TT129-SBH | Removable Air Vent Mount for TomTom GPS
GN047-SBH Air Vent Mount with Swivel Ball Head APTTGO520 Adapter plate for TomTom GO x20, x30

Check Compatibility

Package Contents: (1) GN047-SBH Air Vent Mount with Swivel Ball Head (1) APTTO - Adapter plate for TomTom ONE Series (1) APTTOXL - Adapter plate for TomTom ONE XL and XL S Series (1) APTTGO520 - Adapter plate for TomTom GO Series (1) APTTEP - Adapter plate for TomTom EasyPort pattern (1) APTTSE - Adapter plate for TomTom Start and Ease
APTTO Adapter plate for TomTom ONE APTTEP Adapter Plate for EasyPort
Check Compatibility Check Compatibility
TomTom Device Compatibility:
TomTom ONE 125 125-SE (TomTom EasyPort Mount) TomTom ONE 130, ONE 130-S (TomTom EasyPort Mount) TomTom ONE 140, ONE 140-S (TomTom EasyPort Mount) TomTom XL 325, XL 325-S, XL 325-SE (TomTom EasyPort Mount) TomTom XL 330, XL 330-S (TomTom EasyPort Mount) TomTom XL 335 Series (TomTom EasyPort Mount) TomTom XL 340, XL 340-S, XL 340 LIVE Series (TomTom EasyPort Mount) TomTom XL 350 Series (TomTom EasyPort Mount) TomTom XXL 530-S, XXL 535-T, XXL 540-S/WTE, XXL 550 Series (TomTom EasyPort Mount) TomTom ONE (US Edition, US 3rd Edition) TomTom ONE XL (1st Edition) - TomTom ONE XL-S (1st Edition) TomTom ONE 22, ONE 22 Regional, ONE 22 Regional Trac TomTom XL 22, XL 22 Regional (TomTom EasyPort Mount) TomTom ONE UK / EUROPE (NEW Edition aka 2nd Edition, 3rd Edition) TomTom GO 520 / 530 / 630 / 720 / 730 / 920 / 920T / 930 TomTom Start and Ease
TomTom, ONE, GO, and EasyPort, Start and Ease are product names, trademarks, or registered trademarks of TomTom International NV. Arkon Resources, Inc. is not aliated with TomTom International b.v.
APTTOXL Adapter plate for TomTom ONE XL and XL S
APTTSE Adapter Plate for TomTom Start & Ease
Air Vent Mount Assembly Step 1. Attach the vent mounting clips (A) to the back of the pedestal (B) with the vent clips positioned with the at sides facing up.
TomTom GO Adapter Plate Installation
Step 1. Attach the adapter plate by sliding it up into the slot on the back of the TomTom GO 520, 530, 630, 720, 730, 920, 920T, and 930 models device as shown below.
TomTom ONE, ONE XL, and ONE XL S Plate Installation
Step 1. Slide the adapter plate up into the grooves on the back of the TomTom ONE, ONE XL, or ONE XL S.

Step 2.

Attach the device with adapter plate to the mount as shown in the diagram above.
TomTom EasyPort Adapter Plate Installation Step 1. Connect the dual T-slots (A) on adapter plate to the dual T-tabs
(B) on the pedestal head. Adjust the angle of the head by tightening the head adjustment knob (C).
Continued on next column.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road.

Continued on next page.

Safety Precautions Follow all manufacturer safety guidelines for operating your device. Failure to practice safe usage of GPS device while driving may result in damage, injury, or death. Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists Consumer Hotline: USA (800) 841-0884 INTL (626) 254-9005 Monday - Friday 9 am - 5 pm, PST www.arkon.com Arcadia, CA 91006 USA Designed in USA | Made in China Copyright 2010 Arkon Resources, Inc.

