DSP-A595a

Natural sound AV Amplifier Amplificateur audio-vido
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VSTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
Printed in Malaysia ID V403430

00DSP-A595a-cv1/4

6/28/99, 2:32 PM
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHRTEILE MEDFLJANDE TILLBEHR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES
After unpacking, check that the following parts are included. Aprs le dballage, vrifier que les pices suivantes sont incluses. Nach dem Auspacken berprfen, ob die folgenden Teile vorhanden sind. Kontrollera efter uppackningen att fljande delar finns med. Verificare che tutte le parti seguenti siano contenute nellimballaggio dellapparecchio. Desembalar el aparato y verificar que los siguientes accesorios estn en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
Batteries (size AA, R6, UM-3) Piles (taille AA, R6, UM-3) Batterien (Gre AA, R6, UM-3) Batterier (storlek AA, R6, UM-3) Batterie (formato AA, R6, UM-3) Pilas (tamao AA, R6, UM-3) Batterijen (maat AA, R6, UM-3)
Remote control Before using the remote control, install the supplied batteries. See page 40 for battery installation. Tlcommande Avant dutiliser la tlcommande, mettre les piles fournies en place. Pour la mise en place des piles, voir page 84. Fernbedienung Legen Sie vor Gebrauch der Fernbedienung die mitgelieferten Batterien ein. Angaben zum Einlegen der Batterien finden Sie auf Seite 128. Fjrrkontroll Stt i de medfljande batterierna innan du anvnder fjrrkontrollen. Se sidan 172 om hur man stter i dem. Telecomando Prima di usare il telecomando, installare le batterie in dotazione. Per linstallazione delle batterie vedere a pagina 216. Control remoto Antes de utilizar el transmisor de control remoto, instlele las pilas suministradas. Para instalar las pilas, consulte la pgina 260. Afstandsbediening Alvorens u de afstandsbediening gaat gebruiken, moet u de bijgeleverde batterijen plaatsen. Zie blz. 304 voor het plaatsen van de batterijen.
01DSP-A595a-6/24/99, 12:14 PM

English

FEATURES
5-Channel Power Amplification Minimum RMS Output (0.04% THD, 20 Hz 20 kHz) Main: 65 W + 65 W (8 ) Center: 65 W (8 ) Rear: 65 W + 65 W (8 ) Multi-mode Digital Sound Field Processing q q q q Digital Sound Field Processor (DSP) Dolby Digital Decoder Dolby Pro Logic Decoder DTS Decoder q Automatic Input Balance Control for Dolby Pro Logic decoding q Test Tone Generator for Easier Speaker Balance Adjustment q Speaker Output Mode Selection q 6-Channel External Decoder Input for Other Future Formats q Video Signal Input/Output Capability (Including S Video Connections) q SLEEP Timer q Universal Remote Control with Preset
q CINEMA DSP: Theater-like Sound Experience by the Combination of YAMAHA DSP Technology and Dolby Digital, Dolby Pro Logic or DTS

CONTENTS

SUPPLIED ACCESSORIES.. 2 FEATURES... 3 CAUTION... 4

q Information about DSP

SOUND FIELD PROGRAM... 28

q Introduction

FEATURES OF THE SOUND EFFECTS.. 5 CONTROLS AND THEIR FUNCTIONS.. 8

q Advanced Information

ADJUSTMENTS IN THE SET MENU MODE. 33

q Remote control

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.
10. Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty. 11. When not planning to use this unit for a long period of time (e.g., a vacation), disconnect the AC power plug from the wall outlet. 12. To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm. 13. Grounding or polarization Precautions should be taken so that the grounding or polarization of the unit is not defeated. 14. AC outlet Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.
FEATURES OF THE SOUND EFFECTS

