Teac MC-DX32I Manual
Teac MC-DX32I, size: 1.6 MB
Teac MC-DX32i Wall Mount Guide
Teac MC-DX32i Quick Start Guide
Aluminum honey-comb diaphragm NXT speakers 1" NXT exciter, 4" active subwoofer iPod Dock with video outputs (S-video, composite video) Remote control (also controls iPod functions including menu operation) Remote sensor on iPod Dock Status LED Charges iPod while playing iPod adapters included Wall mountable (speakers)
Here you can find all about Teac MC-DX32I, for example review and slim. You can also write a review. [ Report abuse or wrong photo | Share your Teac MC-DX32I photo ]
User reviews and opinions
|MoSkeeters||10:01pm on Monday, August 16th, 2010|
|BEST STERIO FOR THE MONEY. BAR NONE!! BUY ONE OF THESE AND YOU WILL NOT BE SORRY. I WAS ONE AT A CONDO IN CATALINA THAT WE HAD RENTED.|
|GEOINTHENORTH||8:33pm on Friday, July 9th, 2010|
|good if its your style over all its okay. it is very thin. if thats what your looking for then get it. its very stylish. very disappointing After very little use of the CD player.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION < Do not expose this apparatus to drips or splashes. < Do not place any objects filled with liquids, such as vases, on the apparatus. < Do not install this apparatus in a confined space such as a book case or similar unit. < The apparatus draws nominal non-operating power from the AC outlet with its STANDBY/ON switch in the standby position. < The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time. < An apparatus with Class ! construction shall be connected to an AC outlet with a protective grounding connection. < Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. < Excessive sound pressure from earphones and headphones can cause hearing loss. < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. < USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
This product has been designed and manufactured according to FDA regulations title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968, and is classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings. The label required in this regulation is shown.
Rear panel of the Subwoofer
Optical pickup: Type Manufacturer Laser output Wavelength
: : : :
SF-P200Z SANYO Electric Co., Ltd Less than 0.5 mW on the objective lens 765 - 815 nm
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the equipment and/or the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION Changes or modifications to this equipments not expressly approved by TEAC CORPORATION for compliance will void the users warranty.
AC POWER CORD CONNECTION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Pour le CANADA
CORDE DE CONNEXION CA ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit.
Before Using the Unit
Read this before operation
< As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The ventilation holes should not be covered. Make sure there is at least 5 cm of space on each side of the unit. Do NOT place anything on top of the unit. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on any other electronic components. < Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should fall into the unit, contact your dealer or service company as soon as possible. < When removing the power plug from a wall outlet, always pull directly on the plug. Do not pull on the line cord. < To keep the laser pickup clean, do not touch it and always close the CD door after each use. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry, lint-free cloth. < Keep this manual in a safe place for future reference.
Important Safety Instructions. 2 Before Using the Unit. 4 Discs. 5 Connection. 6 Unit Functions. 8 Wall Mounting. 10 Remote Control Unit. 10 Getting started. 11 Basic Operation. 12 Listening to iPod. 14 Listening to CD. 16 Repeat Playback. 17 Shuffle Playback. 18 Programmed Playback. 18 Listening to an External Source. 20 Listening to the Radio. 21 Preset Tuning. 22 Setting the Clock. 23 Setting the Timer. 24 Troubleshooting. 26 Specifications. 27
CAUTION: DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at high speeds. Do NOT lift or move the unit during playback. Doing so may damage the disc or the unit. WHEN MOVING THIS UNIT When changing places of installation or packing the unit for moving, be sure to remove the disc. Moving this unit with the disc loaded may result in malfunction or other damage.
trademark of New Transducers Ltd.
