TP-link TL-WN851N, size: 2.4 MB
TP-link TL-WN851n Installation Guide
TP-LINK - PC Compatible - Wireless N 150 mbps - PCI - Strong Encryption
The TL-WN851N Wireless N PCI Adapter complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, and IEEE 802.11b standards. Wireless transmission rates can reach up to 300Mbps. The PCI card employs MIMO technology and has two external detachable omni directional antennas providing even better wireless performance, transmission rates, stability and coverage. At the same time, CCA technology automatically avoids channel conflicts using its channel selection feature. This product supports 64/128/152-bit... Read more
[ Report abuse or wrong photo | Share your TP-link TL-WN851N photo ]
Haf 932 case with everything inside
User reviews and opinions
|Patricio Robledo||4:37pm on Tuesday, September 14th, 2010|
|Will not work with Windows 7 Bought this to go with my N+ router/modem, but it will not find ANY network in my area.|
|eendebak||12:56am on Saturday, August 28th, 2010|
|TP-Link 300Mbps Wireless N PCI Adapter Works great. Getting excellent 300Mbps signal. Moved desktop PC to room without wired internet.|
|Bug||2:00pm on Thursday, April 8th, 2010|
|Fixed by booting into safe mode and installing the driver from there, using the included disk. Once complete, restarted machine.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Draft N Wireless PCI Adapter
TL-WN851N Draft N Wireless PCI Adapter
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright 2007 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
The following contents should be found in your box: One TL-WN851N Draft N Wireless PCI Adapter Quick Installation Guide One Resource CD for TL-WN851N, including: TP-LINK Draft N Wireless Client Utility (11NWCU) and Drivers User Guide Other Helpful Information
Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TL-WN851N Draft N Wireless PCI Adapter for assistance.
The Adapter mentioned in this user guide stands for TL-WN851N Draft N Wireless PCI Adapter without any explanations.
1.1 1.2 1.3 2.1 2.2 2.2.1 2.2.2
Overview of the product.... 1 Features..... 1 LED Status.... 2
Installation Guide... 3
Hardware Installation.... 3 Software Installation.... 3 Overview.... 3 Software Installation for Windows XP... 3
3.1 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.6 3.2.7 3.3 3.3.1 3.3.2
Current Status.... 11 Profile Management... 13 Add or Modify a Configuration Profile... 13 Remove a profile.... 18 Switch another Profile.... 18 Export a Profile.... 19 Import a Profile.... 19 Scan Available Networks.... 20 Auto Profile Selection Management... 20 Diagnostics.... 21 Check Driver Information.... 22 Check Receive and Transmit Statistical Information... 22
Appendix A: Specifications... 24 Appendix B: Glossary.... 25
Chapter 1. Introduction
1.1 Overview of the product
Thank you for choosing the TL-WN851N Draft N Wireless PCI Adapter. The adapter is a draft 802.11n client device; it is designed to provide a high-speed and unrivaled wireless performance for your notebook. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. With the 802.11n technology, higher throughput improvements using MIMO (multiple input, multiple output antennas), the TL-WN851Ns auto-sensing capability allows high packet transfer rate of up to 300Mbps for maximum throughput. It has good capability on anti-jamming, it can also interoperate with other wireless (802.11b) products. The adapter supports WEP, WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed. The adapter is easy to install and manage. The Quick Setup Wizard guides you step-by-step through the installation process; the TP-LINK Draft N Wireless Client Utility helps you create a wireless connection immediately. With unmatched wireless performance, reception, and security protection, the TL-WN851N is the best choice for easily adding or upgrading wireless connectivity to your notebook computer.
Complies with IEEE802.11n (draft), IEEE802.11g, IEEE802.11b standards Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, 64/128/152-bit WEP encryption Supports high rate of up to 300Mbps for maximum throughput, supports automatically adjust to lower speeds due to distance or other operating limitations Provides 32-bit PCI interface Supports Ad-Hoc and Infrastructure modes Good capability on anti-jamming Supports roaming between access points when configured in Infrastructure mode Ease to configure and provides monitoring information Supports Windows 2000, XP Built-in two internal antennas which are listed in a format of 2x2 for two receivers and two transmitters.