Introduction

Welcome to the exciting world of digital home entertainment. This unit is one of the most complete and advanced AV amplifiers available. Some of the more advanced features may not be familiar to you, but they are easy to use. State-of-the-art technologies such as Dolby Digital and Digital Theater Systems (DTS) may be new to your home, but you have probably experienced the amazing realism they bring to feature films in theaters around the world. To make the listening experience even more enjoyable, this unit includes a number of exclusive, digitally created listening environments known as digital sound fields. Choosing a sound field program is like transporting yourself to such venues as an outdoor arena, a European church, or a cozy jazz club. Take some time now to read more about these features and enjoy the new experiences this unit brings to your home theater.
Digital Sound Field Processing
What is it that makes live music so good? Todays advanced sound reproduction technology lets you get extremely close to the sound of a live performance, but the chances are that youll still notice something missing the acoustic environment of the live concert hall. Extensive research into the exact nature of the sonic reflections that create the ambience of a large hall has made it possible for YAMAHA engineers to bring you this same sound to your listening room, so youll feel all the sound of a live concert. Furthermore, our technicians, armed with sophisticated measuring equipment, have even made it possible to capture the acoustics of a variety of actual concert halls, theaters, etc. from around the world, to allow you to accurately re-create any one of these live performance environments, all in your own home.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

DTS Digital Surround

DTS (Digital Theater Systems) was developed to replace analog soundtracks of movies with six discrete channels of digital soundtracks, and it is now installed in many theaters around the world. The DTS digital playback system changed the way we experienced movies in theaters with six discrete channels of superb digital audio. DTS technology, through intense research and development has made it possible to deliver similar encode/decode discrete technology to home audio surround-sound entertainment. DTS Digital Surround is an encode/decode system which delivers six channels of master-quality, 20-bit audio; technically, it is 5.1 channels, which means 5 full-range (left, center, right and two surround) channels, plus a subwoofer (LFE) channel (as 0.1). It is compatible with the 5.1 speaker configurations that are currently available for home theater systems. The DTS Digital Surround algorithm is designed to encode the six channels of 20-bit audio on to some laser discs, compact discs and DVDs with considerably less data compression. By using the DTS decoder built into this unit, you can experience the dramatic realism and impact of the DTSinstalled theaters high quality sound in your home. Laser disc, compact disc and DVD are home audio formats by which DTS can present its high-quality multi-channel audio. (In addition to movies on laser discs, many exciting new multichannel music recordings will also become available in the form of DTS-encoded compact discs.)
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. DTS, DTS Digital Surround, are trademarks of Digital Theater Systems, Inc. Copyright 1996 Digital Theater Systems, Inc. All Rights Reserved.
CINEMA DSP: Dolby Surround + DSP / DTS + DSP
The Dolby Surround sound and DTS systems show their full ability in a large movie theater, because movie sounds are originally designed to be reproduced in a large movie theater that uses a multitude of speakers. Trying to create a sound environment similar to that of a movie theater in your home is difficult because of the room size, material inside the walls, the number of speakers, and so on. In other words, your listening room is very different from a movie theater. However, YAMAHA DSP technology allows you to create nearly the same sound experience as that of a large movie theater in your home by compensating for the lack of presence and dynamics in the listening room with original digital sound fields combined with Dolby Surround or DTS Digital Surround sounds.

CINEMA DSP

The YAMAHA CINEMA DSP logo indicates those programs that are created by the combination of YAMAHA DSP technology and Dolby Surround or DTS.

Dolby Pro Logic + 2 Digital Sound Fields
Digital sound fields are created on the presence side and the rear surround side of the Dolby Pro Logic-decoded sound field, respectively. They create a wide acoustic environment and emphasize the surround effect in the room, letting you feel as much presence as if you were watching a movie in a popular Dolby Stereo theater. Refer to pages 28 to 29 for the DSP program.
Dolby Digital or DTS + 3 Digital Sound Fields
Digital sound fields are created on the presence side and the independent left and right surround sides of the Dolby Digitaldecoded or DTS-decoded sound field, respectively. They create a wide acoustic environment and strong surround effect in the room without losing high-channel separation. With the wide dynamic range of Dolby Digital or DTS sound, this sound field combination lets you feel as if you were watching a movie in the newest Dolby Digital theater or DTS-installed theater. This is the most ideal home theater sound at the present time. Refer to pages 28 to 29 for the DSP program.
CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

Refer to pages 35 to 40 for the remote control.

