DECT1480 Series User's Guide

What's in the box?

DECT1480 base with answering system and cordless handset

You will also find:

Accessory handset and charger Not pictured: - Rechargeable battery (BT-1007) - Battery cover - AC adapter (PS-0035) If you purchased model number: DECT1480-2 DECT1480-3 DECT1480-4 DECT1480-5 DECT1480-6 You should have: 1 of each 2 of each 3 of each 4 of each 5 of each

Battery cover

If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need help? Get answers 24/7 at our website: www.uniden.com. If You. Contact Unidens. have a question or problem Customer Care Line* Phone Number 817-858-2929 or 800-297-1023 need a replacement part or an Parts Department* 800-554-3988 accessory need special assistance due to 800-874-9314 Accessibility Help Line a disability (voice or TTY) * During regular business hours, Central Standard Time; see our website for detailed business hours.
2009 Uniden America Corp. Ft. Worth, Texas Printed in China UNZZ01107BZ(0)
Not pictured: - Rechargeable battery (BT-1007) - AC adapter (PS-0035) - Telephone cord

Whats in the manual?

Answering System Options Getting Started.. 3 (Ans. Setup).. 15 Installing Your Phone. 3 Accessing the Answering Getting to Know Your Phone. 5 System.. 16 Using the Menu.. 8 Personalizing the Greeting. 17 Using Your Phone.. 10 Getting Your Messages. 18 Basics... 10 Using the System While You're Using the Phonebook. 12 Away from Home.. 19 Finding a Lost Handset. 13. Important Information.. 20 Using Special Features. 13 Solving Problems.. 20 Chain Dialing.. 13 AC Adapter and Battery Multihandset Features. 13 Information.. 23 Voice Message Notification. 15 Compliance Information. 24 Using the Answering System. 15 1-Year Limited Warranty. 27 When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
Important Safety Instructions!
This unit is NOT waterproof. DO NOT expose this unit to rain or moisture. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Do not place the handset in any charging cradle without the battery installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS! CAUTION! Risk of explosion if battery is replaced by an incorrect type! Dispose of used batteries according to the instructions. Do not open or mutilate the battery. Disconnect the battery before shipping this product.
For more details, see the Important Information section.

Getting Started

Installing Your Phone

Charge the Battery

1. Unpack all handsets, battery packs, and battery covers. If you need to remove a battery cover, press in on the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside the handset. (The battery connector will only fit one way.) 4. Replace the battery cover and slide it into place.
. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.

Handset keys/LEDs and how they work

Key (icon)

Clear/ intercom

Talk/flash

What it does - In standby: start an intercom call. - During a call: put the call on hold and start a call transfer to another handset. - While entering text: delete one character, or press and hold to delete all the characters. - In standby: start a telephone call (get a dial tone). - During a call: switch to a waiting call.
What it does - During a call: hang up. End - In the menu or any list: exit and go to standby. - In standby: open the menu. Menu/select - In the menu or any list: select the highlighted item. - In standby: increase the ringer volume. - During a call: increase the audio volume. Up ( ) - In any menu or list: move the cursor up one line. - In standby: decrease the ringer volume. - During a call: decrease the audio volume. Down ( ) - In any menu or list: move the cursor down one line. - In standby or during a call: open the phonebook. Phonebook/ - In the menu: go back to the previous screen. left ( ) - During text entry: move the cursor to the left. Caller ID/ - In standby or during a call: open the Caller ID list. - During text entry: move the cursor to the right. right ( ) - In standby: open the redial list. Redial/ - While entering a phone number: insert a 2-second pause pause. - In standby: access your answering system. messages/ - During a call: mute the microphone. mute ( ) - If the phone is ringing: mute the ringer for this call only. Speaker ( ) - Switch a normal call to the speakerphone (& back). LED What it means - On: the battery is charging. Status - Blinking: there are new messages. This table shows possible status icons and what they mean. Since the icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time.

Reading the Display

What it means The ringer is turned off and will not ring for new calls. You have a voice message waiting. Privacy Mode is on: no other handset can join the call. The speakerphone is on. The microphone is muted; the caller can't hear you. T-coil mode is on (see page 21). The battery is 1) fully charged, 2) half charged, 3) getting low, or 4) empty. Enter 1) capital or 2) lower case letters (see page 9). If you open the menu during a call, use LEFT to back out of the menu without hanging up. If you don't press any keys for about thirty seconds, the handset exits the menu.

[Aa] [aA]

Using the Menu

To open the menu, press

MENU/SELECT.
The cursor shows the highlighted option. To move the cursor, use UP & DOWN.
Press MENU/SELECT to choose the highlighted option.
Handset Setup Ans. Setup Day & Time
To go back a screen, press
<HANDSET SETUP> T-coil Ringer Tones
You can change these settings separately for each handset. Turn on T-coil mode to reduce noise on some hearing T-coil aids (for more details, see page 21). Choose this handset's ring tone. As you highlight each Ringer Tones ring tone, the phone plays a sample. When you hear the tone you want, press Menu/select.

PHONEBOOK/LEFT

press END to exit the menu.

Handset Setup Menu

AutoTalk
Any Key Answer Banner Handset Change the display language. Language Key Touch Tone Have the keypad sound a tone when you press a key. Refer to page 15 for details on setting up your answering system.
Have this handset answer a call when you pick it up from the cradle (without pressing any buttons). Have this handset answer a call when you press any key on the 12-key dialpad. Change the name used on the handset's display.

