City Select Second Seat Kit Instructions
1 From the front of, and facing the stroller, remove right front mounting bracket plug by firmly pressing the black button located above the front wheel and pulling up on the plug. Repeat on left side. 2 Insert right Adaptor Bracket into the right mounting bracket until it clicks into place. Repeat on left side. NOTE: The Adaptor Brackets are labeled with an L or R for your convenience. 3 Align mounting brackets on the second seat with the top of the Adaptor Brackets.
This Kit Includes: 1 City Select Seat 2 Adaptor Brackets
4 Insert seat onto Adaptor Brackets until it clicks into place.
To Remove the City Select Second Seat:

When Rear Facing:

Adaptor Brackets
WARNING: Always remove child from seat before removing seat from frame.
The sample product shown on this manual may differ slightly from your production quality City Select Second Seat Kit. However, this will not affect the assembly or functionality of your Baby Jogger product.
1 Remove child from seat. Press grey buttons on seat mounting brackets and pull up until the seat detaches. 2 Press silver button on right Adaptor Bracket and pull upwards. Repeat on left side.
NOTE: Replace mounting bracket plugs when second seat is not in use.
To make room for the seats footwell: Unzip the right front and left front portions of the basket.
8575 Magellan Parkway, Suite 1000 Richmond, VA 23227 T: 800-241-1848 F: 804-262-6277 www.babyjogger.com
NOTE: Your City Select Second Seat Kit can also be used facing the rear of the stroller.
To adjust the footwell: Press both buttons on the side of the footwell and pull footwell upwards.

Assembly Instructions

City Select
Amazing 360 Turns Make For Extreme Maneuverability
Read these instructions carefully before use and keep them for future reference. Your childs safety may be affected if you do not follow these instructions.
For the sake of your precious cargo, please read these warnings before using your stroller.
arning: DO NOT exceed 3mph this stroller is not suitable for running, jogging, W skating or roller blading. arning: Prevent serious injury to your child by always using the safety harness. W arning: Parcels or accessory items, or both, placed on the unit may cause the unit W to become unstable. arning: Never leave your child unattended. W arning: Recommended weight for seat pocket is 2 lbs and basket is W 15 lbs. Excessive weight may cause a hazardous unstable condition to exist. arning: Stroller is not meant to be used for transporting children up or down W stairs. Damage resulting to stroller will not be covered under warranty. arning: Child may slip into leg openings and strangle. Never use in reclined W carriage position unless safety harness is properly fastened. ccessories which are not approved by the manufacturer or distributor A shall not be used. he passenger shall remain seated (no standing in the stroller). T atch out for cars never assume that a driver can see you and your child. W otal weight load recommended for this stroller is 45 lbs / 20.4 kg per seat T (combined passenger and baggage weight). his stroller seats one passenger. Additional accessory items may be purchased to seat T more than one passenger. (Maximum Passenger Loaded: 2 Passengers/per stroller) t may be unsafe to use replacement parts other than those supplied or approved I by the manufacturer. Always have your brake locked when loading and unloading of children.
NOTE: The sample product illustrated in this manual may differ slightly from your production quality City Select. However, this will not affect the assembly or functionality of your Baby Jogger product. 2
W arning: Ensure all locking devices are engaged before use.
1 Unpack stroller from box and set wheels aside. 2 Unsnap storage lock from around the frame.
3 Pull bottom of frame up and away

from handlebar.

4 he stroller frame will click into place. T
5 To adjust handle length: Simply squeeze gray
button on handle and slide the handle up or down to the desired length.

Front Wheel

Rear Wheels
1 install front wheel: Lift up slightly on the To
2 To remove front wheel: Press gray tab on
1 install rear wheel: Gently slide the rear To
front left portion of the stroller frame. Align the round opening on the wheel mount with the front wheel axle. Slide the front wheel into opening until it clicks into place. Repeat on other side.
front wheel mount and slide front wheel out.
wheels axle into the hole in frame until the wheel clicks into place.
2 To remove rear wheel: Simply press the
wheel button while gently sliding the wheel away from the frame.
3 engage stationary wheel: Slide gray lever, To
located above front wheel, to the left. Repeat on opposite side.
4 engage swivel wheel: Slide gray lever, To
located above the front wheel, to the right to engage swivel. Repeat on opposite wheel.
o engage parking brake: Gently pull T brake lever into upright position until it clicks into place.
o release parking brake: Pinch gray tabs T and pull towards you. Push brake lever down until it is parallel with the frame.

Safety Harness

Canopy
1 To attach canopy to frame: Attach
canopy brackets to sides of seat frame. NOTE: There are two canopy attachment locations to be used depending on the height of your child.
1 Unclip top of shoulder strap
from the seat and re-clip on the seat loops closest to your childs shoulder height.