Discs which can be played on this unit: Conventional audio CDs bearing the COMPACT DISC DIGITAL AUDIO logo on the label: < CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location with direct sunlight and keep your discs away from sources of heat such as radiators or heat-generating electrical devices. < Printable discs arent recommended because the label side might be sticky (or contain glue), which will damage the unit. < Do not stick papers or protective sheets on the discs and do not use any protective coating spray. < Use a soft oil-based felt-tipped pen to write information on the label side of a disc. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side of the disc. < Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction. < Do not use irregular shape CDs (octagonal, heart shaped, business card size, etc.). CDs of this sort can damage the unit: < Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.) < To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
Properly finalized CD-R and CD-RW discs
Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable. < Copy-protected discs and other discs that do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC Corporation and its subsidiaries cannot be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact the producers of the disc.
< If you are in any doubt as to the care and handling of any disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.
How to remove the disc
How to hold the disc
< Should the disc become dirty, wipe the surface from the center hole outward towards the outer edge with a soft, dry, lint-free cloth:
< Never use chemicals such as record (LP) sprays, antistatic sprays or fluids, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the discs plastic surface. < Discs should be returned to their cases after each use to avoid dust and scratches that may eventually cause your disc to skip. < Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Long exposure to high temperatures will warp the disc. < Do not play any disc that is warped, scratched, deformed or damaged. Playing such discs may cause irreparable harm to the playback mechanism.
CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord. Speaker (R) Speaker (L)
Rear panel of the main unit
Side panel of the main unit
A AM loop antenna
Position the antenna for the best sound. If you want, you can hook the AM antenna on a wall as shown below:
E AC Power Cord
Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord.
F POWER switch of the Subwoofer
Use this switch to turn the system on or off. < If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. To avoid loosing your settings, it is advisable to keep this switch ON when not in use.
B FM antenna
While in FM mode, tune in an FM station and extend the lead to find the best position for reception. This antenna may need to be repositioned if you move your unit to a new location. FM Outdoor Antenna In an area where FM signals are weak, it will be necessary to use a 75-ohm unbalanced-type outdoor FM antenna using an optional (not supplied) matching transformer connected to an external antenna. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements.
Outdoor FM Antenna (75)
For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume using the VOLUME buttons. The sound from the speakers is cut off while the headphone jack is inserted. CAUTION Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do not place your headphones on your head until after you have plugged them in.
H AUX IN
You can connect a portable audio player to this jack. Connect the LINE OUT or PHONES jack (audio output jack) of the player using the supplied stereo mini plug cable. When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your MC-DX32i.
I VIDEO OUT terminal C Subwoofer
Connect the TO SUBWOOFER and the FROM MAIN sockets using the supplied cable. < Connect the Connectors in the direction as figured. This terminal outputs video signal from iPod. Use an RCA (pin) video cable to connect the Dock to the composite video connector of a television or monitor.
J S-VIDEO OUT terminal
This terminal outputs video signal from iPod. Use an S-Video cable to connect the Dock to the S-Video input of a suitably equipped television or monitor. Use this connection in preference to a composite video connection.
Connect the left speakers plug to L, and the right speakers plug to R. < If not using the included speakers, make sure the speakers you use are at least 4 impedance. < Do not connect anything other than speakers to these terminals.
G H I J K L
G J K Q R
H U V W X Y
A B L S T E Z M
Note: To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. Associated controls on the remote control will also operate similarly.
A SKIP (.//) / TUNING
N Dock connector
In iPod or CD mode, momentarily press this button to skip tracks. Hold down this button to search for a part of a track. In TUNER mode, momentarily press this button to tune in stations. In Standby mode, these buttons are used to set or adjust the clock and the timer.
B PLAY/PAUSE (y/J)
Before use, insert an appropriate Dock adapter in the Dock (see page 11). Insert an iPod mobile digital device into this dock.
O CD door P Remote Sensor
In iPod or CD mode, use this button to start or pause playback.
When operating the remote control unit, point it towards here.
In CD mode, use this button to turn on and off the shuffle playback. < This button doesnt work in iPod mode.
In TUNER mode, use these buttons to select a preset station. In iPod mode, use these buttons to scroll up and down the menu.
In CD mode, use this button to set the repeat function. < This button doesnt work in iPod mode.
E MEMORY/TIME SET
This button is equivalent to the MENU button on your iPod. In iPod mode, use this button to go back to the previous menu.