Status Flashing Alternately Intermittently Flashing connection. The adapter is already connected but is not transmitting or receiving data. The adapter is transmitting or receiving data. Working Status The adapter is trying to scan a networking
LED Indications Status Green Activity Green Status Green Activity Green Status Green Activity Green
Chapter 2. Installation Guide
Turn off your desktop PC and disconnect the power. Open your PC case and locate an available PCI slot on the motherboard. Remove the metal slot cover on the back of the PC. Check with your computer manufacturer for instructions if needed. Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's contacts. Once the adapter is firmly in place, secure its fastening tab to your PC's chassis with a mounting screw. Then, close your PC case. Reconnect your PCs power and turn on your desktop PC.
To install the adapter, follow these steps listed below:
The Adapters Setup Wizard will guide you through the Installation procedure for Windows 2000, XP. The Setup Wizard will install the TP-LINK Draft N Wireless Client Utility (11NWCU) and drivers. When you install the hardware prior to before installing the software, the system will prompt Found New Hardware Wizard, click Cancel, and run the Setup Wizard program on the CD-ROM. The Setup steps for Windows 2000 and XP are very similar. The following setup steps are for Windows XP.
2.2.2 Software Installation for Windows XP
1. Insert the Resource CD into your CD-ROM drive, Click the Start button and choose Run. In the field that appears, enter F:\XXX\setup.exe (presume "F" is the letter of your CD-ROM drive, XXX represents the setup program path, which is labeled on the Resource CD), then Figure 2-1 will appear. You can click Cancel to end the installation in the screen above.
Figure 2-1 2. Soon, Figure 2-2 will display after a moment. Click Next to continue.
Figure 2-2 3. After that, you should choose a Setup type. It is recommended that you select Install Client Utilities and Driver. Select Install Driver Only to install driver only, select Make Driver Installation Diskette(s) to make the diskette(s) as the installation driver (shown in Figure 2-3). Click Next to continue.
Figure 2-3 4. Click Browse to change the destination location for the software, then click Next in the screen below (shown in Figure 2-4).
Figure 2-4 5. After that, select the program folder, you should create a new folder name or select one from the Existing Folders list. It is recommended that you keep the default setting. Click Next to continue the installation.
Figure 2-5 6. Read the information about the installation, click Next to continue.
Figure 2-6 7. Choose configuration tool, if you are not sure, please leave it default. Then click Next to continue.
Figure 2-7 8. If you select Install Single Sign On feature set on the screen below (shown in Figure 2-8), the system will reboot later after you complete the installation; if you select the next option, the system wont reboot after the installation. Click Next to continue the Installation.
Figure 2-8 9. Click OK to continue the Installation on the screen below.
Figure 2-9 10. Wait a while for the setup as shown in Figure 2-10.
Figure 2-10 Note: 1) For Windows XP, the Setup Wizard will notify you of how to proceed with the installation during these steps (shown in Figure 2-11). Our drivers have been tested thoroughly, and are able to work with the operating system. Click Continue Anyway to continue the Installation.
Figure 2-11 In Windows 2000, the warning screen is shown below (Figure 2-12), and please select Yes to continue installation.
Figure 2-12 11. After all the steps above, you will see the screen below, click Finish to complete the installation.
Chapter 3. Configuration
TP-LINK TL-WN851N can be configured by TP-LINK Draft N Wireless Client Utility (11NWCU). This chapter describes how to configure your Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features. After Installing the Adapter, the Adapters tray icon will appear in your system tray. It
appears at the bottom of the screen, and shows the signal strength using color and the received signal strength indication (RSSI).
If the icon is gray, there is no connection.
If the icon is red, there is poor signal strength and the RSSI is less than 5dB. If the icon is yellow, there is poor signal strength and the RSSI is between 5dB and 10dB. If the icon is green, there is good signal strength and the RSSI is between 10dB and 20dB. If the icon is green, there is excellent signal strength and the RSSI is more than 20dB. Double-click the icon and the 11NWCU will run. You can also run the utility by clicking the Start Program TP-LINK TP-LINK Draft N Wireless Client Utility TP-LINK Draft N Wireless Client Utility. The 11NWCU provides some integrated and easy tools to: Display current status information Edit and add configuration profiles Display current diagnostics information The section below introduces these above capabilities.
The Current Status tab contains general information about the program and its operations. The Current Status tab neednt any configurations.
