Reviews & Opinions
Independent and trusted. Read before buy TP-link TL-WR741ND!

TP-link TL-WR741ND

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
TP-link TL-WR741nd - Installation Guide, size: 2.0 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

TP-link TL-WR741NDTP-LINK Technologies TP-Link TL-WR741ND Wireless Lite N Router Wireless router - EN, Fast EN, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)

External, Firewall protection, dynamic IP address assignment , NAT support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), DoS attack…

The TL-WR741ND is a combined wired/wireless network connection device integrated with internet-sharing router and 4-port switch. The wireless Lite-N Router is 802.11b/g compatible based on 802.11n technology and gives you 802.11n performance up to 150Mbps at an even more affordable price. Bordering on 11n and surpassing 11g speed enables high bandwidth consuming applications like video streaming to be more fluid. You can enjoy a high quality experience when video streaming, VoIP, or online gamin... Read more

 

[ Report abuse or wrong photo | Share your TP-link TL-WR741ND photo ]

Video review

D link 500B + TP Link TL WR741ND Working Parte II

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
HighNitrous 3:43am on Saturday, May 29th, 2010 
TP-LINK perfect for cable Having used a ZY-Xl previously on my cable network and having continuous cut offs I changed over to a TP-LINK and have had n...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Table 1-1 Note:

After a device is successfully added to the network by QSS function, the QSS LED will keep on for about 5 minutes and then turn off. -4-

1.4.2 The Rear Panel

Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View right to left). Wireless antenna: To receive and transmit the wireless data. POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR740N/TL-WR741ND 150Mbps Wireless N Router. ON/OFF: The switch for the power. 4,3,2,1 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. RESET There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on System Tools Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings.
Chapter 2. Connecting the Router

2.1 System Requirements

Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.) PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari
2.2 Installation Environment Requirements
Place the Router in a well ventilated place far from any heater or heating vent Avoid direct irradiation of any strong light (such as sunlight) Keep at least 2 inches (5 cm) of clear space around the Router Operating Temperature: 0~40 (32~104) Operating Humidity: 10%~90%RH, Non-condensing
2.3 Connecting the Router
Before installing the Router, make sure your PC is connected to the Internet through the broadband service successfully. If there is any problem, please contact your ISP. After that, please install the Router according to the following steps. Don't forget to pull out the power plug and keep your hands dry. 1. 2. Power off your PC, Cable/DSL Modem, and the Router. Locate an optimum location for the Router. The best place is usually at the center of your wireless network. The place must accord with the Installation Environment Requirements. 3. 4. Adjust the direction of the antenna. Normally, upright is a good direction. Connect the PC(s) and each Switch/Hub in your LAN to the LAN Ports on the Router, shown in Figure 2-1. (If you have the wireless NIC and want to use the wireless function, you can skip this step.) 5. 6. Connect the DSL/Cable Modem to the WAN port on the Router, shown in Figure 2-1. Connect the power adapter to the power socket on the Router, and the other end into an

TL-WR740N/TL-WR741ND electrical outlet. The Router will start to work automatically. 7. Power on your PC and Cable/DSL Modem.
Figure 2-1 Hardware Installation of the TL-WR741ND 150Mbps Wireless N Router
Chapter 3. Quick Installation Guide
This chapter will show you how to configure the basic functions of your TL-WR741ND 150Mbps Wireless N Router using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default IP address of the TL-WR741ND 150Mbps Wireless N Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all the default values for description. Connect the local PC to the LAN ports of the Router. And then you can configure the IP address for your PC in the following two ways. Configure the IP address manually 1) Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this, please refer to Appendix B: "Configuring the PC". 2) Configure the network parameters. The IP address is 192.168.1.x ("x" is any number from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.1.1 (The Router's default IP address) Obtain an IP address automatically 1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If you need instructions as to how to do this, please refer to Appendix B: "Configuring the PC. 2) Then the built-in DHCP server will assign IP address for the PC.
Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the Router. The following example is in Windows 2000 OS. Open a command prompt, and type ping 192.168.1.1, and then press Enter. If the result displayed is similar to the Figure 3-1, it means the connection between your PC and the Router has been established well.
Figure 3-1 Success result of Ping command
If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router is failed.
Figure 3-2 Failure result of Ping command
Please check the connection following these steps: 1. Is the connection between your PC and the Router correct? Note: The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter should be lit. -9-
TL-WR740N/TL-WR741ND 2. Is the TCP/IP configuration for your PC correct? Note:
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the TL-WR741ND 150Mbps Wireless N Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. 1. To access the configuration utility, open a web-browser and type in the default address http://192.168.1.1 in the address field of the browser.

