Reviews & Opinions
Independent and trusted. Read before buy Asus A8NE-FM!

Asus A8NE-FM

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Asus A8NE-fm Motherboard, size: 1.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Asus A8NE-FMAbout Asus A8NE-FM
Here you can find all about Asus A8NE-FM like s and other informations. For example: bios specmanual, drivermotherboard.

Asus A8NE-FM manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Asus A8NE-FM please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Asus A8NE-FM photo ]

Video review

Windows Vista Test Stabilit

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
Giannini 2:56pm on Friday, September 17th, 2010 
Great value. Very stable and fast, this motherboard booted right away. It has both coaxial and optical digital audio outputs. Good for the price what more can u ask for? Great Board Alot of features Board was D.O.A and now i await the new board
Lilrayray 2:51am on Sunday, July 11th, 2010 
Absolutely no problems ; ASUS always seems to deliver The only small thing (which I knew about prior to purchase) is the lack of IEEE1394 port on the ...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Installing a DIMM
Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 2
Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.

DDR DIMM notch

Unlocked retaining clip
A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.
Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.

Locked retaining clip

Removing a DIMM
To remove a DIMM: 1. Simultaneously press the retaining clips outward to unlock the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.
Remove the DIMM from the socket.

Expansion slots

In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

1. 2. 3. 4. 5. 6.

Installing an expansion card
To install an expansion card: Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. Remove the system unit cover (if your motherboard is already installed in a chassis). Remove the bracket opposite the slot that you intend to use. Keep the screw for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Secure the card to the chassis with the screw you removed earlier. Replace the system cover.
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings. 1. 2. 3. Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for information on BIOS setup. Assign an IRQ to the card. Refer to the tables on the next page. Install the software drivers for the expansion card.
Standard interrupt assignments
IRQ Priority 10 Standard Function System Timer Keyboard Controller Re-direct to IRQ#9 Communications Port (COM2)* Communications Port (COM1)* IRQ holder for PCI steering* Floppy Disk Controller Printer Port (LPT1)* System CMOS/Real Time Clock IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering* PS/2 Compatible Mouse Port* Numeric Data Processor Primary IDE Channel Secondary IDE Channel

+5V +5VSB (Default)

USBPW78 USBPW56
A8NE-FM USB device wake up

+5VSB (Default)

The USB device wake-up feature requires a power supply that can provide 500 mA on the +5VSB lead for each USB port; otherwise, the system would not power up. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.
BIOS Recovery (3-pin BIOS_R) The force BIOS recovery jumper allows you to force recover the BIOS settings when the BIOS gets corrupted or destroyed. The jumper block is on pins 1 and 2 during normal operation (default). To force recover the BIOS, set the jumper block on pins 2 and 3. To recover the BIOS: 1. Turn OFF your computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. 3. Insert a floppy disk with the original or updated BIOS file, and rename the BIOS file name as A 8 N E - F M. R O M M. 4. Plug the power cord and turn ON the computer. 5. The system searches for the BIOS file in the floppy then reflashes the BIOS. 6. When finished, shut down your computer. 7. Replace the jumper cap from pins 2-3 to pins 1-2. 8. Reboot your computer. 9. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.

Default Recovery

A8NE-FM BIOS recovery jumper

Connectors

Rear panel connectors

1. 2. 3.

P S / 2 m o u s e p o r t ( g r e e n ). This port is for a PS/2 mouse. P a r a l l e l p o r t. This 25-pin port connects a parallel printer, a scanner, or other devices. I E E E a p o r t. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. L A N ( R J - ) p o r t. This port allows connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. L i n e I n p o r t ( l i g h t b l u e ). This port connects a tape, CD, DVD player, or other audio sources. L i n e O u t p o r t ( l i m e ). This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out. M i c r o p h o n e p o r t ( p i n k ). This port connects a microphone.
Audio 2, 4, or 6-channel configuration
Port Light Blue Lime Pink Gray Black Yellow Orange Headset 2-channel Line In Line Out Mic In 4-channel Line In Front Speaker Out Mic In Rear Speaker Out 6-channel Line In Front Speaker Out Mic In Rear Speaker Out Center/Subwoofer
U S B 2. 0 p o r t s 3 a n d 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. U S B 2. 0 p o r t s 1 a n d 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.
1 0. C o a x i a l S / P D I F O u t p o r t. This port connects an external audio output device via a coaxial S/PDIF cable. t. 1 1. S e r i a l p o r t This 9-pin COM1 port is for pointing devices or other serial devices. 1 2. P S / 2 k e y b o a r d p o r t ( p u r p l e ). This port is for a PS/2 keyboard.

