Reviews & Opinions
Independent and trusted. Read before buy Sony NWZ-E355!

Sony NWZ-E355

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony NWZ-E355About Sony NWZ-E355
Here you can find all about Sony NWZ-E355 like review and other informations. For example: manual.

Sony NWZ-E355 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony NWZ-E355 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony NWZ-E355 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
rf131 4:56am on Wednesday, October 27th, 2010 
I love this walkman. It has everything of an Ipod and more. Day one, brought a 4g iPod Nano ($229 NZD). Took it back the next day, why, iTunes. Next day Philips GoGear Vibe ($149 NZD), took it back.
kbrown 2:03pm on Saturday, October 2nd, 2010 
The Sony Walkman NWZ-A815 2 GB one thing about it is that you have to slide a "button" in a very small hole to allow the player to clip into the holde...
ralf.liebenow 6:59am on Friday, September 3rd, 2010 
I love this walkman. It has everything of an ...  1. Hi quality audio drivers make it sound batter than new gen Ipods 1. Day one, brought a 4g iPod Nano ($229 NZD). T...  Menu navigation is simple and intuitive. Sound quality is Sony at its best.
lingenfr 4:28pm on Thursday, August 26th, 2010 
Great Sony product I have had this player for 2 and a bit years, the Sony quality is starting to show. OK. I was very pleased with my Sony MP3 on the music side but had problems loading video. Pretty good Bought this to replace my iPod about 6 months ago and its a nice little mp3.
akbigdog 4:44pm on Thursday, June 24th, 2010 
The Sony Walkman NWZ-A815 2 GB one thing about it is that you have to slide a "button" in a very small hole to allow the player to clip into the holde... Sony Walkman NWZ-A815 2 GB is a stylish mp3 player from Sony Physical Features * Weight:1.9 oz * Dimensions (W x D x H):1.7 in x 0.4 in x 3.
dbridenbaugh 6:00pm on Tuesday, June 15th, 2010 
This tiny little mp4 is great value for money! Its 4Gb capacity is fine for a few hundred songs as well as pictures AND movies. Easy-to-brake, while this feature from Sony shows strenghtness, meanwhile stays elegant. I must say that I enjoy watching movies with it.
brockrwood 4:06am on Tuesday, April 6th, 2010 
My neighbour bought a new iPod Nano. I tried it out and was impressed with it. But then,I bought a Black Slimline Sony NWZ-A818 8gb. Bought an iPod Classic 80gb.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Supplied Items
Three Ways to Transfer Music
From CDs, etc., using Windows Media Player
How to Install the Bundled Software (User Guide included)

How to Use the Player

BACK/HOME button OPTION/PWR OFF button 5-way button

Quick Start Guide

How to Install the Bundled Software How to Use the Player
Please check the items in the package. Headphones (1) USB cable (1) Quick Start Guide (this manual) Software The software is stored in the built-in flash memory of the player, and includes the following items: Content Transfer WALKMAN Guide User Guide, etc. For details on how to install, refer to How to Install the Bundled Software (User Guide included).
1 Connect the player to your computer.

How to use the Home menu

The Home menu appears when you press and hold the BACK/HOME button. The Home menu is the starting point to play audio, search for songs, changing settings, etc. From the Home menu, you can select the desired item on the screen by using the 5way button.

Home menu

FM Radio SensMe Channels Playlists
You can start the WALKMAN Guide and Content Transfer from the [start] menu (displayed by clicking [start]). If you delete the [Setup.exe] file and [Install] folder in the player by formatting the builtin flash memory of the player, copy this data from the [Backup] folder on the computer to your player. Then connecting the player to the computer to be installed, follow the above procedure from step 1 to install. The backup data is preserved in the following [C] drive on your computer by the default install setting. C:\Program Files\Sony\WALKMAN Guide\NWZ-E350\Backup
From iTunes*1, etc., using Content Transfer

USB cable (supplied)

Photos Music

Videos

2 Select the following order with the computer. 3 Double-click [Setup.exe].
Select [start] - [My Computer] or [Computer] - [WALKMAN] [Storage Media].
What can you do with the WALKMAN Guide ?
The WALKMAN Guide includes the following items: User Guide The following contents can be viewed in your web browser. Details on how to use the player How to use software to transfer content to the player Troubleshooting Customer Registration Link Customer Support Link Other useful Links Includes link information, etc., on the download site. The bundled items differ depending on the country/region of purchase.

NWZ-E353/E354/E355

2010 Sony Corporation Printed in Malaysia
About Windows Operating System and Windows Media Player
Make sure that the OS is Windows XP (Service Pack 3 or later), Windows Vista*1 (Service Pack 1 or later) or Windows 7*1, and the installed Windows Media Player version on your computer is 11 (Windows XP/Windows Vista) or 12 (Windows 7). For details about usage or support on Windows Media Player, refer to Windows Media Player information from the following web site: http://support.microsoft.com/
*1 [Compatibility mode] for Windows XP is not supported.

Charging the Battery

The players battery is recharged while the player is connected to a running computer.

Confirm.