- 19 -

The QSS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration.
The QSS Configuration Screen of Wireless Adapter Method Three: Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-3, then the following screen will appear.

- 20 -

Figure 4-4 Step 2: Step 3:

Add A New Device

Choose Press the button of the new device in two minutes and click Connect. For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration utility of the QSS as below, and click Next.
The QSS Configuration Screen of Wireless Adapter Step 4: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration.

- 21 -

The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my Router Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-3, then the following screen will appear.
Step 2: Choose Enter the new device's PIN and enter the PIN code of the wireless adapter in the field after PIN as shown in the figure above. Then click Connect. Note: The PIN code of the adapter is always displayed on the QSS configuration screen Step 3: For the configuration of the wireless adapter, please choose Enter a PIN into my access point or a registrar in the configuration utility of the QSS as below, and click Next. - 22 -
The QSS Configuration Screen of Wireless Adapter Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my Router Step 1: Get the Current PIN code of the Router in Figure 4-3 (each Router has its unique PIN code. Here takes the PIN code 12345670 of this Router for example). Step 2: For the configuration of the wireless adapter, please choose Enter a PIN from my access point in the configuration utility of the QSS as below, and enter the PIN code of the Router into the field after Access Point PIN. Then click Next.

- 30 -

Figure 4-11
User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Auth Server - Enter the authenticating server IP address or host name. Auth Domain - Type in the domain suffix server name based on your location. e.g. NSW / ACT - nsw.bigpond.net.au VIC / TAS / WA / SA / NT - vic.bigpond.net.au QLD - qld.bigpond.net.au MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet connection keeps active all the time, please enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

- 31 -

Connect Automatically - The connection can be re-established automatically when it was down. Connect Manually - You can click the Connect/Disconnect button to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on Demand mode. The Internet connection can be disconnected automatically after a specified inactivity period and re-established when you attempt to access the Internet again. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background. Click the Save button to save your settings. 5. If your ISP provides L2TP connection, please select L2TP/Russia L2TP option. And you should enter the following parameters (Figure 4-12):

Figure 4-12

- 32 -
User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. Connect on Demand - You can configure the Router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, check the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radio button. Connect Manually - You can configure the Router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the Router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, check the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number of minutes that you wish to have the Internet connecting last unless a new link is requested. Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, because some applications are visiting the Internet continually in the background. Click the Save button to save your settings. 6. If your ISP provides PPTP connection, please select PPTP/Russia PPTP option. And you should enter the following parameters (Figure 4-13):

Figure 4-32 Add or Modify a Virtual Server Entry
Note: If your computer or server has more than one type of available service, please select another service, and enter the same IP Address for that computer or server. To modify or delete an existing entry: 1. 2. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. - 51 -
TL-WR740N/TL-WR741ND 3. Click the Save button.
Click the Enable/Disabled All button to make all entries enabled/disabled. Click the Delete All button to delete all entries. Click the Next button to go to the next page and click the Previous button to return the previous page. Note: If you set the service port of the virtual server as 80, you must set the Web management port on Security Remote Management page to be any other value except 80 such as 8080. Otherwise there will be a conflict to disable the virtual server.