Internal connectors

Floppy disk drive connector (34-1 pin FLOPPY1) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
A8NE-FM Floppy disk drive connector
IDE connectors (40-1 pin IDE1, IDE2) These connectors are for an Ultra DMA 100/66 signal cable. The Ultra DMA 100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive), and a gray connector for an Ultra DMA 100/66 IDE master device (hard disk drive). If you install two hard disk drives, you must configure the second drive as a slave device by setting its jumper accordingly. Refer to the hard disk documentation for the jumper settings.
Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector. This prevents incorrect insertion when you connect the IDE cable. Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.
NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

A8NE-FM IDE connectors

Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
These connectors are set to Standard IDE configuration by default. In Standard IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors.
GND RSATA_RXN4 RSATA_RXP4 GND RSATA_TXN4 RSATA_TXP4 GND
GND RSATA_RXN3 RSATA_RXP3 GND RSATA_TXN3 RSATA_TXP3 GND
GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND

A8NE-FM SATA connectors

GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND

Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only, and may not exactly match what you see on your screen.

BIOS menu bar

Use this menu to make changes to the basic system configuration. Use this menu to enable and make changes to the advanced features. Use this menu to configure and enable Power Management features. Use this menu to configure the default system device used to locate and load the Operating System. Use this menu to exit the current menu or to exit the Setup program.
The top of the screen has a menu bar with the following selections:

ADVANCED POWER BOOT EXIT

To access the menu bar items, press the right or left arrow key on the keyboard until the desired item is highlighted.

Legend bar

At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions.
Navigation Key(s) Function Description
<F1> or <Alt + H> <Esc> Left or Right arrow Up or Down arrow - (minus key) + (plus key) or spacebar <Enter> <Home> or <PgUp> <End> or <PgDn> <F5> <F10>
Displays the General Help screen from anywhere in the BIOS Setup Jumps to the Exit menu or returns to the main menu from a sub-menu Selects the menu item to the left or right Moves the highlight up or down between fields Scrolls backward through the values for the highlighted field Scrolls forward through the values for the highlighted field Brings up a selection menu for the highlighted field Moves the cursor to the first field Moves the cursor to the last field Resets the current screen to its Setup Defaults Saves changes and exits Setup

General help

In addition to the Item Specific Help window, the BIOS setup program also provides a General Help screen. You may launch this screen from any menu by simply pressing <F1>. The General Help screen lists the legend keys and their corresponding functions. Saving changes and exiting the Setup program See 2.7 Exit Menu for detailed information on saving changes and exiting the setup program.

System Date [xx/xx/xxxx]

Sets the system to the date that you specify (usually the current date). The format is month, day, year. Valid values for month, day, and year are Month: (1 to 12), Day: (1 to 31), Year: (up to 2084). Use the <Tab> key to move between the month, day, and year fields.
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
Installed Memory [xxx MB]
This field automatically displays the amount of conventional memory detected by the system during the boot process.
Primary and Secondary IDE Master/Slave
Primary IDE Master PIO Mode UDMA Mode Auto Acoustic Management Primary IDE Master Access Mode Capacity Cylinder Head Sector Transfer Mode [Auto] [Auto] [Disabled] [Auto] [Auto] 20021 MB 63 UDMA 5
Select Menu Item Specific Help Set a PIO Mode for the IDE device. Mode0 through 4 successive increase in performance.

