TomTom GO

Whats in the box

a Your TomTom GO

A Microphone B Charging light C On/Off button D Light sensor E Reset button F Speaker G Memory card slot (SD card not included) for optional additional maps H USB connector I TomTom connector / RDS-TMC connector J External antenna connector K Audio out connector b Car charger

J F H G I K E

c Windshield mount

d Documentation pack

e Home dock (GO 730, 930)

f USB cable (GO 630)

Included with TomTom GO x30T
g RDS-TMC Traffic Receiver
Included with TomTom GO 930 and 930T

h Remote control

Before You Start.

Switching on and off

To switch your TomTom GO on or off, press and hold the On/Off button for 2 seconds. The first time you switch on, it may take a short while for your device to start. Note: In rare cases, your GO may not start correctly. If this happens, press the reset button, then switch on the device again.

Setting up

To set up your TomTom GO you need to answer a few questions by tapping the screen. Important: Take care to select the correct language, since the language you choose will be used for all menus and written instructions.

Battery notes

We recommend that you fully charge your TomTom GO the first time that you connect it to your computer. It takes up to 2 hours to charge the battery completely. When you place your GO in the Home Dock or use the USB cable to connect to your computer, you are asked if you wish to connect to the computer. If you select No, the device will switch off if you do not tap the screen for three minutes. This happens so that the battery can recharge at a faster rate. For information on connecting to your computer, see Using TomTom HOME on page 94. Note: Your TomTom GO uses a small amount of battery power to remember the last screen being shown when the device is switched off. If you do not charge your GO for a prolonged period of time, the next time you start your GO it will show the default starting screen. All other device settings will still be maintained.

Improving reception

If your TomTom GO takes longer than 5 minutes to find your current position, make sure that the device is in an open space away from tall objects such as buildings or trees.
When you connect your TomTom GO to your computer, you can use TomTom HOME to download information about GPS satellite positions during the next 7 days. This helps your GO to find your position faster. Important: Some vehicles have heat reflective shielding in the windshield. This may prevent your GO from locating your current position. The TomTom External Antenna Kit (available for purchase as an accessory) can help to improve reception.

Windshield mount

Use the windshield mount to install your TomTom GO inside your car. To attach the mount, press the suction cup firmly to the windshield in your car, in an area of the windshield where the glass is flat. Make sure that both the holder and your windshield are clean and dry before you attach the mount. Place the mount so that it does not interfere with your view of the road.

Home Dock / USB cable

The Home Dock or USB cable is used for charging your TomTom GO when it is not in the car and for connecting your GO to your computer. When connected to your computer, you can use TomTom HOME to manage your GO. For information about TomTom HOME, see Using TomTom HOME on page 94.

Your GO will look for another route from your current location to your destination. If you decide you would prefer to use the original route after all, tap Recalculate original. Why would I need to do this? Apart from the roads near your position and near your destination, the new route will use totally different roads to reach your destination. This is an easy way of calculating a totally different route. Tap this button if you can see a roadblock or a line of traffic ahead. You then have to choose how much of the route ahead you want to avoid.

Avoid roadblock

Choose from the different options: 100m, 500m, 2000m, 5000m. Your GO will recalculate your route avoiding the section of the route for the distance you selected. Dont forget that once a new route is calculated, you may have to turn off the road you are on very soon. If the roadblock suddenly clears, tap Recalculate original to return to your original route.
Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way.

Travel via.

You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example, Address, Favorite, Point of Interest and Point on map. Your GO will calculate a new route to your destination that passes the location you chose. Using this button, you can only travel via one location. If you want to pass more than one, use an Itinerary. For more information, see Itinerary planning on page 42. Tap this button to return to the original route without deviations to avoid roadblocks or traveling via particular locations.

Recalculate original

Tap this button to avoid a part of the route. Use this button if you see that your route includes a road or junction you dont like, or which is wellknown for traffic problems.

Avoid part of route

You then choose the road you want to avoid from a list of the roads on your route. Tap this button to recalculate your route so that it avoids traffic problems as much as possible. Your GO will check if there are any traffic problems on your route and work out the best route to avoid the problems.

Minimize traffic delays

For more information about using TomTom Traffic, see TomTom Traffic on page 74.