4.8.2 Port Triggering

Choose menu Forwarding Port Triggering, you can view and add port triggering in the screen as shown in Figure 4-33. Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so on. These applications cannot work with a pure NAT Router. Port Triggering is used for some of these applications that can work with an NAT Router.
Figure 4-33 Port Triggering
Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field. 2. The Router records this connection, opens the incoming port or ports associated with this entry in the Port Triggering table, and associates them with the local host. 3. When necessary the external host will be able to connect to the local host using one of the ports defined in the Incoming Ports field. Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger this rule. Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all protocols supported by the Router). - 52 -
Incoming Ports Range - The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC that triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030. Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or ALL (all protocols supported by the Router). Status - The status of this entry, either Enabled or Disabled. To add a new rule, follow the steps below. 1. 2. Click the Add New button, the next screen will pop-up as shown in Figure 4-34. Select a common application from the Common Applications drop-down list, then the Trigger Port field and the Incoming Ports field will be automatically filled. If the Common Applications do not have the application you need, enter the Trigger Port and the Incoming Ports manually. 3. 4. 5. 6. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either TCP, UDP, or All. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All. Select Enable in Status field. Click the Save button to save the new rule.

4.9 Security

Figure 4-37 The Security menu
There are four submenus under the Security menu as shown in Figure 4-37: Basic Security, Advanced Security, Local Management and Remote Management. Click any of them, and you will be able to configure the corresponding function.

- 55 -

4.9.1 Basic Security
Choose menu Security Basic Security, you can configure the basic security in the screen as shown in Figure 4-38.
Figure 4-38 Basic Security
Firewall - A firewall protects your network from the outside world. Here you can enable or disable the Routers firewall. SPI Firewall - SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the computers on the LAN exposed to the outside world, you can disable it. VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Routers firewall. PPTP Passthrough - Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. To allow PPTP tunnels to pass through the Router, keep the default, Enabled. L2TP Passthrough - Layer 2 Tunneling Protocol (L2TP) is the method used to enable Point-to-Point sessions via the Internet on the Layer 2 level. To allow L2TP tunnels to

- 56 -

TL-WR740N/TL-WR741ND pass through the Router, keep the default, Enabled.
IPSec Passthrough - Internet Protocol Security (IPSec) is a suite of protocols for ensuring private, secure communications over Internet Protocol (IP) networks, through the use of cryptographic security services. To allow IPSec tunnels to pass through the Router, keep the default, Enabled. ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT) traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data" protocols such as FTP, TFTP, H323 etc. FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep the default Enable. TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep the default Enable. H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, keep the default Enable. Click the Save button to save your settings.

4.9.2 Advanced Security

Choose menu Security Advanced Security, you can protect the Router from being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the screen as shown in Figure 4-39.

Figure 4-39

Advanced Security - 57 -
Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood. DoS protection - Denial of Service protection. Check the Enable or Disable button to enable or disable the DoS protection function. Only when it is enabled, will the flood filters be enabled. Note: Dos Protection will take effect only when the Traffic Statistics in System Tool Traffic Statistics is enabled. Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering. ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately. Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering. UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately. Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value, the Router will startup the blocking function immediately. Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN Port. The default setting is disabled. If enabled, the ping packet from the Internet cannot access the Router. Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From LAN Port. The default setting is disabled. If enabled, the ping packet from LAN cannot access the Router. This function can be used to defend against some viruses. Click the Save button to save the settings. Click the Blocked DoS Host List button to display the DoS host table by blocking.

- 64 -

5. Select a schedule from the Schedule drop-down list or choose Click Here To Add New Schedule. 6. In the Action field, select Deny or Allow. 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button.
Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click the Delete All button to delete all the entries in the table. You can change the entrys order as desired. Fore entries are before hind entries. Enter the ID number in the first box you want to move and another ID number in second box you want to move to, and then click the Move button to change the entrys order. Click the Next button to go to the next page, or click the Previous button to return to the previous page.
Figure 4-47 Add or Modify Internet Access Control Entry
For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the LAN to access the Internet, you should follow the settings below: 1. Click Access Control Host in the left to enter the Host Settings page. Add a new entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA. 2. Click Access Control Target in the left to enter the Target Settings page. Add a new entry with the Target Description is Target_1 and Domain Name is www.google.com.

