Prepare the HP All-in-One for shipment...54 Pack the HP All-in-One....Technical information...57 System requirements....57 Paper specifications...57 Print specifications...59 Copy specifications....60 Scan specifications....60 Physical specifications...60 Power specifications...60 Environmental specifications...60 Acoustic information...60 Environmental product stewardship program..61 Regulatory notices...62 Index.....65

HP All-in-One overview

You can make copies quickly and easily from the HP All-in-One without turning on your computer. You can also use the HP All-in-One to print and scan photos and text documents by using the software installed on your computer during the initial setup. The HP All-in-One at a glance Control panel buttons Status light overview
The HP All-in-One at a glance

Label 9 10

Description Control panel Input tray Tray extender Paper-width guide Print cartridge door Glass Lid backing Rear door Rear USB port Power connection
Chapter 1 HP All-in-One overview

Control panel buttons

Label 1
Name and Description On: Turns the HP All-in-One on or off. The On button is lit when the HP All-in-One is powered on. The light blinks while performing a job. When the HP All-in-One is off, a minimal amount of power is still supplied to the device. To completely disconnect the power supply to the HP All-in-One, turn the device off, and then unplug the power cord.
Check Paper light: Indicates the need to load paper or remove a paper jam. Check Print Cartridge light: Indicates the need to reinsert the print cartridge, replace the print cartridge, or close the print cartridge door. Cancel: Stops a print, copy, or scan job. Copies: Specifies the number of copies to be printed.

(continued)

Name and Description Tip From the control panel, you can specify up to nine copies of an original. However, if you connect the HP All-in-One to a computer, you can use the HP Photosmart Software to specify more. When initiating more than nine copies of an original from the HP Photosmart Software, only the last digit of the number of copies is represented on the control panel. For example, if you are making 25 copies, the number 5 appears on the display.
Plain Paper Type: Changes the paper type setting to plain paper. This is the default setting for the HP All-in-One. Photo Paper Type: Changes the paper type setting to photo paper. Make sure photo paper is loaded in the input tray. Start Copy Black: Starts a black-and-white copy job. In certain situations (for example, after clearing a paper jam), this button resumes printing. Start Copy Color: Starts a color copy job. In certain situations (for example, after clearing a paper jam), this button resumes printing. Scan: Starts scanning the original currently on the glass.

Status light overview

Several indicator lights inform you of the status of the HP All-in-One.

Label 3 4

Description On button Check Paper light Check Print Cartridge light Paper Type lights (for the Plain Paper Type and Photo Paper Type buttons)
The following table describes common situations and explains what the lights mean. Light status All lights are off. The On light and one of the Paper Type lights are on. The On light is blinking. The On light blinks quickly for 3 seconds and then is on steady. The On light blinks for 20 seconds and then is on steady. The Check Paper light is blinking. What it means The HP All-in-One is turned off. Press the On button to turn on the device. The HP All-in-One is ready for printing, scanning, or copying. The HP All-in-One is busy printing, scanning, copying, or aligning the print cartridges. You pressed a button while the HP All-in-One is already busy printing, scanning, copying, or aligning the print cartridges. You pressed the Scan button and there was no response from the computer. The On, Check Paper, and Check Print Cartridge lights are blinking. The HP All-in-One is out of paper. The HP All-in-One has a paper jam. The paper size setting does not match the paper size detected in the input tray. The print cartridge door is open. The print cartridges are missing or not seated correctly. The tape was not removed from the print cartridge. The print cartridge is not intended for use in this HP All-in-One. The print cartridge might be defective.
The Check Print Cartridge light is blinking.
Scanner failure. Turn off the HP All-in-One, then on again. If the problem persists, contact HP Support. The HP All-in-One has a fatal error. 1. 2. 3. 4. Turn the HP All-in-One off. Unplug the power cord. Wait a minute, then plug the power cord back in. Turn the HP All-in-One back on.

All lights are blinking.

If the problem persists, contact HP Support.

Find more information

You can access a variety of resources, both printed and onscreen, that provide information about setting up and using the HP All-in-One.

Sources of information

Setup Guide The Setup Guide provides instructions for setting up the HP All-inOne and installing software. Make sure you follow the steps in the Setup Guide in order. If you have problems during setup, see Troubleshooting in the last section of the Setup Guide, or see Troubleshooting information in this guide. User Guide

For best results, set the paper type and paper size before copying or printing.