In CD mode, use this button to program tracks. In TUNER mode, use this button to preset stations. This button is also used for clock adjustment.
F Display G STANDBY/ON (
Use this button and the VOLUME buttons to adjust the level of high frequency sound range.
) Use this button to turn the unit on or standby. The main unit is powered via the subwoofer. You need to first turn on the subwoofer. When the main unit is in the standby mode, the power indicator of the Subwoofer is orange. When the unit is turned on, the indicator turns blue.
Use this button and the VOLUME buttons to adjust the level of low frequency sound range.
Use this button to set sleep timer.
Use this button together with the SKIP buttons to set the timer.
Use this button to select a source (iPod, CD, TUNER or AUX).
In iPod or CD mode, use this button to turn on and off the shuffle playback.
In CD mode, use this button to open and close the CD door.
In iPod or CD mode, use this button to set the repeat function.
Use this button to select AM or FM.
K FM MODE
In FM TUNER mode, use this button to select STEREO or MONO.
L STOP (H)
This button is equivalent to the Center button on your iPod. In iPod mode, use this button to confirm selection in menus.
Use this button to mute the sound.
In CD mode, use this button to stop playback. < This button doesnt work in iPod mode.
Press the up + or the down button to adjust the volume.
You can mount the left and right speakers on a wall. Precautions < Be aware that the length of the cables are approximately 3 m. Do not attempt to mount the speakers too far from the subwoofer. < Drill holes into solid wall support, such as wooden frame or concrete wall. < TEAC supplies these brackets as a convenience to the product owner. Consult your local building codes and exercise all necessary caution when mounting these brackets. If you are unsure how to use the supplied brackets, consult with a local tradesmen or building supply expert.
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit.
< Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control. < If the remote control unit is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may also operate incorrectly.
To hook on the wall
1. Fix the brackets on the rear panel of the speakers using the supplied short screws.
Battery Installation 1
2. Use the supplied guide sheet to mark the exact drilling points on the wall. 3. Drill holes in the wall at the marked points. 4. Screw the supplied long screws into the wall. Leave about 5 mm space between the screws head and the wall. < As a convenience, a set of tapered plastic anchors is supplied. If you chose to use these anchors, drill a pilot hole using a 6 mm drill bit then tap the anchor into the pilot hole. Only use these anchors if they are appropriate for the materials onto which the unit is to be mounted. Consult your local hardware store if you are uncertain. 5. Before going on, connect the speakers and the subwoofer using the supplied speaker cables (see page 6-7). 6. Carefully hang the speakers onto the screws.
1. Remove the battery compartment cover. 2. Put in the lithium battery (CR2032, 3V). 3. Close the cover. Battery Replacement If the distance required between the remote control unit and main unit decreases, the battery is exhausted. In this case, replace the battery with a new one. Precautions concerning batteries Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.
Note: Ensure that the speaker locks onto the hooks and that the hooks are strong enough to support the weight before removing your hands.
The MC-DX32i comes mounted with an adapter for iPod with color display (40GB, 60GB), 60GB (color) + Photo 40GB/60GB. To play your iPod through the MC-DX32i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below. 1. Remove the adapter from the Dock of the MC-DX32i. Hold the left and right sides of the adapter and gently pull it up. 2. Choose the Dock adapter that fits your iPod mobile digital device. Video 30GB for iPod with video (30 GB). ENGLISH Video 60GB/80GB for iPod with video (60 GB, 80 GB). nano for iPod nano. mini for iPod mini. 20GB (color) + Photo 30GB for iPod with color display (20GB, 30GB, U2 Special Edition). 60GB (color) + Photo 40GB/60GB for iPod with color display (40GB, 60GB). 20GB + U2 for iPod with Click Wheel (20 GB, U2 Special Edition). 40GB for iPod with Click Wheel (40 GB). < Use a commercially available adapter to play iPod with dock connector (with four buttons under the display). iPod is a trademark of Apple, Inc., registered in the U.S. and other countries. < When you need to remove the adapter, hold the left and right sides of the adapter and gently pull it up. < When you dont use the Dock, use the supplied cover for the Dock to prevent dust from settling on the Dock. 3. Insert the adapter into the Dock of the MC-DX32i. Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight click is heard indicating the adapter is inserted correctly.