Figure 3-1 The following table describes the items found on the Current Status screen. Profile Name - This shows the name of current selected configuration profile. The configuration of Profile name will be described on the General tab of Profile Management. Link Status - This shows whether the station is associated to the wireless network. Wireless Mode - Here displays the wireless mode. Network Type - The type of network and the station currently connected are shown here. The options include: Infrastructure (access point) Ad Hoc
Note: You can configure the network type and wireless mode on the Advanced tab of Profile Management. IP Address - This displays the computers IP address. Control Channel - This shows the currently connected channel. Data Encryption - Here displays the encryption type the driver is using. You can configure it on the Security tab of Profile Management. Server Based Authentication - This shows whether the server based authentication is used. Signal Strength - This shows the strength of the signal. Click Advanced on the screen above, you can see advanced information about the program and its operations.
Click the Profile Management tab of the 11NWCU and the next screen will appear (shown in Figure 3-2). The Profile Management screen provides tools to: Add a new profile Modify a profile Remove a profile Activate a Profile Import a Profile Export a Profile Scan Available Networks Order profiles
Add or Modify a Configuration Profile
To add a new configuration profile, click New on the Profile Management tab. To modify a configuration profile, select the configuration profile from the Profile list and click Modify. Then you will see the Management dialog box (shown in Figure 3-3). 1. Edit the General tab Profile Name - Please enter the Profile name which identifies the configuration profile. This name must be unique. Note that the profile names are not case-sensitive. Client Name - Please enter the Profile name which identifies the client machine. Network Names (SSIDs) - Please enter the IEEE 802.11 wireless network name. This field has a maximum limit of 32 characters.
Figure 3-3 2. Edit the Security tab
Select the Security tab in the screen above, then you can edit the fields to configure the profile. To define the security mode, select the radio button of the desired security mode as follows.
Figure 3-4 WPA/WPA2: Wi-Fi Protected Access WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase 802.1x: Enables 802.1x security. Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both the access point and the station. To define shared encryption keys, choose the Shared Key radio button and click Configure to fill in the Define Shared Keys window (shown in Figure 3-5). Note: The WEP security mode is not available for 802.11n. None: No security (not recommended). Note: If the access point which the Adapter is associated has WEP set and the client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the Security tab to allow association. To complete WEP encryption configuration, you must select the 802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog. To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
Figure 3-5 Note: Select different Security Options, the configurations are different; you can select the appropriate security option and configure the exact key as your need. 3. Edit the Advanced tab
This screen below allows you to make advanced configuration for the profile.
Figure 3-6 Power Save Mode - Please select the power save mode in the drop-down list. Maximum - Selects maximum mode to let the access point buffer incoming messages for the Adapter. The Adapter will detect the access point if any messages are waiting periodically. Normal - Normal mode uses maximum when retrieving a large number of packets, then switches back to power save mode after retrieving the packets. Off - Turns power saving off, thus powering up the Wireless PCI Adapter continuously for a short message response time. Infrastructure - All wireless clients will connect to an access point or wireless router. Ad-Hoc - Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more TL-WN851N wireless adapters.
Network Type: There are basically two modes of networking:
Note: 1) 2) An Infrastructure network contains an Access Point or wireless router. All the wireless devices or clients will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless desktop adapters. All the adapters must be in Ad-Hoc mode to communicate. Wireless Mode: Specifies 2.4 GHz 300 Mbps, 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps operation in an access point network. The Wireless adapter must match the wireless mode of the access point with which it associates.
Wireless Mode when Starting an Ad Hoc Network: Specifies 2.4 GHz 300/54/11 Mbps to start an Ad Hoc network if no matching network name is found after scanning all available modes. This mode also allows the selection of the channel that the Wireless Adapter uses. The channels available depend on the regulatory domain. If the adapter finds no other ad hoc adapters, the channel that the adapter starts the ad hoc network with will be selected automatically. The Adapter must match the wireless mode and channel of the clients it associates. 802.11 Authentication Mode: Select which mode the Adapter uses to authenticate to an access point: Automatic causes the adapter to attempt authentication using shared, but switches it to open authentication if shared fails. Open System enables an adapter to attempt authentication regardless of its WEP settings. It will only associate with the access point if the WEP keys on both the adapter and the access point match. Shared-key only allows the adapter to associate with access points that have the same WEP key.
For infrastructure (access point) networks, click Preferred APs to specify four access points at most to the client adapter that attempts to be associated to the access points. The four access points have different priorities; the frontal has the higher priority.
1. 2. 3.
Remove a profile
Go to the Profile Management tab (shown in Figure 3-2). Select the profile name in the Profiles List. Click Remove. Note:
The profile being used cant be removed.
Switch another Profile
Go to the Profile Management screen (shown in Figure 3-2).
