Important Safety Instructions WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: Your amplifier is not disconnected from the mains when the Power Switch is in the OFF position. The power cord plug is the designated mains disconnect device. Mains is the official term for the electrical power source. Visually inspect the power cord plug for damage before each use. Do not use it if it appears damaged. Keep the power cord plug accessible at all times. The lightning bolt warns of the risk of shock from high voltage. Do not tamper with or attempt to open any areas where this warning is present.
The exclamation point alerts the user to an important operating or maintenance instruction.
Conforms to EU directives.
Conforms to North American standards
1. 2. 3. 4. 5. 6. 7. 8. 9.

10. 11. 12.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. No user serviceable parts. Refer all service to an authorized Epiphone Warranty Center.
Gibson Labs- A Division of Gibson Guitar 159 S. Jackson Suite 330 Seattle WA USA 98104 www.epiphone.com
Thank you for your purchase of an Epiphone Valve Series Amplifier. Your amplifier has been designed to deliver vintage quality tone through boutique design philosophies at a great value. Designed in the USA, these amplifiers reflect our century old understanding of instrument design and our unwavering commitment to high quality. Through Epiphones experience in high-end amplification products for guitar, we are proud to bring you what we believe to be the finest value in hand crafted amplifier design in a way that has never before been offered. If you have purchased your amplifier through an authorized Epiphone dealer (USA Customers Only), please be sure to register it online at www.epiphone.com or by filling out the enclosed warranty registration card and returning it to us within 30 days of your purchase.
Epiphone Valve Series: Specifications/Overview

Epiphone Valve Junior

The Epiphone Valve Junior is designed to provide Class A, true vintage tone reminiscent of classic low-wattage amplification of the 50s. Its engineering philosophies represent a great deal of commitment to providing high quality and simple operation while maintaining flexibility in tone. Its single volume knob provides a wide variety of tone extracted from its Class A architecture. At low volumes, it achieves a rich blues tone while at higher volumes it breaks up naturally, delivering clear note separation within aggressive distortion characteristics. Many recordings from infamous guitar players have been captured using nothing more than similar low-wattage amplifiers and a microphone. In fact, modern recordings often feature the Gibson Skylark/Les Paul Junior, the inspirational predecessors to the Epiphone Valve Junior. Input: (1) Jack Control: Single Volume Knob, On/Off Equalization: Provided by Volume Attenuation Wattage: 5 Watt, Class A Speaker: Special Design, Ohms , Tubes: Preamp (1) 12AX7, Power (1) EL84

Epiphone Valve Special DSP
The Epiphone Valve Special is designed to provide Class A, true vintage tone reminiscent of classic low-wattage amplification of the 50s. Its engineering philosophies represent a great deal of commitment to providing high quality and ease of operation while maintaining flexibility in tone. Similar to the Epiphone Valve Junior, the Valve Special maintains a simple overall architecture inspired by classic amplifier design and crafting but is further enhanced by modern Digital Signal Processing through 16 preset DSP selections and a separate Digital Reverb control. In addition to its DSP selections, a three band EQ and Master Volume Control provide extended tonal flexibility. Input: (1) Jack Controls: Volume, Master Volume, EQ (3 Band), DSP Mute, DSP Selector, Digital Reverb Level, On/Off, Standby Equalization: Treble, Middle and Bass Controls Wattage: 5 Watt, Class A Speaker: Special Design, Ohms , Tubes: Preamp (2) 12AX7; Power (1) EL84 DSP Mute Switch= DSP: Rotary Selector Knob with 16 DSP Selections and By Pass Switch. Reverb: Rotary Knob for Digital Reverb Level Control
Epiphone Valve Standard DSP
The Epiphone Valve Standard is designed to provide Class AB, Push-Pull, true vintage tone. Its engineering philosophies represent a great deal of commitment to providing high quality, a rich tonal palette and substantial power. Similar to the Epiphone Valve Junior and Valve Special, it maintains architecture inspired by classic amplifier design and crafting but is further enhanced by modern Digital Signal Processing through 16 preset DSP selections and a separate Digital Reverb control. In addition to its DSP selections, a three band EQ and Master Volume Control provide extended tonal flexibility. Inputs: (1) Jack Controls: Volume, Master Volume, EQ (3 Band), DSP Mute, DSP Selector, Digital Reverb Level, On/Off, Standby Equalization: Treble, Middle and Bass Controls Wattage: 15 Watt, Class AB Speaker: Special Design, Ohms , Tubes: Preamp (3) 12AX7; Power (2) EL84 DSP Mute Switch DSP: Rotary Selector Knob with 16 DSP Selections and Bypass Switch. Reverb: Rotary Knob for Digital Reverb Level Control
Page 2 Gibson Labs- A Division of Gibson Guitar 159 S. Jackson Suite 330 Seattle WA USA 98104 www.epiphone.com