Cursor button

You can use the map to find addresses and Points of Interest (POIs), for example, restaurants, train stations and gas stations.
Tap the cursor button then tap one of the following buttons: Tap this button to navigate to the cursor position. Your GO will calculate the route.

Navigate there

Tap this button to find a POI near the cursor position. For example, if you have found a restaurant to go to, you can search for a parking garage nearby.

Find POI nearby

Tap this button to call the location at the cursor position. This button is only available if your GO has the phone number for the location.
The phone numbers of many POIs are stored in your GO. If you enter phone numbers for POIs that you create, you can also call them. For more information about hands-free calling, see Hands-free calling on page 45. Tap this button to create a Favorite at the cursor position. For more information about Favorites, see Favorites on page 31.

Add as Favorite

Tap this button to create a POI at the cursor position. For more information about POIs, see Points of Interest on page 37.

Add as POI

Tap this button to correct the location shown at the cursor position.

Correct location

Points of Interest
Points of Interest or POIs are useful places on the map. Here are some examples: Restaurants Hotels Museums Parking garages Gas stations

Showing POIs on the map

1. Tap Show POIs on map in the Preferences menu.

Show POI on map

2. Select the POI categories to display on the map. Tap Find to search for a POI by name. 3. Tap Done. The POIs you have selected are shown as symbols on the map.

Calling a POI

Your TomTom GO knows the phone numbers for many POIs. You can, for example, call a restaurant to book a table. For information about using your TomTom GO for hands-free calling, see Hands-free calling on page 45.

Navigating to a POI

You can use a POI as your destination. For example, if you are traveling to an unfamiliar city, you could choose a POI to help find a parking garage. 1. Tap the screen to bring up the main menu. 2. Tap Navigate to. in the Main Menu. 3. Tap Point of Interest. 4. Tap POI in city. 5. Narrow your choice of POIs by selecting the area where the POI is located.
You can select one of these options: POI near you - to choose from a list of POIs near to your current location. POI in city - to find a POI in a particular town or city. POI near Home - to choose from a list of POIs near to your Home location. You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options: POI along route POI near destination 6. Type the name of the town you want to visit and select the town when it appears in the list. 7. Tap Parking garage. 8. Select the category of POI: Tap Any POI category to search for a POI by name. Tap the category of POI, if it is shown. Tap the arrow to choose from the complete list of categories. Select the category from the list or start to type the name of the category and select it when it appears in the list. 9. Select a parking garage. The distance listed next to each POI is the distance from the city center. 10.From the list of POIs shown, select the POI you want to navigate to. The table below explains the distances listed next to each POI. POI near you POI in city POI near Home POI along route POI near destination Last POI Distance from your current location Distance from the city center Distance from your Home location Distance from your current location Distance from your destination Distance to the last POI you visited

If you know the name of the POI, tap Find and type the name. Select it from the list when it is shown. 11.Select a parking garage. The distance listed next to each POI is the distance from the city center. Once you have selected a POI, the route to the POI is calculated by your TomTom GO. The route to the POI is then calculated by your TomTom GO.

Managing POIs

Tap Manage POIs from the Preferences menu.

Manage POIs

Note: The Manage POIs button is only available when all menu buttons are shown. To show all menu buttons, tap Show ALL menu options in the Preferences menu. You can, for example, do the following: Create your own POI categories and add POIs to them. Set warnings when you get close to POIs. Why would I want to create my own POIs? A POI acts like a shortcut - once you have saved a location as a POI you never have to type the address of that POI again. But when you create a POI you can save more than just the location. Phone number - when you create a POI, you can save a phone number with it. Categories - when you create a POI you have to put it in a category. For example, you could create a category of POIs called Favourite restaurants. With each POI, save the phone number so that you can call them from your GO to reserve a table.
How can I create my own POIs?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences. 3. Tap Manage POIs. 4. Before you can add a POI, you have to create at least one POI category. Every POI is assigned to a POI category. You can only add POIs to POI categories you have created yourself. Tap Add POI category.

Add POI category

5. Enter a name for your POI category, for example, Friends or Favourite restaurants. Then select a marker for your POI category. 6. Tap Add POI. Tap this button to add a POI.