Load envelopes

You can load one or more envelopes into the input tray of the HP All-in-One. Do not use shiny or embossed envelopes or envelopes that have clasps or windows. Note For specific details on how to format text for printing on envelopes, consult the help files in your word processing software. For best results, consider using a label for the return address on envelopes. To load envelopes 1. Remove all paper from the input tray. 2. Insert one or more envelopes into the far-right side of the input tray with the envelope flaps up and on the left. Slide the stack of envelopes forward until it stops.
Tip For more help on loading envelopes, refer to the diagram engraved in the base of the input tray. 3. Slide the paper-width guide inward against the stack of envelopes until it stops. Do not overload the input tray; make sure the stack of envelopes fits within the input tray and is not higher than the top of the paper-width guide.
Load other types of paper
The following papers require extra attention to load them properly. Note Not all paper sizes and paper types are available with all the functions on the HP All-in-One. Some paper sizes and paper types can only be used if you are starting a print job from the Print dialog box in a software application. They are not available for copying. Papers that are only available for printing from a software application are indicated as such. HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency Film Insert the film so that the white transparency strip (with arrows and the HP logo) is on top and is going into the input tray first. Note The HP All-in-One cannot automatically detect the paper size or paper type. For best results, set the paper type to transparency film before printing or copying onto transparency film. HP Iron-On Transfers (for printing only) 1. Flatten the transfer sheet completely before using it; do not load curled sheets. Tip To prevent curling, keep transfer sheets sealed in the original package until you are ready to use them. 2. Locate the blue stripe on the nonprinting side of the transfer paper and then manually feed one sheet at a time into the input tray with the blue stripe facing up.
HP Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards (for printing only) Insert a small stack of HP greeting card paper into the input tray with the print side down; slide the stack of cards forward until it stops. Tip Make sure the area on which you want to print is inserted first, facing down in the input tray.
HP Inkjet labels (for printing only) 1. Always use letter or A4 label sheets designed for use with HP inkjet devices (such as HP inkjet labels), and make sure that the labels are no more than two
years old. Labels on older sheets might peel off when the paper is pulled through the HP All-in-One, causing subsequent paper jams. Fan the stack of labels to make sure none of the pages are sticking together. Place a stack of label sheets on top of full-size plain paper in the input tray, label side down. Do not insert labels one sheet at a time.

Avoid paper jams

To help avoid paper jams, follow these guidelines. Remove printed papers from the output tray frequently. Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn. Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type. Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width guide does not bend the paper in the input tray. Do not force paper too far forward in the input tray. Use paper types that are recommended for the HP All-in-One.

Print from your computer

The HP All-in-One can be used with any software application that allows printing. You can print a range of projects, such as borderless images, newsletters, greeting cards, iron-on transfers, and posters. Print from a software application Stop a print job
Print from a software application
Most print settings are automatically handled by the software application you are printing from or by HP ColorSmart technology. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features. For more information about printing from your computer, see the onscreen Help that came with the HP All-in-One. To print from a software application (Windows) 1. Make sure you have paper loaded in the input tray. 2. On the File menu in your software application, click Print. 3. Make sure the HP All-in-One is the selected printer. 4. If you need to change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. 5. Select the appropriate options for your print job by using the features available on the various tabs. 6. Click OK to close the Properties dialog box. 7. Click Print or OK to begin printing. To print from a software application (Mac) 1. Make sure you have paper loaded in the input tray. 2. From the File menu in your software application, choose Page Setup. 3. Make sure the HP All-in-One is the selected printer. 4. Specify the page attributes: Choose the paper size. Select the orientation. Enter the scaling percentage. 5. Click OK. 6. From the File menu in your software application, choose Print. The Print dialog box appears, and the Copies & Pages panel opens. 7. Change the print settings for each option in the pop-up menu, as appropriate for your project. 8. Click Print to begin printing.

Print cartridge slot for the tri-color print cartridge Print cartridge slot for the black and photo print cartridges
Pull the print cartridge toward you out of its slot. If you are removing the black print cartridge in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector or an airtight plastic container. If you are removing the print cartridge because it is low or out of ink, recycle the print cartridge. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges free of charge. For more information, go to the following website: www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html Remove the new print cartridge from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape by using the pink pull tab.
Caution Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
Slide the new print cartridge forward into the empty slot. Then gently push on the upper part of the print cartridge forward until it clicks into the socket. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing a black or photo print cartridge, slide it into the right slot.
Close the print cartridge door.
If the print cartridge alignment sheet prints, load it on the left front corner of the glass with the top of the page to the left.
10. Press the Scan button. The HP All-in-One aligns the print cartridges. Recycle or discard the print cartridge alignment sheet.
Align the print cartridges
The HP All-in-One prompts you to align cartridges every time you install or replace a print cartridge. You can also align the print cartridges at any time from the control panel or by using the software you installed with the HP All-in-One. Aligning the print cartridges ensures high-quality output.
Note If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges. To align newly installed print cartridges 1. Make sure you have letter or A4 unused plain white paper loaded in the input tray. The HP All-in-One prints a print cartridge alignment sheet. Note If you have colored paper loaded in the input tray when you align the print cartridges, the alignment will fail. Load unused plain white paper into the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. 2. 3. Load the print cartridge alignment sheet on the left front corner of the glass with the top of the page to the left. Press the Scan button. The HP All-in-One aligns the print cartridges. Recycle or discard the print cartridge alignment sheet.

