The HP All-in-One at a glance

Label 9 10

Description Control panel On button Photosmart Express button (left) and Proof Sheet button (right) Memory card slots Input tray Paper tray extender Paper-width guide Print cartridge door Glass Lid backing
Chapter 1 HP All-in-One overview

Label 3

Description Rear door Rear USB port Power connection*
Use only with the power adapter supplied by HP.

Control panel buttons

Label 1
Name and Description Check Paper/Check Print Cartridge: Indicates the need to load paper, remove a paper jam, reinsert the print cartridge, replace the print cartridge, or close the print cartridge door. Cancel button: Stops a task or resets settings. Paper Type button: Changes the paper type setting to match the type of paper loaded in the paper tray (plain or photo paper). The default setting is plain paper. Quality button: Changes the copy quality. The default quality for plain paper is one star. The default quality for photo paper is two stars.

(continued)

Label 5
Name and Description Size button: Changes the image size to 100% (Actual Size), fits it to the page (Resize to Fit), or prints borderless images (Borderless). The default setting is 100% for plain paper and borderless for photo paper. Copies button: Specifies the desired number of copies. If there is an error, the letter E appears on the display. Start Copy Black button: Makes a black-and-white copy. In certain situations (for example, after clearing a paper jam), this button resumes printing. Start Copy Color button: Starts a color copy. In certain situations (for example, after clearing a paper jam), this button resumes printing. Start Scan/Reprints button: Starts a scan. On: Turns the HP All-in-One on or off. When the HP All-in-One is off, a minimal amount of power is still supplied to the device. To completely remove power, turn the HP All-in-One off, and then unplug the power cord. Photosmart Express button: Launches the HP Photosmart Express software application on your computer for printing, editing, and sharing photos. Proof Sheet button: Prints a proof sheet when a memory has been inserted in the HP All-in-One. A proof sheet shows thumbnail views of all the photos on the memory card. You can select photos on the proof sheet, then print those photos by scanning the proof sheet. You do not need to connect the HP Allin-One to a computer to print a proof sheet from a memory card.

The Check Paper, and Check Print Cartridge, and copy button lights are blinking.
The On, Check Paper, and Check Print Cartridge lights are blinking. All lights are blinking.
Scanner failure. Turn off the HP All-in-One, then on again. If the problem persists, contact HP Support. The HP All-in-One has a fatal error. 1. 2. 3. 4. Turn the HP All-in-One off. Unplug the power cord. Wait a minute, then plug the power cord back in. Turn the HP All-in-One back on.
If the problem persists, contact HP Support.
Use the HP Photosmart software
You can use the HP Photosmart software to access many features not available from the control panel. The HP Photosmart software provides a fast and easy way to make prints of your photos or to purchase prints online. It also provides access to other basic HP Photosmart software features, such as saving, viewing, and sharing your photos. For more information on using the HP Photosmart software, see the HP Photosmart Software Help.

Find more information

A variety of resources, both printed and onscreen, provide information about setting up and using the HP All-in-One. Setup Guide The Setup Guide provides instructions for setting up your HP All-in-One and installing software. Make sure you follow the steps in the Setup Guide in order. If you have problems during setup, see Troubleshooting in the last section of the Setup Guide, or see Troubleshooting and support on page 18 in this guide. HP Photosmart Software Tour (Windows) The HP Photosmart Software Tour is a fun, interactive way to get a brief overview of the software included with your HP All-in-One. You'll learn how the software you installed with your HP All-in-One can help you edit, organize, and print your photos. Onscreen Help The onscreen Help provides detailed instructions on features of your HP All-inOne that are not described in this User Guide, including features that are only available using the software you installed with your HP All-in-One. For more information, see Access the onscreen Help on page 8. Readme The Readme file contains the most recent information which might be not be found in other publications. Install the software to access the Readme file. www.hp.com/support If you have Internet access, you can get help and support from the HP website. This website offers technical support, drivers, supplies, and ordering information.

Access the onscreen Help

Make a copy

You can make quality copies from the control panel. To make a copy from the control panel 1. Make sure you have paper loaded in the input tray. 2. Load your original print side down in the right front corner of the glass. 3. Press Start Copy Black or Start Copy Color to begin copying.