- 65 -

3. Click Access Control Schedule in the left to enter the Schedule Settings page. Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start Time is 1800 and Stop Time is 2000. 4. Click Access Control Rule in the left to return to the Access Control Rule Management page. Select Enable Internet Access Control and choose "Deny the packets not specified by any access control policy to pass through the Router". 5. Click Add New. button to add a new rule as follows: In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. In Host field, select Host_1. In Target field, select Target_1. In Schedule field, select Schedule_1. In Action field, select Allow. In Status field, select Enable. Click Save to complete the settings. Then you will go back to the Access Control Rule Management page and see the following list.

4.11.2 Host

Choose menu Access Control Host, you can view and set a Host list in the screen as shown in Figure 4-48. The host list is necessary for the Access Control Rule.
Figure 4-48 Host Settings

- 68 -

1) In Target Description field, create a unique description for the target (e.g. Target_1). 2) In Domain Name field, enter the domain name in the blank. You can enter 4 domain names. 3. Click the Save button.
Figure 4-52 Add or Modify an Access Target Entry
Figure 4-53 Add or Modify an Access Target Entry
For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.google.com only, you should first follow the settings below: - 69 -
1. Click Add New button in Figure 4-51 to enter the Add or Modify an Access Target Entry page. 2. In Mode field, select Domain Name from the drop-down list. 3. In Target Description field, create a unique description for the target (e.g. Target_1). 4. In Domain Name field, enter www.google.com. 5. Click Save to complete the settings. Then you will go back to the Target Settings page and see the following list,

4.11.4 Schedule

Choose menu Access Control Schedule, you can view and set a Schedule list in the next screen as shown in Figure 4-54. The Schedule list is necessary for the Access Control Rule.
Figure 4-54 Schedule Settings
Schedule Description - Here displays the description of the schedule and this description is unique. Day - Here displays the day(s) in a week. Time - Here displays the time period in a day. Modify - Here you can edit or delete an existing schedule. To add a new schedule, follow the steps below. 1. Click Add New. button shown in Figure 4-54 and the next screen will pop-up as shown in Figure 4-55. 2. In Schedule Description field, create a unique description for the schedule (e.g. Schedule_1). 3. In Day field, select the day or days you need. 4. In Time field, you can select all day-24 hours or you may enter the Start Time and Stop Time in the corresponding field. - 70 -
TL-WR740N/TL-WR741ND 5. Click Save to complete the settings. Click the Delete All button to delete all the entries in the table.
Click the Next button to go to the next page, or click the Previous button return to the previous page.
Figure 4-55 Advanced Schedule Settings
For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, you should first follow the settings below: 1. Click Add New. button shown in Figure 4-54 to enter the Advanced Schedule Settings page. 2. In Schedule Description field, create a unique description for the schedule (e.g. Schedule_1). 3. In Day field, check the Select Days radio button and then select Sat and Sun. 4. In Time field, enter 1800 in Start Time field and 2000 in Stop Time field. 5. Click Save to complete the settings. Then you will go back to the Schedule Settings page and see the following list.

- 71 -

4.12 Advance Routing
Figure 4-56 Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-56): Static Routing List and System Routing Table. Click any of them, and you will be able to configure the corresponding function.