PIO Mode [Auto]

This option lets you set a PIO (Programmed Input/Output) mode for the IDE device. Modes 0 through 4 provide successive increase in performance. Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]

UDMA Mode [Auto]

Ultra DMA capability allows improved transfer speeds and data integrity for compatible IDE devices. Set to [Disabled] to suppress Ultra DMA capability. Configuration options: [Disabled] [Auto]
Auto Acoustic Management [Disabled]
This option allows drive noise reduction.Configuration options: [Disabled] [Minimum] [Medium] [Maximum]
Primary IDE Master [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard disk drive is too old or too new. If the hard disk was already formatted on an older system, Setup may detect incorrect parameters. In these cases, select [Manual] to manually enter the IDE hard disk drive parameters. Refer to the next section for details. Configuration options: [None] [Auto] [Manual]
Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

Access Mode [Auto]

This item allows the user to select the sector addressing mode. CHS (cylinder, head, sector) mode supports 528 MB hard disks. LBA (logical block addressing) mode supports hard disks up to 128 GB in size. Large mode (also called extended CHS mode) supports hard disks above 528 MB in size, but does not support LBA mode. Configuration options: [CHS] [LBA] [Large] [Auto]
First, Second, Third, and Fourth SATA Master
Primary IDE Master x Auto Acoustic Management Extended IDE Drive Access Mode Capacity Cylinder Head Precomp Landing Zone Sector Disabled [Auto] [Auto] 0 MB 0
Select Menu Item Specific Help Selects the type of fixed disk connected to the system.
Extended IDE Drive [Auto]
Select [Auto] to automatically detect a SATA hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. Configuration options: [None] [Auto]
Allows the user to select the sector addressing mode. Refer to the previous page for detailed descriptions of the different modes. Configuration options: [Large] [Auto]

Advanced Menu

The Advanced menu items allow you to change the settings for the CPU and other system devices.
Take caution when changing the settings of the Advanced menu items. Incorrect field values may cause the system to malfunction.
CPU Configuration Chipset PCIPnP Onboard Device Configuration
Select Menu Item Specific Help Press Enter to Set.

CPU configuration

The items in this menu show the CPU-related information auto-detected by the BIOS.
CPU Configuration CPU Type AMD Athlon(tm) 64 Processor 3400+ CPU Speed 2222MHz Cache RAM 512K CPU Frequency [200.0]
Select Menu Item Specific Help

CPU Frequency [200.0]

Displays the frequency that the clock generator sets to the system bus and PCI bus. The BIOS auto-detects the value of this item. Configuration options: [200.0] ~ [400.0]

Chipset configuration

The items in this menu show the chipset configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.
Chipset DRAM Configuration Err94 Enh Spread Spectrum SATA Spread Spectrum PCIE Spread Spectrum
Select Menu Item Specific Help [Disabled] [Enabled] [Disabled] [Disabled] DRAM timing and control.

DRAM Configuration

The items in this sub-menu show the DRAM-related information that the BIOS auto-detects.

DRAM Configuration Max Memclock (MHz) CAS# Latency (Tcl) RAS# to CAS# delay (Trcd) Min RAS# active time (Tras) Row precharge time (Trp) [Auto] [Auto] [Auto] [Auto] [Auto]
Select Menu Item Specific Help Places an artificial memory clock limit on the system. Memory is prevented from running faster than this frequency.
Max Memclock (MHz) [Auto]
Sets the maximum operating memory clock. Configuration options: [Auto] [DDR200] [DDR266] [DDR333] [DDR400]
CAS# latency (Tcl) [Auto]
Sets the CAS# latency. Configuration options: [Auto] [2.0] [2.5] [3.0]
RAS# to CAS# delay (Trcd) [Auto]
Sets the RAS# to CAS# delay to Read/Write command on the same bank. Configuration options: [Auto] [2] [3] [4] [5] [6] [7]
Min RAS# active time (Tras) [Auto]
Sets the minimum RAS# active time. Configuration options: [Auto] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
Row precharge Time (Trp) [Auto]
Sets the Row precharge time. Configuration options: [Auto] [2] [3] [4] [5] [6]

Err94 Enh [Disabled]

Configuration options: [Auto] [Disabled]
Spread Spectrum [Enabled]
Enables or disables the clock generator spread spectrum. Configuration options: [Disabled] [Enabled]
SATA Spread Spectrum [Disabled]
Configuration options: [Disabled] [Down Spread]
PCIE Spread Spectrum [Disabled]