TL-WN851N 2. 3. Select the profile name required in the Profiles List. Click Activate.
1. 2. 3. 4.
Export a Profile
From the Profile Management screen (shown in Figure 3-2), highlight the profile to export. Click Export, the Export Profile window will then appear below. Browse the directory to export the profile to. Click Save. The profile should then be exported to the specified location.
Import a Profile
From the Profile Management screen (shown in Figure 3-2), click Import. Then the Import Profile will appear below. Browse to the directory where the profile is located. Highlight the profile name. Click Open, the imported profile will then appear in the Profiles List.
Scan Available Networks
Click Scan on the Profile Management screen (shown in Figure 3-2), the Available Infrastructure and Ad Hoc Networks window will appear below. Click Refresh to refresh the list at any time. Highlight a network name and click Activate to connect to an available network. If no configuration profile exists for that network, the Profile Management window will open the General tab screen. Fill in the Profile name and click OK to create the configuration profile for that network.
Auto Profile Selection Management
The auto selection feature allows the adapter to automatically select a profile from the list of profiles and use it to connect to the network. To add a new profile into the Auto Selected Profiles list, please follow these steps. 1. 2. On the Profile Management screen (shown in Figure 3-2), click Order Profiles. The Auto Profiles Selection management window will appear (shown in Figure 3-11) with a list of all created profiles in the Available Profiles.
Figure 3-11 3. 4. 5. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in the Auto Selected Profiles box. Highlight a profile in the Auto Selected Profiles box. Click Move Up or Move Down as appropriate. Note: The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the lowest priority. 6. 7. Click OK. Check the Auto Select Profiles checkbox on the Profile Management tab (shown in Figure 3-2). Note: When auto profile selection is enabled by checking Auto Select Profiles on the Profile Management tab, the client adapter will scan for an available network. The profile with the highest priority and the same SSID as one of the found networks will be used to connect to the network. If the connection fails, the client adapter will try the next highest priority profile that matches the SSID until an available network is found.
The Diagnostics tab of the TP-LINK Draft N Wireless Client Utility (11NWCU) provides buttons used to retrieve receiving and transmitting statistics. The Diagnostics tab does not require any configuration. The Diagnostics tab lists the following receiving and transmitting diagnostics for frames received or transmitted by the wireless network adapter: Multicast frames transmitted and received Broadcast frames transmitted and received
TL-WN851N Unicast frames transmitted and received Total bytes transmitted and received
Check Driver Information
Click the Adapter Information button in the screen above, you will see the adapter information, including general information about the wireless network adapter and the Network Driver Interface Specification (NDIS) driver. Access the adapter information from the Diagnostics tab. Card Name - The name of the wireless network adapter. MAC Address - The MAC address of the wireless network adapter. Driver - The driver name and path of the wireless network adapter driver. Driver Version - The version of the wireless network adapter driver. Driver Date - The creation date of the wireless network adapter driver. Client Name - The name of the client computer.
Check Receive and Transmit Statistical Information
The Advanced Statistics show receiving and transmitting statistical information about the following receiving and transmitting diagnostics for frames received by or transmitted to the wireless network adapter.