4.12.1 Static Routing

Choose menu Advanced Routing Static Routing, and you can configure the static route in the next screen, shown in Figure 4-57. A static route is a pre-determined path that network information must travel to reach a specific host or network.
Figure 4-57 Static Routing
To add static routing entries, follow the steps below. 1. Click Add New shown in Figure 4-57, you will see the following screen Figure 4-58
Figure 4-58 Add or Modify a Static Route Entry

- 72 -

TL-WR740N/TL-WR741ND 2. Enter the following data.
Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route. Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion. Gateway - This is the IP Address of the gateway device that allows for contact between the Router and the network or host. 3. 4. Select Enabled or Disabled for this entry on the Status drop-down list. Click the Save button to make the entry take effect.
Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen.
4.12.2 System Routing Table
Choose menu Advanced Routing System Routing Table, and you can views all of the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface will be displayed for each entry.
Destination IP Address - The Destination IP Address is the address of the network or host to which the static route is assigned.

- 73 -

Subnet Mask - The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion. Gateway - This is the IP address of the gateway device that allows for contact between the Router and the network or host. Interface - This interface tells you whether the Destination IP Address is on the LAN & WLAN (internal wired and wireless networks), the WAN(Internet). Click the Refresh button to refresh the data displayed.

4.15.1 Comexe.cn DDNS

If the dynamic DNS Service Provider you select is www.comexe.cn, the page will appear as shown in Figure 4-68.
Figure 4-68 Comexe.cn DDNS Settings
To set up for DDNS, follow these instructions: 1. 2. 3. 4. Type the Domain Name received from your dynamic DNS service provider. Type the User Name for your DDNS account. Type the Password for your DDNS account. Click the Login button to log in to the DDNS service.
Connection Status -The status of the DDNS service connection is displayed here.

- 79 -

TL-WR740N/TL-WR741ND Click Logout to log out of the DDNS service.

4.15.2 Dyndns.org DDNS

If the dynamic DNS Service Provider you select is www.dyndns.org, the page will appear as shown in Figure 4-69.
Figure 4-69 Dyndns.org DDNS Settings
To set up for DDNS, follow these instructions: 1. 2. 3. 4. Type the User Name for your DDNS account. Type the Password for your DDNS account. Type the Domain Name you received from dynamic DNS service provider here. Click the Login button to log in to the DDNS service.
Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service.

4.15.3 No-ip.com DDNS

If the dynamic DNS Service Provider you select is www.no-ip.com, the page will appear as shown in Figure 4-68.

- 80 -

Figure 4-70 No-ip.com DDNS Settings
To set up for DDNS, follow these instructions: 1. 2. 3. 4. Type the User Name for your DDNS account. Type the Password for your DDNS account. Type the Domain Name you received from dynamic DNS service provider. Click the Login button to log in the DDNS service.
Connection Status - The status of the DDNS service connection is displayed here. Click Logout to log out the DDNS service.

4.16 System Tools

Figure 4-71 The System Tools menu

- 81 -

Choose menu System Tools, you can see the submenus under the main menu: Time Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password, System Log and Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

4.16.1 Time Settings

Choose menu System Tools Time Settings, you can configure the time on the following screen.
Figure 4-72 Time settings
Time Zone - Select your local time zone from this pull down list. Date - Enter your local date in MM/DD/YY into the right blanks. Time - Enter your local time in HH/MM/SS into the right blanks. NTP Server Prior - Enter the address for the NTP Server, then the Router will get the time from the NTP Server preferentially. In addition, for some built-in common NTP Servers, the Router can get time automatically once it connects the Internet. To configure the system manually: 1. 2. 3. Select your local time zone. Enter date and time in the right blanks. Click Save to save the configuration.

- 89 -

Log Level - By selecting the log level, only logs of this level will be shown. Refresh - Refresh the page to show the latest log list. Save Log - Click to save all the logs in a txt file. Mail Log - Click to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in the later log soon. Clear Log - All the logs will be deleted from the Router permanently, not just from the page. Click the Next button to go to the next page, or click the Previous button return to the previous page.

4.16.9 Statistics

Choose menu System Tools Statistics, you can view the statistics of the Router, including total traffic and current traffic of the last Packets Statistic Interval.

