SCD-XA5400ES ES Super Audio CD Player w/HDMI Output

Index:

Key Features Detailed Features Specifications Weights & Measures Supplied Accessories Footnotes

See Larger Image

Key Features
Single SA-CD/CD Tray Multi-Channel Super Audio CD Playback Capability 2ch Super Audio CD Playback Capability Multi-Channel Direct Stream Digital Output via HDMI1

SCD-XA5400ES

Multi-Channel Direct Stream Digital Decoding

Detailed Features

Single SA-CD/CD Tray Multi-Channel Super Audio CD Playback Capability 2ch Super Audio CD Playback Capability Multi-Channel Direct Stream Digital Output via HDMI1 Multi-Channel Direct Stream Digital Decoding Discrete Laser/Optical Pick Up System with Dual Lasers Dual R-Core Power Transformers
Aluminum Front Panel Off-Center Insulator Feet Gold Plated Coaxial Digital Output for CD

Specifications

General
Tray Type: Tray Disc Capacity: Single

General Features

Transformers: Yes (x2) R-Core Transformer

Audio Features

CD Playback: Yes1 SA-CD Playback: Yes1

Convenience Features

HDMI Technology: No Insulator Feet: Yes (Off Center)
Digital-to-Analog Converter: Super Audio D/A Channel Power Rating: 5.1 Multi-Channel

Inputs and Outputs

Coaxial Audio Digital Output(s): 1 (Rear) Optical Audio Output(s): 1 (Rear) Multi-Channel Output(s): 1 (Rear) RCA Audio Output(s): 1 (Rear) IR Input(s): 1 (Rear) HD Component Video Input(s): 1 (Rear)
Power Consumption (in Operation): 15W
SCD-XA5400ES Power Requirements: AC 120V, 60Hz

Hardware

Remote Control: Yes

UPC Code

027242737075
Weights & Measurements
Weight (Approx.): 22.5 lbs (10.2 kg) Dimensions (Approx.): 16.9" x 4 3/4" x 16 1/10" (W430xH124xD390mm)

Supplied Accessories

- "Instruction Manual Remote Control AA Battery x 2"

Footnotes

1. Requires HDMI connector (sold separately). 2. 1080/60p requires HDMI connector (sold separately) and compatible HDTV with 1080/60p display capability, and 24p True Cinema requires 24p-capable HDTV. Upscaled image quality may vary. 3. When used with supporting video sources. 4. BRAVIA Sync for Theatre feature works with select Sony HDTVs and home theater products. Please refer to owners manual for compatibility. 5. DIGITAL MEDIA PORT and accessories required (sold separately). 6. Requires satellite radio subscription and radio antenna (both sold separately). Antenna placement restrictions apply. 7. Playback depends on recording conditions. Footnotes: *Requires component video cables (sold separately) and compatible HDTV. **Requires composite video cables (sold separately) and compatible HDTV. ***Requires composite audio cables (sold separately). May also require additional speakers (sold separately), based on desired configuration.
2008 Sony Electronics Inc. Sony, Walkman, BRAVIA, Remote Commander, and Digital Cinema SoundProLogic, Dolbyof Sony. xross Entertainment Inc. Dolby, Dolby Digital, are trademarks Digital mediaDolby TrueHD are registered trademarks of Sony Computer Plus, bar is a trademark of Sony Corporation and Dolby Laboratories. dts, dts High Resolution Audio, dts Master Audio is a trademark of Digital Theater Systems, L.P. iPod is a trademark of Apple Inc. All other trademarks are properties of their respective owners. Features and specifications are subject to change without notice. All Weights and Measures are Approximate. Last Updated: 11/02/2009 For the latest information and to update spec sheets please visit: www.sony.com/dealernetwork

SERVICE MANUAL

Ver. 1.0 2008.08

SCD-XA5400ES

US Model Canadian Model AEP Model
Model Name Using Similar Mechanism Mechanism Type Optical Pick-up Block Name
NEW CDM66F-DVBU101 KHM-313CAB

SPECIFICATIONS

When a Super Audio CD is played
Playing frequency range 2 Hz to 100 kHz Frequency response 2 Hz to 50 kHz (3 dB) Dynamic range 110 dB or more Total harmonic distortion rate 0.0012 % or less Wow and flutter Value of measurable limit (0.001 % W. PEAK) or less

Output jacks

Jack type Output level Load impedance

General

Laser Diode Properties Emission duration: Continuous Laser Output*: Less than 44.6 W * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Power requirements North America: 120 V AC, 60 Hz Europe: 230 V AC, 50/60 Hz Power consumption 25 W Power consumption (during standby mode) 0.5 W Dimensions (w/h/d) 390 mm (15 3/8 inch) incl. projecting parts Mass (approx.) 10.2 kg (22 lb 8 oz)
ANALOG Phono OUT UNjacks BALANCED ANALOG XLR OUT BALANCED HDMI DIGITAL OUT (CD) OPTICAL* HDMI Square optical output connector Coaxial output connector
2 Vrms (at 50 kilohms) 2 Vrms (at 50 kilohms) 18 dBm
Over 10 kilohms Over 600 ohms