1 STANDBY/ON

Press this switch to turn on the power of this unit. Press it again to set this unit in the standby mode. Standby mode In this state, this unit consumes a very small quantity of power to receive infrared-signals from the remote control.

5 INPUT

Turn this selector to select the input source (VCR, VIDEO AUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) that you want to listen to or watch. The name of the selected input source appears on the display.

6 VOLUME

This control is used to raise or lower the volume level.

2 Remote control sensor

This receives signals from the remote control.

7 PHONES jack

When you use headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones. When using headphones only, set both SPEAKERS A and B to the OFF position and switch off the digital sound field processor (so that no DSP program name appears on the display) by pressing EFFECT.

3 Display

This shows various information. (Refer to page 10 for details.)
4 TAPE/MD MON / EXT. DECODER
Press this button to play a tape or an MD. The TAPE/MD MON indicator lights up on the display. When you press the button next, the TAPE/MD MON indicator goes off, EXT. DECDR appears on the display and you can play the signal connected to the EXTERNAL DECODER INPUT terminals.

CONNECTING TO S VIDEO TERMINALS
If you have a VCR and a monitor equipped with S (highresolution) video terminals, those terminals can be connected to this units S VIDEO terminals. Connect the VCRs S video input and output terminals to this units S VIDEO VCR OUT and IN terminals, respectively, and connect the monitors S video input terminal to this units S VIDEO MONITOR OUT terminal. Otherwise, connect the VCRs composite video terminals to this units composite video terminals, and connect the monitors composite video input terminal to this units composite MONITOR OUT terminal. In addition, if you have a DVD or LD player equipped with an S video terminal, connect the DVD/LD players S video output terminal to this units S VIDEO DVD/LD terminal. Note If video signals are sent to both S VIDEO input and composite input terminals, the signals will be sent to their respective output terminals. VCR

DVD/LD player

S VIDEO terminals This unit provides you with S VIDEO terminals in addition to standard VIDEO terminals. S VIDEO terminals transmit video signals separated into luminance (Y) signals and color (C) signals. In comparison with S VIDEO terminals, standard VIDEO terminals transmit composite video signals.

S VIDEO cable

CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL)
These terminals are used to connect any video input source such as a camcorder to this unit.
CONNECTING WITH A MONITOR TV THAT USES A 21-PIN CONNECTOR FOR INPUT
Make a connection as shown below with a commercially available SCART-plug connector cable.

No connection

Monitor TV SCART-plug connector cable Camcorder
CONNECTING TO AN EXTERNAL DECODER
This unit is equipped with additional 6-channel audio signal input terminals for inputting signals from an external decoder to this unit. Connect the 6-channel audio signal output terminals of the decoder to the EXTERNAL DECODER INPUT terminals of this unit. Notes When signals input to these terminals are selected, the digital sound field processor cannot be used. The settings of CNTR, REAR, MAIN and BASS in the SET MENU mode have no effect on the signals input to these terminals. The setting of M.LVL is effective. (Refer to page 18 for details.) Adjustment of the output level of the center speakers, rear speakers and subwoofer is effective when the signals input to these terminals are selected as the input source. (Refer to page 31 for details.)

REAR (REAR SPEAKERS)

Choices: LARGE/SMALL Preset position: LARGE LARGE: Select this position if your rear speakers have high ability for bass reproduction, or if a subwoofer is connected in parallel to the rear speaker. In this position, full-range signals are output from the rear speakers. SMALL: Select this position if your rear speakers do not have high ability for bass reproduction. In this position, low bass signals (below 90 Hz) on the rear channels are output from the SUBWOOFER OUTPUT terminal (or the main speakers if the MAIN position is selected for BASS).

M.LVL (MAIN LEVEL)

Choices: NRML (NORMAL)/10 dB Preset position: NRML (NORMAL) NRML (NORMAL): Normally select this position. 10 dB: Select this position if the sound output from the main speakers is too loud and cannot be balanced with the sound output from the center and rear speakers. In this position, the sound output from the main speakers is attenuated. Note The settings of CNTR, REAR, MAIN and BASS have no effect on the signals input to the EXTERNAL DECODER INPUT terminals on the rear of this unit.

