored on the TV.
1 Press F/f to select the channel you want to move to a new position, then press g. 2 Press F/f to select the new position for your channel, then press. If you do not change the order in which the analogue channels are stored on the TV, press HOME to go to next step.
This step will not appear if any analogue channel is found.
If the country/region which you want to use on the TV does not appear in the list, select - instead of a country/region.
Press F/f to select the location type in which you will operate the TV, then press.
The message "Set-up complete" will appear on the screen. Press. The TV has now tuned in all the available channels.
z System Update You can update the TV system using USB memory. Obtain information from the website below. http://support.sony-europe.com/TV/
In Shop mode, some settings will be periodically reset for Shop usage. This option selects the initial picture mode appropriate for the typical lighting condition in these environments.
To tune the TV for Cable connection
Press F/f to select Quick Scan or Full Scan, then press.
"Quick Scan" : channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for "Frequency" and "Network ID" is "Auto". This option is recommended for fast tuning when supported by your cable operator. If the "Quick Scan" does not tune, please use the "Full Scan" method below. "Full Scan" : All available channels are tuned and stored. This procedure may take some time. This option is recommended when "Quick Scan" is not supported by your cable provider. For further information about supported cable providers, refer to support web site: http://support.sony-europe.com/TV/DVBC

7: Auto-tuning the TV

Press.
Press F/f to select Antenna or Cable, then press.
If you select Cable, the screen for selecting the scan type appears. See z (page 7). The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not
Press G/g/f to select Start.
The TV starts searching for channels. Do not press any buttons on the TV or remote.
Some cable providers do not support Quick Scan. If no channels are detected using Quick Scan, perform Full Scan.
030STU.fm Page 8 Thursday, March 18, 2010 1:48 PM
Adjusting the viewing angle of the TV
This TV can be adjusted within the angles shown below. (only for KDL-40/32NX5xx)

When not in use

If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons. As the TV set is not disconnected from the mains when the TV set is just turned off, pull the plug from the mains to disconnect the TV set completely. However, some TV sets may have features that require the TV set to be left in standby to work correctly.

Ventilation

Never cover the ventilation holes or insert anything in the cabinet.
W:\PRODUCCIO\NOVIEMBRE 2009\4000 AZ1N papel\4-168-148E2(1)\040SAF.fm
040SAF.fm Page 10 Thursday, December 10, 2009 11:56 AM

For children

Do not allow children to climb on the TV set. Keep small accessories out of the reach of children, so that they are not mistakenly swallowed.
If the following problems occur.
Turn off the TV set and unplug the mains lead immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel.
Mains lead is damaged. Poor fitting of mains socket. TV set is damaged by being dropped, hit or having something thrown at it. Any liquid or solid object falls through openings in the cabinet.
To remove dust from the screen surface/ cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. Do not spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts, and may cause a malfunction. Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material. Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation. When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.
product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

LCD Screen

Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction. Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged. If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises. Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments. The screen and cabinet get warm when this TV set is in use. This is not a malfunction. The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal.

Disposal of the TV set

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this
Handling and cleaning the screen surface/cabinet of the TV set
Be sure to unplug the mains lead connected to the TV set from mains socket before cleaning. To avoid material degradation or screen coating degradation, observe the following precautions.
W:\PRODUCCIO\ENERO 2010\4056 AZ1N RC\4-168-148E3(1)\4168148E3\04aINS.fm
04aINS.fm Page 11 Thursday, February 11, 2010 2:22 PM

i-MANUAL

Displays the instruction manual on the screen.
Navigating through the Instruction Manual
1 Press i-MANUAL. 2 Press F/f to select topic from the Table of Contents, then press.
Use the corresponding coloured button to go to next or previous page and to return to Table of Contents. If the explanation is linked to other topic, the symbol will appear. Press F/f/G/g to select then press. Press RETURN to go back.