Order other supplies

To order other supplies, such as HP All-in-One software, a copy of the User Guide, a Setup Guide, or other customer-replaceable parts, call the phone number for your country/region. Country/region Asia Pacific (except for Japan) Australia Europe Number for ordering +(Germany) +(U.K.) New Zealand South Africa U.S. and Canada 147 +27 (0)1-800-HP-INVENT (1-800-474-6836)
To order supplies in other countries/regions not listed in the table, go to www.hp.com/ support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Troubleshooting information
This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen Help that came with your software. Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP All-in-One to your computer before the software installation screen prompts you to do so, you must follow these steps: Troubleshooting common setup issues 1. Disconnect the USB cable from the computer. 2. Uninstall the software (if you have already installed it). 3. Restart your computer. 4. Turn off the HP All-in-One, wait one minute, then restart it. 5. Reinstall the HP All-in-One software. Caution Do not connect the USB cable to the computer until prompted by the software installation screen. For information about uninstalling and reinstalling the software, see Uninstall and reinstall the software. See the list below for information on other topics covered in this chapter. Additional troubleshooting topics in this User Guide Setup troubleshooting: Contains troubleshooting information on hardware setup and software installation. Operational troubleshooting: Contains information on issues that might occur during normal tasks when using the HP All-in-One features. Additional sources of information are also available for helping you troubleshoot issues you might have with the HP All-in-One or HP Photosmart Software. See Find more information. If you are unable to solve the problem using the onscreen Help or HP websites, call HP Support using the number for your country/region. For more information, see HP warranty and support.

Troubleshooting

View the Readme file
You might want to refer to the Readme file for information on system requirements and possible installation problems. From a Windows computer, you can access the Readme file by clicking Start, pointing to Programs or All Programs, pointing to HP, pointing to Deskjet All-InOne F300 series, and then clicking Readme. From a Mac, you can access the Readme file by double-clicking the icon located in the top-level folder of the HP All-in-One software CD-ROM.

Chapter 10

Setup troubleshooting
This section includes installation and configuration troubleshooting tips for some of the most common issues associated with hardware and software setup.
Hardware setup troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-in-One hardware. The HP All-in-One will not turn on Cause The HP All-in-One is not properly connected to a power supply.
Solution Make sure the power cord is firmly connected to both the HP All-in-One and the power adaptor. Plug the power cord into a grounded power outlet, surge protector, or power strip.
Power connection Power cord and adaptor Grounded power outlet
If you are using a power strip, make sure the power strip is on. Or, try plugging the HP All-in-One directly into a grounded power outlet. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the HP All-in-One into a switched outlet, make sure the switch is on. If it is switched to on but still does not work, then there might be a problem with the power outlet. You pressed the On button too quickly.
Solution The HP All-in-One might not respond if you press the On button too quickly. Press the On button once. It might take a few minutes for the HP All-inOne to turn on. If you press the On button again during this time, you might turn the device off. Warning If the HP All-in-One still does not turn on, it might have a mechanical failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to:
www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
I connected the USB cable, but I am having problems using the HP All-in-One with my computer Solution You must first install the software that came with the HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Connecting the USB cable before prompted can cause errors. Once you have installed the software, connecting your computer to the HP All-inOne with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer.

Uninstall and reinstall the software If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One. A reinstall can take from 20 to 40 minutes. There are three methods to uninstall the software on a Windows computer, and one method to uninstall on a Mac.
To uninstall from a Windows computer, method 1 1. Disconnect the HP All-in-One from your computer. Do not connect the HP All-inOne to your computer until after you have reinstalled the software. 2. Press the On button to turn off the HP All-in-One. 3. On the Windows taskbar, click Start, Programs or All Programs, HP, Deskjet All-In-One F300 series, Uninstall. 4. Follow the onscreen instructions. 5. If you are asked whether you would like to remove shared files, click No. Other programs that use these files might not work properly if the files are deleted. 6. Restart your computer. Note It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software.
To reinstall the software, insert the HP All-in-One CD-ROM into your computers CD-ROM drive, and follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One. 8. After the software is installed, connect the HP All-in-One to your computer. 9. Press the On button to turn the HP All-in-One on. After connecting and turning on the HP All-in-One, you might have to wait several minutes for all of the Plug and Play events to complete. 10. Follow the onscreen instructions. When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray. To verify that the software is properly installed, double-click the HP Solution Center icon on the desktop. If the HP Solution Center shows the essential icons (Scan Picture and Scan Document), the software has been properly installed. To uninstall from a Windows computer, method 2 Note Use this method if Uninstall is not available in the Windows Start menu.