Add POI

7. Select the POI category in which you want to add the POI.
8. Select the location of your POI from the list below. You can set your Home location as a POI. If you want to change your Home location, you can create a POI of the Home location before you change it.
You can create a POI from a Favorite. You can only create a limited number of Favorites. If you want to create more Favorites you have to delete some Favorites first. Before you delete a Favorite, make it into a POI so that you dont lose the address. You can specify an address to be a POI. When you enter an address, you can choose from four options. City center Street and house number ZIP code Crossing or intersection Select a POI location from a list of places you have recently used as destinations.

You can add a Point of Interest (POI) as a POI. For example, if you are creating a category of POIs for your favourite restaurants, use this option instead of entering the addresses of the restaurants.
Tap this button to add your current position as a POI. For example, if you stop somewhere you like, while you are there you can tap this button to create the POI.
Tap this button to create a POI using the map browser. Select the location of the POI using the cursor, then tap Done.
For more information about the map browser, see Driving View on page 6 and How can I create my own POIs? on page 39 Tap this button to create a POI by entering latitude and longitude values.
Tap this button to make a POI of the current position of a TomTom Buddy. For more information about TomTom Buddies, see TomTom Services on page 65.
Tap this button to select your last recorded position as your destination.
This may be useful if your GO is unable to maintain a strong GPS signal, for example, when you drive through a long tunnel. For more information about the GPS, see Global Positioning System (GPS) on page 93.
How can I set warnings for POIs?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences. 3. Tap Manage POIs. Note: The Manage POIs button is only available when all menu buttons are shown. To show all menu buttons, tap Show ALL menu options in the Preferences menu. 4. Tap Warn when near POI. Tap this button to receive a warning when you travel near to the location of a POI.

Warn when near POI

5. Select the category of POI you want to be warned about. Select the category from the list or start to type the name of the category and select it when it is shown in the list. 6. Set how close the POI should be when you receive a warning. 7. Choose the warning sound for the category of POI you selected.

Itinerary planning

What is an Itinerary?
An Itinerary is a plan for a trip including more locations than your final destination. An Itinerary can include the following items: Destination - a location on your trip where you want to stop. Waypoint - a location on your trip you want to travel through without stopping. Heres an example of an Itinerary:
Destinations are shown using this symbol. Waypoints are shown using this symbol.
When would I use an Itinerary?
You could use an Itinerary for trips such as: A road trip through a country with lots of stops. A two day car trip with an overnight stop. A short drive which passes by Points of Interest. In all these examples you could tap Navigate to. for each place. However, if you use an Itinerary, you can save time by planning everything in advance.

Creating an Itinerary

1. Tap the screen to bring up the main menu. 2. Tap Itinerary planning.
The Itinerary planning screen opens. At first, there are no items on the Itinerary.
Note: This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. 3. Tap Add and select a location. Tip: You can add items to your Itinerary in any order and rearrange the order later.

Start Using an Itinerary

Tap Options, then tap Start navigation. To save an Itinerary, tap Save Itinerary. To load a saved Itinerary, tap Load Itinerary. To create a new Itinerary, tap New Itinerary and to delete one, tap Delete Itinerary.

Following an Itinerary

When you use an Itinerary to navigate, the route will be calculated to the first destination on the Itinerary. Your TomTom GO calculates the remaining distance and time to the first destination and not for the whole Itinerary. As soon as you start to use an Itinerary, the route is calculated from your current position. You do not need to set a departure point. When you have passed a waypoint or reached a destination, it is marked as visited. Waypoints are shown on the map. Your GO will not warn you when you are approaching a waypoint or when you arrive at a waypoint.

Managing an Itinerary

Tap an item on your Itinerary to open a menu of buttons for editing the item. The buttons shown below are available. You can change a destination into a waypoint using this button. Waypoints are locations you want to pass through on your way to your chosen destination(s). Destinations are locations where you want to stop. This button is only shown if the item you tapped is a destination.

Mark as waypoint

You can change a waypoint into a destination using this button. Waypoints are locations you want to pass through on your way to your chosen destination(s). Destinations are locations where you want to stop. This button is only shown if the item you tapped is a waypoint. Tap this button to miss out part of your Itinerary. Your GO will ignore this item and all the items before it in the Itinerary.

