4-133-407-12(1)

12V AC power adaptor (1)

Setup Guide

GIGA JUKE Multi-room Package

HDD Network Audio System

Power cord (1) The supplied power cord comes with an attached clamp filter. This power cord is designed for exclusive use with the NAS-C5E only.
For models except the UK model For the UK model
Connecting the speakers and antennas
Internet Radio service on GIGA JUKE Wireless Player leaflet (1)
Wireless station and its supplied accessories
Wireless station WAP-NA1 (1) Wireless station stand (1) Network (LAN) cable (1)

NAS-SC500PK

2009 Sony Corporation Printed in Malaysia
Checking the supplied accessories
Wireless adaptor UWA-NA1 (1) Wireless adaptor extension cable (1)

5V AC power adaptor (1)

Power cord (1)
GIGA JUKE Music Server and its supplied accessories
GIGA JUKE Music Server NAS-S500HDE (1)
Other supplied accessories
The following accessories are for common use with all the devices in the package
Operating Instructions (1) This manual provides full explanations of the various settings, operations and the network connection procedure. This manual also contains precautions for the safe use of the unit. Setup Guide (this manual)
Attach the speaker pads (supplied) to the bottom corners of the speakers to stabilize the speakers and to prevent them from slipping.

WARNING

DO NOT plug the power cord into a wall outlet until the following steps to are completed.

Speaker codes (2)

Speaker pads (8)

AM loop antenna (1)

Speaker cords can be replaced with other cords of your choice (see How to detach the speaker cords from the speaker connectors)
Before setting up the units
Do the following operations before setting up the units.
Connect the speaker cords to the speakers and the unit.
On the speakers On the unit
Connect the speaker cords to the speakers. Connect the speaker cords to the unit.
Insert batteries into the remote control
For GIGA JUKE Music Server
Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted. Make sure the connectors at the end of the speaker cords are correctly aligned with the projections in the SPEAKER terminals on the unit, and then insert the connectors into the terminals.
Insert the red-line end to the + terminal.

FM wire antenna (1)

DAB wire antenna (1) Remote control (1) (for the UK model only)
Slide and remove the battery compartment lid. Insert two R6 (size AA) batteries ( end first) matching the polarities.
Make sure that the speaker cords are firmly connected to the +/ terminals on the speakers and to the SPEAKER terminals on the unit.
For GIGA JUKE Wireless Player
When the remote control is no longer able to operate the unit, replace both batteries with new ones.
Connect the AM loop antenna.
On the unit To ensure good reception, keep the antenna away from the unit or any other nearby metal or electrical devices (such as AV equipment).
R6 (size AA) batteries (2)
Oval attachments for WALKMAN (2) For details on the WALKMAN models that are compatible with each oval attachment for WALKMAN and on installing the oval attachment for WALKMAN onto the unit, refer to the Operating Instructions. Type A attachment Type B attachment

Prepare the Wireless Station

Operation mode switch

Attach the stand (supplied) to the wireless station.
The operation mode switch is factory set to AUTO.
Connect the FM wire antenna.
On the unit When using an external antenna

External antenna

CD-ROM containing the Music Transfer PC software (1) Do not play this disc on an audio CD player.
The attachment type (A or B) is indicated on the bottom of the attachment.
When using the unit in an area with poor reception, connect an external antenna with a commercially available 75 coaxial cable.
GIGA JUKE Wireless Player and its supplied accessories
GIGA JUKE Wireless Player NAS-C5E (1) Remote control (1) R6 (size AA) batteries (2)
How to detach the speaker cords from the speaker connectors If you want to use a different set of speaker cords, you can remove the cords from the speaker connectors. You can use any commercially available speaker cords of gauge AWG #18 - AWG #24. Before attaching a new speaker cord, strip off 10 mm of its insulation and twist the bare wires.
Push the tab on the speaker connector in the direction of the arrow and pull out the speaker cord.
Connect the DAB antenna (for the UK model only).

DAB wire antenna

With a commercially available DAB external antenna, you can enjoy more robust DAB reception. It is recommended that you use the supplied DAB wire antenna in areas with strong reception only. 75 coaxial cable with an F male type connector will be needed to install a DAB external antenna.
Connecting the supplied devices over a wireless network (Instant (S-IWS) connection)

Wireless adaptor

Connecting to the Internet and your computer (AOSS connection)
Set the Operation mode switch on the wireless station to MODE 2.
Broadband router Computer
If you want to use the devices in conjunction with your computer or use the Music Transfer software, the AOSS connection is recommended. Connecting the devices supplied in this package over a wireless network through Instant (S-IWS)*1 connection allows you to listen audio data stored on the GIGA JUKE Music Server through the speakers of the GIGA JUKE Wireless Player in a different room.