2 To adjust the shoulder and crotch strap length: slide the plastic
guide up or down to lengthen or shorten.
3 To buckle the harness: Simply
push top right buckle into center buckle until it clicks into place. Repeat on other side.
4 To unbuckle harness: Push one side of the
center button and pull the corresponding side buckle away from the center buckle. Repeat to unbuckle other side.
W arning: Always attach mesh to rear of sun canopy and pull down behind seat when used in conjunction with the seat unit.

To assemble seat:

Reclining Seat
1 To assemble seat: Secure seat fabric to
seat frame by lining up snap placement on the frame and fabric.
2 Secure seat straps around the bottom of the
frame, behind the front wheel. Thread one seat strap through the D ring of the other strap, and fasten both Velcro sides firmly together.
1 Squeeze lever located under the top of the seat,

behind the canopy.

2 Pull down to lower seat and pull
up to raise seat until it clicks into the desired position.

To place seat on frame:

Adjustable Footwell

1 Remove mounting

bracket plugs by gently pulling on them.
2 Locate desired seat position
on stroller frame. Align seat adaptor brackets with mounting brackets on stroller frame.
3 Slide seat into brackets until it clicks
into place. Ensure both sides of seat are securely fastened into frame before use.
To remove seat: 1 Press gray tabs on
Adaptor Brackets and pull up.
W arning: Always remove child from seat before removing seat from frame.
1 To lengthen or shorten footwell: Press
buttons on lower portion of footwell and slide in or out until it clicks into place.
2 To raise or lower footwell: Press buttons on
upper portion of footwell and pull up or push down until it clicks into the desired positon.

Basket

Quick Fold Technology

Simple Lift & Fold

(Patented)
1 Fasten top snaps of basket around
middle support bar of stroller frame.
3 Hook the top front plastic loop over the
metal knob on the front of the frame. Repeat on opposite side.
2 Fasten bottom snaps of basket around
side support bars of stroller frame.
1 To fold stroller: Remove child from seat. Pull up on both fold handles at the same time with a gentle tug.
4 Hook lower front loop around hook
behind front wheel mount.
2 Snap storage lock around frame to prevent
frame from opening when carrying or storing.
As your family grows, so can your City Select.

In Motion

Steering
teering your stroller is simple: It is balanced to turn with just a light touch on the handlebar without S having to lift the front wheel.

In the Dark

ince we are concerned about the safety of you and your child, we recommend that you not use S your stroller at night. However, if you choose to, please attach reflective strips to the wheels and the seat. Bicycle lights can also be mounted on the handle crossbar. These accessories can be found at most bike stores.

Maintenance

o preserve the longevity of your stroller, it is important to perform simple, regular maintenance. T The tires on your stroller are foam filled. Though the P.S.I is printed on the tire, you will never need to inflate them. From time to time, make sure that the joints and folding areas are still in good condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop for added lubrication. All repairs should only be carried out by an authorized dealer.
NOTE: Bassinet Kit, Car Seat Adaptor Kit and Second Seat Kit Sold Separately.

Stroller Care

Washing
ou can machine wash your strollers seat in cold water with a mild detergent. Y To minimize shrinkage, simply reattach the seat to the frame to dry. (Please do not put the seat in the dryer!) e sure to remove the frame and PE board from the back of the seat before washing. B
WarrAnty Registration On-Line AT
www.babyjogger.com/register
Baby Jogger's Limited Lifetime Warranty:
Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturers defects include but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components shall be warranted for one year from the date of purchase (except for tubes and tires). Proof of purchase is required to make a warranty claim and the warranty is only extended to the original purchaser. This warranty does not cover: ormal wear and tear N orrosion or rust C ncorrect assembly, or the installation of third party parts or accessories not compatible with the original design I ccidental or intentional damage, abuse or neglect A ommercial Use C mproper storage/care of the unit I

Wheel Care

he wheels can be cleaned using a damp cloth. T They will need to be dried completely with a soft towel or cloth.

Storing

unshine can fade seat fabric and dry out tires, so storing your stroller indoors will S prolong its good looks. However, if you do store it outside, using a tarp will help protect against weather wear.
This warranty specifically excludes claims for indirect, incidental, or consequential damages. The implied warranties of merchantability and fitness for a particular purpose is according to the specific warranty period for this model unit at time of purchase. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are in your state, consult your local or state consumer affairs office or your states Attorney General. E-Mail: customerservice@babyjogger.com Call: 1-800-241-1848 between 8am 6pm EST, Mon. Fri. Fax: 1-804-262-6277 Mail: Baby Jogger Company 8575 Magellan Parkway Suite 1000 Richmond, VA 23227

Thank You!

We wish you many happy journeys with your new stroller! Your stroller is a great product, and we are proud to manufacture it. If you have any questions or comments, please give us a call at:

1.800.241.1848

Baby Jogger is a Division of Dynamic Brands 8575 Magellan Parkway, Suite 1000 Richmond, VA 23227 T: 800.241.1848 F: 804.262.6277 www.babyjogger.com