Settings
Go to song playback screen Podcasts
*1 Content Transfer supports data transfer from iTunes 9.0 to the player.
By drag-and-drop using Windows Explorer

About the manuals

In addition to this Quick Start Guide, this model is accompanied by the User Guide (HTML document) which you can view from the WALKMAN Guide. For details, refer to How to Install the Bundled Software (User Guide included).
4 Follow the on-screen instructions.
For details on transferring music, videos, photos or podcasts, refer to the User Guide. The User Guide can be readily viewed from the WALKMAN Guide.
The install wizard appears. When you execute [Setup.exe], the [Setup.exe] file and [Install] folder stored in the [Storage Media] folder of the player are copied to your computer for backup, and WALKMAN Guide and Content Transfer are installed to your computer.
Charging About 3 hours Fully-charged
Return to the previous screen.

Charging.

5 Double-click
After executing [Setup.exe], the WALKMAN Guide shortcut appears on the desktop of your computer. With the player connected to your computer, when installation of bundled software is completed, Content Transfer starts automatically.
After executing [Setup.exe] you can use the free space in the [Storage Media] folder more effectively by formatting the built-in flash memory of the player. To format the built-in flash memory of the player, see To initialize (format) the player on the backside.

Turning the Player On and Off
To turn on To turn off Press any button. Press and hold the OPTION/PWR OFF button.
(WALKMAN Guide) on the desktop to start the WALKMAN Guide.
For details on transferring music, etc., refer to the User Guide included in the WALKMAN Guide.

Parts and Controls

BACK/HOME button 5-way button*1
(play/pause/confirm) button / buttons / buttons

Troubleshooting

If the player does not function as expected, try the following steps to resolve the issue.
1 Find the symptoms of the issue in Troubleshooting in the
User Guide (HTML document), and try any corrective actions listed.
For details on connecting to a computer, see the tables on the right. You may be able to resolve some issues by charging the battery.
Headphone jack USB connector
2 Connect the player to your computer to charge the battery. 3 Press the RESET button with a

small pin, etc.

RESET button
Connect the USB cable (supplied).
Display VOL +*1/ button OPTION/PWR OFF button HOLD switch Strap hole RESET button

Use a small pin, etc.

Press to display the option menu. If you press and hold the OPTION/PWR OFF button, the screen turns off and the player enters standby mode.
4 Check information on the issue in
the Help of each software. support Web sites.
If you press the RESET button while operating the player, stored data and player settings may be lost.
5 Look up information on the issue on one of the customer 6 If the approaches listed above fail to resolve the issue,
consult your nearest Sony dealer.
About the customer support Web sites, see For the latest information.
*1 There are tactile dots. Use them to help with button operations.
Symptom Cause/Remedy The player cannot charge The USB cable is not connected to a USB connector the battery. on your computer properly. Disconnect the USB cable, and then reconnect it. Use the supplied USB cable. The battery is charged in an ambient temperature out of the range of 5 C (41 F) to 35 C (95 F). icon You cannot charge the battery when appears. Charge the battery in an ambient temperature of 5 C (41 F) to 35 C (95 F). The computer is not on. Turn on the computer. Your computer has entered Sleep or Hibernation status. Release the computer from Sleep or Hibernation status. A USB hub is being used. Connecting the player via a USB hub may not work. Connect the player to your computer using the USB cable (supplied). The operating system installed on the computer is not supported by the player. To charge the player, connect the player to a computer with the operating system that is supported by the player. You have not used the player for more than a year. Depending on the conditions under which your player is used, the battery may have been deteriorated. Consult your nearest Sony dealer. [Connected USB. The The USB cable is not connected to a USB connector player cannot be on your computer properly. operated.] or [Connected Disconnect the USB cable, and then reconnect it. USB (MTP). The player Use the supplied USB cable. cannot be operated.] A USB hub is being used. does not appear when Connecting the player via a USB hub may not connected to the work. Connect the player directly to your computer computer with the USB using the USB cable (supplied). cable (supplied) (The The USB connector on your computer may have a problem. computer does not recognize the player). Connect the player to another USB connector on your computer.

Symptom [Connected USB. The player cannot be operated.] or [Connected USB (MTP). The player cannot be operated.] does not appear when connected to the computer with the USB cable (supplied) (The computer does not recognize the player). (Continued)
The player becomes unstable while it is connected to the computer. When double-clicking [Setup.exe] to install the bundled software, [Setup.exe] does not execute, and the Properties window opens.
Cause/Remedy When you use the player for the first time, or when the battery is low, it may take the player about 30 seconds to display the message after connected to a computer. This is not a malfunction. The software authentication may be performed and it may take rather a long time. Wait for a while. The software installation has been failed. Reinstall the software by using the installer. The imported data will remain untouched. The computer is running another software other than the one used for transferring. Disconnect the USB cable, wait a few minutes, and reconnect it. If the problem persists, disconnect the USB cable, restart the computer, and then reconnect the USB cable. [Connected USB. The player cannot be operated.] or [Connected USB (MTP). The player cannot be operated.] may not appear on the player, depending on the software environment that is running on your computer. Activate Windows Media Player, or Windows Explorer. A USB hub or USB extension cable is being used. Connecting the player via a USB hub or extension cable may not work. Connect the player directly to your computer using the USB cable (supplied). Install the bundled software after installing Windows Media Player 11 or 12. For details on Windows Media Player, refer to the following web site: http://support.microsoft.com/

