TP-link TL-SF1005D Manual
TP-link TL-SF1005D, size: 178 KB
Here you can find all about TP-link TL-SF1005D like review and other informations. For example: .
TP-link TL-SF1005D manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a TP-link TL-SF1005D please write about it to help other people. [ Report abuse or wrong photo | Share your TP-link TL-SF1005D photo ]
TP LINK TL SF1005D Ethernet Swich Video Review
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
RJ45 Ports. All ports can work as the Uplink port, and the Uplink mark under Port 8 can be ignored.
Appendix A: Specifications
General Standards Topology Protocol Data Transfer Rate Network Media (Cable) IEEE802.3 10Base-T, IEEE802.3u 100Base-TX Star CSMA/CD Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex); Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex) 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-STP (maximum 100m) 100BASE-Tx: UTP category 5, 5e cable (maximum 100m) EIA/TIA-STP (maximum 100m) 5/8/16 10/100Mbps Auto-Negotiation ports Power, Link/Act Store-and-Forward Automatically learning, automatically update 10Base-T: 14880pps/Port; 100Base-Tx: 148800pps/Port 10Base-T: 14880pps/Port; 100Base-Tx: 148800pps/Port
Appendix B: Troubleshooting
The Power LED is not lit Make sure the AC power Adapter is plugged into an outlet properly and it's connector is plugged into the power jack of the switch. Make sure the power source is ON. Make sure you are using the TP-LINK power adapter supplied with your switch. The Link/Act LED is not lit when a device is connected to the corresponding port Make sure that the cable connectors are firmly plugged into the Switch and the device. Make sure the connected device is turned on and its adapter is installed correctly and is working. The cable must be less than 100 meters (328 feet).
Figure 3-2 TL-SF1008D Switch Rear Panel sketch
The LED indicators include Power LED and Link/Act LEDs. The LED indicators are used for monitoring and troubleshooting of the Switch. The following section shows the LED indicators for the Switch along with an explanation of each indicator.
Number of Ports LED indicators Transfer Method MAC Address Learning Frame Filter Rate Frame Forward Rate
TL-SF1005D TL-SF1008D TL-SF1016D
10/100Mbps Fast Ethernet Switch
Figure 3-3 TL-SF1008D Switch LEDs sketch
Power LED: This indicator will light up when the Switch powers up. If the LED is not lit, please check the power adapter and connection. LINK/ACT LEDs: These LEDs indicate Link/Active status. One LED indicator will light green when a device is connected to the corresponding port. It flashes when data is being transmitted or received on the connection.
Environmental and Physical Dimensions 5.5 3.3 1.2 (140mm 85mm 30mm) (W D H) (TL-SF1005D/TL-SF1008D) 11.2 4.6 1.1 (285mm 116mm 28mm) (TL-SF1016D) Power Supply AC12V~ 0.35A for TL-SF1005D Output AC9V~ 0.8A for TL-SF1008D AC9V~ 1.2A for TL-SF1016D Operating Temperature 0 ~40 (32 ~104 ) Storage Temperature -40~70 (-40 ~158 ) Operating Humidity 10%~90% non-condensing Storage humidity 5%~95% non-condensing
Appendix C: Contact Information
For help with the installation or operation of the TP-LINK TLSF1005D/TL-SF1008D/TL-SF1016D Switch, please contact us. E-mail: email@example.com Website: http://www.tp-link.com
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright 2005 TP-LINK Technologies Co., Ltd. All rights reserved.
Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
The following contents should be found in your box: One TL-SF1005D/TL-SF1008D/TL-SF1016D Switch One AC power Adapter This User's Guide Wall-mounting screws Note: If any of the above contents is damaged or missing, please contact the retailer from whom you purchased the TLSF1005D/TL-SF1008D/TL-SF1016D Switch for assistance.
transfer. Its wire-speed switching that forwards packets can be as fast as the speed that your network delivers those packets to them.
After the Switch powers up, it will be automatically initialised and the LED indicators should respond as follows: 1) 2) All of the Link/Act LED indicators will flash momentarily, which represent a resetting of the system. The Power LED indicators will light up.
Complies with IEEE802.3, IEEE802.3u standards 5/8/16 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX Supports IEEE802.3x flow control for Full Duplex mode and backpressure for half-duplex mode Supports MAC address auto-learning and auto-aging LED indicators for monitoring power, link, activity Plastic case, desktop or wall-mounting design External Power Adapter supply
EC DECLARATION OF CONFORMITY (EUROPE)
In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, the Switch meets the requirements of the following standards: EN55022 EN55024 EN60950
Chapter 3: Identifying External Components
This Chapter describes the front panel, rear panel and LED indicators of the Switch. The sketches of the front panel, rear panel and LED indicators are very similar to the TL-SF1005D, TL-SF1008D and TL-SF1016D models. The following sketches are for TL-SF1008D.
The Switch has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Chapter 1: Introduction
1.1 Overview of the product
TL-SF1005D/TL-SF1008D/TL-SF1016D 5/8/16-port 10/100Mbps Fast Ethernet Switch provides 5/8/16 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. The Switch is Plug-and-Play and each port can be used as general ports or Uplink ports and can be simply plugged into a server, a hub or a switch, using straight cable or crossover cable. The TP-LINK TL-SF1005D/TL-SF1008D/TL-SF1016D 5/8/16port 10/100M Fast Ethernet Switch provides you with a low-cost, easy-to-use, high-performance, seamless and standard upgrade to improve your old network to a 100Mbps network. It will boost your network performance up to full duplex data
INDUSTRY CANADA (CANADA)
This Class B digital apparatus (the 5-port/8-port Switch) complies with Canadian ICES-003. Cet appareil num rique de la classe B est conforme NMB-003 du Canada. la norme
Chapter 2: Installation
To install the Switch, please follow these steps: 1. 2. 3. You can place the Switch on a flat table or a vertical wall if you want to hang the Switch. Please inspect the Power Adapter carefully, and make sure that it is properly connected to a power source. Be sure to leave enough space for heat dissipation and good ventilation in the Switch. Do not place heavy objects on the Switch.
