108M Wireless Access Point TL-WA601G
Adopts 2x to 3x eXtended Range and 108M Super G technology, Much faster and further than ordinary 11g products
Supports multiple operating modes (Access Point, Client, Universal/ WDS Repeater, Wireless Bridge)
Advanced wireless encryption ensures data security

Description

The TL-WA601G is a 108M wireless access point compliant with 802.11b and 802.11g standards. It provides the access from the wireless station to wired LAN and vice versa; It can also be used to extend the wireless range. If you find the signal of your wireless router is not strong enough to cover your entire house or office, you can use the TL-WA601G as a repeater to repeat the wireless signal from your wireless router to the APs location; To build a wireless connection between two buildings, you can use two of this access points to work as a bridge. With so many different functions such as AP, AP Client, AP + Bridge, Bridge, and Universal / WDS Repeater, the TL-WA601G is ideal for a diverse number of complex network environments.

www.tp-link.com

Specifications
Standards Interface Wireless Signal Rates With Automatic Fallback Frequency Range Wireless Transmit Power Antenna Modulation Technology IEEE 802.11g, IEEE 802.11b 1 10/100M auto-sensing LAN Port Super G : 108M 11g: 54/48/36/24/18/12/9/6M(dynamic) 11b: 11/5.5/2/1M(dynamic) 2.4-2.4835GHz 20dBm(Max) 3dBi detachable Omni directional antenna IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM 108M: -68dBm@10% PER 54M: -68dBm@10% PER Receiver Sensitivity 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER 256K: -105dBm@8% PER Power Supply Unit Operating temperature Storage temperature Relative humidity Storage Humidity Dimensions Input: localized to country of sale Output: 9VAC / 0.8A linear PSU 0C~40C (32F~104F) -40C~70C (-40F~158F) 10% ~ 90%, non condensation 5%~95% non-condensing 6.24.31.3 in. 15811032 mm

Features

Supports 108/54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps wireless LAN data transfer rates Adopts 2x to 3x eXtended Range and 108M Super G wireless LAN transmission technology Provides 64/128/152-bit WEP encryption security, WPA/WPA2 and WPA-PSK/WPA2-PSK authentication and TKIP/AES encryption security, Supports MAC address filtering Built-in DHCP server supporting dynamic IP address distributing Supports multiple operating modes (Access Point, Client, Repeater, Point to Point, Point to Multi-point) Supports Traffic statistics Supports firmware web-site upgrade, Web-Site management Detachable Antenna (reverse SMA connector)

Diagram:

Wired Wireless

Package:

Internet
- 108M Wireless Access Point TL-WA601G - 3dBi detachable Omni directional antenna - Power supply unit (localized to country of sale) - Resource CD - Quick Setup Guide
108M Wireless USB Adapter

TL-WN620G

TL-WN610G
108M Wireless Cardbus Adapter

TD-8810

ADSL2+ Router

Related Products:

AP Mode

TL-WA601G

Repeater Mode
108M Wireless PCI Adapter

TL-WN651G

108M Wireless Router TL-WR641G 108M Wireless PCI Adapter TL-WN651G External ADSL2+ Router TD-8810 SOHO Cable/DSL Router TL-R460
Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificationsmay be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
Copyright 2009 TP-LINK Technologies Co., Ltd. All rights reserved.

3.6 3.7

Wireless Advanced Settings... 25 System Tools.... 26
3.7.1 3.7.2 3.7.3 3.7.4 Firmware....26 Factory Defaults....27 Reboot....28 Password....28

Log.....29

Appendix A: Glossary.... 31 Appendix B: Specifications... 33 Appendix C: FAQ.... 34 Appendix D: Contact Information... 35

TL-WA601G

108M Wireless Access Point User Guide

Chapter 1 Introduction

1.1 Product Overview
Thank you for choosing the TL-WA601G 108Mbps Wireless Access Point. This AP provides connectivity between Ethernet wired networks and radio-equipped wireless devices. It adopts 108M Super G WLAN Transmission Technology, which offers the highest throughput performance available on the market today, and data rates of up to 108Mbps. In dynamic 108M mode, the router can attach IEEE 802.11b, 802.11g and 108Mbps Super G devices at the same time in an integrated environment. It adopts 2x to 3x eXtended Range WLAN transmission technology so that transmission distance is 2-3 times of traditional IEEE 802.11g and IEEE 802.11b solutions, up to 855.36m tested in China. The transmission range is extended to 4-9 times. It is an easy, web-based setup for installation and management. Even though you may not be familiar with the AP, this guide will make configuring the AP easy. Before installing the AP, please look through this guide to get to know all the APs functions.

