Product environmental attributes THE ECO DECLARATION
Brand * Company name * Contact information * Internet site * Additional information Hewlett-Packard Hewlett-Packard Company Hans Wendschlag http://www.hp.com/hpinfo/globalcitizenship/environment/contactemail.html http://www.hp.com/hpinfo/globalcitizenship/environment/ Logo
The company declares (based on product specification or test results based obtained from sample testing), that the product conforms to the statements given in this declaration.
Type of product * Commercial name * Model number * Issue date *
Intended market * Additional information
Scanner HP Scanjet G2710 Flatbed Scanner L2696A June 2009 Global Europe Japan U.S. Other Latin America
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version. The declaration may be published only when all rows and/or fields marked with a * are filled-in (n.a. for not applicable).
Quality Control Item Additional information regarding each item may be found under P14. QC1 * QC2 * The company enforces an internal quality control scheme to ensure the correctness of this eco declaration The company is a member of an eco declaration system that enforces regular independent quality control such as organized by IT-Fretagen (see http://www.itforetagen.se).

Requirement met Yes No

Annex B of ECMA-370 2nd Edition, December 2006

Page 1 (5)

Model number * Issue date *

L2696A June 2009

Product environmental attributes - Legal requirements Item P1 P1.1* P1.2* P1.3* *=mandatory to fill in. Additional information regarding each item may be found under P14. Hazardous substances and preparations Products do not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) as specified in EU 2002/95/EC and its amendments Products do not contain Asbestos (EU 76/769/EEC, amendment 1999/77/EC) Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC), hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1-trichloroethane, methyl bromide (EU : Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000) Products do not contain polychlorinated biphenyl (PCB), polychlorinated terphenyl (PCT), (EU 76/769/EEC)
Requirement met Yes No n.a.

P1.4* P1.5*

Products do not contain short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the chain containing at least 48% per mass of chlorine in the SCCP as specified in Norwegian regulation relating to restrictions on the use of certain dangerous chemicals 20.12.2002 Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS), Tris(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (EU 76/769/EEC) Textile and leather parts with direct skin contact do not contain Azo colourants that split aromatic amines as specified in EU 76/769/EEC, amendment 2003/3/EC Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as pentachlorophenol and derivatives (EU 76/769/EEC) Parts with direct and prolonged skin contact do not release nickel in concentrations higher than specified in 76/769/EEC, amendment 94/27/EEC Batteries If hazardous batteries (as defined in 91/157/EEC) are used in the product they are easily removable and labelled with the disposal and the substance logo (as defined in 91/157/EEC, 93/86/EEC) If batteries are used in the product they do not contain mercury in concentrations higher than specified in 91/157/EEC If batteries are permanently installed in the product, information on the environmentally hazardous substances and safe removal method is listed in the user manual (91/157/EEC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC / 2004/108/EEC th after June, If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked and a Declaration of Conformity is available (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium in concentrations higher than specified in (76/769/EEC and 91/338/EEC) If ink/toner is used in the product, it does not contain cadmium in concentrations higher than specified in (76/769/EEC and 91/338/EEC) If the ink/toner formulation/preparation is classified as hazardous according to EU Directive 1999/45/EC, and as amended, the product/packaging is labelled and a Material Safety Data Sheet (MSDS) in accordance with (99/45/EC & 2001/58/EC) is available. Product packaging The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0,01% by weight (94/62/EC). Plastic packaging material is marked according to ISO 11469 referring ISO 1043.(97/129/EEC) The product packaging material is free from CFC/HCFC. Treatment information Information for recyclers/treatment facilities (e.g. as requested by 2002/96/EC) is available.

P1.6* P1.7* P1.8* P1.9* P2 P2.1* P2.2* P2.3* P3 P3.1* P3.2* P3.3* P3.4* P4 P4.1* P4.2* P4.3*
P5 P5.1* P5.2* P5.3* P6 P6.1*

Page 2 (5)

Product environmental attributes - Market requirements - Environmental conscious design Item *=mandatory to fill in. Additional information regarding each item may be found under P14. P7 Design, Disassembly, recycling P7.1* Parts that have to be treated separately are easily separable P7.2* P7.3* P7.4* P7.5 P7.6* P7.7* P7.8* P7.9. P7.10 P7.11* P7.12* P7.13* P7.14 P7.15 P7.16 P7.17 P7.18 P7.19 P7.20 P8 P8.1* P8.2* P8.3 P9 9.1 Mode On-max Onnormal On-idle Save 1 Save 2 Off 1 Off 2 No load TEC P9.2* P9.3 * * * * * Plastic materials in covers/housing have no surface coating. Plastic parts >100g consist of one material or of easily separable materials. Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043. Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools. Labels are easily separable. (This requirement does not apply to safety/regulatory labels). Product lifetime Upgrading can be done e.g. with processor, memory, cards or drives Upgrading can be done using commonly available tools Spare parts are available after end of production for: 3 years Service is available after end of production for: 3 years Material and substance requirements Product cover/housing material type: Material type: HIPS Material type: SAN Electrical cable insulation material of power cables are halogen free (including PVC) Electrical cable insulation material of signal cables are halogen free (including PVC) All cover/housing plastic parts >25g are halogen free All printed circuit boards (without components) >25g are halogen free Chemical specifications of flame retardants in cover / housing plastic parts >25g according ISO 1043-4:

Material type:

