RYOBI ROUTER MODEL NUMBERS R161
WARNING: Improper repair of a double insulated tool can result in damages to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579 in the United States or 1-866-897-9624 in Canada.
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your ROUTER or when ordering repair parts.

PARTS LIST

Key No. 27 Part Number 974323-003 999053-003 973671-003 989592-002 982747-001 973658-001 982749-001 617834-001 989573-001 973679-003 612858-001 974951-001 968303-098 714096-807 616081-014 968304-026 611686-003 612848-007 968307-119 968305-010 968306-125 622167-012 968305-020 989985-003 623173-005 973252-001 970105-020 Description Quan. 1 Key No. 50 Part Number 973657-001 973688-001 612556-003 973659-001 973975-002 973672-002 974908-004 726676-002 975062-001 968700-009 610120-005 974516-001 974239-004 973669-001 622347-020 970712-002 973689-001 975063-001 623924-007 968303-046 998586-001 973668-002 989935-006 972000-891 9-01 Description Quan. 1
LABEL... SCREW (#5-10 X 1/2 IN. FIL. HD.). ACTUATOR BUTTON... SCREW (#8-10 X 1-3/8 IN. FIL. HD.). DATA PLATE.. END CAP... LOGO PLATE... BUMPER... RETAINER CLIP.. SHAFT LOCK LEVER... SLIDE LOCK ASSEMBLY.. SPRING... SWITCH.. SCREW (#10-16 X 1 IN. FIL. HD. T.F.). SCREW (#8-18 X 11/16 IN. PAN HD.). BRUSH ASSEMBLY.. BRUSH TUBE... TOP BEARING PLATE.. FIELD.. BALL BEARING (NTN#608ZZ/1E).. ARMATURE... RETAINING RING.. BALL BEARING (NTN#6001LLBC3/1E). 1/4 IN. COLLET NUT.. WIRE NUT... CORD LABEL.. CORD...
MOTOR HOUSING.. POINTER... SCREW (#8-18 X 9/16 IN. FIL. HD. T.C.). LOWER BEARING PLATE.. POWER HANDLE CORD. CHIP SHIELD.. BASE.. SET SCREW (#8-32 X 7/16 IN. FLAT POINT). AUXILIARY HANDLE.. SCREW (#6-19 X 5/8 IN. PAN HD.).. SCREW (#6-10 X 3/4 IN. PAN HD.).. SCREW (#4-40 X 3/4 IN. PAN HD.).. RING ASSEMBLY.. DEPTH LOCK LEVER... WASHER... SHOULDER SCREW (#10-32 X 5/16 IN. PAN HD.).. SHAFT LOCK LABEL.. POWER HANDLE.. NEEDLE ROLLER.. SWITCH TRIGGER.. SCREW (#10-32 X 1/4 IN. PAN HD.). SUBBASE.. WRENCH... OWNERS MANUAL

RYOBI DOUBLE INSULATED FIXED BASE ROUTER MODEL NO. R163 REPAIR SHEET
RYOBI FIXED BASE ROUTER MODEL NUMBER R163
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your ROUTER or when ordering repair parts.

PARTS LIST

NUMBER

DESCRIPTION

* * * * * 983000958 06-18-07 (REV:02)
Screw (10-32 x 1/4 in.)..4 Subbase Assembly...1. Chip Shield...1 Screw (#8-10 x 5/8 in. Philips Pan Hd.)..4 Right Handle Assembly..1 Screw (#10-24 x 9/16 in. Torx Recess Pan Hd.)..2 Left Handle Assembly...1 Hex Lock Nut (1/4-20 )...1 Lever Pin...1 Wear Plate....1 Lock Lever...1. Roll Pin....1 Router Base/Spindle Lock Actuator Kit (Includes Key 3 on pages 4-5)...1. E-Ring...1. Torsion Spring...1 Height Adjustment Bar...1 Height Adjust Screw...1. Depth Adjust/Zero Reset Ring Assembly..1. Screw (M3.5 x 12 mm Flat Hd.)..1 Quick Release Button...1. Compression Spring...1. Bag (Not Shown)..1 Operators Manual (960001217)
* Standard Hardware Item May Be Purchased Locally

SECTION A

The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your ROUTER MOTOR or when ordering repair parts.

PARTS LIST FOR SECTION A

KEY PART
* * * * * * 690190002 * * 33 671250001
Screw (8-18 x 24 Pan Hd.)...4 Screw (M3.5 x 14.5 Pan Hd.)..1 Router Base/Spindle Lock Actuator Kit (Included With Key 13 On Pages 2-3)..1 Torsion Spring...1 Bearing Frame...1 Ball Bearing (6003)...1 Screw (M5 x 13 mm Wafer Hd.)..2 LED Work Light Assembly...1 Motor Housing...1. On/Off Switch...1 Power Cord Assembly..1. Cord Clamp...1 Screw (M4 x 16 mm Pan Hd.)...6 Top Bearing Bracket...1. Screw (M0.17 x 3/4 in. Pan Hd.)..4 Circuit Board Assembly..1. Screw (6-19 x 5/16 in. Pan Hd.)..1 Upper Cap Assembly (Inc. Key Nos. 30 and 31)..1. LED Work Light & Frame (Inc. key Nos. 5 and 8)..1 Collet Nut...1 Retaining Ring...1 Armature...1. Brush Assembly...2 Brush Tube Clamp...2. Screw (8-16 x 1/2 in. Pan Hd.)..2 Ball Bearing (CW 608RS)...1 Screw (M4.3 x 56)...2 Field...1. Chip....1 Logo Label...1 Data Label....1 Cord Label...1. Wrench....1
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY
NOTE: The assembly shown represents an important part of the double insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest authorized service center.

POWER CORD

WHITE LEAD

BLACK LEAD

PCB ASSEMBLY SWITCH BROWN LEAD RED LEAD WHITE LEAD MOTOR

BROWN LEAD

BRUSH ASSEMBLY

WIRING DIAGRAM