Main Features

Complies with IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u standards Adopts 2x to 3x eXtended Range and 108M Super G wireless LAN transmission technology. Supports 108/54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps wireless LAN data transfer rates Provides 64/128/152-bit WEP encryption security Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication and TKIP/AES encryption security Built-in DHCP server supporting dynamic IP address distributing Supports MAC address filtering Supports multiple operating modes (Access Point, Client, Repeater, Point to Point, Point to Multi-point) Supports TCP/IP, DHCP, SNMP Supports Traffic statistics Supports firmware upgrade Supports Remote and Web management

Overview the User Guide

Introduction Hardware Installation Guide Software Installation Guide Appendix 1
Chapter 1: Chapter 2: Chapter 3: Chapter 4:

Conventions

The AP or TL-WA601G, or device mentioned in this User guide stands for TL-WA601G 108M Wireless Access Point without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation. You can set the parameters according to your demand.
Chapter 2 Hardware Installation

2.1 The Front Panel

Figure 2-1 The LED indicators displayed on the front panel, the status of these LED indicators represent the devices working circs. For details, please refer to 2.1.1 LED Explanation

2.1.1 LED Explanation

Name Power Status Off On Off System On Flashing Off LAN On Flashing WLAN Off Flashing No Power Power on The AP has a hardware error The AP is initialising The AP is working properly There is no device linked to the corresponding port There is a device linked to the corresponding port but no activity There is an active device linked to the corresponding port The Wireless Radio function is disabled The Wireless Radio function is enabled Description

The Back Panel

Figure 2-2 3
TL-WA601G Wireless antenna Factory Default Reset button
There are two ways to reset the AP's factory defaults: Use the Factory Defaults function on System Tools -> Factory Defaults page in the AP's Web-based Utility. Use the Factory Default Reset button: First, turn off the AP's power. Second, press and hold the default reset button then turn on the AP's power, until the system LED lights up (about 3 seconds). Last, release the reset button and wait for the AP to reboot.
Note: Ensure the AP is powered on before it restarts completely. One LAN 10/100Mbps RJ45 port for connecting the AP to hub or switch AC power socket: only use the power adapter supplied with the TL-WA601G 108Mbps Wireless Access Point, use of a different adapter may result in product damage.

System Requirements

Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector A Ethernet broadband router TCP/IP protocol must be installed on each PC Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later 802.11g or 802.11b-compliant devices, such as the TL-WN510G Wireless Adapter
Installation Environment Requirements
Not in direct sunlight or near a heater or heating vent Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the AP Well ventilated (especially if it is in a closet) Operating temperature: 0~40 (32~104) Operating Humidity: 10%~90%RH, Non-condensing

Connecting the Device

Figure 2-3 is an example of an infrastructure network incorporating the TL-WA601G. An Infrastructure network contains an access point or a wireless router. For a typical connection of the AP, please do the following: 1. 2. 3. You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office). Consult with your Cable or DSL provider for proper installation of the modem. Connect the Cable or DSL modem to a Router. Quickly install the router. Locate an optimum location for the AP. The best place is usually near the center of the area in which your PC(s) will wirelessly connect. The place must accord with the Installation Environment Requirements. 4

TL-WA601G 4. 5. 6.

Adjust the direction of the antenna. Normally, upright is a good direction. Connect the Ethernet Broadband Router to the TL-WA601G AP. Power on the AP. If you are connecting a desktop PC or laptop to your network, install the TP-LINK Wireless Adapter on the PC.
Figure 2-3 The Example of Infrastructure Network Incorporating the TL-WA601G

Configure PC

After connecting the TL-WA601G AP into your network, you should configure it. The default IP address of the TL-WA601G 108Mbps Wireless Access Point is 192.168.1.1, and the default Subnet Mask is 255.255.255.0. These values can be seen from the LAN. They can be changed as you desire, as an example we use the default values for description in this guide. Connect the local PCs to the LAN ports on the AP. There are then two means to configure the IP address for your PCs. 1. From the Start menu on your desktop, go to Settings, and then click on Network Connections.
Figure 2-4 2. In the Network Connections window, right-click on LAN (Local Area Connection), then click Properties.

