Yaesu FT-857D Quick Reference
No Menu Item 001 EXT MENU 002 144MHz ARS

003 430MHz ARS

004 AM&FM DIAL 005 AM MIC GAIN 006 AM STEP 007 APO TIME 008 ARTS BEEP 009 ARTS ID
Function Available Values Enables/Dis ables the extended Menu ON/OFF Mode. Activates/deactivates the Automatic ON/OFF Repeater Shift feature when operating on the 144 MHz band. Activates/deactivates the Automatic ON/OFF Repeater Shift feature when operating on the 430 MHz band. Enabling/disabling t he DIAL knob on t he AM ENABLE/DISABLE

and FM m odes.

Default OFF
No Menu Item 046 DSP HPF CUTOFF 047 DSP LPF CUTOFF
Function Adjusts the low-cut characteris tics of the DSP HPF filter. Adjusts the high-cut characteris tics of the DSP LPF filter. Sets the DSP microphone equalization pattern.
Available Values 100 ~ 1000 Hz 1000 ~ 6000 Hz

Default 100 Hz 6000 Hz

048 DSP MIC EQ
OFF/LPF/HPF/BOT H 1 ~ 16 ON/OFF 0 ~ 100 5/6.25/10/12.5/15/ 20/25/50 kHz ON/OFF DIAL/FREQ/PANE L/ALL ON/OFF CW SIDETONE,CW SPEED,MHz/MEM GRP,MIC GAIN, NB LEVEL,RF POWER, STEP ON/OFF NOR/RMT/CAT SIG, CTR, VLT, N/A, FS,OFF PWR, ALC, MOD, SWR,VLT, N/A, OFF ON/OFF 0 ~ 100 All Multi Function, All Menu Item , MONI, Q.SPL, TCALL, ATC and USER.

DISABLE 50

049 DSP NR LEVEL
Adjusts the microphone gain level for the AM m ode.
Selects the t uning st eps for t he SELECT knob on the AM m ode.
0 ~ 100 2.5/5/9/10/12.5/25 kHz OFF/1h ~ 6h OFF/RANGE/ALL ON/OFF OFF/1 sec ~ 255sec
Selects the Auto Power Off tim e (tim e before power goes off). Selects the ARTS beep mode.

OFF RANGE OFF YAESU OFF

Enables/dis ables the CW identifier during ARTS operation. Stores your calls ign into the CW identifier. 011 BEACON TEXT 1 Stores the message for the Beacon. 010 ARTS IDW 012 BEACON TIME Selects the interval tim e (between message and message).
Setting of the degree of DSP Noise Reduction. 050 EMERGENCY Enables Tx/Rx operation on the Alaska Em ergency Channel, 5167.5 kHz. 051 FM MIC GAIN Adjusts the microphone gain level for the FM mode. 052 FM STEP Selects the tuning steps for the SELECT knob in the FM mode. 053 HOME-->VFO Enables/dis ables the moving of HOME channel data to the VFO. 054 LOCK MODE Selects the operation of the front panels LOCK key. 055 MEM GROUP Enables/dis ables the mem ory grouping feature. 056 MEM TAG Stores Alpha-Numeric Tags for the m emory channels. 057 MEM/VFO DIAL MODE Selects the function which is engaged when you press the SELECT knob.

8 OFF 50

ON DIAL OFF MHz/MEM GRP
013 BEEP TONE 014 BEEP VOL 015 CAR LSB R
Selects the beep frequency. Selects the beep volum e level. Sets the Rx Carrier Point for LSB.
440/880/1760 Hz 0 ~ ~ +300 Hz

880Hz Hz

058 MIC SCAN 059 MIC SEL 060 MTR ARX SEL

016 CAR LSB T

Sets the Tx Carrier Point for LSB

300 ~ +300 Hz

061 MTR ATX SEL
017 CAR USB R 018 CAR USB T
Sets the Rx Carrier Point for USB Sets the Tx Carrier Point for USB
300 ~ +300 Hz 300 ~ +300 Hz

0 Hz 0 Hz

062 MTR PEAK HOLD 063 NB LEVEL 064 OP FILTER PG A
1 Volume 2 RF Gain 3 Select Knob (Push to tune Mhz) 4 Home 5 Clar / IF Shift 6 FunctionMenu / Hold for Menu 7 Menu Keys 8 Mode (LSB <> USB <> CW <> CWR <> AM <> FM <> DIG <> PKT <> LSB)

9 DSP Menu 10 Fast / Hold for Power 11 TX / Busy 12 Change Band 13 VFO / Memory 14 LOCK 15 Main Dial (select frequency or menu option) 16 Main Display