3 Press

RETURN to exit.
The XMB (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen.
050OVR.fm Page 12 Monday, January 11, 2010 11:57 AM

Overview of the remote

1 "/1 TV standby

Turns the TV on and off from standby mode. ~ Depending on the model you may also have an additional power button on the rear of the Remote Commander.
Screen mode (page 16) Digital Favourite list
Press to display the Digital Favourite list that you have specified (page 18).

Info/Text reveal

In digital mode: Displays brief details of the programme currently being watched. In analogue mode: Displays information such as current channel number and screen format. In Text mode (page 16): Reveals hidden information (e.g. answers to a quiz).

F/f/G/g/

Enables you to access various viewing options and change/make adjustments according to the source and screen format.

6 OPTIONS (page 16, 21)

7 HOME (page 23) 8 Coloured buttons (page 16, 18) 9 Number buttons
In TV mode: Selects channels. For channel numbers 10 and above, press the second and third digit in quick succession. In Text mode: Enters the three digit page number to select the page.

Subtitle setting

Press to change the subtitle language (page 30) (in digital mode only).

qa AUDIO

Press to change the dual sound mode (page 25).

qs PROG +//

) page.
In TV mode: Selects the next (+) or previous (-) channel. In Text mode (page 16): Selects the next ( ) or previous (
qd 2 +/ Volume qf % Mute the sound qg / Text (page 16) qh RETURN /
Returns to the previous screen of any displayed menu.

qj GUIDE /

EPG (Digital Electronic Programme Guide) (page 17)
qk DIGITAL Digital mode (page 15) ANALOG Analogue mode (page 15) ql SCENE Scene Select (page 16) w; i-MANUAL
Displays contents of Instruction Manual on the screen.
050OVR.fm Page 13 Thursday, December 17, 2009 10:16 AM
wa BRAVIA Sync m/N/M/./x/>: You can operate the BRAVIA Synccompatible equipment that is connected to the TV. SYNC MENU: Displays the menu of connected HDMI equipment. While viewing other input screens or TV programmes, HDMI Device Selection is displayed when the button is pressed. THEATRE: You can set Theatre Mode to on or off. When Theatre Mode is set to on, the optimum sound quality (if the TV is connected with an audio system using an HDMI cable) and picture quality for film-based contents are automatically set. ~
If you turn the TV off, Theatre Mode is also turned off. When you change the Scene Select setting, Theatre Mode turns off automatically. Control for HDMI (BRAVIA Sync) is only available with the connected Sony equipment that has the BRAVIA Sync or BRAVIA Theatre Sync logo or is compatible with Control for HDMI.

(Input select)

In TV mode: Press to display a list of inputs. z The number 5, PROG + and AUDIO buttons have tactile dots. Use the tactile dots as references when operating the TV.
050OVR.fm Page 14 Thursday, December 10, 2009 11:56 AM
Overview of the TV buttons and indicators
Turns the TV on or off. ~
To disconnect the TV completely, pull the plug from the mains. When you turn on the TV, the power indicator lights in green.

2 PROG +//

In TV mode: Selects the next (+) or previous (-) channel. In TV menu: Moves through the options up ( ) or down ( ).
In TV mode: Increases (+) or decreases (-) the volume. In TV menu: Moves through the options right ( ) or left ( ).

Input select / OK

In TV mode: Selects the input source from equipment connected to the TV sockets (page 20). In TV menu: Selects the menu or option, and confirms the setting.

(page 23)

Do not put anything over the sensor, doing so may affect its function (page 26).

6 Light sensor

7 Remote control sensor
Receives IR signals from the remote. Do not put anything over the sensor, as its function may be affected.
Picture Off / Sleep Timer indicator
Lights up in green when the picture is switched off (page 26). Lights up in orange when the sleep timer is set (page 26).

Standby indicator

Lights up in red when the TV is in standby mode.