MAIN (MAIN SPEAKERS)

Choices: LARGE/SMALL Preset position: LARGE LARGE: Select this position if your main speakers have high ability for bass reproduction. In this position, full-range signals present on the main channels are output from the main speakers. SMALL: Select this position if your main speakers do not have high ability for bass reproduction. However, if your system does not include a subwoofer, do not select this position. In this position, low bass signals (below 90 Hz) on the main channels are output from the SUBWOOFER OUTPUT terminal if the SW or BOTH position is selected for BASS.

ADJUSTMENT METHOD

Adjustments should be made while watching the information on this units display.
When adjusting with the remote control, set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control.
Press + or once or more to select the setting you want.
Front panel Remote control

Turn the power on.

Front panel Remote control or
Press SET MENU once or more to select the function CNTR on the display.
Repeat steps 2 and 3 to change the settings for REAR, MAIN, BASS and/or M.LVL in the same way.
* After pressing SET MENU once on the remote control, you can also select the function by pressing. (Pressing goes back one selection.)
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the main, center and rear speakers by using the built-in test tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor, the Dolby Digital decoder, the Dolby Pro Logic decoder and the DTS decoder. The adjustment of each speaker output level should be done at your listening position with the remote control. After completing the adjustment of the output level for each speaker, use VOLUME ( ) on the remote control at your listening position to check if the adjustments are satisfactory.

Set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control.
Set VOLUME to the position.

Front panel

Select the main speakers to be used.
* If you use two main speaker systems, press both A and B.
Set BASS, TREBLE and BALANCE to the 0 position.

Turn up the volume.

Remote control
Press TEST so that TEST LEFT appears on the display.
You will hear a test tone (like pink noise) from each speaker for about two seconds in following order: left main speaker, center speaker, right main speaker, right rear speaker and left rear speaker. The display changes as shown below.

Main (L)

Center

Main (R)

Rear (R)

Rear (L)

* If the function CNTR in the SET MENU mode is set to the NONE position, you will hear the center channel test tone from the left and right main speakers.
Adjust BALANCE so that the sound output level of the left main speaker and the right main speaker is the same.
Adjust the sound output levels of the center speaker and the rear speakers so that they become almost the same as that of the main speakers. Press TIME/LEVEL once or more to select the speaker to be adjusted so that CENTER, R SUR. or L SUR. appears on the display.
Notes Once you have completed these adjustments, you can only adjust the overall sound level of your audio system by using VOLUME (or VOLUME ( ) on the remote control). If you use external power amplifiers, you may also use their volume controls to achieve the proper balance. If the function CNTR in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted in step 8. The center sound is automatically output from the left and right main speakers. If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting M.LVL to 10 dB.
* You cannot adjust the delay time while the test tone is sounding even if DELAY appears on the display after pressing TIME/LEVEL once or more. Adjust the level. * Pressing raises and lowers the level. * While adjusting, the test tone is heard from the selected speaker.
When the adjustment is finished, press TEST again to stop the test tone.

BASIC OPERATION

TO PLAY A SOURCE
When using the remote control Set the SELECTOR DIAL to the AMP/TUN position on the remote control. To operate the tuner, the CD player, DVD/LD player, tape deck, MD recorder, or other components with this remote control, set the SELECTOR DIAL to the component to be used. (See SETUP CODES on page 41.)
Select the desired input source by using INPUT. (Turn on the monitor TV for video sources.)
The name of the selected input source will appear on the display.
To play a tape or an MD Press TAPE/MD MON / EXT. DECODER on the front panel or TAPE/MD on the remote control so that the TAPE/MD MON indicator lights up on the display.

