NS-P400

Natural Sound Speaker Package System Jeu denceintes Son Naturel Natural-Sound-Lautsprechersystem Natural Sound hgtalarpaket Sistema completo di altoparlanti a suono naturale Paquete del sistema de altavoces con sonido natural Natural Sound Luidsprekerpakket Systeem

Active Servo Technology

OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHRTEILE MEDFLJANDE TILLBEHR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES

q q q q q q q

After unpacking, check that the following parts are contained. Aprs le dballage, vrifier que les pices suivantes sont incluses. Nach dem Auspacken berprfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att fljande delar finns med. Verificare che tutte le parti seguenti siano contenute nellimballaggio dellapparecchio. Desembale el aparato y verificar que los siguientes accesorios estn en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
Speaker cords Cbles denceintes Lautsprecheranschlukabel Hgtalarledningar Cavi per gli altoparlanti Cables de los altavoces Luidsprekerdraden
Rubber Pads (for SW-P40) Tampons en caoutchouc (pour SW-P40) Gummiunterlagen (fr SW-P40) Gummidynor (fr SW-P40) Piedini di gomma (per lSW-P40) Forros de caucho (para SW-P40) Anti-slip rubbers (voor SW-P40)
Velcro strips (for NS-C40) Bandes velcro (pour NS-C40) Velcro-Streifen (fr NS-C40) Kardborreremsor (fr NS-C40) Strisce autoadesive (per lNS-C40) Cintas Velcro (para NS-C40) Velcro strips (voor NS-C40)
Thank you for selecting this YAMAHA NS-P400 Speaker Package system.

English

PROFILE OF THIS SYSTEM
NS-P400 is the package number which includes the YAMAHA speaker system NS-M40, NS-C40, NS-E40 and SW-P40. This speaker package system is designed for use in a multi-channel audio system, for example a home theater system, so includes a pair of main speakers (NS-M40), a center speaker (NS-C40), a pair of effect speakers (NS-E40) and a subwoofer system (SWP40).
<Main speakers (NS-M40)>
2-Way Acoustic-Suspension Speaker System
<Subwoofer (SW-P40)>
Active Servo Processing Subwoofer System with a built-in power amplifier
<Center speaker (NS-C40)>
Full range Acoustic-Suspension Speaker System
<Effect speakers (NS-E40)>
This subwoofer system employs YAMAHA Active Servo Technology which YAMAHA developed for reproducing higher quality super-bass sound. (Refer to page 15 for details on Active Servo Technology.) This unit can be added easily to your existing audio system by connecting to either the speaker terminals or the line output (pin jack) terminals of the amplifier. The high frequency cut off point (HIGH CUT) control enables you to adjust the tone balance between the subwoofer and the main speakers. A newly employed AUTO POWER ON/OFF switch saves you the trouble of pressing the POWER switch when turning this unit on or in the standby mode.

CONTENTS

Supplied accessories..2 Profile of This System..3 Caution..4 Setting up the speakers..5 Connections..8 Using the subwoofer (SW-P40)..12 Controls and their functions.12 Adjustment before using the subwoofer..13 Active Servo Technology..15 Troubleshooting (for SW-P40).16 Specifications..17
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the speakers to rain or water. To prevent the enclosure from warping or discoloring, do not place the speakers where it will be exposed to direct sunlight or excessive humidity. Do not place the speakers where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance. Placing the speakers on the same shelf or rack as the turntable can result in feedback. Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into clipping. Otherwise the speakers may be damaged. When using an amplifier with a rated output power higher than the nominal input power of the speakers, care should be taken never to exceed the speakers maximum input. As these speakers contain strong magnets (though NSM40, NS-C40 and SW-P40 are magnetically shielded types), avoid placing watches, magnetic tapes, etc. near them. Also, placing the speakers near a TV set may impair picture color. If this happens, move the the speakers away from TV set. Do not attempt to clean the speakers with chemical solvents; this might damage the finish. Use a clean, dry cloth. Secure placement or installation is the owners responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of the speakers.