Making a Call

Once you have established a connection with your phone, you can start making calls. 1. Tap Mobile phone in the Main Menu. 2. Tap Call. Note: Make sure that your phone is currently selected. The current phone is shown at the bottom of the screen. 3. Tap Number to enter a number to call. 4. Do one of the following: Tap Home to call your Home location. If you have not entered a number for your Home location this button is unavailable. To enter a number, tap Change Home number in the Phone preferences menu. Tap Number to enter a number to call. Tap Point of Interest to choose a Point of Interest (POI) to call. If your GO knows the phone number of a POI, this is shown next to the POI. Tap Phonebook entry to select a contact from your phonebook. Note: If you have not copied your phonebook to your TomTom GO, the button Phonebook entry is unavailable. Tap Recently dialed to select from a list of people or numbers you have called recently using your GO. Tap Recent caller to select from a list of people or numbers who called you recently. Only calls you have received on your GO are saved in this list. For information about POIs, see Points of Interest on page 37.

Receiving a Call

If someone calls you while you are driving, accept or reject the call by tapping the screen.

Auto-Answer

You can tell your TomTom GO to answer every call automatically after a certain time. Tap Phone preferences in the mobile phone menu, then tap Auto-answer preferences. Select when your TomTom GO will automatically answer your calls.

Sharing your TomTom GO

To add more phones, do the following. You can establish connections for up to 5 mobile phones. 1. Tap Mobile phone in the Main Menu. 2. Tap Connect to your phone.
3. Tap Find other phone. and follow the instructions on the screen. To switch between phones, tap Connect to your phone and then select your phone from the list.
The available buttons are listed below: Tap this button to redial a telephone number using your mobile phone.

REDIAL

Tap this button to read or write a message.

Read/Write message

Tap this button to configre how your TomTom GO communicates with your mobile phone.

Phone preferences

Tap this button to dial a telephone number using your mobile phone.
Tap this button to load the contacts and phone numbers from your mobile phone onto your TomTom GO.
Get phone numbers from phone
Tap this button to manage the mobile phones that will be connected to your TomTom GO. You can add a profile for up to five different mobile phones.

Manage phones

Preferences
You can change the way your TomTom GO looks and behaves. Tap Change preferences in the Main Menu.
Hidden buttons and features
When you first start using your TomTom GO, all the buttons are shown in the menu. The buttons for the more advanced features can be hidden. This is a useful option because you are unlikely to use certain features very often. Tap this button in the Preferences menu, to reduce the number of buttons that are shown. You might want to do this so that only frequently used buttons are shown.

Remaining distance - the distance left until you reach your destination. Current time Arrival time - your estimated arrival time. Speed Direction Show next street name - the name of the next street on your trip. Show current street name Show leeway to arrival time - your GO shows how late or early you will be compared with the preferred arrival time that is set during the planning of a route. Show max speed next to speed - only available when speed (above) is also selected. Show compass How should the status bar be displayed? Horizontal - If you choose this option, the status bar will be shown at the bottom of the Driving view. Vertical - If you choose this option, the status bar will be shown at the right-hand side of the Driving view. Note: If the speed limit for the road you are on is available, it is shown next to your speed. If you drive faster than the speed limit, your speed is shown in red.

Automatic zooming

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to enable or disable automatic zooming in the Driving View.

Quick menu preferences

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to choose up to six buttons to be used in the Quick menu. The Quick menu button enables easy access for your most commonly used buttons.
The buttons you assign for use with the Quick menu, are shown in the Driving View.

Guided tours

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to show one of the Guided tours on how to use your TomTom GO.

Name preferences

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to set the information that is shown on the map in the Driving View. The following options are available: Show house numbers before street names
Show street names - if you are using a computer voice for spoken instructions and have selected that street names should be read aloud, you do not need to select this option, since the street names will be read aloud even though this option is not selected. Show next highway / signpost - when this option is selected, the next major road on your route is shown at the top of the screen in the Driving View. Show current street name on map

Set units

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to set the type of units that will be shown for the following: Distance
Time Latitude and longitude Temperature Air pressure
Operate left-handed / Operate right-handed
This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to move important buttons, for example, the Done and Cancel buttons as well as the zoom bar, to the left hand side of the screen. This makes it easier to tap the buttons with your left hand without blocking the screen.

Operate lefthanded

To move the buttons back to the right hand side of the screen, tap Operate right-handed.