Scan an image

You can start a scan from your computer or from the HP All-in-One. This section explains how to scan from the control panel of the HP All-in-One only. To use the scan features, the HP All-in-One and computer must be connected and turned on. The HP Photosmart Software (Windows) or HP Photosmart Mac Software (Mac) must also be installed and running on your computer prior to scanning. On a Windows computer, look for the HP Digital Imaging Monitor icon in the Windows system tray (at the lower right side of the screen, near the time) to verify the software is running.
Note Closing the HP Digital Imaging Monitor icon in the Windows system tray can cause the HP All-in-One to lose some of its scan functionality. If this happens, you can restore full functionality by restarting your computer or by starting the HP Photosmart Software. On a Mac, the software is always running. Tip You can use the HP Photosmart Software (Windows) or HP Photosmart Mac Software (Mac) to scan images, including panorama images. Using this software, you can also edit, print, and even share your scanned images. For more information, see the onscreen Help that came with the HP All-in-One. To scan to a computer 1. Place your original print side down on the left front corner of the glass. 2. Press Start Scan/Reprints. A preview image of the scan appears on your computer, where you can edit it. 3. Make any edits to the preview image, and then click Accept when you are finished.
Print photos using a proof sheet
A proof sheet is a simple and convenient way to select photos and make prints directly from a memory card without the need for a computer. A proof sheet (which might be several pages long) shows thumbnail views of photos stored on the memory card. The file name, index number, and date appear under each thumbnail. Proof sheets are also a quick way to create a printed catalog of your photos.

Note From the HP All-in-One, you can only access JPEG and TIFF image files. To print other types of files, transfer the files from your memory card to your computer and use the HP Photosmart Software.
In order to print photos from a proof sheet you must complete the following tasks, explained in detail in the procedures below. Print a proof sheet of the photos on your memory card Complete the proof sheet Scan the proof sheet
To print a proof sheet 1. Remove any orignals loaded on the glass. 2. Insert a memory card into the appropriate slot on the HP All-in-One. The HP All-in-One supports the memory cards described below. Each type of memory card can only be inserted in the appropriate slot for that card.
Top left slot: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card, Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied adapter), Memory Stick Pro, xD-Picture Card Top right slot: Memory Stick Duo (without user-supplied adapter) Bottom slot: CompactFlash (I, II) Press the Proof Sheet button (located above the memory card slots). The Proof Sheet button is the button on the right.
The HP All-in-One prints a proof sheet. When the proof sheet finishes printing, follow the instructions on the proof sheet to select the photos you want to print., and then scan the proof sheet.
To scan a completed proof sheet 1. Load the proof sheet print side down on the right front corner of the glass. Make sure the sides of the proof sheet touch the right and front edges. Close the lid.

2. 3. 4.

Make sure the same memory card you used to print the proof sheet is still inserted in the HP All-in-One when you scan that proof sheet. Make sure you have photo paper loaded in the input tray. Press Proof Sheet. The HP All-in-One scans the proof sheet and prints the selected photos.
Print from a software application
Most print settings are automatically handled by the software application. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features. To print from a software application (Windows) 1. Make sure you have paper loaded in the input tray. 2. On the File menu in your software application, click Print. 3. Make sure the HP All-in-One is the selected printer. 4. If you need to change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. 5. Select the appropriate options for your print job by using the features available on the various tabs. 6. Click OK to close the Properties dialog box. 7. Click Print or OK to begin printing. To print from a software application (Mac) 1. Make sure you have paper loaded in the input tray. 2. From the File menu in your software application, choose Page Setup. 3. Make sure the HP All-in-One is the selected printer. 4. Specify the page attributes: Choose the paper size. Select the orientation. Enter the scaling percentage. 5. Click OK. 6. From the File menu in your software application, choose Print.