When a CD is played

Frequency response 2 Hz to 20 kHz (0.5 dB) Dynamic range 100 dB or more Total harmonic distortion rate 0.0017 % or less Wow and flutter Value of measurable limit (0.001 % W. PEAK) or less
(Light emitting wave length: 660 nm) 75 ohms
DIGITAL OUT (CD) COAXIAL* PHONES

0.5 Vp-p

Stereo 5 mW phone jack

32 ohms

* Outputs only the audio signals of the CD

Supplied accessories

Audio connecting cord Remote commander AC power cord Battery Red and White plugs (1) RM-ASU042 (1) (1) R6 (size-AA) (2)
Design and specifications are subject to change without notice.

SUPER AUDIO CD PLAYER

9-889-205-01

2008H05-1 2008.08

Sony Corporation
Audio&Video Business Group Published by Sony Techno Create Corporation
NOTES ON CHIP COMPONENT REPLACEMENT Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat. FLEXIBLE CIRCUIT BOARD REPAIRING Keep the temperature of soldering iron around 270 C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering.
CAUTION Use of controls or adjustments or performance of procedures other than those specied herein may result in hazardous radiation exposure.
This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety check before releasing the set to the customer: Check the antenna terminals, metal trim, metallized knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes.). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The limit indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)
To Exposed Metal Parts on Set
SAFETY-RELATED COMPONET WARNING! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

Compatible Disc Types

You can play the following types of discs on this player. Super Audio CDs Audio CDs DSD Discs This player cannot play the following discs. CD-ROMs (MP3, JPEG, etc.) DVDs DTS-CDs DualDiscs, etc. If you try to play CD-ROMs/DVDs, the error message Cannot Play or No Disc will appear. For DTS-CDs/DualDiscs, refer to their respective notes below.
Music discs encoded with copyright protection technologies
This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.
Notes on CD-R/CD-RW playback
Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition, or the drives characteristics. Besides, the discs, which are not yet finalized at the end of recording, cannot be played back. In these cases, Reading will remain or Cannot Play will appear on the display.

Note on DTS-CDs

DTS signals are output from the DIGITAL OUT (CD) jacks only. The DTS signals must be decoded on a DTS-compliant digital device to be listened to.

Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

Note on DSD Discs

A DSD Disc is a disc recorded in the DSF file format. This player can play DSF files that you have recorded on DVD-ROM compatible DVD-R, DVD-RW, DVD+R and DVD+RW discs. For details on DSD Discs.

Part No.

Model US and Canadian models AEP model
Part No. 3-873-299-1[] 3-873-299-2[]
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF
BOTTOM VIEW cam (66) Pull out the tray in the direction of arrow.
Rotate the cam (66) with a tapering driver in the direction of arrow
MAIN BOARD SERVICE POSITION In checking the MAIN board, prepare jig (extension cable J-2501-102-A: 1 mm Pitch, 13 cores, Length 300 mm).
AUDIO board (CN151) MAIN board (CN1100) connect jig (extension cable J-2501-102-A) to MAIN board (CN501, CN1100) and AUDIO board (CN151, CN152).

AUDIO board (CN152)

insulator sheet Note: insert the insulator sheet to prevent short.

MAIN board (CN501)

PRECAUTION WHEN REMOVING OPTICAL PICK-UP BLOCK OR DMB-FIT BOARD
CAUTION Be sure to execute a solder bridge as a measure against static electricity when removing the optical pick-up or DMB-FIT board. (Otherwise, the OP block will be destroyed.)

BOTTOM VIEW

mechanism deck
SCD-XA5400ES SECTION 2 GENERAL

Front Panel

This section is extracted from instruction manual.
/ (power) switch Turns the power of the player on or off. To let the player enter power-saving mode (standby mode), press / (power) on the remote or on the player. TIME/TEXT button Switches the playing time of the track, the remaining time of the disc, or TEXT information on the display. MULTI/2CH button Selects the playback area when a disc with the 2channel area and the multi-channel area (page 8) is loaded. SA-CD/CD button Switches between the Super Audio CD layer and the CD layer of a hybrid disc.
HDMI button/lamp Sets whether the audio signal is output from the HDMI OUT jack or not. When the lamp is lit, sound is output from the HDMI OUT jack. When the lamp is not lit, sound is output from the ANALOG OUT jacks and DIGITAL OUT (CD) jacks. Disc tray Holds a disc. button Opens and closes the disc tray. button and lamp Plays a disc. The lamp lights up during playback.
button and lamp Pauses playback. The lamp lights up during playback pause. button Stops playback AMS dial (AMS: Automatic Music Sensor) Selects a track. Display window Displays information on the disc or current track. Remote sensor Receives the signal from the remote. PHONE LEVEL Adjusts the headphones volume. PHONES jack Connects the headphones.