Keyboard preferences

You use the keyboard to enter your destination or to find an item in a list, such as a POI. Tap this button to select the size of the keys on the keyboard and the keyboard layout. You can select from two sizes: Large keyboard Small keyboard Three keyboard layouts are available: ABCD keyboard QWERTY keyboard AZERTY keyboard Note: The keyboard does not include accents of any kind for any language so you dont have to worry about entering letters with accents. Simply type the letter without the accent and your GO will recognize the word.

Planning preferences

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to set the kind of route planned when you select a destination. The following options are available:
Ask me every time I plan Always plan fastest routes Always plan shortest routes Always avoid freeways Always plan walking routes Always plan bicycle routes Always plan for limited speed Then answer the following question: Do you want the route summary screen to close automatically after 10 seconds?

Toll road preferences

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to set how your GO handles toll roads if they are on the route to a destination you set. You can choose from the following options:
Ask me when there are toll roads on my route - you are asked if you want to avoid a toll road whenever you plan a route. Always avoid toll roads Never to avoid toll roads

Set owner

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features on page 48. Tap this button to enter your name and address as the owner of your GO and to change or delete a 4-digit password for your GO.

38 min

2. Tap Minimize traffic delays. Your device looks for the quickest route to your destination. It is possible that the new route may also include traffic delays, or may even be the same route as before. You can re-plan the route to avoid all delays, but this new route will take longer than the quickest route already shown. 3. Tap Done. Tip: You can let your TomTom device automatically minimize traffic delays for you. To do this, see Changing traffic preferences on page 76.
Changing traffic preferences
Use the Change Traffic preferences button to choose how traffic information works on your device. To change your traffic preferences, do the following: 1. Tap the TomTomTraffic button in the Main Menu on your device.
Change Traffic preferences
2. Tap Change Traffic preferences. You can change the following preferences: Automatically minimize delays after every traffic update - if you select this option, your device automatically recalculates your route when new delays occur on your route. Automatically update traffic info while on route - if you select this option, your device automatically updates traffic information whenever you have a route planned. Beep when traffic situation on route changes - if you select this option your device beeps when a new traffic incident occurs on your current route. Ask for traffic updates when preparing a route - if you select this option, your device asks if you want to update traffic information before looking for any delays on routes that you plan. 3. Select or clear the check box next to each preference you want to change. 4. Tap Done. 5. If you chose to automatically update traffic information while on route (one of the options shown above), you are asked if you want to limit how often that information is updated. Tap No to use the default interval of 4 minutes. Tap Yes if you want to change the frequency of your automatic traffic updates. 6. Tap Done.

The Traffic sidebar

The Traffic sidebar shows you the traffic incidents on your route. It shows the following information: A symbol for each traffic incident in the order they occur along your planned route. The estimated delay of the next traffic incident on your route. The distance from your current location to the first incident on the Traffic sidebar. An example of a Traffic sidebar is shown below.

YOUR LEGAL RIGHTS

4) This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state and jurisdiction to jurisdiction. 5) If any part of this Limited Warranty is held to be invalid or unenforceable, the remainder of the Limited Warranty shall nonetheless remain in full force and effect. 6) This Limited Warranty is the only express warranty made to you and is provided in lieu of any other express warranties or similar obligations (if any) created by any advertising, documentation, packaging, or other communications. 7) Except for the Limited Warranty and to the maximum extent permitted by applicable law, TomTom and its suppliers provide the Hardware "AS IS AND WITH ALL FAULTS", and hereby disclaim all other warranties and conditions, whether express, implied or statutory, including, but not limited to, any (if any) implied warranties, duties or conditions of: merchantability, noninfringement, quiet enjoyment, system integration, satisfactory quality, fitness for a particular purpose, reliability or availability, accuracy or completeness of responses, results, workmanlike effort, lack of viruses, and reasonable care and skill, all with regard to the Hardware, and the provision of or failure to provide support or other services, information, software, and related content through the Hardware or otherwise arising out of the use of the Hardware. This exclusion does not apply to (i) any implied condition as to title and (ii) any implied warranty as to conformity with description. If applicable law requires any implied warranties with respect to the Hardware, all such warranties are limited in duration to ninety (90) days. Some states and/or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above may not apply to you. 8) This Limited Warranty cannot be transferred to any other person.