The Print dialog box appears, and the Copies & Pages panel opens. Change the print settings for each option in the pop-up menu, as appropriate for your project. Click Print to begin printing.
Replace the print cartridges
Follow these instructions when the ink level is low. Note When the ink level for the print cartridge is low, a message appears on your computer screen. You can also check the ink levels by using the software installed with the HP All-in-One. When you receive a low-ink warning message, make sure you have a replacement print cartridge available. You should also replace the print cartridges when you see faded text or if you experience print quality issues related to the print cartridges. To order print cartridges for the HP All-in-One, go to www.hp.com/learn/suresupply. If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page. To replace the print cartridges 1. Make sure the HP All-in-One is on. Caution If the HP All-in-One is off when you open the print cartridge door to access the print cartridges, the HP All-in-One will not release the cartridges for changing. You might damage the HP All-in-One if the print cartridges are not docked safely when you try to remove them. 2. 3. Make sure you have letter or A4 unused plain white paper loaded in the input tray. Open the print cartridge door. The print carriage moves to the far right side of the HP All-in-One.
Wait until the print carriage is idle and silent, and then lightly press down on a print cartridge to release it. If you are replacing the tri-color print cartridge, remove the print cartridge from the slot on the left. If you are replacing the black or photo print cartridge, remove the print cartridge from the slot on the right.
Print cartridge slot for the tri-color print cartridge Print cartridge slot for the black and photo print cartridges
Pull the print cartridge toward you out of its slot. If you are removing the black print cartridge in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector or an airtight plastic container. If you are removing the print cartridge because it is low or out of ink, recycle the print cartridge. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges free of charge. For more information, go to the following website: www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html Remove the new print cartridge from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape by using the pink pull tab.
Copper-colored contacts Plastic tape with pink pull tab (must be removed before installing) Ink nozzles under tape

Caution Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
Slide the new print cartridge forward into the empty slot. Then gently push on the upper part of the print cartridge forward until it clicks into the socket. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing a black or photo print cartridge, slide it into the right slot.
Close the print cartridge door.
If you installed a new print cartridge, the HP All-in-One prints a print cartridge alignment sheet. Note If you have colored paper loaded in the input tray when you align the print cartridges, the alignment will fail. Load unused plain white paper into the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Clean the HP All-in-One

To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP All-in-One. Clean the glass Clean the lid backing

Clean the glass

Glass that is dirty from fingerprints, smudges, hair, and dust on the main glass surface slows down performance and affects the accuracy of some features. To clean the glass 1. Turn off the HP All-in-One, unplug the power cord, and raise the lid. 2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. Caution Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device. 3. 4. Dry the glass with a dry, soft, lint-free cloth to prevent spotting. Plug in the power cord, and then turn on the HP All-in-One.

Clean the lid backing

Minor debris can accumulate on the white document backing located underneath the lid of the HP All-in-One. To clean the lid backing 1. Turn off the HP All-in-One, unplug the power cord, and raise the lid. 2. Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. Wash the backing gently to loosen debris. Do not scrub the backing. 3. Dry the backing with a dry, soft, lint-free cloth. Caution Do not use paper-based wipes, as these might scratch the backing. 4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. Caution Be careful not to spill alcohol on the glass or exterior of the HP All-in-One, as this might damage the device. 5. Plug in the power cord, and then turn on the HP All-in-One.

Troubleshooting and support
This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen Help that came with your software. Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP Allin-One to your computer before the software installation screen prompts you to do so, you must follow these steps: Troubleshooting common setup issues

1. 2. 3. 4. 5.

Disconnect the USB cable from the computer. Uninstall the software (if you have already installed it). Restart your computer. Turn off the HP All-in-One, wait one minute, then restart it. Reinstall the HP All-in-One software. Caution Do not connect the USB cable to the computer until prompted by the software installation screen.
For support contact information, see the inside back cover of this guide.
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One. To uninstall from a Windows computer and then reinstall 1. 2. 3. 4. 5. On the Windows taskbar, click Start, Settings, Control Panel. Double-click Add/Remove Programs. Select the HP All-in-One, and then click Change/Remove. Follow the onscreen instructions. Disconnect the HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 6. 7. Insert the HP All-in-One CD-ROM into your computers CD-ROM drive and then start the Setup program. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.
When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray. To verify that the software is properly installed, double-click the HP Solution Center icon on the desktop. If the HP Solution Center shows the essential icons (Scan Picture and Scan Document), the software has been properly installed.
To uninstall from a Mac and then reinstall 1. 2. 3. 4. 5. 6. 7. Disconnect the HP All-in-One from your Mac. Open the Applications:Hewlett-Packard folder. Double-click HP Uninstaller. Follow the onscreen instructions. After the software is uninstalled, restart your computer. To reinstall the software, insert the HP All-in-One CD-ROM into your computers CD-ROM drive. On the desktop, open the CD-ROM and then double-click HP All-in-One Installer. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.