Rear Panel

IR REMOTE IN jack Equipped on the models for the U.S. and Canada only. Connects an IR repeater. ANALOG OUT BALANCED L/R jacks Connects a component with XLR input jacks, such as stereo amplifiers, etc., using an XLR (balanced) cable (not supplied). HDMI PRIORITY MULTI/2CH switch When both multi-channel area and 2-channel area are recorded on a Super Audio CD layer, sets the area that is given priority to be played back. HDMI OUT jack Connects components with HDMI jacks, such as HDMI-compliant amplifiers, etc.
DIGITAL OUT (CD) COAXIAL jack Connects a component with the coaxial digital input jack, such an MD deck, etc. DIGITAL OUT (CD) OPTICAL jack Connects a component with the optical digital input jack, such an MD deck, etc. DIGITAL OUT (CD) ON/OFF switch Sets whether audio signals are output from the DIGITAL OUT (CD) jacks or not. AC IN jack Connects the supplied AC power cord (mains lead). ANALOG OUT UNBALANCED L/R jacks Connects a component with analog input jacks, such as stereo amplifiers, etc., using an audio connecting cord.

About the IR REMOTE jack

You can operate the player without pointing the remote toward the remote sensor of the player if you connect an IR repeater (not supplied) to the IR REMOTE jack. Use an IR repeater when you install the player in a place where signals from the remote cannot reach.

two screws (BVTP2.6 (3CR)) BOTTOM VIEW cam (66)

FRONT PANEL ASSY

two cushions wire (flat type) (19 core) (CN502)
two screws (BVTP3 8) two brackets (panel)
connector (CN291) connector (CN103)

six screws (BV/ring)

front panel assy

MAIN BOARD

connector (CN506, CN1201, CN1202)

six screws (BVTP3 8)

wire (flat type) (24 core) (CN1101) wire (flat type) (13 core) (CN1100)
MAIN board wire (flat type) (19 core) (CN502) wire (flat type) (13 core) (CN501)
two screws (BVTP3 8) screw (B3 6)
MECHANISM DECK (CDM66F-DVBU101)
three screws (BVTP3 8) connector (CN1201) wire (flat type) (24 core) (CN1101)
mechanism deck (CDM66F-DVBU101)

connector (CN010)

MOTOR BOARD, MOTOR (L) ASSY (LOADING)

belt (LD) gear (LD)

connector (CN012) cushion two claws

two screws (B2.6 4)

tray (66F)
motor (L) assy (loading) Remove two solders. MOTOR board

BASE UNIT BLOCK

cam (66)

base unit block

floating screw (DIA.12)
SCD-XA5400ES SECTION 4 TEST MODE
Note 1: According to the following procedures when you ship it (Return it to the customer). 1. SERVICE MODE of step 6 and 7 (DVD EEPROM clearness) 2. COLD RESET Note 2: DVD displayed by the test mode shows "super audio CD.
COLD RESET The cold reset clears data stored in microcomputers RAM to initial conditions. Procedure: 1. Press three buttons of [x], [A] and [?/1] on the set simultaneously. 2. COLD RESET appears on the uorescent indicator tube. After that, the uorescent indicator tube becomes blank then the system becomes standby states. PANEL TEST Procedure: 1. Press the [?/1] button to turn on. 2. Press three buttons of [x], [. AMS >, PUSH ENTER] and [?/1] on the set simultaneously. 3. All segments turned on. 4. When [x] button on the set is pressed after half segments in uorescent indicator tube light up. If you press [x] button on the set again, another half segments in uorescent indicator tube light up. Pressing [x] button on the set again would cause all segments in uorescent indicator tube light up. 5. Press [N] button on the set, in the key check mode, the uorescent indicator tube displays K0 J0. 6. Each time an another button is pressed, KEY value increases. However, once a button is pressed, it is no longer taken into account. When all keys are pressed correctly, K10 and OK are alternately displayed. 7. When the [. AMS >, PUSH ENTER] dial on the set is turned in the direction of right,J0 is changed to J1, then. J9. When the [. AMS >, PUSH ENTER] dial on the set is turned in the direction of left, J0 is changed to J9, then. J0. 8. To release from this mode, press three buttons in the same manner as step 1.

[Next]Next page [Prev]Prev page [0]Return to Top Menu
SCD-XA5400ES SECTION 5 ELECTRICAL ADJUSTMENT
To Execute the Initialize Setup Data Procedure: 1. Press the [MENU] button on the remote commander and then press the [CLEAR] button on the remote commander. The following screen appears on the on-screen display. Emg. History Check Laser Hours CD 999h 59min DVD 999h 59min Initialize setup data. When the base unit is replaced, perform the adjustment and the measurement as shown below in this order. EXECUTING IOP MEASUREMENT (See page 14)
[Next]Next page [Prev]Prev page [0]Return to Top Menu 2. The screen after a while returns to former display. To Return to the Top Menu of Remocon Diagnosis Menu Press the [0] button on the remote commander. 5. Checking Version Information To check the version information, please follow the following procedure. Procedure: 1. From the top menu of Remocon Diagnosis Menu, select 4. Version Information by pressing the [4] button on the remote commander. The following screen appears on the on-screen display. Version information Firm(Main): Ver. X.XXXX Firm(Sub): XX.XX RISC: XXXXXX 8032: XXXXXX Audio DSP: XX.XX.XX.XX Servo DSP: XX.XX.XX.XX