Precautions

To initialize (format) the player
You can format the built-in flash memory of the player. If the memory is formatted, all files including the User Guide (HTML document) will be erased and all setting values returned to their defaults. Be sure to verify the files stored in memory prior to formatting, and then export any necessary files to the hard disk of your computer or other device beforehand. About the headphones

Avoid playing the unit at so loud a volume that extended play might affect your hearing. At a high volume outside sounds may become inaudible. Avoid listening to the unit in situations where hearing must not be impaired, for example, while driving or cycling. As the supplied headphones are of open-air design, sounds go out through the headphones. Remember not to disturb those close to you.
For the latest information
If you have any questions or issues with this product, or would like information on compatible items with this product, visit the following web sites. For customers in the USA: http://www.sony.com/walkmansupport For customers in Canada: http://www.sony.ca/ElectronicsSupport/ For customers in Europe: http://support.sony-europe.com/DNA For customers in Latin America: http://www.sony-latin.com/index.crp For customers in other countries/regions: http://www.sony-asia.com/support For customers who purchased the overseas models: http://www.sony.co.jp/overseas/support/
1 Press and hold the BACK/HOME button until the Home

menu appears.

Owners Record

2 Select

[Settings] [Common Settings] [Reset/ Format] [Format] [Yes] [Yes] in this order.
Press the /// button to select the item, and then press the button to confirm. When initialization finishes, [Memory formatted.] appears.
The model and serial numbers are located on the back of the player. Record them in the space provided below. Refer to these numbers in the spaces whenever you call upon your Sony dealer regarding this product. Model No. __________________________ Serial No. __________________________
License and Trademark Notice
Refer to the User Guide (HTML document).
Do not format the built-in flash memory using Windows Explorer. If you format the built-in flash memory, format it on the player.

doc1

D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm
Description and location of parts

Front panel

qd qs qa
A ?/1 (on/standby) (page 34, 52, 58) B TONE, TONE MODE Press TONE MODE repeatedly to select BASS or TREBLE, then turn TONE to adjust the level. C SOUND OPTIMIZER (page 58) D AUTO VOL Adjust the volume automatically depending on the input signal or content from the connected equipment (ADVANCED AUTO VOLUME function). This function is useful, for example, when the sound of a commercial is louder than the TV programs. Notes Be sure to reduce the volume level before you turn off this function. As this function is available only when Dolby Digital, DTS or Linear PCM signals are input, the sound may suddenly increase when you switch to other formats. This function does not work in the following cases. Linear PCM signals with a sampling frequency of more than 48 kHz are being received. Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received.
E Display panel (page 10) F Remote control sensor Receives signals from remote control. G INPUT SELECTOR (page 44, 50, 62) H INPUT MODE (page 62) I MASTER VOLUME (page 43) J VIDEO 2 IN jacks (page 30) K iPhone/iPod terminals (page 29) Connects the (USB) port and the video jack to output audio/video from iPhone/iPod. L (USB) port (page 32) M AUTO CAL MIC jack (page 37) N DISPLAY (page 80) O DIMMER Adjusts the brightness of the display panel in 3 levels. P 2CH/A.DIRECT, A.F.D., MOVIE (HD-D.C.S.), MUSIC (page 54, 56) Q TUNING MODE, MEMORY/ENTER, TUNING Press to operate a tuner (FM/AM). Turn TUNING to scan a station. R SPEAKERS (page 36) S PHONES jack (page 87)
Indicators on the display panel

LH SW RH L SL C S R SR

D + EX True HD NEO:6 USB ANALOG HDMI COAXOPT ARC PL II x z D.L.L. EQ RDS MEM DTS - HD MSTR HI RES LBR LFE A.P.M. D.RANGE ST DTS - ES LPCM SLEEP

ZONE 2 BI - AMP SP A B

SB L SB SB R

ql qk qj

A SW Lights up when the audio signal is output from the SUBWOOFER jack. B USB Lights up when iPhone/iPod or USB device is detected. C D.L.L. Lights up when the D.L.L. (Digital Legato Linear) function is activated. D Input indicator Lights up to indicate the current input. ANALOG No digital signal is being input. INPUT MODE is set to ANALOG. The A. DIRECT is being selected. HDMI The receiver recognizes the equipment connected via an HDMI IN jack. COAX Digital signal is input through the COAXIAL jack (page 62). OPT Digital signal is input through the OPTICAL jack (page 62). ARC TV input is selected and the Audio Return Channel (ARC) signals are detected. E Dolby Digital Surround indicator* Lights up the respective indicator when the receiver is decoding the corresponding Dolby Digital format signals. D D EX D+ TrueHD Dolby Digital Dolby Digital Surround EX Dolby Digital Plus Dolby TrueHD