LIMITATION OF LIABILITY

9) Neither TomTom nor its suppliers shall be liable to you or to any third party for any indirect, incidental, consequential, special or exemplary damages (including in each case, but not limited to, damages for the inability to use the equipment or access data, loss of data, loss of business, loss of profits, business interruption or the like) arising out of the use of or inability to use the Hardware even if TomTom has been advised of the possibility of such damages. 10) Notwithstanding any damages that you might incur for any reason whatsoever (including, without limitation, all damages referenced herein and all direct or general damages in contract or anything else), the entire liability of TomTom and any of its suppliers shall be limited to the amount actually paid by you for the Hardware. 11) Notwithstanding the above, neither party's liability for death or personal injury resulting from its own negligence shall be limited. 12) Some states and/or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

C-tick

N14644 Z468 This product displays the C-tick to show it complies with relevant Australian and New Zealand regulations.

A-tick

N14644 Z468 This product displays the A-tick to show it complies with relevant Australian and New Zealand regulations.

Warning for Australia

The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.

This Document

Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom International B.V. Part numbers TomTom GO: 4CH5.000.00, 4CH5.000.01, 4CH7.000.00, 4CH9.000.00

Copyright notices

2008 TomTom International BV, The Netherlands. TomTom and the "two hands" logo are among the trademarks, applications or registered trademarks owned by TomTom International B.V. Our limited warranty and end user license agreement for embedded software apply to this product; you can review both at www.tomtom.com/legal
Data Source 2008 Tele Atlas N.V. Based upon: Topografische ondergrond Copyright dienst voor het kadaster en de openbare registers, Apeldoorn 2008. Ordnance Survey of Northern Ireland. IGN France. Swisstopo. BEV, GZ 1368/2008. Geonext/DeAgostini. Norwegian Mapping Authority, Public Roads Administration / Mapsolutions. DAV. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majestys Stationery Office. Crown copyright and/or database right 2008. All rights reserved. Licence number 100026920.
Text to Speech technology, 2008 Loquendo TTS. All rights reserved. Loquendo is a registered trademark. www.loquendo.com
Apple and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

TomTom GO

a TomTom GO
A B C ./. D E F G ( SD ) H USB I TomTom / RDS-TMC J K b *

J F H G I K E

e - (GO 530, 730, 930)

f USB (GO 630)

* TomTom GO x30 HD Traffic TomTom HD Traffic Receiver.

TomTom GO x30T

g RDS-TMC

TomTom GO 930 930T

TomTom GO x30 HD Traffic
i TomTom HD Traffic Receiver A - B HD Traffic Receiver -
, TomTom GO ./. 2. , . : GO . , .
TomTom GO , . : , .
TomTom GO . 2. GO - USB, , . , , . , . . TomTom HOME . 110. : TomTom GO , . GO , GO . .
TomTom GO 5 , , , .
TomTom GO TomTom HOME GPS 7. GO . : . GO . TomTom ( ).
TomTom GO . , , . , . , .

- / USB

- USB TomTom GO , GO . TomTom HOME , GO. TomTom HOME, TomTom HOME . 110.

TomTom GO

TomTom GO , , . TomTom GO, GO TomTom HOME . 110. GO. GO , . GO. . GO . .
TomTom GO . , . : , GO . .
A + - . B . C , . D . , . E , . F , , . , , . G GPS. H Traffic Traffic, Traffic, TomTom Traffic . I - .
Enhanced Positioning Technology
: Enhanced Positioning Technology TomTom GO Enhanced Positioning Technology EPT GPS, . GO , . EPT GO . GO GPS. GO EPT , EPT. GO EPT GO GPS, EPT EPT .

A EPT. B .

. , . TomTom GO . , GO . : GO GPS-.

5 , .

TomTom GO . : : . . 1. , . : GO , , , . , . , . 2. .
: - , . - , . - , . : . , . . .
- , . - , , GO. . 23. . 4. .
: GO . . , > , . 5. , .
. , , . : , GO. . 23 6. , . , . , , . 7. .
8. GO , . . GO . IQ RoutesTM , . 9. , . GO , , , .
TomTom GO , . , . GO , . , . GO , 30 , , , 30 , ? . , . : 55 . , , . 3 , . , , .

19. , , . , .

, . , . , .

. , , . : , .

, . . 55. , .

. 33. , .

, , .

, (POI).

(POI)

. 39.

, GPS- .
GPS (GPS) . 109. , , .