019 CAT RATE

Front Panel Menus
MFa MFb MFc MFd MFe MFf MFg MFh MFi A/B MW STO RPT TON/ENC ARTS SCN SCOP MTR A=B SKIP RCL REV ----/DEC SRCH PRI WID SPL TAG PROC VOX TDCH PMS DW STEP DISP MFj MFk MFl MFm MFn MFo MFp MFq SPOT TUNE NB IPO CFIL PLY1 DNR UPRG1 BK DWN AGC ATT FIL-1 PLY2 DNF UPRG2 KEY UP AGC SPD NAR FIL-2 PLY3 DBF UPRG3
Sets the transceivers circuitry for the 4800 bps/9600 4800bps CAT baud rate to be used. bps/38400 bps 020 CAT/LIN/TUN Selects the device which is connected CAT/LINEAR/TUN CAT to the CAT/LINEAR jack on the rear ER panel. 021 CLAR DIAL SEL Defines the control knob to be used SEL, MAIN SEL for setting of the clarifier offset frequency. 022 CW AUTO MODE Selects whether the KEY jack shall be ON/OFF OFF Enabled or Disabled while us ing the SSB/FM modes. 023 CW BFO Sets the CW carrier oscillator injection USB/LSB/AUTO USB side on the CW mode. 024 CW DELAY Sets the receiver recovery tim e during FULL/30 ~ m sec pseudo0VOX CW sem i-break-in m sec operation. 025 CW KEY REV Sets the keyer paddles wiring NORMAL/REVERS NORMAL configuration. E 026 CW PADDLE Enables/dis ables CW keying by the ELEKEY/MICKEY ELEKEY microphones [UP]/[DWN] keys. 027 CW PITCH Setting of the pitch of the CW 400 ~ 800 Hz 700 Hz sidetone, BFO offset, and CW filter center frequencies. 028 CW QSK Selects the tim e delay between when 10/15/20/25/ms the PTT is keyed and the carrier is ms transmitted during QSK operation when using the internal keyer. 029 CW SIDE TONE Setting of the CW sidetone volum e 0 ~ level. 030 CW SPEED Sets the sending speed for the built-in 4 ~ 60 wpm 12 wpm (60 cpm ) Electronic keyer. (1wpm /step)/20 ~ 300 cpm (5cpm/step) 031 CW TRAINING Sends random Morse Code fiveN, A, AN N character groups via the sidetone. 032 CW WEIGHT Sets the Dot:Dash ratio for the built-in 1:2.5 ~ 1:4.5 01:03.00 electronic keyer. 033 DCS CODE Setting of the DCS code. 104 Standard 23 DCS codes 034 DCS INV Selects Norm al or Inverted DCS Tn-Rn/Tn-Riv/TivTn-Rn coding. Rn/Tiv-Riv 035 DIAL STEP Setting of the DIAL knobs tuning FINE/COARSE FINE speed. 036 DIG DISP Defines the dis played frequency offset 3000 ~ +3000 Hz 0 Hz during DIG (USER-L or USER-U) mode operation. 037 DIG GAIN Adjusts the audio input level from 0 ~ terminal equipment during DIG (Digital) m ode operation. 038 DIG MODE Selects the mode and sideband in the RTTY-L/RTTYRTTY-L U/PSK31-L/RTTYDIG (Dig ital) m ode. L/PSK31-U/USERL/USER-U 039 DIG SHIFT Defines the carrier frequency offset 3000 ~ +3000 Hz 0 Hz during DIG (USER-L or USER-U) mode operation. 040 DIG VOX Sets the gain of the VOX circuitrys 0 ~ input level for the DIG m ode. 041 DISP COLOR Selects the illumination color for each operating status. 042 DISP CONTRAST Setting of the dis play contrast level. 043 DISP INTENSITY Setting of the dis play brightness level. 044 DISP MODE Sets up the LCD Lamp mode. 1 ~ (Dim) ~ 3 (Bright) OFF/AUTO1/AUTO 2/ON 60/120/240 Hz FIX: 3 AUTOHz

Enables/dis ables scanning access via the m icrophones [UP]/[DWN] keys. The choice of the equipment which connects to the MIC jack. Select the analog meter dis play configuration while the trans ceiver is receiving. Selects the analog meter display configuration while the trans ceiver is transm itting. Enabling/disabling of the peak hold function of the m eter. Setting of the blanking level for the IF Noise Blanker. Not available at this tim e. Program ming the [A] key (in the Operating Function Row q (MFq)) function. Program ming the [B] key (in the Operating Function Row q (MFq)) function. Program ming the [C] key (in the Operating Function Row q (MFq)) function. Program ming the optional MH-59A8J m icrophones [ACC] button assignm ent. Program ming the optional MH-59A8J m icrophones [P1] button as signment. Program ming the optional MH-59A8J m icrophones [P2] button as signment. Adjusts the audio input level from the TNC during 1200 bps Packet operation. Adjusts the audio input level from the TNC during 9600 bps Packet operation. Sets the transceivers circui try for the Packet baud rate to be used.