Control range (ms) 15 to to to to to to to to to to to to to to 99

Preset value 16 44

4. 5. 6. 7. 8.
Adjusting the output level of the center, right rear and left rear speakers, and subwoofer
If desired, you can adjust the sound output level of each speaker even if the output level has already been set in SPEAKER BALANCE ADJUSTMENT on pages 20 to 22. Notes The output level of the center speaker cannot be adjusted when the DISCO, ROCK CONCERT or CONCERT HALL program is selected, and the input signal is analog, PCM audio, or encoded with Dolby Digital in 2-channel. If the function CNTR in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted. This is because, in this mode, the center speaker sound is automatically output from the left and right main speakers. Once the output level has been adjusted, the level will be the same for all digital sound field programs.
Speaker CENTER RIGHT REAR LEFT REAR SUBWOOFER
Control range (dB) MIN, 20 to +10 MIN, 20 to +10 MIN, 20 to +10 MIN, 20 to 0

Preset value 0 0

Memory back-up The memory back-up circuit prevents the stored data from being lost when this unit is set in the standby mode. If, however, the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure for more than one week, the latest values for the delay time and the center/rear/subwoofer output levels that were set will automatically return to the preset values. If so, they can be re-set by simply following the adjustment method on page 31.
ADJUSTMENTS IN THE SET MENU MODE
The following ten types of functions will maximize the performance of your system and expand your enjoyment for audio listening and video watching.

1. 2. 3. 4. 5. 6.

CNTR (CENTER SPEAKER) REAR (REAR SPEAKERS) MAIN (MAIN SPEAKERS) BASS (LFE/BASS OUT) M.LVL (MAIN LEVEL) D.D.LFE (DOLBY DIGITAL LFE LEVEL)

7. 8. 9. 10. 11.

D.RNG (DYNAMIC RANGE) DTS LFE (DTS LFE LEVEL) C.DELAY (CENTER DELAY) GUARD (MEMORY GUARD) INPUT (INPUT MODE)
For details on CNTR, REAR, MAIN, BASS and M.LVL, see page 18. (Once you have selected the appropriate settings, you do not have to change any settings unless an alteration is made in your speaker system.)
D.D.LFE (Adjusting the level of the LFE channel for Dolby Digital)
Control range: 20 dB to 0 dB (in 1 dB steps) Preset value: 0 dB * This adjustment is effective only when Dolby Digital is being decoded and the signals of the selected source encoded with Dolby Digital contain LFE signals. This adjusts the output level of the LFE channel. If the LFE signals are mixed with signals of other channels and they are output from the same speakers, the ratio of the LFE signal level to the level of the other signals can be adjusted. (See page 6 for details about the LFE channel.)

Basic operation

Select the position for the component that you want to control by turning the SELECTOR DIAL. Note: Turn the SELECTOR DIAL until it stops with a click.
Press the desired operation button. Note: Press the button with the remote control aimed at the front panel.
The position name is displayed in this window.
Indicator The indicator will flash when the button is pressed.
The lightly marked buttons do not function.

s AMP/TUN

Indicator window: Displays the names of components which can be controlled.
Note: TV POWER and TV VOLUME function if you have preset the code for your TV.

1 POWER

Indicator: Flashes in red when the button is pressed. SELECTOR DIAL: Selects the position for the component to be controlled.
This button turns the unit on.

2 INPUT

Press one of these buttons to select the required input source.

3 EXT. DEC.

Press this button when using an external decoder.

4 A/B/C/D/E

Press this button to select a group of preset stations when using the YAMAHA tuner.

TV POWER

Press this button. While the indicator is lit up for about three seconds, select a DSP program by using the number buttons (1 to 8). No DSP program can be selected after the indicator goes off.

6 PRESET (+/)

Press these buttons to select the preset station number when using the YAMAHA tuner.

TV VOLUME

7 VOLUME ( 8 MUTE
) Press these buttons to adjust the volume level.
Press this button to mute the sound. To cancel mute, press this button once more, or press the operation buttons of this unit.

9 SLEEP

Press this button to set the SLEEP timer.
(LEFT), (RIGHT) These buttons are used to adjust the settings of the SET MENU mode and the TIME/LEVEL mode.

q TIME/LEVEL

Press this button to set the unit in the TIME/LEVEL mode and to select the item.

w STANDBY

Press this button to set this unit in the standby mode.

e TEST

Press this button to output a test tone for adjusting the output level of the speakers.

r EFCT (EFFECT) ON/OFF

Press this button to turn on or off the DSP program which includes the Dolby Pro Logic decoder, the Dolby Digital decoder and the DTS decoder.