Compatible iPod Software
In case your iPod will not work with the MC-DX32i or with the remote control unit, software update may solve the problem. Visit the Apple website and download the latest iPod Software.
(Rear panel of the subwoofer)
3 Select a source by pressing the FUNCTION button.
1 Turn on the subwoofer.
2 Press the STANDBY/ON switch on the main unit.
< To listen to an external source connected to the AUX IN jack, select AUX. < In iPod and AUX modes, the display always shows the clock and the volume level. < If you press and hold the TIME SET button for 3 seconds in CD or TUNER mode, the clock will be displayed for a few seconds.
4 Play the source and adjust the volume using the
You can set a sleep timer so the unit turns itself off after a specified time. Press the SLEEP button repeatedly until desired time appears on the display.
1. Press the BASS or TREBLE button. To adjust the level of low frequency sound range, press the bass button. To adjust the level of high frequency sound range, press the treble button. 2. Within 5 seconds, press the VOLUME buttons to change the setting. SLEEP 90, 60 or 30: The power will be switched off 90, 60 or 30 minutes later. SLEEP 00: The sleep timer is off. The level can be adjusted from 5 to +5. < If you want to check the remaining time, press the SLEEP button once. The remaining time will be displayed for a few seconds.
To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound.
< The MUTING indicator lights and the volume level blinks on the display to indicate that the muting is engaged. < If you change the volume or source during the muting, the muting will be canceled.
Listening to iPod
Insert the iPod into the Dock of the MC-DX32i. Then press the Play/Pause button (y/J) on the iPod. The MC-DX32i will automatically turn on and start playback from the iPods music list. < If the iPod that is in playback mode is inserted into the Dock, the MC-DX32i will automatically turn on and start playback of the iPod. < Make sure to use an appropriate Dock adapter (see Getting started on page 11). < The iPod battery will be fully recharged when the iPod is docked and the MC-DX32i is ON. < When headphones are plugged into the iPod, sound comes from both the speakers of the MC-DX32i and the headphones. < The Stop button (H) doesnt work in iPod mode.
To suspend playback temporarily (pause mode)
Press the Play/Pause button (G/J) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button (G/J) again.
To skip to the next or a previous track
During playback, press the skip button (. or/ ) repeatedly until the desired track is found. The selected track will be played from the beginning. < When the. button is pressed during playback, the track being played will be played from the beginning. To return to the beginning of the previous track, press the. button twice.
Search for a part of a track
During playback, hold down the skip button (.or/) for more than 2 seconds and release it when the part you want to listen to is found.
To select iPod mode
Select iPod using the FUNCTION button. If an iPod is already docked, playback will start. In iPod mode, press the Play/Pause button (G/J) to start or pause playback.
To go back to the previous menu
To activate the shuffle mode
Press the MENU button to go back to the previous menu. This button is equivalent to the MENU button on your iPod.
During playback, press the SHUFFLE button of the remote control unit to change the shuffle mode. Each time the SHUFFLE button is pressed, the SHUFFLE setting of iPod is changed as follows: songs albums off ENGLISH
If iPod is set to shuffle songs or albums, the Shuffle icon ( appears in the iPods display.
Select the menu item
< The SHUFFLE button of the main unit doesnt work in iPod mode.
To activate the repeat mode
Press the PRESET/SCROLL buttons (/) to scroll to the menu item you want, and then press the SELECT button.
During playback, press the REPEAT button of the remote control unit to change the repeat mode. Each time the REPEAT button is pressed, the REPEAT setting of iPod is changed as follows: One All off
If the iPod is set to repeat one song, the Repeat One icon ( appears in the iPods display. If the iPod is set to repeat all songs, the Repeat icon ( appears in the iPods display.
< The REPEAT button of the main unit doesnt work in iPod mode.
