Espaol

Owners manual Bedienungsanleitung Mode demploi Manual de instrucciones

Franais

Deutsch

MONITOR SPEAKER

English
Explanation of Graphical Symbols

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The above warning is located on the rear of the unit
IMPORTANT SAFETY INSTRUCTIONS
1. 2. 3. 4. 5. Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. Water and Moisture The appliance should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer. 6A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the ow of air through the ventilation openings. Heat The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including ampliers) that produce heat. 10. Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. 12. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning The appliance should be cleaned only as recommended by the manufacturer. 14. Nonuse Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 16. Damage Requiring Service The appliance should be serviced by qualied service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Servicing The user should not attempt service the appliance beyond that described in the operating instructions.

MSP5AOwners manual

Thank you for purchasing Yamaha MSP5A monitor speaker. The MSP5A features a compact bass reex cabinet, with 12 cm two-way cone speaker and 2.5 cm titanium dome speaker. This powered bi-amplier speaker system faithfully reproduces sound and can be used for a wide range of applications, from personal home recordings to serious professional use. Please read this Owners Manual thoroughly to make the best use of the MSP5As quality functions for a long period of time.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

Only use the voltage specied as correct for the device. The required voltage is printed on the name plate of the device. Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.

Water warning

Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality
If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualied Yamaha service personnel. If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualied Yamaha service personnel.

Do not open

Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualied Yamaha service personnel.
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:
Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.

Location

Always consult qualied Yamaha service personnel if the device installation requires construction work, and then choose mounting hardware and an installation location that can support the weight of the device, avoiding locations that are exposed to constant vibration, and making sure to use the specied hardware. After construction or installation, have the device inspected by qualied Yamaha service personnel periodically. If you use a stand, check the stands specications and make sure that it is sturdy enough to support the weight of the speaker. You may need to limit the number of people around the placed stand, in order to avoid toppling the device or causing damage to the internal components. Before moving the device, remove all connected cables.
Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater) to prevent the possibility of panel disguration or damage to the internal components. Do not place the device in an unstable position where it might accidentally fall over. Do not block the vents. This device has ventilation holes at the rear to prevent the internal temperature from rising too high. In particular, do not place it in any poorly-ventilated location, such as a bookcase or closet. Do not place the device against a wall or other devices since this can cause inadequate air circulation, and possibly result in the device overheating. Make sure there is adequate space between the device and any surrounding wall or other devices: at least 5 cm at the sides, 10 cm behind and 10 cm above.
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold ().
Yamaha cannot be held responsible for damage caused by improper use or modications to the device.
Always turn the power off when the device is not in use.

Connections

Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.
Although this speaker system is magnetically shielded, you may need to move it further away from a video monitor or display if unnatural color shift or image distortion occurs. The rubber feet included in this package can be attached to the speaker to prevent slippage when it is to be used on a slippery surface. Air blowing out of the bass reex ports is normal, and often occurs when the speaker is handling program material with heavy bass content.

Handling caution

Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into the bass reex ports (the two holes on the front of the cabinet). If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualied Yamaha service personnel. Do not use the device for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in re. Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors.
Interference From Cell Phones
Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system.
IMPORTANT Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the bottom or rear of the unit. Retain this Owners Manual in a safe place for future reference.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED ACCORDANCE WITH THE FOLLOWING CODE: BLUE : BROWN : NEUTRAL LIVE IN
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. * This applies only to products distributed by YAMAHA KEMBLE MUSIC (U.K.) LTD.
* Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation. * Company names and product names used in this Owners Manual are trademarks or registered trademarks of their respective owners.

Front panel/Rear panel

NEUTRIK 1
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

3 POWER switch

This switch turns the power to the MSP5A on and off. When you turn this switch on, the green power indicator (1) on the front panel lights up.

4 TRIM switches

These switches enable you to adjust the bass and treble for the MSP5A.
LOW: four positions The LOW switch adjusts the bass range. With the +1 setting, the bass range is boosted by 1.5 dB. With the 1 and 2 settings, the bass range is cut by 1.5 dB. (See performance graph.) HIGH: three positions The HIGH switch adjusts the treble. With the +1 setting, the treble range is boosted by 1.5 dB. With the 1 setting, the treble range is cut by 1.5 dB. (See performance graph.)

1 Power indicator

This indicator lights up green when you turn the POWER switch ON (3).

2 VOL (Volume) control

This control knob enables you to adjust the overall sound volume. Rotating the control counter clockwise lowers the volume level. Rotating it clockwise raises the volume level.

5 INPUT jacks

LINE 1 This is an XLR-type jack used to connect a balanced. LINE 2 This is a monaural phone jack used to connect an unbalanced line output.

