A convenient beverage cooler (above left) keep your drinks cold. Provide power to your cell phone, computer, or other accessories with this handy three-prong outlet. Keep your devices powered up, even with the tractor key turned off (included with optional Deluxe Cab). The exclusive John Deere ActiveSeat option (left) isolates you from up to 90percent of the vertical seat movement. This industry-best seat lets you work at fast speeds, with greater comfort, and less fatigue (leather ActiveSeat option shown above). Step up and to an unprecedented level of comfort with the impressive John Deere CommandView cab.
Enjoy first-class comfort and convenience that helps reduce operator fatigue during those long days in the field.

Easy-to-use controls

Maximize your productivity with easy-to-use fingertip controls
Inside the spacious cab, displays and controls surround you, putting everything you need within easy reach and close view. The exclusive CommandARM console places vital tractor controls at your fingertips. The Automatic PowerShift, AutoTrac resume switch, engine throttle, speed control lever, hydraulic SCV controls, 3-point hitch, and IMS sequence switch, are all push-button easy. The updated CommandCenter LCD screen lets you monitor and customize more than 20 different tractor functions such as percent slip, gallons-per-hour, acres per hour, time-to-empty and more. Plus, you can change or adjust tractor performance settings for the PowerShift, IVT, or rear PTO. Change backlighting options orlanguage settings to best fit your operation. Its an unprecedented level of in-cab convenience that can maximize your productivity.
Whether youre an experienced operator, or a first-timer, driving the 8030 Series is hassle-free.
Total tractor control thats within easy reach, close view
1. Illuminated monitor, located on the righthand ROPS cornerpost, displays fuel level, temperature, oil pressure, engine speed, gear selection, ground speed, plus stopengine and warning alerts. 2. GreenStar-Ready wiring harness and implement connector (ISO compatible). 3. ISO Radar connector. 4. Electrohydraulic SCVs and 3-point hitch controls. A fifth SCV is available as a fieldinstalled option. 5. The exclusive CommandARM console can be raised or lowered tofine-tune comfort. You get fingertip control of tractor hydraulics, throttle, gear selection, rear hitch, and more. 6. The CommandCenter LCD display provides service andinformation alerts. Easily track engine, transmission, electrical, and hydraulic systems. Program tractor performance settings, orset it to display readings in multiple languages. 7. Exclusive Implement Management System (IMS) lets you operate multiple tractor functions simultaneously. There are two sequence buttons that provide up to 20 learned commands. 8. Industry-leading, exclusiveTouchSet hydraulic controls letyou adjust flow and timed-rate detents foreachindividual hydraulic coupler. Make adjustments from the seat and on-the-go for increasedproductivity. 9. Service Advisor connector lets service technicians plug in computers and use ServiceADVISOR to quickly diagnose and solve problems, to keep your investment up and running. 10.Heating, cooling, extremity lighting, and wipers can also be managed from the righthandconsole.

Note: Fuel-economy boost based on factory-observed and calculated data. Comparison based on 8020 Series with Automatic PowerShift Transmission. IVT is base equipment on 8530; not available on 8030T Series Track Tractors.
The IVT helps boost fuel economy 3 to 15 percent depending on the application and operating mode selected.
IVT Mode Selector Choose Position 1 for PTO work, and Position 2 for heavy draft applications. Select Position 3 for light tillage, planting, or transport. All positions help minimize fuel consumption automatically in any application.
Left hand or right hand reverser IVT control the power of choice is yours.
Exclusive Automatic PowerShift helps improve fuel efficiency and productivity inmost applications by making shifts automatically to match changing conditions.
PowerShift lever is located within easy reach on the CommandARM.
The refined PowerShift works with other tractor systems to help boost fuel economy* by nearly nine percent.
*Compared to its predecessor.
12 Ag Management Solutions
Boost your profit and productivity with John Deere Ag Management Solutions

Signal accuracy options

The StarFire network provides unparalleled signal reliability: SF1 FREE, pass-to-pass accuracy of about 1 foot SF2 pass-to-pass accuracy of +/- 4 inches StarFire RTK Real-time kinematics with +/- 1-inch accuracy
Note: SF1 and SFminutes pass-to-pass, 95 percent of the time. RTK 1-inch within 12 miles of base station and 68 percent of the time.
Make every pass more productivewith integrated guidance fromJohn Deere Ag ManagementSolutions. Start with Parallel Tracking and the free, SF1 signal. This hands-on system lets you reduce overlap and is ideal for broad-acre tillage, seeding, and spraying. When you demand greater accuracy, upgrade to AutoTrac hands-free assisted steering, and the SF2 signal. Enjoy pass-bypass accuracy of +/- 4 inches. AutoTrac lets you work at faster speeds so you finish more acres inless time. Plus, by minimizing implementoverlap, you candecrease fuel, seed, fertilizer, and chemicalcosts. Best of all you can move your John Deere guidance system from your tractor to other machines. And for model year 2008, all MFWD 8030 Series Tractors are AutoTrac-Ready! Simply plug in your GreenStar display and StarFire receiver.
GreenStar guidance advantages
Parallel Tracking Reduces implement overlap Improves efficiency saves time, chemicals, and fuel Adjusts for satellite drift, forprecise applications Can use oncontours andwithall three signal accuracyoptions AutoTrac Reduces overlap and drives down input costs Increases field operating speeds Can help increase yields with more accurate seed, fertilizer, and chemical placement Improves efficiency by maximizing full width ofimplement Reduces operator fatigue, boosts operator comfort RTK Most accurate guidance signal Reduces operator fatigue, boosts operator comfort Precise placement of seed, chemicals, andfertilizer Enhances efficiency Repeatable sub-inch accuracy