Listening to CD
1 Press the FUNCTION button to select CD.
4 Press the OPEN/CLOSE button to close the CD door.
2 Press the OPEN/CLOSE button.
< It takes a few seconds for the unit to load the disc. < When no disc is loaded in the CD player, no cd is displayed.
total playing time
3 Put a disc onto the center spindle of the player with the
label side facing you. Press the disc onto the spindle until a slight click is heard indicating the disc is mounted correctly.
5 Press the Play/Pause button (y/J) to start playback.
current track number
Elapsed time of current track
< Never put more than one disc in the mechanism at a time. < Ensure that the disc is correctly mounted on the spindle and locked in place.
Playback starts from the first track of the disc. < When the playback of all the tracks has finished, the unit stops automatically.
Every time the REPEAT button is pressed, the mode is changed as follows: REPEAT REPEAT ALL (off) ENGLISH
To stop playback
Press the Stop button (H) to stop playback.
< If one of the following buttons is pressed, repeat mode will be canceled: STOP, FUNCTION, FM/AM, OPEN/CLOSE, STANDBY/ON
The track is programmed, and the next program number (P02) is displayed. < Repeat this step to program more tracks. < You can program up to 32 tracks.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until the program number to be changed appears on the display. Select a new track number using the Skip button (.or/) and then press the MEMORY button.
4 When the selection of track numbers is completed,
press the Play/Pause button (G/J) to start programmed playback.
To clear program
< When the playback of all the programmed tracks has finished, or if you press the Stop button (H), the MEMORY indicator will go off and the program mode will be cancelled. Still the program is retained in memory. You can return to the programmed playback by pressing the MEMORY button and the Play/Pause button (G/J). < Shuffle function doesnt work during programmed playback. To clear the programmed contents, press the MEMORY and the STOP button (H) in the stop mode. < If one of the following buttons is pressed, the programmed contents will also be cleared: FUNCTION, FM/AM, STANDBY/ON < If the unit is disconnected from the power supply, the programmed contents will be cleared.
Listening to an External Source
1 Connect the PHONES jack (audio output jack) of a 3 Play the source, and adjust the volume using the
portable audio player to the AUX IN jack of the MCDX32i using the supplied stereo mini plug cable.
VOLUME buttons of the MC-DX32i and of the audio player.
When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your MC-DX32i. You can use this way of connection to listen to an iPod that has no Dock connector or that has, but an appropriate Dock adapter is not available. < Turning the volume of the mini player up too high may cause the sound from your MC-DX32i to be distorted. If this is the case, reduce the volume of the mini player until the distortion stops and then adjust the volume level of the MC-DX32i to a comfortable listening level
2 Press the FUNCTION button to select AUX.
Listening to the Radio
FM MODE button
Pressing this button alternates between STEREO mode and MONO mode.
1 Press the FUNCTION button to select TUNER.
STEREO FM stereo broadcasts are received in stereo and the STEREO indicator lights in the display. < If the sound is distorted and the STEREO indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode. MONO To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise.
< You can also use the FM/AM button to select TUNER.
2 Press the FM/AM button to select a band.
3 Select the station you want to listen to (auto selection).
If the reception is poor
For the best reception, rotate the FM or the AM antenna until you get stations clearly.
Hold down the Skip button (.or/) until the frequency display begins to change. When a station is tuned in, the tuning process will stop automatically. < To stop the auto selection, press the Skip button (.or/).
Selecting stations which cannot be tuned automatically (manual selection) When the Skip button (.or/) is pressed momentarily, the frequency changes by a fixed step. Press the Skip button (.or/) repeatedly until the station you want to listen to is found.
How to select preset stations
FM/AM PRESET MEMORY
1 To select FM or AM, press the FM/AM button.
You can program 10 FM & 10 AM channel presets. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased.
2 Press the PRESET button repeatedly until the desired
preset station is found.
1 Tune in a station you want to listen to (see steps 1 to 3 of page 21).
2 Press the MEMORY button.
3 Within 5 seconds, select a preset channel to store the
station using the PRESET buttons.