Specications

General specications
Type.. Bi-Amp 2-way Bass Reex Powered Speaker Crossover Frequency. 2.5 kHz Frequency Range.. 50 Hz40 kHz Maximum Output Level.. 101 dB (1 m on Axis) Dimensiones (W H D). 222 mm Weight.. 7.5 kg Controls TRIM switch LOW: 4 positions (+1.5 dB, 0 dB, 1.5 dB, 3 dB at 60 Hz) HIGH: 3 positions (+1.5 dB, 0 dB, 1.5 dB at 15 kHz) Power switch: On/Off VOL control Power Indicator.Green LED Power Requirement USA and Canada: AC120 V, 60 Hz Europe: AC230 V, 50 Hz China: AC220V, 50Hz Korea: AC220V, 60Hz Others: AC240 V, 50 Hz Power Consumption..60 W Accessories.Non-skid pads 2, Owners manual

Speaker unit

Speaker Unit LF: 12 cm cone (4, magnetic shielded) HF: 2.5 cm titanium dome (6, magnetic shielded) Enclosure Type: Bass Reex Volume: 6.3

Amp.unit

Maximum Output Power LF: 40 W at 400 Hz, THD= 0.02%, RL=4 HF: 27 W at 10 kHz, THD= 0.02%, RL=6 Input Sensitivity/Impedance Line 1: +4 dB/10 k (XLR Blanced) Line 2: 10 dB/10 k (phone Unblanced) Signal to Noise Ratio. 100 dB (A Weighted)
Specications and descriptions in this owners manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specications at any time without prior notice. Since specications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

Dimensions

H: 279 110* W: 169 * Non-skid pad positions. 20* 7

171.5 D: 222

2-M5 (For mounting bracket)

Unit: mm

LINE 1 INPUT VOL LINE 2 LOW HIGH TRIM TRIM
Performance graph/Frequenzgrak/Graphique de performance/Grco de operacin/
1 W at 1 kHz / 1 m on Axis An anechoic room

100 90

RESPONSE [dB]

500 1k 2k 5k 10k 20k 40k

FREQUENCY [Hz]
Block Diagram/Blockschaltbild/Schma/ Diagrama en bloques/
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de dtails sur les produits, veuillez-vous adresser Yamaha ou au distributeur le plus proche de vous gurant dans la liste suivante.

DENMARK

YS Copenhagen Liaison Ofce Generatorvej 8B DK-2730 Herlev, Denmark Tel: 49 00

THAILAND

Siam Music Yamaha Co., Ltd. 121/60-61 RS Tower 17th Floor, Ratchadaphisek RD., Dindaeng, Bangkok 10320, Thailand Tel: 02-641-2951
PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanizacin Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panam, Panam Tel: +507-269-5311

NORWAY

Norsk lial av Yamaha Scandinavia AB Grini Nringspark 1 N-1345 sters, Norway Tel: 77 70
THE PEOPLES REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co., Ltd. Shanghai Branch United Plaza 25F 1468 Nan Jing Road West Jingan Shanghai 200040, China Tel: 21-6247-2211

OTHER EUROPEAN COUNTRIES

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030

EUROPE

THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313

AFRICA

GERMANY
Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

MIDDLE EAST

TURKEY/CYPRUS
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990

OTHER COUNTRIES

Yamaha Music Gulf FZE LB21-128 Jebel Ali Freezone P.O.Box 17328, Dubai, U.A.E. Tel: +971-4-881-5868
COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN

AUSTRIA

Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

THE NETHERLANDS

Yamaha Music Central Europe, Branch Nederland Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2441
PA07 Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/ M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2003 Yamaha Corporation 308IP01A0 Printed in China

LOUDSPEAKER ACCESSORIES

Yamaha offers an array of solution based speaker accessories to assist in addressing a wide variety of placement/ positioning situations. All significant dimensions are included to help in selecting the proper accessory. Visit your local dealer or our website (www.yamaha.com/ proaudio) to get information on our loudspeaker lines.
BWS50 Mounting Brackets Series Wall/Ceiling
The BWS50 Series allows mounting of loudspeakers weighing up to 30 lbs. They are a perfect mate for the Yamaha MSR100 powered speaker but can easily adapt to other speaker systems as well. Collars on both ends of the bracket allow 360 rotation. Additionally, the joint in the shaft of the bracket swivels over 200 (in 6 increments). Adjustability like this allows an endless possibility of mounting positions. (Packed and sold in pairs)
All bracket hardware is designed for maximum safety. Adjustment points are connected in a way that keeps them from coming apart, even if all the adjustment screws are missing! Screws to attach these brackets to the speaker are supplied with the speaker. Hardware required to attach these brackets to the wall or ceiling is not supplied. Thick steel flanges on these brackets are both welded AND riveted to ensure maximum strength.