HDMI features

A digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver. This signal supports Dolby Digital, DTS, and Linear PCM. For details, see Digital audio formats supported by the receiver (page 57). The receiver can receive Multi Channel Linear PCM (up to 8 channels) with a sampling frequency of 192 kHz or less with an HDMI connection. Analog video signals input to the receivers VIDEO jack or COMPONENT VIDEO jacks can be output as HDMI signals (page 31). Audio signals are not output from an HDMI TV OUT jack while the image is converted. This receiver supports High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), Deep Color (Deep Colour), x.v.Color (x.v.Colour) and 3D transmission.
All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. The receiver has a video conversion function. For details, see Function for conversion of video signals (page 31). When you connect the audio output jack of the TV to the TV IN jacks of the receiver to output the TV sound from the speakers connected to the receiver, set the sound output jack of the TV to Fixed if it can be switched between either Fixed or Variable.
Notes on HDMI connections
An audio signal input to the HDMI IN jack is output through the SPEAKERS terminals, HDMI TV OUT jack and PHONES jack. It is not output through any other audio jacks. Video signals input to the HDMI IN jack can only be output through the HDMI TV OUT jack. The video input signals cannot be output through the VIDEO OUT jacks or MONITOR OUT jacks.
The audio and video signals of HDMI input are not output from the HDMI TV OUT jack while the GUI menu is displayed. When you want to listen to the sound from the TV speaker, set the Audio Out to TV+AMP in the HDMI Settings menu (page 73). If you cannot play back multi channel audio source, set to AMP. However, the sound will not output through the TV speaker. DSD signals of Super Audio CD are not input and output. Be sure to turn the receiver on when the video and audio signals of a playback equipment are being output to a TV via the receiver. If you set the Pass Through to OFF, video and audio signals will not be transmitted when the power is turned off. Audio signals (format, sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected equipment. Check the setup of the connected equipment if the image is poor or the sound does not come out of the equipment connected via the HDMI cable. Sound may be interrupted when the sampling frequency, the number of channels or audio format of audio output signals from the playback equipment is switched. When the connected equipment is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may be lost. If this is the case, check the specification of the connected equipment. You can enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), Multi Channel Linear PCM only with an HDMI connection. Set the image resolution of the playback equipment to more than 720p/1080i to enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD). The image resolution of the playback equipment may need to be at certain settings before you can enjoy Multi Channel Linear PCM. Refer to the operating instructions of the playback equipment.

Before you perform Auto Calibration
Before you perform Auto Calibration, check the following items. Set up and connect the speakers (page 19, 21). Connect only the supplied optimizer microphone to the AUTO CAL MIC jack. Do not connect any other microphones to this jack. Set the SB Assign to BI-AMP in the Speaker Settings menu if you use bi-amplifier connection (page 65). Set the SB Assign to Speaker B in the Speaker Settings menu if you use speakers front B connection (page 35). Make sure the speaker output is not set to SPK OFF (page 36). Disconnect the headphones.

SP A B*

This setting is not available when headphones are connected.
Remove any obstacles in the path between the optimizer microphone and the speakers to avoid measurement errors. Get accurate measurement by making sure the environment is free from noise and quiet. Notes
The speakers emit very loud sound during the calibration and the volume cannot be adjusted. Provide consideration to your neighborhood and to the children in presence. If the muting function has been activated before you perform Auto Calibration, the muting function will shut off automatically. The correct measurements may not be able to take or Auto Calibration cannot be performed when special speakers, such as dipole speakers are used.
Select the speaker pattern (page 34).
If you connect front high speakers, select the speaker pattern that has front high speakers (5/x.x or 4/x.x) each time you perform Auto Calibration. Otherwise, the characteristics of the front high speakers cannot be measured.
Connect the supplied optimizer microphone to the AUTO CAL MIC jack. Set up the optimizer microphone.
Place the optimizer microphone at your seating position. Use a stool or tripod so that the optimizer microphone remains at the same height as your ears.
Setting up the Auto Calibration

Optimizer microphone

Confirm active subwoofer setup
When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer. Turn the LEVEL to just before the mid-point. If you connect a subwoofer with a crossover frequency function, set the value to maximum. If you connect a subwoofer with an auto standby function, set it to off (deactivated).
Example of using surround back speakers
Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the actual position.
Performing Auto Calibration
Press V/v repeatedly to select Auto Cal., then press or b.

Input buttons

Press B/b repeatedly to select Standard, then press.
The calibration type is automatically set to Engineer.

Press V/v repeatedly to select Auto Cal., then press or b. Press B/b repeatedly to select Custom, then press. Press V/v repeatedly to select the calibration type you want, then press.
Full Flat: Makes the measurement of frequency from each speaker flat. Engineer: Sets to the Sony listening room standard frequency characteristics. Front Reference: Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Off: Sets the Auto Calibration equalizer level to off.
Press to confirm the selected calibration type. Repeat steps 5 to 9 in Performing Auto Calibration (page 38).
Depending on the position of the subwoofer, the measurement results may vary. However, there will be no problems even if you continue to use the receiver with that value.
Guide to on-screen display operation
You can display the menu of the receiver on the TV screen and select the function you want to use on the TV screen by pressing V/v/B/b and on the remote control. To display the menu of the receiver on the TV screen, make sure that the receiver is in GUI MODE following the steps in To turn GUI MODE on and off (page 41).
Press V/v repeatedly to select a menu you want, then press or b to enter the menu.
The menu item list appears on the TV screen. Input. Example: When you select

RETURN/ EXIT O

TOOLS/ OPTIONS MENU
Press V/v repeatedly to select the menu item you want to adjust, then press to enter the menu item. Repeat steps 3 and 4 to select the parameter you want.