4 Within 5 seconds, press the MEMORY button.
The station is stored and the MEMORY indicator goes off. To store more stations, repeat steps 1 to 4.
Setting the Clock
4 Press the SKIP button (.//) to set the current
TIME SET STANDBY/ON
If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased.
5 Press the TIME SET button.
The minute value blinks.
1 If the unit is on, press the STANDBY/ON switch to turn
6 Press the SKIP button (.//) to set the current 2 Press and hold the TIME SET button for more than 3
seconds and release it when 12H or 24H appears on the display. 12 or 24 blinks. If you want to change the hour mode, press the.or/ button.
< If you leave the unit idle for 7 seconds, the time setting mode will be cancelled.
7 Press the TIME SET button.
The clock starts.
3 Press the TIME SET button once more.
The hour value blinks.
Setting the Timer
4 Press the SKIP button (.//) to set the stop time
(hour), and then press the TIMER button.
< The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer.
1 Press and hold the TIMER button for more than 2
seconds and release it when the hour value starts blinking. The minutes value starts flashing.
5 Press the SKIP button (.//) to set the stop time
(minute), and then press the TIMER button. TIMER and ON indicators appear on the display. < When no button is pressed for 7 seconds, the timer setting mode will be cancelled.
2 Press the SKIP button (.//) to set the start time
6 Press the SKIP button (.//) to select a source
(iPod, CD or TUNER), and then press the TIMER button. < You cannot select AUX.
The minutes value starts flashing.
3 Press the SKIP button (.//) to set the start time
(minute), and then press the TIMER button.
TIMER and OFF indiactors appear on the display and the hour value starts flashing.
7 Press the SKIP button (.//) to set the volume, and
To turn on or off the timer
then press the TIMER button.
When you dont use the timer, press the TIMER button to turn it off. (The TIMER indicator disappears from the display.) Press the TIMER button again to turn it on. < When the timer is turned on, the timer settings are displayed one by one, and the TIMER indicator lights on the display. Setting the timer is now completed and the timer is turned on. Your timer setting is displayed one by one, and the TIMER indicator lights on the display. ENGLISH
8 Prepare the source.
If you selected iPod in step 6 , insert an iPod. If you selected CD in step 6 , set a disc. If you selected TUNER in step 6 , tune in a station.
9 Press the STANDBY/ON button to turn the unit off
The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day. Dont forget to turn the unit off (standby), or the timer wont work. < Playback volume will gradually increase up to your set volume when the unit is turned on by timer. < If the source is set to iPod but no iPod is set, the unit will turn on into TUNER mode. < If the source is set to CD but no disc is set, the unit will turn on into TUNER mode. < When the source is set to TUNER and the unit turns on, it will tune in to the station you selected last time.
If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. Sound skips. e Place the unit on a stable place to avoid vibration and shock. e If the disc is dirty, clean the surface of the disc. e Dont use scratched, damaged or warped discs.
No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet. No sound from speakers. e Select the source by pressing the FUNCTION button. e Check the connection to the speakers. e Adjust the volume. e Pull out the headphones plug from the PHONES jack. eIf the VOLUME level indicator is blinking, press the MUTING button. The sound is noisy. e The unit is too close to a TV or similar appliances. Install the unit apart from them, or turn them off. Remote control doesnt work. e Press the STANDBY/ON switch to turn the unit on. e When the battery has run out, put in a new one. e Use remote control unit within the range (16 ft.) and point at the front panel. e Clear obstacles between the remote control unit and the main unit. e If a strong light is near the unit, turn it off.
Cannot listen to any station, or signal is too weak. e Tune in the station properly. e Rotate the FM or AM antenna for the best reception position. Though the broadcast is stereo, it sounds monaural. e Press the FM MODE button.
If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased.
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm environment, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the unit turned on for one or two hours. Then the unit will stabilize at the temperature of its surroundings.
Will not play. e Remove the iPod from the dock, wait a few seconds, and insert it again. e Software update may solve the problem. Visit the Apple website and download the latest iPod Software.