Available with touch-screen navigation
GreenStar Apex Farm Management Software gives you more flexibility, regardless of your cropping practices. Apex goes beyond downloading GreenStar data; it also directly unloads data from third party systems and has a robust ability to import data like soiltype maps from other software packages.
John Deere guidance systems can help you cut fuel, fertilizer, seed, and chemical costs.
You can plug in a USB-compatible keyboard to your new GreenStar2 display for easier data entry. GreenStar StarFire iTC receiver is available in two configurations: WAAS/SF1 only, or SF2 Ready.
Field Doc Data Collection Software can turn your tractor into an information gathering machine. Working with your StarFire receiver andGreenStar monitor, this GPS-based software simplifies data collection record field and weather conditions, tillage practices, seed varieties, and field boundaries.
The original GreenStar system provides an affordable option for guidance andfield documentationapplications.
Optional push-button navigation
GreenStar 2600 display features touch-screen navigation. It comes pre-loaded with a wide array of programs. Plus it can work as your tractors performance monitor. Use it to control SeedStar planter and air-cart functions, AccuDepth on select tillage tools, and GS2 Rate Controller with Swath Control Pro. This consolidates bulky monitors into just one!
14 Improved hydraulic systems
Increase your efficiency with high -capacity, quick-response hydraulics
Standard/Optional Hydraulic Flow
Wheels 8130 to gpm is standard 8130 to gpm is optional 8430, gpm is standard Tracks 8230T to 8430T 33.5 gpm is standard 8230T to 8430T 42 gpm is optional
Improved hydraulic systems
John Deere took a reliable hydraulic system and made it evenbetter on the 8030 Series. These improvements provide greater hydraulic flow even at lower engine rpm. The integrated hydraulic system also boasts fewer parts, fewer connections, and shorter hydraulic lines that enhance reliability. And there is plenty of reserve hydraulic capacity (up to 60percent more oil) to operate single-acting cylinders especially helpful ifyou operate large dump carts, forage boxes, or sugarcane carts. Steering and hydraulics are extremely responsive. And only John Deere offers TouchSet hydraulic control. Its especially beneficial if you use air seeders or vacuum-type planters. And as itsname implies, you can simply touch and set hydraulic flow to individual SCVs on-the-go right from your seat.

PTO engagements are automatically modulated for smooth starts. This protects your implement from high-torque overloads. Special PTO brake ensures equally smooth, uniform stops. Ideal for unloading grain, harvesting beets.
Equipment size continues to grow and so does tractor horsepower. Thats why weve added extra muscle to the 8030 Series rear hitch and drawbar. An industry-first, Cat 4N/3 rear hitch provides up to a maximum 18,300 lb. hitch-lift capacity that lets you take full advantage of the increased power levels of the 8030 Series. Its ideal for pulling large 12-row hipper/bedders, or strip-till rigs. A rugged Cat 4 drawbar with a 2-inch hitch pin and optional 11,000 lb. tongueweight capacity provides added load-bearing strength tohandle grain carts, widechisel plows, or wide planters. Your John Deere dealer canmake sure your new 8030 Series Tractor comes with the right hitch for your operation.
Built-in PTO power is one more way the 8030 Series helps youget the most from your equipment investment dollar.
Hitch Slip Command lets you set hitch sensitivity to react relative to wheel slip. The result is more uniform hitch performance (radar required).
Convertible Cat 4N/3 rear hitch is designed for quick conversion. Asimple change of the lower and upper hook is all thats required.
Take advantage of the 8530s power with its heavy-duty Cat 4N/3 rear hitch or the 8530s and 8430s Cat 4 drawbar.

18 Axle choices

Choose from four front-axle options to best match your operation
MFWD with ILS MFWD 1300 Series

Axle choices

Put more power to the ground. You can with an 8030 Series Tractor equipped with mechanical front-wheel-drive (MFWD) and exclusive front Independent Link Suspension (ILS). Independent research* proves ILS with front duals can boost productivity by 10 percent in primary and secondary tillage applications. That means you canfinish more acres in less time. And because of its smooth operation, ILS can reduce wear and tear on your tractor, and can lower your ownership costs throughout the life of the machine. ILS is standard equipment onthe 8430 and 8530 optionalonother 8030 Series WheeledTractors.

*Research conducted at the Ag Tech Centre, Lethbridge, Alberta. Comparison made to the same rigid-beam axle, MFWD tractor without ILS and front duals.