Using the menu

To return to the previous screen
Switch the input of the TV so that an image of the menu is displayed. Press GUI MODE.

To exit the menu

Press MENU.
To turn GUI MODE on and off
Press GUI MODE. GUI ON or GUI OFF appears on the display panel, depending on the mode selected.
Overview of the main menus
Menu icon Input Description Selects the input source equipment connected to the receiver (page 43). Selects the music from iPhone/iPod (page 46) or USB device (page 48). Selects the video from iPhone/iPod (page 46). Selects the built-in FM/AM radio (page 51). You can adjust the settings of the speakers, the surround effect, equalizer, audio and other inputs connected to the HDMI jacks (page 68).

Tuning to preset stations
Select FM FM or AM AM from the menu, then press or b. Select the preset station you want.
Preset numbers from 1 to 30 are available.

Receiving RDS broadcasts

(Europe, Australia and Taiwan models only)
This receiver allows you to use Radio Data System (RDS), which enables radio stations to send additional information along with the regular programming signal. This receiver offers convenient RDS features, such as Program Service name display. RDS is available only for FM stations.* Tuner Operations
* Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details.
Naming preset stations (Name Input)
On FM FM or AM AM screen, select the preset number which you want to name. Press TOOLS/OPTIONS.
Simply select a station on the FM band.
When you tune to a station that provides RDS services, RDS lights up and the Program Service name* appears on the TV screen and the display panel.
* If an RDS broadcast is not received, a Program Service name will not appear.
RDS may not work properly if the station you tuned to is not transmitting the RDS signal or if the signal strength is weak. Some letters that can be displayed on the TV screen cannot be displayed on the display panel.
While a Program Service name is displayed, you can check the frequency by pressing DISPLAY repeatedly (page 80).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm
You cannot select A. DIRECT when you select GAME and USB as input.
Selecting the sound field
This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receivers pre-programmed sound fields.

SOUND FIELD +/

Auto Format Direct (A.F.D.) mode
The Auto Format Direct (A.F.D.) mode allows you to listen to high fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound.
x A.F.D. AUTO (A.F.D. Auto)
Presets the sound as it was recorded/encoded without adding any surround effects. However, for USA and Canada models, this receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signals.
Press SOUND FIELD +/ repeatedly to select the sound field you want.
You can also use 2CH/A.DIRECT, A.F.D., MOVIE (HD-D.C.S.) or MUSIC on the receiver.
x MULTI ST. (Multi Stereo)
Outputs 2 channel left/right signals from all speakers. However, sound may not be output from certain speakers depending on the speaker settings.

2 channel sound mode

You can switch the output sound to 2 channel sound regardless of the recording formats of the software you are using, the playback equipment connected, or the sound field settings of the receiver.

Movie mode

You can take advantage of surround sound simply by selecting one of the receivers preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters into your home.

x 2CH ST. (2ch Stereo)

The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer. Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channel.
x A. DIRECT (Analog Direct)
You can switch the audio of the selected input to 2 channel analog input. This function enables you to enjoy high quality analog sources. When using this function, only the volume and front speaker level can be adjusted.

x HD-D.C.S.

HD Digital Cinema Sound (HD-D.C.S.) is Sonys new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on precise response measurement data of a mastering studio. With HD-D.C.S., you are able to enjoy Blu-ray and DVD movies at home with not only the high quality of sound, but also the best sound ambience, just as the movies sound engineer intended in the mastering process. You can select the effect type for HD-D.C.S. For details, see Surround Settings menu (page 71).

x HALL (Hall)

Reproduces the acoustics of a classical concert hall.

x JAZZ (Jazz Club)

Reproduces the acoustics of a jazz club.

x CONCERT (Live Concert)

Reproduces the acoustics of a 300-seat live house.

x STADIUM (Stadium)

Reproduces the feeling of a large open-air stadium.

x SPORTS (Sports)

Reproduces the feeling of sports broadcasting.

x PLII MV (PLII Movie)

Performs Dolby Pro Logic II Movie mode decoding. This setting is ideal for movies encoded in Dolby Surround. In addition, this mode can reproduce sound in 5.1 channel for watching videos of overdubbed or old movies.
x P. AUDIO (Portable Audio)
Reproduces a clear enhanced sound image from your portable audio device. This mode is ideal for MP3 and other compressed music.

x PLIIX MV (PLIIx Movie)

Performs Dolby Pro Logic IIx Movie mode decoding. This setting expands Dolby Pro Logic II Movie or Dolby Digital 5.1 to discrete 7.1 movie channels.

x PLII MS (PLII Music)

Perform Dolby Pro Logic II Music mode decoding. This setting is ideal for normal stereo sources such as CDs.