3 , (SKIP) to skip to the beginning of the next track. Press Press of the previous track.
TV VOLUME TV POWER DISPLAY TV INPUT

to skip to the beginning

4 (PLAY) Press this button to play a CD. 5
(SEARCH) This button initiates a backward search on the track that is playing to find the point from which you want to listen.
6 (PAUSE) Press this button to give a pause in operation. This button functions as PAUSE/ STOP* for operating YAMAHA CD players under factory settings. 7 (STOP) Press this button to stop operation. This button functions as PAUSE/STOP* for operating YAMAHA CD players under factory settings. 8
(SEARCH) This button initiates a fast-forward search on the track that is playing to find the point from which you want to listen.
* PAUSE/STOP function. Press the button once to give a pause in operation and once more to stop operation.

s DVD/LD

(DVD) This button turns the unit on under factory settings. If another code for your DVD player whose remote control has a power button is preset, the button will turn on the DVD player. (LD) This button turns the unit on if you have preset the code for the YAMAHA LD player. If another code for your LD player whose remote control has a power button is preset, the button will turn on the LD player.

DISC SKIP

TV VOLUME DISPLAY TV INPUT PAUSE STOP ANGLE (DVD)/SEARCH (LD) AUDIO (DVD)
TV POWER SKIP/SEARCH PLAY SUBTITLE (DVD)/SEARCH (LD) SUBTITLE ON/OFF (DVD)

s DVD MENU

This button turns the unit on under factory settings. If another code for your DVD player whose remote control has a power button is preset, the button will turn on the DVD player.

Numeric buttons

CLEAR +10 DISC SKIP TV VOLUME TITLE/INDEX TV INPUT MENU UP MENU RIGHT MENU DOWN RETURN MENU
TV POWER MENU LEFT MENU SELECT SET UP TITLE
Note: You can only control your VCR if you have preset the code for it.

CHANNEL

CHANNEL ENTER CHANNEL UP DOWN TV VOLUME TV POWER VCR REC Press this button twice to start recording. PLAY REWIND DISPLAY TV INPUT PAUSE STOP FAST FORWARD

Luxman M Electronic MCS Magnavox Marantz Matsui Mclntosh Memorex Meridian Micromega Mission Mitsubishi NAD NSM Naim Nikko Onkyo Optimus Panasonic Philips Pioneer Poppy Proton QED Quad Quasar RCA Realistic Revox Roadstar Rotel SAE Sansui Sanyo Schneider Scott Sharp Sherwood Siemens Signature Sony Teac Technics Toshiba Universum Victor Wards Yamaha Yorx
6029 6157, 6038, 6129 6157, 6029, 6038, 6129 6157, 6288, 6032, 6108, 6525, 6164 6101, 6102 6000, 6032, 6037, 6536, 6048, 6179, 6196, 6342 6303, 6029, 6367 6157, 6274, 6164, 6179 6157, 6113 6461, 6525, 6157 6157, 6202, 6513 6048, 6179, 6164 6037, 6262, 6265 6114, 6108 6000, 6207, 6303, 6157, 6108 6036, 6082, 6187, 6712 6461

MD RECORDER

Kenwood Sony Yamaha 7888, 7490

TAPE DECK

Aiwa Akai Arcam Carver Denon Fisher Grundig Harman/Kardon JVC Kenwood Magnavox Marantz Memorex Mitsubishi Onkyo Optimus Panasonic Philips Pioneer Revox Sansui Sanyo Sharp Sony Technics Victor Wards Yamaha 8029, 8197, 8200 8188, 8029 8076, 8244, 8273, 8274 8070, 8071, 8092, 8205, 8233, 8029, 8009 8099, 8136, 8135 8027, 8029 8027, 8099, 8101, 8029, 8205 8170, 8273, 8094, 8097, 8205, 8478, 8524
08DSP-A595a-CODE(EU) 314 6/24/99, 12:29 PM