MFWD 1500 Series

The 1500 Series MFWD lets you add duals to your front axle for added load-carrying capacity, traction, and flotation.
John Deere MFWD Axle Comparison Feature Hydraulic Differential Lock Limited Slip Suspension You get an industry best 10 inches of suspension travel that provides a super-smooth ride. This helps put more tractor power to the ground so you can work at faster speeds with less operator fatigue. 1300 Series No Yes No 5 No 60 to 88 in. 26 mph 1500 Series Yes No No 4 or 5 Yes 60 to 144 in. 26 mph ILS Yes No Yes 4 or 5 Yes 60 to 132 in. 26 or 31 mph
John Deere MFWD gives you more drawbar pulling power in alloperating conditions for higher levels of productivity. Plus, MFWD provides increased traction with lower tractor ballast. This minimizes soil compaction and helps increase fuel efficiency. The 1300 Series MFWD is standard on the 8230 and 8330, optional on the 8130 and 8430. The 1500 Series MFWD is optional on all five models. The five-degree caster angle of the 1300 Series MFWD axle lets you make tight turns, even with narrow 60-in. tread spacings. A high-pivot-point axle mounting allows the front axle tooscillate nine degrees before contacting the axle stops. This helps the wheels maintain better ground contact. All John Deere MFWD axles have electrohydraulic, automatic engagement. Plus, you can manually engage or disengage the MFWD on the goif needed.
ILS puts more power to the ground and lets you work moreacres per day with enhanced operator comfort.
The 2-Wheel-Drive 8130 isan economical alternative for applications that do not require a powered front axle.
Tire Ratio / Steps Allowed Duals Tread Spacing Top Speed
Multiple axle choices ensure you get just the right tractor tobest match your equipment.

20Track tractors

Consider 8030T Series Track Tractors for outstanding flotation and traction
When you need maximum flotation and traction its tough to beat a John Deere 8030T Series Track Tractor. Choose from three models that deliver the same level ofquality and dependability youdexpect from 8030 Series Wheeled Tractors. You get all of the benefits of the same PowerTech Plus 9.0 L engine, updated cab, and refined 16speed PowerShift. Plus you can expect a smooth ride across rough fields, along with outstanding flotation and superb ground-gripping traction. Optional features include theDeluxe CommandView cab, ComfortCommand seat, and Deluxe Comfort package. In addition, all 8030T Series Track Tractors come from the factory AutoTrac-Ready, at no extra charge. Add the GreenStar guidance system of your choice and youre ready toreap the rewards of precisionagriculture.

Long-lasting Camoplast track belts are available in 16-, 18-, 25-, and 30-inch widths. Choose the Durabuilt 3500 Series for general ag work or the 5500 Series for extreme conditions. Available for 8030T Series Track Tractors. Handle your fall tillage chores with ease thanks to a standard Cat 3/3N 3-point rear hitch capable of lifting up to 15,200 pounds. A heavy-duty Cat 4 drawbar is available for all 8030T Series Track Tractors (standard on the 8430T).
John Deere gives you the power of choice wheels ortracks.

22Row-crop systems

From planting through harvest, 8030 Series Tractors can do it all
Reliable 8030 Series Tractors were born to work in row-crop applications like your corn and soybeanfields. In the fall, youll appreciate thespeed-matching capabilities ofthe8530 with an Infinitely Variable Transmission (IVT) as itpulls your grain cart alongside your combine. Plus, you getplenty of PTO power to unloadgrain quickly and efficiently. After harvest, add a JohnDeere 512 Disk Ripper or 2700 Mulch Ripper to easily size and bury heavy crop residue. In the spring, you can prepare exceptional seedbeds with a 2210Field Cultivator equipped with AccuDepth. You get precise, incremental depth control that conserves soil moisture, and helps you save fuel. Then you can plant next years corn crop with aJohn Deere 1790 Planter. From start to finish, its a complete cornand soybean system allfrom John Deere.
For the ultimate seedbed, hitch onto a John Deere 2210 Field Cultivator and youre on the way to higher potential yields.
If you grow corn or soybeans youll appreciate the power and versatility of the 8030 Series.
No-till? No problem. Use the John Deere 1770NT Planter to plant and fertilize nextyears crop in onefuel-saving pass.
Dependable 8030 Series Tractors have plenty of muscle to pull wide tillage tools like this John Deere 637 Disk.
(Above) Get the most from every pass with GreenStar AutoTrac or Parallel Tracking guidance systems. You can minimize implement overlap and drive down input costs such as fuel, seed, fertilizer, and chemicals.

Tow your grain wagons to the elevator in style with an 8030 Series Tractor with IVT. You get outstanding comfort, control, and fuel efficiency. (See pages 10-11.)

24Row-crop systems

You get plenty of muscle to lift beets, extra finesse to plant cotton
Sometimes you just need a little more power to finish the job quickly and efficiently. Intelligent Power Management is an option that automatically provides up to an extra 35 engine horsepower in mobile*, rear PTO applications, and at transport speed** when full-rated power isnt quite enough. This option is available on all new 8030 Series Tractors (unavailable for tracks).
*Note: Mobile rear PTO applications. The tractor must be moving. The PTO system must detect a load. **Transport where speeds reach in excess of 14.2 mph. The modulation of power begins at 9 mph. See your dealer for details.
If you grow cotton, sugarbeets, orpotatoes, the 8030 Series hasthe extra muscle and finesse youre sure to appreciate. For PTO applications such as beet harvesting youll appreciate the Infinitely Variable Transmission (IVT). In automatic mode, PTO speed remains constant and fuel efficiency is improved. Youll also notice that the loading of the gathering chains ismore consistent because youcan dial in the exact ground speed required to do the job based on the conditions at hand. This keeps your harvester operating atpeak levels in all conditions. Maximum hitch-lift capacity is18,300 pounds. And with the Cat 4N/3 rear hitch, you can lift heavy potato planters or strip-till rigs with ease. Its power, performance, and versatility that can help you easily adapt to todays larger row-crop implements.
Shredding cotton stalks isquick and easy when you hitch a John Deere rotary cutter on behind your reliable 8030 Series Tractor.
The 8030 Series features builtin reliability and efficiency that can enhance your productivity and drive down input costs.
Harvest your beets with anew 8030 Series Tractor with an IVT, and take advantage of creeper speeds as low as.03 mph and super-smooth shifts.
Expect worldclass service from your John Deere dealer before and after the sale.
Attach a John Deere Scraper like this 1512E Fixed-Blade Ejector and make precision land-leveling and surface water management jobs go smoother than ever.