<For SW-P40 only>

Never open the cabinet. If something drops into the set, contact your dealer. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wire itself. Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty. When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. To prevent lightning damage, disconnect the AC power plug when there is an electrical storm. Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Therefore, place the unit apart from the walls, allowing a space of at least 20 cm (7-7/8) above, behind and on the both sides of the unit. Also, do not position with the rear panel facing down on the floor or other surface. Super-bass frequencies reproduced by this unit may cause a turntable to generate a howling sound. In such a case, move this unit away from the turntable. If you hear distortion (i.e., unnatural, intermittent rapping or hammering sounds) coming from this unit, reduce the volume level. Extremely loud playing of a movie soundtracks low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system. This unit has a port called air woofer which is for reproducing a super-bass sound. Be careful not to put a hand or some objects into the port, otherwise it may give you an electric shock or give this unit a damage, or cause a fire. Voltage Selector (General Model only) The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are AC 110/120/220/240V, 50/60 Hz. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. In this state, this unit is designed to consume a very small quantity of power.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

SETTING UP THE SPEAKERS

Before you make connections, place all speakers in their proper positions respectively. The positioning of speakers are important, because it controls the whole sound quality of this system. Position the speakers on the basis of your listening position by following instructions on this section.

Speaker configuration

This system employs a 6 speaker configuration: 2 main speakers, 2 effect speakers, a center speaker and a subwoofer. The main speakers are used for the main source sound plus the effect sounds. The effect speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.). The subwoofer is for reinforcing low frequencies on your audio system.

Main L

Center

Main R

Subwoofer

Effect L

Effect R

Placing speakers

Main speakers:
On both sides of the TV and in almost the same height as the TV.
Effect speakers: Behind your listening position, facing
slightly inward. Nearly 1.8 m (approx. 6 feet) up from the floor.
Center speaker: Precisely between the main speakers. Subwoofer:
The position of the subwoofer is not so critical because low bass tones are not highly directional.
Main R Center Main L TV set Effect R Subwoofer
s Placing the subwoofer A B

: subwoofer,

: main speaker) Use the rubber pads Put the provided rubber pads at the four corners on the bottom of the subwoofer to prevent the subwoofer moving due to vibrations etc.
It is recommended to place the subwoofer on the outside of either the right or the left main speaker. (See fig. A.) The placement shown in fig. B is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel. To prevent this, face the subwoofer system obliquely to the wall as shown in fig. A. Note There may be a case that you cannot obtain enough superbass sounds from this unit when listening at the middle of the room. This is because standing waves have developed between two parallel walls and the bass sounds are being canceled. In such a case, face the subwoofer obliquely to the wall. It also may be necessary to break up the parallel surfaces by placing bookshelves etc. along the walls.
s Mounting the effect speakers
Mount the effect speakers on a shelf, rack or on the floor directly, or hang them on the wall. WARNING: Each speaker weighs 1.6 kg (3 lbs. 8 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long-term use and vibrations may cause them to fall down. To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall.
To mount the effect speakers on a wall
The speakers can be mounted on a wall by using the holes provided on the speakers rear panels. Fasten screws into a firm wall or wall support as shown in the diagram, and hang the holes on the rear of the speaker on the protruding screws. * Make sure that the screws are caught by a narrow part of the holes securely.
Diam. 4 5mm 40mm Min. 12mm Holes Wall/ wall support 2mm Tapping screw (Available at the hardware store)

s Mounting the center speaker
Place the center speaker on top of the TV or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided velcro strips at two points on both bottom of the speaker and top of the TV. Notes Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker. If placed, the speaker may drop out causing an injury to you. Though this speaker is a magnetically shielded type, there may be some influence on a TV picture depending on the type of TV or the placement of the speaker. In such a case, place the speaker apart from the TV so that there is no influence on TV picture.