0 " Power indicator

Lights up in green when the TV is turned on. ~
Make sure that the TV is completely turned off before unplugging the mains lead. Unplugging the mains lead while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction.
060WAT.fm Page 15 Thursday, December 10, 2009 11:57 AM

Watching TV Watching TV

Press 1 on the side of the TV to turn on the TV.
When the TV is in standby mode (the 1 (standby) indicator on the TV front panel is red), press "/1 on the remote to turn on the TV.
Press DIGITAL/ANALOG to switch between digital and analogue modes.

The channels available vary depending on the mode.
Press the number buttons or PROG +/ to select a TV channel.
To select channel numbers 10 and above using the number buttons, press the second and third digits in quick succession. To select a digital channel using the Digital Electronic Programme Guide (EPG), see page 17. In digital mode An information banner appears briefly. The following icons may be indicated on the banner.
: Radio service : Scrambled/Subscription service : Multiple audio languages available : Subtitles available : Subtitles available for the hearing impaired : Recommended minimum age for current programme (from 4 to 18 years) : Parental Lock : Digital Programme Lock

Additional operations

Do this
Press 2 + (increase)/ (decrease). Press. To select an analogue channel, press F/f, then press. Press. For details, see page 18. Adjust the volume
Access the Programme index table (in analogue mode only) Access the Digital Favourites (in digital mode only)
060WAT.fm Page 16 Thursday, December 10, 2009 11:57 AM

To access Text

Press /. Each time you press /, the display changes cyclically as follows: Text t Text over the TV picture (mix mode) t No Text (exit the Text service) To select a page, press the number buttons or /. To reveal hidden information, press.
z When four coloured items appear at the bottom of the Text page, Fastext is available. Fastext allows you to access pages quickly and easily. Press the corresponding coloured button to access the page.
Wide Stretches a 4:3 picture horizontally, to fill a 16:9 screen. Zoom* Displays cinemascopic (letter box format) broadcasts in the correct proportions. 14/9* Displays 14:9 broadcasts in the correct proportions. As a result, black border areas are visible on the screen. Subtitle* Displays cinemascopic (letter box format) broadcasts with subtitles on the screen.
Screen Format is set to Auto, automatically changes the screen format to suit the broadcast signal. * Parts of the top and bottom of the picture may be cut off.

Scene Select mode

When you select the desired scene option, the optimum sound quality and picture quality for the selected scene are automatically set.
Press SCENE on the remote control. Press F/f/G/g to select the mode, then press.
Cinema: Delivers a theatre-like picture and sound. Sports: Delivers a realistic picture with surround sound. Photo: Delivers a picture that reproduces the texture and colour of a printed photo. Game: Delivers a picture that lets you enjoy gameplaying to the fullest with the best picture and sound quality. Graphics: Delivers picture scenes that ease your prolonged monitor viewing experience and reduce fatigue by displaying clearer detailed pictures. General: Current user settings. Auto HDMI: The optimum sound quality and picture quality are automatically set according to the input source, though there may not be any effect depending on the connected devices.

Press HOME to display the XMB.

Media Category Bar

Category Object Bar
Press G/g to select the category.

Media category icon

Settings Photo Music Video Digital Analogue External Inputs
You can make advanced settings and adjustments (page 24). You can enjoy photo files via USB devices (page 21).
You can enjoy music files via USB devices (page 21). You can enjoy video files via USB devices (page 21). You can select a digital channel, Digital Favourite list (page 18) and the Digital Electronic Programme Guide (EPG) (page 17). You can select an analogue channel or Analogue Favourite list (page 18). You can select equipment connected to the TV. To assign a label to an external input, see AV Preset (page 28).
3 Press F/f to select the item, then press 4 Follow the instructions on the screen. 5 Press RETURN to exit. ~
The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed.
080MEN.fm Page 24 Thursday, December 10, 2009 11:57 AM

Settings

System Update
You can update the TV system using USB memory. Obtain information from the website below. http://support.sony-europe.com/TV/

Instruction Manual

Displays contents of Instruction Manual on the screen. Use coloured buttons to move through the screens. Press F/f/G/g to select , then press to go to related item or access real application.