PCIPnP

The items in this menu show the PCIPnP configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.
PCIPnP Plug & Play O/S Init Display First Resources Controlled By x IRQ Resources PCI/VGA Palette Snoop [Yes] [PCIEx] [Auto] [Disabled]
Select Menu Item Specific Help Select Yes if you are using a Plug and Play capable system. Select No if you need the BIOS to configure non-boot devices.
** PCI Express relative items ** Maximum Payload Size [4096]

Plug & Play OS [Yes]

Select [Yes] if you are using a Plug and Play capable operating system. Select [No] if you need the BIOS to configure non-boot devices. Configuration options: [No] [Yes]
Init Display First [PCIEx]

Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI slot] [PCIEx]
Resources Controlled By [Auto]
When set to [Auto], this allows the BIOS to automatically configure all the boot and Plug and Play devices. When set to [Manual], you can assign the available IRQ resources to the PCI devices. Configuration options: [Auto] [Manual]
PCI/VGA Palette Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using standard VGA cards, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled]
Maximum Payload Size [4096]
Sets the maximum TLP payload size (in bytes) for the PCI Express devices. Configuration options: [128] [256] [512] [1024] [2048] [4096]
Onboard device configuration
The items in this menu show the onboard device configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.
Onboard Device Configuration IDE Function Setup NVRAID Configuration Onboard IEEE 1394 AC97 Audio Onboard LAN Onboard LAN Boot ROM Serial Port 1 Address Parallel Port Address Parallel Port Mode x ECP Mode Use DMA USB Configuration
[Enabled] [Enabled] [Enabled] [Disabled] [3F8/IRQ4] [378/IRQ7] [Standard] 3

IDE Function Setup

This sub-menu contains IDE function-related items. Select an item then press <Enter> to edit.
IDE Function Setup OnChip Channel0 OnChip IDE Channel1 IDE DMA transfer access Serial-ATA 2 SATA DMA transfer Serial-ATA 1 SATA2 DMA transfer IDE Prefetch Mode [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled]
OnChip IDE Channel0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller. Configuration options: [Disabled] [Enabled]
OnChip IDE Channel1 [Enabled]
Allows you to enable or disable the onchip IDE channel 1 controller. Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access. Configuration options: [Disabled] [Enabled]

Serial-ATA 2 [Enabled]

Allows you to enable or disable the Serial ATA 2 port. Configuration options: [Disabled] [Enabled]

SATA DMA transfer [Enabled]
Allows you to enable or disable the SATA DMA transfer access. Configuration options: [Disabled] [Enabled]

Serial-ATA 1 [Enabled]

Allows you to enable or disable the Serial ATA 1 port. Configuration options: [Disabled] [Enabled]
SATA2 DMA transfer [Enabled]
Allows you to enable or disable the SATA2 DMA transfer access. Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Enabled]
Allows you to enable or disable the IDE prefetch mode. Configuration options: [Disabled] [Enabled]

NVRAID Configuration

This sub-menu contains NVRAID function-related items. Select an item then press <Enter> to edit.
RAID Enable x x x x x x x x IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary Slave First SATA Master Second SATA Master Third SATA Master Fourth SATA Master RAID RAID RAID RAID RAID RAID RAID RAID [Disabled] Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled

RAID Enable [Disabled]

Enables or disables the onboard RAID controller. When Enabled, the succeeding items become user-configurable. Configuration options: [Enabled] [Disabled]
IDE Primary and Secondary Master/Slave RAID [Disabled]
Enables or disables the RAID function of the primary or secondary master or slave IDE. Configuration options: [Enabled] [Disabled]
First, Second, Third, Fourth SATA Master RAID [Disabled]
Enables or disables the RAID function of the first, second, third or fourth SATA master drive. Configuration options: [Enabled] [Disabled]
Onboard IEEE 1394 [Enabled]
Allows you to enable or disable the onboard IEEE 1394 device support. Configuration options: [Disabled] [Enabled]

AC97 Audio [Enabled]

Allows you to enable or disable the onboard AC`97 Audio controller. Configuration options: [Disabled] [Enabled]

Onboard LAN [Enabled]

Allows you to enable or disable the onboard LAN controller. Keep the default enabled if you wish to use the onboard LAN feature. Set to [Disabled] if you installed a PCI LAN card. Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN Boot ROM feature. Configuration options: [Enabled] [Disabled]