26Small grain systems

Small grains. big tractors vers atile enough for seeding, tillage, and hauling
John Deere gives you three great tractor options for your small-grain operation: 8030 Series MFWD Tractor with the 16-speed PowerShift Transmission 8030 Series MFWD Tractor with exclusiveILS and IVT 8030T Series Track Tractor with the 16-speed PowerShift Transmission
If you grow wheat, rice, or barley, the 8030 Series can help you get more from every acre. Its starts with seeding your crop. And a John Deere 8030 Series Tractor combined with John Deere airseeding equipment make it simple and productive. Once your crop is mature and ready for harvest, the 8030 Series can be hitched onto your grain cart. With the Infinitely Variable Transmission (IVT), youcan precisely match the speedof your combine for easier on-the-go unloading. After your cart is loaded, youcan utilize the IVTs built-in capabilities and take advantage of fast transport speeds, at low engine rpm, for optimal fuel efficiency. Your post-harvest tillage chores will be a breeze if you choose an 8030 Series Tractor equipped with Independent Link Suspension (ILS). You can put more power to the ground and work more acres in less time.

You get plenty of lugging power for tillage. Extra hydraulic flow for seeding. Plenty of PTO power for grain carts.
In min-till fields, an 8030T Series Track Tractor with a 2100 Min-till Ripper can conserve soil moisture, shatter compaction, and protect crop residue.
The 8030 Series gives you built-in John Deere quality and reliability that youll want to keep in your family for years to come.
A 9.0 L PowerTech Plus engine givesthe 8530 (shown above) plenty oflugging power perfect when pulling JohnDeere tillage tools like this 9-shank, 2700 Mulch Ripper.
With the 8030 Series youmay be able to easily do the work of multiple tractors and get even more from your new tractor investment.
28 Loader/livestock systems
Heres a hired hand livestock producers are sure to appreciate
John Deere 843 Loader specifications Lift capacity to maximum height at 31.5 in. (80 cm) 5,060 lb. (2295 kg) Lift capacity to 59 in. (1.5 m) at 31.5 in. (80 cm) 6,765 lb. (3068 kg) Boom cylinder breakout force at 31.5 in. (80 cm) 8,025 lb. (3640 kg) Bucket rollback force at ground 10,093 lb. (4578 kg) Maximum lift height to pivot pin 182 in. (4623 mm) Maximum rollback angle 39 degrees Maximum dump angle at ground level 72 degrees Digging depth 10 inches (254 mm)
The 8030 Series isnt just forplanting and tillage work. Itcan also lend a helping hand toyour livestock operation. Add a John Deere 843 Loader and finish your feeding chores quickly and efficiently. With a maximum lift capacity of up to 6,765 lb. at 4.9 ft., the 843 Loader can help you easily load silage, move round bales, orclean your feedlots. But thats not all. On the road, the 8030 Series can tow your high-capacity slurry tanks or grain wagons. Transport up to 31 mph and you can finish your material handling chores in less time. Plus, features like the Independent Link Suspension (ILS), Infinitely Variable Transmission (IVT), andauxiliary braking systems give you plenty of control, enhanced fuel economy, and sure-footed stopping power.
Do you feel the need for SPEED? Add the 31-mph Value Package* to your 8030 Series Tractor. mph Transport up to 31 mph while hauling material from site to site. Now compatible with row-crop dual tires. See your dealer for details. *Note: The 31 mph Value Package requires air and/or hydraulic brakes, and B speed-rated 31-mph tires.
Add a John Deere 843 Loader to your8030 Series Tractor andraise your productivity togreater heights.
John Deere makes connecting your new loader quick and easy so you can finish your chores fast.

An 843 Loader can help you get the most from your 8030 Series Tractor. Loader controls are simple and easy-to-learn. Visibility from the CommandView cab is uncompromised.
Your John Deere dealer has a wide arrayof attachments tocomplement the rugged 843 Loader. Visit your dealer for details.