Picture

Picture Mode
Selects the picture mode. Vivid: For enhanced picture contrast and sharpness. Standard: For standard picture. Recommended for home entertainment.
"Picture Mode" is set depending on "Scene Select" settings. "Vivid" and "Standard" are available when "General" is selected in "Scene Select" mode.

Backlight

Adjusts the brightness of the backlight.
Reducing the brightness of the screen, the power consumption will be reduced.

Depending on the country/region selected for Country, this option may not be available.
Channel 1 Press F/f to select Channel, then press. 2 Press F/f to select S (for cable channels) or C (for terrestrial channels), then press g. 3 Tune the channels as follows: If you do not know the channel number (frequency)
Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number.
to jump to Confirm, then press
Repeat the procedure above to preset other channels manually.
Label Assigns a name of your choice, up to five letters or numbers, to the selected channel.
Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting Off.
Audio Filter is not available when System is set to L.
Skip Skips unused analogue channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) Confirm Saves changes made to the Manual Programme Preset settings.
080MEN.fm Page 30 Thursday, December 10, 2009 11:57 AM
Programme Sorting (Only in analogue mode): Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press g. 2 Press F/f to select the new position for your channel, then press. Intelligent Picture:
On with Indicator: Automatically reduces the picture noise. The signal level bar is displayed when the channel is changed or the display is changed from an input screen to a TV programme. On: Automatically reduces the picture noise. Off: Turns off the Intelligent Picture feature.

Digital Set-up

Digital Tuning Digital Auto Tuning: Tunes in the available digital channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. Press. Programme List Edit: Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV. 1 Press F/f to select the channel you want to remove or move to a new position.

Press the number buttons to enter the known three-digit programme number of the broadcast you want.
2 Remove or change the order of the digital channels as follows: To remove the digital channel
To change the order of the digital channels 3 Press
. After a confirmation message appears, press G to select Yes, then press
Press g, then press F/f to select the new position for the channel and press G.
When Cable is selected this function may not be available in some countries.
Digital Manual Tuning: Tunes the digital channels manually. 1 Press the number button to select the channel number you want to manually tune, then press F/f to tune the channel. 2 When the available channels are found, press to store programmes. Repeat the above procedure to manually tune other channels.
Not available for Cable connection.
Subtitle Set-up Subtitle Setting: When For Hard Of Hearing is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information). Primary Preferred Language: Selects preferred language which subtitles are displayed in. Secondary Preferred Language: Selects secondary preferred language which subtitles are displayed in.
080MEN.fm Page 31 Thursday, December 10, 2009 11:57 AM
Audio Set-up Audio Type: Switches to broadcast for the hearing impaired when For Hard Of Hearing is selected. Primary Preferred Language: Selects the preferred language used for a programme. Some digital channels may broadcast several audio languages for a programme. Secondary Preferred Language: Selects the secondary preferred language used for a programme. Some digital channels may broadcast several audio languages for a programme. Audio Description: Provides audio description (narration) of visual information if TV channels broadcast such information. Mixing Level: Adjusts the TV main audio and Audio Description output levels.
This option is only available when Audio Description is set to On.
MPEG Audio Level: Adjusts the MPEG audio sound level. Parental Lock Sets an age restriction for programmes. Any programme that exceeds the age restriction can only be watched after a PIN Code is entered correctly.