Quick Reference Card

AMP/TUN TAPE/MD CD DVD/LD

STANDBY

SELECTOR DIAL INPUT EXT. DEC. A/B/C/D/E DSP PRESET UP DOWN VOLUME MUTE SLEEP TV POWER TEST EFFECT ON/OFF TV VOLUME TV POWER DISPLAY (MD) REC/PAUSE DIR A (TAPE) SKIP (MD) PLAY REWIND (TAPE) SEARCH (MD) TV POWER DECK A/B (TAPE) PAUSE (MD) DIR B (TAPE) SKIP (MD) STOP FAST FORWARD (TAPE) SEARCH (MD) SKIP PLAY SEARCH TV INPUT PAUSE STOP SEARCH DISPLAY TV POWER SKIP/SEARCH PLAY SUBTITLE (DVD) SEARCH (LD) SUBTITLE ON/OFF (DVD) TV INPUT PAUSE STOP ANGLE (DVD) SEARCH (LD) AUDIO (DVD) DISPLAY TV VOLUME DISC SKIP TV VOLUME DISC SKIP TV VOLUME INPUT INPUT INPUT

TIME/LEVEL

SET MENU

DSP program V404530

DVD MENU VCR CBL/DBS TV

Numeric buttons CLEAR

+10 DISC SKIP
CHANNEL ENTER CHANNEL UP DOWN TV VOLUME TV POWER VCR REC (*1) DISPLAY
CHANNEL ENTER CHANNEL UP DOWN TV MUTE TV SLEEP TV POWER VCR REC (*1) VCR PLAY VCR REWIND

TV EFFECT ON/OFF TV VOLUME DISPLAY TV INPUT VCR PAUSE
TV VOLUME TITLE/INDEX TV POWER MENU LEFT MENU SELECT SET UP TITLE MENU DOWN RETURN MENU TV INPUT MENU UP MENU RIGHT
TV VOLUME DISPLAY TV POWER TV INPUT MENU UP MENU RIGHT MENU DOWN RECALL MENU
TV INPUT PAUSE STOP FAST FORWARD

MENU LEFT MENU SELECT

PLAY REWIND
VCR STOP VCR FAST FORWARD
*1: Press this button twice to start recording. *1: Appuyer deux fois sur cette touche pour dmarrer lenregistrement. *1: Diese Taste zweimal drcken, um die Aufnahme zu starten. *1: Tryck tv gnger p denna knapp fr att starta inspelningen.
*1: Premere due volte questo tasto per iniziare la registrazione. *1: Presione dos veces este botn para empezar a grabar. *1: Druk tweemaal op deze toets om met opnemen te beginnen.

V404530

NATURAL SOUND AV AMPLIFIER

DSP-A595a

DIGITAL
NATURAL SOUND AV AMPLIFIER DSP-A595a POWER

CINEMA DSP

D I G I T A L SURROUND
VCR V-AUX TV/DBS DVD/LD CD TUNER PHONO

VOLUME

STANDBY/ON TAPE/MD MON

/EXT. DECODER

EFFECT

/DTS SURROUND

ENHANCED

MOVIE THEATER

MONO MOVIE

TV SPORTS

ROCK CONCERT

CONCERT HALL

SET MENU

TIME/ LEVEL

INPUT MODE

BASS PHONES SPEAKERS A B

ON OFF 5+ 2 3

TREBLE

5+ 2 3

BALANCE

5R S VIDEO VIDEO L AUDIO R

VIDEO AUX

STANDBY

DVD/LD

MOVIE THEATER ENHANCED

TAPE/MD

TV/DBS

EXT. DEC.