30Serviceability

You get easy access to service points for fast, routine maintenance
SmartCircuit CAN bus technology fuses are located just behind thetractor seat for quick, easy access. The total number offuses has also been reduced compared to previous models. Hydraulic filter change interval has been increased to 1,500 hours. Plus each filter base has an anti-drain check valve to prevent excess oil drainage when servicing filters. A self-priming fuel system with electric pump bleeds air after the filter is changed. Fuel filter change intervals are 500 hours.
Whether youre changing the oil, orreplacing a fuse, John Deere keeps it nice and simple. Access to all daily service and fill points is hassle-free and can be done from ground level with notools required. Where possible, service intervals have been extended toreduce maintenance time andcosts. The 8030 Series comes with SmartCircuit CAN bus technology. The system features fewer fuses, relays, and wiring connections for greater reliability. Access to the fuse compartment is conveniently located behind the tractor seat.
ServiceADVISOR diagnostics help John Deere service technicians diagnose and evaluate your tractors systems more quickly to help you improve equipment uptime and reduce operating costs. The factory-trained technician simply plugsthe computer into the tractors easy-access port to begin the session.
To further reduce maintenance costs, long-life coolant with conditioner is used as the factory fill. The first required change interval is three years or 3,000 hours.
Routine service is quick and easy to improve your uptime and reduce your costs.
You can extend oil filter change intervals to 375 hours when you use John Deere Plus-50 oil and oil filters. Plusa top-load oil filter makes changes clean, quick, and easy.
Sometimes its the little things that make the difference, like changing your tractors air filter, or filling it with fuel. You shouldnt have to use a ladder to reach the air filter, or stand precariously on the rear of your tractor to fill it with fuel. With the John Deere 8030 Series, you can easily reach both while standing firmly on the ground. The front radiator grill easily folds out so you can quickly inspect or clean it as needed. And to optimize your tractors performance and fuel efficiency, its always a good idea to check and adjust tire inflation pressures to proper levels as needed.

Individual specifications by model
ENGINE PERFORMANCE Rated PTO at 2,100 engine rpm Rated engine hp (ISO), 97/68/EC, at 2,100 engine rpm Maximum engine hp (ISO), 97/68/EC at 1,900 engine rpm Intelligent Power Management (Optional) ** TRANSMISSION John Deere 16-speed Automatic PowerShift 16F/4R John Deere Infinitely Variable Transmission (IVT) 26 mph (42 km/h) John Deere Infinitely Variable Transmission (IVT) 31 mph (50 km/h) FINAL DRIVES REAR AXLES 100 x 2807 mm diameter (3.94 x 110.5 in.) long, single taper hub 100 x 3010 mm diameter (3.94 x 118.5 in.) long, single taper hub 110 x 3010 mm diameter (4.33 x 118.5 in.) long, single taper hub 110 x 3010 mm diameter (4.33 x 118.5 in.) long, dual taper hub 120 x 3010 mm diameter (4.74 x 118.5 in.) long, dual taper hub 120 x 2438 mm diameter (4.74 x 96.0 in.) long, dual taper hub FRONT AXLES 2WD tread range 60 to 88 in. (1524 to 2235 mm) 1300 Series MFWD - tread range 60 to 88 in. (1524 to 2235 mm) 1500 Series MFWD - tread range 60 to 144 in. (1524 to 3657 mm) MFWD with ILS tread range 60 to 132 in. (1524 to 3352 mm) DIFFERENTIAL LOCK (front axle) 2-wheel-drive 1300 Series MFWD 1500 Series MFWD MFWD with Independent Link Suspension (ILS) DIFFERENTIAL LOCK (rear axle) Full-locking, electrohydraulic HYDRAULIC SYSTEM (type) Selective control valves Main pump, axial piston (displacement) Clean oil reservoir charge pump Maximum pressure Rated flow, 63 cc pump Rated flow, 85 cc pump Available flow at a single SCV 3-POINT HITCH (rear) - Electrohydraulic sensing Category 3/3N w/Quik-Coupler Standard Category 3/3N w/Quik-Coupler Optional Category 4N/3 w/Quik-Coupler Optional, Standard on 8530 only 3-POINT HITCH (front, requires ILS) Category 3N Standard-lift capacity WHEELBASE 2WD MFWD/ILS MFWD/ILS axle clearance PTO (power take off) 1-3 /4 in., 20-spline, 1,000 rpm 1-3/4 in., 20-spline, 1,000 rpm, capable of 1-3/8 in. 540/1,000 rpm 1-3/4 in., 20-spline, 1,000 rpm, with 1-3/8 in. 540*/1,000 rpm gear case AVERAGE STANDARD WEIGHT less weights 2WD MFWD MFWD with ILS hp (134 kW) 225 hp (166 kW) 240 hp (177 kW) hp (149 kW) 225 hp (168 kW) 250 hp (186 kW) 245 hp (180 kW) 275 hp (202 kW) 305 hp (224 kW) 265 hp (195 kW) 300 hp (219 kW) 330 hp (243 kW) Up to 35 engine horsepower at 2,100 RPM (rated speed) Standard Optional Optional Inboard planetary Rack-and-pinion na na hp (205 kW) 330 hp (243 kW) 360 hp (265 kW)
ENGINE PERFORMANCE Rated engine, PTO at 2,100 engine rpm Rated engine hp (ISO), 97/68/EC at 2,100 engine rpm Maximum engine hp (ISO), 97/68/EC at 1,900 engine rpm 16-speed Automatic PowerShift 16F/4R 8230T 200 hp (149 kW) 240 hp (177 kW) 265 hp (195 kW) 8330T 235 hp (175 kW) 280 hp (206 kW) 310 hp (228 kW) Standard 89 in. (2261 mm) 60 to 88 in. (1524 to 2235 mm) 92 to 120 in. (2337 to 3048 mm) 3500 and 5500 Series Standard Optional 2,849 sq. in. (1.84 m2) 3,204 sq. in. (2.07 m2) 4,450 sq. in. (2.87 m2) 5,340 sq. in. (3.45 m2) 9.5 psi (65.50 kPa) 8.4 psi (57.92 kPa) 6.1 psi (42.06 kPa) 5.1 psi (35.16 kPa) Closed-center, pressure/flow compensated 3 standard, 4th and 5th optional 4 standard, 3rd deduct, and 5th optional 45 cc standard, 57 cc optional Gear driven 2,900 psi (kPa) 33.5 U.S gpm/126 L/min 42.5 U.S. gpm/160 L/min 30 U.S. gpm/113.5 L/min Standard 15,200 lb. (6895 kg) Independent Standard Speed-sensitive, electrohydrostatic, planetary differential 130 U.S. gal. (492 L) 42.3 U.S. qt. (40 L) 25.5 U.S. qt. (24 L) 37 U.S. gal (140.1 L) 27,060 lb. (kg) 27 U.S. qt. (25.5 L) 8430T 255 hp (190 kW) 305 hp (225 kW) 335 hp (247 kW)