When "Cable" is selected this function may not be available in some countries.
Service Replacement: Select On to automatically change the channel when broadcaster changes transmission of the viewing programme to a different channel. CA Module Set-up
Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM) and a view card. See page 19 for the location of the (PCMCIA) socket.
090ADD.fm Page 33 Tuesday, January 12, 2010 6:40 PM
Additional Information Installing the Accessories (Wall-Mount Bracket)
To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the Wall-Mount Bracket SU-WL500 (KDL-46EX4xx, KDL40BX4/EX4/EX6/NX5xx, KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4/EX6/NX5xx) / SUWL100 (KDL-26EX3xx, KDL-22EX3xx) (sold separately). Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation. Refer to Detaching the Table-Top Stand from the TV (page 8).
Place the TV on the Table-Top Stand, when securing the Mounting Hook. KDL-46EX4xx KDL-40BX4/EX4/EX6/NX5xx KDL-37EX4xx KDL-32BX3/BX4/EX3/EX4/EX6/NX5xx Screw (+PSW6 16) Square hole KDL-26EX3xx KDL-22EX3xx Screw (+PSW4 12) Mounting Hook

Mounting Hook

Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TVs weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
090ADD.fm Page 34 Tuesday, January 12, 2010 6:40 PM
TV installation dimensions table
KDL-46EX4xx KDL-40BX4/EX4/EX6/NX5xx KDL-37EX4xx KDL-32BX3/BX4/EX3/EX4/EX6/NX5xx
Screen centre point KDL-26EX3xx KDL-22EX3xx

Screen centre point

Unit: cm Screen centre dimension C 8.4 12.2 12.2 12.2 13.3 14.0 17.2 17.2 17.2 18.5 9.7 13.3 Length for each mounting angle Angle (0) D 42.4 43.9 42.5 42.5 43.1 42.7 43.2 42.6 42.6 43.1 31.5 32.9 E 16.2 16.0 15.9 16.0 12.0 15.8 15.6 15.6 15.7 12.0 16.0 14.3 F 36.9 34.9 34.1 34.1 29.7 32.7 30.9 30.3 30.3 26.0 26.2 22.2 Angle (20) G 64.0 59.1 56.6 56.7 54.6 53.4 48.8 47.9 47.0 47.3 40.2 34.8 H 46.4 47.9 46.2 46.3 45.4 46.3 47.1 46.0 46.1 45.4 32.3 32.8

COMPONENT IN COMPONENT IN HDMI IN 1, 2, 3, 4
AV3 AV3 DIGITAL AUDIO OUT (OPTICAL) PC IN
PC Input (15 Dsub) (see page 38) G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/ R: 0.7 Vp-p, 75 ohms, H/V Sync: TTL level PC audio input (minijack) Headphones jack USB port CAM (Conditional Access Module) slot
Power and others Power Requirements Screen Size (measured diagonally) Display Resolution
220240 V AC, 50 Hz 46 inches / 40 inches / Approx. 117 cm Approx. 102 cm 37 inches / Approx. 94 cm 32 inches / Approx. 80 cm 26 inches / Approx. 66 cm 22 inches / Approx. 55 cm
1,920 dots (horizontal) 1,080 lines (vertical) (KDL-46EX4xx, KDL-40BX4/EX4/EX6/NX5xx, KDL37EX4xx, KDL-32BX4/EX4/EX6/NX5xx) 1,366 dots (horizontal) 768 lines (vertical) (KDL-32BX3/EX3xx, KDL-26EX3xx, KDL-22EX3xx) 110 W 75.0 W (KDL40EX6xx) 146 W 92 W (KDL40EX6xx) 95.0 W 73.0 W 61.0 W (KDL32EX6xx) 94 W 75 W (KDL32EX6xx) 52.0 W 39.0 W
Power in Home/ 142 W consumption Standard mode in Shop/ Vivid mode
090ADD.fm Page 37 Friday, January 29, 2010 4:37 PM

Model name

KDL46EX4xx

0.19 W 0.18 W 207 kWh

KDL40BX4/EX4/ EX6/NX5xx

KDL37EX4xx

KDL-32BX3/ KDLBX4/EX3/EX4/ 26EX3xx EX6/NX5xx

KDL22EX3xx

Standby Power Consumption*3 Off mode Power Consumption Average anual energy consumption*4
161 kWh 96 kWh (KDL40EX6xx)