Ans Setup Menu

Use this menu to set the clock manually. (If you have Caller ID, the phone sets the day and time from the CID data.) Select the day of week, then use the number keypad to enter the hour and minutes in HHMM format (e.g., enter 0345 for 3:45). Then, select AM or PM.

Day & Time Menu

The settings on this menu affect all handsets. Only one handset at a time can change these menu options.

Global Setup Menu

Dial Mode

Set Line Mode VMWI Reset

Change the way your phone communicates with the telephone network (see page 4). Do not change this setting unless instructed to by customer service. Reset your Visual Message Waiting Indicator to bring it back in sync with your voice mail service.
Use the 12-key dial pad when you want to enter text into your phone (a name in the phonebook, the handset banner, etc.). The phone defaults to a capital letter for the first letter and any letter after a space; otherwise, it uses small letters.
Entering Text on Your Phone
To switch to all capital letters, press. The phone defaults to all capital letters first (e. g. ABCabc2) until you enter a blank space or press again. (Any time you want to change case, just press.) If two letters in a row use the same number key, enter the first letter and wait a few seconds (or press RIGHT); the cursor will move to the next space. Enter the next letter. Press # to enter a blank space. To change a letter, move the cursor to that letter and press CLEAR to erase the letter. Then, enter the new one. To erase the entire entry, press and hold CLEAR. Press 0 to cycle through all available symbols and punctuation.

Using Your Phone

Basics
To. make a call: Dial the number, then answer a call hang up switch between the speaker & earpiece mute the microphone during a call put a call on hold return to a call on hold mute the ringer for this call only
Earpiece Press Talk/flash.
Speakerphone Press Speaker.
Press Talk/flash. Press Speaker. Press End or put the handset in the cradle. Press Speaker. Press messages/mute. Press again to turn the microphone back on. Press Clear/intercom. After 5 minutes on hold, the call will be disconnected. Press Talk/flash. Press Speaker. While the phone is ringing, press messages/ mute.
You can set speaker volume levels separately for the base and each handset. You can also set the earpiece volume on each handset. Anytime you are listening to a speaker or earpiece, press Up to increase the volume and Down to decrease it. 10

Changing the Volume

You can also set the ringer volume separately: when the phone is in standby, press Up to increase the ringer volume and Down to decrease. If you turn the ringer volume all the way down, the ringer turns off.
Caller ID (CID) is a service available from your telephone provider that shows the phone number (and sometimes the callers name) of incoming calls. Contact your telephone provider for more information.
Using the Caller ID and Redial Lists
Caller ID list Redial list - When a call comes in, the phone displays the - Each handset number and name (if available) of the caller. remembers the last 5 numbers - The phone saves the information for the last you dialed on it. 30 received calls to the CID list. The redial list is - When its in standby, the handset shows how separate for each many calls came in since the last time you handset. checked the CID list.
All handsets share the CID list; only one handset can access

the CID list at a time.

To Follow these steps: Open the CID list Press Caller ID/right. Redial/pause. Open the redial list Scroll through the Press DOWN to scroll from newest to oldest. lists Press UP to scroll from oldest to newest. Dial a number from Highlight the number you want and press Talk/ the lists flash or speaker.* Close the lists Press Phonebook/left. * If the number is a toll or long distance call, but there's no 1 at the front of the CID record, press to add the 1 before dialing.
To select a number, highlight the number and press Menu/select. The phone gives you the following options: Delete Entry Erase the number from the list.

Store Into Pb Delete All

Add the number to the phonebook. The handset prompts you to edit the name and number. (CID list only) Erase all numbers from the list.
Call Waiting, a service available from your telephone provider, lets you receive calls while you are on another call. Caller ID on Call Waiting (CIDCW) service displays Caller ID information for a waiting call.

Using Call Waiting

If you get a Call Waiting call, the phone sounds a tone and displays any CID information received from the waiting call. Press Talk/flash to switch between the current call and the waiting call; each time you switch, there is a short pause before you're connected to the other call. The phone can store up to 70 entries in its phonebook. All handsets share the same phonebook, so only one handset may access the phonebook at a time. To. Press. Open/close the phonebook Phonebook/left.

Using the Phonebook

Scroll through the entries Jump to entries that start with a certain letter Dial an entry
Down (to scroll through the phonebook from A to Z) or Up (to scroll from Z to A).
the number key corresponding to the letter you want. Up or Down to find the entry you want to dial, then press Talk/flash or Speaker.
Open the phonebook with the phone in standby, then press Menu/ select to open the phonebook menu. Choose one of these options:

Phonebook Menu Options

Create New

Delete All 12

Add an entry to your phonebook. The phone prompts you to enter a name and number. Erase all the entries in the phonebook.
If you need the phone to pause before sending the next set of digits, press Redial/pause to insert a 2-second pause. The pause shows as a P in the display. You can insert as many pauses as you need, but each pause counts as one of your 20 digits. With the phone in standby, open the phonebook and find the entry you want. Press Menu/select to open the individual phonebook entry menu. The phone prompts you to edit or delete the entry.

Phonebook Entry Options

With the phone in standby, press Find on the base. All the handsets will beep in a 3-beep pattern for 1 minute or until you press Find again. You can also end the page by pressing any key from the found handset.