ENGINE Rated speed Torque rise Power bulge Type Aspiration Filter, engine air Displacement, bore and stroke Compression ratio Fuel Injection system Lubrication Filter, oil Type Filter system Filter, primary, filter, secondary Alternator/battery (cold cranking amps) 2,100 rpm 43% PTO 13% PTO hp John Deere PowerTech Plus diesel, in-line, 6-cylinder, wet-sleeve with 4 valve-in-head Variable geometry turbocharger with air-to-air aftercooling and exhaust gas recirculation Dual stage with engine cooling fan aspiration 549 cu. in. (9.0 L), 4.66 x 5.40 in. (118 x 136 mm) 16.3:1 High Pressure Common Rail, electronic injectors with variable injection timing and duration Full-pressure, full-flow filtration with bypass Replaceable cartridge style oil filter Electronically injected and governed, high-pressure common rail with electric fuel transfer pump, self priming Two stage with water separator and service indicator light 10 micron replaceable cartridge, 2 micron spin-on element 200 amp / 12 volt, (1,850 cca) Outboard planetary
TRANSMISSION na Standard WHEELBASE REAR AXLES na na na na Standard Optional Standard Optional Optional na Standard Optional Optional with or without duals na Standard Optional na na Optional na Optional Optional Standard, duals optional na na na na na na Tread spacing, standard Tread spacing optional Track type Camoplast Durabuilt 3500 and 5500 Track Belts Track width 25 in. (635 mm) Track widths, 16-in. (406 mm), 18-in. (457 mm), and 30-in. (762 mm) 16 in. (406 mm) 18 in. (457 mm) 25 in. (635 mm) 30 in. (762 mm) 16 in. (406 mm) 18 in. (457 mm) 25 in. (635 mm) 30 in. (762 mm) Selective control valves Main pump, axial piston (displacement) Clean oil reservoir charge and primary pump Maximum pressure Rated flow, 45 cc pump Rated flow, 57 cc pump Available flow at a single SCV Category 3/3N w/Quik-Coupler Standard-lift capacity 1-3/4 in., 20-spline, 1,000 rpm

Optional Optional

na na Standard Optional Optional
Filter, oil FUEL SYSTEM Type Filter system Filter, primary, filter, secondary

GROUND CONTACT AREA

FUEL SYSTEM
MAXIMUM AVERAGE STATIC GROUND PRESSURE na Limited slip Full-locking, electrohydraulic Full-locking, electrohydraulic Standard Closed-center, pressure/flow compensated 3 standard, 4th and 5th optional 4 standard, 3rd deduct, 5th optional 63 cc standard, 85 cc optional 85 cc standard, 63 cc optional 85 cc standard Gear driven, integrated 2,900 psi (kPa) 44 U.S gpm/166.6 L/min na 60 U.S. gpm/227.1 L/min 30 U.S. gpm/113.5 L/min 12,400 lb. (5625 kg) 15,200 lb. (6895 kg) 18,300 lb. (8301 kg) 12,400 lb. (5625 kg) 15,200 lb. (6895 kg) 18,300 lb. (8301 kg) 13,800 lb. (6260 kg) 15,200 lb. (6895 kg) 18,300 lb. (8301 kg) 11,000 lb. (4989 kg) 126.8 in. (3220 mm) na na 120.1 in. (3050 mm) / 118.9 in. (3020 mm) 23.2 in. (590 mm) Independent Standard Optional 21,774 lb. (9877 kg) 23,308 lb. (kg) 24,708 lb. (kg) 15,200 lb. (6895 kg) 17,300 lb. (7847 kg) 18,300 lb. (8301 kg) na na 18,300 lb. (8301 kg)
Fuel capacity ELECTRICAL SYSTEM Alternator/battery (total cold cranking amps)
ELECTRICAL SYSTEM FINAL DRIVES

HYDRAULIC SYSTEM (type)

PowerGard extended warranty protection plan All John Deere tractors come with a 24 total month/2,000 total hour factory basic warranty. You may elect to extend your warranty for engine and powertrain related components through the PowerGard Protection Plan. See your dealer for pricing and details, or go online towww.powergard.com.
3-POINT HITCH (rear) Electrohydraulic sensing is standard
PTO (power take off) STEERING CAPACITIES na na Fuel tank Cooling system Crankcase Transmission, differential, hydraulic system

Optional

*540 rpm speed selection is not compatible with models equipped with Cat. 4 drawbar. ** Activates during mobile rear PTO applications, and transport speeds. na=Not available Specifications and design subject to change without notice.
AVERAGE STANDARD WEIGHT less weights 23,808 lb. (kg) 24,708 lb. (kg) 23,808 lb. (kg) 24,708 lb. (kg) 23,952 lb. (kg) 25,352 lb. (kg)

25,791 lb. (kg)

After you make your purchase, you can add your own personal touch with John Deere attachments. Ask your dealer for more details.