Velcro strip

Screen

TV set

CONNECTIONS
Never plug in the subwoofer and other audio/video components until all connections are completed.
Connect the speakers to the speaker output terminals of your amplifier with the provided speaker cords. Connect the speakers making sure not to reverse the polarity (+, ). Connect the (+) terminals on both the amplifier and the speakers using one side of the cord. Connect the () terminals on both components using the other side of the cord. If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. For the main and effect speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals. The subwoofer can be connected to either the speaker output terminals or the line output (pin jack) terminals of the amplifier. Choose one of the ways shown in this section which is suitable for your audio system. Also, refer to the owners manual for each component to be connected to this unit.
Effect speaker Right Center speaker

Effect speaker Left

Amplifier

REAR SINGLE

CENTER
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

SPEAKERS

OUTPUT TO SPEAKERS
OUTPUT TO SPEAKERS INPUT2 AUTO POWER

Right Main speakers

ON OFF

FROM AMPLIFIER INPUT1

To AC outlet Note This diagram shows an example of connecting speakers to an amplifier which has two sets of main speaker output terminals. If you select this connecting way, make the amplifier output signals from both sets of main speaker output terminals. This system can also be connected to the amplifier in other ways depending on the type of amplifier. Refer to pages 10 to 11 for details.
How to connect speaker cords to the input terminals of the speakers (except the subwoofer)

How to Connect:

No good
Red: positive (+) Black: negative ()

Press the tab on the terminal down, as shown in the figure. Insert the bare wire end properly into the terminal hole. [Remove approx. 10 mm (3/8) insulation from the speaker cord.] Remove your finger from the tab to allow it to lock snugly on the cords wire end. Test the security of the connection by tugging lightly on the cord at the terminal.
Note Do not let the bare speaker wires touch each other as this could damage the speaker and/or the amplifier.
How to connect speaker cords to the subwoofers OUTPUT/INPUT1 terminals
For connections, cut the speaker wires as short as possible. If the connections are faulty, no sound will be heard from the speakers. * Banana Plug connections are also possible (except for Europe model). Simply insert the Banana Plug connector into the corresponding terminal.
How to Connect: Red: positive (+) Black: negative ()
Unscrew the knob. Insert the bare wire.
[Remove approx. 10 mm (3/8) insulation from the speaker cord.] Tighten the knob and secure the wire.
If your amplifier has only one set of main speaker output terminals
Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers.

Main speaker Right

Main speaker Left

INPUT2

AUTO POWER

To AC outlet

To connect the subwoofer to line output (pin jack) terminals of the amplifier
Connect the main speakers to the speaker output terminals of the amplifier. Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT. * For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select the method of connecting to the speaker output terminals. To connect with a YAMAHA DSP amplifier (or AV receiver), connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSP amplifier (or AV receiver) to either the left (L) or right (R) INPUT2 terminal of the subwoofer. To connect the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, connect them to both of the left (L) and right (R) INPUT2 terminals of the subwoofer.

Main speaker

Left Pin plug cords To AC outlet

LOW PASS (SUBWOOFER)

PRE OUT (SPLIT, SUBWOOFER)
Notes When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound.

When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT2 terminal.
USING THE SUBWOOFER (SW-P40)
CONTROLS AND THEIR FUNCTIONS

Rear panel Side panel

VOLUME

0 I0 HIGH CUT

50Hz I50Hz
1 OUTPUT (TO SPEAKERS) terminals
Can be used for connections with the main speakers. These terminals send signals output from the amplifier to the main speakers directly.

8 HIGH CUT control

Adjusts the high frequency cut off point. Frequencies higher than the frequency selected by this control are all cut off (and not output). * One graduation of this control represents 10 Hz.

50Hz 140 I50Hz

2 INPUT1 (FROM AMPLIFIER) terminals
Used to connect this unit with the speaker terminals of the amplifier.

3 INPUT2 terminals

Used to input line level signals from the amplifier.
4 AUTO POWER ON/OFF switch
By setting this switch to the ON position, this units automatic power ON/OFF function operates as described below. If you do not need this function, set to the OFF position. * Make sure to change the setting of this switch only when this unit is in the standby mode. Automatic power ON/OFF function When you play a source, the power to this unit turns on automatically by sensing audio signals input to this unit. This unit turns into the standby mode automatically if the source being played is stopped or the input signal is cut off for several minutes. This function will operate responding to a certain level of low frequency input signal. Increase the output level on the input source if the automatic power ON function will not operate, or decrease the level if the automatic power OFF function will not operate. * There may be a case that the power turns on unexpectedly by sensing noise from other appliances. If it occurs, set the AUTO POWER ON/OFF switch to the OFF position. * The level of low frequency input signal differs with each source, and each different part on the same source. So, this function may not operate properly depending on some source. This function is available only when the power of this unit is on (by setting the POWER switch (6) to on).