Figure 4-82 Statistics

Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. Packets Statistics Interval 5-60 - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of the packets statistic. Select the Auto-refresh checkbox to refresh automatically. Click the Refresh button to refresh immediately. Sorted Rules - Select a rule from the pull-down list to display the corresponding statistics. Click Reset All to reset the values of all the entries to zero.

- 90 -

TL-WR740N/TL-WR741ND Click Delete All to delete all entries in the table. Statistics Table:
IP Addess/MAC Address Packets Total Bytes Packets
The IP Address and MAC address are displayed with related statistics The number of packets received and transmitted by the Router. The number of bytes received and transmitted by the Router. The number of packets received and transmitted in the last Packets Statistic interval seconds. The number of bytes received and transmitted in the last Packets Statistic interval seconds.
The number of ICMP packets transmitted to the WAN per

ICMP Tx Current

second at the specified Packets Statistics interval. It is shown like "current transmitting rate / Max transmitting rate". The number of UDP packets transmitted to the WAN per

UDP Tx

second at the specified Packets Statistics interval. It is shown like "current transmitting rate / Max transmitting rate". The number of TCP SYN packets transmitted to the WAN per

TCP SYN Tx

Figure A-9

Figure A-10 5.
The wireless stations cannot connect to the Router. 1) 2) 3) Make sure the "Enable Wireless Router Radio" is checked. Make sure that the wireless stations' SSID accord with the Router's SSID. Make sure the wireless stations have right KEY for encryption when the Router is encrypted. 4) If the wireless connection is ready, but you cant access the Router, check the IP Address of your wireless stations. - 96 -
Appendix B: Configuring the PC
In this section, well introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapters manual if necessary. 1. Configure TCP/IP component 1) 2) On the Windows taskbar, click the Start button, and then click Control Panel. Click the Network and Internet Connections icon, and then click on the Network Connections tab in the appearing window. 3) Right click the icon that showed below, select Properties on the prompt page.
Figure 0-1 4) In the prompt page that showed below, double click on the Internet Protocol (TCP/IP).

- 97 -

Figure 0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: Setting IP address automatically Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the Figure below:

- 98 -

Figure 0-3 Note: For Windows 98 OS or before, the PC and Router may need to be restarted. Setting IP address manually Select Use the following IP address radio button. And the following items available If the Router's LAN IP address is 192.168.1.1, specify the IP address as 192.168.1.x (x is from 2 to 254), and the Subnet mask as 255.255.255.0. 3 Type the Routers LAN IP address (the default IP is 192.168.1.1) into the Default gateway field. 4 Select Use the following DNS server addresses. In the Preferred DNS Server field you
can enter the same value as the Default gateway or type the local DNS server IP address.

doc1

Siewert & Kau Computertechnik GmbH Walter-Gropius-Str. 12a DE 50126 Bergheim Telephone: 02271 - Fax: 02271 - E-Mail: office@siewert-kau.com Internet: http://www.siewert-kau.com
TP-Link TL-WR741ND Wireless Lite N Router
Wireless router, 4-port switch, 802.11b/g/n (draft), desktop
The TL-WR741ND is a combined wired/wireless network connection device integrated with internet-sharing router and 4-port switch. The wireless Lite-N Router is 802.11b/g compatible based on 802.11n technology and gives you 802.11n performance up to 150Mbps at an even more affordable price. Bordering on 11n and surpassing 11g speed enables high bandwidth consuming applications like video streaming to be more fluid. You can enjoy a high quality experience when video streaming, VoIP, or online gaming wirelessly, with traditional g products was never very practical, from anywhere in your entire home. Step into the 11n age with Wireless Lite N!When working with IEEE802.11n devices, the router provides robust and steady connections even at far distances from the router or existing obstacles in the way where normally 11G products would be weak and unstable. Better still, it's backward compatible with existing 802.11b/g products. General information
TP-Link Category Article number Bridges & Routers 310160 TL-WR741ND(DE)