[0]Return to Top Menu

2. To return to the top menu of Remocon Diagnosis Menu, press the [0] on the remote commander.
SCD-XA5400ES SECTION 6 DIAGRAMS
6-1. BLOCK DIAGRAM - SA-CD/CD SERVO Section -

10 DVDRFIP

R-ch is omitted due to same as L-ch. SIGNAL PATH : SA-CD PLAY : CD PLAY (ANALOG) : CD PLAY (DIGITAL)

VOA/A VOB/B VOC/C VOD/D

DVDA DVDB DVDC DVDD
VOE/E+G VOF/F+H OPTICAL PICK-UP BLOCK (KHM-313CAB) LIMIT VC LD (780) AUTO POWER CONTROL (FOR CD) Q1102-1
17 TNI 18 TPI NA NB MC MD SPDIF 215 RF AMP, SERVO DSP, HDMI TRANSMITTER IC1101 (1/2)
LEVEL SHIFT IC1702 LEVEL SHIFT IC1703 OPTICAL TRANSMITTER IC1701
COAXIAL DIGITAL OUT(CD) OPTICAL
53 LIMIT SW 28 V2O 22 LDO1

ABCK ALRCK KMOD ASDATA3

PD AUTO POWER CONTROL (FOR SA-CD) Q1102-2

MULTIPLEXER IC1901

PBCK PLRCK SBCK PDT
PDT, BDTR, PBCK, PLRCK, SBCK

BLOCK DIAGRAM - MAIN Section PDT, BDTR, PBCK, PLRCK, SBCK

(Page 17)

PDT BDTR SWITCHING IC206

5 PDATA 1 DSDL 2 DSDR

IOUTR+ 17 IOUTR- 18

BUFFER IC253

LOW-PASS FILTER IC255

J252 R

PBCK PLRCK SBCK INVERTER IC292
4 PBCK 6 PLRCK D/A CONVERTER IC202 IOUTL+ 25 IOUTL- 26 BUFFER IC203 LOW-PASS FILTER IC205 RELAY DRIVE Q252, 253 RY3 J202 L

D-FLIP FLOP IC155

ANALOG OUT UNBALANCED

(Page 18)

27M 7 SCK
COUNTER IC156 X151 22.5792MHz CLOCK BUFFER IC152

3 AB CK

RELAY DRIVE Q202, 203 RY202 J251 R J201 L BUFFER IC204
CLOCK GENERATOR ICREF CLKP 15 SCL SDA

MS MDI MDO RST

RELAY DRIVE Q201, 204 RELAY CONTROL Q151, 293 LINE AMP IC291 RY201
RV801 PHONE LEVEL J801 PHONES
R-ch is omitted due to same as L-ch. SIGNAL PATH : SA-CD
-2 AC_DET 85 DAC_CS2 DAC_CS1 DAC_DATA DAC_CLK DAC_INT

(Page 20)

PLL_IC_ISC_SCL PLL_IC_I2C_SDA

6 XAMUTE

19 ASDMUTE
SYSTEM CONTROLLER IC501 (3/4)
BLOCK DIAGRAM - PANEL, POWER SUPPLY Section FLUORESCENT INDICATOR TUBE DRIVER IC802 DAT CLK XCS XRST AD1, SSYSTEM CONTROLLER IC501 (4/4) 24 FL_O_OUT 21 FL_CLK 23 FL_STB RY+3.3V AMP+12V
ND801 FLUORESCENT INDICATOR TUBE
+3.3V REGULATOR IC153 +12V REGULATOR IC106 RECT D121 124
PT003 MAIN POWER TRANSFORMER

GRID DRIVE Q802

40 G1 AMP12V D802 LED DRIVE QLED_PLAY DAC+3.3V 12V REGULATOR IC107 +3.3V REGULATOR IC201 +3.3V REGULATOR IC154 +5V REGULATOR IC105

LED DRIVE Q804

90 LED_PAUSE

CL+3.3V SW+6V

RECT D121 124

LED DRIVE Q801 S805 HDMI

91 LED_HDMI

RF+3.3V

+3.3V REGULATOR IC1107 +3.3V REGULATOR IC1105 +5V REGULATOR IC505 +6V REGULATOR IC104

DSP+3.3V S97 KEY0

RECT D117 120
+3.3V S95 KEY1 DSP+1.8V 94 KEYEN_A 11 EN_B M+9V +9V REGULATOR IC504 +10V REGULATOR IC102 RECT D+1.8V REGULATOR IC1110 +3.3V REGULATOR IC506 +4V REGULATOR IC103 RECT DF002
AMS PUSH ENTER (US, Canadian) J691 IR REMOTE IN REMOTE CONTROL RECEIVER IC693 D890 REMOTE CONTROL TRANSMITTER