If the surface of the unit gets dirty, wipe with a soft cloth or use diluted mild liquid soap. Never spray liquid directly on this unit. Apply your cleaner to your cleaning cloth and wipe gently. Be sure to remove any excess completely. Do not use thinner, benzene or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using.
Will not play. e Load a disc with the playback side facing away. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Depending on the disc, etc. it may not be possible to play back CD-R/RW discs. Try again with another disc. e You cannot play back unfinalized CD-R/RW discs. Finalize such a disc in a CD recorder and try again.
|Product Type||Micro system|
|Dimensions (WxDxH) / Weight||Main unit : 10 in x 4.5 in x 6.7 in / 3.1 lbs Speaker system : right/left channel speaker : 8.3 in x 3.2 in x 6.7 in / 1.3 lbs Speaker system : subwoofer : 6.3 in x 13.2 in x 9.6 in / 11.7 lbs|
|Built-in Cradle||iPod cradle|
|Sound Output Mode||Stereo|
|Response Bandwidth||50 - 20000 Hz|
|Output Power / Total||25 Watt|
|Input Sensitivity||300 mV|
|Amplifier Output Details||5 Watt - 2 channel(s) ( main ) 15 Watt - 1 channel(s) ( subwoofer )|
|Built-in Clock||Digital clock, timer|
|Speaker(s)||2 x right/left channel speaker - 4 Ohm - wired 1 x subwoofer - 8 Ohm - wired|
|Driver Details||Right/left channel speaker : 1 x high/midrange driver - NXT Flat Panel Subwoofer : 1 x subwoofer driver - 4"|
|Type||Radio tuner - AM/FM - digital|
|Preset Station Qty||20 preset stations|
|AM Preset Station Qty||10 preset stations|
|FM Preset Station Qty||10 preset stations|
|Media Load Type||Vertical|
|CD Track Programming||Yes (32 tracks)|
|Connector Type||1 x audio line-in ( mini-phone stereo 3.5 mm ) - rear 1 x headphones ( mini-phone stereo 3.5 mm ) - rear 1 x composite video output ( RCA phono ) - rear 1 x S-Video output ( 4 pin mini-DIN ) - rear 1 x IPod docking|
|Included Accessories||8 dock adapters|
|Cables Included||Audio cable|
|Power Device||Power supply|
|Power Consumption Operational||80 Watt|
|Universal Product Identifiers|
50PF9630A Coupe ZFT307MW Iriver E150 OTM1101VBS Projectors SH-S223C Slim 19LS4R CS-29M20SPQ VGN-AR71S Satellite L25 Netshell VI-2300 42PF9966-37B 8FF3FPB MP520 Yamaha DD5 WV-CW860 DW341K DN-X800 Military KX-TG2583S SRS-Z750 Portege R100 KDE-P42HVX SC-DX103 LGC-330W DC420 STR-DB900 AVR-5805 ED-A110 2007 Roco Battle Game Navi XT ES1mkii Bros WII Expand 3VS351ID Harmony 659 Electrisaver E30 LTV-2701 3644-6 KG Benq-siemens EF71 Trekker HP 9S SR-JV80-10 DGS-3308TG Elan 110 X-835 Triggerfinger Pluie DVR-S150 Nokia E60 SV-DVD3E DMC-LX3 JET 3055 LCX-110C Omni-624 CUE Ecue Imageclass D780 DMP-555 25DG16ET ESF63020X TD9473 115HP-1998 ATX 80 GR-P207TLQ Yamaha CS1X Aastra M730 Blackberry 7510 ML-2010 Blitz BZX8 EG8003 Shield SME-32DL5 PX720WD IC-GM1500E Maxi-cosi Tobi KDC-MP632U STR-DE635 PCH-DL DVD625 021 7941G Sidekick LX 503CX P4vxadp10A MS7192SM 42LG7000 BEU DEH-P88RS DPF-D92 WM2487HRM LBP-1120 MG15CD GS 300 KDL-26S5500 AXM-P90RS RSE8kpus 150 FM 32LG30RA SBH600
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101