HS Series

Powered Near-field Monitors

HS80M Rear Panel

HS50M Rear Panel

HS10W Rear Panel

If Your Mixes Sound Good On These, They'll Sound Good Anywhere HS80M
2-way bass-reflex bi-amplified near-field studio monitor
with 8" cone woofer and 1" dome high-frequency unit delivers 42 Hz --- 20 kHz frequency response. 120 watts dynamic bi-amplified power. XLR and TRS phone jack inputs accept balanced or unbalanced signals. Large Magnets in an Advanced Magnetic Circuit Design Level control facilitates precise overall system level matching. MID EQ, ROOM CONTROL, and HIGH TRIM response control switches. LOW CUT switch. Full magnetic shielding.
with 5" cone woofer and 3/4" dome high-frequency unit delivers 55 Hz --- 20 kHz frequency response. 70 watts dynamic bi-amplified power. XLR and TRS phone jack inputs accept balanced or unbalanced signals. Large Magnets in an Advanced Magnetic Circuit Design Level control facilitates precise overall system level matching. MID EQ, ROOM CONTROL, and HIGH TRIM response control switches. LOW CUT switch. Full magnetic shielding.
8" bass-reflex powered subwoofer delivers solid 30 Hz --- 120 Hz frequency response. 150 watts dynamic power. XLR and TRS phone jack inputs accept balanced or unbalanced signals. Balanced XLR L and R outputs connect to the main left and right speakers. L/R mix output connects to a second

subwoofer if required.

Level control facilitates precise overall system level matching. Phase switch simplifies phase alignment. Low-pass filter control and high-pass filter control with ON/OFF switch. Full magnetic shielding.

GENERAL SPECIFICATIONS

Model Type Crossover frequency Frequency response (-10dB) Dimensions (W x H x D) Weight HS80M Bi-amp 2-way powered speaker 2kHz 42Hz-20kHz 250 x 390 x 332mm (9.8" x 15.4" x 13.1") 11.3kg (24.9lbs) HS50M Bi-amp 2-way powered speaker 3kHz 55Hz-20kHz 165 x 268 x 222mm (6.5" x 10.6" x 8.7") 5.8kg (12.8lbs) HS10W Powered subwoofer 30Hz-180Hz 300 x 350 x 386mm (11.8" x 13.8" x 15.2") 12.5kg (27.6lbs)

SPEAKER SECTION

Model Component Enclosure LF HF Type Material HS80M 8" cone 1" dome Bass-reflex type MDF HS50M 5" cone 3/4" dome Bass-reflex type MDF HS10W 8" cone Bass-reflex type MDF

AMPLIFIER SECTION

Model Output Input sensitivity, Impedance Output sensitivity, Impedance Input terminal (Parallel) Output terminal Control switch Total LF HF HS80M 120W (Dynamic power) 75W (4) 45W (8) HS50M 70W (Dynamic power) 45W (4) 25W (8) +4dBu, LEVEL = Center -10dBu, LEVEL = Max 1:XLR3-31 (Balance) 2:PHONE (Balance) LEVEL (+4dB/center click) LOW CUT switch (FLAT/80/100Hz,12dB/octave) EQ: MID(+/-2dB at 2kHz), EQ: HIGH(+/-2dB at HF) ROOM CONTROL (0/-2/-4dB: Under 500Hz) Indicator Power consumption POWER ON: White LED 60W 45W 70W 1:XLR3-32 (Balance)x1 (EXT SUB) 1:XLR3-32 (Balance)x2 (L&R) LEVEL LOW CUT switch, control: 80-120Hz HIGH CUT control: 80-120Hz PHASE switch: NORM./REV. -10dBu/600 HS10W 150W (4, Dynamic power)

DIMENSIONS

unit : mm

250 (9-13/16")

332 (13-1/16")

165 (6-1/2")

222 (8-3/4") 300 (11-13/16") 386 (15-3/16")

390 (15-3/8")

268 (10-9/16")

350 (13-3/4")