Finding a Lost Handset

Using Special Features

Chain Dialing

Voice Message Notification
Using the Answering System
You can set or change the answering system options from any handset. Just open the menu and select Ans. Setup. Select one of the following:
Answering System Options (Ans. Setup)

Security Code Ring Time

Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see page 19). Set the number of rings (2, 4, or 6) before the answering system answers the phone. Choose Toll Saver to have the system pick up after 2 rings if you have new messages or after 4 rings if you don't.
Record Time Message Alert Ans. Language Call Screen Ans. On/off
Set the amount of time (1 or 4 minutes) callers have to leave a message. Choose Announce Only if you don't want the system to let callers to leave a message. Have the system beep every 15 seconds when you have a new message; the beeping stops when you listen to all your new messages. (To mute the alert without listening to your messages, press any key on the base.) Change the language of the system's voice prompts. Turn on the call screen feature so you can hear callers as they leave messages on the base speaker (see page 18). Turn your answering system on or off. (To turn your system on or off from the base, just press On/off.)
You can access your system from a handset whenever the phone is in standby. Press MESSAGES/MUTE to start
Accessing the Answering System

remote operation mode.

Use PHONEBOOK/ LEFT to go to the previous option:
4:Delete 3:Skip 2:Play 1:Repeat

5:Stop [ / /select]

Use CALLER ID/ RIGHT to go to the next option:
6:SelectGreeting 8:RecNewGreeting
Press MENU/ SELECT to choose the displayed option.
During remote operation, the phone beeps to let you know it's waiting for your next command. You can press the number key next to the commands instead of scrolling through them. 16
Press END to exit remote operation mode.
If you take no action for 30 seconds, the phone returns to standby. Only one handset can access the system at a time.
Your personal outgoing message or greeting can be between 3 seconds and 30 seconds long. If you don't want to record a greeting, the system uses a prerecorded greeting: Hello, no one is available to take your call. Please leave a message after the tone. After you record a greeting, you can switch between the prerecorded greeting to your personal greeting at any time.
Personalizing the Greeting
1. Access the answering system from any handset. Wait until the system finishes its announcements, or press 5 (Stop) to skip them.
Record a Personal Greeting
2. Press 8 (RecNewGreeting).
. Wait for the system to say "Record greeting," then begin speaking. 4. When you're finished, press 8 to stop recording. The system plays back your new greeting. 1. Access the answering system from any handset. Wait until the system finishes its announcements or press 5 (Stop) to skip them. To keep this greeting, press End. To re-record it, go back to step 2.

Switch Between the Two Greetings
. Press 6 again to switch greetings.
2. Press 6 (SelectGreeting) to play back the current greeting.
Switch to your personal greeting following the steps above, then press 4 (Delete) while the system is playing back your greeting.

Delete Your Greeting

Getting Your Messages
From a handset (remote operation) Press Play/stop. Press Messages/mute. The system announces the number of new and old play new messages, then plays each new message (followed by messages the time and date) in the order it was received. replay an earlier Within 2 seconds after a message starts playing, press REV. select 1:Repeat. message Wait at least 5 seconds Wait at least 3 seconds after restart the after a message starts a message starts playing, current message playing, then select 1: then press REV. Repeat. skip a message Press FWD. Select 3:Skip. delete a While the message is playing, While the message is message press Delete. playing, Select 4:Delete. With the phone in standby, delete all of press Delete. When Not available. your messages prompted, press Delete again. After the system plays all new messages, play old messages press Play/stop again. Select 2:Play. stop playback press Play/stop. Select 5:Stop. To. From the base Another feature your answering system gives you is call screening. While the system is taking a message, you can hear the caller on the base speaker (if you turn on Call Screen) or from a handset. Only one handset at a time can screen calls. If another handset tries to screen the call, the second handset beeps and returns to standby.

Screening Your Calls

To. hear the caller leaving a message 18
From the base Listen to the caller over the speaker.

From a handset

Press Messages/mute.
To. From the base From a handset answer the call NA Press Talk/flash. mute the call screen Press End or return the Press Play/stop. without answering* handset to the cradle. * If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. You can also use your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.
Using the System While You're Away from Home
Programming a security code
1. With the phone in standby, open the menu from any handset. 2. Select Ans. Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when youre finished.

Remember to make a note of your new security code!
Dialing In to Your System
1. Call your telephone number and wait for the system to answer. (If your answering system is off, it will answer after ten rings and sound a series of beeps instead of your greeting.) 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. The system announces the current time, the number of messages stored in memory, and a help prompt. It will beep intermittently to let you know it's waiting for your command. 4. When you 01 Repeat message 05 Stop playback hear beeping, 02 Play message 06 Turn the system on enter a 2-digit 09 Turn the system off command from 03 Skip message 04 Delete message 10 Hear help prompts this chart:
If you don't press any keys for 15 seconds, the system hangs
up and return to standby.