Appendix A: Specifications
Normal Interface Standards Operating System Throughput 32 bit PCI Interface IEEE802.11n (draft); IEEE802.11g; IEEE802.11b; Windows 2000, XP 300Mbps (Maximal) 27/54/81/108/162/216/243/270Mbps 13.5/27/40.5/54/81/108/121.5/135Mbps Radio Data Rate 13/26/39/52/78/104/117/130Mbps 6.5/13/19.5/26/39/52/58.5/65Mbps 1/2/5.5/11Mbps (Auto Rate Sensing) 11b:CCK,QPSK,BPSK; Modulation Media Access Protocol Transmit Power Data Security Frequency Spread Spectrum Safety & Emissions 11g:OFDM; 11n: QPSK,BPSK,16-QAM,64-QAM CSMA/CA with ACK 19dBm (Maximal) WPA/WPA2; 64/128/152-bit WEP; TKIP/AES 2.4 ~ 2.4835GHz Direct Sequence Spread Spectrum (DSSS) FCC, CE
Environmental and Physical Operating Temp. Storage Temp. Humidity 0~40 (32~104) -(-40~158) 10% - 95% RH, Non-condensing
Appendix B: Glossary
802.11b - The 802.11b standard specifies a wireless product networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. 802.11g - specification for wireless networking at 54 Mbps using direct-sequence spread-spectrum (DSSS) technology, using OFDM modulation and operating in the unlicensed radio spectrum at 2.4GHz, and backward compatibility with IEEE 802.11b devices, and WEP encryption for security. 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding. The Enhanced Wireless Consortium (EWC) was formed to help accelerate the IEEE 802.11n development process and promote a technology specification for interoperability of next-generation wireless local area networking (WLAN) products. Ad-hoc Network - An ad-hoc network is a group of computers, each with a Wireless Adapter, connected as an independent 802.11 wireless LAN. Ad-hoc wireless computers operate on a peer-to-peer basis, communicating directly with each other without the use of an access point. Ad-hoc mode is also referred to as an Independent Basic Service Set (IBSS) or as peer-to-peer mode, and is useful at a departmental scale or SOHO operation. DSSS - (Direct-Sequence Spread Spectrum) - DSSS generates a redundant bit pattern for all data transmitted. This bit pattern is called a chip (or chipping code). Even if one or more bits in the chip are damaged during transmission, statistical techniques embedded in the receiver can recover the original data without the need of retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. However, to an intended receiver (i.e. another wireless LAN endpoint), the DSSS signal is recognized as the only valid signal, and interference is inherently rejected (ignored). FHSS - (Frequency Hopping Spread Spectrum) - FHSS continuously changes (hops) the carrier frequency of a conventional carrier several times per second according to a pseudo-random set of channels. Because a fixed frequency is not used, and only the transmitter and receiver know the hop patterns, interception of FHSS is extremely difficult. Infrastructure Network - An infrastructure network is a group of computers or other devices, each with a Wireless Adapter, connected as an 802.11 wireless LAN. In infrastructure mode, the wireless devices communicate with each other and to a wired network by first going through an access point. An infrastructure wireless network connected to a wired network is referred to as a Basic Service Set (BSS). A set of two or more BSS in a single network is referred to as an Extended Service Set (ESS). Infrastructure mode is useful at a corporation scale, or when it is necessary to connect the wired and wireless networks. Spread Spectrum - Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communications systems.
It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS). SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name. See also Wireless Network Name and ESSID. WEP - (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit or 128-bit or 152-bit shared key algorithm, as described in the IEEE 802.11 standard. To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. Wi-Fi - A trade name for the 802.11b wireless networking standard, given by the Wireless Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standards group promoting interoperability among 802.11b devices. WLAN - (Wireless Local Area Network) - A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area. WPA - (Wi-Fi Protected Access) - A wireless security protocol use TKIP (Temporal Key Integrity Protocol) encryption, which can be used in conjunction with a RADIUS server.
Siewert & Kau Computertechnik GmbH Walter-Gropius-Str. 12a DE 50126 Bergheim Telephone: 02271 - Fax: 02271 - E-Mail: firstname.lastname@example.org Internet: http://www.siewert-kau.com
Network adapter, PCI, 802.11b, 802.11g, 802.11n (draft 2.0)
The TL-WN851N Wireless N PCI Adapter complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, and IEEE 802.11b standards. Wireless transmission rates can reach up to 300Mbps. The PCI card employs MIMO technology and has two external detachable omni directional antennas providing even better wireless performance, transmission rates, stability and coverage. At the same time, CCA technology automatically avoids channel conflicts using its channel selection feature. This product supports 64/128/152-bit WEP encryptions, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions and mechanisms in addition to the adapter's QSS (Quick Secure Setup) feature, allowing users to quickly and easily configure wireless security. This product can also simultaneously operate bandwidth intensive applications such as voice and video. Applications using a lot of bandwidth that are sensitive to interruptions such as voice and video applications are given priority in order to assure quality. It also works well with other 11g and 11n protocol wireless products. General information
TP-Link Category Article number Network Adapters 310091 TL-WN851N
Product Description Device Type Form Factor Interface (Bus) Type Dimensions (WxDxH) Data Link Protocol Data Transfer Rate Frequency Band Compliant Standards System Requirements TP-Link TL-WN851N - network adapter Network adapter Plug-in card PCI 2.2 cm x 13.3 cm x 12.1 cm IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) 300 Mbps 2.4 GHz IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft 2.0) Microsoft Windows Vista / 2000 / XP
More detailed technical specifications
General Device Type Form Factor Interface (Bus) Type Width Depth Height Networking Connectivity Technology Data Link Protocol Spread Spectrum Method Data Transfer Rate Line Coding Format Frequency Band Features Compliant Standards Aerial Antenna Antenna Qty Directivity Gain Level Expansion / Connectivity Compatible Slots Miscellaneous Encryption Algorithm Compliant Standards AES, 128-bit WEP, 64-bit WEP, 152-bit WEP, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK CE, FCC, RoHS 1 x PCI External detachable 2 Omni-directional 2 dBi Wireless IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) OFDM 300 Mbps CCK, 64 QAM, 16 QAM 2.4 GHz MIMO technology IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft 2.0) Network adapter Plug-in card PCI 2.2 cm 13.3 cm 12.1 cm
Software / System Requirements Software Included OS Required Environmental Parameters Min Operating Temperature Max Operating Temperature Humidity Range Operating 0 C 40 C 10 - 90% Drivers & Utilities Microsoft Windows Vista / 2000 / XP
Siewert & Kau take no accountability nor guarantee that all information contained on these pages is current and complete.