ON NOR SIG

ON 50 MONI

066 PG B

Q. SPL

067 PG C

068 PG ACC 069 PG P1

MONI Q. SPL

070 PG PPKT PKT 9600

TCALL 0 ~ ~ 50

073 PKT RATE

1200/9600 (bps)

1200 bps
074 PROC LEVEL 075 RF POWER SET
Sets the compression level for the AF speech proces sor in the SSB/AM m odes. Setting of the m axim um power level for the current band.

0 ~ ~ ~ 100 (UHF)

076 RPT SHIFT 077 SCAN MODE 078 SCAN RESUME 079 SPLIT TONE 080 SQL/RF GAIN 081 SSB MIC GAIN
Sets the magnitude of the repeater shift. Selects the desired Scan-Resume mode. Sets the delay tim e for scanning resumption. Enables/dis ables split CTCSS/DCS cording. Selects the configuration of the front panels SQL/RF knob. Adjusts the microphone gain level for the SSB mode. Selects the tuning steps for the SELECT knob on the SSB m ode. Setting of the CTCSS Tone Frequency.

0.00 ~ 99.99 (MHz) TIME/BUSY/STOP 1 ~ 10 (s ec) ON/OFF RF-GAIN/SQL 0 ~ 100

2 TIME 5 sec OFF 1 50

082 SSB STEP

1kHz/2.5kHz/5kHz

2.5kHz

083 TONE FREQ

50 Standard CTCSS tones

88.5 Hz

084 TOT TIME
Select the Tim e-Out Tim er tim e.

OFF/1 ~ 20 (min)

085 TUNER/ATAS
086 TX IF FILTER 087 VOX DELAY 088 VOX GAIN 089 XVTR A FREQ 090 XVTR B FREQ 091 XVTR SEL
Selects the device (FC-30 or ATAS-100/120) to be controlled via the front panels [A](TUNE) key. Selects the Trans m it IF filter. Sets the hang tim e for the VOX circuitry. Sets the gain of the VOX circuitrys input audio detector. Allows an arbitrary frequency to be set on the dis play, to allow direct frequency readout during transverter operation. Enables/dis ables/selects the antenna port to be used for Transverter operation.
OFF/ATAS(HF)/AT AS(HF&50)/ATAS( ALL)/TUNER CFIL/FIL1/FIL~ 3000 (ms) 1 ~ 100 0,000,00 ~ 9999,999,00 (kHz)

CFIL 500 m s 50

045 DSP BPF WIDTH Setting of the bandwidth for the DSP CW audio filter.

OFF/X VTR A/X VTR B

Function Available Values Enables/Dis ables the extended Menu ON/OFF Mode. ON/OFF Activates/deactivates the Automatic Repeater Shift feature when operating on the 144 MHz band. Activates/deactivates the Automatic ON/OFF Repeater Shift feature when operating on the 430 MHz band. Enab ling /disabl ing t he DIAL knob on t he A M ENABLE/DISABLE