5 POWER indicator

Lights in green when the POWER switch is turned on, and goes off when turned into the standby mode. * Standby mode If the AUTO POWER ON/OFF switch on the rear panel is set to ON, this indicator lights in red when no signal is input to this unit.

6 POWER switch

Turns the power to this unit on and turns this unit into the standby mode alternately whenever pressed. When this switch is turned on, the POWER indicator over the POWER switch lights up.

7 VOLUME control

Adjusts the volume level.
ADJUSTMENT BEFORE USING THE SUBWOOFER
Before using the subwoofer, make an adjustment on the subwoofer to obtain the optimum volume and tone balance between the subwoofer and the main speakers by following the procedures shown below.

Side panel

Set the VOLUME control to minimum. Turn on the power supply to all the components. Play any source and adjust the amplifiers volume control to the desired listening level. Turn up the VOLUME control gradually to adjust the volume balance between this unit and the main speakers. If you prefer, set the HIGH CUT control to the position where you can obtain the optimum tone balance between the subwoofer and the main speakers.
Notes Once the volume balance between the subwoofer and the main speakers is adjusted, you can adjust the volume of your whole sound system by using only the amplifiers volume control. However, if you change the main speakers NS-M40 to others, you must make this adjustment again. For adjusting the VOLUME control and the HIGH CUT control, refer to FREQUENCY CHARACTERISTICS on the next page.
Note about setting the HIGH CUT control
This system is designed so that the optimum tone balance between the subwoofer and the main speakers is obtained when this control is set at the point of 80 Hz. However, the tone balance may change depending on the room size, the distance from the subwoofer to the main speakers, and so on. So, if you prefer, turn the HIGH CUT control to set it to a position where a better tone balance is obtained.
s FREQUENCY CHARACTERISTICS
Adjustment of the VOLUME control and the HIGH CUT control should be changed depending on the room size, the distance from the subwoofer to the main speakers, sources, etc. Following figures show the optimum adjustment of each control and the frequency characteristics when this subwoofer is combined with NS-M40.

Frequency characteristics of this subwoofer (SW-P40)

HIGH CUT 100 Hz

HIGH CUT 150 Hz

HIGH CUT 50 Hz

When combined with NS-M40

SW-P40 SW-2

NS-M40

ACTIVE SERVO TECHNOLOGY

The theory of Active Servo Technology is based upon two major factors, the Helmholtz resonator and negativeimpedance drive. Active Servo Processing speakers reproduce the bass frequencies through an air woofer, which is a port or opening in the speakers cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system. Thus, signals of low amplitude within the cabinet can, according to the Helmholtz resonance theory, be output from this opening as waves of great amplitude if the design is such that the size of the opening and the volume of the cabinet are in the correct proportion to satisfy a certain ratio. In order to accomplish this, moreover, the amplitudes within the cabinet must be both precise and of sufficient power because these amplitudes must overcome the load presented by the air that exists within the cabinet. Thus it is this problem that is resolved through the employment of a design in which the amplifier functions to supply special signals. If the electrical resistance of the voice coil could be reduced to zero, the movement of the speaker unit would become linear with respect to signal voltage, and, to accomplish this, a special negative-impedance output-drive amplifier for subtracting output impedance of the amplifier is used. By employing negative-impedance drive circuits, the amplifier is able to generate precise, low-amplitude low-frequency waves with superior damping characteristics, and these waves are then radiated from the cabinet opening as highamplitude signals. The system can, therefore, by employing the negative-impedance output drive amplifier and a speaker cabinet with the Helmholtz resonator, reproduce an extremely wide range of frequencies with amazing sound quality and less distortion. The features described above, then, are combined to be the fundamental structure of the Active Servo Technology.