Chemical specifications of flame retardants in printed circuit boards (without components) >25g according ISO 1043-4: Weight of recycled material in plastic parts is 0.0 Plastic parts >25g are free from flame retardant substances/preparations above 0.1% classified as R45/46, R50/51/53 and R60/61 (67/548/EEC) Light sources are free from mercury If mercury is used specify: Number of lamps: 2 and max. mercury content per lamp: 2.0 mg Batteries Product does not contain batteries defined as hazardous according to 91/157/EEC Battery chemical composition: Batteries meet the requirements of the following voluntary program/s: Energy consumption For the product the following power levels or energy consumptions have been measured: Power level at Time (s) to <mode> Mode description * Volts W W W W W W W W to to to to to to * * * * * * * External power supplies/charger plugged in but disconnected from the product

Reference/ Standard * * * * * * * * *
kWh/y Typical Energy Consumption per year
Information about the energy save function is provided with the product. The product meets the energy requirements of the following voluntary program/s: ENERGY STAR MOU Others specify:

Page 3 (5)

Product environmental attributes - Market requirements (continued) Requirement met Item * = mandatory to fill in. Additional information regarding each item may be found under P14. Yes No n.a. P10 Emissions Noise emission Declared according to ISO 9296 Mode Mode description Declared P10.1 Declared A-weighted A-weighted sound pressure level LpAm (dB) sound power Bystander positions Operator position level LWAd (B) Desktop or Deskside Idle Operation Other mode Measured according to: P10.2 ISO 7779 Other ECMA-74 (only if not covered by ECMA-74 with LpAm measurement distance m) * idle * color 300dpi scan * 2.4 * 5.3 20.2 39.4 (only if product is not operator attended)
The product meets the acoustic noise requirements of the following voluntary program/s: Chemical emissions from printing products

P10.3*

Test performed according to ECMA-328 standard The test covers: Dust Ozone
, other specify: Styrene Benzene TVOC
The product meets the chemical emission requirements of the following voluntary program/s: Electromagnetic emissions
P10.5 P11 P11.1* P11.2* P11.3* P12 P12.1* P12.2* P12.3* P13 P13.1* P13.2* P13.3* P13.4* P14
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary program/s: Consumable materials for printing products A Material Safety Data Sheet (MSDS) is available for the ink/toner preparation, even if not legally required (see P4.3). Paper containing recycled fibres that meets the requirements of EN12281 can be used. 2-sided (duplex) printing/copying is an integrated product function. Ergonomics for computing products The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241-9. Packaging and documentation Product packaging material type(s): corrugated Product packaging material type(s): molded pulp Product packaging material type(s): LDPE Product plastic packaging is halogen free (including PVC) User and product documentation do not contain chlorine bleached paper User and product documentation contain recycled paper Additional information weight (kg): 0.37 weight (kg): 0.18 weight (kg): 0.013

Page 4 (5)

Energy consumption
For the product the following power levels or energy consumptions have been measured:

Power 1 Consumption (W)

Default Time Settings to Enter Energy Saving Mode (Min)
Reference Standard (test method)

Operating

Not Applicable
IEC 62301: Household electrical appliances Measurement of standby 2 power (Ver. 1.0) ENERGY STAR Product for Imaging products (Ver. 1.1) ENERGY STAR Product for Imaging products (Ver. 1.1) ENERGY STAR Product for Imaging products (Ver. 1.1) ENERGY STAR Program for External Power Supplies (Ver. 2.0)
Ready Sleep Off External Power Supply At No Load

2.6 0.27 0.27

Immediately after Operating mode ends
Not Applicable Not Applicable

1. 2. 3.

Reported power is the highest level for all standard voltages this product series/model is sold at worldwide. Uses all basic test conditions and methods established by this standard procedure and adapts them to measuring this power mode. However, this procedure does not specify measurement of this power mode. Definitions: a. Operating: The power state in which the product is connected to a power source and is actively transferring data, as well as performing any of its other primary functions. b. Ready: The condition that exists when the product is not producing output, has reached operating conditions, has not yet entered into any lower-power modes, and can enter Active mode with minimal delay. All product features can be enabled in this mode, and the product must be able to return to Active mode by responding to any potential input options designed into the product. Potential inputs include external electrical stimulus (e.g., network stimulus, fax call, or remote control) and direct physical intervention (e.g., activating a physical switch or button). c. Sleep: The reduced power state that the product enters automatically after a period of inactivity. In addition to entering Sleep automatically, the product may also enter this mode 1) at a user set time-of-day, 2) immediately in response to user manual action, without actually turning off, or 3) through other, automatically-achieved ways that are related to user behaviour. All product features can be enabled in this mode and the product must be able to enter Active mode by responding to any potential input options designed into the product; however, there may be a delay. Potential inputs include external electrical stimulus (e.g., network stimulus, fax call, remote control) and direct physical intervention (e.g., activating a physical switch or button). The product must maintain network connectivity while in Sleep, waking up only as necessary. d. Off: The power state that the product enters when it has been manually or automatically switched off but is still plugged in and connected to the mains. This mode is exited when stimulated by an input, such as a manual power switch or clock timer to bring the unit into Ready mode. When this state is resultant from a manual intervention by a user, it is often referred to as Manual Off, and when it is resultant from an automatic or predetermined stimuli (e.g., a delay time or clock), it is often referred to as Auto-off. e. EPS No-Load: The condition in which the input of a power supply is connected to an AC source consistent with the power supplys nameplate AC voltage, but the output is not connected to a product or any other load.

Yes P9.2* P9.3 Information about the energy save functions is provided with the product. The following product models qualify to the following voluntary programs: ENERGY STAR Imaging Equipment Program (Version 1.1): L2696A
NOTE: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and hitting the [Enter] key.

Page 5 (5)