Important Information

If you have any trouble with your phone, try these simple steps first. If you need help, call our Customer Care Line listed on the front cover. If Try - Checking the telephone cord connection. No handsets can make - Disconnecting the base AC adapter. Wait a few minutes, then reconnect it. or receive calls. - Making sure the base is plugged in. A handset cant make - Moving the handset closer to the base. or receive calls. A handset can make - Making sure the ringer is turned on. calls, but it wont ring. - Charging the battery for 15-20 hours. A handset is not working. - Checking the battery connection. - Moving the handset closer to the base. A handset says Unavailable. - Seeing if another handset is in Privacy Mode. - Letting calls ring twice before answering. No handsets display Caller ID information. - Making sure your Caller ID service is active. Caller ID displays - You may have to change the line mode. Contact Customer Service for instructions. briefly & then clears. - You may have to reset the handset. Contact I cant transfer calls. Customer Service for instructions. Two handsets cant - Making sure no handset is in Privacy Mode. talk to the caller. The answering system - Making sure the answering system is on. does not work. - Making sure the base is plugged in.

Solving Problems

Try - Making sure the Record Time is not set to The system won't Announce Only. record messages. - Deleting messages (memory may be full). A handset can't access - Seeing if another handset is using the system. the answering system. - Making sure the phone is in standby. - If there was a power failure, you may My outgoing message have to re-record your personal outgoing is gone. message. I cant hear the base - Making sure call screening is turned on. speaker. - Changing the base speaker volume. - The incoming messages may be too long. Messages are Remind callers to leave a brief message. incomplete. - Deleting messages (memory may be full). When I answer on an extension, the phone - You may have to change the line mode. Contact Customer Service for instructions keeps ringing (or keeps recording.) If a callers voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handsets battery may be weak. Try moving around while youre on a call or moving closer to the base to see if the sound gets louder. Make sure the handsets battery is fully charged. Try adjusting the earpiece volume.

Weak or Hard To Hear Audio
Do you use a T-Coil hearing aid? If you have a hearing aid equipped with a telecoil (T-coil) feature, the interaction between the hearing aid & digital cordless phones can cause noise in the handset. If you have a Tcoil hearing aid & you have problems with noise on the line, try turning on T-coil mode. Open the menu. Select Handset Setup, then select T-coil. Using T-coil mode can shorten the handsets talk time; make sure to watch the battery status and keep the battery charged.
Interference is the most common cause of noise or static on a cordless phone. Here are some common sources of interference:
N oise or Static on the Line
electrical appliances, especially microwave ovens computer equipment, especially wireless LAN equipment and DSL modems radio-based wireless devices, such as room monitors, wireless controllers, or wireless headphones or speakers fluorescent light fixtures (especially if giving off a buzzing noise) other services that use your phone line, like alarm systems, intercom systems, or broadband Internet service If static is on 1 handset or in 1 location: - Check nearby for one of the common interference sources. - Try moving the handset away from a suspected source, or try moving the suspected source so its not between the handset and the base. - There is always more noise at the edges of the base's range. If an Out of Range message displays, try moving closer to the base.
If static is on all handsets or in all locations: - Check near the base for the source of interference. - Try moving the base away from a suspected source, or turn off the source if possible. - If the base has an adjustable antenna, try raising the antenna so it stands straight up. - If you have any service that uses the phone line, you might need a filter (see below).
Sometimes, broadband Internet services that use the telephone line can interfere with phones. One of these servicesDSLoften causes static on telephones. A DSL filter or telephone line filter usually solves this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store. 22
Installing a Line Filter or DSL Filter
Plug the DSL filter into the telephone wall jack and plug your phones base into the filter. Make a test call to make sure the noise is gone. Moisture and liquid can damage your cordless phone.

Liquid Damage

If the exterior housing of the handset or base is exposed to moisture or liquid, wipe off the liquid, and use as normal. If moisture or liquid is inside the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow these steps: Handset Base 1. Disconnect the AC 1. Remove the battery cover and disconnect adapter to cut off the battery. the power. 2. Let dry for at least 3 days with the battery 2. Disconnect the disconnected and the cover off. telephone cord. 3. After the handset dries, reconnect the 3. Let dry for at least battery and replace the cover. Recharge the 3 days before battery fully (15-20 hours) before using. reconnecting.

CAUTION! DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.
AC Adapter and Battery Information
Use only the supplied AC adapters. Be sure to use the proper adapter for the base & any chargers. Do not place the power cord where it creates a trip hazard or where it could become chafed and create a Base/Charger fire or electrical hazard. Part number PS-0035 Do not place the unit in direct AC adapter Input voltage 120V AC, 60 Hz sunlight or subject it to high temperatures. Output voltage 8V AC @ 300mA Fully charged, the battery BT-1007 Battery Part number should provide about 10 pack Capacity 500mAh, 2.4V DC hours of talk time and about 7 23
days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged. When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery alert, finish your conversation as quickly as possible and return the handset to the cradle. If the handset is in standby, none of the keys will operate. With normal use, the battery should last about one year. Replace the battery when the talk time becomes short even when the battery is charged. To buy a replacement battery, call the Parts Department listed on the front cover.
conserving natural resources, Uniden voluntarily participates in an RBRC industry program to collect and recycle used Ni-Cd batteries within the United States. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area. (RBRC is a registered trademark of the Rechargeable Battery Recycling Corporation.) Rechargeable batteries must be recycled or disposed of properly. Uniden works to reduce lead content in PVC coated cords in our products & accessories. Warning! The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
Rechargeable Nickel-Cadmium Battery Warning
This equipment contains a rechargeable Nickel-Cadmium (Ni-Cd) battery. Cadmium and Nickel are chemicals known to the State of California to cause cancer. Do not short-circuit the battery. The rechargeable Ni-Cd batteries contained in this equipment may explode if disposed of in a fire. Do not charge the battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manual. Using another charger may damage the battery or cause it to explode. As part of our commitment to protecting our environment and

Industry Canada (I.C.) Notice
Terminal equipment NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. Radio equipment The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communica-
tions may not be ensured when using this telephone".