Wireless station

When connecting the devices to the Internet together with a computer, the AOSS connection is recommended as it can obtain a security level higher than that of the Instant (S-IWS) connection. Please note that using the Instant (S-IWS) connection may lower the security level of your home network.
*1Instant (S-IWS) (Sony Instant Wireless Audio Setup) is a function that automatically sets up a wireless network and connects the devices when they are turned on. Note

Instant (S-IWS) connection is recommended when the network consists only of the devices supplied with the NAS-SC500PK. If you want to set up the wireless network using a method other than Instant (S-IWS), see Connecting to the Internet and your computer (AOSS connection) on the right or refer to the Network connection and setup on page 98 in the Operating Instructions.
GIGA JUKE Music Server GIGA JUKE Wireless Player Wireless adaptor
Operation mode switch (MODE 2)
Connect the network (LAN) cable (supplied with the wireless station) to the INTERNET port of the wireless station and a broadband router. Perform the AOSS setup operation on the GIGA JUKE Music Server.
Press SETTINGS. Press / to select [Network setting] [Manual setting] [Wireless LAN setting] [Access point setting] [Automatic setting: AOSS], and then press ENTER. Follow the instructions that appear in the display.
Turn on the wireless station.
Operation mode switch (AUTO) POWER indicator
Perform the AOSS setup operation on the GIGA JUKE Wireless Player.
Press SETTINGS. Press / to select [Network setting] [Manual setting] [Connection setting] [AOSS], and then press ENTER. Follow the instructions that appear in the display.
Make sure that the operation mode switch on the wireless station is set to AUTO (factory setting). Use the 5V AC power adaptor (supplied with the wireless station) to connect the wireless station to a wall outlet. Confirm that the POWER indicator is lit.
Wait until the INSTANT indicator lights up and the AOSS indicator turns off. (This may take several minutes.)

GIGA JUKE Music Server

To the INTERNET port
GIGA JUKE Wireless Player
INSTANT indicator AOSS indicator

To a wall outlet

Connect the GIGA JUKE Music Server and the wireless station.
To a wall outlet To the USB port
Connect the wireless adaptor to the USB port on the GIGA JUKE Music Server using the wireless adaptor extension cable (supplied with the GIGA JUKE Music Server). Connect the power cord of the GIGA JUKE Music Server to a wall outlet.
The GIGA JUKE Music Server automatically turns on, makes the initial settings, and then turns off. (This may take several minutes.) When the clock setting display appears, set the clock (refer to Setting the clock on page 29 in the Operating Instructions).

Note Do not disconnect the power cord while the initial setup is in progress. Doing so may cause the GIGA JUKE Music Server to malfunction.

Troubleshooting

If the Instant (S-IWS) connection is not possible (Wireless LAN Instant (S-IWS) Connected. does not appear in the network setting display of the GIGA JUKE Music Server); or If the GIGA JUKE Wireless Player cannot connect with the GIGA JUKE Music Server (the name of your GIGA JUKE Music Server does not appear in the server selection display of the GIGA JUKE Wireless Player).
Do the following operation.
If the GIGA JUKE Music Server or the GIGA JUKE Wireless Player cannot connect to the Internet.
1 Disconnect the 5V AC power adaptor from the wireless station, and then set the operation mode
Press (power) to turn on the GIGA JUKE Music Server.

(power)