To turn off the surround effect for movie/music
Press SOUND FIELD +/ repeatedly to select 2CH ST. or A.F.D. AUTO. You can also press 2CH/A.DIRECT repeatedly on the receiver to select 2CH ST. or press A.F.D. repeatedly on the receiver to select A.F.D. AUTO.

Notes on sound fields

Depending on the speaker pattern settings, some sound fields may not be available. You cannot select PLIIx and PLIIz at the same time. PLIIx is available only when the speaker pattern is set to a setting with surround back speaker(s). PLIIz is available only when the speaker pattern is set to a setting with front high speakers.
Digital audio formats supported by the receiver
Digital audio formats that this receiver can decode depend on digital audio output jacks of the equipment connected. This receiver supports the following audio formats.
Audio format Dolby Digital Dolby Digital EX Dolby Digital Plus Dolby TrueHDa) DTS DTS-ES DTS 96/24 DTS-HD High Resolution Audioa) DTS-HD Master Audioa)b) Multi Channel Linear PCMa)
a) Audio signals are output in another format a)
Maximum number of channels 5.1 6.1 7.1 7.1 5.1 6.1 5.1 7.1 7.1 7.1
Connection between the playback equipment and the receiver COAXIAL/OPTICAL a a a a a HDMI a a a a a a a a a a
if the playback equipment does not correspond to the format. For details, refer to the operating instructions of the playback equipment. b) Signals with a sampling frequency of more than 96 kHz are played back at 96 kHz or 88.2 kHz.
Using the SOUND OPTIMIZER
The Sound Optimizer lets you enjoy clear and dynamic sound at low volume levels. It automatically calibrates the sound which cannot be heard well when you turn down the volume level. After Auto Calibration is performed, the sound level is optimized to suit your environment.

SOUND OPTIMIZER

Resetting sound fields to the default settings
Be sure to use the buttons on the receiver to perform this operation.
Press SOUND OPTIMIZER to select SOUND.OP. ON.
The Sound Optimizer function is activated. The Sound Optimizer is set to on and off as you press SOUND OPTIMIZER. Note
This function does not work when A. DIRECT is being used.
Press ?/1 to turn off the receiver. While holding down MUSIC, press ?/1.
S.F. CLEAR appears on the display panel and all sound fields are reset to their default setting.

What is BRAVIA Sync?

The BRAVIA Sync function allows communication between Sony products such as TV, Blu-ray Disc/DVD player, AV amplifier, etc. that supports the Control for HDMI function. By connecting Sony equipment that is compatible with the BRAVIA Sync with an HDMI cable (not supplied), operation is simplified as follows: One-Touch Play (page 60) System Audio Control (page 61) System Power-Off (page 61) Theater/Theatre Mode Sync (page 62) Scene Select (page 62) Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (HighDefinition Multimedia Interface). We recommend that you connect the receiver to products featuring BRAVIA Sync. Note

Select the menu item you want, then press.
Example: When you select Auto Cal.

Using the Settings menu

You can adjust various settings for speakers, surround effects, etc. using the Settings menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in GUI MODE by following the steps in To turn GUI MODE on and off (page 41).
Select the parameter you want, then press.

RETURN/ EXIT O MENU

Settings menu list
Settings menu Auto Cal. Description Sets the speaker level or distance and makes the measurement automatically (page 36). Sets the speaker position manually (page 69). Selects the sound field and adjusts the surround effect you choose (page 71). Adjusts the equalizer (bass/ treble sound) (page 72). Sets various sound items (page 72). Makes settings for sound/ images from equipment connected to the HDMI jacks (page 73). Makes settings for the system of the receiver (page 74).

Speaker Surround

Select Settings from the menu, then press or b to enter the menu mode.

EQ Audio HDMI

System

2 Select Lvl.

Speaker Settings menu
You can adjust each speaker manually. You can also adjust the speaker levels after the Auto Calibration is completed. Note
The speaker settings are only for the current seating position.
3 Set the level of the selected speaker,
then press. You can adjust the level from 10.0 dB to +10.0 dB in 0.5 dB intervals. Note
When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to Large. However, the sound will be output from the subwoofer if the digital input signal contains LFE signals. the front or surround speakers are set to Small. MULTI ST., PLII MV, PLII MS, PLIIX MV, PLIIX MS, HD-D.C.S. or P. AUDIO is selected.
x SP Pattern (Speaker Pattern)
Select SP Pattern according to the speaker system which you are using. Select the speaker pattern before you perform Auto Calibration.
x SB Assign (Surround back speaker assign)
Lets you set the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals for a bi-amplifier or speakers front B connection. Speaker B BI-AMP OFF Note
When you change the connection from a biamplifier or speakers front B to surround back or front high speakers connection, set the SB Assign to OFF, then set up the speakers again. See Using AUTO CALIBRATION (page 36) or Manual Setup (page 69).
To adjust the distance from the seating position to each speaker
You can adjust the distance from the seating position to each speaker (front left/right, front left/right high, center, surround left/right, surround back left/right, subwoofer).