1-Year Limited Warranty

Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace

the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery
from the Product and separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155 As an Energy Star Partner, Uniden has determined that this product meets the Energy Star guidelines for energy efficiency. Energy Star is a U.S. registered mark. Uniden is a registered trademark of Uniden America Corporation. The pictures in this manual are for example only. Your phone may not look exactly like the pictures.
May be covered under one or more of the following U.S. patents: 7,206,403 7,310,398 7,460,663 Other patents pending.

DECT1480 Series User's Guide

What's in the box?

DECT1480 base with answering system and cordless handset

You will also find:

Accessory handset and charger Not pictured: - Rechargeable battery (BT-1007) - Battery cover - AC adapter (PS-0035) If you purchased model number: DECT1480-2 DECT1480-3 DECT1480-4 DECT1480-5 DECT1480-6 You should have: 1 of each 2 of each 3 of each 4 of each 5 of each

Battery cover

If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need help? Get answers 24/7 at our website: www.uniden.com. If You. Contact Unidens. have a question or problem Customer Care Line* Phone Number 817-858-2929 or 800-297-1023 need a replacement part or an Parts Department* 800-554-3988 accessory need special assistance due to 800-874-9314 Accessibility Help Line a disability (voice or TTY) * During regular business hours, Central Standard Time; see our website for detailed business hours.
2009 Uniden America Corp. Ft. Worth, Texas Printed in China UNZZ01107BZ(0)
Not pictured: - Rechargeable battery (BT-1007) - AC adapter (PS-0035) - Telephone cord

Whats in the manual?

Answering System Options Getting Started.. 3 (Ans. Setup).. 15 Installing Your Phone. 3 Accessing the Answering Getting to Know Your Phone. 5 System.. 16 Using the Menu.. 8 Personalizing the Greeting. 17 Using Your Phone.. 10 Getting Your Messages. 18 Basics... 10 Using the System While You're Using the Phonebook. 12 Away from Home.. 19 Finding a Lost Handset. 13. Important Information.. 20 Using Special Features. 13 Solving Problems.. 20 Chain Dialing.. 13 AC Adapter and Battery Multihandset Features. 13 Information.. 23 Voice Message Notification. 15 Compliance Information. 24 Using the Answering System. 15 1-Year Limited Warranty. 27 When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
Important Safety Instructions!
This unit is NOT waterproof. DO NOT expose this unit to rain or moisture. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Do not place the handset in any charging cradle without the battery installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS! CAUTION! Risk of explosion if battery is replaced by an incorrect type! Dispose of used batteries according to the instructions. Do not open or mutilate the battery. Disconnect the battery before shipping this product.
For more details, see the Important Information section.

Getting Started

Installing Your Phone

Charge the Battery

1. Unpack all handsets, battery packs, and battery covers. If you need to remove a battery cover, press in on the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside the handset. (The battery connector will only fit one way.) 4. Replace the battery cover and slide it into place.
. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.
. Connect the AC adapters to the AC IN 8V jacks on the base and on each charger. Set the plugs into the notches. Plug the other end of the adapters into standard 120V AC outlets.
7. Place one handset in the base and the other(s) in the charger(s) with the displays facing forward. The display on each handset should light up; if it doesnt, reseat the handset or try plugging the AC adapter into a different outlet.
Charge all handsets completely (about 15 hours) before using
Use the telephone cord to connect the TEL LINE jack on the base to a standard telephone wall jack.
Connect the Telephone Cord
1. Pick up the handset from the cradle and press Talk. You should hear a dial tone, and the display should say Talk. If you don't hear a dial tone or the display says Check Tel Line, try checking the connection between the base and the phone jack. 2. Make a quick test call. (Press End to hang up.) If you keep hearing a dial tone, try changing to pulse dialing mode. If there is a lot of noise, see page 21 for tips on avoiding interference. Test all your handsets the same way. If you can't get a dial tone, try moving the handset closer to the base.

Test the Connection

Your phone communicates with the telephone network in two ways: tone dialing or pulse dialing. Most telephone companies use tone dialing. If your phone company uses pulse dialing, you will need to change your phones dial mode.
Changing from Tone to Pulse Dialing
1. From a handset, open the menu and select Global Setup. (See page 8 for details on using the menu.) 2. Select Dial Mode, then select Pulse. The phone sounds a confirmation tone.
If you use pulse dialing and you need to send DTMF tones during a call (if you're using an automated response system, for example), press to temporarily switch to tone dialing. When the call ends, the phone automatically returns to pulse dialing mode.