ROTARY ENCODER S805

PT002 MAIN POWER TRANSFORMER
SIRCS SELECT SWITCH ICCH1 COM CHSIRCS_IN P_CONT1 39

FL+3.3V FL+6V

+3.3V REGULATOR IC803

+6V REGULATOR IC101

RECT D105 108
REMOTE CONTROL RECEIVER IC801

DISPLAY-27V (AEP) S501

-27V REGULATOR Q101

RECT D101 104

RY01 OFF ON MULTI 2CH E3.3V RESET MULTI_PRIO DIGITAL OUT(CD) S502 HDMI PRIORITY 55 XDOUT_EN P_CONTD502 AC_OUT 20 RESET SWITCH Q503 RESET SIGNAL GENERATOR IC503 E3.3V +3.2V REGULATOR IC52 +4V REGULATOR IC51 RECT DAC DETECT Q51 D56, 57 RELAY DRIVE Q52

1.4 CL1202 3.2
4.9 3.5 C16V 4.5 4.5 3.3 5.8 C1219 0.01 C16V C1224 0.01 JL1212 JL1213 SLSL+ SPSP+ C1226 1000p CN1202 6P JL1207 JL1208 JL1209 JL1 OCSW CKSW GND LDMNC LDM+ R1236 1k R1237 1k C1225 1000p REV FWD OCSW CKSW

MAIN BOARD (2/4)

R1204 1.2k

C1203 0.01

R1207 2.7k CL1203

3.2 2.2 1.4 1.4

(Page 25)

R1205 FMO R1210 47k

C1208 0.01

R1216 12k

1.4 CL1204 1.4
R1213 6.8k 1.4 3.2 3.2 FIN 3.2 3.2 3.2 3.2 9.2 4.5 RC1223 0.1

JL1211

CL1205 R1219 27k DMO C1210 0.01 MUTE123 MUTE R1224 10k R1254 10k C1213 0.01
5V OCSW1 D-GND M+9V C16V C1215 0.01 R1238 1k R1239 1k M-GND D3.3V R1229 12k TSD_M

MAIN BOARD (4/4)

(Page 27)

H OUT-SW BOARD

SW011 (DISC IN/OUT) M001 (LOADING)

CN010 5P

CN011 2P SW010 (CHUCKING)
CL010 CL011 CL012 CLLDM+ LDMGND CKSW OCSW
CN012 2P CL015 CL2 OSCW GND GND OCSW 1 2
SCHEMATIC DIAGRAM - MAIN Section (2/4) 5
See page 38 for waveforms.
See page 38 for IC Block Diagrams. See page 41 for IC Pin Function Description.

RR580 100

CN506 11P JL645 JL646 JL647 JL2 JL643 1

MAIN BOARD (2/4) A

SCL SDA XAMUTE MU/ST SA/CD
P_CONT1 E4V P_CONT0 D4V D4V D6V D_GND D_GND M10V NC M-GND

JL649 JL650

(Page 35)
DGND XAMUTE SA/CD MU/ST 9
JL644 R524 10k R545 10k R546 10k C538 1000p C10V C6.3V C6.3V FB510 FB505 C533 0.1 D502 MC2836 JL535 JL539 JL587 JL589 JL592 JL593 JL547 JL595 R534 10k RC531 0.1 FB508 EB503 E EB502 E EB501 E
CN501 13P JL500 JL501 JL502 JL503 JL504 JL505 JL506 JL507 JL508 JL509 JL510 JL511 CL519 CL511 CL512 CL513 CL514 XAMUTE SA/CD MU/ST DAC_INIT DAC_DATA DAC_CLK DAC_CS1 DAC_CS2

JL630 C518 0.1

(Page 30)

AUDIO BOARD (1/2) CN152

DAC_INIT DAC_DATA DAC_CLK DAC_CS1 DAC_CS2 ASDMUTE SDA SCL DGND

R525 10k

ASDMUTE SDA SCL

PLL-IC_ISC_SCL

LED_LAT

KEY_INT

PLL-IC_I2C_SDA

MULTI/STEREO

MULTI_PRIO

XDOUT_EN

XAMUTE

No Use

(Page 24)

MAIN BOARD (1/4)

(US,CND)
REV CKSW OCSW D692 SID307BRTP19 REMOTE CONTROL TRANSMITTER D691 MA2J1110GLS0

CKSW OCSW DAC_INIT CL509

R544 10k

JL520 JL521 JL522

JL519 0.2 3.3 3.2 JL523 3.2 (0) 3.2 3.0 3.3.3 (2.7) 3.3 (2.7)
No Use CKSW OCSW DAC_INT DAC_CS3 DAC_CS2 DAC_CS1 LED_PLAY LED_PAUSE LED_HDMI DESTINATION MODEL KEY2 KEY1 AVSS KEY0
No Use I2C_CLK I2C_DATA No Use DMUTE
JL0 (3.3) 3.3 (0) 3.3 (0) JL604

JL596 JL597

RRR521 10k C10V DMUTE STT_M/2 STT_D/P R559 10k

FWD REV

R542 10k R543 10k JLNo Use

SA-CD/CD 50 JL599

R523 10k R522 10k

IC B/D

R603 0

3.3 (0)