Figure 3-1 Login to the AP After a moment, a login window will appear similar to that shown in Figure 3-2. Enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter key.
Figure 3-2 Login Windows Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. After your successful login, you can configure and manage the AP. There are six main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. The six main menus are: Status, Network, Wireless, DHCP, Wireless Advanced Settings and System Tools. On the right of the web-based utility, there are the detailed explanations and instructions for the corresponding page. To apply any settings you have altered on the page, please click the Save button. 9
There are the detailed explanations for each web page's key functions below.

Status

The Status page displays the AP's current status and configuration. All information is read-only. Network This field displays the current settings or information for the Network, including the MAC address, IP address and Subnet Mask. Wireless This field displays basic information or status for wireless function, including Operating Mode, SSID, Channel, Mode, MAC Address and IP Address. Traffic Statistics This field displays the AP's traffic statistics. System Up Time The time of the AP running from it's powered on or reset.

Figure 3-3 AP Status 10

Network
You can configure the IP parameters of Network on this page.
Figure 3-4 Network Type - Choosing dynamic IP to get IP address from DHCP server, or choosing static IP to config IP address manually. IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default: 192.168.1.1). Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Gateway - The gateway should be in the same subnet as your IP address. MAC Address - the physical address of the AP, as seen from the LAN. The value can't be changed. Note: If you change the IP Address, you must use the new IP Address to login the AP. If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the DHCP sever will not take effect, until they are re-configured.

Wireless

Figure 3-5 The Wireless menu There are four submenus under the Wireless menu (shown in Figure 3-5): Basic Settings, Security Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

Repeater - A wireless repeater is an AP with its own BSSID that relays data to a root AP, to which it is associated. The wireless repeater relays signal between its stations and the root AP for greater wireless range. Please input the MAC address of root AP in the field of MAC of AP.
Universal Repeater - Without WDS, more APs can be communicated with in this mode.
Note: If the available AP cant support with WDS, you may select Client mode without WDS or Universal Repeater mode to associate with the AP. Here is an example of how to configure wireless repeater. Please do the following: 1. Configure the Operating Mode of the TL-WA601G Access Points. 13
Configure AP1 on LAN Segment 1 in Access Point mode. Configure AP2 in Repeater mode with the MAC address of its root AP (AP1). Configure AP3 in Repeater mode with the MAC address of its root AP (AP2).
Figure 3-7 Wireless repeating
Verify the wireless security parameters for all access points, if any. Verify connectivity across the LANs. A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three WLAN segments. Note:
You can extend this repeating by adding up to 2 additional TL-WA601Gs configured in repeater mode. However, since Repeater configurations communicate in half-duplex mode, the bandwidth decreases as you add Repeaters to the network. Also, you can extend the range of the wireless network with wireless antenna accessories. Bridge (Point to Point) - This mode bridges the AP and another AP also in bridge mode to connect two wired LANs. Please input the MAC address of the other AP in the field of MAC of AP. Here is an example of how to configure Point-to-Point Bridge. Please do the following:
Figure 3-8 Point to Point Bridge 1. 2. Configure the TL-WA601G (AP1) on LAN Segment 1 in Point-to-Point Bridge mode. Configure the TL-WA601G (AP2) on LAN Segment 2 in Point-to-Point Bridge mode. AP1 must have AP2s MAC address in its MAC Address field and AP2 must have AP1s MAC address in its MAC Address field. Configure and verify the following parameters for both access points: 14

Both use the same Channel, and security settings if security is in use. Verify connectivity across the LAN 1 and LAN 2. A computer on either LAN segment should be able to connect to the Internet or share files and printers of any other PCs or servers connected to LAN Segment 1 or LAN Segment 2.
Bridge (Point to Multi-Point) - This mode bridges the AP and up to 4 APs also in bridge mode to connect two or more wired LANs. Please input the MAC address of other APs in the field of MAC of AP1 to MAC of AP4. Here is an example of how to configure multi-point bridging. Please do the following:
Figure 3-9 Point to Multi-point Bridge 1. Configure the Operating Mode of the TL-WA601G Access Points.
Because it is in the central location, configure TL-WA601G (AP1) on LAN Segment 1 in Point-to-Multi-Point Bridge mode. The MAC addresses of AP2 and AP3 are required in AP1. Configure TL-WA601G (AP2) on LAN Segment 2 in Point-to-Point Bridge mode with the MAC Address of AP1. Configure the TL-WA601G (AP3) on LAN 3 in Point-to-Point Bridge mode with the MAC Address of AP1.
Verify the following parameters for all access points.
All TL-WA601G Access Points use the same Channel, and security settings if any. All Point-to-Point APs must have AP1s MAC address in its AP MAC address field, and AP1 must have all All Point-to-Point APs MAC addresses.
Verify connectivity across the LANs. A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three LAN segments.
Wireless stations will not be able to connect to the TL-WA601G Access Points in the illustration above. If you require wireless stations to access any lan segment, you can add TL-WA601G Access Points configured in Wireless Access Point mode to any LAN 15

TL-WA601G segment. Note:

You can extend this multi-point bridging by adding additional TL-WA601Gs configured in Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of the wireless network with wireless antenna accessories.