TomTom EasyPort Device Insertion
Step 2. While holding the mounted adapter plate, gently insert the device (not included, sold separately) into the adapter plate until an audible click is heard. The device can then be rotated into the desired viewing angle.
Attaching a TomTom Device to Pedestal Step 3. While holding the mounted TomTom adapter plate, gently insert the TomTom device (not included, sold separately) into the adapter plate until an audible click is heard.
Attach Device or Cradle to Air Vent Mount Step 1. Attach your cradle or device (not included, sold separately) to the dual-T head by inserting the dual-T tabs (F) into the dual-T slots (G) on the back of the cradle or device.
Insertion of Mount Assembly into Air Vent Step 2. Pinch the vent mounting clips (H) so that the teeth open and gently insert vent pedestal into vent louvres until the mounting clips are attached to the n/blade of the vent. Adjust the support leg (I) vertically until it rests rmly along the bottom of the vent or dash surface below the vent.

TTEP112 | Friction Dashboard Mount for TomTom EasyPort
Package Contents: (1) CM012 - Weighted friction style dashboard mount (1) GN014-SBH - Suction pedestal with swivel ball head ((1) APTTEP - Adapter plate for TomTom EasyPort Series (1) Optional adhesive safety hook (recommended but not required) (1) Alcohol cleaning pad
TomTom Device Compatibility:
APTTEP Adapter Plate for TomTom EasyPort Compatible with: TomTom ONE 125, 125-SE TomTom ONE 130, ONE 130-S TomTom ONE 140, ONE 140-S TomTom XL 325, XL 325-S, XL 325-SE TomTom XL 330, XL 330-S TomTom XL 335 Series TomTom XL 340, XL 340-S, XL 340 LIVE Series TomTom XL 350 Series TomTom XXL 530-S, XXL 535-T, XXL 540-S/WTE, XXL 550 Series TomTom PRO 4000, TomTom PRO 8000 TomTom ONE 22, ONE 22 Europe, ONE Europe 22 Assist, TomTom ONE Regional, ONE Regional Assist TomTom Europe 22, XL Regional Assist, XL Europe 22 Trac TomTom XL Regional, TomTom XL Regional Trac
TomTom and EasyPort are product names, trademarks, or registered trademarks of TomTom International b.v. Arkon Resources, Inc. is not aliated with TomTom International b.v.

Pate Pending Patent

CM012 with GN014-SBH Friction Style Dashboard Mount with Pedestal

Adhesive Safety Hook

Dashboard Mount Installation Step 1. Find a safe location on the vehicle dashboard that is not in an airbag deployment zone.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road.

Step 2.

Optional Safety hook installation will add extra stability. Clean the desired area with the included alcohol pad and let dry. Remove the adhesive backing on the safety anchor. The hook on the anchor must point towards the windshield. Press and hold the hook down on to the dashboard surface for about a minute. Allow 24 hrs. to cure to the dashboard surface at room temperature (72 F.)

Step 4.

Remove protective lm from pedestal mounting surface (A). Lower the pedestal onto the disc and press down rmly. Flip the locking lever down to secure the pedestal to the dash mount.

Hook towards windshield

Step 3.
Place the loop on the back of the dashboard mount around the safety hook and place on the dashboard in front of the hook.

Continued on other side.

Safety Precautions Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment. Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists Consumer Hotline: USA (800) 841-0884 INTL (626) 254-9005 Monday - Friday 9 am - 5 pm, PST www.arkon.com Arcadia, CA 91006 USA Designed in USA | Made in China Copyright 2010 Arkon Resources, Inc.
Dashboard Mount Installation - Continued Step 5. Adjust the angle of the pedestal arm by tightening the rotation knob. TomTom EasyPort Device Installation - Pedestal Attachment Step 1.
While holding the mounted adapter plate, gently insert the device (not included, sold separately) into the adapter plate until an audible click is heard. The device can then be rotated to the desired viewing angle.

Angle Knob

Step 6.
Adjust the angle of the pedestal head by tightening the head adjustment knob.
TomTom EasyPort Adapter Plate Installation
Step 1. Attach the adapter plate to the pedestal by inserting the
dual T-Tabs of the pedestal into the T-slots of the adapter plate. Readjust angle knobs if necessary.