1. 2. 3. 4. 5.

On the Windows taskbar, click Start, Settings, Control Panel. Double-click Add/Remove Programs. Select HP PSC & Officejet 6.0, and then click Change/Remove. Follow the onscreen instructions. Disconnect the HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software.
Insert the HP All-in-One CD-ROM into your computers CD-ROM drive and then start the Setup program. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.
To uninstall from a Windows computer, method 3 Note Use this method if Uninstall is not available in the Windows Start menu.

1. 2. 3. 4.

Insert the HP All-in-One CD-ROM into your computers CD-ROM drive and then start the Setup program. Select Uninstall and follow the onscreen directions. Disconnect the HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software.

5. 6. 7.

Start the Setup program for the HP All-in-One again. Select Reinstall. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.
To uninstall from a Mac 1. Disconnect the HP All-in-One from your Mac. 2. Double-click the Applications:Hewlett-Packard folder. 3. Double-click HP Uninstaller. Follow the onscreen instructions. 4. After the software is uninstalled, disconnect the HP All-in-One, and then restart your computer. Note It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 5. 6. 7. To reinstall the software, insert the HP All-in-One CD-ROM into your computers CD-ROM drive. On the desktop, open the CD-ROM and then double-click HP All-in-One Installer. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.
Operational troubleshooting
This section contains information on paper and print cartridge troubleshooting. If you have Internet access, you can get help from the HP website at www.hp.com/ support. The website also provides answers to frequently asked questions.

Paper troubleshooting

To help avoid paper jams, only use paper types that are recommended for the HP Allin-One. For a list of recommended papers go to www.hp.com/support. Do not load curled or wrinkled paper, or paper with bent or torn edges, into the input tray.

If paper does become jammed in your device, follow these instructions to clear the paper jam. Clear paper jams If the HP All-in-One has a paper jam, first check the rear door. If the jammed paper is not in the rear rollers, check the front door. To clear a paper jam from the rear door 1. Press in the tab on the left side of the rear door to release the door. Remove the door by pulling it away from the HP All-in-One.
Gently pull the paper out of the rollers. Caution If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If you do not remove all the pieces of paper from the HP All-in-One, more paper jams are likely to occur.
Replace the rear door. Gently push the door forward until it snaps into place. Press Start Copy Black to continue the current job.
To clear a paper jam from the front door 1. If necessary, pull the input tray down to open it. Then, lower the print cartridge door.
Press Start Copy Black to continue the current job.
Print cartridge troubleshooting
If you are experiencing problems with printing, you might have a problem with one of the print cartridges. To troubleshoot print cartridges 1. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts. Check for possible damage to the coppercolored contacts or ink nozzles. Make sure the plastic tape has been removed. If it is still covering the ink nozzles, gently remove the plastic tape by using the pink pull tab. 2. Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forward until it clicks into the socket.
Repeat steps 1 and 2 for the tri-color print cartridge on the left side. If the problem persists, print a self-test report to determine if there is a problem with the print cartridges. This report provides useful information about your print cartridges, including status information. If the self-test report shows a problem, clean the print cartridges. If the problem persists, clean the copper-colored contacts of the print cartridges. If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it. Replace the print cartridges Print a self-test report Clean the print cartridges Clean the print cartridge contacts

Get support and other information from the Internet
To find support and warranty information, go to the HP website at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. This website also offers technical support, drivers, supplies, ordering information and other options such as: Access online support pages. Send HP an e-mail message for answers to your questions. Connect with an HP technician by using online chat. Check for software updates.
Support options and availability vary by product, country/region, and language.
Before you call HP customer support
Software programs from other companies might be included with the HP All-in-One. If you experience problems with any of those programs, you will receive the best technical assistance by calling the experts at that company. If you need to contact HP Customer Support, do the following before you call: 1. Make sure that: a. The HP All-in-One is plugged in and turned on. b. The specified print cartridges are installed correctly. c. The recommended paper is properly loaded in the input tray. Reset the HP All-in-One: a. Turn off the HP All-in-One by pressing the On button. b. Unplug the power cord from the back of the HP All-in-One. c. Plug the power cord back into the HP All-in-One. d. Turn on the HP All-in-One by pressing the On button. To find support and warranty information, go to the HP website at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Check the HP website for updated information or troubleshooting tips for the HP All-in-One. If you are still experiencing problems and need to speak with an HP Customer Support Representative, do the following: a. Have the specific name of the HP All-in-One, as it appears on the control panel, available. b. Print a self-test report. c. Make a color copy to have available as a sample printout. d. Be prepared to describe your problem in detail. e. Have your serial number and service ID ready. Call HP Customer Support. Be near the HP All-in-One when you call. Print a self-test report Access your serial number and service ID
For more information, see:
Access your serial number and service ID
You can access the serial number and service ID for the HP All-in-One by printing a self-test report. Note If the HP All-in-One is not turning on, you can view the serial number by looking at the sticker on the rear side. The serial number is the 10-character code in the upper left corner of the sticker. 51
Chapter 11 To print a self-test report 1. 2. Press and hold Cancel on the control panel. While holding Cancel, press Start Copy Color. The self-test report prints, containing the serial number and service ID.