. 6. , .

, TomTom. , , .

TomTom

TomTom TomTom . 71. , .

GPS (GPS) . 109.

, , , GO : . ., , , .

. 23

GO , . : , . , .
-, , . , : 1. , . 2. , , .
3. , . 4. . 5. , . - , . - . , . - , . - . - . - , . . 6. TomTom GO c .

, . , . : , .

, -.

, . .

, .

. 6. , .

, , - , .
: . , -, . , . , . .
GO . - , . ? . . , . , . : 100, 500, 2000 5000. GO . , , , , . , , .

, , , - .

, , , . : , , , . GO . , . , . . 44. , .

5. , () . 6. TomTom HOME TomTom Map Share. , , .

: . , (), .

vabckc sdn vk fbks sdjv
, : 1. . 2. . 3. , (), . , . 4. 5. . 6. , .

, (POI). , :

1. . 2. . 3. . 4. . , . , . 5. 6. , OK. 7. , , OK. , OK .

, . , (POI):

POI. . (POI). , . . , . . TomTom GO TomTom Map Share . , . , , , , .
: TomTom HD Traffic TomTom Traffic (TMC) : TMC , , , , , , , RDS-TMC. , , . , TomTom ( ).

TomTom HD Traffic

TomTom HD Traffic TomTom . . TomTom HD Traffic TomTom HD Traffic Receiver. : HD Traffic Receiver TomTom GO 530/730/930 HD Traffic. www.tomtom.com , HD Traffic Receiver . HD Traffic TomTom HD Traffic . 98.

TomTom HD Traffic

TomTom HD Traffic, TomTom HD Traffic Receiver TomTom: 1. HD Traffic Receiver .

2. USB .

HD Traffic Receiver , HD Traffic Receiver TomTom HD Traffic Receiver. , HD Traffic Receiver , . HD Traffic Receiver.
TomTom HD Traffic Receiver GPS, , , . . , , , .

TomTom Traffic

TomTom Traffic - TomTom, . : TomTom Traffic . tomtom.com/services, , . TomTom Traffic, (GPRS, EDGE, UMTS, CDMA) TomTom Bluetooth, . tomtom.com/phones TomTom Traffic, : 1. TomTom Traffic . , MyTomTom. 2. Traffic.

TomTom Traffic . 81.

(TMC)
(TMC) . . TomTom, TomTom RDSTMC. TomTom RDS-TMC . : TomTom , . . tomtom.com/rds-tmc, , . RDS-TMC . 89.
TomTom Traffic - TomTom . TomTom Traffic Bluetooth (GPRS, EDGE, UMTS, CDMA). TomTom Traffic . tomtom.com/services

TomTom Traffic

TomTom Traffic TomTom. , , , : 1. TomTom Traffic . 2. Traffic. : TomTom Traffic . Bluetooth- , . 3. . Traffic , TomTom.

Traffic : .

15. 30. 45. . TomTom .
: , , , Traffic.
, , Traffic . Traffic . Traffic Traffic . 84. , 20 , , , 38. , :
1. Traffic. : Traffic Traffic , .
2. . . , . , , , , . 3. . : TomTom . . 83.
Traffic, . Traffic, : 1. TomTom Traffic .

Traffic

2. Traffic. : - , , . - , . - , , . - , , . 3. , . 4. . 5. ( , ), , . , 4. , . 6. .
Traffic . : . . Traffic. Traffic .
Traffic , . - , 15 , 51. Traffic, TomTomTraffic, . TomTom Traffic . 82.
- - Traffic . , , , . -, , : 1. TomTomTraffic . 2. -.
3. - 4. . 5. . - - -. : , , , , . , , , . , , / .

TomTom HOME

TomTom HOME - , : , , (POI) . TomTom. TomTom . TomTom, . . . .
TomTom HOME , : 1. - USB. 2. , . 3. TomTom - . TomTom HOME . TomTom HOME CD, TomTom -. tomtom.com/home TomTom HOME , TomTom .
TomTom HOME " " TomTom HOME.