3.4.2 Site Survey

After selecting a mode and pressing button Survey, you can view all of APs around you.
Figure 3-10 Site Survey SSID - The SSID of the AP. BSSID - The BSSID of the AP, usually also the MAC address of the AP. Signal - The signal received from the AP. Channel - The channel the AP works in. Security - The AP communicates in privacy. Choose - Choose one AP from list to connect to. Press one of Connect in list to select an AP to connect to. Then the basic settings will show again. You can save settings and reboot to take effective. Note: If wireless is disabled, surveying cant work. And if Access Point mode is selected, there is no reason and no choice to connect to another AP.

3.4.3 Security Settings

You can select one of the following security options:
Figure 3-11 Wireless Securities Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the AP without encryption. It is recommended strongly that you choose one of following options to enable security. WEP - Select 802.11 WEP security.
Type - You can select one of following types: 1) Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station's capability and request. 2) Shared Key - Select 802.11 Shared Key authentication. 3) Open System - Select 802.11 Open System authentication.
WEP Key Format - You can select ASCII or Hexadecimal format. ASCII Format stands for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. WEP Key settings - Select which of the four keys will be used and enter the matching WEP key information for your network in the selected key radio button. These values must be identical on all wireless stations in your network. Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for 17
encryption. "Disabled" means this WEP key entry is invalid. 1) 2) 3) For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters. For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters. For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.
Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. WPA/WPA2 - Select WPA/WPA2 based on Radius Server.
Version - You can select one of following versions, 1) 2) 3) Automatic - Select WPA or WPA2 automatically based on the wireless station's capability and request. WPA - Wi-Fi Protected Access. WPA2 - WPA version 2.

Encryption - You can select either Automatic, or TKIP or AES. Radius Server IP - Enter the IP address of the Radius Server. Radius Port - Enter the port that radius service used. Radius Password - Enter the password for the Radius Server.
WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared passphrase.
Version - You can select one of following versions
1) Automatic - Select WPA-PSK or WPA2-PSK automatically based on the wireless station's capability and request. 2) WPA-PSK - Pre-shared key of WPA. 3) WPA2-PSK - Pre-shared key of WPA2.
PSK Passphrase - You can enter a passphrase between 8 and 63 characters long. Group Key Update Period - Specifiy the group key update interval in seconds. The value can be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page. Note: The AP will reboot automatically after you click the Save button if you have select the Reboot checkbox.

3.4.4 MAC Filtering

The Wireless MAC Filtering for wireless networks are set on this page, Figure 3-12:
Figure 3-12 Wireless MAC address Filtering The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the AP, which depend on the station's MAC addresses. MAC Address - The wireless station's MAC address that you want to access. Description - A simple description of the wireless station. Privilege - Allow means allowing the station to access the AP. Deny means denying the station to access the AP. 64-bit, or 128-bit, or 152-bit means assigning a unique WEP key to access the AP. WEP Key - Specify a unique WEP key (in Hexadecimal format) to access the AP. Status - The status of this entry, either Enabled or Disabled. To disable the Wireless MAC Address Filters feature, keep the default setting, Disable. To set up an entry, click Enable, and follow these instructions: First, you must decide whether the unspecified wireless stations can or cannot access the AP. If you desire that the unspecified wireless stations can access the AP, please select the radio button Allow the stations not specified by any enabled entries in the list to access, otherwise, select the radio button Deny the stations not specified by any enabled entries in the list to access. To Add a Wireless MAC Address filtering entry, click the Add New button. The " Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 3-13:
Figure 3-13 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B. Enter a simple description of the wireless station in the Description field. For example: Wireless station A. Privilege - Selects the privileges for this entry, one of Allow / Deny / 64-bit / 128-bit / 152-bit. WEP Key - If you select 64-bit, 128-bit or 152-bit in the Privilege field, enter any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. For example: 2F34D20BE2. Status - Select Enabled or Disabled for this entry on the Status pull-down list. Click the Save button to save this entry.

2. 3. 4.