This margin is not compatible; however, the total writing area is compatible. The writing area is offset from center by 5.4 mm (0.21 inches), which causes asymmetric top and bottom margins.

Print specifications

Mode Max DPI Black Color Best Black Color Normal Black Color Fast Normal Black Color Fast Draft Black Color 600 x 600 dpi black 4800 x 1200 optimized dpi color Method: drop-on-demand thermal inkjet Language: LIDIL (lightweight imaging device interface language) Duty cycle: 700 printed pages per month Resolution (dpi) 4800 x 1200 optimized DPI 4800 x 1200 optimized DPIx x 1200 up to 4800 dpi optimizedx x x x x x 300 Technical information
Up to 4800 x 1200 optimized dpi color printing on premium photo papers, 1200 x 1200 input dpi. Up to 4800 x 1200 optimized dpi color printing on premium photo papers, 1200 x 1200 input dpi.

Chapter 12

Copy specifications
Mode Best Black Color Fast Black Color Digital image processing Up to 9 copies from original (varies by model) Fit to page Print resolution (dpi) 600 x x x x 300 Scan resolution (dpi)x x x x 1200
Maximum at 400% scaling. On photo paper or premium paper.

Scan specifications

Image editor included Integrated OCR software automatically converts scanned text to editable text Twain-compliant interface Resolution: up to 1200 x 2400 ppi optical; 19200 ppi enhanced (varies by model) Color: 48-bit color, 8-bit grayscale (256 levels of gray) Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)

Physical specifications

Height: 16.97 cm (7.0 inches) Width: 44 cm (16.8 inches) Depth: 25.9 cm (10.2 inches) Weight: 4.5 kg (10 pounds)

Power specifications

Power consumption: 80 W maximum Input voltage: AC 100 to 240 V ~ 1 A 5060 Hz, grounded Output voltage: DC 32 V===560 mA, 15 V or 16 V===530mA
Environmental specifications
Technical information Recommended operating temperature range: 15 to 32 C (59 to 90 F) Allowable operating temperature range: 5 to 35 C (41 to 95 F) Humidity: 15% to 80% RH non-condensing Non-operating (Storage) temperature range: 20 to 50 C (4 to 122 F) In the presence of high electromagnetic fields, it is possible the output from the HP All-inOne may be slightly distorted HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields

Acoustic information

If you have Internet access, you can get acoustic information from the HP website. Go to: www.hp.com/support.
Environmental product stewardship program
This section provides information on protecting the environment; ozone production; energy consumption; paper use; plastics; material safety data sheets; and recycling programs. This section contains information about environmental standards.
Protecting the environment
Hewlett-Packard is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment. For more information, visit HPs Commitment to the Environment website at: www.hp.com/hpinfo/globalcitizenship/environment/index.html

HP Deskjet F300 All-in-One series
Copyright 2006 Hewlett-Packard Development Company, L.P.
Adobe Acrobat Adobe Systems Incorporated / / WindowsWindows NT Windows MEWindows XP Windows 2000 Microsoft Corporation Intel Pentium Intel Corporation Energy Star Energy Star logo US Q8130-2

3. 4. 5. 6. 7.

HP HP Hewlett-Packard Company

10. 11.