JL590 0
JL629 VOUT +3.3V REGULATOR IC506 SI-3010KM-TLS

R599 1k

JL598 R558 10k JL601 JL602 JL603

R598 1.5k C592 0.01

DAC_CS2 DAC_CS1 LED_PLAY
JL524 JL525 JL526 JL527 JL528 R504 R506 10k 10k JL514 JL515 R509 R1k CL500 CL501 JL516 JL517
SYSTEM CONTROLLER IC501 R5F3640DDFAR
STT_M2 STT_D/P No Use P_CONT0 P_CONT2 P_CONT1 MTK RST DVD XIFCS REV FWD DVD_XIFBUSY CDM_OPEN_SW DVD_SCO DVD_SOD DAC_CLK DVD_SID No Use

R596 10k

R597 22k

C591 0.01

R691 10k
S501 DIGITAL OUT (CD) OFF ON CL510

LED_PAUSE LED_HDMI

JL606 3.2 3.2 (3) 3.3 (3) 3.2 (2.8) 3.2 (2.8) 2.2 3.3 0.1 0.4 ()
JL607 JL608 JL609 JL610 JL611 JL612 JL613 JL614 JL615 R520 R518 R519 10k 10k 10k XIFBSY IFSCK IFSDO IFSDI RXSYSRST XIFCS R6

IC693 F

REMOTE CONTROL RECEIVER IC693 NJL23H400A

KEY2 KEY1

REV FWD
SENSE VOUT +5V REGULATOR IC505 SI-3010KM-TLS
KEY0 S502 HDMI PRUORITY C501 0.1 C502 0.1 R570 47k R513 1k R510 10k R512 10k R514 10k

3.2 3.3 3.2 JL530

VREF CEC_TX_OUT TROPENPWM CEC_RX_IN AVCC No Use No Use No Use FL_D_OUT ASDMUTE

5.3.2 R590 1k

SIRCS_IN

AC_CU0

1 RC10V CL518

FL_CLK

FL_STB

MULTI 2CH

DAC_DATA

R560 47k

C503 0.1
30 JL588 R589 6.8k 10k 0.1

C507 0.1

R501 1M 1k D693 MA2J1110GLS0 CL517 R693 100k R695 100k 1k R528 10k JL617 10k JL616 R557 47k R563 10k DAC_DATA DAC_CLK

R587 10k

C10V R592 0

8 VCC 7 CHCHA

C517 0.1

D505 MC2836

R588 33k

C581 0.01

R694 10k

R538 1M

RCL506

IC504 SI-3010KM-TLS

R531 10k

+9V REGULATOR

D-GND D3.3V 5V
SIRCS SELECT SWITCH IC692 TC7W53FK(TE85R)
D-GND D3.3V 5V R586 1k D-GND D3.3V M+9V
C693 2.2 50V C508 0.1 C692 (US,CND) 0.1 (US,CND) RR(AEP) RCL504 R517 10k R515 10k R516 10k R527 10k C515 0.1

Q503 2SC3052EF-T1-LEF RESET SWITCH CL505 0

CL507 3.2 3.2

RESET SIGNAL GENERATOR IC503 PST3635NR 3 OUT VDD GND NC 4 CD 5 3.6

C16V 0.01 R585 68k 10k

X501 5MHz
R562 47k R556 47k R561 100k

C520 0.22

JL638 C577 0.01

5V M-GND OCSW1

C521 0.01

C523 0.1

C522 0.22

R583 10k

R584 12k
C16V JL628 +6V D-GND D3.3V M+9V E3.3V
CL515 CEC_TX_OUT CEC_RX_IN
D501 MA2J1110GLS0 ASDMUTE

JL626 JL627

FL_DATA
OCSW1SIG OCSW1SIG CEC_TX_OUT CEC_RX_IN STT_D/P STT_M/2
RCEC_TX_OUT CEC_RX_IN STT_D/P STT_M/2 DMUTE IFSCK IFSDO IFSDI XIFBSY XIFCS XSYSRST CN504 9P
CN502 19P JL578 LED_LAT LED_PLAY LED_PAUSE LED_HDMI NC EN_A NC 19 JL560 JL557 JL554 JL551 JL549 JL546 JL541 JL538 JL537 JL534 R533 R535 RFL_CS FL_DATA FL_CLK C510 0.1 RKEY1 SIRCS KEY0 JL575 JL573 JL570 JL569 JL567 JL565 JL563 EN_B EN_A LED_PLAY LED_PAUSE LED_HDMI
DMUTE IFSCK IFSDO IFSDI XIFBSY XIFCS XSYSRST

(Page 33)

EN_B D-GND KEY2 E+4V KEY1 SIRCS KEY0 D-GND(FL)

KEY2 RR565 R566 R100 100

RESET CNVSS IFSDO IFSCK
JL618 JL619 JL620 JL621 JL622
D-GND RESET CNVSS RXD1 CLK1 E3.3V RTS1 TXD1 D-GND (NC)
P_CONT1 FL_CS FL_DATA FL_CLK