Parts of the base

Earpiece

Parts of the handset

REV DOWN

Display

PHONEBOOK/ LEFT CLEAR/ INTERCOM DOWN TALK/ FLASH

PLAY/ UP FWD STOP

STATUS
UP CALLER ID/ RIGHT MENU/ SELECT END
Getting to Know Your Phone

Twelvekey dial pad

REDIAL/ PAUSE

DELETE FIND

Charging ANSWERING ON/OFF SYSTEM contacts STATUS

SPEAKER MESSAGES/ MUTE

Microphone Charging contacts
Base keys/LEDs and how they work
Key (icon) What it does - In standby: increase the ringer volume. Up (+) - While a message is playing: increase the speaker volume. - In standby: decrease the ringer volume. Down () - While a message is playing: decrease the speaker volume. FWD ( ) - While a message is playing: skip to the next message. - While playing messages: for the first 2 seconds, go to REV ( ) the previous message; after that: go to the start of the current message. - In standby: start playing messages. Play/stop - While a message is playing: stop playing messages. ( ) - If the phone is ringing: mute the ringer for this call only. On / OFF - In standby: turn the answering system on or off. - While a message is playing: delete this message. Delete ( ) - In standby: delete all messages. FinD - In standby: page all handsets. LED What it means - On: a message is playing. PLAY/STOP - Blinking: there are new messages. - On: the answering machine is on. Status - Off: the answering machine is off. - Blinking: the base is paging all handsets.
Handset keys/LEDs and how they work

Key (icon)

Clear/ intercom

Talk/flash

What it does - In standby: start an intercom call. - During a call: put the call on hold and start a call transfer to another handset. - While entering text: delete one character, or press and hold to delete all the characters. - In standby: start a telephone call (get a dial tone). - During a call: switch to a waiting call.
What it does - During a call: hang up. End - In the menu or any list: exit and go to standby. - In standby: open the menu. Menu/select - In the menu or any list: select the highlighted item. - In standby: increase the ringer volume. - During a call: increase the audio volume. Up ( ) - In any menu or list: move the cursor up one line. - In standby: decrease the ringer volume. - During a call: decrease the audio volume. Down ( ) - In any menu or list: move the cursor down one line. - In standby or during a call: open the phonebook. Phonebook/ - In the menu: go back to the previous screen. left ( ) - During text entry: move the cursor to the left. Caller ID/ - In standby or during a call: open the Caller ID list. - During text entry: move the cursor to the right. right ( ) - In standby: open the redial list. Redial/ - While entering a phone number: insert a 2-second pause pause. - In standby: access your answering system. messages/ - During a call: mute the microphone. mute ( ) - If the phone is ringing: mute the ringer for this call only. Speaker ( ) - Switch a normal call to the speakerphone (& back). LED What it means - On: the battery is charging. Status - Blinking: there are new messages. This table shows possible status icons and what they mean. Since the icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time.

Reading the Display

What it means The ringer is turned off and will not ring for new calls. You have a voice message waiting. Privacy Mode is on: no other handset can join the call. The speakerphone is on. The microphone is muted; the caller can't hear you. T-coil mode is on (see page 21). The battery is 1) fully charged, 2) half charged, 3) getting low, or 4) empty. Enter 1) capital or 2) lower case letters (see page 9). If you open the menu during a call, use LEFT to back out of the menu without hanging up. If you don't press any keys for about thirty seconds, the handset exits the menu.

[Aa] [aA]

Using the Menu

To open the menu, press

MENU/SELECT.
The cursor shows the highlighted option. To move the cursor, use UP & DOWN.
Press MENU/SELECT to choose the highlighted option.
Handset Setup Ans. Setup Day & Time
To go back a screen, press
<HANDSET SETUP> T-coil Ringer Tones
You can change these settings separately for each handset. Turn on T-coil mode to reduce noise on some hearing T-coil aids (for more details, see page 21). Choose this handset's ring tone. As you highlight each Ringer Tones ring tone, the phone plays a sample. When you hear the tone you want, press Menu/select.

PHONEBOOK/LEFT

press END to exit the menu.

Handset Setup Menu

AutoTalk
Any Key Answer Banner Handset Change the display language. Language Key Touch Tone Have the keypad sound a tone when you press a key. Refer to page 15 for details on setting up your answering system.
Have this handset answer a call when you pick it up from the cradle (without pressing any buttons). Have this handset answer a call when you press any key on the 12-key dialpad. Change the name used on the handset's display.

Ans Setup Menu

Use this menu to set the clock manually. (If you have Caller ID, the phone sets the day and time from the CID data.) Select the day of week, then use the number keypad to enter the hour and minutes in HHMM format (e.g., enter 0345 for 3:45). Then, select AM or PM.

Day & Time Menu

The settings on this menu affect all handsets. Only one handset at a time can change these menu options.

Global Setup Menu

Dial Mode

Set Line Mode VMWI Reset

Change the way your phone communicates with the telephone network (see page 4). Do not change this setting unless instructed to by customer service. Reset your Visual Message Waiting Indicator to bring it back in sync with your voice mail service.
Use the 12-key dial pad when you want to enter text into your phone (a name in the phonebook, the handset banner, etc.). The phone defaults to a capital letter for the first letter and any letter after a space; otherwise, it uses small letters.
Entering Text on Your Phone
To switch to all capital letters, press. The phone defaults to all capital letters first (e. g. ABCabc2) until you enter a blank space or press again. (Any time you want to change case, just press.) If two letters in a row use the same number key, enter the first letter and wait a few seconds (or press RIGHT); the cursor will move to the next space. Enter the next letter. Press # to enter a blank space. To change a letter, move the cursor to that letter and press CLEAR to erase the letter. Then, enter the new one. To erase the entire entry, press and hold CLEAR. Press 0 to cycle through all available symbols and punctuation.