Default OFF 1

DISABLE OFF RANGE OFF YAESU OFF
Sel ects the t un ing st ep s for t he SELECT knob on the AM m ode.
Selects the Auto Power Off time (tim e before power goes off). Selects the ARTS beep mode.
Setting of the degree of DSP Noise Reduction. Enables Tx/Rx operation on the Alaska 050 EMERGENCY Em ergency Channel, 5167.5 kHz. 051 FM MIC GAIN Adjusts the m icrophone gain level for the FM mode. 052 FM STEP Selects the tuning steps for the SELECT knob in the FM mode. Enables/dis ables the moving of HOME 053 HOME-->VFO channel data to the VFO. 054 LOCK MODE Selects the operation of the front panels LOCK key. Enables/dis ables the mem ory grouping 055 MEM GROUP feature. 056 MEM TAG Stores Alpha-Numeric Tags for the m emory channels. 057 MEM/VFO DIAL MODE Selects the function which is engaged when you press the SELECT knob.
8 OFF ON DIAL OFF MHz/MEM GRP
017 CAR USB R 018 CAR USB T 019 CAT RATE
Sets the transceivers circuitry for the 4800 bps/9600 4800bps CAT baud rate to be used. bps/38400 bps 020 CAT/LIN/TUN CAT Selects the device which is connected CAT/LINEAR/TUN to the CAT/LINEAR jack on the rear ER panel. 021 CLAR DIAL SEL Defines the control knob to be used SEL, MAIN SEL for setting of the clarifier offset frequency. 022 CW AUTO MODE Selects whether the KEY jack shall be ON/OFF OFF Enabled or Disabled while us ing the SSB/FM modes. Sets the CW carrier oscillator injection USB/LSB/AUTO 023 CW BFO USB side on the CW mode. 024 CW DELAY Sets the receiver recovery tim e during FULL/30 ~ m sec pseudo0VOX CW sem i-break-in m sec operation. 025 CW KEY REV NORMAL Sets the keyer paddles wiring NORMAL/REVERS configuration. E Enables/dis ables CW keying by the 026 CW PADDLE ELEKEY/MICKEY ELEKEY microphones [UP]/[DWN] keys. 027 CW PITCH 400 ~ 800 Hz 700 Hz Setting of the pitch of the CW sidetone, BFO offset, and CW filter center frequencies. Selects the tim e delay between when 028 CW QSK 10/15/20/25/ms the PTT is keyed and the carrier is ms transmitted during QSK operation when using the internal keyer. 029 CW SIDE TONE Setting of the CW sidetone volum e 0 ~ level. 4 ~ 60 wpm 030 CW SPEED Sets the sending speed for the built-in 12 wpm (60 cpm ) (1wpm /step)/20 ~ Electronic keyer. 300 cpm (5cpm/step) 031 CW TRAINING N, A, AN N Sends random Morse Code fivecharacter groups via the sidetone. 032 CW WEIGHT Sets the Dot:Dash ratio for the built-in 1:2.5 ~ 1:4.5 01:03.00 electronic keyer. 033 DCS CODE Setting of the DCS code. 104 Standard 23 DCS codes 034 DCS INV Tn-Rn Selects Norm al or Inverted DCS Tn-Rn/Tn-Riv/Tivcoding. Rn/Tiv-Riv Setting of the DIAL knobs tuning 035 DIAL STEP FINE/COARSE FINE speed. 036 DIG DISP 0 Hz Defines the dis played frequency offset 3000 ~ +3000 Hz during DIG (USER-L or USER-U) mode operation. Adjusts the audio input level from 037 DIG GAIN 0 ~ terminal equipment during DIG (Digital) m ode operation. 038 DIG MODE Selects the mode and sideband in the RTTY-L/RTTYRTTY-L DIG (Digital) m ode. U/PSK31-L/RTTYL/PSK31-U/USERL/USER-U 039 DIG SHIFT Defines the carrier frequency offset during DIG (USER-L or USER-U) mode operation. Sets the gain of the VOX circuitrys input level for the DIG m ode. 3000 ~ +3000 Hz 0 Hz

Enables/dis ables scanning access via the m icrophones [UP]/[DWN] keys. The choice of the equipment which connects to the MIC jack. Select the analog meter dis play configuration while the transceiver is receiving. Selects the analog meter dis play configuration while the transceiver is transm itting. Enabling/disabling of the peak hold function of the m eter. Setting of the blanking level for the IF Noise Blanker. Not available at this tim e. Program ming the [A] key (in the Operating Function Row q (MFq)) function. Program ming the [B] key (in the Operating Function Row q (MFq)) function. Program ming the [C] key (in the Operating Function Row q (MFq)) function. Program ming the optional MH-59A8J m icrophones [ACC] button assignm ent. Program ming the optional MH-59A8J m icrophones [P1] button as signment. Program ming the optional MH-59A8J m icrophones [P2] button assignment. Adjusts the audio input level from the TNC during 1200 bps Packet operation. Adjusts the audio input level from the TNC during 9600 bps Packet operation. Sets the transceivers circuitry for the Packet baud rate to be used.
Sets the compression level for the AF speech processor in the SSB/AM m odes. Setting of the m axim um power level for the current band.

040 DIG VOX

0 ~ 100

041 DISP COLOR

Selects the illumination color for each operating status. 042 DISP CONTRAST Setting of the dis play contrast level. 043 DISP INTENSITY Setting of the dis play brightness level. 044 DISP MODE Sets up the LCD Lamp mode.
1 ~ (Dim ) ~ 3 (Bright) OFF/AUTO1/AUTO 2/ON 60/120/240 Hz

FIX: 3 AUTOHz

Selects the device (FC-30 or ATAS-100/120) to be controlled via the front panels [A](TUNE) key. Selects the Transm it IF filter. Sets the hang tim e for the VOX circuitry. Sets the gain of the VOX circuitrys input audio detector. Allows an arbitrary frequency to be set on the dis play, to allow direct frequency readout during transverter operation. Enables/dis ables/selects the antenna port to be used for Transverter operation.