This function is not available when Ctrl for HDMI is set to OFF. When AUTO is selected, it may take a little more time for the image and sound to be output to the TV than when ON is selected. When the receiver is in standby mode, A. STANDBY appears on the display panel if Pass Through is set to AUTO or ON. However, A. STANDBY will disappear when Pass Through is set to AUTO and no signals are detected.
x Dual Mono (Digital broadcast language selection)
Lets you select the language you want when you listen to the dual audio of a digital broadcast when available. This feature only functions for Dolby Digital sources. MAIN/SUB: Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. MAIN: Sound of the main language will be output. SUB: Sound of the sub language will be output.

HDMI Settings menu

You can make the required settings for equipment connected to the HDMI jack.
x Ctrl for HDMI (Control for HDMI)
Lets you turn the Control for HDMI function on or off. For details, see Preparing for the BRAVIA Sync (page 59). ON OFF Note
When you set Ctrl for HDMI to ON, Audio Out may be changed automatically.

x Audio Out

Lets you set the HDMI audio signals from the playback equipment connected to the receiver via an HDMI connection. AMP: The HDMI audio signals from the playback equipment is only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. Note
Audio signals are not output from the TVs speaker when Audio Out is set to AMP.
TV+AMP: The sound is output from TVs speaker and the speakers connected to the receiver. Notes
The sound quality of the playback equipment depends on the TVs sound quality, such as the number of channels, and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play back multi channel source. When you connect the receiver to an image display equipment (projector, etc.), sound may not be output from the receiver. In this case, select AMP. When you select the input that you have assigned the HDMI input, sound does not output from the TV.

Press ENT/MEM.

Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote control automatically exits the programming mode.
Repeat steps 1 to 4 to program other equipment.
The RM SET UP indicator turns off while a numeric button is pressed.

To control a CD player

Maker Code(s) 101, 102, 103 104, 123 105, 106, 107 108, 109, 110 111, SONY DENON JVC KENWOOD MAGNAVOX MARANTZ ONKYO PANASONIC PHILIPS PIONEER TECHNICS YAMAHA

To cancel programming

Press RM SET UP during any step. The remote control automatically exits the programming mode.
To activate the input after programming
Press the programmed button to activate the input you want.
112, 113, 115, 118, 119 120, 121, 122
If programming is unsuccessful, check the following:
If the RM SET UP indicator does not light up in step 1, the batteries are weak. Replace both batteries. If the RM SET UP indicator flashes 5 times in quick succession while entering the numeric code, an error has occurred. Start again from step 1.

To control a DAT deck

Maker SONY PIONEER Code(s) 203 219

To control a tape deck

Maker SONY DENON KENWOOD NAKAMICHI PANASONIC PHILIPS PIONEER TECHNICS YAMAHA Code(s) 201, 202 204, 205 206, 207, 208, 216 211, 212 213, 214 215, 216 217, 218

To control a DVD player

Maker SONY BROKSONIC DENON HITACHI JVC MITSUBISHI ORITRON PANASONIC PHILIPS PIONEER RCA SAMSUNG TOSHIBA ZENITH Code(s) 401, 402, 415, 417 406, 408, 409, 416, 422 404, 421 418, 420

To control an MD deck

Maker SONY DENON JVC KENWOOD Code(s) 303 304
To control a DVD recorder
Maker Code(s) 401, 402, 403 SONY
To control an HDD recorder
Maker SONY Code(s) 307, 308, 309
To control a DVD/VCR COMBO

Maker Code(s) 411 SONY

To control a Blu-ray Disc player/ recorder
Maker SONY PANASONIC SAMSUNG LG Code(s) 310, 311, 336 337
To control a DVD/HDD COMBO
Maker SONY Code(s) 401, 402, 403

To control a PSX

Maker SONY Code(s) 313, 314, 315

To control a TV

Maker SONY AIWA AKAI AOC CENTURION CORONADO CURTIS-MATHES DAYTRON DAEWOO FISHER FUNAI FUJITSU GOLDSTAR/LG GRUNDIG HITACHI Code(s) 501, 502 501, 536, 517 503, 551, 566, 567 517, 566 504, 505, 506, 507, 515, 544 508, 528 503, 512, 515, 517, 534, 544, 556, 568 511, 533, 534 503, 513, 514, 515, 517, 519, 544, 557, 571 521, 522 503, 510, 566 516, 503, 515, 517, 518, 544, 503, 519, 527, 544, 566, 568 503, 517, 520, 540, 544, 554, 566 530, 558 521, 522, 573, 575 509, 524, 553, 559, 572 515, 518, 557, 570, 571 503, 504, 514, 517, 518 509, 525, 526, 540, 551, 509, 535