Using Your Phone

Basics
To. make a call: Dial the number, then answer a call hang up switch between the speaker & earpiece mute the microphone during a call put a call on hold return to a call on hold mute the ringer for this call only
Earpiece Press Talk/flash.
Speakerphone Press Speaker.
Press Talk/flash. Press Speaker. Press End or put the handset in the cradle. Press Speaker. Press messages/mute. Press again to turn the microphone back on. Press Clear/intercom. After 5 minutes on hold, the call will be disconnected. Press Talk/flash. Press Speaker. While the phone is ringing, press messages/ mute.
You can set speaker volume levels separately for the base and each handset. You can also set the earpiece volume on each handset. Anytime you are listening to a speaker or earpiece, press Up to increase the volume and Down to decrease it. 10

Changing the Volume

You can also set the ringer volume separately: when the phone is in standby, press Up to increase the ringer volume and Down to decrease. If you turn the ringer volume all the way down, the ringer turns off.
Caller ID (CID) is a service available from your telephone provider that shows the phone number (and sometimes the callers name) of incoming calls. Contact your telephone provider for more information.
Using the Caller ID and Redial Lists
Caller ID list Redial list - When a call comes in, the phone displays the - Each handset number and name (if available) of the caller. remembers the last 5 numbers - The phone saves the information for the last you dialed on it. 30 received calls to the CID list. The redial list is - When its in standby, the handset shows how separate for each many calls came in since the last time you handset. checked the CID list.
All handsets share the CID list; only one handset can access

the CID list at a time.

To Follow these steps: Open the CID list Press Caller ID/right. Redial/pause. Open the redial list Scroll through the Press DOWN to scroll from newest to oldest. lists Press UP to scroll from oldest to newest. Dial a number from Highlight the number you want and press Talk/ the lists flash or speaker.* Close the lists Press Phonebook/left. * If the number is a toll or long distance call, but there's no 1 at the front of the CID record, press to add the 1 before dialing.
To select a number, highlight the number and press Menu/select. The phone gives you the following options: Delete Entry Erase the number from the list.

Store Into Pb Delete All

Add the number to the phonebook. The handset prompts you to edit the name and number. (CID list only) Erase all numbers from the list.
Call Waiting, a service available from your telephone provider, lets you receive calls while you are on another call. Caller ID on Call Waiting (CIDCW) service displays Caller ID information for a waiting call.

Multihandset Features

Conference Calling
When an outside call comes in, two handsets can join in a conference call with the outside caller. 13
To join the call, just press Talk/flash or Speaker. To leave the conference call, hang up normally; the other handset remains connected to the call. To prevent other handsets from joining a call:
1. Start your call as usual, then press Menu/select. The display shows Call Privacy. 2. Press Menu/select again to turn privacy mode on (you'll see a in the display). Privacy mode turns off automatically when you hang up. As long you have privacy mode on, no other handsets can interrupt your call. To accept another handset in the call, turn privacy mode off by repeating the process above (press Menu/ select twice).

Privacy Mode

Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line. You can make an intercom call from any handset, but only two handsets can be in an intercom call at any time. If an outside call comes in during an intercom page, the phone cancels the page so you can answer the incoming call. If an outside call comes in during an intercom call, press Talk/flash to hang up the intercom call and answer the outside call.

Intercom

make an intercom page cancel a page answer a page end an intercom call
Follow these steps: 1. Press Clear/intercom. 2. Select the handset you want to talk with, or All to page all handsets at the same time. Press End. Press Clear/intercom or Talk/flash. Press End. Both handsets return to standby.

Call Transfer

To. Follow these steps: 1. Press Clear/intercom to put the call on hold. 2. Select the handset you want to page (select All to transfer a call page all handsets at the same time). 3. When another handset accepts the call, you'll be disconnected (press Talk/flash to rejoin the call). cancel a transfer Press Talk/flash to return to the call. 1. To answer the page and speak to the transferring accept a handset using the intercom, press Clear/intercom. transferred call 2. To speak to the outside caller, press Talk/flash. If you subscribe to a voice mail service, your phone can notify you when you have a new message waiting. This feature supports Frequency-Shift Keying (FSK) message notification. Contact your voice mail provider for information. When you have new messages, the voice message icon appears in the display, and the Status light on the handset blinks. After you listen to your messages, the voice message icon turns off. If it doesnt, you can reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.

Personalizing the Greeting
1. Access the answering system from any handset. Wait until the system finishes its announcements, or press 5 (Stop) to skip them.
Record a Personal Greeting
2. Press 8 (RecNewGreeting).
. Wait for the system to say "Record greeting," then begin speaking. 4. When you're finished, press 8 to stop recording. The system plays back your new greeting. 1. Access the answering system from any handset. Wait until the system finishes its announcements or press 5 (Stop) to skip them. To keep this greeting, press End. To re-record it, go back to step 2.
Switch Between the Two Greetings
. Press 6 again to switch greetings.
2. Press 6 (SelectGreeting) to play back the current greeting.
Switch to your personal greeting following the steps above, then press 4 (Delete) while the system is playing back your greeting.