Hardware setup troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-in-One hardware. The HP All-in-One will not turn on Cause The HP All-in-One is not properly connected to a power supply. Solution Make sure the power cord is firmly connected to both the HP All-in-One and the power adaptor. Plug the power cord into a grounded power outlet, surge protector, or power strip. Troubleshooting and support
Power connection Power cord and adaptor Grounded power outlet
If you are using a power strip, make sure the power strip is on. Or, try plugging the HP All-in-One directly into a grounded power outlet. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the HP All-in-One into a switched outlet, make sure the switch is on. If it is switched to on but still does not work, then there might be a problem with the power outlet.
Cause You pressed the On button too quickly.
Chapter 2 Solution The HP All-in-One might not respond if you press the On button too quickly. Press the On button once. It might take a few minutes for the HP All-in-One to turn on. If you press the On button again during this time, you might turn the device off. Warning If the HP All-in-One still does not turn on, it might have a mechanical failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to: www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
I connected the USB cable, but I am having problems using the HP All-in-One with my computer Cause The USB cable was connected before the software was installed. Connecting the USB cable before prompted can cause errors. Solution You must first install the software that came with the HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Once you have installed the software, connecting your computer to the HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer.

The lights on the HP All-in-One flash in special sequences to inform you about various error conditions. For more information on solving error conditions based on the status lights, see Status light overview on page 5.

Clear paper jams

If the HP All-in-One has a paper jam, first check the rear door. If the jammed paper is not in the rear rollers, check the front door. To clear a paper jam from the rear door 1. Press in the tab on the left side of the rear door to release the door. Remove the door by pulling it away from the HP All-in-One.
Gently pull the paper out of the rollers.
Chapter 2 Caution If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If you do not remove all the pieces of paper from the HP All-in-One, more paper jams are likely to occur. 3. 4. Replace the rear door. Gently push the door forward until it snaps into place. Press Start Copy Black or Start Copy Color to continue the current job.
To clear a paper jam from the front door 1. If necessary, pull the input tray down to open it. Then, lower the print cartridge door.
Gently pull the paper out of the rollers. Caution If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If you do not remove all the pieces of paper from the HP All-in-One, more paper jams are likely to occur.
Press Start Copy Black to continue the current job.
Print cartridge troubleshooting
If you are experiencing problems with printing, you might have a problem with one of the print cartridges. To troubleshoot print cartridges 1. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts. Check for possible damage to the copper-colored contacts or ink nozzles. Make sure the plastic tape has been removed. If it is still covering the ink nozzles, gently remove the plastic tape by using the pink pull tab. Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forward until it clicks into the socket.

5. 6. 7.

Repeat steps 1 and 2 for the tri-color print cartridge on the left side. If the problem persists, print a self-test report to determine if there is a problem with the print cartridges. This report provides useful information about your print cartridges, including status information. If the self-test report shows a problem, clean the print cartridges. If the problem persists, clean the copper-colored contacts of the print cartridges. If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it.

For more information, see the onscreen Help.
Before you call HP customer support
Software programs from other companies might be included with the HP All-in-One. If you experience problems with any of those programs, you will receive the best technical assistance by calling the experts at that company. If you need to contact HP Customer Support, do the following before you call: 1. Make sure that: a. The HP All-in-One is plugged in and turned on. b. The specified print cartridges are installed correctly. c. The recommended paper is properly loaded in the input tray. Reset the HP All-in-One: a. Turn off the HP All-in-One by pressing the On button. b. Unplug the power cord from the back of the HP All-in-One. c. Plug the power cord back into the HP All-in-One. d. Turn on the HP All-in-One by pressing the On button. To find support and warranty information, go to the HP website at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Check the HP website for updated information or troubleshooting tips for the HP All-in-One. If you are still experiencing problems and need to speak with an HP Customer Support Representative, do the following: a. Have the specific name of the HP All-in-One, as it appears on the control panel, available. b. Print a self-test report. (See below.) c. Make a color copy to have available as a sample printout. d. Be prepared to describe your problem in detail. e. Have your serial number and service ID ready, found on the self-test report. Call HP Customer Support. Be near the HP All-in-One when you call.
To print a self-test report 1. 2. Press and hold Cancel on the control panel. While holding Cancel, press Start Copy Color. The self-test report prints, containing the serial number and service ID.

Technical information

The technical specifications and international regulatory information for the HP All-in-One are provided in this section.

System requirements

Software system requirements are located in the Readme file.

Paper specifications

This section contains information about paper tray capacities and paper sizes.