MyTomTom

TomTom HOME, MyTomTom , . TomTom HOME .
(GPS) (GPS) - , . , . GPS TomTom. TomTom GPS. TomTom, . , . TomTom. -. . , , , , , 60 C (140 F). - , , . , . , , . , 0 C/32 F 45 C/ 113 F. : : -10 C (14 F) +55 C (131 F); : -20 C (-4 F) + 60 C (140 F); : -20 C (-4 F) +25 C (77 F). - . TomTom (
/ ) ( ) . TomTom TomTom.

CE , , .

R&TTE
GO 530, 630,730, 930 www.tomtom.com/lib/doc/CE DoC__GO920.pdf www.tomtom.com/lib/doc/CE DoC_GO Remote.pdf TomTom HD Traffic Receiver www.tomtom.com/lib/doc/hdtreceiver/Document.pdf TomTom , , , 1999/5/EC. -, .
, . 2002/96/EC (WEEE), . .

FM-

: AT, BE, CH, CZ, DE, DK, EE, ES, FI, GB, HU, LI, LT, LU, NL, NO, PL, PT, RU, SE, TR, UK GO 530, GO 630, GO 730 GO 930 FM-, USB-.
. , . . TomTom , , . . , TomTom International B.V. : TomTom International B.V., 35, 1017 CT, , (Rembrandtplein 35, 1017 CT, Amsterdam, The Netherlands)

Tom-

: , , TomTom International B.V., Rembrandtplein 35, 1017 CT ().
1) TomTom International B.V. (TomTom) , ( ). TomTom. . , , (6) . , , 1 () , .
2) , , TomTom, , , , , , , , . . , . , . , , , / , .
3) , TomTom www.tomtom.com RMA- ( ). , TomTom, . 180 , TomTom - , . , TomTom .
4) , . - , , , . 5) , . 6) , TomTom , , . , , , , , , , , , . , , , , -, . , , . (1) (2) . 7) . 8) .
9) TomTom, , - ( , , , , - ), , TomTom .
10) , (, , , , - ), TomTom EULA , . 11) TomTom (1) / (2) /. 12) , , . : (499) : www.tomtom.com : www.tomtom.com/legal : TomTom International B.V.; : 35, 1017 CT, ,
, . ., (, ). , , , ,. , , CDROM, , , , ( ). , . , . CD-ROM, , , , . , , ( ) , . / , , ) / ) / . 1) : (), , , . . - , . , , ,
, . 2) : , / , , , / . . , , . () , () . (-) , , - , . , , . 3) : , , , , / . , , - - , , . 4) : , , / . , . 5) : . 2, 3 4, , , . CD/SD/ROM/. . 6) : a) . , / , , / . b) , , , , , , ( ) ,
, , , , , , , . / , , , , / / . , , / . (1) , (2) . ) , , , . 7) : a) , - , , ( , , , , , , - ), / , . ) , (, , , , , , , ), , / . ) (1) / (2) /. ) 7(), () () , , , . 8) : , . . , , , , , , .

9) : , , , . . . 10) : , , , , . , . 11) : ( , / ), , , , , / ( ). , / , . ( ) , . - , , , . 12) : . . 13) : , , / - , . -. (), . - - , www.tomtom.com.

Copyright notices

(C)2008TomTom International BV, TomTom(tm) , TomTom International B.V. . www.tomtom.com/legal. Data Source 2008 Tele Atlas N.V. Based upon: Topografische ondergrond Copyright dienst voor het kadaster en de openbare registers, Apeldoorn 2008. Ordnance Survey of Northern Ireland. IGN France. Swisstopo. BEV, GZ 1368/2008. Geonext/DeAgostini. Norwegian Mapping Authority, Public Roads Administration / Mapsolutions. DAV. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majestys Stationery Office. Crown copyright and/or database right 2008. All rights reserved. Licence number 100026920. Text to Speech technology, 2008 Loquendo TTS. All rights reserved. Loquendo is a registered trademark. www.loquendo.com Apple and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Audible, AudibleListener and Audiblemanager are registered trademarks of Audible, Inc. When purchasing and using Audible content you need to agree to the terms and conditions as posted in the Legal Notices www.audible.com. SoundClear acoustic echo cancellation software Acoustic Technologies Inc. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit mp3licensing.com Some images are taken from NASAs Earth Observatory. The purpose of NASAs Earth Observatory is to provide a freely-accessible publication on the Internet where the public can obtain new satellite imagery and scientific information about our home planet. The focus is on Earths climate and environmental change: earthobservatory.nasa.gov/