2006 Suzuki GSR600

I n s ta l l a t i o n I n s t r u c t i o n s
Power Commander USB Cable CD-ROM

Parts List

Button Adjustment Display
Installation Guide Power Adapter Power Commander Decals Dynojet Decals Velcro

Alcohol Swab Wire tap

Faceplate Buttons USB Port

Expansion Port

The ignition MUST be turned OFF before installation!
You can also download the Power from our web site at:
Commander software and latest maps www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
i332-411 www.powercommander.com 2006 Suzuki GSR600 - PCIII USB - 1
Remove the main seat and both side covers.
Prop the fuel tank up using the prop rod in the tail section.

Fig. A

Lay the PCIII in the tail section. Route the wiring harness from the go towards the engine (Fig. A).
PCIII under the fuel tank bracket and

Fig. B

Unplug the stock wiring harness from each injector (Fig. B).
Plug the connectors from the PCIII inline of the stock injectors and the stock wiring harness (Fig.C).

Fig. C

Orange - cylinder 1 Y ellow - cylinder 2 Green - cylinder 3 Blue - cylinder 4

i332-411

www.powercommander.com
2006 Suzuki GSR600 - PCIII USB - 2
Attach the ground wire from the PCIII to the NEGA TIVE side of the battery (Fig. D).

Fig. D

GROUND WIRE
Locate the throttle position sensor (TPS) connector.
located on the right hand side of the throttle bodies and is gray in color (Fig.E). 9

This connector is

Unplug the TPS connector from the throttle body housing.

Fig. E

Crimp the supplied wire tap to the PINK wire with a BLACK stripe. to the wire tap (Fig. E). Attach the GREY wire from the PCIII
It is recommended to use dielectric grease on these connections
Connect the TPS connector back onto the throttle body.
Install the PCIII in the tail section as shown in Fig. F. the tool kit then the PCIII can be If you do not have
layed flat against the inner fender. the supplied alcohol swab before
Make sure to clean both surfaces with attaching the velcro. 13
Bolt the fuel tank back into place and replace the side covers.
2006 Suzuki GSR600 - PCIII USB - 3