Highamplitude bass sound

Cabinet Port Negative-impedance output drive
Air woofer (Helmholtz resonator)
Active Servo Processing Amplifier

Signals

Signals of low amplitude
REMOVING THE FRONT GRILLE (for NS-M40 and SW-P40 only)
The front grille is fastened to the enclosure at four points, and can be removed if desired. To remove the grille, first hold the bottom of the grille and unfasten the lower part of the grille by pulling it gently, and then hold both sides of the grille and slowly pull straight away from the speaker. To reattach, line up the four pegs on the inside surface of the grille with the four corresponding holes on the speaker and push gently. Note When the grille is removed, take care not to touch the speaker unit with your hands or to exert excessive force with tools.

TROUBLESHOOTING (for SW-P40)
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help.
SYMPTOM Power is not supplied even though the POWER switch is ON. No sound. CAUSE The power plug is not securely connected. The VOLUME control is set to 0. Speaker cables are not connected securely. Sound level is too low. Speaker cables are connected incorrectly. A source sound with few bass frequencies is played. It is influenced by standing waves. REMEDY Connect it securely. Turn the VOLUME control to right. Connect them securely. Connect them correctly, that is to say L (left) to L, R (right) to R, + to + and to. Play a source sound with bass frequencies. Set the HIGH CUT control to a higher position. (Turn the knob to right.) Re-position the subwoofer or break up the parallel surface by placing bookshelves etc. along the walls. Turn the POWER switch on. Increase the level of input signal on the source. Increase the level of input signal on the source. Move this unit farther away from such equipment and/or change the position of connected speaker cables. Otherwise, do not use the automatic power ON function of this unit.
Automatic power ON function will not work.
The POWER switch is turned off. The level of input signal is too low. The level of input signal is too low. An influence of noise generated from external digital equipment etc.
Automatic power OFF function will work unexpectedly. Automatic power ON function will work unexpectedly.

SPECIFICATIONS

<NS-M40, NS-C40, NS-E40>
Type <NS-M40>.2-Way Acoustic-Suspension Speaker System Magnetically-shielded type <NS-C40>..Full range Acoustic-Suspension Speaker System Magnetically-shielded type <NS-E40>..Full range Acoustic-Suspension Speaker System Speaker Unit <NS-M40>.14 cm (5-1/2) cone woofer 19 mm (3/4) semidome tweeter <NS-C40>..10 cm (3-15/16) cone speaker x 2 <NS-E40>.10 cm (3-15/16) cone speaker Nominal Input Power <NS-M40>..40W <NS-C40>..50W <NS-E40>...25W Maximum Input Power <NS-M40>...120W <NS-C40>...150W <NS-E40>...80W Impedance...6 ohms Frequency Response <NS-M40>..65 Hz20 kHz <NS-C40>..65 Hz20 kHz <NS-E40>..70 Hz20 kHz Sensitivity...90 dB/W m

<SW-P40>

Type..Active Servo Processing Subwoofer System Magnetically-shielded type Speaker Unit..20 cm (7-7/8) cone woofer Amplifier Output..50W/5 ohms High-Cut Filter.50 Hz150 Hz (24 dB/oct.) Impedance INPUT1...4.7 k-ohms INPUT2...10 k-ohms Frequency Response.30 Hz200 Hz (10 dB) Power Supply Europe model...AC 230V, 50 Hz Australia model..AC 240V, 50 Hz General model.AC 110/120/220/240V, 50/60 Hz Power Consumption...50W Dimensions (W x H x D).320 mm x 400 mm x 344 mm (12-5/8 x 15-3/4 x 13-9/16) Weight..12.2 kg (26 lbs. 13 oz.)

* Please note that all specifications are subject to change without notice.
Dimensions (W x H x D) <NS-M40>..171 mm x 281 mm x 188.5 mm (6-3/4 x 11-1/16 x 7-7/16) <NS-C40>..436 mm x 131 mm x 210.5 mm (17-3/16 x 5-3/16 x 8-5/16) <NS-E40>..171 mm x 281 mm x 112 mm (6-3/4 x 11-1/16 x 4-7/16) Weight <NS-M40>..2.5 kg (5 lbs. 8 oz.) x 2 <NS-C40>..3.2 kg (7 lbs. 1 oz.) <NS-E40>..1.6 kg (3 lbs. 8 oz.) x 2
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VSTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