HP

HP All-in-One... 3 HP All-in-One...3...4....5 2....9........11....11 USB ....11....11 4....13....13...13....15....18 5...21... 21....22 6....23....23...23...23....24 7....25....25....HP All-in-One.... 27 HP All-in-One...27...28....28 9....37... 37....37....38 10....39....39....40....HP...51.... 51 1
...52 HP...53 ID...53...54 /...54 HP All-in-One... 56 HP All-in-One...56 12....59....59....59....61....61....62....62....62....62....62...62....64.....67

HP All-in-One

HP All-in-One HP All-in-One HP All-in-One

1 HP All-in-One

[] HP All-in-One HP All-in-One [] HP All-in-One HP All-in-One

[] [] []

[] 9 HP All-in-One HP Photosmart HP Photosmart 9 25 5
[] HP All-in-One [] [] ( ) [] ( ) []

HP All-in-One

[] []

[] ( [] [] )

[] [] [] [] 3 [] 20 [] HP All-in-One [] HP All-in-One HP All-in-One HP All-in-One [] HP All-in-One HP All-in-One HP All-in-One
[][] [] HP All-in-One HP HP All-in-One 1. 2. 3. 4. HP All-in-One HP All-in-One

HP All-in-One

HP Photosmart 2600 series printer User Guide

HP All-in-One

HP Photosmart (Windows) HP Photosmart HP All-in-One HP All-in-One HP All-in-One HP All-in-One

HP Photosmart (Windows)

HP Photosmart HP All-in-One HP All-in-One HP Photosmart
HP Photosmart HP All-in-One HP

HP Photosmart Mac (Mac)

How Do I?() Get Started() Use Help()

www.hp.com/support HP

HP All-in-One USB USB Ethernet USB
USB USB HP Allin-One USB 1.1 2.0

USB USB HP All-in-One

USB HP All-in-One HP All-in-One HP All-in-One

Windows

1. a. Dock Apple b. Internet c. 2. a. Dock Apple b. c. (OS) (OS 10.2.8 10.3.x) (OS 10.4.x)

HP All-in-One LetterA4

Letter A4

1. HP All-in-One 2.

HP All-in-One
HP HP HP HP x 15 ()A4Letter Legal ( ) x 15 () HP All-in-One HP www.hp.com/learn/suresupply / HP
( HP ) HP All-in-One HP All-in-One 10 x 15 ()

HP HP

HP All-in-One HP All-in-One 10 x 15 (4 x 6 )

HP All-in-One Letter A4

2. 3.
HP All-in-One HP All-in-One HP All-in-One 4.
10 x 15 (4 x 6 ) HP All-in-One 10 x 15 10 x 15 HP HP HP All-in-One 10 x 15 ()

HP All-in-One

10 x 15 ()

1. 2.

16 HP Deskjet F300 All-in-One series

3.

HP All-in-One

HP All-in-One

HP HP

HP HP All-in-One

HP HP HP ()
1. HP Letter A4 ( HP ) HP All-in-One 2. 3.

HP All-in-One

HP All-in-One
HP ColorSmart HP All-in-One

(Windows)

HP All-in-One 5. 6. 7.

(Mac)

1. 2. 3. 4.

5. 6. 7. 8.

File()Page Setup() HP All-in-One OK() File() Print() Print()
HP All-in-One HP HP All-in-One

HP All-in-One

1. 2. 3. [] [] [ ] []

[] []

1. 2. 3. [] [] [] [] 4. [] []

1. 2. 3. [] ( 9 )

HP All-in-One 9
4. [] [] HP All-in-One 10 x 15
HP All-in-One () HP All-in-One
HP All-in-One HP All-in-One HP All-in-One HP Photosmart (Windows) HP Photosmart Mac (Mac) Windows Windows ( ) HP Windows HP HP All-in-One HP Photosmart Mac HP Photosmart (Windows) HP Photosmart Mac (Mac) HP All-in-One

1. 2. [] 3.

HP All-in-One
HP All-in-One HP All-in-One HP All-in-One
HP All-in-One HP All-in-One HP All-in-One HP All-in-One ()
1. HP All-in-One 2. 3. 4. HP All-in-One HP All-in-One
1. HP All-in-One 2. 3. 4. HP All-in-One 5. HP All-in-One
1. Letter A4 2. [] [] HP All-in-One

3.

[]
HP All-in-One www.hp.com/learn/suresupply /
1. HP All-in-One HP All-in-One HP All-in-One HP All-in-One 2. HP All-in-One

4. 5.

HP (HP Inkjet Supplies Recycling Program) / www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html 6.
10. [] HP All-in-One HP All-in-One HP All-in-One HP All-in-One HP All-in-One
1. Letter A4 HP All-in-One
HP www.hp.com/support / HP 2. 3. [] HP All-in-One

HP Photosmart

1. LetterA4 Legal 2. HP 3. 4. 5.

HP Photosmart Mac

1. LetterA4 Legal 2. HP Photosmart Studio Devices() HP Device Manager(HP ) 3. Devices() HP All-in-One 4. Information and Settings() Maintain Printer() Select Printer() 5. Select Printer() HP All-in-One Launch Utility() HP Printer Utility(HP )
6. Configuration Settings Panel() Clean() 7. Clean() 8. HP Printer Utility(HP ) []

() HP All-in-One

1. HP All-in-One HP All-in-One 2. HP All-in-One 3. HP All-in-One 30

4. 5. 6. 7.