To add additional entries, repeat steps 1-6. Note: When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled. To modify or delete an existing entry: 1. 2. Click the Edit or Delete button in the Modify column in the MAC Address Filtering Table. Enter the value as desired in the Add or Modify Wireless MAC Address Filtering entry page, and click the Save button.
You can click the Enable All button to make all the entries effective, click the Disable All button to make all the entries ineffective, click the Delete All button to delete all the entries. Click the Next button to go to the next page and click the Previous button to return to the previous page. For example: If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be able to access the AP, the wireless station B with MAC address 00-0A-EB- 00-07-5F not be able to access the AP, 20
and the wireless station C with MAC address 00-0A-EB-00-07-8A be able to access the AP when its WEP key is 2F34D20BE2E54B326C5476586A, while all other wireless stations cannot access the AP, you should configure the Wireless MAC Address Filtering list following these steps: 1. Click the Enable button to enable this function. 2. Select the radio button: Deny the stations not specified by any enabled entries in the list to access for Filtering Rules. 3. Delete all or disable all entries if there exist any entries already. 4. Click the Add New. button and enter the MAC address 00-0A-EB-00-07-BE in the MAC Address field, enter wireless station A in the Description field, select Allow in the Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and the Return button. 5. Click the Add New. button and enter the MAC address 00-0A-EB-00-07-5F in the MAC Address field, enter wireless station B in the Description field, select Deny in the Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and the Return button. 6. Click the Add New. button and enter the MAC address 00-0A-EB-00-07-8A in the MAC Address field, enter wireless station C in the Description field, select 128-bit in the Privilege pull-down list, enter 2F34D20BE2E54B326C5476586A in the WEP Key field and select Enabled in the Status pull-down list. Click the Save and the Return button. The filtering rules that configured should be similar to the following list: Note: If you select the radio button Allow the stations not specified by any enabled entries in the list to access for Filtering Rules, the wireless station B will still not be able to access the AP, however, other wireless stations that are not in the list will be able to access the AP. If you enable the function and select the Deny the stations not specified by any enabled entries in the list to access for Filtering Rules, and there are not any enable entries in the list, thus, no wireless stations can access the AP.

3.4.5 Wireless Statistics
This page shows MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 3-14 The AP attached wireless stations MAC Address - The connected wireless station's MAC address Current Status - The connected wireless station's running status, one of STA-AUTH / 21
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected Received Packets - packets received by the station Sent Packets - packets sent by the station You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. Note: This page will be refreshed automatically every 5 seconds.
Figure 3-15 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 3-15): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

3.5.1 DHCP Settings

The System can be set up as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the system on the LAN. The DHCP Server can be configured on the page (shown in Figure 3-16):
Figure 3-16 DHCP Settings DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. Start IP Address - This field specifies the first of the addresses in the IP address pool. 192.168.1.100 is the default start address. End IP Address - This field specifies the last of the addresses in the IP address pool. 192.168.1.199 is the default end address. Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed connection to the system with their current dynamic IP Address. Enter the amount of time, in minutes, the user will be "leased" this dynamic IP Address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the AP, default value is 192.168.1.1 Default Domain - (Optional.) Input the domain name of your network. Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your ISP. Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers. Note: To use the DHCP server function of the AP, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the AP reboots.

3.5.2 DHCP Clients List

This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the AP (Figure 3-17):
Figure 3-17 DHCP Clients List Index - The index of the DHCP Client Client Name - The name of the DHCP client MAC Address - The MAC address of the DHCP client Assigned IP - The IP address that the AP has allocated to the DHCP client. Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.
3.5.3 Address Reservation
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings. This page is used for address reservation (shown in Figure 3-18).
Figure 3-18 Address Reservation MAC Address - The MAC address of the PC of which you want to reserve IP address. Assigned IP Address - The IP address of the AP reserved. To Reserve IP addresses: 1. 2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP address in dotted-decimal notation of the computer you wish to add. Click the Save button when finished.
To modify A Reserved IP address: 1. 2. Select the reserved address entry as you desire, and modify it. If you wish to delete the entry, make all of the entry fields blank. Click the Save button.
To delete all Reserved IP addresses: Click the Clear All button. Click the Save button. Click the Next button to go to the next page and Click the Previous button to return the previous page. Note: The function won't take effect until the AP reboots.
Wireless Advanced Settings
You can configure wireless advanced settings on this page.
Figure 3-19 AP Wireless Advanced Settings Disable short preamble - Disable short preamble and use long preamble only. 802.11b mode supports only long preamble and this parameter will be ignored. RTS threshold - RTS/CTS Threshold, the packet size that is used to determine if RTS/CTS should be sent. Fragmentation threshold - The maximum packet size used for fragmentation. Beacon Interval - The interval time between two successive beacons.