Technical specifications

Product Description Device Type Form Factor Enclosure Type Data Link Protocol Network / Transport Protocol Routing Protocol Remote Management Protocol Features TP-Link TL-WR741ND Wireless Lite N Router - wireless router - 802.11b/g/n (draft) - desktop Wireless router - 4-port switch (integrated) External Desktop Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft) TCP/IP, ICMP/IP, PPPoE, DHCP, DNS Static IP routing HTTP Firewall protection, dynamic IP address assignment , NAT support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), DoS attack prevention, dynamic DNS server, MAC address filtering, VPN passthrough, URL filtering, parental control, IP address filtering, firmware upgradable, SNTP support, Quality of Service (QoS), virtual server support, DHCP server IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft), UPnP 17.4 cm x 11.1 cm x 3 cm Germany
Compliant Standards Dimensions (WxDxH) Localisation
More detailed technical specifications
General Device Type Form Factor Enclosure Type Width Connectivity Technology Depth Data Link Protocol Height Network / Transport Protocol Routing Protocol Localisation Remote Management Protocol Encryption Algorithm Features Wireless router - 4-port switch (integrated) External Desktop 17.4 cm Wireless, wired 11.1 cm Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft) 3 cm TCP/IP, ICMP/IP, PPPoE, DHCP, DNS Static IP routing Germany HTTP AES, 128-bit WEP, 64-bit WEP, 152-bit WEP, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK Firewall protection, dynamic IP address assignment , NAT support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), DoS attack prevention, dynamic DNS server, MAC address filtering, VPN passthrough, URL filtering, parental control, IP address filtering, firmware upgradable, SNTP support, Quality of Service (QoS), virtual server support, DHCP server IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft), UPnP Power, system
Compliant Standards Status Indicators Networking Connectivity Technology Integrated Switch Line Coding Format Data Link Protocol
Wireless, wired 4-port switch DBPSK, DQPSK, CCK, 64 QAM, 16 QAM, OFDM Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum Method Switching Protocol Network / Transport Protocol Routing Protocol Remote Management Protocol Status Indicators Features
DSSS Ethernet TCP/IP, ICMP/IP, PPPoE, DHCP, DNS Static IP routing HTTP Power, system Firewall protection, dynamic IP address assignment , NAT support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), DoS attack prevention, dynamic DNS server, MAC address filtering, VPN passthrough, URL filtering, parental control, IP address filtering, firmware upgradable, SNTP support, Quality of Service (QoS), virtual server support, DHCP server IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft)

Compliant Standards Line Properties Line Coding Format Expansion / Connectivity Interfaces
DBPSK, DQPSK, CCK, 64 QAM, 16 QAM, OFDM
LAN : 4 x 10Base-T/100Base-TX - RJ-45 WAN : 1 x 10Base-T/100Base-TX - RJ-45 Antenna : 1 x SMA
Aerial Aerial Antenna Qty Directivity Gain Level Power Power Device Miscellaneous Width Depth Height Compliant Standards 17.4 cm 11.1 cm 3 cm CE, EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, EN 300.328, EN 301.489.1, EN 301.489.17, FCC Part 15 B, EN 60950-1 Germany AES, 128-bit WEP, 64-bit WEP, 152-bit WEP, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK Power adapter - external External detachable 1 Omni-directional 3 dBi
Localisation Encryption Algorithm Software / System Requirements Software Included Environmental Parameters Min Operating Temperature Max Operating Temperature Humidity Range Operating

Drivers & Utilities

0 C 40 C 10 - 90%
Siewert & Kau take no accountability nor guarantee that all information contained on these pages is current and complete.