8. 9. 10. HP All-in-One

HP HP

HP HP HP All-in-One www.hp.com/learn/suresupply/
HP All-in-One HP HP HP www.hp.com/learn/suresupply / // HP

1. HP 2. 3. 4. HP

1. HP Photosmart Studio Devices() HP Device Manager(HP ) 2. Devices HP All-in-One 3. Information and SettingsMaintain Printer Select Printer 4. Select Printer HP All-in-One Launch Utility HP Printer UtilityHP 5. Configuration SettingsSupply Info 6. Configuration Settings Supplies StatusOrder HP Supplies
HP All-in-One / / () +() +() 147 +27 (0)1-800-HP-INVENT (1-800-474-6836)
/ www.hp.com/ support/ HP
HP All-in-One HP All-in-One USB HP All-in-One HP All-in-One

1. 2. 3. 4. 5.

USB () HP All-in-One HP All-in-One USB
HP All-in-One HP Photosmart HP / HP HP
Windows HPDeskjet All-In-One F300 series Mac HP All-in-One

HP All-in-One

HP All-in-One HP All-in-One
[] [] HP All-in-One [] HP All-in-One [] HP All-in-One HP All-in- One HP www.hp.com/support

USB HP All-in-One

USB HP All-in-One USB USB USB HP All-in-One USB HP All-in-One USB

USB HP All-in-One

HP All-in-One [] HP All-in-One HP All-in-One [] HP All-in-One HP All-in-One HP All-in-One

HP All-in-One (Windows) (Mac) USB USB USB 3 USB Windows 95 Windows NT USB HP All-in-One USB HP All-in-One USB USB USB HP All-in-One
USB HP All-in-One USB USB HP All-in-One HP All-in-One HP All-in-One
HP All-in-One HP All-in- One HP All-in-One
HP All-in-One 1. 2. 3. 4. 5. 6. 7. HP All-in-One HP All-in-One OK
Windows HP HP All-in-One HP (Windows) HP All-in-One HP All-in-One HP All-in-One
1. Windows 2. d:\setup.exe D

1. 2.

HP Photosmart EssentialHP Photosmart Essential HP Photosmart Premier HP Photosmart Essential HP All-in-One

X USB

X 1. HP All-in-One 2. USB
3. 4. USB USB USB USB 3 USB 5. 6. Windows HP ()
HP All-in-One HP All-in-One

HP (Windows)

( ) HP All-in-One HP All-in-One
Windows () HP Deskjet All-In-One F300 series

HP (Windows)

HP ( ) HP HP HP (Windows)
USB HP All-in-One HP All-in-One Windows Mac

Windows 1

1. HP All-in-One HP All-in-One 2. [] HP All-in-One 3. Windows HPDeskjet All-In-One F300 series 4. 5.
6. HP All-in-One HP All-in-One 7. HP All-in-One HP All-in-One 8. HP All-in-One 9. [] HP All-in-One HP All-in-One 10. HP Windows

HP HP (

Windows 2
1. Windows 2. / 3. HP PSC & Officejet 6.0/ 4. HP All-in-One 5. HP All-in-One HP All-in-One 6. HP All-in-One 7. HP All-in-One

Windows 3

Windows 1. HP All-in-One 2. 3. HP All-in-One
4. HP All-in-One HP All-in-One 5. HP All-in-One 6. 7. HP All-in-One
1. HP All-in-One Mac 2. :Hewlett-Packard 3. HP Uninstaller(HP ) 4. HP All-in-One HP All-in-One HP All-in-One 5. HP All-in-One 6. HP All-in-One Installer (HP All-in-One ) 7. HP All-in-One
HP www.hp.com/support HP All-in-One www.hp.com/support

1. HP All-in-One

2. HP All-in-One 3. 4. []

2. HP All-in-One 3.

4. []

1. 2.

3. 4. 5. 6. 7.
ID HP HP All-in-One HP // HP
HP HP HP HP /HP 1-866-234-1377 HP HP / HP www.hp.com/support/
HP www.hp.com/support / HP HP

HP /

a. HP All-in-One b. c. 2. HP All-in-One a. [] HP All-in-One b. HP All-in-One c. HP All-in-One d. [] HP All-in-One 3. HP www.hp.com/support / HP HP HP All-in-One 4. HP a. HP All-in-One b. c. d. e. ID 5. HP HP All-in-One ID
HP All-in-One ID HP All-in-One 10

[] [] [] ID

1-800-474-6836 (1-800-HP invent) ( )
HP www.hp.com/support/ www.hp.com/support/ HP
HP HP All-in-One USB HP All-in-One HP All-in-One

1. 2. 3.