3.1 Front Panel
The front panel of the TL-SF1008D consists of several LED indicators.
Caution: Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Figure 3-1 TL-SF1008D Switch Front Panel sketch
3.2 Rear Panel
The rear panel of the TL-SF1008D consists of 8 10/100Mbps
Siewert & Kau Computertechnik GmbH Walter-Gropius-Str. 12a DE 50126 Bergheim Telephone: 02271 - Fax: 02271 - E-Mail: firstname.lastname@example.org Internet: http://www.siewert-kau.com
Switch, 5 x 10/100, desktop
TL-SF1005D 5-port 10/100Mbps Fast Ethernet Switch provides 5 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. The Switch is Plug-and-Play and each port can be used as general ports or Uplink ports and can be simply plugged into a server, a hub or a switch, using straight cable or crossover cable.The TP-LINK TL-SF1005D 5-port 10/100M Fast Ethernet Switch provides you with a low-cost, easy-to-use, high-performance, seamless and standard upgrade to improve your old network to a 100Mbps network. It will boost your network performance up to full duplex data transfer. Its wire-speed switching that forwards packets can be as fast as the speed that your network delivers those packets to them. General information
TP-Link Category Article number Hubs & Switches 499516 TL-SF1005D
Product Description Device Type Enclosure Type Form Factor Ports MAC Address Table Size Ports Qty Features Data Transfer Rate Compliant Standards Data Link Protocol Power Communication Mode Dimensions (WxDxH)
TP-Link TL-SF1005D - switch - 5 ports - desktop Switch - 5 ports Desktop External 5 x 10/100 1K entries 5 x Ethernet 10Base-T, Ethernet 100Base-TX Auto-negotiation, auto-uplink (auto MDI/MDI-X), store and forward 100 Mbps IEEE 802.3, IEEE 802.3u, IEEE 802.3x Ethernet, Fast Ethernet ( 50/60 Hz ) Half-duplex, full-duplex 14 cm x 8.5 cm x 3 cm
More detailed technical specifications
General Device Type Enclosure Type Width Ports Depth MAC Address Table Size Height Features Compliant Standards Status Indicators Networking Ports Qty Data Transfer Rate Data Link Protocol Connectivity Technology Communication Mode Switching Protocol MAC Address Table Size Status Indicators Features Compliant Standards Expansion / Connectivity 5 x Ethernet 10Base-T, Ethernet 100Base-TX 100 Mbps Ethernet, Fast Ethernet Wired Half-duplex, full-duplex Ethernet 1K entries Link activity, power Auto-negotiation, auto-uplink (auto MDI/MDI-X), store and forward IEEE 802.3, IEEE 802.3u, IEEE 802.3x Switch - 5 ports Desktop 14 cm 5 x 10/100 8.5 cm 1K entries 3 cm Auto-negotiation, auto-uplink (auto MDI/MDI-X), store and forward IEEE 802.3, IEEE 802.3u, IEEE 802.3x Link activity, power
Interfaces Power Power Device Voltage Required Miscellaneous Width Depth Height Compliant Standards Environmental Parameters Min Operating Temperature Max Operating Temperature Humidity Range Operating
5 x 10Base-T/100Base-TX - RJ-45
Power adapter - external ( 50/60 Hz )
14 cm 8.5 cm 3 cm CE, FCC
0 C 40 C 10 - 90%
Siewert & Kau take no accountability nor guarantee that all information contained on these pages is current and complete.
LH-D6430D 1050SW PMC-D305L 3070BD Deluxe SX2442FX Sho-2008 TL-WN851N Shadows Easyshare Z612 SLV3220-00 TH-42PWD8 W6400 Sport KDL-20S2500 SUB-zero 511 42LG10R Phaser 360 EN 1 VT 6032 EC 150 FM620X Iloft CTK-520L Impressa 5000 VSX-1018AH-s -K Cafetiere DA-78HR SPP-A900 Server KX-TG1311NL AD-1130W Combat CLX-6200FX XEU SA-9900 S Tomb DDX3216 JR Function Itrip AP-31 Player N200 KM 542 Refrigerator 22 CX1500 HK6300 ML-3051ND 1230 F Series LX-U250A 400SI VMX 100 PD-M430 Kodak C703 KDC-W534uaug Digital - E LQ-570E ECM909A 42PC1RR GR-DVM96u-gr-dvm96 Roland FR-1 CHT-8Q GT110 110-5501 TOP HCD-EC70 AMH-12000E Fryer EW1200I Sata3 Raid Pathfinder-1998 Acoustics GT40 DP-500 CDC-697 DRM-2001G HP4641 Colosseum Tonearm F1DG102U Yamaha DTR2 Digitech DF7 ANT 515 2-krossfire Calculator Travelmate-C210 Feurio Imagemixer VCD DAC-10 SV-671F MHC-GTZ2 CQ-RX102N TT-R250-2000 81920 FL-R900K Plugin LS 6200 SA260 AF-S125NX CDX-P25 HBB73C520F
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101