GIGA JUKE Music Server
When the connection has completed, a pop-up window appears in the top left part of the display to show the network connection status.
Tip The language displayed on the screen depends on the language that is set on the GIGA JUKE Music Server. For details on the display language setting, refer to the Operating Instructions.
1 Disconnect the 5V AC power adaptor from the wireless station, and then check the operation mode
switch on the wireless station is set to AUTO. If the network (LAN) cable (supplied with the wireless station) is connected to the wireless station, disconnect it. starts flashing.
2 Reconnect the 5V AC power adaptor to the wireless station and wait until the WIRELESS indicator 3 Press and hold the RESET button for about 5 seconds using something with a pointed tip, such as a
small pin, and then wait until the INSTANT indicator lights up and the AOSS indicator turns off (this may take several minutes). If this does not occur on the wireless station, press the RESET button again.
switch on the wireless station. When performing the Instant (S-IWS) connection: Set the operation mode switch to AUTO. When performing the AOSS connection: Set the operation mode switch to MODE 2. If the network (LAN) cable (supplied with the wireless station) is connected to the wireless station, disconnect it. the wireless station). When connecting the wireless station and a broadband router, connect the network (LAN) cable to the INTERNET port on the wireless station (see the figures in Connecting to the Internet and your computer (AOSS connection) above). starts flashing.
2 Connect the wireless station to the broadband router with the network (LAN) cable (supplied with
Connect the GIGA JUKE Wireless Player and the wireless station.
Use the 12V AC power adaptor (supplied with the GIGA JUKE Wireless Player) to connect the GIGA JUKE Wireless Player to a wall outlet.
When the clock setting display appears, set the clock (refer to Setting the clock on page 31 in the Operating Instructions).

4 If a network (LAN) cable is connected to the GIGA JUKE Music Server, disconnect it. 5 Connect the wireless adaptor to the USB port of the GIGA JUKE Music Server. 6 On the GIGA JUKE Music Server, perform the Instant (S-IWS) connection.
3 Reconnect the 5V AC power adaptor to the wireless station and wait until the WIRELESS indicator 4 Press and hold the RESET button for about 5 seconds using something with a pointed tip, such as a
Press (power) to turn on the GIGA JUKE Wireless Player.
Tip The language displayed on the screen depends on the language that is set on the GIGA JUKE Wireless Player. For details on the display language setting, refer to the Operating Instructions.

To a wall outlet

Press SETTINGS, press / to select [Network setting] [Auto setting], and then press ENTER. Or, press SETTINGS, press / to select [Network setting] [Manual setting] [Wireless LAN setting] [Access point setting] [Automatic setting: Instant (S-IWS)] and then press ENTER. Press SETTINGS, press / to select [Network setting] [Auto setting], and then press ENTER. Or, Press SETTINGS, press / to select [Network setting] [Manual setting] [Connection setting] [Instant (S-IWS)], and then press ENTER.
7 On the GIGA JUKE Wireless Player, perform the Instant (S-IWS) connection.
5 If a network (LAN) cable is connected to the GIGA JUKE Music Server, disconnect it. 6 Connect the wireless adaptor to the USB port of the GIGA JUKE Music Server. 7 When performing the Instant (S-IWS) connection:

To the DC IN 12V jack

GIGA JUKE Wireless Player
When Instant (S-IWS) setting with wireless station is completed. appears, press / to select [OK] and press ENTER.
The name of the GIGA JUKE Music Server (e.g., NAS-S500HDE) appears in the server selection display. If the name of the GIGA JUKE Music Server does not appear, press to select [Update info] and press ENTER.
On the GIGA JUKE Music Server, press SETTINGS, press / to select [Network setting] [Auto setting], and then press ENTER. Or, press SETTINGS, press / to select [Network setting] [Manual setting] [Wireless LAN setting] [Access point setting] [Automatic setting: Instant (S-IWS)], and then press ENTER. Do step in Connecting to the Internet and your computer (AOSS connection) (see above). On the GIGA JUKE Wireless Player, press SETTINGS, press / to select [Network setting] [Auto setting], and then press ENTER. Or, press SETTINGS, press / to select [Network setting] [Manual setting] [Connection setting] [Instant (S-IWS)], and then press ENTER. Do step in Connecting to the Internet and your computer (AOSS connection) (see above).

When performing the AOSS connection:
8 When performing the Instant (S-IWS) connection:
This completes the connection of the devices in the package. To use these devices in conjunction with the Internet but without connecting to your computer, do the following:

Network (LAN) cable

When performing an AOSS connection:
Connect one end of the network (LAN) cable (supplied with the wireless station) to the INTERNET port of the wireless station. Connect the other end of the network (LAN) cable to the broadband router that is connected to the Internet.

To the Broadband router

For more information, refer to the items on the right.

Broadband router

See the Operating Instructions for full explanations of the various settings, operations, functions and troubleshooting for the GIGA JUKE Music Server, the GIGA JUKE Wireless Player and the wireless station. Go to the customer support site of Sony Europe, http://support.sony-europe.com/ (for customers in Europe only).