INSTALLATION Manual

John Deere 8030 and 8020 Series Module
Applications John Deere 8130 to 8530 John Deere 8230T to 8430T John Deere 8120 to 8520 John Deere 8120T to 8520T Rapid Power Part # 40605 40605

TABLE OF CONTENTS

TROUBLESHOOTING:
If you have questions during the installation of this product, please visit www.bullydog.com/Product_Updates.php. The latest version of these instructions can be found at the same location. Technical support is available by calling 866-bullydog (866-285-5936).
INTRODUCTION...pg. 2 Parts DESCRIPTIONS....pg. 3 Module INSTALLATION 8030 series.... pgs. 4-series.... pgs. 7-10 OPERATING INSTRUCTIONS....pg. 11 Internet Update.... pgs. 12-14

INTRODUCTION

You have just purchased the most technologically advanced tractor module available for the John Deere 8030 and 8020 series tractors. The Rapid Power module is the safest and longest lasting module on the market. The Rapid Power module also comes with free technical support and internet update ability, just call: 1-866-285-5936. This instruction set outlines how to install and operate the Rapid Power module on All John Deere 8030 and now 8020 series tractors. Always remember to remove the module from the tractor before taking it in for any kind of service as the module may interfere. Bully Dog recommends installing a pyrometer gauge to monitor exhaust gas temperature when using any product to increase horsepower. *Due to John Deeres new software updates, the High power level should not be used for the 08 John Deere 8030 series tractors or any 8030 tractor that has been re-flashed by a John Deere dealer. Use of the High power setting with these tractors will result in warning lights and codes. If warning codes appear while operating, shut the tractor down, adjust the module to the Low power level, and continue operation. If problems persists contact Bully Dog Tech Support at 1-866-285-5936.

Product Description:

The product is made up of two different parts, the module box, and cable. Contents: 1. Rapid Power Module with Wiring Harness 2. Zip Ties
The module box: The module box contains the electronics that will allow your tractor to produce more horsepower. It is very important that this module is mounted away from all moving or hot parts. The box should be placed in an area protected from dirt and moisture.
The module box The cable: This cable allows the Rapid Power Module to connect to your tractors engine. At the end of the wiring harness are four plugs, two male and two female plugs. These plugs will connect directly to the tractors engine and wiring harness requiring no modification of the tractor. Map sensor plugs Fuel rail pressure sensor plugs

Male Plug

Female Plug

RPM DESCRIPTION

8030 Series Product placement overview:

Air Filter

MAP Sensor
Fuel Rail Pressure Sensor

RPM INSTALLATION

Installation instructions:
1. Open Hood of Tractor, install module when engine is not running and cool.
2.: Place module below the air filter in a safe location and run cable along the wiring harness toward the top of the engine.
3. Remove plug from the MAP sensor located at the top of the engine. Note: Make sure the gray cap is securely fastened to male plug and is not in the MAP Sensor.
4. Plug tractor male plug into module female plug

Module Female Plug

5. Plug the module male plug into the tractor MAP sensor.

Module Male Plug

6. Continue routing module cable along the wiring harness above the engine. Run the cable down between the engine block and starting fluid can to the location shown.

Module cable run

7.:Disconnect the plug from the factory fuel rail pressure sensor.
Warning: There might be a tamper resistant sleeve that needs to be removed from the Fuel rail pressure sensor. If applicable, remove carefully as to not void the tractors warranty.

8. Insert module female plug into fuel rail pressure sensor.

Fuel Rail Sensor Plug

9. Connect the module male plug to the tractor female plug.
Fuel Rail Sensor Female Plug
10. Use zip ties to secure the Rapid Power cable to the tractor wiring harness. Be sure the cable will be safe from moving parts (such as the starter/flywheel) or hot exhaust system parts. Zip tie the module box to the cable harness as shown.
Warning: Do not remove module while tractor is running. Shut down machine and then remove module.
8020 SERIES INSTALL INSTRUCTIONS The Rapid Power module will increased power and capability for your 8020 series tractor. Without changing the wiring harness the Rapid Power Module can be modified to work with the 8020 series tractor. The Module will provide you the power and reliability that you have come to expect from Bully Dog Technologies. 1.: Open Hood of Tractor, install module when engine is not running and is cool.
2.: Place module below the air filter in a safe location and run cable along the wiring harness toward the front of the engine.
3.:Locate the Fuel Rail pressure sensor.
Male Fuel Rail Sensor Plug
4.: Remove female plug from the Fuel Rail pressure sensor located on the right side of the engine.
Female Fuel Rail Sensor Plug
5.: Route the Rapid Power fuel pressure sensor cable to the fuel rail pressure sensor.
6.: Insert the Rapid Power module female fuel pressure sensor plug to the male fuel pressure sensor.
7.: Insert the Rapid Power module male fuel pressure sensor plug to the female fuel pressure sensor.
8020 SERIES INSTALL INSTRUCTIONS 8.: Locate the Rapid Power Module MAP sensor plugs.
9.: Couple the Female and Male ends of the Rapid Power Module MAP sensor plugs. Use of these plugs is not needed on the 8020 Series tractors.
10.: Attach the MAP sensor plugs to the main cable using a zip tie that will secure the plugs for future use.
11.: Zip Tie module and loop and zip tie any remaining cable. Ensure that the cable and module will be safe from moving parts (such as the starter/flywheel) or hot exhaust system parts.