HP All-in-One HP All-in-One 2 HP All-in-One
HP HP All-in-One () HP All-in-One

[] HP All-in-One

/ ()
Legal 4 x 6 (10 x 15 ) 8.5 x 11 (216 x 279 )

(20 ) 50 (20 ) 15

(100 (20 ) gsm) (100 (20 ) gsm) 110 (200 gsm) 20
(10 gsm) 145 (236 gsm) 20 20
Letter8.5 x 11 A4210 x 297 A5148 x 210 Executive7.25 x 10.5 Legal8.5 x 14

JIS (B5)182 x 257

10 4.1 x 9.5 A2111 x 146 DL110 x 220 C6114 x 162
Letter8.5 x 11 A4210 x 297
4 x x x 7 Executive7.25 x 10.x x x x 18 A6105 x 148.5 Hagaki100 x 148

76 x x x 178

76 x x 356
U.S. (LetterLegal Executive) ISO (A4, A5) JIS (B5)

1.8 1.8

12.7 13.7

6.4 3.3

() 1.8

5.4 (0.21 )

DPI
600 x 600 dpi 4800 x 1200 dpi LIDIL () 700 (dpi) 4800 x 1200 DPI 4800 x 1200 DPIx x dpi x x x x x x 300
1200 x 1200 dpi 4800 x 1200 dpi 1200 x 1200 dpi 4800 x 1200 dpi
9 () (dpi) 600 x x 12002 (dpi)x x 2400

(dpi) 300 x x 300

(dpi)x x 1200

400%

OCR Twain 1200 x 2400 ppi19200 ppi () (256 ) 21.6 x 29.7

16.25.9 4.5

80 W AC V ~ 1 A 50-60 Hz DC 32 V===560 mA15 V 16 V===530mA
C (F) C (F) 15% 80% () () C (F) HP All-in-One HP 3 (10 ) USB

HP www.hp.com/ support

Hewlett-Packard HP Commitment to the Environment www.hp.com/hpinfo/globalcitizenship/environment/index.html (O3) Energy consumption Energy usage drops significantly while in ENERGY STAR mode, which saves natural resources, and saves money without affecting the high performance of this product.This product and external power supply qualify for ENERGY STAR, which is a voluntary program established to encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency. For more information on ENERGY STAR guidelines, go to the following website: www.energystar.gov DIN 19309 EN 12281:2002 25 (MSDS) HP www.hp.com/go/msds HP HP / HP HP www.hp.com/recycle HP HP HP (HP Inkjet Supplies Recycling Program) /

www.hp.com/recycle

HP All-in-One / (Regulatory Model Number) SDGOB-0601 (HP Deskjet F300 All-in-One series) FCC statement The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product. Declaration of Conformity: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that might cause undesired operation. Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, might cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For more information, contact the Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-4100.

The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington DC, 20402. Stock No. 004-000-00345-4. Caution Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the Hewlett-Packard Company might cause harmful interference and void the FCC authorization to operate this equipment. Note lattention des utilisateurs canadien/notice to users in Canada Le prsent appareil numrique nmet pas de bruit radiolectrique dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. This digital apparatus does not exceed the Class B limits for radio noise emissions from the digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Notice to users in Australia This equipment complies with Australian EMC requirements. Notice to users in Korea
Declaration of conformity (European Economic Area) The Declaration of Conformity in this document complies with ISO/IEC Guide 22 and EN 45014. It identifies the product, manufacturers name and address, and applicable specifications recognized in the European community.
HP Deskjet F300 All-in-One series declaration of conformity
/ 10 x 15 4 x 6 , 16 A A4 , 15 C customer support 53 D declaration of conformity European Economic Area 65 United States 66 F FCC statement 64 H HP JetDirect 11 HP , 45 L legal 15 Legal 59 letter 15 Letter 59 R regulatory notices declaration of conformity (European Economic Area) 65 declaration of conformity (U.S.) 66 FCC statement 64 note lattention des utilisateurs Canadien 65 notice to users in Canada 65 notice to users in Korea 65 U USB 11 USB 41 USB 25 , 18 23 61 Mac 11 HP All-in-One , 47 10 x 4 x Alegal 15 letter 15 18
ID 53 WEEE 64 5 51 54 ID 53 , 4 , 27 38 45
24 4, 5 27 27. 42 , 21 HP All-in-One 28. , 4 45 , 62 , 53 62 USB 41
, 39 9 , 23 25 64 53. 13 62 39