Paper tray capacities

Type Plain paper Legal paper Cards Envelopes Technical information Transparency film Labels 4 x 6 inch (10 x 15 cm) Photo paper 8.5 x 11 inch (216 x 279 mm) Photo paper * Paper weight 20 to 24 lb. (75 to 90 gsm) 20 to 24 lb. (75 to 90 gsm) 110 lb. index max (200 gsm) 20 to 24 lb. (75 to 90 gsm) N/A N/A 145 lb. (236 gsm) N/A Paper tray* 100 (20 lb. paper) 100 (20 lb. paper 20 Output tray 50 (20 lb. paper) 50 (20 lb. paper) 15 or fewer 10 15
Maximum capacity. Output tray capacity is affected by the type of paper and the amount of ink you are using. HP recommends emptying the output tray frequently.

Paper sizes

For a complete list of supported media sizes, see the printer software.

Print specifications

Up to 1200 x 1200 rendered dpi black when printing from a computer Up to 4800 x 1200 optimized dpi color when printing from a computer and 1200-input dpi Print speeds vary according to the complexity of the document Panorama-size printing Method: drop-on-demand thermal inkjet Language: PCL3 GUI Duty cycle: Up to 3000 printed pages per month

Copy specifications

Up to 4800x1200 optimized dpi output using a scan resolution of 1200x1200ppi when copying onto premium photo media Digital image processing Up to 9 copies from original (varies by model) Fit to page Copy speeds vary according to the complexity of the document

Scan specifications

Image editor included Integrated OCR software automatically converts scanned text to editable text (if installed) Twain-compliant interface Resolution: up to 1200 x 2400 dpi optical (varies by model); 19200 dpi enhanced (software) Color: 48-bit color, 8-bit grayscale (256 levels of gray) Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)

Physical specifications

Height: 16.97 cm (7.0 inches) Width: 44 cm (16.8 inches) Depth: 25.9 cm (10.2 inches) Weight: 4.5 kg (10 pounds)

Power specifications

Power consumption: 25 watts maximum (average printing) Input voltage: AC 100 to 240 V ~ 1 A 5060 Hz, grounded Output voltage: DC 32 V===560 mA, 15 V or 16 V===530mA Note Use only with the power adapter supplied by HP. Technical information
Environmental specifications
Recommended operating temperature range: 15 to 32 C (59 to 90 F) Allowable operating temperature range: 5 to 35 C (41 to 95 F) Humidity: 15% to 80% RH non-condensing Non-operating (Storage) temperature range: 20 to 50 C (4 to 122 F) In the presence of high electromagnetic fields, it is possible the output from the HP All-inOne may be slightly distorted HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields

Acoustic information

If you have Internet access, you can get acoustic information from the HP website. Go to: www.hp.com/support.
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in a environmentally sound manner. For information on HP's Environmental product stewardship program, see the onscreen Help.

Chapter 3

Regulatory notices
The HP All-in-One meets product requirements from regulatory agencies in your country/region. For a complete listing of regulatory notices, see the onscreen Help.
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SDGOB-0603. This regulatory number should not be confused with the marketing name (HP Photosmart C3100 All-in-One series, etc.) or product numbers (Q8150A, etc.).

Warranty

HP product Software Print cartridges Duration of limited warranty 90 days Until the HP ink is depleted or the end of warranty date printed on the cartridge has been reached, whichever occurs first. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with. 1 year