The TL-WN851N Wireless N PCI Adapter complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, and IEEE 802.11b standards. Wireless transmission rates can reach up to 300Mbps. The PCI card employs MIMO technology and has two external detachable omni directional antennas providing even better wireless performance, transmission rates, stability and coverage. At the same time, CCA technology automatically avoids channel conflicts using its channel selection feature. This product supports 64/128/152-bit WEP encryptions, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions and mechanisms in addition to the adapter's QSS (Quick Secure Setup) feature, allowing users to quickly and easily configure wireless security. This product can also simultaneously operate bandwidth intensive applications such as voice and video. Applications using a lot of bandwidth that are sensitive to interruptions such as voice and video applications are given priority in order to assure quality. It also works well with other 11g and 11n protocol wireless products.
|Device Type||Network adapter|
|Form Factor||Plug-in card|
|Interface (Bus) Type||PCI|
|Data Link Protocol||IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)|
|Spread Spectrum Method||OFDM|
|Data Transfer Rate||300 Mbps|
|Line Coding Format||CCK, 64 QAM, 16 QAM|
|Frequency Band||2.4 GHz|
|Compliant Standards||IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft 2.0)|
|Gain Level||2 dBi|
|Expansion / Connectivity|
|Compatible Slots||1 x PCI|
|Encryption Algorithm||AES, 128-bit WEP, 64-bit WEP, 152-bit WEP, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK|
|Compliant Standards||CE, FCC, RoHS|
|Software / System Requirements|
|Software Included||Drivers & Utilities|
|OS Required||Microsoft Windows Vista / 2000 / XP|
|Min Operating Temperature||32 °F|
|Max Operating Temperature||104 °F|
|Humidity Range Operating||10 - 90%|
|Universal Product Identifiers|
|GTIN||00845973050337, 03548383029203, 06935364050337|
MHC-LX10000 2-hardcore West RA Z250A Stylus 1000 2494HM Imagemixer Laserjet 3700 EWD-1245 Caplio R5 A3500 UA55C7000WM S75340KG98 CTK-571 Prime Driver MO655 DSC-T100 CP1370EST 42PB120S4 W2242TQ-BF VC-5916 RE-LA1 Alert-825 EWF12680W LE46A558 Yamaha VX TCP54S2 Lwhd1807HR PM6010 OSE MX AIR DDX5026 Lbtv102 NN-5050 HX1000W Kompressor Windows 7 FI22 10FA Dogs Life MP150 PDP-32H1A 1 FUN SRU5130 87 Labelpoint 350 RT-29FD15R WG511T Rcs-515h Linux LA26A450c1 Ur2110H GM-X372 DC500 TT8020 EP2050 IN 1 SS-F6000 WS7014 AP-D3 C Bassman 400 ZTB220 Extreme PSS-580 NMP2S PF-800 FX-83WA Luep02-90-S RMR182 Tycc10W AX-R551BK LB500 FX500 ZR800 CN-GP50N CT 5750 LN26B350f1 5 5 Handheld DEQ830 Basic Grandprix 1997 Timex W-62 DCR-TRV890E 713BM Plus C5850 GR-T452XV Station Lenovo B460 Biberons RA-95 Motorola I455 Chipset KDL-52W3000 Xv-n412 SL-PG490 37LF65 VPL-CX63 VDA-6 Voice DUO F8E838 32LG5000-ZA AEK WV-CP474 4857 S AT-150 VSX-LX60
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101