XIFBSY IFSDI

R568 R569

100 100

JL623 JL624 JL625
6-9. SCHEMATIC DIAGRAM - MAIN Section (3/4) 5 6
MAIN 13 BOARD (Page 27) (4/4)

A MAIN BOARD (3/4)

VREFO RF+3.3V FB1112 C1125 0.1 C1130 0.1 C6.3V CC1159 0.1 C1140 0.1 C1137 0.1 C1139 22p C1146 0.1 C1149 0.1 C1135 0.033

C1165 0.1

C2108 4.7
R2180 10k C1169 0.1 FB2103 C1171 0.1 C1156 0.01 C1175 0.01

C1154 0.1

R1186 10k

R1185 47

R1146 47

C1170 1500p

R2187 47

R1143 47

R1161 47

R1160 47

R1159 10k

C1163 0.01

3.3 FB1107 FBVIN 4 NOISE VOUT C1147 0.047 C1148 0.047 680k C1151 1000p CL2118

VOC/C TRKTRK+ FCS+ FCS-

1.0 C1172 0.1

Q1101 UM6K1N-TN 0

Q1101-2 SA-CD ON SWITCH D2 S2 0.1 (0) R1117 47k
2.1 (2.4) C1114 0.1 CL1101 CL1305 C10V 2.7 2.1 C10V 1.5 CL1303 C1126 0.1 FB1117 CL1105 RCL1301 C1199 4700p DMO FMO CL1304 1.2 1.7 C2503 4.7 1.7 1.4 1.4 1.4 3.3

TRKTRK+

TRKTRK+ FCS+ FCS-

4.7 (0.1)

2.8 (0)

0 3.3 3.3 1.4

C2502 5600p 32 C1108 0.1 R1730 2.7k

FCS+ FCS-

0.1 (0)

S1 Q1101-1 CD ON SWITCH

R1116 1k
RF AMP, SERVO DSP, HDMI TRANSMITTER IC1101 CXD9927R
AGNDHTPLG 162 DDC_CLK 161 DVDDDDC_DA 159 MUTE 158 MUTEDVDDRARARARARARARADVSS 148 CKE 147 DRCLK 146 DVDDRARADVDDRARARABABA_RCS 136 _RAS 135 _CAS 134 _RWE 133 DQMDVDDTSD_M 130
0 3.2 1.8 1.6 3.3 3.3 3.(1.7) 1.(1.4) 1.2 (1.6) 0 RC1109 0.1

R1108 1M

R1111 100

CL1302

Q1103 RT1N241C-TP-1 INVERTER
IOPMON LIMITSW CL1106 REG02 RCL2103 IOP CL1107 Q1102 QST8TR 2 (3.4) 2.5 (3.3) DMO FMO TRO FOO DVD_LD CD_LD C1106 0.01 D-GND R2129 100k R1114 100k C1113 0.01 Q1102-2 AUTOMATIC POWER CONTROL (SA-CD) 0.1 (2.5) -2 -(1.9) 3.6 (3.1) 2.1 (2.4) Q1102-1 AUTOMATIC POWER CONTROL (CD) CL2104 C10V R1110 47k RRRRRRC10V R1124 47k R1123 0

CL1108 TRO FOO

1.7 1.4 1.4
C2118 0.1 C2116 0.1 C2114 0.1 CR1103 5.1k CR1137 10k R1138 10k RJL1113

1.8 CL2154 CL2155 3.3

45 USB_DM 46 USB_VDDUSB_VSS 48 PAD_VRT 49 USB_VDDUSB_VSS 51 DIR_ERROR/NC 52 DIR_AUDIO/NC 53 LIMITSW 54 MSW 55 DVDDHAHAHAHAHAHAHAHA18 RESERVED RESERVED xSYSRST XROMCS 64 HA19 DVDD3 HA16 HA15 HA14 HA13 HA12 HA10 HA20 HA11 XWR HA9 DVDD18 xIFBSY DVDD3 DVDD3
3.3 1.6 3.3 1.3 1.3 1.8 1.8 0.4 0.1 1.2 1.5 (1.2) 3.1 3.3 3.3 3.3 2.8 3.3 3.2 0.1 C2119 1000p R1781 3.3k R1140 1k JL2130 C1164 0.01 C1162 0.01 C1176 0.01

0.8 1.8

CL1110 CL3.3 (0) 1.8 C1127 0.01 A2 A3 A4 A5 2.1

SPFG DMO FMO TRO FOO

R1107 10k

C1184 0.01

C1182 0.22 1.NOISE VOUT 4 GND CONT VIN 5 3.3

R1151 10k

C1186 0.22 FB1115

R2133 0

A8 A18 A19

+3.3V REGULATOR

5V A0 A1 A17

0 (1.3)

0.7 ()

0.6 ()

1.9 ()

2.8 (2.4)

0 (0.5)

