TASCAM DR-07 Tested media List
Manufacture Transcend Model SDHC Card Class 6 Extreme III 30MB/s EDITION SanDisk Extreme III SDHC Parts# TS8GSDHC6 TS16GSDHC6 SDSDX3-008G-P31 SDSDRX3-4096-903 SDSDH-016G-J61 SDSDH-008G-J61 SDSDH-004G-J61 SDSDH-002G-J61 SDSDB-8192-P36 SDSDB-4096-P36 SDSDB-2048-P36 SD-K04GR5W4 SD-M02GR4W HPC-SD1GT4C HPC-SD2GT4C HPC-SDH8GT4C RP-SDV32GL1K RP-SDV08GL1K RP-SDV04GL1K RP-SDM08GL1K RP-SDM01GL1A RP-SDV02GL1A RP-SDV01GL1A SD/2GBFE SD/16GB SD/8GB SD/4GB SPJ006SDH-4G SPJ006SDH-8G SP016GBSDH006V10 SPJ080SDC-1G SPJ080SDC-2G SD2GB-810 SDHC4GB-850 SDHC8GB-850 SD2GB-60-810 SDHC4GB-60-850 SDHC8GB-60-850 SD2GB-133-810 SDHC4GB-133-850 SDHC8GB-133-850 SDB-2G SDH6B-4G SDH6B-8G Capacity 8G 16G 8G 4G 16G 8G 4G 2G 8G 4G 2G 4G 2G 1GB 2GB 8GB 32G 8G 4G 8G 1G 2G 1G 2G 16G 8G 4G 4G 8G 16G 1G 2G 2G 4G 8G 2G 4G 8G 2G 4G 8G 2G 4G 8G NG NG NG Remarks

SanDisk

SanDisk Ultra II SD/SDHC
SanDisk Standard SD/SDHC Toshiba HAGIWARA Hi Speed Type Class 4 CLASS 4 T Series SDHC CLASS 4 T Series SDHC Class6 Panasonic

SDHC Class4 Class6 SD

Kingston
Secure Digital High Capacity
SDHC CLASS6 SiliconPower Standard model 80X SD SDHC

Platinum II 60X

Professional 133X Secure Digital 1.1 PQI Secure Digital 2.0
Notice: The above cards were tested successfully with this model. Over time, these specific cards may become unavailable. At that time, it would be best to contact the CF/SD card manufacturer directly and have them suggest the model with the most similar specifications that is currently available which remains within the maximum capacity limit.

DR-07 Release Notes

Contents
Updates... 1 New function.. 1

V1.02 addition... 1

Maintenance items... 1

V1.01 changes... 1

Confirmation of firmware version.. 2 Firmware update procedures.. 2

Updates

Always use the most recent firmware for this device. Please visit the TASCAM web site at http://www.tascam.com to check for the latest firmware.

New function

V1.02 addition
A new filter function has been added for the purpose
of enhancing the sound quality of the mic inputs. This new function allows you to boost sound frequencies of 400 Hz and below. By using this function, you can record low frequencies with greater richness. The following changes have been made with the addition of this function. The LCF icon (third from left) at the top of the Record Screen has been changed to FILT.
On the INPUT SETTING screen, the LOW CUT (LOW CUT FILTER) item has been changed to FILTER. On the INPUT SETTING screen, the FILTER item setting parameters now include OFF, +400Hz, -40Hz, -80Hz and -120Hz.
The 40Hz, 80Hz and 120Hz still function as before, cutting frequencies below 40, 80 and 120 Hz, respectively.

Maintenance items

V1.01 changes
A bug that caused the LINE input level to be fixed
and prevented REC LEVEL volume changes when level control was set to AUTO has been fixed. A bug that caused Write Timeout to appear when recording an MP3 file at 48-kHz sampling frequency has been fixed.
A bug that prevented recording from continuing
correctly after using the track increment function when PRE REC was set to ON has been fixed. A bug that prevented recording an MP3 file from continuing correctly after pausing and resuming recording has been fixed.

D01073620B

TASCAM DR-07
Confirmation of firmware version
Confirm the firmware version of your DR-07 before conducting a firmware update.
1 Turn the units power ON. 2 Press the MENU key to open the MENU screen, select "INFORMATION" and press the / key. 3 Turn the wheel right to confirm the "System Ver." displayed at the bottom.
You do not need to update the units firmware if the version shown is the same as or newer than the version that you intend to use for the update.
Firmware update procedures

CAUTION

When you updated the firmware, make sure that the batteries have enough remaining power or use an optional AC adaptor (PS-P520). The program has been set so that the update will not be conducted if battery power is insufficient.
The screen shown is an example. The actual display differs.
1 Download the most recent firmware from the TASCAM web site (http://www.tascam.com). 2 Turn the units power ON and use the included USB cable to connect it with a computer. This unit will be recognized as an external drive (external storage device) by the computer. 3 Copy the downloaded firmware to the UTILITY folder on the DR-07. 4 After copying has completed, disconnect the unit from the computer following the correct procedures, remove the USB cable. The unit automatically restarts. Then, turn its power OFF. 5 While pressing and holding both the MENU and / keys, turn the unit power ON.
The unit starts up in update mode, and the update file appears on the screen.
If this screen does not appear, turn the power OFF. Then while pressing and holding both the MENU and / keys, turn the units power ON again. Continue to press and hold the MENU and / keys firmly until this screen appears.
6 Select the firmware (highlight the item) then press /. The following screen appears.
The current version appears on the left and the updated version appears on the right.
7 Press the / key to start the update. 8 When the update is complete, the power turns OFF automatically. Turn the power ON again. 9 Follow the Confirmation of firmware version instructions above to check that the System Vers. is now the most recent version of the firmware.
This completes the procedure for updating this unit.
This screen shows a list of the firmware update files inside the UTILITY folder of the unit. Also, the screen shows the firmware copied at Step 3 above. No Update File appears if there is no update file in the UTILITY folder.

10 Connect to a computer with USB and delete the firmware update from the units UTILITY folder.

2 TASCAM DR-07