When the receiver is in standby mode, there is no sound output from the TV. When the receiver enters into standby mode, sound is from the last HDMI component selection before you turned off the receiver. If you are enjoying other equipment, play the equipment and perform the One-Touch Play operation, or turn on the receiver to select the HDMI equipment you want to enjoy. Make sure Pass Through is set to ON in the HDMI Settings menu if you connect equipment not compatible with the BRAVIA Sync to the receiver (page 73). No sound is output from the receiver and TV speaker. Check the setting of Audio Out in the HDMI Settings menu (page 73). Check that the equipment is connected correctly to the HDMI jack for that equipment. You cannot listen to the Super Audio CD by connecting HDMI. Depending on the playback equipment, you may need to set up the HDMI setting of the equipment. Refer to the operating instructions supplied with each equipment. Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission. Sound may not be output from the receiver while the GUI appears on the TV screen. Press GUI MODE to select GUI OFF. Make sure the TV is compatible with the System Audio Control function. If the TV does not have System Audio Control function, set the Audio Out settings in HDMI Settings menu to TV+AMP if you want to listen to the sound from the TV speaker and receiver. AMP if you want to listen to the sound from the receiver.
When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, select AMP. If you cannot listen to the sound of the equipment connected to the receiver while TV input is selected on the receiver Be sure to change the input of the receiver to HDMI when you want to watch a program on the equipment connected via HDMI connection to the receiver. Change the TV channel when you want to watch a TV broadcast. Be sure to select the correct equipment or input you want when you watch a program from the equipment connected to the TV. Refer to the operating instructions of the TV on this operation. Recording cannot be carried out. Check that the equipment is connected correctly. Select the source equipment using the input buttons (page 43).

iPhone/iPod

Receiver
Radio stations cannot be tuned in. Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) and connect an external antenna (aerial), if necessary. The signal strength of the stations is too weak with automatic tuning. Use direct tuning. Make sure you set the tuning scale correctly (when tuning in AM stations with direct tuning) (page 52). No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations is used). Preset the stations (page 52). Press AMP, then press DISPLAY repeatedly on the remote control so that the frequency appears on the display panel. RDS does not work.* Make sure that you are tuned to an FM RDS station. Select a stronger FM station.
The sound is distorted. Press MASTER VOL or 2 on the remote control repeatedly. Set the EQ setting of the iPhone/iPod to Off or Flat. The iPhone/iPod cannot be charged. Check that the receiver is turned on. Make sure the iPhone/iPod is connected firmly. The iPhone/iPod cannot be operated. Check that you have removed the protect case of the iPhone/iPod. Depending on the contents of the iPhone/ iPod, it may take time to start playback. Disconnect the iPhone/iPod and connect the iPhone/iPod again. You are using an unsupported iPhone/ iPod. See Compatible iPod/iPhone models (page 45) for the supported device types. The ring volume of the iPhone does not change. Adjust the ring volume using the controls on the iPhone.

USB device

Are you using a supported USB device? If you connect an unsupported USB device, the following problems may occur. See Compatible USB devices (page 48) for the supported device types. The USB device is not recognized. File or folder names are not displayed on this receiver. Playback is not possible. The sound skips. There is noise. A distorted sound is output. There is noise, skipping, or distorted sound. Turn off the receiver and reconnect the USB device, then turn on the receiver. The music data itself contains noise, or the sound is distorted. The USB device cannot be connected into the (USB) port. The USB device is being connected backwards. Connect the USB device in the correct orientation. Reading is displayed for an extended time, or it takes a long time before playback starts. The reading process can take a long time in the following cases. There are many folders or files on the USB device. The file structure is extremely complex. The memory capacity is excessive. The internal memory is fragmented. Thus, we recommend following these guidelines. Total folders on USB device: 100 or less (including ROOT folder) Total files per folder: 100 or less.

 

Tags

Perfection 4180 Expedition-2006 Stratos DC912 37 24V511T Pc 900 MPK-THD DV-S555 HC1100 Taurus X Coffeemaker FT Audio Conditioners J ICD-MS1 XRS 9830 HQ7830 32WS23E LH-W751ta1 TDM-7581RB CT-27G5B VGN-B1VP Edition WA10R3 NX-G5 PC585 DX200 GTO75 2 Motorola I760 Explorer 360 HGS-12 2 0 TM-H5000II 5838-expressbake-bread-maker C1500 LMX25981ST KDL-40X2000 Singer 5050 HS20 2 Alan 443 DSK-8 GSA-H50N Xyron 2500 LE46M87BD Bissell 1672 S1500FD CSD-W330 DAV-DZ520K CLP-600 LX8000SA-25S Steam AR-C260 M Convertible Radiotelephone BMW 318 Manual S12AHN CDX-GT430IP WFF 1301 72720-W IC-V85 Elro C950 WS9611 Sable 1998 Argos CDR-HD1000 S8000FD LE08A SP-6-spartan VI Recorder KV-28FQ70E Parts List Stylus T20 CQ-C1301U CA 410 Car KIT 3055V HM121HI-BMS MDX-C5100 5-SUB Mk2 SE4351S IDW450 Mk2 26PF3320 Translator A55-S1063 OHH60-71116C Dimage G530 R-865 - 2006 7600 NAW RDR-VX525 Cabriolet EP-70 DC-ONE KP-53V90 Spotmatic SA-W3800 EC 150 7130V SF-505 HT-BD7200 DU-L77

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101