139 kWh

107 kWh 85 kWh (KDL32EX6xx)

76 kWh

57 kWh
Dimensions (with stand) 112.7 x 71.1 x 29.4 cm (w h d) (Approx.)
102.3 x 66.5 x 92.1 x 59.9 x 31.0 cm (KDL- 25.1 cm 40NX5xx) 99.6 x 63.5 x 25.0 cm (KDL40BX4xx) 99.2 x 63.5 x 25.0 cm (KDL40EX4xx) 95.2 x 61.3 x 25.0 cm (KDL40EX6xx) 102.3 x 62.8 x 92.1 x 56.4 x 9.8 10.0 cm (KDL- cm 40NX5xx) 99.6 x 59.8 x 9.9 cm (KDL40BX4xx) 99.2 x 59.8 x 10.0 cm (KDL40EX4xx) 95.2 x 58.1 x 7.4 cm (KDL40EX6xx) 22.4 kg (KDL40NX5xx) 15.6 kg (KDL40BX4xx) 15.9 kg (KDL40EX4xx) 14.9 kg (KDL40EX6xx) 19.2 kg (KDL40NX5xx) 13.6 kg (KDL40BX4xx) 13.9 kg (KDL40EX4xx) 12.7 kg (KDL40EX6xx) 13.6 kg

LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
Sony KDL-32EX402 (KDL-32EX402AEP)

Price details:

Price excl. VAT: 430.21 Eco fees: 0.00 VAT 21 %: 90.34
PDF generated on: 9 June, 2011

Product details:

Product code: KDL-32EX402AEP EAN: 4905524653748 Manufacturer: Sony

520.55

* VAT included / Main specifications:
Product is discontinued. You can not order it anymore.

Display

Display resolution: Display diagonal: Full HD: HD-Ready: Aspect ratio: Screen format adjustments: Display brightness: Viewing angle, vertical: Viewing angle, horizontal: Comb filter: Progressive scan: Noise reduction: 1920 x 1080 pixels 32 " Y Y 16:9 16:cd/m 3D Y Black Analogue & Digital PAL, SECAM, NTSC DVB-T/DVB-C Y 20 W 1 Y Y Y 1 2

Colour

Colour of product:

TV tuner

Tuner type: Analog signal format system: DVB:
Built-in speakers: RMS rated power:

Connectivity

HDMI ports quantity: USB 2.0 ports quantity: Component video (YPbPr/YCbCr) in: Composite video in: Composite video out: HDCP: S-Video in: PC in (D-Sub): PC Audio in: RF ports quantity: SCART ports quantity:
Common interface (CI): RS-232 ports: Audio (L,R) in: Audio (L,R) out: Ethernet LAN (RJ-45) ports quantity: Speaker/ headphone/ line-out jack: CardBus PCMCIA slots quantity:
1 N Y Y Y Y Y 1000 pages -

Networking

Wireless LAN (WLAN) connection:

Management features

Electronic Programme Guide (EPG): On/Off timer: Sleep timer: Integrated clock: Picture in Picture: Handheld remote control:

Teletext

Teletext function: Teletext:

Security

Child lock:

Ergonomics

Compatible with VESA-wall mounting system: 200 x 200 mm

Energy management

Power consumption: Power consumption (standby): AC (power) in: 73 W 0.19 W Y Y 800 x 97 x 497 mm 9500 g 800 x 220 x 532 mm 11000 g Power Y TFT 2 Y

Certificates

Plug and Play:

Weight & dimensions

Dimensions W x D x H: Weight: Dimensions (W x D x H) with stand: Weight with stand:

Illumination/Alarms

Power LED: Stand-by LED:

Technical details

Display: Speakers: Game mode:
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.