Valve Junior Faceplate

Valve Junior Rear Panel

Valve Special Faceplate

Valve Special Rear Panel

Valve Standard Faceplate

Valve Standard Rear Panel
Page 3 Gibson Labs- A Division of Gibson Guitar 159 S. Jackson Suite 330 Seattle WA USA 98104 www.epiphone.com
Digital Signal Processing (Valve Special and Valve Standard)
Positions 1-4: Chorus Positions 5-8: Flanger Positions 9-16: Delay
Speaker Outputs (Rear Panel-Valve Junior, Valve Special, Valve Standard) Allow you to run the output of your amplifier to an external speaker cabinet. Rating: Valve Junior: 4 Ohms. Valve Special and Valve Standard: 8 Ohms Rear Panel Footswitch: DSP Mute (Valve Special, Valve Standard rear panel) Bypasses the 16 DSP selections The Epiphone Valve Series Footswitch comes with your Valve Series Standard. Sold separately for the Valve Special, it is available from an authorized Epiphone Dealer. Part #EPA-FSV. Power On/Off: Turns the Amplifier On or Off Standby: Leaves power to the amplifier on while bypassing output. As an all tube amplifier, your Valve Series Amplifier requires a few seconds to warm up before output arrives to the speakers. This standby switch allows you to set the output at idle, eliminating warm up time when the amp is not in use for short periods. Standby mode also helps maximize tube life.

Epiphone Limited 5 Year Warranty ________________________________________
Your new Epiphone Amplifier is warranted to be free from defects in materials and workmanship for the 5 years from the date the original retail purchaseexcluding Tubes and Speakers, which are warranted for 90 days from the original retail purchase. Both the 5 year amplifier and 90 day tube and speaker warranties are subject to the limitations contained in this warranty. If at any time during the warranty period this Epiphone instrument malfunctions as a result of faulty materials or workmanship, Epiphone will repair the defect(s) or replace the instrument, as it deems appropriate at its sole discretion. Epiphone reserves the right to use materials regularly utilized at the time of repair in the event that original materials are no longer available. If replacement of your instrument is deemed appropriate by our staff, Epiphone will replace the instrument with one of the same or most similar style of a value not in excess of the original purchase price of your instrument. In the unlikely event that your instrument is destroyed, lost or damaged beyond repair, while in the possession of Epiphone for repair, Epiphone will replace that instrument with one of the some or most similar style of a value not in excess of the original purchase price of your instrument. Any insurance covering the instrument, including but not limited to collector's value insurance, must be carried by owner at owner's expense. THIS WARRANTY IS EXTENDED TO THE ORIGINAL RETAIL PURCHASER ONLY AND MAY NOT BE TRANSFERRED OR ASSIGNED TO SUBSEQUENT OWNERS. IN ORDER TO VALIDATE YOUR WARRANTY, AND AS A CONDITION PRECEDENT TO WARRANTY COVERAGE HEREUNDER, YOU MUST RETURN YOUR WARRANTY REGISTRATION CARD WITHIN THIRTY (30) DAYS FOLLOWING THE ORIGINAL DATE OF PURCHASE. YOUR PROOF OF PURCHASE OR SALES RECEIPT MUST ACCOMPANY ALL REQUESTS FOR WARRANTY COVERAGE. This Warranty Is Subject To The Following Limitations ________________________________________ THIS WARRANTY DOES NOT COVER: 1. Any instrument that has been altered or modified in any way or upon which the serial number has been tampered with or altered. 2. Any instrument whose warranty card has been altered or upon which false information has been given. 3. Any instrument that has been damaged due to misuse, negligence, accident, or improper operation. 4. The subjective issue of tonal characteristics. 5. Shipping damages of any kind. 6. Any instrument that has been subjected to extremes of humidity or temperature. 7. Normal wear and tear (i.e; worn tolex, speaker and tube wear/damage, worn plating, or damages to or discoloration of the instrument finish for any reason). 8. Any instrument that has been purchased from an unauthorized dealer, or upon which unauthorized repair or service has been performed. 9. Any factory-installed electronics after a period of one (1) year following the original date of purchase. EPIPHONE MAKES NO OTHER EXPRESS WARRANTY OF ANY KIND WHATSOEVER. ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, EXCEEDING THE SPECIFIC PROVISIONS OF THIS WARRANTY ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS WARRANTY. SOME STATES AND/OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES SO THAT THE ABOVE MAY NOT APPLY TO YOU. EPIPHONE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT CONSEQUENTIAL, INCIDENTAL OR OTHER SIMILAR DAMAGES SUFFERED BY THE PURCHASER OR ANY THIRD PARTY, INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR BUSINESS OR DAMAGES RESULTING FROM USE OR PERFORMANCE OF THE INSTRUMENT, WHETHER IN CONTRACT OR IN TORT, EVEN IF EPIPHONE OR ITS AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EPIPHONE SHALL NOT BE LIABLE FOR ANY EXPENSES, CLAIMS, OR SUITS ARISING OUT OF OR RELATING TO ANY OF THE FOREGOING. **Customers who purchased product outside the U.S should contact their local distributor for the handling and resolution of all warranty issues as the above-described Epiphone Amplifier Warranty is not applicable. For a list of distributors outside of the US, visit www.epiphone.com