VV18440

SAN ANTONIO EXPRESS-NEWS
THURSDAY, OCTOBER 19, 2006
Wrap up this winter South Texas style
Chunky hooded cardigan, Michael Kors, $129.50, Macys. Shawl-collared ribboned bolero, Oscar de la Renta, $1,800, Saks. Crocheted capelet, Burberry, $495, Saks.
W H O , W H AT , W H EN & W EA R
Carolina Herrera spring collection Her name is synonymous with luxury elegance and so, phistication. Get a preview of Carolina Herreras spring collection, which features gentle silhouettes and lightweight fabrics, during an informal modeling event from 11 a.m. to 3 p.m. today and Friday in the designer department on level two at Saks Fifth Avenue, North Star Mall. For more information, call (210) 839-5273. Majorica jewelry collection The internationally known Barcelona-based company creates organic manmade pearls in classic jewelry styles that are as elegant as they are versatile. Its a twoday showing of the Majorica collection at Julian Gold, 4109 McCullough Ave. For more information, call (210) 8242493.

Today-Friday

style. Peruse the entire line of Jon Hart personalized and made-to-order luggage and accessories in new styles and colors at Sparkles, 6350 N. New Braunfels Ave., in the Sunset Ridge shopping center. Call (210) 828-2004 for more information.
Belted long sweater, INC, $99, Macys
PHOTOS BY ROBERT MCLEROY/ STAFF
The product: Abrione Clean Slate Facial Cleanser, $46 for 16 ounces, $28 for 8 ounces. What it promises: A glowing, healthy complexion What tester said: Since college, Ive been faithful to the Japanese skin-care line DHC. But my recent trial of Abrione a collection of all-natural products developed by an organic chemist in Arizona is tempting me to go astray. This cleanser is like an invigorating spa facial in a bottle. Meant to revitalize the skin, it uses
and strawberry seeds, ingredients that the manufacturer says can improve circulation and energize tired skin. I cant verify either of those claims, but after using the product in the shower every day for about a week, my skin felt soft and smooth, head to toe. Tested products can be purchased from Abrione Natural Skin Care at www.vbcosmetics.com. For more shopping tips, go to MySanAntonio.com, Keyword: Blogs, and click on the Shopping Posse.
aloe vera to prevent inflammation and botanical acids to lift away dead, dull skin cells. After a weeks use, my skin looked and felt better than it has in years. And even though it smells and feels expensive, I was pleasantly surprised to find I could get an 8 oz. bottle for $28, well within my budget for a facial cleanser.
The product: Abrione Microdermabrasion Facial Scrub, $23 for 4 ounces, $32 for 8 ounces. and $58 for 16 ounces. What it promises: A moisturized, smoother complexion
What tester said: This stuff is absolutely amazing. I must admit, I was a little scared of it at first. There was just something about the word microdermabrasion that didnt sound very comfortable. But I was wrong. Made with aloe vera gel, sea kelp and chamomile extracts, this scrub gently exfoliates while moisturizing. Its less granulated than any other product Ive seen. It goes on smooth, washes off easily and leaves skin feeling baby soft. The product: Abrione Brown Sugar Strawberry Gel Scrub, $40 for 16 ounces. What it promises: Softer skin and increased blood flow to the skins surface What tester said: This scrub left my skin feeling smoother and softer than any other Ive ever tried. It contains brown sugar
Clack: Texas children. in need of help

CONTINUED FROM 1F

I know about Arnold Drummond, she said. What are you talking about, DaMonna? I grew up watching Diffrent Strokes and Webster, so I know how common it is for white Americans to adopt black children, she explained. DaMonna said this isnt her first attempt to adopt an American child. I was going to take in the Boys Choir of Harlem but Angelina and Brad beat me to it, she said. After picking up my baby from Texas, Id like to take a trip to Utah and see if there may be a new generation of Osmonds to adopt. DaMonna was asked why she was intent on adopting a