Tractors

JD 8130* JD 8230* JD 8330* JD 8430* JD 8530* JD 8230 T* JD 8330 T* JD 8430 T* JD 8120 (T) JD 8220 (T) JD 8320 (T) JD 8420 (T) JD 8520 (T)

180 HP 200 HP 225 HP 250 HP 275 HP 200 HP 235 HP 255 HP 170 HP 190 HP 215 HP 235 HP 255 HP
Low Power Level High Power Level Total Horsepower Total Horsepower*
~200 ~220 ~250 ~275 ~300 ~220 ~260 ~280 ~200 ~220 ~250 ~270 ~290 ~215 ~240 ~270 ~300 ~330 ~240 ~280 ~305 ~220 ~250 ~280 ~305 ~330
This chart illustrates the approximate power increase when the Rapid Power Module is set at the desired power level.~ Denotes an approximate value. *Due to John Deeres new software updates, the High power level should not be used for the 08 John Deere 8030 series tractors or any 8030 tractor that has been re-flashed by a John Deere dealer. Use of the High power setting with these tractors will result in warning lights and codes. If warning codes appear while operating, shut the tractor down, adjust the module to the Low power level, and continue operation. If problems persists contact Bully Dog Tech Support at 1-866-285-5936.

OPERATING INSTRUCTIONS

Operating Instructions: Internal power level switch: The Rapid Power module has three power settings, Stock, Low Power Level or High Power Level. To select different power levels remove the cover of the module box, locate the red internal power switch, and set the switch to the desired power level per illustrations below.
Stock Low Power Level High Power Level These two positions provide the same power.
Both switches in the off position indicates Stock performance
First switch in the on position indicates Low Power Level.
Second switch in the on Position indicates High Power Level.
Both switches in the on Position indicates High Power Level.
*Due to John Deeres new software updates, the High power level should not be used for the 08 John Deere 8030 series tractors or any 8030 tractor that has been re-flashed by a John Deere dealer. Use of the High power setting with these tractors will result in warning lights and codes. If warning codes appear while operating, shut the tractor down, adjust the module to the Low power level, and continue operation. If problems persists contact Bully Dog Tech Support at 1-866-285-5936. Be sure to securely fasten the module cover after changing the power level. Make sure the cable exits the box properly in the hole provided. 1. After completing the installation of the module, turn the tractor on to test if the module is working. If the tractor starts then the module is working. If the tractor does not start, check all of the connections on the install to be sure that they are secure and then attempt to start the tractor again. 2. Adjust performance setting to desired level and enjoy. USB Port

Internal Power Switches External Power Switch Female Plug (External Switch part number 40610)

Warranty

INTERNET UPGRADES/Update agent
IMPORTANT: The information on this page is applicable to all vehicles and tractors.
Internet Update The Rapid Power Module is internet updatable. To update remove cover from the module and insert a USB cable into the USB port. Ensure that you have downloaded the Update Agent. The Update Agent will automatically recognize the module and prompt you to update the module if an update is available. Simply visit Bully Dogs web site www.bullydog.com/Download_Center.php to access the Download center to obtain the latest version of the Rapid Power Module.
The most efficient way of keeping up to date with Bully Dog product versions is to use the Update Agent. The Update Agent is a software program developed by Bully Dog Technologies specifically to update Bully Dog products. The Update Agent is easy to use, it can be loaded on any windows based PC running Windows 2003 or newer. The Update Agent is attainable free of charge at the Bully Dog download center or by ordering a CD ROM through a Bully Dog distributor.

INTERNET UPDATE

USB Driver Installation (Windows XP only!)
IMPORTANT: Install the Update Agent prior to plugging in your module.
Your computer will not recognize the Module until the Driver is installed. 1) Remove cover from Rapid Power Module 2) Plug Module into PC using a USB cable (Male A end for PC, Male B end for Module: Same type of cable as used for most printers) 3) Windows will recognize the Module and attempt to install software. 4) If Windows asks if it can connect to Windows Update to search for the software select NO, not at this time. Select Next to continue. 5) Select Install Automatically, then press next.
6) Windows will ask you to select the software you would like to install. Select BDT Rapid Power USB and select next.
7) Windows will warn that this driver is not signed, but select continue anyway!
8) Allow the driver installation to complete and click FINISH
9) The Update Agent should now recognize the device and allow the update to take place. This could take approximately 30 Seconds or more

Doc.# 40605-99 V2.0

Check out more of our Adrenaline Pumping products!
Downloaders Intake Systems

Triple Dog GT

Exhaust Systems

Free Technical Support at: 866-bullydog (866-285-5936)
See More at: bullydog.com