CL2101

XROMCS
EEPROM S-24CS64A01-J8T1G ICA0 A1 A2 GND VCC WE SCL SDA 3.2 3.2

C1110 1

CL2102

CL1121

CL1123 CL1160

FB1116 0

R2155 10k

IC1105 TK11133CSCL-G

IC1105

RD8 129

60 0.R2115 R0
1.9 () 3.2 48 ABYTE 46 VSS 45 DQ15/A-DQDQDQDQDQDQDQVCC 36 DQDQDQDQDQDQDQDQOE 27 VSS 26 CE 25 A0

R2150 3.3k

R2151 3.3k

R2152 3.3k

C1158 0.01

2 0.7 ()

3 0.6 ()

11 3.2

12 3.2

14 3.2

15 3.2

23 2.2

24 A16 A15 A14 A13 A12 A10 A11 A20 A9 A1 C1136 0.01 2.1

FB1106

C1155 0.01

C1144 0.01

R1105 10k XWR

RB1112 0

RB1113 0

R1106 10k

FLASH ROM IC1102 S29AL032D70TF-SCD-0801 C2100 0.01 R1135 1k R1193 1k R1191 1k FB1111

R1198 100

C2130 0.01
MUTE RIFSDO XIFCS IFSCK XSYSRST XIFBSY IFSDI MUTE123
MAIN 12 BOARD (2/4) (Page 25)
Note: IC1103 cannot exchange with single. When this part is damaged, exchange the entire mounted board.
6-10. SCHEMATIC DIAGRAM - MAIN Section (4/4) 5
See page 38 for IC Block Diagrams.

MAIN BOARD (4/4) A

CN1110 13P JL1130 PBCK GND 7 GND VEE ZCOM INH 0Y 1Y 0Z 1Z 0X C B JL1135 JL1136 CL1166 CL1167 3.3 CL1168 RA JL1134 CL1165 JL1133 CL1164 JL1132 CL1163 C1103 0.1 JL1131 CL1162 CL1161 R1126 R47 STT_D/P DMUTE STT_M/2

15 R1128 47

PLRCK GND

AUDIO BOARD (1/2) CN151

SBCK GND PDT GND SDTL GND SDTR GND 27M

OPTICAL TRANSMITTER

IC1701 TOTX147L(RED) 3.1
MULTIPLEXER IC1901 TC74LVX4053FT(EL)
VCC IN GND COAXIAL OPTICAL DIGITAL OUT (CD)

C1705 0.22 3.(1.4) L3

LEVEL SHIFT IC1703 TC7S08FU(TE85R) VCC 5 3.3

3.(1.4)

C1702 1

IC1703

IC1702

LEVEL SHIFT 3 L6 R1702

0 (1.4) 2 3

RJ1701 1P D3.3V

0 (1.4)
IC1702 TC7S08FU(TE85R) C1701 47p
D-GND C1704 0.1 C6.3V C1703 0.1
5V CN1801 4P 1 C1801 47p D1801 MA2J1110GLS0 D1802 MA2J1110GLSCN1701 19P HDMI OUT 5V NC CVBS GND (NC)

Ref. No. IC151 IC152 IC153 IC154 IC155 IC156 IC201 IC202 IC203 IC204 IC205 IC206 IC253 IC255 IC291 IC292 Q151 Q291 Q292 Location F-3 F-5 B-7 F-3 E-4 E-4 F-6 E-5 D-5 C-5 D-3 E-5 D-6 D-8 E-8 E-3 E-9 E-8 E-8
6-11. PRINTED WIRING BOARD - AUDIO Section (1/2) -
See page 21 for Circuit Boards Location.
AUDIO BOARD (COMPONENT SIDE)
CL218 CL219 C177 JW150 CL166 C179 C3 C180 CL167 CL168 CL271 CL220 C221 CLCCL217 C218 C219 CL221 C271 CL272 CL273

C226 C227

C276 CCL212 C213 C214 CL213 CL214 C263 C264 CL215 4

C277 C281

CNCL194 CL196 CL198

CL195 CL197

(Page 22)

MAIN BOARD CN1110

CL199 R180 R179 R178 R177 R176 R175 CL183 CL181 CL182 R4 C172 CL184 R9
C209 C208 C207 R181 C171 CR182 C205 C210 R201
2 CL158 CL151 CL193 C256 CL180 14CL179 CL177 C163 C255 CL162 CLR299 R289 QE B CL169 CL192 C168 R159 E B R185 R184 Q151 CL157 CL165 CL164 CL201 1

MAIN BOARD CN501

IC292 IC155 8
R173 R174 R171 C160 C155 CLC175 EEC151 R157 R156

C3 CL154

R150 CL190
CL188 CL153 C158 C1 C5 CL160 CL189
R160 R161 CL170 CL171 CL172 CL174 CL175 CLCL173 C164 R162 R155 1
R169 R168 R167 R1 C162 C161 C176

C292 C182 C291 EE152

5 R293 RQ291 B E CL191

CL156 4

C154 R154

C183 CL187 FB153

C152 CL155

R151 FB151

C153 R153

5 R158

11, 12 1-0877-066(11, 12)