Accessories

Printer peripheral hardware (see the following for details) 1 year A. Extent of limited warranty 1. Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above will be free from defects in materials and workmanship for the duration specified above, which duration begins on the date of purchase by the customer. 2. For software products, HP's limited warranty applies only to a failure to execute programming instructions. HP does not warrant that the operation of any product will be uninterrupted or error free. 3. HP's limited warranty covers only those defects that arise as a result of normal use of the product, and does not cover any other problems, including those that arise as a result of: a. Improper maintenance or modification; b. Software, media, parts, or supplies not provided or supported by HP; c. Operation outside the product's specifications; d. Unauthorized modification or misuse. 4. For HP printer products, the use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer. However, if printer failure or damage is attributable to the use of a non-HP or refilled ink cartridge, HP will charge its standard time and materials charges to service the printer for the particular failure or damage. 5. If HP receives, during the applicable warranty period, notice of a defect in any product which is covered by HP's warranty, HP shall either repair or replace the product, at HP's option. 6. If HP is unable to repair or replace, as applicable, a defective product which is covered by HP's warranty, HP shall, within a reasonable time after being notified of the defect, refund the purchase price for the product. 7. HP shall have no obligation to repair, replace, or refund until the customer returns the defective product to HP. 8. Any replacement product may be either new or like-new, provided that it has functionality at least equal to that of the product being replaced. 9. HP products may contain remanufactured parts, components, or materials equivalent to new in performance. 10. HP's Limited Warranty Statement is valid in any country where the covered HP product is distributed by HP. Contracts for additional warranty services, such as on-site service, may be available from any authorized HP service facility in countries where the product is distributed by HP or by an authorized importer. B. Limitations of warranty TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS MAKES ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. C. Limitations of liability 1. To the extent allowed by local law, the remedies provided in this Warranty Statement are the customer's sole and exclusive remedies. 2. TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THIS WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. D. Local law 1. This Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state in the United States, from province to province in Canada, and from country to country elsewhere in the world. 2. To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the customer. For example, some states in the United States, as well as some governments outside the United States (including provinces in Canada), may: a. Preclude the disclaimers and limitations in this Warranty Statement from limiting the statutory rights of a consumer (e.g., the United Kingdom); b. Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or c. Grant the customer additional warranty rights, specify the duration of implied warranties which the manufacturer cannot disclaim, or allow limitations on the duration of implied warranties. 3. THE TERMS IN THIS WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THE HP PRODUCTS TO SUCH CUSTOMERS. HP Limited Warranty Dear Customer, You will find below the name and address of the HP entity responsible for the performance of the HP Limited Warranty in your country. You may have additional statutory rights against the seller based on your purchase agreement. Those rights are not in any way affected by this HP Limited Warranty. Ireland: Hewlett-Packard Ireland Ltd. 30 Herbert Street IRL-Dublin 2 United Kingdom: Hewlett-Packard Ltd, Cain Road, Bracknell, GB-Berks RG12 1HN

Symbols/Numerics 10 x 15 cm photo paper specifications 24 B buttons, control panel 4 C cancel button 4 clean glass 17 lid backing 17 connection problems HP All-in-One does not turn on 19 control panel buttons 4, copy make a copy 10 specifications 25 customer support contact 23 E envelopes specifications 24 environment Environmental product stewardship program environmental specifications 25 G glass clean L labels specifications legal paper specifications letter paper specifications lid backing, clean R regulatory notices regulatory model identification number 26 reinstall software 18 replace print cartridges 14 S scan documents 10 photos 10 scan specifications 25 scan button 5 scan glass clean 17 software application, print from 13 software installation reinstall 18 uninstall 18 specifications. See technical information start black 5 start color 5 status lights overview 5 system requirements 24 T technical information copy specifications 25 environmental specifications 25 paper sizes 24 paper specifications 24 paper tray capacities 24 physical specifications 25 power specifications 25 print specifications 24 scan specifications 25 system requirements 24 weight 25 telephone numbers, customer support 23 transparencies specifications 24 troubleshoot
M maintenance clean glass 17 clean lid backing 17 replace print cartridges 14 make a copy 10 memory cards proof sheet 11 slots 2 O on button
H help use onscreen Help 8 Hewlett-Packard Company notices 2 J jams, paper 10
P paper jams 10, 21 paper sizes 24 specifications 24 paper tray capacities 24 phone numbers, customer support 23 photo paper specifications 24 Photosmart Express 5 physical specifications 25 power specifications 25 print from software application 13 proof sheet 11 specifications 24 print cartridges replace 14 troubleshoot 22 proof sheet print 11
Index hardware installation 19 jams, paper 10 print cartridges 22 USB cable 20 U uninstall software 18 USB cable installation 20

www.hp.com/support

280 Argentina (Buenos Aires) Argentina Australia Australia (out-of-warranty) sterreich 17212049 Belgi Belgique Brasil (Sao Paulo) Brasil www.hp.com/support www.hp.com/support 55-11-4004-7751 0-800-709-7751 54-11-4708-1600 0-800-555-910 www.hp.com/support Luxembourg Malaysia Mauritius 47 1588-3003 www.hp.com/support (262) 404 0570-000511 03-3335-9800
Mxico (Ciudad de Mxico) 55-5258-9922 Mxico 010 Nederland New Zealand Nigeria Norge 24791773 www.hp.com/support www.hp.com/support 01-800-472-68368