 

Technical specifications

Full description

The TL-WR741ND is a combined wired/wireless network connection device integrated with internet-sharing router and 4-port switch. The wireless Lite-N Router is 802.11b/g compatible based on 802.11n technology and gives you 802.11n performance up to 150Mbps at an even more affordable price. Bordering on 11n and surpassing 11g speed enables high bandwidth consuming applications like video streaming to be more fluid. You can enjoy a high quality experience when video streaming, VoIP, or online gaming wirelessly, with traditional g products was never very practical, from anywhere in your entire home. Step into the 11n age with Wireless Lite N! When working with IEEE802.11n devices, the router provides robust and steady connections even at far distances from the router or existing obstacles in the way where normally 11G products would be weak and unstable. Better still, it's backward compatible with existing 802.11b/g products.

General
Device TypeWireless router
Form FactorExternal
Width6.9 in
Depth4.4 in
Height1.2 in
Networking
Connectivity TechnologyWireless, wired
Integrated Switch4-port switch
Line Coding FormatDBPSK, DQPSK, CCK, 64 QAM, 16 QAM, OFDM
Data Link ProtocolEthernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum MethodDSSS
Switching ProtocolEthernet
Network / Transport ProtocolTCP/IP, ICMP/IP, PPPoE, DHCP, DNS
Routing ProtocolStatic IP routing
Remote Management ProtocolHTTP
Status IndicatorsPower, system
FeaturesFirewall protection, dynamic IP address assignment , NAT support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), DoS attack prevention, dynamic DNS server, MAC address filtering, VPN passthrough, URL filtering, parental control, IP address filtering, firmware upgradable, SNTP support, Quality of Service (QoS), virtual server support, DHCP server
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft)
Antenna
AntennaExternal detachable
Antenna Qty1
DirectivityOmni-directional
Gain Level3 dBi
Expansion / Connectivity
Interfaces4 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( WAN ) 1 x antenna - SMA
Miscellaneous
Encryption AlgorithmAES, 128-bit WEP, 64-bit WEP, 152-bit WEP, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK
Compliant StandardsCE, EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, UPnP, EN 300.328, EN 301.489.1, EN 301.489.17, FCC Part 15 B, EN 60950-1
Power
Power DevicePower adapter - external
Software / System Requirements
Software IncludedDrivers & Utilities
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating10 - 90%
Universal Product Identifiers
BrandTP-LINK Technologies
Part NumberTL-WR741ND
GTIN06935364051310, 05704875029764, 00845973051310

 

Tags

PC Gtr2 LN32A330 SF-4000 Htib 1000 DB 510 HR2094 01 340S2 Control IP8100-1 Kurzweil SP3 LQ-300 LD-2040WH Gpsmap 180 AI7-G Dualmaster 47PFL5603H SGH-T469 Triobrake Nokia 2280 Grand MP250 BCD-165D Stylus T26 LE52F96BD L1719S-BF GZ-MG26E DCC-2200 CCD-TR427E PW50-2006 ATS-909 Scanjet 5590 90-250MM Motorola V365 15PFL4122 XR-P350 Airtronics M11X 20PF7835 FX-9750G ERE3500 JC-120 RM-TP504 Fulcrum Tessara E3510 HT-KP30 BDP-N460 Satellite M40X P4dual-915GL 14PV284-39S Openwrt HDR-CX520 Alchemist DK9660-M FE-25 G-220 V2 M2NDH ICF-C153 KDC-8024 42PQV RXV 550 DVP5982 DV-SV9C Beatb EB612 Xtreme 6050 DMR-XW400 GO 520T VPL-ES7 Dimage E500 BDM 755S Meter MC DSC 500 EH2511 OW3000 Alimentos WS-FV10C 42PC3RV-TJ Singer 7462 Csue9JKE Desktop SLV695HF DEH-P88RS RQ-SX41 XV250TC EC 270 Satellite 2180 HT502 FRT21inlh KH 1170 Vivicam 3740 TK-260G N68-GE FAX2900 Blazer-2001 Tucson CM84 Compaq 510 Aspire T600 Pclk-MN10A LS-K1860HL ZWG6125 TXL37D28ES

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101