System Tools

Figure 3-20 The System Tools menu There are five submenus under the System Tools menu (shown in Figure 3-20): Firmware, Factory Defaults, Reboot, Password, and Log. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

3.7.1 Firmware

The page (shown in Figure 3-21) allows you to upgrade the latest version of firmware for the AP.
Figure 3-21 Firmware Upgrade New firmware versions are posted at www.tp-link.com and can be downloaded for free. If the AP is not experiencing difficulties, there is no need to download a more recent firmware version, unless that version has a new feature that you want to use. Note: When you upgrade the AP's firmware, you may lose its configuration settings, so make sure you write down the AP settings before you upgrade its firmware. To upgrade the AP's firmware, follow these instructions: 1. 2. 3. 4. 5. Download a more recent firmware upgrade file from the TP-LINK website (www.tp-link.com). Run a TFTP Server on a PC on your LAN, and take the file in the TFTP servers path. Type the downloaded file name into the File Name box. Type the IP Address of the PC that runs the TFTP server in the TFTP Servers IP Address field. Click the Upgrade button. Firmware Version - displays the current firmware version. Hardware Version - displays the current hardware version. The hardware version of the upgrade file must accord with the current hardware version. Note: Do not turn off the AP or press the Reset button while the firmware is being upgraded. The AP will reboot after the Upgrading has been finished.

3.7.2 Factory Defaults

This page (shown in Figure 3-22) allows you to restore the factory default settings for the AP.
Figure 3-22 Restore Factory Default Click the Restore button to reset all configuration settings to their default values.
The default User Name: admin The default Password: admin The default IP Address: 192.168.1.1 The default Subnet Mask: 255.255.255.0
Note: Any settings you have saved will be lost when the default settings are restored.

3.7.3 Reboot

This page (shown in Figure 3-23) allows you to reboot the AP.
Figure 3-23 Reboot the AP Click the Reboot button to reboot the AP. Some settings of the AP will take effect only after rebooting, which include:
Change LAN IP Address. (System will reboot automatically) MAC Clone (system will reboot automatically) DHCP service function. Static address assignment of DHCP server. Upgrade the firmware of the AP (system will reboot automatically). Restore the AP's settings to factory default (system will reboot automatically).

3.7.4 Password

This page (shown in Figure 3-24) allows you to change the factory default user name and password of the AP.
Figure 3-24 Password It is strongly recommended that you change the factory default user name and password of the AP. All users who try to access the AP's web-based utility or Quick Setup will be prompted for the AP's user name and password. Note: The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new Password twice to confirm it. Click the Save button when finished. Click the Clear All button to clear all.

3.7.5 Log

This page (shown in Figure 3-25) allows you to query the Logs of the AP.
Figure 3-25 System Log The AP can keep logs of all traffic. You can query the logs to find what happened to the AP. 29
TL-WA601G Click the Refresh button to refresh the logs. Click the Clear ALL button to clear all the logs.

Appendix C: FAQ

1. No lights are lit on the access point. It takes a few seconds for the power indicator to light up. Wait a minute and check the power light status on the access point if the access point has no power. 1) 2) Make sure the power cord is connected to the access point. Make sure the power adapter is connected to a functioning power outlet. If it is in a power strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it is not a switched outlet. Make sure you are using the correct TP-LINK power adapter supplied with your access point.
The LAN light is not lit.
There is a hardware connection problem. Check these items: 1) Make sure the cable connectors are securely plugged in at the access point and the network device (hub, switch, or router). Make sure the connected device is turned on. Be sure the correct cable is used. Use a standard Category 5 Ethernet patch cable. If the network device has Auto Uplink (MDI/MDIX) ports, you can use either a crossover cable or a normal patch cable.
I cannot access the AP with a wireless capable computer.
There is a configuration problem. Check these items:
1) You may not have restarted the computer with the wireless adapter to have TCP/IP changes take effect. Restart the computer. The computer with the wireless adapter may not have the correct TCP/IP settings to communicate with the network. Restart the computer and check that TCP/IP is set up properly for that network. The usual setting for Windows the Network Properties is set to Obtain an IP address automatically. The access points default values may not work with your network. Check the access point default configuration against the configuration of other devices in your network.

Appendix D:

http://www.tp-link.com

Contact Information

For help with the installation or operation of TP-LINK Product, please visit our website.