baby from Texas. Because Texas is a great state and home to my favorite sports team Go Spurs Go! she said. Also, after studying the statistics, I believe Texas children are most in need of my help. Asked to elaborate, she said, Texas leads the U.S. in uninsured children, and also ranks high in infant mortality 2, year-olds who arent immunized, children born to teenage mothers and seems to have a problem funding its public schools. It kind of reminds me of Malawi. Plus, I was moved by the commercials of Sally Struthers pleading for the world to help the children of Texas. Before boarding the plane for Texas, DaMonna also said she would build a dozen
schools to help educate the states children. In other trans-Atlantic and not-so-trans-Atlantic adoption news, Britney Spears announced her intentions to adopt Sen. Barack Obama.
Cary Clacks column appears on Sundays, Tuesdays and Thursdays. To leave him a message, call (210) 250-3546 or e-mail cclack@expressnews.net.
Ol Marketplace The Junior Oct. 27-Nov. 5 Leagues annual Grab your Partners Ol Marketplace Card starts today and Heres a prime continues through opportunity to not Sunday at the Cononly save money , vention Center, 200 but also save lives. E. Market St. The For a $50 donation event, which beneto the Cancer Cenfits community proter Council, youll jects and programs receive a Partners of the Junior Shopping Card, League of San Anwhich entitles you tonio, features to a 20 percent dismore than 100 count when you unique merchants shop or dine at any from across the of nearly 400 stores country. and restaurants Tickets cost $12 COURTESY CYNTHIA from Oct. 27 at the door. General STEFFE through Nov 5. shopping hours are This empire-waist All card sales noon to 5 p.m. todress is part of Cyn- will benefit the day 10 a.m. to 7 , thia Steffes fall col- Cancer Therapy & p.m. Friday-Saturlection. Meet the de- Research Center day and 11 a.m. to , signer Oct. 26 at Multidisciplinary 4 p.m. Sunday. Saks Fifth Avenue. Breast Cancer CenFor more inforter. mation, call (210) 979-5710. To purchase a Partners Shopping Card, call (210) 616Friday 5571 or visit the Web site You asked for it www.cancercentercouncil.net. Preview the return of the Jeanie Tavitas-Williams petite collections from 10 a.m. to 3 p.m. on level two at Saks Fifth Avenue, North Star Mall. Does your business or club have a fashion event coming A representative from the petup? Wed like to list it in ites department will be on Who, What, When & Wear E. hand to help with your selecmail jtavitas@expresstions. For more information, news.net, or fax your info to call (210) 839-5337. Jeanie Tavitas-Williams c/o Saturday Who, What, When & Wear , Jon Hart trunk show (210) 250-3405, two weeks beDo your holiday traveling in fore the event.

Today-Sunday

Eat, meet and greet Contemporary designer Cynthia Steffe will make a special appearance at Saks Fifth Avenue to celebrate the launch of the Cancer Center Councils Partners Shopping Card during a luncheon and fashion show from noon to 1 p.m. at Saks Fifth Avenue, North Star Mall. Your Partners Shopping Card is your admission, and reservations are required by Monday. Cant make the luncheon? Steffe will be in the store from 1 to 3 p.m. to meet and greet fans. For reservations and information, e-mail vmckinne@ctrc.net or call (210) 6165571.

Oct. 26

Children Who Play Music Score Higher On The SAT Test. Why Not Start Your Child Playing Music Today?
According to The College Entrance Examination Board*, students who continue their study of music through high school scored 57 points higher on the verbal portion and 40 points higher on the math portion than those students with no musical experience. *Source http://www.menc.org/information/advocate/sat.html. Let Alamo Music help you find the way. Call us today.
Pearl River Yamaha C40 Classical Guitar Package
Yamaha Clavinova Pianos Acoustic Pianos

Sale Price

Package includes: guitar case, book & CD
IbanezIJS40 Electric Guitar Package

Starting at

5000 per month*
Ibanez IJV50 Acoustic Guitar Package
Package includes: GRX40 Guitar, IBZ10 Amp, tuner, gig bag, strap, video, book, chord chart, picks

*With approved credit

per month*

9999 Package includes:

Complete Service Department Available

tuner, gig bag, strap

Serving You Since 1891 alamomusic.com
Life is More Fun When You Play Music
1530 Babcock 525-1010 800-237-5010
425 North Main Ave. 224-1010 800-822-5010
Lessons Available For All Instruments