Serial Port1 Address [3F8/IRQ4]
Allows you to set the addresses for the onboard serial port connector. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Parallel Port Address [378/IRQ7]
Allows you to set the base address of the onboard parallel port connector. If you disable this field, the Parallel Port Mode and ECP DMA Select configurations are not available. Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [Standard]
Allows you to set the operation mode of the parallel port. Configuration options: [Standard] [SPP] [EPP1.7] [EPP1.9] [ECP] [ECP+EPP]

ECP Mode Use DMA [3]

Allows you to select the ECP Mode. This item becomes configurable only if the P a r a l l e l P o r t M o d e is set to [ECP+EPP]. Configuration options: [1] [3]

USB configuration

The items in this menu show the USB configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.
USB Configuration USB Controller USB 2.0 Controller USB Legacy Support [Enabled] [Enabled] [Enabled]

USB Controller [Enabled]

Allows you to enable or disable the onchip USB controller. Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller. Configuration options: [Disabled] [Enabled]
USB Legacy Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating systems (OS). Configuration options: [Disabled] [Enabled]

Power Menu

The Power menu allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity.
ACPI Suspend Type ACPI APIC Support APM Configuration Hardware Monitor

[S1&S3] [Enabled]

Select Menu Item Specific Help Select the ACPI state used for System Suspend.
ACPI Suspend Type [S1&S3]
Allows you to select the ACPI state used for system suspend. Configuration options: [S1(POS)] [S3(STR)] [S1&S3]
ACPI APIC Support [Enabled]
Allows you enable or disable the ACPI feature on the operating system. Configuration options: [Disabled] [Enabled]

APM configuration

This menu shows the Advanced Power Management (APM) configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.

PS2 Keyboard Power On [Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specific keys on the PS/2 keyboard to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
PS2 Mouse Power On [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Hardware monitor

This menu shows the hardware monitor settings auto-detected by the BIOS.

Hardware Monitor

CPU Temperature M/B Temperature 5Vsb Vccp 5V 12V CPU Fan Speed System Fan Speed CPU/System Fan Control Fan Low Temp Temperature Range Set CPU FAN RAMP RATE CPU Fan Low Voltage System Fan Low Voltage 48C 38C 4.96V 1.58V 5.12V 11.59V 3424 RPM 0 RPM [Enabled] [55oC] [13.33oC] [7 secs] [ 5.0 V] [ 5.0 V]
CPU/System Fan Control [Enabled]
Enables/disables the system fan speed control by changing the fan voltage. Configuration options: [Enabled] [Disabled]

Fan Low Temp [ 5 5o C ]

Sets the temperature level at which the system fan switches to a lower speed. Configuration options: [20C] ~ [89C]
Temperature Range [13.33o C ]
Configuration options: [2C] [2.5C] [3.33C] [4C] [5C] [6.67C] [8C] [10C] [13.33C] [16C] [20C] [26.67C] [32C] [40C] [53.33C] [80C]
Set CPU FAN RAMP RATE [7 secs]
Configuration options: [35 secs] [17.6 secs] [11.8 secs] [7 secs] [4.4 secs] [3 secs] [1.6 secs] [0.8 secs]
CPU Fan Low Voltage [5.0 V]
Allows the user to select the CPU fan voltage for slower fan speed operation. Configuration options: [5.0 V] [5.5 V] [6.0 V] [6.5 V] [7.0 V] [7.5 V] [8.0 V] [8.5 V] [9.0 V] [9.5 V] [10.0 V] [10.5 V] [11.0 V] [11.5 V] [12.0 V] [12.5 V]
System Fan Low Voltage [5.0 V]
Allows the user to select the system fan voltage for slower fan speed operation. Configuration options: [5.0 V] [5.5 V] [6.0 V] [6.5 V] [7.0 V] [7.5 V] [8.0 V] [8.5 V] [9.0 V] [9.5 V] [10.0 V] [10.5 V] [11.0 V] [11.5 V] [12.0 V] [12.5 V]
If any of the monitored items is out of range, the following error message appears: Hardware Monitor found an error. Enter Power setup menu for details. You will then be prompted to Press F1 to continue or DEL to enter SETUP.