434"

2916"

318"

4" Dia. 618"

612"

378" 10516"

7716"

BWS50-260

BWS50-190

BWS20 Mounting Brackets Series Wall/Ceiling
The BWS20 Series allows mounting of loudspeakers weighing up to 17 lbs. These brackets are designed for use with the Yamaha MS101II, MS202II, MSP3 and MSP5A, but will also work with other speaker systems. 360 rotation of both the base and top plate, and a 200 swivel built into the shaft provide unmatched flexibility. Hardware is included. (Packed and sold in pairs)

4" Dia.

31516" 3"

3716"

238" 3"

TOP PLATE

BWS20-120 BASE

618" 434"

BWS20-190 BASE
7716" 518" 458" 238"

BWS20-190

BWS20-120
SMMounting Bracket SPKR BRKT Wall
This bracket provides a low cost solution for mounting smaller (up to 15 lbs.) speaker systems. An ingenious radiused mounting plate allows up to a 140 rotation. The wall and speaker components separate for ease in mounting. Screws are included to attach the bracket to Yamaha MS101II, MS202II, MSP3 and MSP5A speakers. Other loudspeakers can also be accommodated. Steel cables are included. (Packed and sold in pairs)

312"

3"

3316"

WALL PLATE

SPEAKER PLATE

BWS108 Bracket for the AS108 and Wall Mounting

AS108II

The BWS108 is made specifically for the AS108 and AS108II. They are constructed of heavy gauge powder-coated steel. These brackets can be used either horizontally or vertically. (Packed and sold in pairs)
MS400 EYEBOLT Flying Hardware
Forged steel eyebolts made especially for direct attachment to the Yamaha MS300 and MSR100. (Packed and sold in pairs)

BAS10Clamp Free Angle

The BAS10 frees up desk or counter space by elevating the speakers up to 14" above the work surface. Its clamp allows horizontal or vertical mounting. The ball and socket design allows easy tilting and positioning. Built specifically for the MS101II, MS202II, MSP3 and MSP5A. (Packed and sold in pairs)

STS2 Stand Table Top

The STS2 stand supports loudspeakers on any flat surface. The versatile design allows the speaker to be secured at either a forward or backward tilt. Screws are included for attachment to MS101II, MS202II, MSP3 and MSP5A. The STS2 is sold as a single unit.
BMS10A Adapter Microphone Stand
The BMS10A adapter provides microphone stand mounting for loudspeakers up to 11 lbs. The BMS10A fits the 5/8"-27 thread standard and comes with a 3/8"-16 European adapter. The BMS10A includes screws to attach MS101II, MS202II, MSP3 and MSP5A speakers. Additionally, the BMS10A will support the Yamaha MG10/2 and MG8/2FX mixers. The BMS10A is sold as a single unit.
VARISTANDMonitor Platform Adjustable Height
The Varistands all-steel design gives solid support for small monitor speaker systems. Designed to support the MSP5A, its mounting platform will accept numerous bolt patterns. The T-shaped base has a very small footprint for easy placement in tight spots behind desks and consoles. The base is hollow, allowing the addition of sand or lead ballast to increase stability. Height is adjustable from 27" to 42". Maximum recommended weight is 20 lbs. per stand. (Packed and sold in pairs)

6"

1514"
SS138B Stand Tripod Speaker
Despite its lightweight aluminum construction (5.1 lbs.), the SS138B tripod stand safely supports up to 70 lbs. Its inner tube is the standard 138 " diameter and fits the Club V and BR Series speakers. The included speaker adapter plate allows stand mounting of Yamahas MSR100 and many competitive loudspeaker brands. SS138B stands are packed and sold as a single unit.

3716" 438"

458" 71316"
SPKRMounting Pole POLE Speaker
Strong steel tube with a 138 " outside diameter, 48" long. Can be easily cut to length to support Club V or BR Series loudspeakers above a SW118V or SW115V as shown. Finished in satin black for good looks and durability. (Packed and sold in pairs)

48"

Club Series SW115V / CW115V SW118V / CW118V SM15V / CM15V SM12V / CM12V SM10V / CM10V

Powered Speakers

Yamaha Speaker Model

S115V / C115V

S112V / C112V
Bracket BWS50-260 BWS50-190 BWS20-190 BWS20-120
SM SPKR BRKT BWS108 BAS10 STS2 BMS10A VARISTAND SS138B MS400 Eyebolt SPKR POLE

Visit your local dealer or our website for information on our loudspeaker lines. www.yamaha.com/proaudio

Club V Series Speakers

BR Series Speakers

MG10/2 mixer

MSP10Studio

BR Series

MSR100

MS202II

MS101II
For details please contact:
Yamaha Corporation of America Professional Audio Products www.yamaha.com/proaudio 6600 Orangethorpe Avenue Buena Park, CA Yamaha Corporation of America. All specifications subject to change without notice. All other products or services mentioned are trademarks of their respective owners.