ENTER A/B/C/D/E

DISC SKIP PRESET

EFCT ON/OFF

CODE SET

MUTE VOLUME
INDEX SLEEP POWER TV VCR REC TV INPUT A/B DISP

SELECT

SET UP RETURN
SUBTITLE ON/OFF TITLE TIME/LEVEL
ANGLE AUDIO MENU SET MENU

POWER STANDBY

AMP/TUN
/DTS SURROUND MOVIE THEATER ENHANCED

TAPE/MD TUNER

SLEEP POWER

INDEX DISP

DISP TV

SLEEP POWER TV VCR REC

TV INPUT A/B

VCR REC

CBL/DBS

DVD MENU

SET UP
POWER STANDBY POWER STANDBY

RETURN

SUBTITLE

ON/OFF

/DTS SURROUND MOVIE THEATER ENHANCED /DTS SURROUND MOVIE THEATER ENHANCED

CD TAPE/MD CD TAPE/MD

TITLE TIME/LEVEL

PHONO V-AUX

CODE SET CLEAR
INDEX SLEEP POWER TV TV INPUT A/B VCR REC TV INPUT A/B DISP
INDEX SLEEP POWER TV VCR REC TV INPUT SET UP A/B RETURN SET UP RETURN DISP DIR A DIR B DIR A DIR B
SUBTITLE ON/OFF TITLE TIME/LEVEL ANGLE AUDIO MENU SET MENU

EXTERNAL DECODER INPUT

MAIN CENTER SURROUND

DIGITAL SIGNAL

COAXIAL DVD/LD OPTICAL DVD/LD TV/DBS

SPEAKERS MAIN

AC OUTLETS
A OR B: 6 MIN. /SPEAKER A+B:12 MIN. /SPEAKER SWITCHED 100W MAX. TOTAL

SUB WOOFER

SIGNAL GND

S VIDEO

VIDEO SIGNAL

REAR (SURROUND)

CENTER IN DVD/LD VCR OUT MONITOR OUT IN DVD/LD TV/DBS VCR OUT MONITOR OUT

8 MIN. /SPEAKER

AUDIO SIGNAL

OUTPUT

IN OUT (PLAY) (REC) TAPE/MD DVD/LD

IN TV/DBS VCR

IN DVD/LD VCR

MONITOR OUT

IN DVD/LD TV/DBS VCR

L C R RS LS LFE

LOW LOW LOW LOW LOW 120Hz

HIGH HIGH HIGH HIGH HIGH

CENTER OUT MONITOR OUT

CENTER

70mm DIGITAL DTS ENHANCED
V DIGITAL DSP V PRO LOGIC

TAPE/MD MON

TV VCR REC TV INPUT A/B

POWER STANDBY/ON

DIR A DIR B

SELECT POWER STANDBY

SUBTITLE ANGLE AUDIO MENU SET MENU

ON/OFF TITLE TIME/LEVEL

AUDIO MENU SET MENU

1), 3) 3

4 2), 4)

Q W H G

1) H G

3) H G

POWER POWER STANDBY/ON EFFECT

SPEAKERS A/B

INDEX SLEEP DISP

V DIGITAL

/DTS SURROUND ENHANCED

V PRO LOGIC

CLEAR CODE SET

VOLUME CH

SLEEP POWER INDEX DISP TV VCR REC TV INPUT A/B
INDEX SLEEP POWER TV VCR REC TV INPUT A/B SET UP DISP DIR A
SUBTITLE ON/OFF TITLE DIR A DIR B TIME/LEVEL ANGLE AUDIO MENU SET MENU
A/B/C/D/E DISC SKIP PRESET EFCT ON/OFF DISC SKIP PRESET EFCT ON/OFF

CODE SET CODE SET

INDEX SLEEP SLEEP POWER TV VCR REC TV INPUT A/B DISP VCR REC
INDEX DISP POWER TV TV INPUT A/B

SET UP SET UP RETURN

ANGLE AUDIO

SUBTITLE ON/OFF TITLE

MENU TIME/LEVEL SET MENU
INDEX SLEEP POWER TV VCR REC TV INPUT A/B VCR REC DISP SLEEP
SUBTITLE ON/OFF TITLE TIME/LEVEL ANGLE AUDIO MENU SET MENU SUBTITLE ON/OFF TITLE TIME/LEVEL ANGLE AUDIO MENU SET MENU

SET UP RETURN SET UP

INDEX SLEEP POWER DISP

DVDMENU

INDEX SLEEP POWER TV VCR REC TV INPUT DISP
INDEX SLEEP POWER TV DISP
INDEX SLEEP POWER TV VCR REC TV INPUT A/B
SUBTITLE ON/OFF ANGLE AUDIO MENU SET MENU