Boot Menu

This Boot menu items allow you to change the system boot settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.
Boot Device Priority Removable Drives Hard Drisk Drives CDROM Drives Boot Settings Configuration Security
Select Menu Item Specific Help Select Boot Device Priority

Boot Device Priority

Load Setup Defaults

This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select [Yes] to load default values. Select Exit Saving Changes or make other changes before saving the values to the non-volatile RAM.

Discard Changes

This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears. Select [Yes] to discard any changes and load the previously saved values.

doc1

Asus A8NE-FM

ASUS - Innovative Solutions for a Limitless Tomorrow. ASUS is devoted to providing leading-edge technologies, and best-value solutions of the highest quality to all its customers. ASUS provides innovative technology solutions to consumer, corporate and top-tier OEM customers.
www.dooyoo.co.uk :: Computer :: Motherboard :: Asus A8NE-FM

General

Product Type Form Factor Width Depth Compatible Processors 64-bit Processors Compatibility Processor Socket Max Bus Speed Storage Controller Power Connectors Motherboard Micro ATX 24.4 cm 24.4 cm Athlon 64, Athlon 64 FX Built-in Socket MHz ATA-133, Serial ATA-150 (RAID) 4-pin ATX12V connector, 24-pin main power connector

Processor

Installed Qty (Max Supported) 0(1)

Memory

Supported RAM Technology RAM Installed ( Max ) Supported RAM Speed DDR SDRAM 0 MB / 2 GB (max) PC3200
Audio Output Audio Codec Sound Output Mode Sound card Realtek ALC655 5.1 channel surround
Copyright 2009 dooyoo GmbHww.dooyoo.co.uk w

Telecom / Networking

Networking Network adapter - Realtek RTL8201CL - Ethernet, Fast Ethernet

Expansion / Connectivity

Expansion Slot(s) Interfaces 2 memory - DIMM 184-PIN 1 x keyboard - generic - 6 pin mini-DIN (PS/2 style) 1 x mouse - generic - 6 pin mini-DIN (PS/2 style) 1 x serial - RS-232 - 9 pin D-Sub (DB-9) 1 x parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25) 4 x Hi-Speed USB - 4 PIN USB Type A 1 x IEEE 1394 (FireWire) 1 x audio - SPDIF output - RCA 1 x audio - line-In - mini-phone 3.5mm 1 x audio - line-out - mini-phone stereo 3.5 mm 1 x microphone - input - mini-phone 3.5mm

 

Tags

DCR-TRV130E Sametime Deskjet 948C Series MCM277 12 KV-29XL70K 21GX1669-78R Dungeon Hack P4T533 Roland P-55 EDD210 RH Paradox DG85 Guide MR240 PT-L6510EL DSP2024P SA-PM11 Drivermotherboard Finder DW-3 Yamaha W7 CT3451 Classic Digimax L80 Roland FC-7 GTO755 6 LP-9100 Logic RS-M205 Indesit TA5V ESC 333 PR3000 Series QG-HS850 Psma2 Kiel CD30 GK1640TK BH-213 CDX-S2010X HD6161 GR-D320EX TK 60 AT4220 Nikon D3 DB258R VP-D375W 830CF Music SA-HT400 Oslo 580 SGH-A437 DCR-HC45E Adapter MRV-T407 SU-V50 514 6 GR-D72us-gr-d72 Abit AT7 GT950 WTE1573D Q8-DM S30AW R-677 F Avhs400N 40A558p3F HRS-8 ER3660BN Asus K8V Cadillac SRX Drive Bios Specmanual MT120S MYX5-2V Temporis 42 YB-P 2000 MFC-440CN WA11VP WXI477 RDM 169 FO-5700 B2330HD 41012696 LQ-400 SN65T050EU RX-517VTN SPH-I325 PCG-Z1XMP VP-L800 Luftentfeuchter ZAN1210 Dimension 8200 Maestro 4245 DVD-5942N 4X4 LE Hands-free KIT Range Hood DPP-MS300E P4VX4 Humminbird 947C FE-150 AVR-987 Class H R-247

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101