Delete Your Greeting

Getting Your Messages
From a handset (remote operation) Press Play/stop. Press Messages/mute. The system announces the number of new and old play new messages, then plays each new message (followed by messages the time and date) in the order it was received. replay an earlier Within 2 seconds after a message starts playing, press REV. select 1:Repeat. message Wait at least 5 seconds Wait at least 3 seconds after restart the after a message starts a message starts playing, current message playing, then select 1: then press REV. Repeat. skip a message Press FWD. Select 3:Skip. delete a While the message is playing, While the message is message press Delete. playing, Select 4:Delete. With the phone in standby, delete all of press Delete. When Not available. your messages prompted, press Delete again. After the system plays all new messages, play old messages press Play/stop again. Select 2:Play. stop playback press Play/stop. Select 5:Stop. To. From the base Another feature your answering system gives you is call screening. While the system is taking a message, you can hear the caller on the base speaker (if you turn on Call Screen) or from a handset. Only one handset at a time can screen calls. If another handset tries to screen the call, the second handset beeps and returns to standby.

If static is on all handsets or in all locations: - Check near the base for the source of interference. - Try moving the base away from a suspected source, or turn off the source if possible. - If the base has an adjustable antenna, try raising the antenna so it stands straight up. - If you have any service that uses the phone line, you might need a filter (see below).
Sometimes, broadband Internet services that use the telephone line can interfere with phones. One of these servicesDSLoften causes static on telephones. A DSL filter or telephone line filter usually solves this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store. 22
Installing a Line Filter or DSL Filter
Plug the DSL filter into the telephone wall jack and plug your phones base into the filter. Make a test call to make sure the noise is gone. Moisture and liquid can damage your cordless phone.

Liquid Damage

If the exterior housing of the handset or base is exposed to moisture or liquid, wipe off the liquid, and use as normal. If moisture or liquid is inside the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow these steps: Handset Base 1. Disconnect the AC 1. Remove the battery cover and disconnect adapter to cut off the battery. the power. 2. Let dry for at least 3 days with the battery 2. Disconnect the disconnected and the cover off. telephone cord. 3. After the handset dries, reconnect the 3. Let dry for at least battery and replace the cover. Recharge the 3 days before battery fully (15-20 hours) before using. reconnecting.
CAUTION! DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.
AC Adapter and Battery Information
Use only the supplied AC adapters. Be sure to use the proper adapter for the base & any chargers. Do not place the power cord where it creates a trip hazard or where it could become chafed and create a Base/Charger fire or electrical hazard. Part number PS-0035 Do not place the unit in direct AC adapter Input voltage 120V AC, 60 Hz sunlight or subject it to high temperatures. Output voltage 8V AC @ 300mA Fully charged, the battery BT-1007 Battery Part number should provide about 10 pack Capacity 500mAh, 2.4V DC hours of talk time and about 7 23

days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged. When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery alert, finish your conversation as quickly as possible and return the handset to the cradle. If the handset is in standby, none of the keys will operate. With normal use, the battery should last about one year. Replace the battery when the talk time becomes short even when the battery is charged. To buy a replacement battery, call the Parts Department listed on the front cover.
conserving natural resources, Uniden voluntarily participates in an RBRC industry program to collect and recycle used Ni-Cd batteries within the United States. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area. (RBRC is a registered trademark of the Rechargeable Battery Recycling Corporation.) Rechargeable batteries must be recycled or disposed of properly. Uniden works to reduce lead content in PVC coated cords in our products & accessories. Warning! The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
Rechargeable Nickel-Cadmium Battery Warning
This equipment contains a rechargeable Nickel-Cadmium (Ni-Cd) battery. Cadmium and Nickel are chemicals known to the State of California to cause cancer. Do not short-circuit the battery. The rechargeable Ni-Cd batteries contained in this equipment may explode if disposed of in a fire. Do not charge the battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manual. Using another charger may damage the battery or cause it to explode. As part of our commitment to protecting our environment and

Compliance Information

FCC Part 68 information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company. An applicable Universal Service Order Codes (USOC) certification for the jacks

used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a phone line. Excessive RENs on a phone line may result in devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the telephone provider. The REN for this product is part of the product identifier that has the format US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company
may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do not substitute or repair any parts of the device except as specified in this manual. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. This equipment is hearing aid compatible. If you experience trouble with this equipment, contact the manufacturer (see the cover of this manual for contact information) or an authorized agent. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. If your home has wired alarm equipment connected to a phone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable alarm equipment, contact your telephone company or a qualified installer. Any changes or modifications to this product not expressly approved by the manufacturer or other party responsible

for compliance could void your authority to operate this product. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended.

FCC Part 15 information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. FCC PART 15.105(b): Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Information
This product complies with FCC radiation exposure limits under the following conditions: The base must be placed to allow a minimum of 20 cm (8 inches) between the antenna and all persons during normal operation. The base must not be collocated or operated in conjunction with any other antenna or transmitter. The handset is designed for bodyworn operation and meets FCC RF exposure guidelines when used with any belt clip, carrying case, or other accessory supplied with this product. (All necessary accessories are included in the package; any additional or optional accessories are not required for compliance with the guidelines.) Third party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines.
Industry Canada (I.C.) Notice
Terminal equipment NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. Radio equipment The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communica-

from the Product and separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155 As an Energy Star Partner, Uniden has determined that this product meets the Energy Star guidelines for energy efficiency. Energy Star is a U.S. registered mark. Uniden is a registered trademark of Uniden America Corporation. The pictures in this manual are for example only. Your phone may not look exactly like the pictures.
May be covered under one or more of the following U.S. patents: 7,206,403 7,310,398 7,460,663 Other patents pending.